diff options
Diffstat (limited to 'init')
| -rw-r--r-- | init/Kconfig | 116 | ||||
| -rw-r--r-- | init/do_mounts_initrd.c | 4 | ||||
| -rw-r--r-- | init/initramfs.c | 12 | ||||
| -rw-r--r-- | init/main.c | 36 |
4 files changed, 84 insertions, 84 deletions
diff --git a/init/Kconfig b/init/Kconfig index d95ca7cd5d4..089a230e565 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -396,6 +396,22 @@ config RCU_FANOUT_EXACT Say N if unsure. +config RCU_FAST_NO_HZ + bool "Accelerate last non-dyntick-idle CPU's grace periods" + depends on TREE_RCU && NO_HZ && SMP + default n + help + This option causes RCU to attempt to accelerate grace periods + in order to allow the final CPU to enter dynticks-idle state + more quickly. On the other hand, this option increases the + overhead of the dynticks-idle checking, particularly on systems + with large numbers of CPUs. + + Say Y if energy efficiency is critically important, particularly + if you have relatively few CPUs. + + Say N if you are unsure. + config TREE_RCU_TRACE def_bool RCU_TRACE && ( TREE_RCU || TREE_PREEMPT_RCU ) select DEBUG_FS @@ -445,57 +461,6 @@ config LOG_BUF_SHIFT config HAVE_UNSTABLE_SCHED_CLOCK bool -config GROUP_SCHED - bool "Group CPU scheduler" - depends on EXPERIMENTAL - default n - help - This feature lets CPU scheduler recognize task groups and control CPU - bandwidth allocation to such task groups. - In order to create a group from arbitrary set of processes, use - CONFIG_CGROUPS. (See Control Group support.) - -config FAIR_GROUP_SCHED - bool "Group scheduling for SCHED_OTHER" - depends on GROUP_SCHED - default GROUP_SCHED - -config RT_GROUP_SCHED - bool "Group scheduling for SCHED_RR/FIFO" - depends on EXPERIMENTAL - depends on GROUP_SCHED - default n - help - This feature lets you explicitly allocate real CPU bandwidth - to users or control groups (depending on the "Basis for grouping tasks" - setting below. If enabled, it will also make it impossible to - schedule realtime tasks for non-root users until you allocate - realtime bandwidth for them. - See Documentation/scheduler/sched-rt-group.txt for more information. - -choice - depends on GROUP_SCHED - prompt "Basis for grouping tasks" - default USER_SCHED - -config USER_SCHED - bool "user id" - help - This option will choose userid as the basis for grouping - tasks, thus providing equal CPU bandwidth to each user. - -config CGROUP_SCHED - bool "Control groups" - depends on CGROUPS - help - This option allows you to create arbitrary task groups - using the "cgroup" pseudo filesystem and control - the cpu bandwidth allocated to each such task group. - Refer to Documentation/cgroups/cgroups.txt for more - information on "cgroup" pseudo filesystem. - -endchoice - menuconfig CGROUPS boolean "Control Group support" help @@ -616,6 +581,36 @@ config CGROUP_MEM_RES_CTLR_SWAP Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page size is 4096bytes, 512k per 1Gbytes of swap. +menuconfig CGROUP_SCHED + bool "Group CPU scheduler" + depends on EXPERIMENTAL && CGROUPS + default n + help + This feature lets CPU scheduler recognize task groups and control CPU + bandwidth allocation to such task groups. It uses cgroups to group + tasks. + +if CGROUP_SCHED +config FAIR_GROUP_SCHED + bool "Group scheduling for SCHED_OTHER" + depends on CGROUP_SCHED + default CGROUP_SCHED + +config RT_GROUP_SCHED + bool "Group scheduling for SCHED_RR/FIFO" + depends on EXPERIMENTAL + depends on CGROUP_SCHED + default n + help + This feature lets you explicitly allocate real CPU bandwidth + to users or control groups (depending on the "Basis for grouping tasks" + setting below. If enabled, it will also make it impossible to + schedule realtime tasks for non-root users until you allocate + realtime bandwidth for them. + See Documentation/scheduler/sched-rt-group.txt for more information. + +endif #CGROUP_SCHED + endif # CGROUPS config MM_OWNER @@ -976,19 +971,6 @@ config PERF_EVENTS Say Y if unsure. -config EVENT_PROFILE - bool "Tracepoint profiling sources" - depends on PERF_EVENTS && EVENT_TRACING - default y - help - Allow the use of tracepoints as software performance events. - - When this is enabled, you can create perf events based on - tracepoints using PERF_TYPE_TRACEPOINT and the tracepoint ID - found in debugfs://tracing/events/*/*/id. (The -e/--events - option to the perf tool can parse and interpret symbolic - tracepoints, in the subsystem:tracepoint_name format.) - config PERF_COUNTERS bool "Kernel performance counters (old config option)" depends on HAVE_PERF_EVENTS @@ -1112,7 +1094,7 @@ config MMAP_ALLOW_UNINITIALIZED