diff options
Diffstat (limited to 'net/dsa/mv88e6131.c')
| -rw-r--r-- | net/dsa/mv88e6131.c | 22 |
1 files changed, 14 insertions, 8 deletions
diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c index 70fae2444cb..002995721ec 100644 --- a/net/dsa/mv88e6131.c +++ b/net/dsa/mv88e6131.c @@ -1,6 +1,6 @@ /* - * net/dsa/mv88e6131.c - Marvell 88e6131 switch chip support - * Copyright (c) 2008 Marvell Semiconductor + * net/dsa/mv88e6131.c - Marvell 88e6095/6095f/6131 switch chip support + * Copyright (c) 2008-2009 Marvell Semiconductor * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,6 +21,8 @@ static char *mv88e6131_probe(struct mii_bus *bus, int sw_addr) ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03); if (ret >= 0) { ret &= 0xfff0; + if (ret == 0x0950) + return "Marvell 88E6095/88E6095F"; if (ret == 0x1060) return "Marvell 88E6131"; } @@ -36,7 +38,7 @@ static int mv88e6131_switch_reset(struct dsa_switch *ds) /* * Set all ports to the disabled state. */ - for (i = 0; i < 8; i++) { + for (i = 0; i < 11; i++) { ret = REG_READ(REG_PORT(i), 0x04); REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc); } @@ -136,7 +138,7 @@ static int mv88e6131_setup_global(struct dsa_switch *ds) * Clear all trunk masks. */ for (i = 0; i < 8; i++) - REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff); + REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7ff); /* * Clear all trunk mappings. @@ -159,9 +161,13 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) /* * MAC Forcing register: don't force link, speed, duplex - * or flow control state to any particular values. + * or flow control state to any particular values on physical + * ports, but force the CPU port to 1000 Mb/s full duplex. */ - REG_WRITE(addr, 0x01, 0x0003); + if (p == ds->cpu_port) + REG_WRITE(addr, 0x01, 0x003e); + else + REG_WRITE(addr, 0x01, 0x0003); /* * Port Control: disable Core Tag, disable Drop-on-Lock, @@ -268,7 +274,7 @@ static int mv88e6131_setup(struct dsa_switch *ds) if (ret < 0) return ret; - for (i = 0; i < 6; i++) { + for (i = 0; i < 11; i++) { ret = mv88e6131_setup_port(ds, i); if (ret < 0) return ret; @@ -279,7 +285,7 @@ static int mv88e6131_setup(struct dsa_switch *ds) static int mv88e6131_port_to_phy_addr(int port) { - if (port >= 0 && port != 3 && port <= 7) + if (port >= 0 && port <= 11) return port; return -1; } |