diff options
Diffstat (limited to 'include')
163 files changed, 312 insertions, 249 deletions
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index d41c9488521..f1380287ed4 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -290,7 +290,7 @@ struct acpi_table_fadt { #define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */ #define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local x_aPICs must use physical dest mode (ACPI 3.0) */ -/* Values for preferred_profile (Prefered Power Management Profiles) */ +/* Values for preferred_profile (Preferred Power Management Profiles) */ enum acpi_prefered_pm_profiles { PM_UNSPECIFIED = 0, diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index f2d2faf4d9a..e5a3f588000 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -194,6 +194,13 @@ extern void warn_slowpath_null(const char *file, const int line); #ifdef CONFIG_SMP # define WARN_ON_SMP(x) WARN_ON(x) #else +/* + * Use of ({0;}) because WARN_ON_SMP(x) may be used either as + * a stand alone line statement or as a condition in an if () + * statement. + * A simple "0" would cause gcc to give a "statement has no effect" + * warning. + */ # define WARN_ON_SMP(x) ({0;}) #endif diff --git a/include/asm-generic/siginfo.h b/include/asm-generic/siginfo.h index 942d30b5aab..0dd4e87f6fb 100644 --- a/include/asm-generic/siginfo.h +++ b/include/asm-generic/siginfo.h @@ -192,7 +192,7 @@ typedef struct siginfo { * SIGBUS si_codes */ #define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */ -#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */ +#define BUS_ADRERR (__SI_FAULT|2) /* non-existent physical address */ #define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */ /* hardware memory error consumed on a machine check: action required */ #define BUS_MCEERR_AR (__SI_FAULT|4) diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 32c45e5fe0a..bd297a20ab9 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -773,7 +773,7 @@ * the sections that has this restriction (or similar) * is located before the ones requiring PAGE_SIZE alignment. * NOSAVE_DATA starts and ends with a PAGE_SIZE alignment which - * matches the requirment of PAGE_ALIGNED_DATA. + * matches the requirement of PAGE_ALIGNED_DATA. * * use 0 as page_align if page_aligned data is not used */ #define RW_DATA_SECTION(cacheline, pagealigned, inittask) \ diff --git a/include/drm/drmP.h b/include/drm/drmP.h index ad5770f2315..202424d17ed 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -95,7 +95,7 @@ struct drm_device; * drm_core, drm_driver, drm_kms * drm_core level can be used in the generic drm code. For example: * drm_ioctl, drm_mm, drm_memory - * The macro definiton of DRM_DEBUG is used. + * The macro definition of DRM_DEBUG is used. * DRM_DEBUG(fmt, args...) * The debug info by using the DRM_DEBUG can be obtained by adding * the boot option of "drm.debug=1". @@ -808,7 +808,7 @@ struct drm_driver { * * \return Flags, or'ed together as follows: * - * DRM_SCANOUTPOS_VALID = Query successfull. + * DRM_SCANOUTPOS_VALID = Query successful. * DRM_SCANOUTPOS_INVBL = Inside vblank. * DRM_SCANOUTPOS_ACCURATE = Returned position is accurate. A lack of * this flag means that returned position may be offset by a constant diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 60edf9be31e..d94684b7ba3 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -65,7 +65,7 @@ enum drm_mode_status { MODE_H_ILLEGAL, /* mode has illegal horizontal timings */ MODE_V_ILLEGAL, /* mode has illegal horizontal timings */ MODE_BAD_WIDTH, /* requires an unsupported linepitch */ - MODE_NOMODE, /* no mode with a maching name */ + MODE_NOMODE, /* no mode with a matching name */ MODE_NO_INTERLACE, /* interlaced mode not supported */ MODE_NO_DBLESCAN, /* doublescan mode not supported */ MODE_NO_VSCAN, /* multiscan mode not supported */ @@ -321,7 +321,7 @@ struct drm_crtc_funcs { /* * Flip to the given framebuffer. This implements the page - * flip ioctl descibed in drm_mode.h, specifically, the + * flip ioctl described in drm_mode.h, specifically, the * implementation must return immediately and block all * rendering to the current fb until the flip has completed. * If userspace set the event flag in the ioctl, the event @@ -778,6 +778,7 @@ extern int drm_mode_gamma_get_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_gamma_set_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern u8 *drm_find_cea_extension(struct edid *edid); extern bool drm_detect_hdmi_monitor(struct edid *edid); extern bool drm_detect_monitor_audio(struct edid *edid); extern int drm_mode_page_flip_ioctl(struct drm_device *dev, diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h index b1e7809e5e1..c2f93a8ae2e 100644 --- a/include/drm/drm_mm.h +++ b/include/drm/drm_mm.h @@ -56,7 +56,7 @@ struct drm_mm_node { }; struct drm_mm { - /* List of all memory nodes that immediatly preceed a free hole. */ + /* List of all memory nodes that immediately precede a free hole. */ struct list_head hole_stack; /* head_node.node_list is the list of all memory nodes, ordered * according to the (increasing) start address of the memory node. */ diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h index ae6b7a3dbec..c4961ea50a4 100644 --- a/include/drm/drm_mode.h +++ b/include/drm/drm_mode.h @@ -277,7 +277,7 @@ struct drm_mode_mode_cmd { #define DRM_MODE_CURSOR_MOVE (1<<1) /* - * depending on the value in flags diffrent members are used. + * depending on the value in flags different members are used. * * CURSOR_BO uses * crtc diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 820ee902948..816e30cbd96 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -472,6 +472,8 @@ {0x1002, 0x9803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x9804, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9806, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9807, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0, 0, 0} #define r128_PCI_IDS \ diff --git a/include/drm/mga_drm.h b/include/drm/mga_drm.h index c16097f99be..fca817009e1 100644 --- a/include/drm/mga_drm.h +++ b/include/drm/mga_drm.h @@ -107,7 +107,7 @@ */ #define MGA_NR_SAREA_CLIPRECTS 8 -/* 2 heaps (1 for card, 1 for agp), each divided into upto 128 +/* 2 heaps (1 for card, 1 for agp), each divided into up to 128 * regions, subject to a minimum region size of (1<<16) == 64k. * * Clients may subdivide regions internally, but when sharing between diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h index 3dec41cf834..3bce1a4fc30 100644 --- a/include/drm/radeon_drm.h +++ b/include/drm/radeon_drm.h @@ -641,7 +641,7 @@ typedef struct drm_radeon_vertex2 { } drm_radeon_vertex2_t; /* v1.3 - obsoletes drm_radeon_vertex2 - * - allows arbitarily large cliprect list + * - allows arbitrarily large cliprect list * - allows updating of tcl packet, vector and scalar state * - allows memory-efficient description of state updates * - allows state to be emitted without a primitive diff --git a/include/drm/savage_drm.h b/include/drm/savage_drm.h index 4863cf6bf96..818d49be2e6 100644 --- a/include/drm/savage_drm.h +++ b/include/drm/savage_drm.h @@ -29,7 +29,7 @@ #ifndef __SAVAGE_SAREA_DEFINES__ #define __SAVAGE_SAREA_DEFINES__ -/* 2 heaps (1 for card, 1 for agp), each divided into upto 128 +/* 2 heaps (1 for card, 1 for agp), each divided into up to 128 * regions, subject to a minimum region size of (1<<16) == 64k. * * Clients may subdivide regions internally, but when sharing between diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h index 50852aad260..62a0e4c4cee 100644 --- a/include/drm/ttm/ttm_bo_api.h +++ b/include/drm/ttm/ttm_bo_api.h @@ -50,10 +50,10 @@ struct drm_mm_node; * * @fpfn: first valid page frame number to put the object * @lpfn: last valid page frame number to put the object - * @num_placement: number of prefered placements - * @placement: prefered placements - * @num_busy_placement: number of prefered placements when need to evict buffer - * @busy_placement: prefered placements when need to evict buffer + * @num_placement: number of preferred placements + * @placement: preferred placements + * @num_busy_placement: number of preferred placements when need to evict buffer + * @busy_placement: preferred placements when need to evict buffer * * Structure indicating the placement you request for an object. */ @@ -158,9 +158,9 @@ struct ttm_tt; * the object is destroyed. * @event_queue: Queue for processes waiting on buffer object status change. * @mem: structure describing current placement. - * @persistant_swap_storage: Usually the swap storage is deleted for buffers + * @persistent_swap_storage: Usually the swap storage is deleted for buffers * pinned in physical memory. If this behaviour is not desired, this member - * holds a pointer to a persistant shmem object. + * holds a pointer to a persistent shmem object. * @ttm: TTM structure holding system pages. * @evicted: Whether the object was evicted without user-space knowing. * @cpu_writes: For synchronization. Number of cpu writers. @@ -221,7 +221,7 @@ struct ttm_buffer_object { */ struct ttm_mem_reg mem; - struct file *persistant_swap_storage; + struct file *persistent_swap_storage; struct ttm_tt *ttm; bool evicted; @@ -459,9 +459,9 @@ extern void ttm_bo_synccpu_write_release(struct ttm_buffer_object *bo); * user buffer object. * @interruptible: If needing to sleep to wait for GPU resources, * sleep interruptible. - * @persistant_swap_storage: Usually the swap storage is deleted for buffers + * @persistent_swap_storage: Usually the swap storage is deleted for buffers * pinned in physical memory. If this behaviour is not desired, this member - * holds a pointer to a persistant shmem object. Typically, this would + * holds a pointer to a persistent shmem object. Typically, this would * point to the shmem object backing a GEM object if TTM is used to back a * GEM user interface. * @acc_size: Accounted size for this object. @@ -490,7 +490,7 @@ extern int ttm_bo_init(struct ttm_bo_device *bdev, uint32_t page_alignment, unsigned long buffer_start, bool interrubtible, - struct file *persistant_swap_storage, + struct file *persistent_swap_storage, size_t acc_size, void (*destroy) (struct ttm_buffer_object *)); /** @@ -506,9 +506,9 @@ extern int ttm_bo_init(struct ttm_bo_device *bdev, * user buffer object. * @interruptible: If needing to sleep while waiting for GPU resources, * sleep interruptible. - * @persistant_swap_storage: Usually the swap storage is deleted for buffers + * @persistent_swap_storage: Usually the swap storage is deleted for buffers * pinned in physical memory. If this behaviour is not desired, this member - * holds a pointer to a persistant shmem object. Typically, this would + * holds a pointer to a persistent shmem object. Typically, this would * point to the shmem object backing a GEM object if TTM is used to back a * GEM user interface. * @p_bo: On successful completion *p_bo points to the created object. @@ -528,7 +528,7 @@ extern int ttm_bo_create(struct ttm_bo_device *bdev, uint32_t page_alignment, unsigned long buffer_start, bool interruptible, - struct file *persistant_swap_storage, + struct file *persistent_swap_storage, struct ttm_buffer_object **p_bo); /** diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h index efed0820d9f..09af2d746d1 100644 --- a/include/drm/ttm/ttm_bo_driver.h +++ b/include/drm/ttm/ttm_bo_driver.h @@ -122,7 +122,7 @@ struct ttm_backend { #define TTM_PAGE_FLAG_USER_DIRTY (1 << 2) #define TTM_PAGE_FLAG_WRITE (1 << 3) #define TTM_PAGE_FLAG_SWAPPED (1 << 4) -#define TTM_PAGE_FLAG_PERSISTANT_SWAP (1 << 5) +#define TTM_PAGE_FLAG_PERSISTENT_SWAP (1 << 5) #define TTM_PAGE_FLAG_ZERO_ALLOC (1 << 6) #define TTM_PAGE_FLAG_DMA32 (1 << 7) @@ -223,9 +223,9 @@ struct ttm_mem_type_manager_func { * @mem::mm_node should be set to a non-null value, and * @mem::start should be set to a value identifying the beginning * of the range allocated, and the function should return zero. - * If the memory region accomodate the buffer object, @mem::mm_node + * If the memory region accommodate the buffer object, @mem::mm_node * should be set to NULL, and the function should return 0. - * If a system error occured, preventing the request to be fulfilled, + * If a system error occurred, preventing the request to be fulfilled, * the function should return a negative error code. * * Note that @mem::mm_node will only be dereferenced by @@ -714,7 +714,7 @@ extern void ttm_tt_cache_flush(struct page *pages[], unsigned long num_pages); */ extern int ttm_tt_set_placement_caching(struct ttm_tt *ttm, uint32_t placement); extern int ttm_tt_swapout(struct ttm_tt *ttm, - struct file *persistant_swap_storage); + struct file *persistent_swap_storage); /* * ttm_bo.c @@ -841,7 +841,7 @@ extern void ttm_mem_io_unlock(struct ttm_mem_type_manager *man); * different order, either by will or as a result of a buffer being evicted * to make room for a buffer already reserved. (Buffers are reserved before * they are evicted). The following algorithm prevents such deadlocks from - * occuring: + * occurring: * 1) Buffers are reserved with the lru spinlock held. Upon successful * reservation they are removed from the lru list. This stops a reserved buffer * from being evicted. However the lru spinlock is released between the time diff --git a/include/drm/vmwgfx_drm.h b/include/drm/vmwgfx_drm.h index 650e6bf6f69..5c36432d9ce 100644 --- a/include/drm/vmwgfx_drm.h +++ b/include/drm/vmwgfx_drm.h @@ -592,7 +592,7 @@ struct drm_vmw_stream_arg { /** * DRM_VMW_UPDATE_LAYOUT - Update layout * - * Updates the prefered modes and connection status for connectors. The + * Updates the preferred modes and connection status for connectors. The * command conisits of one drm_vmw_update_layout_arg pointing out a array * of num_outputs drm_vmw_rect's. */ diff --git a/include/keys/ceph-type.h b/include/keys/ceph-type.h new file mode 100644 index 00000000000..f69c4ac197a --- /dev/null +++ b/include/keys/ceph-type.h @@ -0,0 +1,8 @@ +#ifndef _KEYS_CEPH_TYPE_H +#define _KEYS_CEPH_TYPE_H + +#include <linux/key.h> + +extern struct key_type key_type_ceph; + +#endif diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h index 24d26efd143..e82e3ee2c54 100644 --- a/include/linux/amba/clcd.h +++ b/include/linux/amba/clcd.h @@ -136,7 +136,7 @@ struct clcd_board { int (*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var); /* - * Compulsary. Decode fb->fb.var into regs->*. In the case of + * Compulsory. Decode fb->fb.var into regs->*. In the case of * fixed timing, set regs->* to the register values required. */ void (*decode)(struct clcd_fb *fb, struct clcd_regs *regs); diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index f60227088b7..21114810c7c 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -30,15 +30,15 @@ struct dma_chan; * @cd_invert: true if the gpio_cd pin value is active low * @capabilities: the capabilities of the block as implemented in * this platform, signify anything MMC_CAP_* from mmc/host.h - * @dma_filter: function used to select an apropriate RX and TX + * @dma_filter: function used to select an appropriate RX and TX * DMA channel to be used for DMA, if and only if you're deploying the * generic DMA engine * @dma_rx_param: parameter passed to the DMA allocation - * filter in order to select an apropriate RX channel. If + * filter in order to select an appropriate RX channel. If * there is a bidirectional RX+TX channel, then just specify * this and leave dma_tx_param set to NULL * @dma_tx_param: parameter passed to the DMA allocation - * filter in order to select an apropriate TX channel. If this + * filter in order to select an appropriate TX channel. If this * is NULL the driver will attempt to use the RX channel as a * bidirectional channel */ diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index 475f8c42c0e..381f4cec826 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -443,6 +443,7 @@ void atm_dev_signal_change(struct atm_dev *dev, char signal); void vcc_insert_socket(struct sock *sk); +void atm_dev_release_vccs(struct atm_dev *dev); /* * This is approximately the algorithm used by alloc_skb. diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 16a902f099a..32176cc8e71 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1206,6 +1206,7 @@ struct blk_integrity { struct kobject kobj; }; +extern bool blk_integrity_is_initialized(struct gendisk *); extern int blk_integrity_register(struct gendisk *, struct blk_integrity *); extern void blk_integrity_unregister(struct gendisk *); extern int blk_integrity_compare(struct gendisk *, struct gendisk *); @@ -1262,6 +1263,7 @@ queue_max_integrity_segments(struct request_queue *q) #define queue_max_integrity_segments(a) (0) #define blk_integrity_merge_rq(a, b, c) (0) #define blk_integrity_merge_bio(a, b, c) (0) +#define blk_integrity_is_initialized(a) (0) #endif /* CONFIG_BLK_DEV_INTEGRITY */ diff --git a/include/linux/can/error.h b/include/linux/can/error.h index d4127fd9e68..5958074302a 100644 --- a/include/linux/can/error.h +++ b/include/linux/can/error.h @@ -51,7 +51,7 @@ #define CAN_ERR_PROT_BIT1 0x10 /* unable to send recessive bit */ #define CAN_ERR_PROT_OVERLOAD 0x20 /* bus overload */ #define CAN_ERR_PROT_ACTIVE 0x40 /* active error announcement */ -#define CAN_ERR_PROT_TX 0x80 /* error occured on transmission */ +#define CAN_ERR_PROT_TX 0x80 /* error occurred on transmission */ /* error in CAN protocol (location) / data[3] */ #define CAN_ERR_PROT_LOC_UNSPEC 0x00 /* unspecified */ diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h index 3250de935e1..34542d374dd 100644 --- a/include/linux/can/netlink.h +++ b/include/linux/can/netlink.h @@ -17,7 +17,7 @@ /* * CAN bit-timing parameters * - * For futher information, please read chapter "8 BIT TIMING + * For further information, please read chapter "8 BIT TIMING * REQUIREMENTS" of the "Bosch CAN Specification version 2.0" * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf. */ diff --git a/include/linux/can/platform/mcp251x.h b/include/linux/can/platform/mcp251x.h index 8e20540043f..089fe43211a 100644 --- a/include/linux/can/platform/mcp251x.h +++ b/include/linux/can/platform/mcp251x.h @@ -12,6 +12,7 @@ /** * struct mcp251x_platform_data - MCP251X SPI CAN controller platform data * @oscillator_frequency: - oscillator frequency in Hz + * @irq_flags: - IRQF configuration flags * @board_specific_setup: - called before probing the chip (power,reset) * @transceiver_enable: - called to power on/off the transceiver * @power_enable: - called to power on/off the mcp *and* the @@ -24,6 +25,7 @@ struct mcp251x_platform_data { unsigned long oscillator_frequency; + unsigned long irq_flags; int (*board_specific_setup)(struct spi_device *spi); int (*transceiver_enable)(int enable); int (*power_enable) (int enable); diff --git a/include/linux/cdk.h b/include/linux/cdk.h index 0908daf7bf5..80093a8d4f6 100644 --- a/include/linux/cdk.h +++ b/include/linux/cdk.h @@ -149,7 +149,7 @@ typedef struct cdkhdr { /* * Define the memory mapping structure. This structure is pointed to by * the memp field in the stlcdkhdr struct. As many as these structures - * as required are layed out in shared memory to define how the rest of + * as required are laid out in shared memory to define how the rest of * shared memory is divided up. There will be one for each port. */ typedef struct cdkmem { diff --git a/include/linux/ceph/auth.h b/include/linux/ceph/auth.h index 7fff521d7eb..aa13392a7ef 100644 --- a/include/linux/ceph/auth.h +++ b/include/linux/ceph/auth.h @@ -67,12 +67,12 @@ struct ceph_auth_client { bool negotiating; /* true if negotiating protocol */ const char *name; /* entity name */ u64 global_id; /* our unique id in system */ - const char *secret; /* our secret key */ + const struct ceph_crypto_key *key; /* our secret key */ unsigned want_keys; /* which services we want */ }; extern struct ceph_auth_client *ceph_auth_init(const char *name, - const char *secret); + const struct ceph_crypto_key *key); extern void ceph_auth_destroy(struct ceph_auth_client *ac); extern void ceph_auth_reset(struct ceph_auth_client *ac); diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h index 0d2e0fffb47..6365f041745 100644 --- a/include/linux/ceph/libceph.h +++ b/include/linux/ceph/libceph.h @@ -61,7 +61,7 @@ struct ceph_options { pointer type of args */ int num_mon; char *name; - char *secret; + struct ceph_crypto_key *key; }; /* diff --git a/include/linux/cfag12864b.h b/include/linux/cfag12864b.h index 6f9f19d6659..b454dfce60d 100644 --- a/include/linux/cfag12864b.h +++ b/include/linux/cfag12864b.h @@ -44,7 +44,7 @@ extern unsigned char * cfag12864b_buffer; /* * Get the refresh rate of the LCD * - * Returns the refresh rate (hertzs). + * Returns the refresh rate (hertz). */ extern unsigned int cfag12864b_getrate(void); diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index e654fa23991..5ac7ebc36db 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -240,7 +240,7 @@ struct cgroup { /* For RCU-protected deletion */ struct rcu_head rcu_head; - /* List of events which userspace want to recieve */ + /* List of events which userspace want to receive */ struct list_head event_list; spinlock_t event_list_lock; }; diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h index 72bfefdbd76..3c4aac40617 100644 --- a/include/linux/cm4000_cs.h +++ b/include/linux/cm4000_cs.h @@ -20,7 +20,7 @@ typedef struct atreq { } atreq_t; -/* what is particularly stupid in the original driver is the arch-dependant +/* what is particularly stupid in the original driver is the arch-dependent * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace * will lay out the structure members differently than the 64bit kernel. * diff --git a/include/linux/configfs.h b/include/linux/configfs.h index ddb7a97c78c..645778ad899 100644 --- a/include/linux/configfs.h +++ b/include/linux/configfs.h @@ -218,7 +218,7 @@ static ssize_t _item##_attr_store(struct config_item *item, \ * group children. default_groups may coexist alongsize make_group() or * make_item(), but if the group wishes to have only default_groups * children (disallowing mkdir(2)), it need not provide either function. - * If the group has commit(), it supports pending and commited (active) + * If the group has commit(), it supports pending and committed (active) * items. */ struct configfs_item_operations { diff --git a/include/linux/connector.h b/include/linux/connector.h index bcafc942e5e..7c60d0942ad 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -88,8 +88,6 @@ struct cn_queue_dev { atomic_t refcnt; unsigned char name[CN_CBQ_NAMELEN]; - struct workqueue_struct *cn_queue; - struct list_head queue_list; spinlock_t queue_lock; @@ -101,20 +99,13 @@ struct cn_callback_id { struct cb_id id; }; -struct cn_callback_data { - struct sk_buff *skb; - void (*callback) (struct cn_msg *, struct netlink_skb_parms *); - - void *free; -}; - struct cn_callback_entry { struct list_head callback_entry; - struct work_struct work; + atomic_t refcnt; struct cn_queue_dev *pdev; struct cn_callback_id id; - struct cn_callback_data data; + void (*callback) (struct cn_msg *, struct netlink_skb_parms *); u32 seq, group; }; @@ -138,13 +129,12 @@ int cn_queue_add_callback(struct cn_queue_dev *dev, const char *name, struct cb_id *id, void (*callback)(struct cn_msg *, struct netlink_skb_parms *)); void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id); +void cn_queue_release_callback(struct cn_callback_entry *); struct cn_queue_dev *cn_queue_alloc_dev(const char *name, struct sock *); void cn_queue_free_dev(struct cn_queue_dev *dev); int cn_cb_equal(struct cb_id *, struct cb_id *); -void cn_queue_wrapper(struct work_struct *work); - #endif /* __KERNEL__ */ #endif /* __CONNECTOR_H */ diff --git a/include/linux/cper.h b/include/linux/cper.h index 372a25839fd..c2304949653 100644 --- a/include/linux/cper.h +++ b/include/linux/cper.h @@ -310,7 +310,7 @@ struct cper_sec_proc_ia { __u8 cpuid[48]; }; -/* IA32/X64 Processor Error Infomation Structure */ +/* IA32/X64 Processor Error Information Structure */ struct cper_ia_err_info { uuid_le err_type; __u64 validation_bits; diff --git a/include/linux/decompress/mm.h b/include/linux/decompress/mm.h index 4cb72b920c7..7925bf0ee83 100644 --- a/include/linux/decompress/mm.h +++ b/include/linux/decompress/mm.h @@ -16,7 +16,7 @@ /* * Some architectures want to ensure there is no local data in their - * pre-boot environment, so that data can arbitarily relocated (via + * pre-boot environment, so that data can arbitrarily relocated (via * GOT references). This is achieved by defining STATIC_RW_DATA to * be null. */ diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 9bebd7f16ef..eee7addec28 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -434,7 +434,7 @@ struct dma_tx_state { * zero or error code * @device_tx_status: poll for transaction completion, the optional * txstate parameter can be supplied with a pointer to get a - * struct with auxilary transfer status information, otherwise the call + * struct with auxiliary transfer status information, otherwise the call * will just return a simple status code * @device_issue_pending: push pending transactions to hardware */ diff --git a/include/linux/drbd.h b/include/linux/drbd.h index d18d673ebc7..cec467f5d67 100644 --- a/include/linux/drbd.h +++ b/include/linux/drbd.h @@ -36,7 +36,7 @@ #include <sys/wait.h> #include <limits.h> -/* Altough the Linux source code makes a difference between +/* Although the Linux source code makes a difference between generic endianness and the bitfields' endianness, there is no architecture as of Linux-2.6.24-rc4 where the bitfileds' endianness does not match the generic endianness. */ @@ -184,7 +184,7 @@ enum drbd_conns { /* These temporal states are all used on the way * from >= C_CONNECTED to Unconnected. * The 'disconnect reason' states - * I do not allow to change beween them. */ + * I do not allow to change between them. */ C_TIMEOUT, C_BROKEN_PIPE, C_NETWORK_FAILURE, diff --git a/include/linux/drbd_limits.h b/include/linux/drbd_limits.h index bb264a5732d..246f576c981 100644 --- a/include/linux/drbd_limits.h +++ b/include/linux/drbd_limits.h @@ -43,7 +43,7 @@ /* net { */ /* timeout, unit centi seconds - * more than one minute timeout is not usefull */ + * more than one minute timeout is not useful */ #define DRBD_TIMEOUT_MIN 1 #define DRBD_TIMEOUT_MAX 600 #define DRBD_TIMEOUT_DEF 60 /* 6 seconds */ @@ -68,7 +68,7 @@ #define DRBD_MAX_EPOCH_SIZE_MAX 20000 #define DRBD_MAX_EPOCH_SIZE_DEF 2048 - /* I don't think that a tcp send buffer of more than 10M is usefull */ + /* I don't think that a tcp send buffer of more than 10M is useful */ #define DRBD_SNDBUF_SIZE_MIN 0 #define DRBD_SNDBUF_SIZE_MAX (10<<20) #define DRBD_SNDBUF_SIZE_DEF 0 @@ -101,7 +101,7 @@ #define DRBD_RATE_MAX (4 << 20) #define DRBD_RATE_DEF 250 /* kb/second */ - /* less than 7 would hit performance unneccessarily. + /* less than 7 would hit performance unnecessarily. * 3833 is the largest prime that still does fit * into 64 sectors of activity log */ #define DRBD_AL_EXTENTS_MIN 7 diff --git a/include/linux/elevator.h b/include/linux/elevator.h index d93efcc4457..21a8ebf2dc3 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -101,7 +101,6 @@ extern void elv_dispatch_sort(struct request_queue *, struct request *); extern void elv_dispatch_add_tail(struct request_queue *, struct request *); extern void elv_add_request(struct request_queue *, struct request *, int); extern void __elv_add_request(struct request_queue *, struct request *, int); -extern void elv_insert(struct request_queue *, struct request *, int); extern int elv_merge(struct request_queue *, struct request **, struct bio *); extern int elv_try_merge(struct request *, struct bio *); extern void elv_merge_requests(struct request_queue *, struct request *, diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index c8fcbdd2b0e..dc80d829424 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -614,7 +614,7 @@ struct ethtool_sfeatures { * values of corresponding bits in features[].requested. Bits in .requested * not set in .valid or not changeable are ignored. * - * Returns %EINVAL when .valid contains undefined or never-changable bits + * Returns %EINVAL when .valid contains undefined or never-changeable bits * or size is not equal to required number of features words (32-bit blocks). * Returns >= 0 if request was completed; bits set in the value mean: * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h