diff options
Diffstat (limited to 'net/mac80211/cfg.c')
-rw-r--r-- | net/mac80211/cfg.c | 285 |
1 files changed, 206 insertions, 79 deletions
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 47e0aca614b..09d96a8f6c2 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -164,7 +164,17 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, sta = sta_info_get(sdata, mac_addr); else sta = sta_info_get_bss(sdata, mac_addr); - if (!sta) { + /* + * The ASSOC test makes sure the driver is ready to + * receive the key. When wpa_supplicant has roamed + * using FT, it attempts to set the key before + * association has completed, this rejects that attempt + * so it will set the key again after assocation. + * + * TODO: accept the key if we have a station entry and + * add it to the device after the station. + */ + if (!sta || !test_sta_flag(sta, WLAN_STA_ASSOC)) { ieee80211_key_free(sdata->local, key); err = -ENOENT; goto out_unlock; @@ -482,7 +492,10 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) #ifdef CONFIG_MAC80211_MESH sinfo->filled |= STATION_INFO_LLID | STATION_INFO_PLID | - STATION_INFO_PLINK_STATE; + STATION_INFO_PLINK_STATE | + STATION_INFO_LOCAL_PM | + STATION_INFO_PEER_PM | + STATION_INFO_NONPEER_PM; sinfo->llid = le16_to_cpu(sta->llid); sinfo->plid = le16_to_cpu(sta->plid); @@ -491,6 +504,9 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) sinfo->filled |= STATION_INFO_T_OFFSET; sinfo->t_offset = sta->t_offset; } + sinfo->local_pm = sta->local_pm; + sinfo->peer_pm = sta->peer_pm; + sinfo->nonpeer_pm = sta->nonpeer_pm; #endif } @@ -510,6 +526,7 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) BIT(NL80211_STA_FLAG_WME) | BIT(NL80211_STA_FLAG_MFP) | BIT(NL80211_STA_FLAG_AUTHENTICATED) | + BIT(NL80211_STA_FLAG_ASSOCIATED) | BIT(NL80211_STA_FLAG_TDLS_PEER); if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHORIZED); @@ -521,6 +538,8 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_MFP); if (test_sta_flag(sta, WLAN_STA_AUTH)) sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHENTICATED); + if (test_sta_flag(sta, WLAN_STA_ASSOC)) + sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_ASSOCIATED); if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER); } @@ -909,11 +928,13 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, /* TODO: make hostapd tell us what it wants */ sdata->smps_mode = IEEE80211_SMPS_OFF; sdata->needed_rx_chains = sdata->local->rx_chains; + sdata->radar_required = params->radar_required; err = ieee80211_vif_use_channel(sdata, ¶ms->chandef, IEEE80211_CHANCTX_SHARED); if (err) return err; + ieee80211_vif_copy_chanctx_to_vlans(sdata, false); /* * Apply control port protocol, this allows us to @@ -930,6 +951,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, sdata->vif.bss_conf.beacon_int = params->beacon_interval; sdata->vif.bss_conf.dtim_period = params->dtim_period; + sdata->vif.bss_conf.enable_beacon = true; sdata->vif.bss_conf.ssid_len = params->ssid_len; if (params->ssid_len) @@ -1010,8 +1032,15 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) kfree_rcu(old_probe_resp, rcu_head); list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) - sta_info_flush(local, vlan); - sta_info_flush(local, sdata); + sta_info_flush_defer(vlan); + sta_info_flush_defer(sdata); + rcu_barrier(); + list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) + sta_info_flush_cleanup(vlan); + sta_info_flush_cleanup(sdata); + + sdata->vif.bss_conf.enable_beacon = false; + clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); drv_stop_ap(sdata->local, sdata); @@ -1020,6 +1049,7 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps.bc_buf); skb_queue_purge(&sdata->u.ap.ps.bc_buf); + ieee80211_vif_copy_chanctx_to_vlans(sdata, true); ieee80211_vif_release_channel(sdata); return 0; @@ -1069,6 +1099,58 @@ static void ieee80211_send_layer2_update(struct sta_info *sta) netif_rx_ni(skb); } +static int sta_apply_auth_flags(struct ieee80211_local *local, + struct sta_info *sta, + u32 mask, u32 set) +{ + int ret; + + if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) && + set & BIT(NL80211_STA_FLAG_AUTHENTICATED) && + !test_sta_flag(sta, WLAN_STA_AUTH)) { + ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); + if (ret) + return ret; + } + + if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) && + set & BIT(NL80211_STA_FLAG_ASSOCIATED) && + !test_sta_flag(sta, WLAN_STA_ASSOC)) { + ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); + if (ret) + return ret; + } + + if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) { + if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) + ret = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); + else if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) + ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); + else + ret = 0; + if (ret) + return ret; + } + + if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) && + !(set & BIT(NL80211_STA_FLAG_ASSOCIATED)) && + test_sta_flag(sta, WLAN_STA_ASSOC)) { + ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); + if (ret) + return ret; + } + + if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) && + !(set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) && + test_sta_flag(sta, WLAN_STA_AUTH)) { + ret = sta_info_move_state(sta, IEEE80211_STA_NONE); + if (ret) + return ret; + } + + return 0; +} + static int sta_apply_parameters(struct ieee80211_local *local, struct sta_info *sta, struct station_parameters *params) @@ -1086,52 +1168,20 @@ static int sta_apply_parameters(struct ieee80211_local *local, mask = params->sta_flags_mask; set = params->sta_flags_set; - /* - * In mesh mode, we can clear AUTHENTICATED flag but must - * also make ASSOCIATED follow appropriately for the driver - * API. See also below, after AUTHORIZED changes. - */ - if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) { - /* cfg80211 should not allow this in non-mesh modes */ - if (WARN_ON(!ieee80211_vif_is_mesh(&sdata->vif))) - return -EINVAL; - - if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED) && - !test_sta_flag(sta, WLAN_STA_AUTH)) { - ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); - if (ret) - return ret; - ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); - if (ret) - return ret; - } - } - - if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) { - if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) - ret = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); - else if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) - ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); - if (ret) - return ret; - } - - if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) { - /* cfg80211 should not allow this in non-mesh modes */ - if (WARN_ON(!ieee80211_vif_is_mesh(&sdata->vif))) - return -EINVAL; - - if (!(set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) && - test_sta_flag(sta, WLAN_STA_AUTH)) { - ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); - if (ret) - return ret; - ret = sta_info_move_state(sta, IEEE80211_STA_NONE); - if (ret) - return ret; - } + if (ieee80211_vif_is_mesh(&sdata->vif)) { + /* + * In mesh mode, ASSOCIATED isn't part of the nl80211 + * API but must follow AUTHENTICATED for driver state. + */ + if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) + mask |= BIT(NL80211_STA_FLAG_ASSOCIATED); + if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) + set |= BIT(NL80211_STA_FLAG_ASSOCIATED); } + ret = sta_apply_auth_flags(local, sta, mask, set); + if (ret) + return ret; if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) { if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) @@ -1177,10 +1227,11 @@ static int sta_apply_parameters(struct ieee80211_local *local, sta->sta.aid = params->aid; /* - * FIXME: updating the following information is racy when this - * function is called from ieee80211_change_station(). - * However, all this information should be static so - * maybe we should just reject attemps to change it. + * Some of the following updates would be racy if called on an + * existing station, via ieee80211_change_station(). However, + * all such changes are rejected by cfg80211 except for updates + * changing the supported rates on an existing but not yet used + * TDLS peer. */ if (params->listen_interval >= 0) @@ -1201,36 +1252,62 