diff options
Diffstat (limited to 'net/bluetooth/hci_event.c')
-rw-r--r-- | net/bluetooth/hci_event.c | 311 |
1 files changed, 248 insertions, 63 deletions
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 682f33a3836..21e5913d12e 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -991,10 +991,25 @@ static void hci_cc_le_set_adv_enable(struct hci_dev *hdev, struct sk_buff *skb) if (!sent) return; + if (status) + return; + hci_dev_lock(hdev); - if (!status) - mgmt_advertising(hdev, *sent); + /* If we're doing connection initation as peripheral. Set a + * timeout in case something goes wrong. + */ + if (*sent) { + struct hci_conn *conn; + + conn = hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT); + if (conn) + queue_delayed_work(hdev->workqueue, + &conn->le_conn_timeout, + HCI_LE_CONN_TIMEOUT); + } + + mgmt_advertising(hdev, *sent); hci_dev_unlock(hdev); } @@ -1018,6 +1033,33 @@ static void hci_cc_le_set_scan_param(struct hci_dev *hdev, struct sk_buff *skb) hci_dev_unlock(hdev); } +static bool has_pending_adv_report(struct hci_dev *hdev) +{ + struct discovery_state *d = &hdev->discovery; + + return bacmp(&d->last_adv_addr, BDADDR_ANY); +} + +static void clear_pending_adv_report(struct hci_dev *hdev) +{ + struct discovery_state *d = &hdev->discovery; + + bacpy(&d->last_adv_addr, BDADDR_ANY); + d->last_adv_data_len = 0; +} + +static void store_pending_adv_report(struct hci_dev *hdev, bdaddr_t *bdaddr, + u8 bdaddr_type, s8 rssi, u8 *data, u8 len) +{ + struct discovery_state *d = &hdev->discovery; + + bacpy(&d->last_adv_addr, bdaddr); + d->last_adv_addr_type = bdaddr_type; + d->last_adv_rssi = rssi; + memcpy(d->last_adv_data, data, len); + d->last_adv_data_len = len; +} + static void hci_cc_le_set_scan_enable(struct hci_dev *hdev, struct sk_buff *skb) { @@ -1036,9 +1078,25 @@ static void hci_cc_le_set_scan_enable(struct hci_dev *hdev, switch (cp->enable) { case LE_SCAN_ENABLE: set_bit(HCI_LE_SCAN, &hdev->dev_flags); + if (hdev->le_scan_type == LE_SCAN_ACTIVE) + clear_pending_adv_report(hdev); break; case LE_SCAN_DISABLE: + /* We do this here instead of when setting DISCOVERY_STOPPED + * since the latter would potentially require waiting for + * inquiry to stop too. + */ + if (has_pending_adv_report(hdev)) { + struct discovery_state *d = &hdev->discovery; + + mgmt_device_found(hdev, &d->last_adv_addr, LE_LINK, + d->last_adv_addr_type, NULL, + d->last_adv_rssi, 0, 1, + d->last_adv_data, + d->last_adv_data_len, NULL, 0); + } + /* Cancel this timer so that we don't try to disable scanning * when it's already disabled. */ @@ -1187,6 +1245,59 @@ static void hci_cc_write_remote_amp_assoc(struct hci_dev *hdev, amp_write_rem_assoc_continue(hdev, rp->phy_handle); } +static void hci_cc_read_rssi(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct hci_rp_read_rssi *rp = (void *) skb->data; + struct hci_conn *conn; + + BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); + + if (rp->status) + return; + + hci_dev_lock(hdev); + + conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle)); + if (conn) + conn->rssi = rp->rssi; + + hci_dev_unlock(hdev); +} + +static void hci_cc_read_tx_power(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct hci_cp_read_tx_power *sent; + struct hci_rp_read_tx_power *rp = (void *) skb->data; + struct hci_conn *conn; + + BT_DBG("%s status 0x%2.2x", hdev->name, rp->status); + + if (rp->status) + return; + + sent = hci_sent_cmd_data(hdev, HCI_OP_READ_TX_POWER); + if (!sent) + return; + + hci_dev_lock(hdev); + + conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle)); + if (!conn) + goto unlock; + + switch (sent->type) { + case 0x00: + conn->tx_power = rp->tx_power; + break; + case 0x01: + conn->max_tx_power = rp->tx_power; + break; + } + +unlock: + hci_dev_unlock(hdev); +} + static void hci_cs_inquiry(struct hci_dev *hdev, __u8 status) { BT_DBG("%s status 0x%2.2x", hdev->name, status); @@ -1342,6 +1453,7 @@ static int hci_outgoing_auth_needed(struct hci_dev *hdev, * is requested. */ if (!hci_conn_ssp_enabled(conn) && !