index f6856a5a1d4..f362733186a 100644 --- a/include/linux/eventpoll.h +++ b/include/linux/eventpoll.h @@ -1,5 +1,5 @@ /* - * include/linux/eventpoll.h ( Efficent event polling implementation ) + * include/linux/eventpoll.h ( Efficient event polling implementation ) * Copyright (C) 2001,...,2006 Davide Libenzi * * This program is free software; you can redistribute it and/or modify diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h index 33a42f24b27..3a4cef5322d 100644 --- a/include/linux/exportfs.h +++ b/include/linux/exportfs.h @@ -120,7 +120,7 @@ struct fid { * encode_fh: * @encode_fh should store in the file handle fragment @fh (using at most * @max_len bytes) information that can be used by @decode_fh to recover the - * file refered to by the &struct dentry @de. If the @connectable flag is + * file referred to by the &struct dentry @de. If the @connectable flag is * set, the encode_fh() should store sufficient information so that a good * attempt can be made to find not only the file but also it's place in the * filesystem. This typically means storing a reference to de->d_parent in diff --git a/include/linux/fb.h b/include/linux/fb.h index b2a36391d2a..df728c1c29e 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -534,14 +534,14 @@ struct fb_cursor_user { #define FB_EVENT_GET_CONSOLE_MAP 0x07 /* CONSOLE-SPECIFIC: set console to framebuffer mapping */ #define FB_EVENT_SET_CONSOLE_MAP 0x08 -/* A hardware display blank change occured */ +/* A hardware display blank change occurred */ #define FB_EVENT_BLANK 0x09 /* Private modelist is to be replaced */ #define FB_EVENT_NEW_MODELIST 0x0A /* The resolution of the passed in fb_info about to change and all vc's should be changed */ #define FB_EVENT_MODE_CHANGE_ALL 0x0B -/* A software display blank change occured */ +/* A software display blank change occurred */ #define FB_EVENT_CONBLANK 0x0C /* Get drawing requirements */ #define FB_EVENT_GET_REQ 0x0D @@ -805,7 +805,7 @@ struct fb_tile_ops { /* A driver may set this flag to indicate that it does want a set_par to be * called every time when fbcon_switch is executed. The advantage is that with * this flag set you can really be sure that set_par is always called before - * any of the functions dependant on the correct hardware state or altering + * any of the functions dependent on the correct hardware state or altering * that state, even if you are using some broken X releases. The disadvantage * is that it introduces unwanted delays to every console switch if set_par * is slow. It is a good idea to try this flag in the drivers initialization @@ -877,7 +877,7 @@ struct fb_info { void *fbcon_par; /* fbcon use-only private area */ /* From here on everything is device dependent */ void *par; - /* we need the PCI or similiar aperture base/size not + /* we need the PCI or similar aperture base/size not smem_start/size as smem_start may just be an object allocated inside the aperture so may not actually overlap */ struct apertures_struct { diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h index 59ea406be7f..4ff09889c5c 100644 --- a/include/linux/firewire-cdev.h +++ b/include/linux/firewire-cdev.h @@ -900,7 +900,7 @@ struct fw_cdev_get_cycle_timer2 { /** * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth - * @closure: Passed back to userspace in correponding iso resource events + * @closure: Passed back to userspace in corresponding iso resource events * @channels: Isochronous channels of which one is to be (de)allocated * @bandwidth: Isochronous bandwidth units to be (de)allocated * @handle: Handle to the allocation, written by the kernel (only valid in diff --git a/include/linux/fs.h b/include/linux/fs.h index 52f283c1edb..dbd860af080 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -465,7 +465,7 @@ struct iattr { struct timespec ia_ctime; /* - * Not an attribute, but an auxilary info for filesystems wanting to + * Not an attribute, but an auxiliary info for filesystems wanting to * implement an ftruncate() like method. NOTE: filesystem should * check for (ia_valid & ATTR_FILE), and not for (ia_file != NULL). */ @@ -613,6 +613,8 @@ struct address_space_operations { int (*error_remove_page)(struct address_space *, struct page *); }; +extern const struct address_space_operations empty_aops; + /* * pagecache_write_begin/pagecache_write_end must be used by general code * to write into the pagecache. @@ -647,7 +649,7 @@ struct address_space { } __attribute__((aligned(sizeof(long)))); /* * On most architectures that alignment is already the case; but - * must be enforced here for CRIS, to let the least signficant bit + * must be enforced here for CRIS, to let the least significant bit * of struct page's "mapping" pointer be used for PAGE_MAPPING_ANON. */ diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index b8581c09d19..76427e688d1 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -236,7 +236,7 @@ struct fscache_cache_ops { /* unpin an object in the cache */ void (*unpin_object)(struct fscache_object *object); - /* store the updated auxilliary data on an object */ + /* store the updated auxiliary data on an object */ void (*update_object)(struct fscache_object *object); /* discard the resources pinned by an object and effect retirement if diff --git a/include/linux/fscache.h b/include/linux/fscache.h index ec0dad5ab90..7c4d72f5581 100644 --- a/include/linux/fscache.h +++ b/include/linux/fscache.h @@ -102,9 +102,9 @@ struct fscache_cookie_def { */ void (*get_attr)(const void *cookie_netfs_data, uint64_t *size); - /* get the auxilliary data from netfs data + /* get the auxiliary data from netfs data * - this function can be absent if the index carries no state data - * - should store the auxilliary data in the buffer + * - should store the auxiliary data in the buffer * - should return the amount of amount stored * - not permitted to return an error * - the netfs data from the cookie being used as the source is @@ -117,7 +117,7 @@ struct fscache_cookie_def { /* consult the netfs about the state of an object * - this function can be absent if the index carries no state data * - the netfs data from the cookie being used as the target is - * presented, as is the auxilliary data + * presented, as is the auxiliary data */ enum fscache_checkaux (*check_aux)(void *cookie_netfs_data, const void *data, diff --git a/include/linux/hid.h b/include/linux/hid.h index bb29bb1dbd2..42f7e2fb501 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -799,7 +799,7 @@ static inline int __must_check hid_parse(struct hid_device *hdev) * * Call this in probe function *after* hid_parse. This will setup HW buffers * and start the device (if not deffered to device open). hid_hw_stop must be - * called if this was successfull. + * called if this was successful. */ static inline int __must_check hid_hw_start(struct hid_device *hdev, unsigned int connect_mask) diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h index 9db3d454887..d392975d888 100644 --- a/include/linux/hp_sdc.h +++ b/include/linux/hp_sdc.h @@ -101,7 +101,7 @@ int hp_sdc_dequeue_transaction(hp_sdc_transaction *this); #define HP_SDC_STATUS_REG 0x40 /* Data from an i8042 register */ #define HP_SDC_STATUS_HILCMD 0x50 /* Command from HIL MLC */ #define HP_SDC_STATUS_HILDATA 0x60 /* Data from HIL MLC */ -#define HP_SDC_STATUS_PUP 0x70 /* Sucessful power-up self test */ +#define HP_SDC_STATUS_PUP 0x70 /* Successful power-up self test */ #define HP_SDC_STATUS_KCOOKED 0x80 /* Key from cooked kbd */ #define HP_SDC_STATUS_KRPG 0xc0 /* Key from Repeat Gen */ #define HP_SDC_STATUS_KMOD_SUP 0x10 /* Shift key is up */ diff --git a/include/linux/i2o.h b/include/linux/i2o.h index 9e7a12d6385..a6deef4f4f6 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -826,7 +826,7 @@ static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct * @c: I2O controller * * This function tries to get a message frame. If no message frame is - * available do not wait until one is availabe (see also i2o_msg_get_wait). + * available do not wait until one is available (see also i2o_msg_get_wait). * The returned pointer to the message frame is not in I/O memory, it is * allocated from a mempool. But because a MFA is allocated from the * controller too it is guaranteed that i2o_msg_post() will never fail. diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 59b72ca1c5d..bea0ac75071 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -98,7 +98,7 @@ typedef irqreturn_t (*irq_handler_t)(int, void *); * @next: pointer to the next irqaction for shared interrupts * @irq: interrupt number * @dir: pointer to the proc/irq/NN/name entry - * @thread_fn: interupt handler function for threaded interrupts + * @thread_fn: interrupt handler function for threaded interrupts * @thread: thread pointer for threaded interrupts * @thread_flags: flags related to @thread * @thread_mask: bitmask for keeping track of @thread activity @@ -338,14 +338,6 @@ static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long /* IRQ wakeup (PM) control: */ extern int irq_set_irq_wake(unsigned int irq, unsigned int on); -#ifndef CONFIG_GENERIC_HARDIRQS_NO_COMPAT -/* Please do not use: Use the replacement functions instead */ -static inline int set_irq_wake(unsigned int irq, unsigned int on) -{ - return irq_set_irq_wake(irq, on); -} -#endif - static inline int enable_irq_wake(unsigned int irq) { return irq_set_irq_wake(irq, 1); @@ -492,7 +484,7 @@ extern void __send_remote_softirq(struct call_single_data *cp, int cpu, Properties: * If tasklet_schedule() is called, then tasklet is guaranteed to be executed on some cpu at least once after this. - * If the tasklet is already scheduled, but its excecution is still not + * If the tasklet is already scheduled, but its execution is still not started, it will be executed only once. * If this tasklet is already running on another CPU (or schedule is called from tasklet itself), it is rescheduled for later. diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index 045f2f275cd..ca85cf894e3 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -111,7 +111,7 @@ struct ipmi_ipmb_addr { * A LAN Address. This is an address to/from a LAN interface bridged * by the BMC, not an address actually out on the LAN. * - * A concious decision was made here to deviate slightly from the IPMI + * A conscious decision was made here to deviate slightly from the IPMI * spec. We do not use rqSWID and rsSWID like it shows in the * message. Instead, we use remote_SWID and local_SWID. This means * that any message (a request or response) from another device will @@ -259,7 +259,7 @@ struct ipmi_recv_msg { void (*done)(struct ipmi_recv_msg *msg); /* Place-holder for the data, don't make any assumptions about - the size or existance of this, since it may change. */ + the size or existence of this, since it may change. */ unsigned char msg_data[IPMI_MAX_MSG_LENGTH]; }; diff --git a/include/linux/irq.h b/include/linux/irq.h index 2a375a72ce3..09a308072f5 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -64,13 +64,6 @@ typedef void (*irq_preflow_handler_t)(struct irq_data *data); * IRQ_NO_BALANCING - Interrupt cannot be balanced (affinity set) * IRQ_MOVE_PCNTXT - Interrupt can be migrated from process context * IRQ_NESTED_TRHEAD - Interrupt nests into another thread - * - * Deprecated bits. They are kept updated as long as - * CONFIG_GENERIC_HARDIRQS_NO_COMPAT is not set. Will go away soon. These bits - * are internal state of the core code and if you really need to acces - * them then talk to the genirq maintainer instead of hacking - * something weird. - * */ enum { IRQ_TYPE_NONE = 0x00000000, diff --git a/include/linux/isdn/hdlc.h b/include/linux/isdn/hdlc.h index 4b3ecc40889..96521370c78 100644 --- a/include/linux/isdn/hdlc.h +++ b/include/linux/isdn/hdlc.h @@ -2,7 +2,7 @@ * hdlc.h -- General purpose ISDN HDLC decoder. * * Implementation of a HDLC decoder/encoder in software. - * Neccessary because some ISDN devices don't have HDLC + * Necessary because some ISDN devices don't have HDLC * controllers. * * Copyright (C) diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h index 88b45895746..94ab5e942e5 100644 --- a/include/linux/ixjuser.h +++ b/include/linux/ixjuser.h @@ -50,7 +50,7 @@ * IOCTL's used for the Quicknet Telephony Cards * * If you use the IXJCTL_TESTRAM command, the card must be power cycled to -* reset the SRAM values before futher use. +* reset the SRAM values before further use. * ******************************************************************************/ diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index 922aa313c9f..f97672a36fa 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -42,7 +42,7 @@ /* LATCH is used in the interval timer and ftape setup. */ #define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */ -/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, then we can +/* Suppose we want to divide two numbers NOM and DEN: NOM/DEN, then we can * improve accuracy by shifting LSH bits, hence calculating: * (NOM << LSH) / DEN * This however means trouble for large NOM, because (NOM << LSH) may no diff --git a/include/linux/kexec.h b/include/linux/kexec.h index 03e8e8dbc57..c2478a342cd 100644 --- a/include/linux/kexec.h +++ b/include/linux/kexec.h @@ -208,6 +208,7 @@ int __init parse_crashkernel(char *cmdline, unsigned long long system_ram, unsigned long long *crash_size, unsigned long long *crash_base); int crash_shrink_memory(unsigned long new_size); size_t crash_get_memory_size(void); +void crash_free_reserved_phys_range(unsigned long begin, unsigned long end); #else /* !CONFIG_KEXEC */ struct pt_regs; diff --git a/include/linux/ktime.h b/include/linux/ktime.h index e1ceaa9b36b..603bec2913b 100644 --- a/include/linux/ktime.h +++ b/include/linux/ktime.h @@ -35,7 +35,7 @@ * * On 32-bit CPUs an optimized representation of the timespec structure * is used to avoid expensive conversions from and to timespecs. The - * endian-aware order of the tv struct members is choosen to allow + * endian-aware order of the tv struct members is chosen to allow * mathematical operations on the tv64 member of the union too, which * for certain operations produces better code. * @@ -158,7 +158,7 @@ static inline ktime_t ktime_set(const long secs, const unsigned