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (params->ht_capa) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - params->ht_capa, - &sta->sta.ht_cap); + params->ht_capa, sta); if (params->vht_capa) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, - params->vht_capa, - &sta->sta.vht_cap); + params->vht_capa, sta); if (ieee80211_vif_is_mesh(&sdata->vif)) { #ifdef CONFIG_MAC80211_MESH - if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) + u32 changed = 0; + if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) { switch (params->plink_state) { - case NL80211_PLINK_LISTEN: case NL80211_PLINK_ESTAB: + if (sta->plink_state != NL80211_PLINK_ESTAB) + changed = mesh_plink_inc_estab_count( + sdata); + sta->plink_state = params->plink_state; + + ieee80211_mps_sta_status_update(sta); + changed |= ieee80211_mps_set_sta_local_pm(sta, + sdata->u.mesh.mshcfg.power_mode); + break; + case NL80211_PLINK_LISTEN: case NL80211_PLINK_BLOCKED: + case NL80211_PLINK_OPN_SNT: + case NL80211_PLINK_OPN_RCVD: + case NL80211_PLINK_CNF_RCVD: + case NL80211_PLINK_HOLDING: + if (sta->plink_state == NL80211_PLINK_ESTAB) + changed = mesh_plink_dec_estab_count( + sdata); sta->plink_state = params->plink_state; + + ieee80211_mps_sta_status_update(sta); + changed |= + ieee80211_mps_local_status_update(sdata); break; default: /* nothing */ break; } - else + } else { switch (params->plink_action) { case PLINK_ACTION_OPEN: - mesh_plink_open(sta); + changed |= mesh_plink_open(sta); break; case PLINK_ACTION_BLOCK: - mesh_plink_block(sta); + changed |= mesh_plink_block(sta); break; } + } + + if (params->local_pm) + changed |= + ieee80211_mps_set_sta_local_pm(sta, + params->local_pm); + ieee80211_bss_info_change_notify(sdata, changed); #endif } @@ -1265,6 +1342,10 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, if (!sta) return -ENOMEM; + /* + * defaults -- if userspace wants something else we'll + * change it accordingly in sta_apply_parameters() + */ sta_info_pre_move_state(sta, IEEE80211_STA_AUTH); sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC); @@ -1301,7 +1382,6 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev, u8 *mac) { - struct ieee80211_local *local = wiphy_priv(wiphy); struct ieee80211_sub_if_data *sdata; sdata = IEEE80211_DEV_TO_SUB_IF(dev); @@ -1309,7 +1389,7 @@ static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev, if (mac) return sta_info_destroy_addr_bss(sdata, mac); - sta_info_flush(local, sdata); + sta_info_flush(sdata); return 0; } @@ -1332,9 +1412,11 @@ static int ieee80211_change_station(struct wiphy *wiphy, return -ENOENT; } - /* in station mode, supported rates are only valid with TDLS */ + /* in station mode, some updates are only valid with TDLS */ if (sdata->vif.type == NL80211_IFTYPE_STATION && - params->supported_rates && + (params->supported_rates || params->ht_capa || params->vht_capa || + params->sta_modify_mask || + (params->sta_flags_mask & BIT(NL80211_STA_FLAG_WME))) && !test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { mutex_unlock(&local->sta_mtx); return -EINVAL; @@ -1418,13 +1500,13 @@ static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev, return -ENOENT; } - err = mesh_path_add(dst, sdata); + err = mesh_path_add(sdata, dst); if (err) { rcu_read_unlock(); return err; } - mpath = mesh_path_lookup(dst, sdata); + mpath = mesh_path_lookup(sdata, dst); if (!mpath) { rcu_read_unlock(); return -ENXIO; @@ -1436,12 +1518,12 @@ static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev, } static int ieee80211_del_mpath(struct wiphy *wiphy, struct net_device *dev, - u8 *dst) + u8 *dst) { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); if (dst) - return mesh_path_del(dst, sdata); + return mesh_path_del(sdata, dst); mesh_path_flush_by_iface(sdata); return 0; @@ -1465,7 +1547,7 @@ static int ieee80211_change_mpath(struct wiphy *wiphy, return -ENOENT; } - mpath = mesh_path_lookup(dst, sdata); + mpath = mesh_path_lookup(sdata, dst); if (!mpath) { rcu_read_unlock(); return -ENOENT; @@ -1529,7 +1611,7 @@ static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev, sdata = IEEE80211_DEV_TO_SUB_IF(dev); rcu_read_lock(); - mpath = mesh_path_lookup(dst, sdata); + mpath = mesh_path_lookup(sdata, dst); if (!mpath) { rcu_read_unlock(); return -ENOENT; @@ -1550,7 +1632,7 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev, sdata = IEEE80211_DEV_TO_SUB_IF(dev); rcu_read_lock(); - mpath = mesh_path_lookup_by_idx(idx, sdata); + mpath = mesh_path_lookup_by_idx(sdata, idx); if (!mpath) { rcu_read_unlock(); return -ENOENT; @@ -1615,6 +1697,9 @@ static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh, memcpy(sdata->vif.bss_conf.mcast_rate, setup->mcast_rate, sizeof(setup->mcast_rate)); + sdata->vif.bss_conf.beacon_int = setup->beacon_interval; + sdata->vif.bss_conf.dtim_period = setup->dtim_period; + return 0; } @@ -1713,6 +1798,14 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy, if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, mask)) conf->dot11MeshHWMPconfirmationInterval = nconf->dot11MeshHWMPconfirmationInterval; + if (_chg_mesh_attr(NL80211_MESHCONF_POWER_MODE, mask)) { + conf->power_mode = nconf->power_mode; + ieee80211_mps_local_status_update(sdata); + } + if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask)) + conf->dot11MeshAwakeWindowDuration = + nconf->dot11MeshAwakeWindowDuration; + ieee80211_mbss_info_change_notify(sdata, BSS_CHANGED_BEACON); return 0; } @@ -1738,9 +1831,7 @@ static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev, if (err) return err; - ieee80211_start_mesh(sdata); - - return 0; + return ieee80211_start_mesh(sdata); } static int ieee80211_leave_mesh(struct wiphy *wiphy, struct net_device *dev) @@ -1994,7 +2085,8 @@ static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev, { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); - memcpy(sdata->vif.bss_conf.mcast_rate, rate, sizeof(rate)); + memcpy(sdata->vif.bss_conf.mcast_rate, rate, + sizeof(int) * IEEE80211_NUM_BANDS); return 0; } @@ -2197,7 +2289,8 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - if (sdata->vif.type != NL80211_IFTYPE_STATION) + if (sdata->vif.type != NL80211_IFTYPE_STATION && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT) return -EOPNOTSUPP; if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) @@ -2303,7 +2396,8 @@ static int ieee80211_start_roc_work(struct ieee80211_local *local, INIT_LIST_HEAD(&roc->dependents); /* if there's one pending or we're scanning, queue this one */ - if (!list_empty(&local->roc_list) || local->scanning) + if (!list_empty(&local->roc_list) || + local->scanning || local->radar_detect_enabled) goto out_check_combine; /* if not HW assist, just queue & schedule work */ @@ -2553,6 +2647,37 @@ static int ieee80211_cancel_remain_on_channel(struct wiphy *wiphy, return ieee80211_cancel_roc(local, cookie, false); } +static int ieee80211_start_radar_detection(struct wiphy *wiphy, + struct net_device *dev, + struct cfg80211_chan_def *chandef) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + unsigned long timeout; + int err; + + if (!list_empty(&local->roc_list) || local->scanning) + return -EBUSY; + + /* whatever, but channel contexts should not complain about that one */ + sdata->smps_mode = IEEE80211_SMPS_OFF; + sdata->needed_rx_chains = local->rx_chains; + sdata->radar_required = true; + + mutex_lock(&local->iflist_mtx); + err = ieee80211_vif_use_channel(sdata, chandef, + IEEE80211_CHANCTX_SHARED); + mutex_unlock(&local->iflist_mtx); + if (err) + return err; + + timeout = msecs_to_jiffies(IEEE80211_DFS_MIN_CAC_TIME_MS); + ieee80211_queue_delayed_work(&sdata->local->hw, + &sdata->dfs_cac_timer_work, timeout); + + return 0; +} + static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, struct ieee80211_channel *chan, bool offchan, unsigned int wait, const u8 *buf, size_t len, @@ -2657,7 +2782,8 @@ static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, goto out_unlock; } - IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN; + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN | + IEEE80211_TX_INTFL_OFFCHAN_TX_OK; if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL) IEEE80211_SKB_CB(skb)->hw_queue = local->hw.offchannel_tx_hw_queue; @@ -3257,4 +3383,5 @@ struct cfg80211_ops mac80211_config_ops = { .get_et_stats = ieee80211_get_et_stats, .get_et_strings = ieee80211_get_et_strings, .get_channel = ieee80211_cfg_get_channel, + .start_radar_detection = ieee80211_start_radar_detection, }; |