diff options
Diffstat (limited to 'net/ipv4/Kconfig')
| -rw-r--r-- | net/ipv4/Kconfig | 411 |
1 files changed, 411 insertions, 0 deletions
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig new file mode 100644 index 00000000000..6d3e8b1bd1f --- /dev/null +++ b/net/ipv4/Kconfig @@ -0,0 +1,411 @@ +# +# IP configuration +# +config IP_MULTICAST + bool "IP: multicasting" + depends on INET + help + This is code for addressing several networked computers at once, + enlarging your kernel by about 2 KB. You need multicasting if you + intend to participate in the MBONE, a high bandwidth network on top + of the Internet which carries audio and video broadcasts. More + information about the MBONE is on the WWW at + <http://www-itg.lbl.gov/mbone/>. Information about the multicast + capabilities of the various network cards is contained in + <file:Documentation/networking/multicast.txt>. For most people, it's + safe to say N. + +config IP_ADVANCED_ROUTER + bool "IP: advanced router" + depends on INET + ---help--- + If you intend to run your Linux box mostly as a router, i.e. as a + computer that forwards and redistributes network packets, say Y; you + will then be presented with several options that allow more precise + control about the routing process. + + The answer to this question won't directly affect the kernel: + answering N will just cause the configurator to skip all the + questions about advanced routing. + + Note that your box can only act as a router if you enable IP + forwarding in your kernel; you can do that by saying Y to "/proc + file system support" and "Sysctl support" below and executing the + line + + echo "1" > /proc/sys/net/ipv4/ip_forward + + at boot time after the /proc file system has been mounted. + + If you turn on IP forwarding, you will also get the rp_filter, which + automatically rejects incoming packets if the routing table entry + for their source address doesn't match the network interface they're + arriving on. This has security advantages because it prevents the + so-called IP spoofing, however it can pose problems if you use + asymmetric routing (packets from you to a host take a different path + than packets from that host to you) or if you operate a non-routing + host which has several IP addresses on different interfaces. To turn + rp_filter off use: + + echo 0 > /proc/sys/net/ipv4/conf/<device>/rp_filter + or + echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter + + If unsure, say N here. + +config IP_MULTIPLE_TABLES + bool "IP: policy routing" + depends on IP_ADVANCED_ROUTER + ---help--- + Normally, a router decides what to do with a received packet based + solely on the packet's final destination address. If you say Y here, + the Linux router will also be able to take the packet's source + address into account. Furthermore, the TOS (Type-Of-Service) field + of the packet can be used for routing decisions as well. + + If you are interested in this, please see the preliminary + documentation at <http://www.compendium.com.ar/policy-routing.txt> + and <ftp://post.tepkom.ru/pub/vol2/Linux/docs/advanced-routing.tex>. + You will need supporting software from + <ftp://ftp.tux.org/pub/net/ip-routing/>. + + If unsure, say N. + +config IP_ROUTE_FWMARK + bool "IP: use netfilter MARK value as routing key" + depends on IP_MULTIPLE_TABLES && NETFILTER + help + If you say Y here, you will be able to specify different routes for + packets with different mark values (see iptables(8), MARK target). + +config IP_ROUTE_MULTIPATH + bool "IP: equal cost multipath" + depends on IP_ADVANCED_ROUTER + help + Normally, the routing tables specify a single action to be taken in + a deterministic manner for a given packet. If you say Y here + however, it becomes possible to attach several actions to a packet + pattern, in effect specifying several alternative paths to travel + for those packets. The router considers all these paths to be of + equal "cost" and chooses one of them in a non-deterministic fashion + if a matching packet arrives. + +config IP_ROUTE_MULTIPATH_CACHED + bool "IP: equal cost multipath with caching support (EXPERIMENTAL)" + depends on: IP_ROUTE_MULTIPATH + help + Normally, equal cost multipath routing is not supported by the + routing cache. If you say Y here, alternative routes are cached + and on cache lookup a route is chosen in a configurable fashion. + + If unsure, say N. + +config IP_ROUTE_MULTIPATH_RR + tristate "MULTIPATH: round robin algorithm" + depends on IP_ROUTE_MULTIPATH_CACHED + help + Mulitpath routes are chosen according to Round Robin + +config IP_ROUTE_MULTIPATH_RANDOM + tristate "MULTIPATH: random algorithm" + depends on IP_ROUTE_MULTIPATH_CACHED + help + Multipath routes are chosen in a random fashion. Actually, + there is no weight for a route. The advantage of this policy + is that it is implemented stateless and therefore introduces only + a very small delay. + +config IP_ROUTE_MULTIPATH_WRANDOM + tristate "MULTIPATH: weighted random algorithm" + depends on IP_ROUTE_MULTIPATH_CACHED + help + Multipath routes are chosen in a weighted random fashion. + The per route weights are the weights visible via ip route 2. As the + corresponding state management introduces some overhead routing delay + is increased. + +config IP_ROUTE_MULTIPATH_DRR + tristate "MULTIPATH: interface round robin algorithm" + depends on IP_ROUTE_MULTIPATH_CACHED + help + Connections are distributed in a round robin fashion over the + available interfaces. This policy makes sense if the connections + should be primarily distributed on interfaces and not on routes. + +config IP_ROUTE_VERBOSE + bool "IP: verbose route monitoring" + depends on IP_ADVANCED_ROUTER + help + If you say Y here, which is recommended, then the kernel will print + verbose messages regarding the routing, for example warnings about + received packets which look strange and could be evidence of an + attack or a misconfigured system somewhere. The information is + handled by the klogd daemon which is responsible for kernel messages + ("man klogd"). + +config IP_PNP + bool "IP: kernel level autoconfiguration" + depends on INET + help + This enables automatic configuration of IP addresses of devices and + of the routing table during kernel boot, based on either information + supplied on the kernel command line or by BOOTP or RARP protocols. + You need to say Y only for diskless machines requiring network + access to boot (in which case you want to say Y to "Root file system + on NFS" as well), because all other machines configure the network + in their startup scripts. + +config IP_PNP_DHCP + bool "IP: DHCP support" + depends on IP_PNP + ---help--- + If you want your Linux box to mount its whole root file system (the + one containing the directory /) from some other computer over the + net via NFS and you want the IP address of your computer to be + discovered automatically at boot time using the DHCP protocol (a + special protocol designed for doing this job), say Y here. In case + the boot ROM of your network card was designed for booting Linux and + does DHCP itself, providing all necessary information on the kernel + command line, you can say N here. + + If unsure, say Y. Note that if you want to use DHCP, a DHCP server + must be operating on your network. Read + <file:Documentation/nfsroot.txt> for details. + +config IP_PNP_BOOTP + bool "IP: BOOTP support" + depends on IP_PNP + ---help--- + If you want your Linux box to mount its whole root file system (the + one containing the directory /) from some other computer over the + net via NFS and you want the IP address of your computer to be + discovered automatically at boot time using the BOOTP protocol (a + special protocol designed for doing this job), say Y here. In case + the boot ROM of your network card was designed for booting Linux and + does BOOTP itself, providing all necessary information on the kernel + command line, you can say N here. If unsure, say Y. Note that if you + want to use BOOTP, a BOOTP server must be operating on your network. + Read <file:Documentation/nfsroot.txt> for details. + +config IP_PNP_RARP + bool "IP: RARP support" + depends on IP_PNP + help + If you want your Linux box to mount its whole root file system (the + one containing the directory /) from some other computer over the + net via NFS and you want the IP address of your computer to be + discovered automatically at boot time using the RARP protocol (an + older protocol which is being obsoleted by BOOTP and DHCP), say Y + here. Note that if you want to use RARP, a RARP server must be + operating on your network. Read <file:Documentation/nfsroot.txt> for + details. + +# not yet ready.. +# bool ' IP: ARP support' CONFIG_IP_PNP_ARP +config NET_IPIP + tristate "IP: tunneling" + depends on INET + select INET_TUNNEL + ---help--- + Tunneling means encapsulating data of one protocol type within + another protocol and sending it over a channel that understands the + encapsulating protocol. This particular tunneling driver implements + encapsulation of IP within IP, which sounds kind of pointless, but + can be useful if you want to make your (or some other) machine + appear on a different network than it physically is, or to use + mobile-IP facilities (allowing laptops to seamlessly move between + networks without changing their IP addresses). + + Saying Y to this option will produce two modules ( = code which can + be inserted in and removed from the running kernel whenever you + want). Most people won't need this and can say N. + +config NET_IPGRE + tristate "IP: GRE tunnels over IP" + depends on INET + select XFRM + help + Tunneling means encapsulating data of one protocol type within + another protocol and sending it over a channel that understands the + encapsulating protocol. This particular tunneling driver implements + GRE (Generic Routing Encapsulation) and at this time allows + encapsulating of IPv4 or IPv6 over existing IPv4 infrastructure. + This driver is useful if the other endpoint is a Cisco router: Cisco + likes GRE much better than the other Linux tunneling driver ("IP + tunneling" above). In addition, GRE allows multicast redistribution + through the tunnel. + +config NET_IPGRE_BROADCAST + bool "IP: broadcast GRE over IP" + depends on IP_MULTICAST && NET_IPGRE + help + One application of GRE/IP is to construct a broadcast WAN (Wide Area + Network), which looks like a normal Ethernet LAN (Local Area + Network), but can be distributed all over the Internet. If you want + to do that, say Y here and to "IP multicast routing" below. + +config IP_MROUTE + bool "IP: multicast routing" + depends on IP_MULTICAST + help + This is used if you want your machine to act as a router for IP + packets that have several destination addresses. It is needed on the + MBONE, a high bandwidth network on top of the Internet which carries + audio and video broadcasts. In order to do that, you would most + likely run the program mrouted. Information about the multicast + capabilities of the various network cards is contained in + <file:Documentation/networking/multicast.txt>. If you haven't heard + about it, you don't need it. + +config IP_PIMSM_V1 + bool "IP: PIM-SM version 1 support" + depends on IP_MROUTE + help + Kernel side support for Sparse Mode PIM (Protocol Independent + Multicast) version 1. This multicast routing protocol is used widely + because Cisco supports it. You need special software to use it + (pimd-v1). Please see <http://netweb.usc.edu/pim/> for more + information about PIM. + + Say Y if you want to use PIM-SM v1. Note that you can say N here if + you just want to use Dense Mode PIM. + +config IP_PIMSM_V2 + bool "IP: PIM-SM version 2 support" + depends on IP_MROUTE + help + Kernel side support for Sparse Mode PIM version 2. In order to use + this, you need an experimental routing daemon supporting it (pimd or + gated-5). This routing protocol is not used widely, so say N unless + you want to play with it. + +config ARPD + bool "IP: ARP daemon support (EXPERIMENTAL)" + depends on INET && EXPERIMENTAL + ---help--- + Normally, the kernel maintains an internal cache which maps IP + addresses to hardware addresses on the local network, so that + Ethernet/Token Ring/ etc. frames are sent to the proper address on + the physical networking layer. For small networks having a few + hundred directly connected hosts or less, keeping this address + resolution (ARP) cache inside the kernel works well. However, + maintaining an internal ARP cache does not work well for very large + switched networks, and will use a lot of kernel memory if TCP/IP + connections are made to many machines on the network. + + If you say Y here, the kernel's internal ARP cache will never grow + to more than 256 entries (the oldest entries are expired in a LIFO + manner) and communication will be attempted with the user space ARP + daemon arpd. Arpd then answers the address resolution request either + from its own cache or by asking the net. + + This code is experimental and also obsolete. If you want to use it, + you need to find a version of the daemon arpd on the net somewhere, + and you should also say Y to "Kernel/User network link driver", + below. If unsure, say N. + +config SYN_COOKIES + bool "IP: TCP syncookie support (disabled per default)" + depends on INET + ---help--- + Normal TCP/IP networking is open to an attack known as "SYN + flooding". This denial-of-service attack prevents legitimate remote + users from being able to connect to your computer during an ongoing + attack and requires very little work from the attacker, who can + operate from anywhere on the Internet. + + SYN cookies provide protection against this type of attack. If you + say Y here, the TCP/IP stack will use a cryptographic challenge + protocol known as "SYN cookies" to enable legitimate users to + continue to connect, even when your machine is under attack. There + is no need for the legitimate users to change their TCP/IP software; + SYN cookies work transparently to them. For technical information + about SYN cookies, check out <http://cr.yp.to/syncookies.html>. + + If you are SYN flooded, the source address reported by the kernel is + likely to have been forged by the attacker; it is only reported as + an aid in tracing the packets to their actual source and should not + be taken as absolute truth. + + SYN cookies may prevent correct error reporting on clients when the + server is really overloaded. If this happens frequently better turn + them off. + + If you say Y here, note that SYN cookies aren't enabled by default; + you can enable them by saying Y to "/proc file system support" and + "Sysctl support" below and executing the command + + echo 1 >/proc/sys/net/ipv4/tcp_syncookies + + at boot time after the /proc file system has been mounted. + + If unsure, say N. + +config INET_AH + tristate "IP: AH transformation" + depends on INET + select XFRM + select CRYPTO + select CRYPTO_HMAC + select CRYPTO_MD5 + select CRYPTO_SHA1 + ---help--- + Support for IPsec AH. + + If unsure, say Y. + +config INET_ESP + tristate "IP: ESP transformation" + depends on INET + select XFRM + select CRYPTO + select CRYPTO_HMAC + select CRYPTO_MD5 + select CRYPTO_SHA1 + select CRYPTO_DES + ---help--- + Support for IPsec ESP. + + If unsure, say Y. + +config INET_IPCOMP + tristate "IP: IPComp transformation" + depends on INET + select XFRM + select INET_TUNNEL + select CRYPTO + select CRYPTO_DEFLATE + ---help--- + Support for IP Payload Compression Protocol (IPComp) (RFC3173), + typically needed for IPsec. + + If unsure, say Y. + +config INET_TUNNEL + tristate "IP: tunnel transformation" + depends on INET + select XFRM + ---help--- + Support for generic IP tunnel transformation, which is required by + the IP tunneling module as well as tunnel mode IPComp. + + If unsure, say Y. + +config IP_TCPDIAG + tristate "IP: TCP socket monitoring interface" + depends on INET + default y + ---help--- + Support for TCP socket monitoring interface used by native Linux + tools such as ss. ss is included in iproute2, currently downloadable + at <http://developer.osdl.org/dev/iproute2>. If you want IPv6 support + and have selected IPv6 as a module, you need to build this as a + module too. + + If unsure, say Y. + +config IP_TCPDIAG_IPV6 + def_bool (IP_TCPDIAG=y && IPV6=y) || (IP_TCPDIAG=m && IPV6) + +source "net/ipv4/ipvs/Kconfig" + |