long nsecs) * @lhs: minuend * @rhs: subtrahend * - * Returns the remainder of the substraction + * Returns the remainder of the subtraction */ static inline ktime_t ktime_sub(const ktime_t lhs, const ktime_t rhs) { diff --git a/include/linux/led-lm3530.h b/include/linux/led-lm3530.h index bb69d20da0d..58592fa67d2 100644 --- a/include/linux/led-lm3530.h +++ b/include/linux/led-lm3530.h @@ -41,7 +41,7 @@ #define LM3530_RAMP_TIME_8s (7) /* ALS Resistor Select */ -#define LM3530_ALS_IMPD_Z (0x00) /* ALS Impedence */ +#define LM3530_ALS_IMPD_Z (0x00) /* ALS Impedance */ #define LM3530_ALS_IMPD_13_53kOhm (0x01) #define LM3530_ALS_IMPD_9_01kOhm (0x02) #define LM3530_ALS_IMPD_5_41kOhm (0x03) diff --git a/include/linux/libata.h b/include/linux/libata.h index c71f46960f3..7f675aa81d8 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -364,7 +364,7 @@ enum { ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6, /* Horkage types. May be set by libata or controller on drives - (some horkage may be drive/controller pair dependant */ + (some horkage may be drive/controller pair dependent */ ATA_HORKAGE_DIAGNOSTIC = (1 << 0), /* Failed boot diag */ ATA_HORKAGE_NODMA = (1 << 1), /* DMA problems */ diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h index 78fbf24f357..6a4fab7c6e0 100644 --- a/include/linux/lru_cache.h +++ b/include/linux/lru_cache.h @@ -148,7 +148,7 @@ write intent log information, three of which are mentioned here. * * DRBD currently (May 2009) only uses 61 elements on the resync lru_cache * (total memory usage 2 pages), and up to 3833 elements on the act_log - * lru_cache, totalling ~215 kB for 64bit architechture, ~53 pages. + * lru_cache, totalling ~215 kB for 64bit architecture, ~53 pages. * * We usually do not actually free these objects again, but only "recycle" * them, as the change "index: -old_label, +LC_FREE" would need a transaction diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h index e786fe9841e..579b50ca2e0 100644 --- a/include/linux/mfd/wm8350/pmic.h +++ b/include/linux/mfd/wm8350/pmic.h @@ -1,5 +1,5 @@ /* - * pmic.h -- Power Managment Driver for Wolfson WM8350 PMIC + * pmic.h -- Power Management Driver for Wolfson WM8350 PMIC * * Copyright 2007 Wolfson Microelectronics PLC * diff --git a/include/linux/mm.h b/include/linux/mm.h index 7606d7db96c..692dbae6ffa 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -608,7 +608,7 @@ static inline pte_t maybe_mkwrite(pte_t pte, struct vm_area_struct *vma) #endif /* - * Define the bit shifts to access each section. For non-existant + * Define the bit shifts to access each section. For non-existent * sections we define the shift as 0; that plus a 0 mask ensures * the compiler will optimise away reference to them. */ diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index c0207a77047..bdd7ceeb99e 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -98,7 +98,7 @@ struct mmc_data; * EVENT_DATA_COMPLETE is set in @pending_events, all data-related * interrupts must be disabled and @data_status updated with a * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the - * CMDRDY interupt must be disabled and @cmd_status updated with a + * CMDRDY interrupt must be disabled and @cmd_status updated with a * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the * bytes_xfered field of @data must be written. This is ensured by * using barriers. @@ -172,7 +172,7 @@ struct dw_mci_dma_ops { #define DW_MCI_QUIRK_IDMAC_DTO BIT(0) /* delay needed between retries on some 2.11a implementations */ #define DW_MCI_QUIRK_RETRY_DELAY BIT(1) -/* High Speed Capable - Supports HS cards (upto 50MHz) */ +/* High Speed Capable - Supports HS cards (up to 50MHz) */ #define DW_MCI_QUIRK_HIGHSPEED BIT(2) /* Unreliable card detection */ #define DW_MCI_QUIRK_BROKEN_CARD_DETECTION BIT(3) diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h index 9d2deb200f5..a3759cb0ac1 100644 --- a/include/linux/mroute6.h +++ b/include/linux/mroute6.h @@ -249,7 +249,7 @@ static inline int ip6mr_sk_done(struct sock *sk) * Structure used to communicate from kernel to multicast router. * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{} * used for IPv4 implementation). This is because this structure will be passed via an - * IPv6 raw socket, on wich an application will only receiver the payload i.e the data after + * IPv6 raw socket, on which an application will only receiver the payload i.e the data after * the IPv6 header and all the extension headers. (See section 3 of RFC 3542) */ diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index 0d823f2dd66..d2492549297 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -308,7 +308,7 @@ static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, addr = (cmd_ofs * type) * interleave; - /* Modify the unlock address if we are in compatiblity mode. + /* Modify the unlock address if we are in compatibility mode. * For 16bit devices on 8 bit busses * and 32bit devices on 16 bit busses * set the low bit of the alternating bit sequence of the address. diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index ae67ef56a8f..d44192740f6 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -416,9 +416,9 @@ struct nand_buffers { * @select_chip: [REPLACEABLE] select chip nr * @block_bad: [REPLACEABLE] check, if the block is bad * @block_markbad: [REPLACEABLE] mark the block bad - * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific funtion for controlling + * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific function for controlling * ALE/CLE/nCE. Also used to write command and address - * @init_size: [BOARDSPECIFIC] hardwarespecific funtion for setting + * @init_size: [BOARDSPECIFIC] hardwarespecific function for setting * mtd->oobsize, mtd->writesize and so on. * @id_data contains the 8 bytes values of NAND_CMD_READID. * Return with the bus width. @@ -437,7 +437,7 @@ struct nand_buffers { * @erase_cmd: [INTERN] erase command write function, selectable due * to AND support. * @scan_bbt: [REPLACEABLE] function to scan bad block table - * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering + * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring * data from array to read regs (tR). * @state: [INTERN] the current state of the NAND device * @oob_poi: poison value buffer diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h index 36efcba15ec..abed4dec5c2 100644 --- a/include/linux/mtd/xip.h +++ b/include/linux/mtd/xip.h @@ -51,7 +51,7 @@ * return in usecs the elapsed timebetween now and the reference x as * returned by xip_currtime(). * - * note 1: convertion to usec can be approximated, as long as the + * note 1: conversion to usec can be approximated, as long as the * returned value is <= the real elapsed time. * note 2: this should be able to cope with a few seconds without * overflowing. diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 5eeb2cd3631..0249fe7e387 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2598,8 +2598,8 @@ static inline int dev_ethtool_get_settings(struct net_device *dev, static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev) { - if (dev->hw_features & NETIF_F_RXCSUM) - return !!(dev->features & NETIF_F_RXCSUM); + if (dev->features & NETIF_F_RXCSUM) + return 1; if (!dev->ethtool_ops || !dev->ethtool_ops->get_rx_csum) return 0; return dev->ethtool_ops->get_rx_csum(dev); diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index eeec00abb66..7fa95df6014 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -270,7 +270,8 @@ struct nf_afinfo { unsigned int dataoff, unsigned int len, u_int8_t protocol); - int (*route)(struct dst_entry **dst, struct flowi *fl); + int (*route)(struct net *net, struct dst_entry **dst, + struct flowi *fl, bool strict); void (*saveroute)(const struct sk_buff *skb, struct nf_queue_entry *entry); int (*reroute)(struct sk_buff *skb, diff --git a/include/linux/netfilter/ipset/ip_set.h b/include/linux/netfilter/ipset/ip_set.h index ec333d83f3b..5a262e3ae71 100644 --- a/include/linux/netfilter/ipset/ip_set.h +++ b/include/linux/netfilter/ipset/ip_set.h @@ -293,7 +293,7 @@ struct ip_set { /* Lock protecting the set data */ rwlock_t lock; /* References to the set */ - atomic_t ref; + u32 ref; /* The core set type */ struct ip_set_type *type; /* The type variant doing the real job */ diff --git a/include/linux/netfilter/ipset/ip_set_ahash.h b/include/linux/netfilter/ipset/ip_set_ahash.h index ec9d9bea1e3..a0196ac7905 100644 --- a/include/linux/netfilter/ipset/ip_set_ahash.h +++ b/include/linux/netfilter/ipset/ip_set_ahash.h @@ -515,8 +515,7 @@ type_pf_head(struct ip_set *set, struct sk_buff *skb) if (h->netmask != HOST_MASK) NLA_PUT_U8(skb, IPSET_ATTR_NETMASK, h->netmask); #endif - NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES, - htonl(atomic_read(&set->ref) - 1)); + NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES, htonl(set->ref - 1)); NLA_PUT_NET32(skb, IPSET_ATTR_MEMSIZE, htonl(memsize)); if (with_timeout(h->timeout)) NLA_PUT_NET32(skb, IPSET_ATTR_TIMEOUT, htonl(h->timeout)); diff --git a/include/linux/netfilter/nf_conntrack_proto_gre.h b/include/linux/netfilter/nf_conntrack_proto_gre.h index 2a10efda17f..6a0664c0c45 100644 --- a/include/linux/netfilter/nf_conntrack_proto_gre.h +++ b/include/linux/netfilter/nf_conntrack_proto_gre.h @@ -60,7 +60,7 @@ struct gre_hdr_pptp { __be16 payload_len; /* size of ppp payload, not inc. gre header */ __be16 call_id; /* peer's call_id for this session */ __be32 seq; /* sequence number. Present if S==1 */ - __be32 ack; /* seq number of highest packet recieved by */ + __be32 ack; /* seq number of highest packet received by */ /* sender in this session */ }; diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h index 1c6f0c5f530..8797ed16feb 100644 --- a/include/linux/netfilter_bridge/ebtables.h +++ b/include/linux/netfilter_bridge/ebtables.h @@ -92,7 +92,7 @@ struct ebt_entries { /* This is a hack to make a difference between an ebt_entry struct and an * ebt_entries struct when traversing the entries from start to end. - * Using this simplifies the code alot, while still being able to use + * Using this simplifies the code a lot, while still being able to use * ebt_entries. * Contrary, iptables doesn't use something like ebt_entries and therefore uses * different techniques for naming the policy and such. So, iptables doesn't diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index b528f6d4b86..178fafe0ff9 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -359,7 +359,7 @@ enum nfsstat4 { /* Error 10073 is unused. */ NFS4ERR_CLIENTID_BUSY = 10074, /* clientid has state */ NFS4ERR_PNFS_IO_HOLE = 10075, /* IO to _SPARSE file hole */ - NFS4ERR_SEQ_FALSE_RETRY = 10076, /* retry not origional */ + NFS4ERR_SEQ_FALSE_RETRY = 10076, /* retry not original */ NFS4ERR_BAD_HIGH_SLOT = 10077, /* sequence arg bad */ NFS4ERR_DEADSESSION = 10078, /* persistent session dead */ NFS4ERR_ENCR_ALG_UNSUPP = 10079, /* SSV alg mismatch */ diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h index bd316159278..84058ec6939 100644 --- a/include/linux/nfsd/export.h +++ b/include/linux/nfsd/export.h @@ -80,7 +80,7 @@ struct nfsd4_fs_locations { /* * We keep an array of pseudoflavors with the export, in order from most - * to least preferred. For the forseeable future, we don't expect more + * to least preferred. For the foreseeable future, we don't expect more * than the eight pseudoflavors null, unix, krb5, krb5i, krb5p, skpm3, * spkm3i, and spkm3p (and using all 8 at once should be rare). */ diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h index 80d55bbc536..f76d80ccec1 100644 --- a/include/linux/nfsd/nfsfh.h +++ b/include/linux/nfsd/nfsfh.h @@ -49,7 +49,7 @@ struct nfs_fhbase_old { * * The auth_type field specifies how the filehandle can be authenticated * This might allow a file to be confirmed to be in a writable part of a - * filetree without checking the path from it upto the root. + * filetree without checking the path from it up to the root. * Current values: * 0 - No authentication. fb_auth is 0 bytes long * Possible future values: diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 30022189104..bbfa1093f60 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -414,7 +414,7 @@ * @__NL80211_CMD_AFTER_LAST: internal use */ enum nl80211_commands { -/* don't change the order or add anything inbetween, this is ABI! */ +/* don't change the order or add anything between, this is ABI! */ NL80211_CMD_UNSPEC, NL80211_CMD_GET_WIPHY, /* can dump */ @@ -860,7 +860,7 @@ enum nl80211_commands { * This can be used to mask out antennas which are not attached or should * not be used for receiving. If an antenna is not selected in this bitmap * the hardware should not be configured to receive on this antenna. - * For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX. + * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. * * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available * for configuration as TX antennas via the above parameters. @@ -891,7 +891,7 @@ enum nl80211_commands { * @__NL80211_ATTR_AFTER_LAST: internal use */ enum nl80211_attrs { -/* don't change the order or add anything inbetween, this is ABI! */ +/* don't change the order or add anything between, this is ABI! */ NL80211_ATTR_UNSPEC, NL80211_ATTR_WIPHY, @@ -1419,7 +1419,7 @@ enum nl80211_bitrate_attr { * 802.11 country information element with regulatory information it * thinks we should consider. cfg80211 only processes the country * code from the IE, and relies on the regulatory domain information - * structure pased by userspace (CRDA) from our wireless-regdb. + * structure passed by userspace (CRDA) from our wireless-regdb. * If a channel is enabled but the country code indicates it should * be disabled we disable the channel and re-enable it upon disassociation. */ @@ -1598,7 +1598,7 @@ enum nl80211_mntr_flags { * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in * millisecond units, used by the Peer Link Open message * - * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in + * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in * millisecond units, used by the peer link management to close a peer link * * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in diff --git a/include/linux/notifier.h