diff options
Diffstat (limited to 'net/dccp/feat.c')
| -rw-r--r-- | net/dccp/feat.c | 202 |
1 files changed, 197 insertions, 5 deletions
diff --git a/net/dccp/feat.c b/net/dccp/feat.c index 568def95272..23cea0ee310 100644 --- a/net/dccp/feat.c +++ b/net/dccp/feat.c @@ -12,6 +12,7 @@ * ----------- * o Feature negotiation is coordinated with connection setup (as in TCP), wild * changes of parameters of an established connection are not supported. + * o Changing non-negotiable (NN) values is supported in state OPEN/PARTOPEN. * o All currently known SP features have 1-byte quantities. If in the future * extensions of RFCs 4340..42 define features with item lengths larger than * one byte, a feature-specific extension of the code will be required. @@ -343,6 +344,20 @@ static int __dccp_feat_activate(struct sock *sk, const int idx, return dccp_feat_table[idx].activation_hdlr(sk, val, rx); } +/** + * dccp_feat_activate - Activate feature value on socket + * @sk: fully connected DCCP socket (after handshake is complete) + * @feat_num: feature to activate, one of %dccp_feature_numbers + * @local: whether local (1) or remote (0) @feat_num is meant + * @fval: the value (SP or NN) to activate, or NULL to use the default value + * For general use this function is preferable over __dccp_feat_activate(). + */ +static int dccp_feat_activate(struct sock *sk, u8 feat_num, bool local, + dccp_feat_val const *fval) +{ + return __dccp_feat_activate(sk, dccp_feat_index(feat_num), local, fval); +} + /* Test for "Req'd" feature (RFC 4340, 6.4) */ static inline int dccp_feat_must_be_understood(u8 feat_num) { @@ -650,11 +665,22 @@ int dccp_feat_insert_opts(struct dccp_sock *dp, struct dccp_request_sock *dreq, return -1; if (pos->needs_mandatory && dccp_insert_option_mandatory(skb)) return -1; - /* - * Enter CHANGING after transmitting the Change option (6.6.2). - */ - if (pos->state == FEAT_INITIALISING) - pos->state = FEAT_CHANGING; + + if (skb->sk->sk_state == DCCP_OPEN && + (opt == DCCPO_CONFIRM_R || opt == DCCPO_CONFIRM_L)) { + /* + * Confirms don't get retransmitted (6.6.3) once the + * connection is in state OPEN + */ + dccp_feat_list_pop(pos); + } else { + /* + * Enter CHANGING after transmitting the Change + * option (6.6.2). + */ + if (pos->state == FEAT_INITIALISING) + pos->state = FEAT_CHANGING; + } } return 0; } @@ -730,6 +756,70 @@ int dccp_feat_register_sp(struct sock *sk, u8 feat, u8 is_local, 0, list, len); } +/** + * dccp_feat_nn_get - Query current/pending value of NN feature + * @sk: DCCP socket of an established connection + * @feat: NN feature number from %dccp_feature_numbers + * For a known NN feature, returns value currently being negotiated, or + * current (confirmed) value if no negotiation is going on. + */ +u64 dccp_feat_nn_get(struct sock *sk, u8 feat) +{ + if (dccp_feat_type(feat) == FEAT_NN) { + struct dccp_sock *dp = dccp_sk(sk); + struct dccp_feat_entry *entry; + + entry = dccp_feat_list_lookup(&dp->dccps_featneg, feat, 1); + if (entry != NULL) + return entry->val.nn; + + switch (feat) { + case DCCPF_ACK_RATIO: + return dp->dccps_l_ack_ratio; + case DCCPF_SEQUENCE_WINDOW: + return dp->dccps_l_seq_win; + } + } + DCCP_BUG("attempt to look up unsupported feature %u", feat); + return 0; +} +EXPORT_SYMBOL_GPL(dccp_feat_nn_get); + +/** + * dccp_feat_signal_nn_change - Update NN values for an established connection + * @sk: DCCP socket of an established connection + * @feat: NN feature number from %dccp_feature_numbers + * @nn_val: the new value to use + * This function is used to communicate NN updates out-of-band. + */ +int dccp_feat_signal_nn_change(struct sock *sk, u8 feat, u64 nn_val) +{ + struct list_head *fn = &dccp_sk(sk)->dccps_featneg; + dccp_feat_val fval = { .nn = nn_val }; + struct dccp_feat_entry *entry; + + if (sk->sk_state != DCCP_OPEN && sk->sk_state != DCCP_PARTOPEN) + return 0; + + if (dccp_feat_type(feat) != FEAT_NN || + !dccp_feat_is_valid_nn_val(feat, nn_val)) + return -EINVAL; + + if (nn_val == dccp_feat_nn_get(sk, feat)) + return 0; /* already set or negotiation under way */ + + entry = dccp_feat_list_lookup(fn, feat, 1); + if (entry != NULL) { + dccp_pr_debug("Clobbering existing NN entry %llu -> %llu\n", + (unsigned long long)entry->val.nn, + (unsigned long long)nn_val); + dccp_feat_list_pop(entry); + } + + inet_csk_schedule_ack(sk); + return dccp_feat_push_change(fn, feat, 1, 0, &fval); +} +EXPORT_SYMBOL_GPL(dccp_feat_signal_nn_change); /* * Tracking features whose value depend on the choice of CCID @@ -1187,6 +1277,100 @@ confirmation_failed: } /** + * dccp_feat_handle_nn_established - Fast-path reception of NN options + * @sk: socket of an established DCCP connection + * @mandatory: whether @opt was preceded by a Mandatory option + * @opt: %DCCPO_CHANGE_L | %DCCPO_CONFIRM_R (NN only) + * @feat: NN number, one of %dccp_feature_numbers + * @val: NN value + * @len: length of @val in bytes + * This function combines the functionality of change_recv/confirm_recv, with + * the following differences (reset codes are the same): + * - cleanup after receiving the Confirm; + * - values are directly activated after successful parsing; + * - deliberately restricted to NN features. + * The restriction to NN features is essential since SP features can have non- + * predictable outcomes (depending on the remote configuration), and are inter- + * dependent (CCIDs for instance cause further dependencies). + */ +static u8 dccp_feat_handle_nn_established(struct sock *sk, u8 mandatory, u8 opt, + u8 feat, u8 *val, u8 len) +{ + struct list_head *fn = &dccp_sk(sk)->dccps_featneg; + const bool local = (opt == DCCPO_CONFIRM_R); + struct dccp_feat_entry *entry; + u8 type = dccp_feat_type(feat); + dccp_feat_val fval; + + dccp_feat_print_opt(opt, feat, val, len, mandatory); + + /* Ignore non-mandatory unknown and non-NN features */ + if (type == FEAT_UNKNOWN) { + if (local && !mandatory) + return 0; + goto fast_path_unknown; + } else if (type != FEAT_NN) { + return 0; + } + + /* + * We don't accept empty Confirms, since in fast-path feature + * negotiation the values are enabled immediately after sending + * the Change option. + * Empty Changes on the other hand are invalid (RFC 4340, 6.1). + */ + if (len == 0 || len > sizeof(fval.nn)) + goto fast_path_unknown; + + if (opt == DCCPO_CHANGE_L) { + fval.nn = dccp_decode_value_var(val, len); + if (!dccp_feat_is_valid_nn_val(feat, fval.nn)) + goto fast_path_unknown; + + if (dccp_feat_push_confirm(fn, feat, local, &fval) || + dccp_feat_activate(sk, feat, local, &fval)) + return DCCP_RESET_CODE_TOO_BUSY; + + /* set the `Ack Pending' flag to piggyback a Confirm */ + inet_csk_schedule_ack(sk); + + } else if (opt == DCCPO_CONFIRM_R) { + entry = dccp_feat_list_lookup(fn, feat, local); + if (entry == NULL || entry->state != FEAT_CHANGING) + return 0; + + fval.nn = dccp_decode_value_var(val, len); + /* + * Just ignore a value that doesn't match our current value. + * If the option changes twice within two RTTs, then at least + * one CONFIRM will be received for the old value after a + * new CHANGE was sent. + */ + if (fval.nn != entry->val.nn) + return 0; + + /* Only activate after receiving the Confirm option (6.6.1). */ + dccp_feat_activate(sk, feat, local, &fval); + + /* It has been confirmed - so remove the entry */ + dccp_feat_list_pop(entry); + + } else { + DCCP_WARN("Received illegal option %u\n", opt); + goto fast_path_failed; + } + return 0; + +fast_path_unknown: + if (!mandatory) + return dccp_push_empty_confirm(fn, feat, local); + +fast_path_failed: + return mandatory ? DCCP_RESET_CODE_MANDATORY_ERROR + : DCCP_RESET_CODE_OPTION_ERROR; +} + +/** * dccp_feat_parse_options - Process Feature-Negotiation Options * @sk: for general use and used by the client during connection setup * @dreq: used by the server during connection setup @@ -1221,6 +1405,14 @@ int dccp_feat_parse_options(struct sock *sk, struct dccp_request_sock *dreq, return dccp_feat_confirm_recv(fn, mandatory, opt, feat, val, len, server); } + break; + /* + * Support for exchanging NN options on an established connection. + */ + case DCCP_OPEN: + case DCCP_PARTOPEN: + return dccp_feat_handle_nn_established(sk, mandatory, opt, feat, + val, len); } return 0; /* ignore FN options in all other states */ } |