See Documentation/nommu-mmap.txt for more information. config PROFILING - bool "Profiling support (EXPERIMENTAL)" + bool "Profiling support" help Say Y here to enable the extended profiling support mechanisms used by profilers such as OProfile. @@ -1262,4 +1244,8 @@ source "block/Kconfig" config PREEMPT_NOTIFIERS bool +config PADATA + depends on SMP + bool + source "kernel/Kconfig.locks" diff --git a/init/do_mounts_initrd.c b/init/do_mounts_initrd.c index 614241b5200..2b108538d0d 100644 --- a/init/do_mounts_initrd.c +++ b/init/do_mounts_initrd.c @@ -30,11 +30,7 @@ static int __init do_linuxrc(void * shell) extern char * envp_init[]; sys_close(old_fd);sys_close(root_fd); - sys_close(0);sys_close(1);sys_close(2); sys_setsid(); - (void) sys_open("/dev/console",O_RDWR,0); - (void) sys_dup(0); - (void) sys_dup(0); return kernel_execve(shell, argv, envp_init); } diff --git a/init/initramfs.c b/init/initramfs.c index b37d34beb90..37d3859b1b3 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -525,7 +525,7 @@ static void __init clean_rootfs(void) int fd; void *buf; struct linux_dirent64 *dirp; - int count; + int num; fd = sys_open("/", O_RDONLY, 0); WARN_ON(fd < 0); @@ -539,9 +539,9 @@ static void __init clean_rootfs(void) } dirp = buf; - count = sys_getdents64(fd, dirp, BUF_SIZE); - while (count > 0) { - while (count > 0) { + num = sys_getdents64(fd, dirp, BUF_SIZE); + while (num > 0) { + while (num > 0) { struct stat st; int ret; @@ -554,12 +554,12 @@ static void __init clean_rootfs(void) sys_unlink(dirp->d_name); } - count -= dirp->d_reclen; + num -= dirp->d_reclen; dirp = (void *)dirp + dirp->d_reclen; } dirp = buf; memset(buf, 0, BUF_SIZE); - count = sys_getdents64(fd, dirp, BUF_SIZE); + num = sys_getdents64(fd, dirp, BUF_SIZE); } sys_close(fd); diff --git a/init/main.c b/init/main.c index dac44a9356a..a1ab78ceb4b 100644 --- a/init/main.c +++ b/init/main.c @@ -149,6 +149,20 @@ static int __init nosmp(char *str) early_param("nosmp", nosmp); +/* this is hard limit */ +static int __init nrcpus(char *str) +{ + int nr_cpus; + + get_option(&str, &nr_cpus); + if (nr_cpus > 0 && nr_cpus < nr_cpu_ids) + nr_cpu_ids = nr_cpus; + + return 0; +} + +early_param("nr_cpus", nrcpus); + static int __init maxcpus(char *str) { get_option(&str, &setup_max_cpus); @@ -160,7 +174,7 @@ static int __init maxcpus(char *str) early_param("maxcpus", maxcpus); #else -const unsigned int setup_max_cpus = NR_CPUS; +static const unsigned int setup_max_cpus = NR_CPUS; #endif /* @@ -416,7 +430,9 @@ static noinline void __init_refok rest_init(void) kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND); numa_default_policy(); pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES); + rcu_read_lock(); kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns); + rcu_read_unlock(); unlock_kernel(); /* @@ -584,6 +600,7 @@ asmlinkage void __init start_kernel(void) local_irq_disable(); } rcu_init(); + radix_tree_init(); /* init some links before init_ISA_irqs() */ early_irq_init(); init_IRQ(); @@ -601,7 +618,7 @@ asmlinkage void __init start_kernel(void) local_irq_enable(); /* Interrupts are enabled now so all GFP allocations are safe. */ - set_gfp_allowed_mask(__GFP_BITS_MASK); + gfp_allowed_mask = __GFP_BITS_MASK; kmem_cache_init_late(); @@ -659,7 +676,6 @@ asmlinkage void __init start_kernel(void) key_init(); security_init(); vfs_caches_init(totalram_pages); - radix_tree_init(); signals_init(); /* rootfs populating might need page-writeback */ page_writeback_init(); @@ -806,11 +822,6 @@ static noinline int init_post(void) system_state = SYSTEM_RUNNING; numa_default_policy(); - if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0) - printk(KERN_WARNING "Warning: unable to open an initial console.\n"); - - (void) sys_dup(0); - (void) sys_dup(0); current->signal->flags |= SIGNAL_UNKILLABLE; @@ -836,7 +847,8 @@ static noinline int init_post(void) run_init_process("/bin/init"); run_init_process("/bin/sh"); - panic("No init found. Try passing init= option to kernel."); + panic("No init found. Try passing init= option to kernel. " + "See Linux Documentation/init.txt for guidance."); } static int __init kernel_init(void * unused) @@ -873,6 +885,12 @@ static int __init kernel_init(void * unused) do_basic_setup(); + /* Open the /dev/console on the rootfs, this should never fail */ + if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0) + printk(KERN_WARNING "Warning: unable to open an initial console.\n"); + + (void) sys_dup(0); + (void) sys_dup(0); /* * check if there is an early userspace init. If yes, let it do all * the work |