b/include/linux/notifier.h index 2026f9e1ceb..621dfa16acc 100644 --- a/include/linux/notifier.h +++ b/include/linux/notifier.h @@ -237,7 +237,7 @@ static inline int notifier_to_errno(int ret) * enabling interrupts. Must not sleep, * must not fail */ -/* Used for CPU hotplug events occuring while tasks are frozen due to a suspend +/* Used for CPU hotplug events occurring while tasks are frozen due to a suspend * operation in progress */ #define CPU_TASKS_FROZEN 0x0010 diff --git a/include/linux/omap3isp.h b/include/linux/omap3isp.h index 150822b4dbf..b6111f8cd49 100644 --- a/include/linux/omap3isp.h +++ b/include/linux/omap3isp.h @@ -250,7 +250,7 @@ enum omap3isp_h3a_af_rgbpos { /* Contains the information regarding the Horizontal Median Filter */ struct omap3isp_h3a_af_hmf { __u8 enable; /* Status of Horizontal Median Filter */ - __u8 threshold; /* Threshhold Value for Horizontal Median Filter */ + __u8 threshold; /* Threshold Value for Horizontal Median Filter */ }; /* Contains the information regarding the IIR Filters */ diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h index f5de21de31d..961ecc7d30b 100644 --- a/include/linux/page_cgroup.h +++ b/include/linux/page_cgroup.h @@ -138,7 +138,7 @@ static inline void move_unlock_page_cgroup(struct page_cgroup *pc, #define PCG_ARRAYID_OFFSET (BITS_PER_LONG - PCG_ARRAYID_WIDTH) /* - * Zero the shift count for non-existant fields, to prevent compiler + * Zero the shift count for non-existent fields, to prevent compiler * warnings and ensure references are optimized away. */ #define PCG_ARRAYID_SHIFT (PCG_ARRAYID_OFFSET * (PCG_ARRAYID_WIDTH != 0)) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 11fd38151cc..4e2c9150a78 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -518,7 +518,7 @@ #define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303 #define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304 #define PCI_DEVICE_ID_AMD_15H_NB_F3 0x1603 -#define PCI_DEVICE_ID_AMD_15H_NB_LINK 0x1604 +#define PCI_DEVICE_ID_AMD_15H_NB_F4 0x1604 #define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703 #define PCI_DEVICE_ID_AMD_LANCE 0x2000 #define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001 diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 5b7e6b1ba54..be01380f798 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -223,7 +223,7 @@ #define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */ #define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */ #define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */ -#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxilliary power support mask */ +#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxiliary power support mask */ #define PCI_PM_CAP_D1 0x0200 /* D1 power state support */ #define PCI_PM_CAP_D2 0x0400 /* D2 power state support */ #define PCI_PM_CAP_PME 0x0800 /* PME pin supported */ @@ -435,7 +435,7 @@ #define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ #define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */ #define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock Power Management */ -#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Suprise Down Error Reporting Capable */ +#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down Error Reporting Capable */ #define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */ #define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */ #define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 311b4dc785a..ee9f1e78280 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -662,7 +662,7 @@ struct pmu { int (*commit_txn) (struct pmu *pmu); /* optional */ /* * Will cancel the transaction, assumes ->del() is called - * for each successfull ->add() during the transaction. + * for each successful ->add() during the transaction. */ void (*cancel_txn) (struct pmu *pmu); /* optional */ }; @@ -1086,7 +1086,7 @@ void perf_event_task_sched_out(struct task_struct *task, struct task_struct *nex { perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0); - COND_STMT(&perf_sched_events, __perf_event_task_sched_out(task, next)); + __perf_event_task_sched_out(task, next); } extern void perf_event_mmap(struct vm_area_struct *vma); diff --git a/include/linux/pid.h b/include/linux/pid.h index efceda0a51b..31afb7ecbe1 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -21,7 +21,7 @@ enum pid_type * quickly from the numeric pid value. The attached processes may be * quickly accessed by following pointers from struct pid. * - * Storing pid_t values in the kernel and refering to them later has a + * Storing pid_t values in the kernel and referring to them later has a * problem. The process originally with that pid may have exited and the * pid allocator wrapped, and another process could have come along * and been assigned that pid. diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h index b1032a3fafd..3a02e020857 100644 --- a/include/linux/pkt_sched.h +++ b/include/linux/pkt_sched.h @@ -223,7 +223,7 @@ struct tc_gred_qopt { __u32 limit; /* HARD maximal queue length (bytes) */ __u32 qth_min; /* Min average length threshold (bytes) */ __u32 qth_max; /* Max average length threshold (bytes) */ - __u32 DP; /* upto 2^32 DPs */ + __u32 DP; /* up to 2^32 DPs */ __u32 backlog; __u32 qave; __u32 forced; diff --git a/include/linux/poll.h b/include/linux/poll.h index 1a2ccd6f382..cf40010ce0c 100644 --- a/include/linux/poll.h +++ b/include/linux/poll.h @@ -82,7 +82,7 @@ static inline int poll_schedule(struct poll_wqueues *pwq, int state) } /* - * Scaleable version of the fd_set. + * Scalable version of the fd_set. */ typedef struct { diff --git a/include/linux/prefetch.h b/include/linux/prefetch.h index af7c36a5a52..a3bfbdf63d3 100644 --- a/include/linux/prefetch.h +++ b/include/linux/prefetch.h @@ -29,7 +29,7 @@ prefetchw(x) - prefetches the cacheline at "x" for write spin_lock_prefetch(x) - prefetches the spinlock *x for taking - there is also PREFETCH_STRIDE which is the architecure-prefered + there is also PREFETCH_STRIDE which is the architecure-preferred "lookahead" size for prefetching streamed operations. */ diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index 2f691e4e622..44835fb3979 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -122,7 +122,7 @@ #define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ #define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ #define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ -#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */ +#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interrupt Enable */ #define SSCR1_IFS (1 << 16) /* Invert Frame Signal */ #define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ #define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h index ffa2efbbe38..75cbf4f62fe 100644 --- a/include/linux/raid/md_p.h +++ b/include/linux/raid/md_p.h @@ -251,7 +251,7 @@ struct mdp_superblock_1 { __le64 utime; /* 40 bits second, 24 btes microseconds */ __le64 events; /* incremented when superblock updated */ __le64 resync_offset; /* data before this offset (from data_offset) known to be in sync */ - __le32 sb_csum; /* checksum upto devs[max_dev] */ + __le32 sb_csum; /* checksum up to devs[max_dev] */ __le32 max_dev; /* size of devs[] array to consider */ __u8 pad3[64-32]; /* set to 0 when writing */ diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index af561485628..ff422d2b7f9 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -339,6 +339,12 @@ extern int rcu_my_thread_group_empty(void); ((typeof(*p) __force __kernel *)(p)); \ }) +#define __rcu_access_index(p, space) \ + ({ \ + typeof(p) _________p1 = ACCESS_ONCE(p); \ + rcu_dereference_sparse(p, space); \ + (_________p1); \ + }) #define __rcu_dereference_index_check(p, c) \ ({ \ typeof(p) _________p1 = ACCESS_ONCE(p); \ @@ -429,6 +435,20 @@ extern int rcu_my_thread_group_empty(void); #define rcu_dereference_raw(p) rcu_dereference_check(p, 1) /*@@@ needed? @@@*/ /** + * rcu_access_index() - fetch RCU index with no dereferencing + * @p: The index to read + * + * Return the value of the specified RCU-protected index, but omit the + * smp_read_barrier_depends() and keep the ACCESS_ONCE(). This is useful + * when the value of this index is accessed, but the index is not + * dereferenced, for example, when testing an RCU-protected index against + * -1. Although rcu_access_index() may also be used in cases where + * update-side locks prevent the value of the index from changing, you + * should instead use rcu_dereference_index_protected() for this use case. + */ +#define rcu_access_index(p) __rcu_access_index((p), __rcu) + +/** * rcu_dereference_index_check() - rcu_dereference for indices with debug checking * @p: The pointer to read, prior to dereferencing * @c: The conditions under which the dereference will take place diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h index 0a3842aacba..eca75df00fe 100644 --- a/include/linux/reiserfs_fs.h +++ b/include/linux/reiserfs_fs.h @@ -1557,7 +1557,7 @@ struct tree_balance { /* When inserting an item. */ #define M_INSERT 'i' /* When inserting into (directories only) or appending onto an already - existant item. */ + existent item. */ #define M_PASTE 'p' /* When deleting an item. */ #define M_DELETE 'd' diff --git a/include/linux/sched.h b/include/linux/sched.h index 83bd2e2982f..4ec2c027e92 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -854,7 +854,7 @@ extern int __weak arch_sd_sibiling_asym_packing(void); /* * Optimise SD flags for power savings: - * SD_BALANCE_NEWIDLE helps agressive task consolidation and power savings. + * SD_BALANCE_NEWIDLE helps aggressive task consolidation and power savings. * Keep default SD flags if sched_{smt,mc}_power_saving=0 */ diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 239083bfea1..d0ae90af0b4 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -126,7 +126,7 @@ struct sk_buff; * GRO uses frags we allocate at least 16 regardless of page size. */ #if (65536/PAGE_SIZE + 2) < 16 -#define MAX_SKB_FRAGS 16 +#define MAX_SKB_FRAGS 16UL #else #define MAX_SKB_FRAGS (65536/PAGE_SIZE + 2) #endif @@ -474,7 +474,7 @@ static inline void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) extern void skb_dst_set_noref(struct sk_buff *skb, struct dst_entry *dst); /** - * skb_dst_is_noref - Test if skb dst isnt refcounted + * skb_dst_is_noref - Test if skb dst isn't refcounted * @skb: buffer */ static inline bool skb_dst_is_noref(const struct sk_buff *skb) diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h index bc21db598c0..76199b75d58 100644 --- a/include/linux/smc91x.h +++ b/include/linux/smc91x.h @@ -21,7 +21,7 @@ #define RPC_LED_10 (0x02) /* LED = 10Mbps link detect */ #define RPC_LED_FD (0x03) /* LED = Full Duplex Mode */ #define RPC_LED_TX_RX (0x04) /* LED = TX or RX packet occurred */ -#define RPC_LED_100 (0x05) /* LED = 100Mbps link dectect */ +#define RPC_LED_100 (0x05) /* LED = 100Mbps link detect */ #define RPC_LED_TX (0x06) /* LED = TX packet occurred */ #define RPC_LED_RX (0x07) /* LED = RX packet occurred */ diff --git a/include/linux/socket.h b/include/linux/socket.h index edbb1d07ddf..d2b5e982f07 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -88,7 +88,7 @@ struct cmsghdr { }; /* - * Ancilliary data object information MACROS + * Ancillary data object information MACROS * Table 5-14 of POSIX 1003.1g */ diff --git a/include/linux/soundcard.h b/include/linux/soundcard.h index 1904afedb82..fe204fe39f7 100644 --- a/include/linux/soundcard.h +++ b/include/linux/soundcard.h @@ -1231,7 +1231,7 @@ void seqbuf_dump(void); /* This function must be provided by programs */ #define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2) /* - * Timing and syncronization macros + * Timing and synchronization macros */ #define _TIMER_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\ diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h index bf0570a84f7..52d9ed01855 100644 --- a/include/linux/spi/spidev.h +++ b/include/linux/spi/spidev.h @@ -66,7 +66,7 @@ * are in a different address space (and may be of different sizes in some * cases, such as 32-bit i386 userspace over a 64-bit x86_64 kernel). * Zero-initialize the structure, including currently unused fields, to - * accomodate potential future updates. + * accommodate potential future updates. * * SPI_IOC_MESSAGE gives userspace the equivalent of kernel spi_sync(). * Pass it an array of related transfers, they'll execute together. diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h index 80e535897de..0b22d51258e 100644 --- a/include/linux/spinlock.h +++ b/include/linux/spinlock.h @@ -81,7 +81,7 @@ #include <linux/spinlock_types.h> /* - * Pull the arch_spin*() functions/declarations (UP-nondebug doesnt need them): + * Pull the arch_spin*() functions/declarations (UP-nondebug doesn't need them): */ #ifdef CONFIG_SMP # include <asm/spinlock.h> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index e1035291569..f29197a4b22 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -26,7 +26,7 @@ #ifndef __STMMAC_PLATFORM_DATA #define __STMMAC_PLATFORM_DATA -/* platfrom data for platfrom device structure's platfrom_data field */ +/* platform data for platform device structure's platform_data field */ /* Private data for the STM on-board ethernet driver */ struct plat_stmmacenet_data { diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h index 1808960c505..092dc9b1ce7 100644 --- a/include/linux/stop_machine.h +++ b/include/linux/stop_machine.h @@ -105,7 +105,7 @@ static inline int try_stop_cpus(const struct cpumask *cpumask, * @cpus: the cpus to run the @fn() on (NULL = any online cpu) * * Description: This causes a thread to be scheduled on every cpu, - * each of which disables interrupts. The result is that noone is + * each of which disables interrupts. The result is that no one is * holding a spinlock or inside any other preempt-disabled region when * @fn() runs. * diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index 7898ea13de7..8d2eef1a858 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -35,10 +35,10 @@ * Each cache must be registered so that it can be cleaned regularly. * When the cache is unregistered, it is flushed completely. * - * Entries have a