summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/platform_data/dma-ep93xx.h93
-rw-r--r--include/linux/platform_data/keypad-ep93xx.h35
-rw-r--r--include/linux/platform_data/spi-ep93xx.h29
-rw-r--r--include/linux/platform_data/video-ep93xx.h56
4 files changed, 213 insertions, 0 deletions
diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h
new file mode 100644
index 00000000000..e82c642fa53
--- /dev/null
+++ b/include/linux/platform_data/dma-ep93xx.h
@@ -0,0 +1,93 @@
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+
+/*
+ * M2P channels.
+ *
+ * Note that these values are also directly used for setting the PPALLOC
+ * register.
+ */
+#define EP93XX_DMA_I2S1 0
+#define EP93XX_DMA_I2S2 1
+#define EP93XX_DMA_AAC1 2
+#define EP93XX_DMA_AAC2 3
+#define EP93XX_DMA_AAC3 4
+#define EP93XX_DMA_I2S3 5
+#define EP93XX_DMA_UART1 6
+#define EP93XX_DMA_UART2 7
+#define EP93XX_DMA_UART3 8
+#define EP93XX_DMA_IRDA 9
+/* M2M channels */
+#define EP93XX_DMA_SSP 10
+#define EP93XX_DMA_IDE 11
+
+/**
+ * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine
+ * @port: peripheral which is requesting the channel
+ * @direction: TX/RX channel
+ * @name: optional name for the channel, this is displayed in /proc/interrupts
+ *
+ * This information is passed as private channel parameter in a filter
+ * function. Note that this is only needed for slave/cyclic channels. For
+ * memcpy channels %NULL data should be passed.
+ */
+struct ep93xx_dma_data {
+ int port;
+ enum dma_transfer_direction direction;
+ const char *name;
+};
+
+/**
+ * struct ep93xx_dma_chan_data - platform specific data for a DMA channel
+ * @name: name of the channel, used for getting the right clock for the channel
+ * @base: mapped registers
+ * @irq: interrupt number used by this channel
+ */
+struct ep93xx_dma_chan_data {
+ const char *name;
+ void __iomem *base;
+ int irq;
+};
+
+/**
+ * struct ep93xx_dma_platform_data - platform data for the dmaengine driver
+ * @channels: array of channels which are passed to the driver
+ * @num_channels: number of channels in the array
+ *
+ * This structure is passed to the DMA engine driver via platform data. For
+ * M2P channels, contract is that even channels are for TX and odd for RX.
+ * There is no requirement for the M2M channels.
+ */
+struct ep93xx_dma_platform_data {
+ struct ep93xx_dma_chan_data *channels;
+ size_t num_channels;
+};
+
+static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
+{
+ return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p");
+}
+
+/**
+ * ep93xx_dma_chan_direction - returns direction the channel can be used
+ * @chan: channel
+ *
+ * This function can be used in filter functions to find out whether the
+ * channel supports given DMA direction. Only M2P channels have such
+ * limitation, for M2M channels the direction is configurable.
+ */
+static inline enum dma_transfer_direction
+ep93xx_dma_chan_direction(struct dma_chan *chan)
+{
+ if (!ep93xx_dma_chan_is_m2p(chan))
+ return DMA_NONE;
+
+ /* even channels are for TX, odd for RX */
+ return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
+}
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h
new file mode 100644
index 00000000000..1e2f4e97f42
--- /dev/null
+++ b/include/linux/platform_data/keypad-ep93xx.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
+ */
+
+#ifndef __ASM_ARCH_EP93XX_KEYPAD_H
+#define __ASM_ARCH_EP93XX_KEYPAD_H
+
+struct matrix_keymap_data;
+
+/* flags for the ep93xx_keypad driver */
+#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */
+#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */
+#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */
