diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/platform_data/dwc3-omap.h | 47 | ||||
| -rw-r--r-- | include/linux/platform_data/mv_usb.h | 50 | ||||
| -rw-r--r-- | include/linux/sched.h | 3 | ||||
| -rw-r--r-- | include/linux/usb.h | 20 | ||||
| -rw-r--r-- | include/linux/usb/ch9.h | 29 | ||||
| -rw-r--r-- | include/linux/usb/gadget.h | 4 | ||||
| -rw-r--r-- | include/linux/usb/hcd.h | 3 | ||||
| -rw-r--r-- | include/linux/usb/r8a66597.h | 60 | ||||
| -rw-r--r-- | include/linux/usb/renesas_usbhs.h | 14 |
9 files changed, 225 insertions, 5 deletions
diff --git a/include/linux/platform_data/dwc3-omap.h b/include/linux/platform_data/dwc3-omap.h new file mode 100644 index 00000000000..ada401244e0 --- /dev/null +++ b/include/linux/platform_data/dwc3-omap.h @@ -0,0 +1,47 @@ +/** + * dwc3-omap.h - OMAP Specific Glue layer, header. + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Author: Felipe Balbi <balbi@ti.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +enum dwc3_omap_utmi_mode { + DWC3_OMAP_UTMI_MODE_UNKNOWN = 0, + DWC3_OMAP_UTMI_MODE_HW, + DWC3_OMAP_UTMI_MODE_SW, +}; + +struct dwc3_omap_data { + enum dwc3_omap_utmi_mode utmi_mode; +}; diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h new file mode 100644 index 00000000000..e9d9149ddf3 --- /dev/null +++ b/include/linux/platform_data/mv_usb.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MV_PLATFORM_USB_H +#define __MV_PLATFORM_USB_H + +enum pxa_ehci_type { + EHCI_UNDEFINED = 0, + PXA_U2OEHCI, /* pxa 168, 9xx */ + PXA_SPH, /* pxa 168, 9xx SPH */ + MMP3_HSIC, /* mmp3 hsic */ + MMP3_FSIC, /* mmp3 fsic */ +}; + +enum { + MV_USB_MODE_OTG, + MV_USB_MODE_HOST, +}; + +enum { + VBUS_LOW = 0, + VBUS_HIGH = 1 << 0, +}; + +struct mv_usb_addon_irq { + unsigned int irq; + int (*poll)(void); +}; + +struct mv_usb_platform_data { + unsigned int clknum; + char **clkname; + struct mv_usb_addon_irq *id; /* Only valid for OTG. ID pin change*/ + struct mv_usb_addon_irq *vbus; /* valid for OTG/UDC. VBUS change*/ + + /* only valid for HCD. OTG or Host only*/ + unsigned int mode; + + int (*phy_init)(unsigned int regbase); + void (*phy_deinit)(unsigned int regbase); + int (*set_vbus)(unsigned int vbus); +}; + +#endif diff --git a/include/linux/sched.h b/include/linux/sched.h index 41d0237fd44..600eb0a6f89 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2165,7 +2165,8 @@ extern int force_sigsegv(int, struct task_struct *); extern int force_sig_info(int, struct siginfo *, struct task_struct *); extern int __kill_pgrp_info(int sig, struct siginfo *info, struct pid *pgrp); extern int kill_pid_info(int sig, struct siginfo *info, struct pid *pid); -extern int kill_pid_info_as_uid(int, struct siginfo *, struct pid *, uid_t, uid_t, u32); +extern int kill_pid_info_as_cred(int, struct siginfo *, struct pid *, + const struct cred *, u32); extern int kill_pgrp(struct pid *pid, int sig, int priv); extern int kill_pid(struct pid *pid, int sig, int priv); extern int kill_proc_info(int, struct siginfo *, pid_t); diff --git a/include/linux/usb.h b/include/linux/usb.h index 73c7df48960..6f49a1b39fa 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -292,6 +292,16 @@ struct usb_host_config { int extralen; }; +/* USB2.0 and USB3.0 device BOS descriptor set */ +struct usb_host_bos { + struct usb_bos_descriptor *desc; + + /* wireless cap descriptor is handled by wusb */ + struct usb_ext_cap_descriptor *ext_cap; + struct usb_ss_cap_descriptor *ss_cap; + struct usb_ss_container_id_descriptor *ss_id; +}; + int __usb_get_extra_descriptor(char *buffer, unsigned size, unsigned char type, void **ptr); #define usb_get_extra_descriptor(ifpoint, type, ptr) \ @@ -381,6 +391,7 @@ struct usb_tt; * @ep0: endpoint 0 data (default control pipe) * @dev: generic device interface * @descriptor: USB device descriptor + * @bos: USB device BOS descriptor set * @config: all of the device's configs * @actconfig: the active configuration * @ep_in: array of IN endpoints @@ -399,6 +410,9 @@ struct usb_tt; * FIXME -- complete doc * @authenticated: Crypto authentication passed * @wusb: device is Wireless USB + * @lpm_capable: device supports LPM + * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM + * @usb2_hw_lpm_enabled: USB2 hardware LPM enabled * @string_langid: language ID for strings * @product: iProduct string, if present (static) * @manufacturer: iManufacturer string, if present (static) @@ -442,6 +456,7 @@ struct usb_device { struct device dev; struct usb_device_descriptor descriptor; + struct usb_host_bos *bos; struct usb_host_config *config; struct usb_host_config *actconfig; @@ -460,6 +475,9 @@ struct usb_device { unsigned authorized:1; unsigned authenticated:1; unsigned wusb:1; + unsigned lpm_capable:1; + unsigned usb2_hw_lpm_capable:1; + unsigned usb2_hw_lpm_enabled:1; int string_langid; /* static strings from the device */ @@ -1574,7 +1592,7 @@ usb_maxpacket(struct usb_device *udev, int pipe, int is_out) return 0; /* NOTE: only 0x07ff bits are for packet size... */ - return le16_to_cpu(ep->desc.wMaxPacketSize); + return usb_endpoint_maxp(&ep->desc); } /* ----------------------------------------------------------------------- */ diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 0fd3fbdd828..f32a64e57f9 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -34,6 +34,7 @@ #define __LINUX_USB_CH9_H #include <linux/types.h> /* __u8 etc */ +#include <asm/byteorder.h> /* le16_to_cpu */ /*-------------------------------------------------------------------------*/ @@ -143,6 +144,11 @@ #define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ #define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 +/* + * Suspend Options, Table 9-7 USB 3.0 spec + */ +#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) +#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ @@ -570,6 +576,17 @@ static inline int usb_endpoint_is_isoc_out( return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); } +/** + * usb_endpoint_maxp - get endpoint's max packet size + * @epd: endpoint to be checked + * + * Returns @epd's max packet + */ +static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) +{ + return le16_to_cpu(epd->wMaxPacketSize); +} + /*-------------------------------------------------------------------------*/ /* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ @@ -851,6 +868,18 @@ enum usb_device_speed { USB_SPEED_SUPER, /* usb 3.0 */ }; +#ifdef __KERNEL__ + +/** + * usb_speed_string() - Returns human readable-name of the speed. + * @speed: The speed to return human-readable name for. If it's not + * any of the speeds defined in usb_device_speed enum, string for + * USB_SPEED_UNKNOWN will be returned. + */ +extern const char *usb_speed_string(enum usb_device_speed speed); + +#endif + enum usb_device_state { /* NOTATTACHED isn't in the USB spec, and this state acts * the same as ATTACHED ... but it's clearer this way. diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 087f4b93183..1d3a67523ff 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -437,9 +437,9 @@ static inline void usb_ep_fifo_flush(struct usb_ep *ep) struct usb_dcd_config_params { __u8 bU1devExitLat; /* U1 Device exit Latency */ -#define USB_DEFULT_U1_DEV_EXIT_LAT 0x01 /* Less then 1 microsec */ +#define USB_DEFAULT_U1_DEV_EXIT_LAT 0x01 /* Less then 1 microsec */ __le16 bU2DevExitLat; /* U2 Device exit Latency */ -#define USB_DEFULT_U2_DEV_EXIT_LAT 0x1F4 /* Less then 500 microsec */ +#define USB_DEFAULT_U2_DEV_EXIT_LAT 0x1F4 /* Less then 500 microsec */ }; diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 0097136ba45..03354d557b7 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -178,7 +178,7 @@ struct usb_hcd { * this structure. */ unsigned