ref count and a 'hashed' flag which counts the existance + * Entries have a ref count and a 'hashed' flag which counts the existence * in the hash table. * We only expire entries when refcount is zero. - * Existance in the cache is counted the refcount. + * Existence in the cache is counted the refcount. */ /* Every cache item has a common header that is used diff --git a/include/linux/sunrpc/svcauth_gss.h b/include/linux/sunrpc/svcauth_gss.h index ca7d725861f..83bbee3f089 100644 --- a/include/linux/sunrpc/svcauth_gss.h +++ b/include/linux/sunrpc/svcauth_gss.h @@ -2,7 +2,7 @@ * linux/include/linux/sunrpc/svcauth_gss.h * * Bruce Fields <bfields@umich.edu> - * Copyright (c) 2002 The Regents of the Unviersity of Michigan + * Copyright (c) 2002 The Regents of the University of Michigan */ #ifndef _LINUX_SUNRPC_SVCAUTH_GSS_H diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h index 8a75da551e4..dfb078db8eb 100644 --- a/include/linux/sysdev.h +++ b/include/linux/sysdev.h @@ -7,13 +7,13 @@ * We still have a notion of a driver for a system device, because we still * want to perform basic operations on these devices. * - * We also support auxillary drivers binding to devices of a certain class. + * We also support auxiliary drivers binding to devices of a certain class. * * This allows configurable drivers to register themselves for devices of * a certain type. And, it allows class definitions to reside in generic * code while arch-specific code can register specific drivers. * - * Auxillary drivers registered with a NULL cls are registered as drivers + * Auxiliary drivers registered with a NULL cls are registered as drivers * for all system devices, and get notification calls for each device. */ @@ -70,7 +70,7 @@ extern int sysdev_class_create_file(struct sysdev_class *, extern void sysdev_class_remove_file(struct sysdev_class *, struct sysdev_class_attribute *); /** - * Auxillary system device drivers. + * Auxiliary system device drivers. */ struct sysdev_driver { diff --git a/include/linux/timerqueue.h b/include/linux/timerqueue.h index d24aabaca47..a520fd70a59 100644 --- a/include/linux/timerqueue.h +++ b/include/linux/timerqueue.h @@ -24,7 +24,7 @@ extern struct timerqueue_node *timerqueue_iterate_next( struct timerqueue_node *node); /** - * timerqueue_getnext - Returns the timer with the earlies expiration time + * timerqueue_getnext - Returns the timer with the earliest expiration time * * @head: head of timerqueue * diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index 3a2e66d88a3..ebcfa4ebdbf 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -169,7 +169,7 @@ static inline int tracehook_unsafe_exec(struct task_struct *task) * tracehook_tracer_task - return the task that is tracing the given task * @tsk: task to consider * - * Returns NULL if noone is tracing @task, or the &struct task_struct + * Returns NULL if no one is tracing @task, or the &struct task_struct * pointer to its tracer. * * Must called under rcu_read_lock(). The pointer returned might be kept @@ -448,7 +448,7 @@ static inline int tracehook_force_sigpending(void) * * Return zero to check for a real pending signal normally. * Return -1 after releasing the siglock to repeat the check. - * Return a signal number to induce an artifical signal delivery, + * Return a signal number to induce an artificial signal delivery, * setting *@info and *@return_ka to specify its details and behavior. * * The @return_ka->sa_handler value controls the disposition of the diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h index 1b479091105..5c75153f944 100644 --- a/include/linux/ucb1400.h +++ b/include/linux/ucb1400.h @@ -8,7 +8,7 @@ * Copyright: MontaVista Software, Inc. * * Spliting done by: Marek Vasut <marek.vasut@gmail.com> - * If something doesnt work and it worked before spliting, e-mail me, + * If something doesn't work and it worked before spliting, e-mail me, * dont bother Nicolas please ;-) * * This program is free software; you can redistribute it and/or modify diff --git a/include/linux/usb.h b/include/linux/usb.h index e63efeb378e..65f78ca5d88 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -623,7 +623,7 @@ extern struct usb_host_interface *usb_find_alt_setting( * USB hubs. That makes it stay the same until systems are physically * reconfigured, by re-cabling a tree of USB devices or by moving USB host * controllers. Adding and removing devices, including virtual root hubs - * in host controller driver modules, does not change these path identifers; + * in host controller driver modules, does not change these path identifiers; * neither does rebooting or re-enumerating. These are more useful identifiers * than changeable ("unstable") ones like bus numbers or device addresses. * @@ -793,7 +793,7 @@ struct usbdrv_wrap { * usb_set_intfdata() to associate driver-specific data with the * interface. It may also use usb_set_interface() to specify the * appropriate altsetting. If unwilling to manage the interface, - * return -ENODEV, if genuine IO errors occured, an appropriate + * return -ENODEV, if genuine IO errors occurred, an appropriate * negative errno value. * @disconnect: Called when the interface is no longer accessible, usually * because its device has been (or is being) disconnected or the diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 3d29a7dcac2..882a084a841 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -188,7 +188,7 @@ ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs, * @bind() method is then used to initialize all the functions and then * call @usb_add_function() for them. * - * Those functions would normally be independant of each other, but that's + * Those functions would normally be independent of each other, but that's * not mandatory. CDC WMC devices are an example where functions often * depend on other functions, with some functions subsidiary to others. * Such interdependency may be managed in any way, so long as all of the diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index 65638024519..e49dfd45baa 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -159,7 +159,7 @@ struct ehci_regs { #define USBMODE_CM_IDLE (0<<0) /* idle state */ /* Moorestown has some non-standard registers, partially due to the fact that - * its EHCI controller has both TT and LPM support. HOSTPCx are extentions to + * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to * PORTSCx */ #define HOSTPC0 0x84 /* HOSTPC extension */ diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h index 6f649c13193..7587ef934ba 100644 --- a/include/linux/usb/functionfs.h +++ b/include/linux/usb/functionfs.h @@ -45,7 +45,7 @@ struct usb_functionfs_descs_head { * | off | name | type | description | * |-----+-----------+--------------+--------------------------------------| * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | - * | 4 | lenght | LE32 | length of the whole data chunk | + * | 4 | length | LE32 | length of the whole data chunk | * | 8 | fs_count | LE32 | number of full-speed descriptors | * | 12 | hs_count | LE32 | number of high-speed descriptors | * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | @@ -86,7 +86,7 @@ struct usb_functionfs_strings_head { * | 0 | lang | LE16 | language code | * | 2 | strings | String[str_count] | array of strings in given language | * - * For each string ther is one strings entry (ie. there are str_count + * For each string there is one strings entry (ie. there are str_count * string entries). Each String is a NUL terminated string encoded in * UTF-8. */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 006412ce230..e538172c0f6 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -72,7 +72,7 @@ struct usb_ep; * Bulk endpoints can use any size buffers, and can also be used for interrupt * transfers. interrupt-only endpoints can be much less functional. * - * NOTE: this is analagous to 'struct urb' on the host side, except that + * NOTE: this is analogous to 'struct urb' on the host side, except that * it's thinner and promotes more pre-allocation. */ @@ -269,7 +269,7 @@ static inline void usb_ep_free_request(struct usb_ep *ep, * * Control endpoints ... after getting a setup() callback, the driver queues * one response (even if it would be zero length). That enables the - * status ack, after transfering data as specified in the response. Setup + * status ack, after transferring data as specified in the response. Setup * functions may return negative error codes to generate protocol stalls. * (Note that some USB device controllers disallow protocol stall responses * in some cases.) When control responses are deferred (the response is diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h index 1d104086566..c8c52e3c91d 100644 --- a/include/linux/usb/midi.h +++ b/include/linux/usb/midi.h @@ -70,7 +70,7 @@ struct usb_midi_out_jack_descriptor { __u8 bJackID; __u8 bNrInputPins; /* p */ struct usb_midi_source_pin pins[]; /* [p] */ - /*__u8 iJack; -- ommitted due to variable-sized pins[] */ + /*__u8 iJack; -- omitted due to variable-sized pins[] */ } __attribute__ ((packed)); #define USB_DT_MIDI_OUT_SIZE(p) (7 + 2 * (p)) diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 44842c8d38c..3c7329b8ea0 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -97,11 +97,14 @@ struct driver_info { #define FLAG_LINK_INTR 0x0800 /* updates link (carrier) status */ +#define FLAG_POINTTOPOINT 0x1000 /* possibly use "usb%d" names */ + /* * Indicates to usbnet, that USB driver accumulates multiple IP packets. * Affects statistic (counters) and short packet handling. */ #define FLAG_MULTI_PACKET 0x1000 +#define FLAG_RX_ASSEMBLE 0x2000 /* rx packets may span >1 frames */ /* init device ... can sleep, or cause probe() failure */ int (*bind)(struct usbnet *, struct usb_interface *); @@ -172,7 +175,9 @@ struct cdc_state { }; extern int usbnet_generic_cdc_bind(struct usbnet *, struct usb_interface *); +extern int usbnet_cdc_bind(struct usbnet *, struct usb_interface *); extern void usbnet_cdc_unbind(struct usbnet *, struct usb_interface *); +extern void usbnet_cdc_status(struct usbnet *, struct urb *); /* CDC and RNDIS support the same host-chosen packet filters for IN transfers */ #define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \ diff --git a/include/linux/usb/wusb.h b/include/linux/usb/wusb.h index 63ebdcc5dda..0c4d4ca370e 100644 --- a/include/linux/usb/wusb.h +++ b/include/linux/usb/wusb.h @@ -126,7 +126,7 @@ enum { /** * WUSB IE: Channel Stop (WUSB1.0[7.5.8]) * - * Tells devices the host is going to stop sending MMCs and will dissapear. + * Tells devices the host is going to stop sending MMCs and will disappear. */ struct wuie_channel_stop { struct wuie_hdr hdr; diff --git a/include/linux/uwb.h b/include/linux/uwb.h index 7fc9746f22c..b0c564ec216 100644 --- a/include/linux/uwb.h +++ b/include/linux/uwb.h @@ -274,7 +274,7 @@ static inline void uwb_mas_bm_copy_le(void *dst, const struct uwb_mas_bm *mas) /** * struct uwb_drp_avail - a radio controller's view of MAS usage - * @global: MAS unused by neighbors (excluding reservations targetted + * @global: MAS unused by neighbors (excluding reservations targeted * or owned by the local radio controller) or the beaon period * @local: MAS unused by local established reservations * @pending: MAS unused by local pending reservations @@ -702,10 +702,10 @@ void edc_init(struct edc *edc) edc->timestart = jiffies; } -/* Called when an error occured. +/* Called when an error occurred. * This is way to determine if the number of acceptable errors per time * period has been exceeded. It is not accurate as there are cases in which - * this scheme will not work, for example if there are periodic occurences + * this scheme will not work, for example if there are periodic occurrences * of errors that straddle updates to the start time. This scheme is * sufficient for our usage. * diff --git a/include/linux/uwb/umc.h b/include/linux/uwb/umc.h index 4b4fc0f4385..7b4842028ca 100644 --- a/include/linux/uwb/umc.h +++ b/include/linux/uwb/umc.h @@ -132,7 +132,7 @@ int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc); * * FIXME: This is as dirty as it gets, but we need some way to check * the correct type of umc_dev->parent (so that for example, we can - * cast to pci_dev). Casting to pci_dev is necesary because at some + * cast to pci_dev). Casting to pci_dev is necessary because at some * point we need to request resources from the device. Mapping is * easily over come (ioremap and stuff are bus agnostic), but hooking * up to some error handlers (such as pci error handlers) might need diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index e9e1524b582..9c3120dca29 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -78,7 +78,7 @@ extern void vga_set_legacy_decoding(struct pci_dev *pdev, * wether the card is doing legacy decoding for that type of resource. If * yes, the lock is "converted" into a legacy resource lock. * The arbiter will first look for all VGA cards that might conflict - * and disable their IOs and/or Memory access, inlcuding VGA forwarding + * and disable their IOs and/or Memory access, including VGA forwarding * on P2P bridges if necessary, so that the requested resources can * be used. Then, the card is marked as locking these resources and * the IO and/or Memory accesse are enabled on the card (including @@ -187,7 +187,7 @@ extern struct pci_dev *vga_default_device(void); * vga_conflicts * * Architectures should define this if they have several - * independant PCI domains that can afford concurrent VGA + * independent PCI domains that can afford concurrent VGA * decoding */ diff --git a/include/linux/wimax.h b/include/linux/wimax.h index 4fdcc563551..9f6b77af2f6 100644 --- a/include/linux/wimax.h +++ b/include/linux/wimax.h @@ -114,7 +114,7 @@ enum { WIMAX_GNL_RESET_IFIDX = 1, }; -/* Atributes for wimax_state_get() */ +/* Attributes for wimax_state_get() */ enum { WIMAX_GNL_STGET_IFIDX = 1, }; diff --git a/include/linux/xilinxfb.h b/include/linux/xilinxfb.h index f2463f559fb..5a155a96805 100644 --- a/include/linux/xilinxfb.h +++ b/include/linux/xilinxfb.h @@ -16,7 +16,7 @@ /* ML300/403 reference design framebuffer driver platform data struct */ struct xilinxfb_platform_data { u32 rotate_screen; /* Flag