+#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */
+#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */
+#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */
+
+/**
+ * struct ep93xx_keypad_platform_data - platform specific device structure
+ * @keymap_data: pointer to &matrix_keymap_data
+ * @debounce: debounce start count; terminal count is 0xff
+ * @prescale: row/column counter pre-scaler load value
+ * @flags: see above
+ */
+struct ep93xx_keypad_platform_data {
+ struct matrix_keymap_data *keymap_data;
+ unsigned int debounce;
+ unsigned int prescale;
+ unsigned int flags;
+};
+
+#define EP93XX_MATRIX_ROWS (8)
+#define EP93XX_MATRIX_COLS (8)
+
+#endif /* __ASM_ARCH_EP93XX_KEYPAD_H */
diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h
new file mode 100644
index 00000000000..9bb63ac13f0
--- /dev/null
+++ b/include/linux/platform_data/spi-ep93xx.h
@@ -0,0 +1,29 @@
+#ifndef __ASM_MACH_EP93XX_SPI_H
+#define __ASM_MACH_EP93XX_SPI_H
+
+struct spi_device;
+
+/**
+ * struct ep93xx_spi_info - EP93xx specific SPI descriptor
+ * @num_chipselect: number of chip selects on this board, must be
+ * at least one
+ * @use_dma: use DMA for the transfers
+ */
+struct ep93xx_spi_info {
+ int num_chipselect;
+ bool use_dma;
+};
+
+/**
+ * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device
+ * @setup: setup the chip select mechanism
+ * @cleanup: cleanup the chip select mechanism
+ * @cs_control: control the device chip select
+ */
+struct ep93xx_spi_chip_ops {
+ int (*setup)(struct spi_device *spi);
+ void (*cleanup)(struct spi_device *spi);
+ void (*cs_control)(struct spi_device *spi, int value);
+};
+
+#endif /* __ASM_MACH_EP93XX_SPI_H */
diff --git a/include/linux/platform_data/video-ep93xx.h b/include/linux/platform_data/video-ep93xx.h
new file mode 100644
index 00000000000..d5ae11d7c45
--- /dev/null
+++ b/include/linux/platform_data/video-ep93xx.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/fb.h
+ */
+
+#ifndef __ASM_ARCH_EP93XXFB_H
+#define __ASM_ARCH_EP93XXFB_H
+
+struct platform_device;
+struct fb_videomode;
+struct fb_info;
+
+#define EP93XXFB_USE_MODEDB 0
+
+/* VideoAttributes flags */
+#define EP93XXFB_STATE_MACHINE_ENABLE (1 << 0)
+#define EP93XXFB_PIXEL_CLOCK_ENABLE (1 << 1)
+#define EP93XXFB_VSYNC_ENABLE (1 << 2)
+#define EP93XXFB_PIXEL_DATA_ENABLE (1 << 3)
+#define EP93XXFB_COMPOSITE_SYNC (1 << 4)
+#define EP93XXFB_SYNC_VERT_HIGH (1 << 5)
+#define EP93XXFB_SYNC_HORIZ_HIGH (1 << 6)
+#define EP93XXFB_SYNC_BLANK_HIGH (1 << 7)
+#define EP93XXFB_PCLK_FALLING (1 << 8)
+#define EP93XXFB_ENABLE_AC (1 << 9)
+#define EP93XXFB_ENABLE_LCD (1 << 10)
+#define EP93XXFB_ENABLE_CCIR (1 << 12)
+#define EP93XXFB_USE_PARALLEL_INTERFACE (1 << 13)
+#define EP93XXFB_ENABLE_INTERRUPT (1 << 14)
+#define EP93XXFB_USB_INTERLACE (1 << 16)
+#define EP93XXFB_USE_EQUALIZATION (1 << 17)
+#define EP93XXFB_USE_DOUBLE_HORZ (1 << 18)
+#define EP93XXFB_USE_DOUBLE_VERT (1 << 19)
+#define EP93XXFB_USE_BLANK_PIXEL (1 << 20)
+#define EP93XXFB_USE_SDCSN0 (0 << 21)
+#define EP93XXFB_USE_SDCSN1 (1 << 21)
+#define EP93XXFB_USE_SDCSN2 (2 << 21)
+#define EP93XXFB_USE_SDCSN3 (3 << 21)
+
+#define EP93XXFB_ENABLE (EP93XXFB_STATE_MACHINE_ENABLE | \
+ EP93XXFB_PIXEL_CLOCK_ENABLE | \
+ EP93XXFB_VSYNC_ENABLE | \
+ EP93XXFB_PIXEL_DATA_ENABLE)
+
+struct ep93xxfb_mach_info {
+ unsigned int num_modes;
+ const struct fb_videomode *modes;
+ const struct fb_videomode *default_mode;
+ int bpp;
+ unsigned int flags;
+
+ int (*setup)(struct platform_device *pdev);
+ void (*teardown)(struct platform_device *pdev);
+ void (*blank)(int blank_mode, struct fb_info *info);
+};
+
+#endif /* __ASM_ARCH_EP93XXFB_H */