diff options
Diffstat (limited to 'net/mac80211/mesh_sync.c')
| -rw-r--r-- | net/mac80211/mesh_sync.c | 105 |
1 files changed, 15 insertions, 90 deletions
diff --git a/net/mac80211/mesh_sync.c b/net/mac80211/mesh_sync.c index a16b7b4b1e0..aa8d1e43738 100644 --- a/net/mac80211/mesh_sync.c +++ b/net/mac80211/mesh_sync.c @@ -43,7 +43,7 @@ struct sync_method { static bool mesh_peer_tbtt_adjusting(struct ieee802_11_elems *ie) { return (ie->mesh_config->meshconf_cap & - MESHCONF_CAPAB_TBTT_ADJUSTING) != 0; + IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING) != 0; } void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata) @@ -116,43 +116,13 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, goto no_sync; } - if (rx_status->flag & RX_FLAG_MACTIME_MPDU && rx_status->mactime) { - /* - * The mactime is defined as the time the first data symbol - * of the frame hits the PHY, and the timestamp of the beacon - * is defined as "the time that the data symbol containing the - * first bit of the timestamp is transmitted to the PHY plus - * the transmitting STA's delays through its local PHY from the - * MAC-PHY interface to its interface with the WM" (802.11 - * 11.1.2) - * - * T_r, in 13.13.2.2.2, is just defined as "the frame reception - * time" but we unless we interpret that time to be the same - * time of the beacon timestamp, the offset calculation will be - * off. Below we adjust t_r to be "the time at which the first - * symbol of the timestamp element in the beacon is received". - * This correction depends on the rate. - * - * Based on similar code in ibss.c - */ - int rate; - - if (rx_status->flag & RX_FLAG_HT) { - /* TODO: - * In principle there could be HT-beacons (Dual Beacon - * HT Operation options), but for now ignore them and - * just use the primary (i.e. non-HT) beacons for - * synchronization. - * */ - goto no_sync; - } else - rate = local->hw.wiphy->bands[rx_status->band]-> - bitrates[rx_status->rate_idx].bitrate; - - /* 24 bytes of header * 8 bits/byte * - * 10*(100 Kbps)/Mbps / rate (100 Kbps)*/ - t_r = rx_status->mactime + (24 * 8 * 10 / rate); - } + if (ieee80211_have_rx_timestamp(rx_status)) + /* time when timestamp field was received */ + t_r = ieee80211_calculate_rx_timestamp(local, rx_status, + 24 + 12 + + elems->total_len + + FCS_LEN, + 24); /* Timing offset calculation (see 13.13.2.2.2) */ t_t = le64_to_cpu(mgmt->u.beacon.timestamp); @@ -225,58 +195,20 @@ static void mesh_sync_offset_adjust_tbtt(struct ieee80211_sub_if_data *sdata) ifmsh->sync_offset_clockdrift_max); set_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags); + + ifmsh->adjusting_tbtt = true; } else { msync_dbg(sdata, "TBTT : max clockdrift=%lld; too small to adjust\n", (long long)ifmsh->sync_offset_clockdrift_max); ifmsh->sync_offset_clockdrift_max = 0; + + ifmsh->adjusting_tbtt = false; } spin_unlock_bh(&ifmsh->sync_offset_lock); } -static const u8 *mesh_get_vendor_oui(struct ieee80211_sub_if_data *sdata) -{ - struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; - u8 offset; - - if (!ifmsh->ie || !ifmsh->ie_len) - return NULL; - - offset = ieee80211_ie_split_vendor(ifmsh->ie, - ifmsh->ie_len, 0); - - if (!offset) - return NULL; - - return ifmsh->ie + offset + 2; -} - -static void mesh_sync_vendor_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, - u16 stype, - struct ieee80211_mgmt *mgmt, - struct ieee802_11_elems *elems, - struct ieee80211_rx_status *rx_status) -{ - const u8 *oui; - - WARN_ON(sdata->u.mesh.mesh_sp_id != IEEE80211_SYNC_METHOD_VENDOR); - msync_dbg(sdata, "called mesh_sync_vendor_rx_bcn_presp\n"); - oui = mesh_get_vendor_oui(sdata); - /* here you would implement the vendor offset tracking for this oui */ -} - -static void mesh_sync_vendor_adjust_tbtt(struct ieee80211_sub_if_data *sdata) -{ - const u8 *oui; - - WARN_ON(sdata->u.mesh.mesh_sp_id != IEEE80211_SYNC_METHOD_VENDOR); - msync_dbg(sdata, "called mesh_sync_vendor_adjust_tbtt\n"); - oui = mesh_get_vendor_oui(sdata); - /* here you would implement the vendor tsf adjustment for this oui */ -} - -/* global variable */ -static struct sync_method sync_methods[] = { +static const struct sync_method sync_methods[] = { { .method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET, .ops = { @@ -284,18 +216,11 @@ static struct sync_method sync_methods[] = { .adjust_tbtt = &mesh_sync_offset_adjust_tbtt, } }, - { - .method = IEEE80211_SYNC_METHOD_VENDOR, - .ops = { - .rx_bcn_presp = &mesh_sync_vendor_rx_bcn_presp, - .adjust_tbtt = &mesh_sync_vendor_adjust_tbtt, - } - }, }; -struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method) +const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method) { - struct ieee80211_mesh_sync_ops *ops = NULL; + const struct ieee80211_mesh_sync_ops *ops = NULL; u8 i; for (i = 0 ; i < ARRAY_SIZE(sync_methods); ++i) { |