1 files changed, 85 insertions, 10 deletions

diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index b8e4dce80a7..cdec83e722f 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -672,13 +672,14 @@ static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
 			 */
 			BUG_ON(timer->function(timer) != HRTIMER_NORESTART);
 			return 1;
-		case HRTIMER_CB_IRQSAFE_NO_SOFTIRQ:
+		case HRTIMER_CB_IRQSAFE_PERCPU:
+		case HRTIMER_CB_IRQSAFE_UNLOCKED:
 			/*
 			 * This is solely for the sched tick emulation with
 			 * dynamic tick support to ensure that we do not
 			 * restart the tick right on the edge and end up with
 			 * the tick timer in the softirq ! The calling site
-			 * takes care of this.
+			 * takes care of this. Also used for hrtimer sleeper !
 			 */
 			debug_hrtimer_deactivate(timer);
 			return 1;
@@ -1245,7 +1246,8 @@ static void __run_hrtimer(struct hrtimer *timer)
 	timer_stats_account_hrtimer(timer);
 
 	fn = timer->function;
-	if (timer->cb_mode == HRTIMER_CB_IRQSAFE_NO_SOFTIRQ) {
+	if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU ||
+	    timer->cb_mode == HRTIMER_CB_IRQSAFE_UNLOCKED) {
 		/*
 		 * Used for scheduler timers, avoid lock inversion with
 		 * rq->lock and tasklist_lock.
@@ -1452,7 +1454,7 @@ void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, struct task_struct *task)
 	sl->timer.function = hrtimer_wakeup;
 	sl->task = task;
 #ifdef CONFIG_HIGH_RES_TIMERS
-	sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+	sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED;
 #endif
 }
 
@@ -1591,29 +1593,95 @@ static void __cpuinit init_hrtimers_cpu(int cpu)
 
 #ifdef CONFIG_HOTPLUG_CPU
 
-static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
-				struct hrtimer_clock_base *new_base)
+static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
+				struct hrtimer_clock_base *new_base, int dcpu)
 {
 	struct hrtimer *timer;
 	struct rb_node *node;
+	int raise = 0;
 
 	while ((node = rb_first(&old_base->active))) {
 		timer = rb_entry(node, struct hrtimer, node);
 		BUG_ON(hrtimer_callback_running(timer));
 		debug_hrtimer_deactivate(timer);
-		__remove_hrtimer(timer, old_base, HRTIMER_STATE_INACTIVE, 0);
+
+		/*
+		 * Should not happen. Per CPU timers should be
+		 * canceled _before_ the migration code is called
+		 */
+		if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU) {
+			__remove_hrtimer(timer, old_base,
+					 HRTIMER_STATE_INACTIVE, 0);
+			WARN(1, "hrtimer (%p %p)active but cpu %d dead\n",
+			     timer, timer->function, dcpu);
+			continue;
+		}
+
+		/*
+		 * Mark it as STATE_MIGRATE not INACTIVE otherwise the
+		 * timer could be seen as !active and just vanish away
+		 * under us on another CPU
+		 */
+		__remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0);
 		timer->base = new_base;
 		/*
 		 * Enqueue the timer. Allow reprogramming of the event device
 		 */
 		enqueue_hrtimer(timer, new_base, 1);
+
+#ifdef CONFIG_HIGH_RES_TIMERS
+		/*
+		 * Happens with high res enabled when the timer was
+		 * already expired and the callback mode is
+		 * HRTIMER_CB_IRQSAFE_UNLOCKED (hrtimer_sleeper). The
+		 * enqueue code does not move them to the soft irq
+		 * pending list for performance/latency reasons, but
+		 * in the migration state, we need to do that
+		 * otherwise we end up with a stale timer.
+		 */
+		if (timer->state == HRTIMER_STATE_MIGRATE) {
+			timer->state = HRTIMER_STATE_PENDING;
+			list_add_tail(&timer->cb_entry,
+				      &new_base->cpu_base->cb_pending);
+			raise = 1;
+		}
+#endif
+		/* Clear the migration state bit */
+		timer->state &= ~HRTIMER_STATE_MIGRATE;
+	}
+	return raise;
+}
+
+#ifdef CONFIG_HIGH_RES_TIMERS
+static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base,
+				   struct hrtimer_cpu_base *new_base)
+{
+	struct hrtimer *timer;
+	int raise = 0;
+
+	while (!list_empty(&old_base->cb_pending)) {
+		timer = list_entry(old_base->cb_pending.next,
+				   struct hrtimer, cb_entry);
+
+		__remove_hrtimer(timer, timer->base, HRTIMER_STATE_PENDING, 0);
+		timer->base = &new_base->clock_base[timer->base->index];
+		list_add_tail(&timer->cb_entry, &new_base->cb_pending);
+		raise = 1;
 	}
+	return raise;
+}
+#else
+static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base,
+				   struct hrtimer_cpu_base *new_base)
+{
+	return 0;
 }
+#endif
 
 static void migrate_hrtimers(int cpu)
 {
 	struct hrtimer_cpu_base *old_base, *new_base;
-	int i;
+	int i, raise = 0;
 
 	BUG_ON(cpu_online(cpu));
 	old_base = &per_cpu(hrtimer_bases, cpu);
@@ -1626,14 +1694,21 @@ static void migrate_hrtimers(int cpu)
 	spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
 
 	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
-		migrate_hrtimer_list(&old_base->clock_base[i],
-				     &new_base->clock_base[i]);
+		if (migrate_hrtimer_list(&old_base->clock_base[i],
+					 &new_base->clock_base[i], cpu))
+			raise = 1;
 	}
 
+	if (migrate_hrtimer_pending(old_base, new_base))
+		raise = 1;
+
 	spin_unlock(&old_base->lock);
 	spin_unlock(&new_base->lock);
 	local_irq_enable();
 	put_cpu_var(hrtimer_bases);
+
+	if (raise)
+		hrtimer_raise_softirq();
 }
 #endif /* CONFIG_HOTPLUG_CPU */