long hcd_priv[0] - __attribute__ ((aligned(sizeof(unsigned long)))); + __attribute__ ((aligned(sizeof(s64)))); }; /* 2.4 does this a bit differently ... */ @@ -343,6 +343,7 @@ struct hc_driver { * address is set */ int (*update_device)(struct usb_hcd *, struct usb_device *); + int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int); }; extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h index b6b8660d0c6..55805f9dcf2 100644 --- a/include/linux/usb/r8a66597.h +++ b/include/linux/usb/r8a66597.h @@ -48,6 +48,9 @@ struct r8a66597_platdata { /* (external controller only) set one = WR0_N shorted to WR1_N */ unsigned wr0_shorted_to_wr1:1; + + /* set one = using SUDMAC */ + unsigned sudmac:1; }; /* Register definitions */ @@ -417,5 +420,62 @@ struct r8a66597_platdata { #define USBSPD 0x00C0 #define RTPORT 0x0001 +/* SUDMAC registers */ +#define CH0CFG 0x00 +#define CH1CFG 0x04 +#define CH0BA 0x10 +#define CH1BA 0x14 +#define CH0BBC 0x18 +#define CH1BBC 0x1C +#define CH0CA 0x20 +#define CH1CA 0x24 +#define CH0CBC 0x28 +#define CH1CBC 0x2C +#define CH0DEN 0x30 +#define CH1DEN 0x34 +#define DSTSCLR 0x38 +#define DBUFCTRL 0x3C +#define DINTCTRL 0x40 +#define DINTSTS 0x44 +#define DINTSTSCLR 0x48 +#define CH0SHCTRL 0x50 +#define CH1SHCTRL 0x54 + +/* SUDMAC Configuration Registers */ +#define SENDBUFM 0x1000 /* b12: Transmit Buffer Mode */ +#define RCVENDM 0x0100 /* b8: Receive Data Transfer End Mode */ +#define LBA_WAIT 0x0030 /* b5-4: Local Bus Access Wait */ + +/* DMA Enable Registers */ +#define DEN 0x0001 /* b1: DMA Transfer Enable */ + +/* DMA Status Clear Register */ +#define CH1STCLR 0x0002 /* b2: Ch1 DMA Status Clear */ +#define CH0STCLR 0x0001 /* b1: Ch0 DMA Status Clear */ + +/* DMA Buffer Control Register */ +#define CH1BUFW 0x0200 /* b9: Ch1 DMA Buffer Data Transfer Enable */ +#define CH0BUFW 0x0100 /* b8: Ch0 DMA Buffer Data Transfer Enable */ +#define CH1BUFS 0x0002 /* b2: Ch1 DMA Buffer Data Status */ +#define CH0BUFS 0x0001 /* b1: Ch0 DMA Buffer Data Status */ + +/* DMA Interrupt Control Register */ +#define CH1ERRE 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Enable */ +#define CH0ERRE 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Enable */ +#define CH1ENDE 0x0002 /* b2: Ch1 DMA Transfer End Int Enable */ +#define CH0ENDE 0x0001 /* b1: Ch0 DMA Transfer End Int Enable */ + +/* DMA Interrupt Status Register */ +#define CH1ERRS 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Status */ +#define CH0ERRS 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Status */ +#define CH1ENDS 0x0002 /* b2: Ch1 DMA Transfer End Int Status */ +#define CH0ENDS 0x0001 /* b1: Ch0 DMA Transfer End Int Status */ + +/* DMA Interrupt Status Clear Register */ +#define CH1ERRC 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Stat Clear */ +#define CH0ERRC 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Stat Clear */ +#define CH1ENDC 0x0002 /* b2: Ch1 DMA Transfer End Int Stat Clear */ +#define CH0ENDC 0x0001 /* b1: Ch0 DMA Transfer End Int Stat Clear */ + #endif /* __LINUX_USB_R8A66597_H */ diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index 8977431259c..e5a40c31854 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -82,6 +82,13 @@ struct renesas_usbhs_platform_callback { * get VBUS status function. */ int (*get_vbus)(struct platform_device *pdev); + + /* + * option: + * + * VBUS control is needed for Host + */ + int (*set_vbus)(struct platform_device *pdev, int enable); }; /* @@ -101,6 +108,8 @@ struct renesas_usbhs_driver_param { * option: * * for BUSWAIT :: BWAIT + * see + * renesas_usbhs/common.c :: usbhsc_set_buswait() * */ int buswait_bwait; @@ -127,6 +136,11 @@ struct renesas_usbhs_driver_param { * pio <--> dma border. */ int pio_dma_border; /* default is 64byte */ + + /* + * option: + */ + u32 has_otg:1; /* for controlling PWEN/EXTLP */ }; /* |