(conn->auth_type & 0x01) && + conn->pending_sec_level != BT_SECURITY_FIPS && conn->pending_sec_level != BT_SECURITY_HIGH && conn->pending_sec_level != BT_SECURITY_MEDIUM) return 0; @@ -1827,7 +1939,7 @@ static void hci_inquiry_result_evt(struct hci_dev *hdev, struct sk_buff *skb) name_known = hci_inquiry_cache_update(hdev, &data, false, &ssp); mgmt_device_found(hdev, &info->bdaddr, ACL_LINK, 0x00, info->dev_class, 0, !name_known, ssp, NULL, - 0); + 0, NULL, 0); } hci_dev_unlock(hdev); @@ -2579,6 +2691,14 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) hci_cc_write_remote_amp_assoc(hdev, skb); break; + case HCI_OP_READ_RSSI: + hci_cc_read_rssi(hdev, skb); + break; + + case HCI_OP_READ_TX_POWER: + hci_cc_read_tx_power(hdev, skb); + break; + default: BT_DBG("%s opcode 0x%4.4x", hdev->name, opcode); break; @@ -2957,7 +3077,8 @@ static void hci_link_key_request_evt(struct hci_dev *hdev, struct sk_buff *skb) } if (key->type == HCI_LK_COMBINATION && key->pin_len < 16 && - conn->pending_sec_level == BT_SECURITY_HIGH) { + (conn->pending_sec_level == BT_SECURITY_HIGH || + conn->pending_sec_level == BT_SECURITY_FIPS)) { BT_DBG("%s ignoring key unauthenticated for high security", hdev->name); goto not_found; @@ -3102,7 +3223,7 @@ static void hci_inquiry_result_with_rssi_evt(struct hci_dev *hdev, false, &ssp); mgmt_device_found(hdev, &info->bdaddr, ACL_LINK, 0x00, info->dev_class, info->rssi, - !name_known, ssp, NULL, 0); + !name_known, ssp, NULL, 0, NULL, 0); } } else { struct inquiry_info_with_rssi *info = (void *) (skb->data + 1); @@ -3120,7 +3241,7 @@ static void hci_inquiry_result_with_rssi_evt(struct hci_dev *hdev, false, &ssp); mgmt_device_found(hdev, &info->bdaddr, ACL_LINK, 0x00, info->dev_class, info->rssi, - !name_known, ssp, NULL, 0); + !name_known, ssp, NULL, 0, NULL, 0); } } @@ -3309,7 +3430,7 @@ static void hci_extended_inquiry_result_evt(struct hci_dev *hdev, eir_len = eir_get_length(info->data, sizeof(info->data)); mgmt_device_found(hdev, &info->bdaddr, ACL_LINK, 0x00, info->dev_class, info->rssi, !name_known, - ssp, info->data, eir_len); + ssp, info->data, eir_len, NULL, 0); } hci_dev_unlock(hdev); @@ -3367,24 +3488,20 @@ unlock: static u8 hci_get_auth_req(struct hci_conn *conn) { - /* If remote requests dedicated bonding follow that lead */ - if (conn->remote_auth == HCI_AT_DEDICATED_BONDING || - conn->remote_auth == HCI_AT_DEDICATED_BONDING_MITM) { - /* If both remote and local IO capabilities allow MITM - * protection then require it, otherwise don't */ - if (conn->remote_cap == HCI_IO_NO_INPUT_OUTPUT || - conn->io_capability == HCI_IO_NO_INPUT_OUTPUT) - return HCI_AT_DEDICATED_BONDING; - else - return HCI_AT_DEDICATED_BONDING_MITM; - } - /* If remote requests no-bonding follow that lead */ if (conn->remote_auth == HCI_AT_NO_BONDING || conn->remote_auth == HCI_AT_NO_BONDING_MITM) return conn->remote_auth | (conn->auth_type & 0x01); - return conn->auth_type; + /* If both remote and local have enough IO capabilities, require + * MITM