to rotate display 180 degrees */ - u32 screen_height_mm; /* Physical dimentions of screen in mm */ + u32 screen_height_mm; /* Physical dimensions of screen in mm */ u32 screen_width_mm; u32 xres, yres; /* resolution of screen in pixels */ u32 xvirt, yvirt; /* resolution of memory buffer */ diff --git a/include/media/davinci/dm355_ccdc.h b/include/media/davinci/dm355_ccdc.h index df8a7b10747..adf2fe4bf0b 100644 --- a/include/media/davinci/dm355_ccdc.h +++ b/include/media/davinci/dm355_ccdc.h @@ -193,7 +193,7 @@ struct ccdc_dft_corr_mem_ctl { #define CCDC_DFT_TABLE_SIZE 16 /* * Main Structure for vertical defect correction. Vertical defect - * correction can correct upto 16 defects if defects less than 16 + * correction can correct up to 16 defects if defects less than 16 * then pad the rest with 0 */ struct ccdc_vertical_dft { diff --git a/include/media/davinci/isif.h b/include/media/davinci/isif.h index b0b74ad618c..7f3d76a4b9e 100644 --- a/include/media/davinci/isif.h +++ b/include/media/davinci/isif.h @@ -199,7 +199,7 @@ struct isif_black_clamp { }; /************************************************************************* -** Color Space Convertion (CSC) +** Color Space Conversion (CSC) *************************************************************************/ #define ISIF_CSC_NUM_COEFF 16 struct isif_color_space_conv { diff --git a/include/media/lirc.h b/include/media/lirc.h index 6678a169fd9..4b3ab2966b5 100644 --- a/include/media/lirc.h +++ b/include/media/lirc.h @@ -137,7 +137,7 @@ */ #define LIRC_SET_REC_FILTER_SPACE _IOW('i', 0x0000001b, __u32) /* - * if filter cannot be set independantly for pulse/space, this should + * if filter cannot be set independently for pulse/space, this should * be used */ #define LIRC_SET_REC_FILTER _IOW('i', 0x0000001c, __u32) diff --git a/include/net/9p/9p.h b/include/net/9p/9p.h index 6b75a697134..cdf2e8ac430 100644 --- a/include/net/9p/9p.h +++ b/include/net/9p/9p.h @@ -119,7 +119,7 @@ do { \ * @P9_TREAD: request to transfer data from a file or directory * @P9_RREAD: response with data requested * @P9_TWRITE: reuqest to transfer data to a file - * @P9_RWRITE: response with out much data was transfered to file + * @P9_RWRITE: response with out much data was transferred to file * @P9_TCLUNK: forget about a handle to an entity within the file system * @P9_RCLUNK: response when server has forgotten about the handle * @P9_TREMOVE: request to remove an entity from the hierarchy @@ -294,7 +294,7 @@ enum p9_perm_t { * * QID types are a subset of permissions - they are primarily * used to differentiate semantics for a file system entity via - * a jump-table. Their value is also the most signifigant 16 bits + * a jump-table. Their value is also the most significant 16 bits * of the permission_t * * See Also: http://plan9.bell-labs.com/magic/man2html/2/stat @@ -366,8 +366,8 @@ struct p9_qid { /** * struct p9_stat - file system metadata information * @size: length prefix for this stat structure instance - * @type: the type of the server (equivilent to a major number) - * @dev: the sub-type of the server (equivilent to a minor number) + * @type: the type of the server (equivalent to a major number) + * @dev: the sub-type of the server (equivalent to a minor number) * @qid: unique id from the server of type &p9_qid * @mode: Plan 9 format permissions of type &p9_perm_t * @atime: Last access/read time diff --git a/include/net/9p/client.h b/include/net/9p/client.h index 0a30977e3c1..85c1413f054 100644 --- a/include/net/9p/client.h +++ b/include/net/9p/client.h @@ -101,7 +101,7 @@ enum p9_req_status_t { * Transport use an array to track outstanding requests * instead of a list. While this may incurr overhead during initial * allocation or expansion, it makes request lookup much easier as the - * tag id is a index into an array. (We use tag+1 so that we can accomodate + * tag id is a index into an array. (We use tag+1 so that we can accommodate * the -1 tag for the T_VERSION request). * This also has the nice effect of only having to allocate wait_queues * once, instead of constantly allocating and freeing them. Its possible diff --git a/include/net/9p/transport.h b/include/net/9p/transport.h index 82868f18c57..8f08c736c4c 100644 --- a/include/net/9p/transport.h +++ b/include/net/9p/transport.h @@ -30,7 +30,7 @@ /* Default. Add Payload to PDU before sending it down to transport layer */ #define P9_TRANS_PREF_PAYLOAD_DEF 0x0 -/* Send pay load seperately to transport layer along with PDU.*/ +/* Send pay load separately to transport layer along with PDU.*/ #define P9_TRANS_PREF_PAYLOAD_SEP 0x1 /** diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index ec6acf2f1c0..2c0d309c738 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -84,6 +84,8 @@ enum { HCI_SERVICE_CACHE, HCI_LINK_KEYS, HCI_DEBUG_KEYS, + + HCI_RESET, }; /* HCI ioctl defines */ diff --git a/include/net/caif/cfcnfg.h b/include/net/caif/cfcnfg.h index f688478bfb8..f33d3634113 100644 --- a/include/net/caif/cfcnfg.h +++ b/include/net/caif/cfcnfg.h @@ -69,7 +69,7 @@ void cfcnfg_remove(struct cfcnfg *cfg); * cfcnfg_add_adapt_layer to specify PHY for the link. * @pref: The phy (link layer) preference. * @fcs: Specify if checksum is used in CAIF Framing Layer. - * @stx: Specify if Start Of Frame eXtention is used. + * @stx: Specify if Start Of Frame extension is used. */ void diff --git a/include/net/gen_stats.h b/include/net/gen_stats.h index fa157712e98..a79b6cfb02a 100644 --- a/include/net/gen_stats.h +++ b/include/net/gen_stats.h @@ -11,7 +11,7 @@ struct gnet_dump { struct sk_buff * skb; struct nlattr * tail; - /* Backward compatability */ + /* Backward compatibility */ int compat_tc_stats; int compat_xstats; void * xstats; diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h index 04977eefb0e..fccc2180c61 100644 --- a/include/net/if_inet6.h +++ b/include/net/if_inet6.h @@ -286,5 +286,21 @@ static inline void ipv6_ib_mc_map(const struct in6_addr *addr, buf[9] = broadcast[9]; memcpy(buf + 10, addr->s6_addr + 6, 10); } + +static inline int ipv6_ipgre_mc_map(const struct in6_addr *addr, + const unsigned char *broadcast, char *buf) +{ + if ((broadcast[0] | broadcast[1] | broadcast[2] | broadcast[3]) != 0) { + memcpy(buf, broadcast, 4); + } else { + /* v4mapped? */ + if ((addr->s6_addr32[0] | addr->s6_addr32[1] | + (addr->s6_addr32[2] ^ htonl(0x0000ffff))) != 0) + return -EINVAL; + memcpy(buf, &addr->s6_addr32[3], 4); + } + return 0; +} + #endif #endif diff --git a/include/net/ip.h b/include/net/ip.h index a4f631108c5..7c416583b71 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -339,6 +339,14 @@ static inline void ip_ib_mc_map(__be32 naddr, const unsigned char *broadcast, ch buf[16] = addr & 0x0f; } +static inline void ip_ipgre_mc_map(__be32 naddr, const unsigned char *broadcast, char *buf) +{ + if ((broadcast[0] | broadcast[1] | broadcast[2] | broadcast[3]) != 0) + memcpy(buf, broadcast, 4); + else + memcpy(buf, &naddr, sizeof(naddr)); +} + #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) #include <linux/ipv6.h> #endif diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 30b49ed72f0..d516f00c8e0 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -52,7 +52,7 @@ static inline struct net *skb_net(const struct sk_buff *skb) */ if (likely(skb->dev && skb->dev->nd_net)) return dev_net(skb->dev); - if (skb_dst(skb)->dev) + if (skb_dst(skb) && skb_dst(skb)->dev) return dev_net(skb_dst(skb)->dev); WARN(skb->sk, "Maybe skb_sknet should be used in %s() at line:%d\n", __func__, __LINE__); @@ -92,7 +92,7 @@ static inline struct net *skb_sknet(const struct sk_buff *skb) } /* * This one needed for single_open_net since net is stored directly in - * private not as a struct i.e. seq_file_net cant be used. + * private not as a struct i.e. seq_file_net can't be used. */ static inline struct net *seq_file_single_net(struct seq_file *seq) { diff --git a/include/net/irda/irlap.h b/include/net/irda/irlap.h index 17fcd964f9d..fb4b76d5d7f 100644 --- a/include/net/irda/irlap.h +++ b/include/net/irda/irlap.h @@ -204,7 +204,7 @@ struct irlap_cb { notify_t notify; /* Callbacks to IrLMP */ - int mtt_required; /* Minumum turnaround time required */ + int mtt_required; /* Minimum turnaround time required */ int xbofs_delay; /* Nr of XBOF's used to MTT */ int bofs_count; /* Negotiated extra BOFs */ int next_bofs; /* Negotiated extra BOFs after next frame */ diff --git a/include/net/irda/wrapper.h b/include/net/irda/wrapper.h index 2942ad6ab93..eef53ebe3d7 100644 --- a/include/net/irda/wrapper.h +++ b/include/net/irda/wrapper.h @@ -42,7 +42,7 @@ #define IRDA_TRANS 0x20 /* Asynchronous transparency modifier */ -/* States for receving a frame in async mode */ +/* States for receiving a frame in async mode */ enum { OUTSIDE_FRAME, BEGIN_FRAME, diff --git a/include/net/iucv/iucv.h b/include/net/iucv/iucv.h index 205a3360156..1121baa9f69 100644 --- a/include/net/iucv/iucv.h +++ b/include/net/iucv/iucv.h @@ -173,7 +173,7 @@ struct iucv_handler { /* * The message_pending function is called after an icuv interrupt * type 0x06 or type 0x07 has been received. A new message is - * availabe and can be received with iucv_message_receive. + * available and can be received with iucv_message_receive. */ void (*message_pending)(struct iucv_path *, struct iucv_message *); /* diff --git a/include/net/iw_handler.h b/include/net/iw_handler.h index 3afdb21cc31..5d5a6a4732e 100644 --- a/include/net/iw_handler.h +++ b/include/net/iw_handler.h @@ -91,7 +91,7 @@ * -------------------- * The implementation goals were as follow : * o Obvious : you should not need a PhD to understand what's happening, - * the benefit is easier maintainance. + * the benefit is easier maintenance. * o Flexible : it should accommodate a wide variety of driver * implementations and be as flexible as the old API. * o Lean : it should be efficient memory wise to minimise the impact @@ -129,7 +129,7 @@ * * Functions prototype uses union iwreq_data * ----------------------------------------- - * Some would have prefered functions defined this way : + * Some would have preferred functions defined this way : * static int mydriver_ioctl_setrate(struct net_device *dev, * long rate, int auto) * 1) The kernel code doesn't "validate" the content of iwreq_data, and diff --git a/include/net/mac80211.h b/include/net/mac80211.h index cefe1b37c49..025d4cc7bbf 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1294,7 +1294,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * acceleration (i.e. iwlwifi). Those drivers should provide update_tkip_key * handler. * The update_tkip_key() call updates the driver with the new phase 1 key. - * This happens everytime the iv16 wraps around (every 65536 packets). The + * This happens every time the iv16 wraps around (every 65536 packets). The * set_key() call will happen only once for each key (unless the AP did * rekeying), it will not include a valid phase 1 key. The valid phase 1 key is * provided by update_tkip_key only. The trigger that makes mac80211 call this @@ -1753,8 +1753,19 @@ enum ieee80211_ampdu_mlme_action { * that TX/RX_STOP can pass NULL for this parameter. * The @buf_size parameter is only valid when the action is set to * %IEEE80211_AMPDU_TX_OPERATIONAL and indicates the peer's reorder - * buffer size (number of subframes) for this session -- aggregates - * containing more subframes than this may not be transmitted to the peer. + * buffer size (number of subframes) for this session -- the driver + * may neither send aggregates containing more subframes than this + * nor send aggregates in a way that lost frames would exceed the + * buffer size. If just limiting the aggregate size, this would be + * possible with a buf_size of 8: + * - TX: 1.....7 + * - RX: 2....7 (lost frame #1) + * - TX: 8..1... + * which is invalid since #1 was now re-transmitted well past the + * buffer size of 8. Correct ways to retransmit #1 would be: + * - TX: 1 or 18 or 81 + * Even "189" would be wrong since 1 could be lost again. + * * Returns a negative error code on failure. * The callback can sleep. * diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h index d9549af6929..65afc496620 100644 --- a/include/net/pkt_sched.h +++ b/include/net/pkt_sched.h @@ -32,7 +32,7 @@ static inline void *qdisc_priv(struct Qdisc *q) The result: [34]86 is not good choice for QoS router :-( - The things are not so bad, because we may use artifical + The things are not so bad, because we may use artificial clock evaluated by integration of network data flow in the most critical places. */ diff --git a/include/net/route.h b/include/net/route.h index f88429cad52..8fce0621cad 100644 --- a/include/net/route.h +++ b/include/net/route.h @@ -64,6 +64,7 @@ struct rtable { __be32 rt_dst; /* Path destination */ __be32 rt_src; /* Path source */ + int rt_route_iif; int rt_iif; int rt_oif; __u32 rt_mark; @@ -80,12 +81,12 @@ struct rtable { static inline bool rt_is_input_route(struct rtable *rt) { - return rt->rt_iif != 0; + return rt->rt_route_iif != 0; } static inline bool rt_is_output_route(struct rtable *rt) { - return rt->rt_iif == 0; + return rt->rt_route_iif == 0; } struct ip_rt_acct { diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index cc9185ca8fd..0f6e60a9c30 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -422,7 +422,7 @@ struct sctp_cookie { __u32 adaptation_ind; __u8 auth_random[sizeof(sctp_paramhdr_t) + SCTP_AUTH_RANDOM_LENGTH]; - __u8 auth_hmacs[SCTP_AUTH_NUM_HMACS + 2]; + __u8 auth_hmacs[SCTP_AUTH_NUM_HMACS * sizeof(__u16) + 2]; __u8 auth_chunks[sizeof(sctp_paramhdr_t) + SCTP_AUTH_MAX_CHUNKS]; /* This is a shim for my peer's INIT packet, followed by diff --git a/include/net/sock.h b/include/net/sock.h index da0534d3401..01810a3f19d 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1749,7 +1749,7 @@ void sock_net_set(struct sock *sk, struct net *net) /* * Kernel sockets, f.e. rtnl or icmp_socket, are a part of a namespace. - * They should not hold a referrence to a namespace in order to allow + * They should not hold a reference to a namespace in order to allow * to stop it. * Sockets after sk_change_net should be released using sk_release_kernel */ diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h index eeb077dd735..a8122dc5641 100644 --- a/include/net/transp_v6.h +++ b/include/net/transp_v6.h @@ -16,7 +16,7 @@ extern struct proto tcpv6_prot; struct flowi6; -/* extention headers */ +/* extension headers */ extern int ipv6_exthdrs_init(void); extern void ipv6_exthdrs_exit(void); extern int ipv6_frag_init(void); diff --git a/include/net/wimax.h b/include/net/wimax.h index 3461aa1df1e..c799ba7b708 100644 --- a/include/net/wimax.h +++ b/include/net/wimax.h @@ -286,7 +286,7 @@ struct wimax_dev; * does not disconnect the device from the bus and return 0. * If that fails, it should resort to some sort of cold or bus * reset (even if it implies a bus disconnection and device - * dissapearance). In that case, -ENODEV should be returned to + * disappearance). In that case, -ENODEV should be returned to * indicate the device is gone. * This operation has to be synchronous, and return only when the * reset is complete. In case of having had to resort to bus/cold diff --git a/include/net/wpan-phy.h b/include/net/wpan-phy.h index 85926231c07..d86fffd3c03 100644 --- a/include/net/wpan-phy.h +++ b/include/net/wpan-phy.h @@ -28,7 +28,7 @@ struct wpan_phy { struct mutex pib_lock; /* - * This is a PIB acording to 802.15.4-2006. + * This is a PIB according to 802.15.4-2006. * We do not provide timing-related variables, as they * aren't used outside of driver */ diff --git a/include/rxrpc/packet.h b/include/rxrpc/packet.h index 9b2c30897e5..f2902ef7ab7 100644 --- a/include/rxrpc/packet.h +++ b/include/rxrpc/packet.h @@ -148,7 +148,7 @@ struct rxkad_challenge { * Kerberos security type-2 response packet */ struct rxkad_response { - __be32 version; /* version of this reponse type */ + __be32 version; /* version of this response type */ __be32 __pad; /* encrypted bit of the response */ diff --git a/include/scsi/fc/fc_fcp.h b/include/scsi/fc/fc_fcp.h index 8a143ca7987..652dec23051 100644 --- a/include/scsi/fc/fc_fcp.h +++ b/include/scsi/fc/fc_fcp.h @@ -75,7 +75,7 @@ struct fcp_cmnd32 { #define FCP_PTA_SIMPLE 0 /* simple task attribute */ #define FCP_PTA_HEADQ 1 /* head of queue task attribute */ #define FCP_PTA_ORDERED 2 /* ordered task attribute */ -#define FCP_PTA_ACA 4 /* auto. contigent allegiance */ +#define FCP_PTA_ACA 4 /* auto. contingent allegiance */ #define FCP_PTA_MASK 7 /* mask for task attribute field */ #define FCP_PRI_SHIFT 3 /* priority field starts in bit 3 */ #define FCP_PRI_RESVD_MASK 0x80 /* reserved bits in priority field */ diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index c3e1cbcc2ad..ddb04568a50 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -292,7 +292,7 @@ enum iscsi_param { ISCSI_PARAM_PERSISTENT_PORT, ISCSI_PARAM_SESS_RECOVERY_TMO, - /* pased in through bind conn using transport_fd */ + /* passed in through bind conn using transport_fd */ ISCSI_PARAM_CONN_PORT, ISCSI_PARAM_CONN_ADDRESS, diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 24193c1b0da..a3cbda4ddb5 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -260,7 +260,7 @@ struct fcoe_dev_stats { /** * struct fc_seq_els_data - ELS data used for passing ELS specific responses * @reason: The reason for rejection - * @explan: The explaination of the rejection + * @explan: The explanation of the rejection * * Mainly used by the exchange manager layer. */ @@ -525,7 +525,7 @@ struct libfc_function_template { struct fc_frame *); /* - * Send an ELS response using infomation from the received frame. + * Send an ELS response using information from the received frame. * * STATUS: OPTIONAL */ @@ -663,7 +663,7 @@ struct libfc_function_template { int (*rport_logoff)(struct fc_rport_priv *); /* - * Recieve a request from a remote port. + * Receive a request from a remote port. * * STATUS: OPTIONAL */ @@ -704,7 +704,7 @@ struct libfc_function_template { void *)); /* - * Cleanup the FCP layer, used durring link down and reset + * Cleanup the FCP layer, used during link down and reset * * STATUS: OPTIONAL */ diff --git a/include/scsi/libiscsi_tcp.h b/include/scsi/libiscsi_tcp.h index e6b9fd2eea3..ac0cc1d925e 100644 --- a/include/scsi/libiscsi_tcp.h +++ b/include/scsi/libiscsi_tcp.h @@ -52,7 +52,7 @@ struct iscsi_segment { iscsi_segment_done_fn_t *done; }; -/* Socket connection recieve helper */ +/* Socket connection receive helper */ struct iscsi_tcp_recv { struct iscsi_hdr *hdr; struct iscsi_segment segment; diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h index 53a9e886612..0a5079974fe 100644 --- a/include/scsi/osd_initiator.h +++ b/include/scsi/osd_initiator.h @@ -265,7 +265,7 @@ int osd_execute_request_async(struct osd_request *or, * @osi - Recievs a more detailed error report information (optional). * @silent - Do not print to dmsg (Even if enabled) * @bad_obj_list - Some commands act on multiple objects. Failed objects will - * be recieved here (optional) + * be received here (optional) * @max_obj - Size of @bad_obj_list. * @bad_attr_list - List of failing attributes (optional) * @max_attr - Size of @bad_attr_list. diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index e7e385842a3..f1f2644137b 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -46,7 +46,7 @@ struct blk_queue_tags; enum { SCSI_QDEPTH_DEFAULT, /* default requested change, e.g. from sysfs */ SCSI_QDEPTH_QFULL, /* scsi-ml requested due to queue full */ - SCSI_QDEPTH_RAMP_UP, /* scsi-ml requested due to threshhold event */ + SCSI_QDEPTH_RAMP_UP, /* scsi-ml requested due to threshold event */ }; struct scsi_host_template { diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index 59816fe31e6..2a65167a8f1 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -192,9 +192,9 @@ struct fc_vport_identifiers { * * This structure exists for each FC port is a virtual FC port. Virtual * ports share the physical link with the Physical port. Each virtual - * ports has a unique presense on the SAN, and may be instantiated via + * ports has a unique presence on the SAN, and may be instantiated via * NPIV, Virtual Fabrics, or via additional ALPAs. As the vport is a - * unique presense, each vport has it's own view of the fabric, + * unique presence, each vport has it's own view of the fabric, * authentication privilege, and priorities. * * A virtual port may support 1 or more FC4 roles. Typically it is a @@ -370,7 +370,7 @@ struct fc_rport { /* aka fc_starget_attrs */ /* * FC SCSI Target Attributes * - * The SCSI Target is considered an extention of a remote port (as + * The SCSI Target is considered an extension of a remote port (as * a remote port can be more than a SCSI Target). Within the scsi * subsystem, we leave the Target as a separate entity. Doing so * provides backward compatibility with prior FC transport api's, diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index f1dcefe4532..02cbb50225b 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -385,7 +385,7 @@ #define AC97_SCAP_DETECT_BY_VENDOR (1<<8) /* use vendor registers for read tests */ #define AC97_SCAP_NO_SPDIF (1<<9) /* don't build SPDIF controls */ #define AC97_SCAP_EAPD_LED (1<<10) /* EAPD as mute LED */ -#define AC97_SCAP_POWER_SAVE (1<<11) /* capable for aggresive power-saving */ +#define AC97_SCAP_POWER_SAVE (1<<11) /* capable for aggressive power-saving */ /* ac97->flags */ #define AC97_HAS_PC_BEEP (1<<0) /* force PC Speaker usage */ diff --git a/include/sound/control.h b/include/sound/control.h index e67db286936..404acb859ce 100644 --- a/include/sound/control.h +++ b/include/sound/control.h @@ -191,7 +191,7 @@ int _snd_ctl_add_slave(struct snd_kcontrol *master, struct snd_kcontrol *slave, * Returns zero if successful or a negative error code. * * All slaves must be the same type (returning the same information - * via info callback). The fucntion doesn't check it, so it's your + * via info callback). The function doesn't check it, so it's your * responsibility. * * Also, some additional limitations: diff --git a/include/sound/cs46xx_dsp_spos.h b/include/sound/cs46xx_dsp_spos.h index 49b03c9e5e5..8008c59288a 100644 --- a/include/sound/cs46xx_dsp_spos.h +++ b/include/sound/cs46xx_dsp_spos.h @@ -147,7 +147,7 @@ struct dsp_pcm_channel_descriptor { }; struct dsp_spos_instance { - struct dsp_symbol_desc symbol_table; /* currently availble loaded symbols in SP */ + struct dsp_symbol_desc symbol_table; /* currently available loaded symbols in SP */ int nmodules; struct dsp_module_desc * modules; /* modules loaded into SP */ diff --git a/include/sound/hdspm.h b/include/sound/hdspm.h index 1774ff5ff63..1f59ea2a4a7 100644 --- a/include/sound/hdspm.h +++ b/include/sound/hdspm.h @@ -193,7 +193,7 @@ struct hdspm_version { * 32768 Bytes */ -/* organisation is 64 channelfader in a continous memory block */ +/* organisation is 64 channelfader in a continuous memory block */ /* equivalent to hardware definition, maybe for future feature of mmap of * them */ diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index ddc2b3d6be0..f72c1039a6f 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -23,7 +23,7 @@ /* * SoC dynamic audio power management * - * We can have upto 4 power domains + * We can have up to 4 power domains * 1. Codec domain - VREF, VMID * Usually controlled at codec probe/remove, although can be set * at stream time if power is not needed for sidetone, etc. diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index c15ed5026fb..1d3b5b2f0db 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -22,7 +22,7 @@ * Note that both include/scsi/scsi_cmnd.h:MAX_COMMAND_SIZE and * include/linux/blkdev.h:BLOCK_MAX_CDB as of v2.6.36-rc4 still use * 16-byte CDBs by default and require an extra allocation for - * 32-byte CDBs to becasue of legacy issues. + * 32-byte CDBs to because of legacy issues. * * Within TCM Core there are no such legacy limitiations, so we go ahead * use 32-byte CDBs by default and use include/scsi/scsi.h:scsi_command_size() @@ -302,7 +302,7 @@ struct t10_wwn { /* - * Used by TCM Core internally to signal if >= SPC-3 peristent reservations + * Used by TCM Core internally to signal if >= SPC-3 persistent reservations * emulation is enabled or disabled, or running in with TCM/pSCSI passthrough * mode */ @@ -934,7 +934,7 @@ struct se_portal_group { struct list_head acl_node_list; struct se_lun *tpg_lun_list; struct se_lun tpg_virt_lun0; - /* List of TCM sessions assoicated wth this TPG */ + /* List of TCM sessions associated wth this TPG */ struct list_head tpg_sess_list; /* Pointer to $FABRIC_MOD dependent code */ struct target_core_fabric_ops *se_tpg_tfo; diff --git a/include/target/target_core_fabric_ops.h b/include/target/target_core_fabric_ops.h index 5eb8b1ae59d..dc78f77f945 100644 --- a/include/target/target_core_fabric_ops.h +++ b/include/target/target_core_fabric_ops.h @@ -35,7 +35,7 @@ struct target_core_fabric_ops { /* * Optional function pointer for TCM to perform command map * from TCM processing thread context, for those struct se_cmd - * initally allocated in interrupt context. + * initially allocated in interrupt context. */ int (*new_cmd_map)(struct se_cmd *); /* diff --git a/include/video/kyro.h b/include/video/kyro.h index dba7de2ee4a..c563968e926 100644 --- a/include/video/kyro.h +++ b/include/video/kyro.h @@ -32,7 +32,7 @@ struct kyrofb_info { u32 PIXCLK; /* Pixel Clock */ u32 HCLK; /* Hor Clock */ - /* Usefull to hold depth here for Linux */ + /* Useful to hold depth here for Linux */ u8 PIXDEPTH; #ifdef CONFIG_MTRR diff --git a/include/video/neomagic.h b/include/video/neomagic.h index 08b66378295..bc5013e8059 100644 --- a/include/video/neomagic.h +++ b/include/video/neomagic.h @@ -129,7 +129,7 @@ struct neofb_par { unsigned char CRTC[25]; /* Crtc Controller */ unsigned char Sequencer[5]; /* Video Sequencer */ unsigned char Graphics[9]; /* Video Graphics */ - unsigned char Attribute[21]; /* Video Atribute */ + unsigned char Attribute[21]; /* Video Attribute */ unsigned char GeneralLockReg; unsigned char ExtCRTDispAddr; diff --git a/include/video/newport.h b/include/video/newport.h index 001b935e71c..3d7c4b492ec 100644 --- a/include/video/newport.h +++ b/include/video/newport.h @@ -5,7 +5,7 @@ * * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) * - * Ulf Carlsson - Compability with the IRIX structures added + * Ulf Carlsson - Compatibility with the IRIX structures added */ #ifndef _SGI_NEWPORT_H diff --git a/include/video/sisfb.h b/include/video/sisfb.h index fdd74f1a679..6dc5df9e43f 100644 --- a/include/video/sisfb.h +++ b/include/video/sisfb.h @@ -151,7 +151,7 @@ struct sisfb_cmd { __u32 sisfb_result[4]; }; -/* Addtional IOCTLs for communication sisfb <> X driver */ +/* Additional IOCTLs for communication sisfb <> X driver */ /* If changing this, vgatypes.h must also be changed (for X driver) */ /* ioctl for identifying and giving some info (esp. memory heap start) */ diff --git a/include/video/sstfb.h b/include/video/sstfb.h index b52f0738124..c449eace12c 100644 --- a/include/video/sstfb.h +++ b/include/video/sstfb.h @@ -156,7 +156,7 @@ #define DAC_READ FBIINIT2 /* in remap mode */ #define FBIINIT3 0x021c /* fbi controls */ # define DISABLE_TEXTURE BIT(6) -# define Y_SWAP_ORIGIN_SHIFT 22 /* Y swap substraction value */ +# define Y_SWAP_ORIGIN_SHIFT 22 /* Y swap subtraction value */ #define HSYNC 0x0220 #define VSYNC 0x0224 #define DAC_DATA 0x022c @@ -212,9 +212,9 @@ # define DACREG_CR0_24BPP 0x50 /* mode 5 */ #define DACREG_CR1_I 0x05 #define DACREG_CC_I 0x06 -# define DACREG_CC_CLKA BIT(7) /* clk A controled by regs */ +# define DACREG_CC_CLKA BIT(7) /* clk A controlled by regs */ # define DACREG_CC_CLKA_C (2<<4) /* clk A uses reg C */ -# define DACREG_CC_CLKB BIT(3) /* clk B controled by regs */ +# define DACREG_CC_CLKB BIT(3) /* clk B controlled by regs */ # define DACREG_CC_CLKB_D 3 /* clkB uses reg D */ #define DACREG_AC0_I 0x48 /* clock A reg C */ #define DACREG_AC1_I 0x49 diff --git a/include/xen/interface/elfnote.h b/include/xen/interface/elfnote.h index 7a8262c375c..0360b15f488 100644 --- a/include/xen/interface/elfnote.h +++ b/include/xen/interface/elfnote.h @@ -51,7 +51,7 @@ /* * The offset of the ELF paddr field from the acutal required - * psuedo-physical address (numeric). + * pseudo-physical address (numeric). * * This is used to maintain backwards compatibility with older kernels * which wrote __PAGE_OFFSET into that field. This field defaults to 0 |