protection + */ + if (conn->remote_cap != HCI_IO_NO_INPUT_OUTPUT && + conn->io_capability != HCI_IO_NO_INPUT_OUTPUT) + return conn->remote_auth | 0x01; + + /* No MITM protection possible so ignore remote requirement */ + return (conn->remote_auth & ~0x01) | (conn->auth_type & 0x01); } static void hci_io_capa_request_evt(struct hci_dev *hdev, struct sk_buff *skb) @@ -3414,8 +3531,21 @@ static void hci_io_capa_request_evt(struct hci_dev *hdev, struct sk_buff *skb) * to DisplayYesNo as it is not supported by BT spec. */ cp.capability = (conn->io_capability == 0x04) ? HCI_IO_DISPLAY_YESNO : conn->io_capability; - conn->auth_type = hci_get_auth_req(conn); - cp.authentication = conn->auth_type; + + /* If we are initiators, there is no remote information yet */ + if (conn->remote_auth == 0xff) { + cp.authentication = conn->auth_type; + + /* Request MITM protection if our IO caps allow it + * except for the no-bonding case + */ + if (conn->io_capability != HCI_IO_NO_INPUT_OUTPUT && + cp.authentication != HCI_AT_NO_BONDING) + cp.authentication |= 0x01; + } else { + conn->auth_type = hci_get_auth_req(conn); + cp.authentication = conn->auth_type; + } if (hci_find_remote_oob_data(hdev, &conn->dst) && (conn->out || test_bit(HCI_CONN_REMOTE_OOB, &conn->flags))) @@ -3483,12 +3613,9 @@ static void hci_user_confirm_request_evt(struct hci_dev *hdev, rem_mitm = (conn->remote_auth & 0x01); /* If we require MITM but the remote device can't provide that - * (it has NoInputNoOutput) then reject the confirmation - * request. The only exception is when we're dedicated bonding - * initiators (connect_cfm_cb set) since then we always have the MITM - * bit set. */ - if (!conn->connect_cfm_cb && loc_mitm && - conn->remote_cap == HCI_IO_NO_INPUT_OUTPUT) { + * (it has NoInputNoOutput) then reject the confirmation request + */ + if (loc_mitm && conn->remote_cap == HCI_IO_NO_INPUT_OUTPUT) { BT_DBG("Rejecting request: remote device can't provide MITM"); hci_send_cmd(hdev, HCI_OP_USER_CONFIRM_NEG_REPLY, sizeof(ev->bdaddr), &ev->bdaddr); @@ -3846,17 +3973,6 @@ static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) conn->dst_type = ev->bdaddr_type; - /* The advertising parameters for own address type - * define which source address and source address - * type this connections has. - */ - if (bacmp(&conn->src, BDADDR_ANY)) { - conn->src_type = ADDR_LE_DEV_PUBLIC; - } else { - bacpy(&conn->src, &hdev->static_addr); - conn->src_type = ADDR_LE_DEV_RANDOM; - } - if (ev->role == LE_CONN_ROLE_MASTER) { conn->out = true; conn->link_mode |= HCI_LM_MASTER; @@ -3881,27 +3997,24 @@ static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) &conn->init_addr, &conn->init_addr_type); } - } else { - /* Set the responder (our side) address type based on - * the advertising address type. - */ - conn->resp_addr_type = hdev->adv_addr_type; - if (hdev->adv_addr_type == ADDR_LE_DEV_RANDOM) - bacpy(&conn->resp_addr, &hdev->random_addr); - else - bacpy(&conn->resp_addr, &hdev->bdaddr); - - conn->init_addr_type = ev->bdaddr_type; - bacpy(&conn->init_addr, &ev->bdaddr); } } else { cancel_delayed_work(&conn->le_conn_timeout); } - /* Ensure that the hci_conn contains the identity address type - * regardless of which address the connection was made with. - */ - hci_copy_identity_address(hdev, &conn->src, &conn->src_type); + if (!conn->out) { + /* Set the responder (our side) address type based on + * the advertising address type. + */ + conn->resp_addr_type = hdev->adv_addr_type; + if (hdev->adv_addr_type == ADDR_LE_DEV_RANDOM) + bacpy(&conn->resp_addr, &hdev->random_addr); + else + bacpy(&conn->resp_addr, &hdev->bdaddr); + + conn->init_addr_type = ev->bdaddr_type; + bacpy(&conn->init_addr, &ev->bdaddr); + } /* Lookup the identity address from the stored connection * address and address type. @@ -3981,25 +4094,97 @@ static void check_pending_le_conn(struct hci_dev *hdev, bdaddr_t *addr, } } +static void process_adv_report(struct hci_dev *hdev, u8 type, bdaddr_t *bdaddr, + u8 bdaddr_type, s8 rssi, u8 *data, u8 len) +{ + struct discovery_state *d = &hdev->discovery; + bool match; + + /* Passive scanning shouldn't trigger any device found events */ + if (hdev->le_scan_type == LE_SCAN_PASSIVE) { + if (type == LE_ADV_IND || type == LE_ADV_DIRECT_IND) + check_pending_le_conn(hdev, bdaddr, bdaddr_type); + return; + } + + /* If there's nothing pending either store the data from this + * event or send an immediate device found event if the data + * should not be stored for later. + */ + if (!has_pending_adv_report(hdev)) { + /* If the report will trigger a SCAN_REQ store it for + * later merging. + */ + if (type == LE_ADV_IND || type == LE_ADV_SCAN_IND) { + store_pending_adv_report(hdev, bdaddr, bdaddr_type, + rssi, data, len); + return; + } + + mgmt_device_found(hdev, bdaddr, LE_LINK, bdaddr_type, NULL, + rssi, 0, 1, data, len, NULL, 0); + return; + } + + /* Check if the pending report is for the same device as the new one */ + match = (!bacmp(bdaddr, &d->last_adv_addr) && + bdaddr_type == d->last_adv_addr_type); + + /* If the pending data doesn't match this report or this isn't a + * scan response (e.g. we got a duplicate ADV_IND) then force + * sending of the pending data. + */ + if (type != LE_ADV_SCAN_RSP || !match) { + /* Send out whatever is in the cache, but skip duplicates */ + if (!match) + mgmt_device_found(hdev, &d->last_adv_addr, LE_LINK, + d->last_adv_addr_type, NULL, + d->last_adv_rssi, 0, 1, + d->last_adv_data, + d->last_adv_data_len, NULL, 0); + + /* If the new report will trigger a SCAN_REQ store it for + * later merging. + */ + if (type == LE_ADV_IND || type == LE_ADV_SCAN_IND) { + store_pending_adv_report(hdev, bdaddr, bdaddr_type, + rssi, data, len); + return; + } + + /* The advertising reports cannot be merged, so clear + * the pending report and send out a device found event. + */ + clear_pending_adv_report(hdev); + mgmt_device_found(hdev, bdaddr, LE_LINK, bdaddr_type, NULL, + rssi, 0, 1, data, len, NULL, 0); + return; + } + + /* If we get here we've got a pending ADV_IND or ADV_SCAN_IND and + * the new event is a SCAN_RSP. We can therefore proceed with + * sending a merged device found event. + */ + mgmt_device_found(hdev, &d->last_adv_addr, LE_LINK, + d->last_adv_addr_type, NULL, rssi, 0, 1, data, len, + d->last_adv_data, d->last_adv_data_len); + clear_pending_adv_report(hdev); +} + static void hci_le_adv_report_evt(struct hci_dev *hdev, struct sk_buff *skb) { u8 num_reports = skb->data[0]; void *ptr = &skb->data[1]; - s8 rssi; hci_dev_lock(hdev); while (num_reports--) { struct hci_ev_le_advertising_info *ev = ptr; - - if (ev->evt_type == LE_ADV_IND || - ev->evt_type == LE_ADV_DIRECT_IND) - check_pending_le_conn(hdev, &ev->bdaddr, - ev->bdaddr_type); + s8 rssi; rssi = ev->data[ev->length]; - mgmt_device_found(hdev, &ev->bdaddr, LE_LINK, ev->bdaddr_type, - NULL, rssi, 0, 1, ev->data, ev->length); + process_adv_report(hdev, ev->evt_type, &ev->bdaddr, + ev->bdaddr_type, rssi, ev->data, ev->length); ptr += sizeof(*ev) + ev->length + 1; } |