summaryrefslogtreecommitdiffstats
path: root/net/mac80211/mlme.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/mac80211/mlme.c')
-rw-r--r--net/mac80211/mlme.c84
1 files changed, 63 insertions, 21 deletions
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index c9ceb4d57ab..7b3f9df725b 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -28,8 +28,15 @@
#include "rate.h"
#include "led.h"
-#define IEEE80211_MAX_NULLFUNC_TRIES 2
-#define IEEE80211_MAX_PROBE_TRIES 5
+static int max_nullfunc_tries = 2;
+module_param(max_nullfunc_tries, int, 0644);
+MODULE_PARM_DESC(max_nullfunc_tries,
+ "Maximum nullfunc tx tries before disconnecting (reason 4).");
+
+static int max_probe_tries = 5;
+module_param(max_probe_tries, int, 0644);
+MODULE_PARM_DESC(max_probe_tries,
+ "Maximum probe tries before disconnecting (reason 4).");
/*
* Beacon loss timeout is calculated as N frames times the
@@ -51,7 +58,11 @@
* a probe request because of beacon loss or for
* checking the connection still works.
*/
-#define IEEE80211_PROBE_WAIT (HZ / 2)
+static int probe_wait_ms = 500;
+module_param(probe_wait_ms, int, 0644);
+MODULE_PARM_DESC(probe_wait_ms,
+ "Maximum time(ms) to wait for probe response"
+ " before disconnecting (reason 4).");
/*
* Weight given to the latest Beacon frame when calculating average signal
@@ -161,6 +172,7 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
struct ieee80211_supported_band *sband;
struct sta_info *sta;
u32 changed = 0;
+ int hti_cfreq;
u16 ht_opmode;
bool enable_ht = true;
enum nl80211_channel_type prev_chantype;
@@ -174,10 +186,27 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
if (!sband->ht_cap.ht_supported)
enable_ht = false;
- /* check that channel matches the right operating channel */
- if (local->hw.conf.channel->center_freq !=
- ieee80211_channel_to_frequency(hti->control_chan))
- enable_ht = false;
+ if (enable_ht) {
+ hti_cfreq = ieee80211_channel_to_frequency(hti->control_chan,
+ sband->band);
+ /* check that channel matches the right operating channel */
+ if (local->hw.conf.channel->center_freq != hti_cfreq) {
+ /* Some APs mess this up, evidently.
+ * Netgear WNDR3700 sometimes reports 4 higher than
+ * the actual channel, for instance.
+ */
+ printk(KERN_DEBUG
+ "%s: Wrong control channel in association"
+ " response: configured center-freq: %d"
+ " hti-cfreq: %d hti->control_chan: %d"
+ " band: %d. Disabling HT.\n",
+ sdata->name,
+ local->hw.conf.channel->center_freq,
+ hti_cfreq, hti->control_chan,
+ sband->band);
+ enable_ht = false;
+ }
+ }
if (enable_ht) {
channel_type = NL80211_CHAN_HT20;
@@ -429,7 +458,8 @@ void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
container_of((void *)bss, struct cfg80211_bss, priv);
struct ieee80211_channel *new_ch;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- int new_freq = ieee80211_channel_to_frequency(sw_elem->new_ch_num);
+ int new_freq = ieee80211_channel_to_frequency(sw_elem->new_ch_num,
+ cbss->channel->band);
ASSERT_MGD_MTX(ifmgd);
@@ -600,6 +630,14 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;
+ if (sdata->vif.type == NL80211_IFTYPE_AP) {
+ /* If an AP vif is found, then disable PS
+ * by setting the count to zero thereby setting
+ * ps_sdata to NULL.
+ */
+ count = 0;
+ break;
+ }
if (sdata->vif.type != NL80211_IFTYPE_STATION)
continue;
found = sdata;
@@ -1095,7 +1133,7 @@ static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
const u8 *ssid;
u8 *dst = ifmgd->associated->bssid;
- u8 unicast_limit = max(1, IEEE80211_MAX_PROBE_TRIES - 3);
+ u8 unicast_limit = max(1, max_probe_tries - 3);
/*
* Try sending broadcast probe requests for the last three
@@ -1121,7 +1159,7 @@ static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
}
ifmgd->probe_send_count++;
- ifmgd->probe_timeout = jiffies + IEEE80211_PROBE_WAIT;
+ ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
run_again(ifmgd, ifmgd->probe_timeout);
}
@@ -1222,7 +1260,8 @@ static void __ieee80211_connection_loss(struct ieee80211_sub_if_data *sdata)
memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
- printk(KERN_DEBUG "Connection to AP %pM lost.\n", bssid);
+ printk(KERN_DEBUG "%s: Connection to AP %pM lost.\n",
+ sdata->name, bssid);
ieee80211_set_disassoc(sdata, true, true);
mutex_unlock(&ifmgd->mtx);
@@ -1525,7 +1564,8 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
}
if (elems->ds_params && elems->ds_params_len == 1)
- freq = ieee80211_channel_to_frequency(elems->ds_params[0]);
+ freq = ieee80211_channel_to_frequency(elems->ds_params[0],
+ rx_status->band);
else
freq = rx_status->freq;
@@ -1966,9 +2006,9 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
- max_tries = IEEE80211_MAX_NULLFUNC_TRIES;
+ max_tries = max_nullfunc_tries;
else
- max_tries = IEEE80211_MAX_PROBE_TRIES;
+ max_tries = max_probe_tries;
/* ACK received for nullfunc probing frame */
if (!ifmgd->probe_send_count)
@@ -1978,9 +2018,9 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
wiphy_debug(local->hw.wiphy,
"%s: No ack for nullfunc frame to"
- " AP %pM, try %d\n",
+ " AP %pM, try %d/%i\n",
sdata->name, bssid,
- ifmgd->probe_send_count);
+ ifmgd->probe_send_count, max_tries);
#endif
ieee80211_mgd_probe_ap_send(sdata);
} else {
@@ -2000,17 +2040,17 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
"%s: Failed to send nullfunc to AP %pM"
" after %dms, disconnecting.\n",
sdata->name,
- bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ);
+ bssid, probe_wait_ms);
#endif
ieee80211_sta_connection_lost(sdata, bssid);
} else if (ifmgd->probe_send_count < max_tries) {
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
wiphy_debug(local->hw.wiphy,
"%s: No probe response from AP %pM"
- " after %dms, try %d\n",
+ " after %dms, try %d/%i\n",
sdata->name,
- bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ,
- ifmgd->probe_send_count);
+ bssid, probe_wait_ms,
+ ifmgd->probe_send_count, max_tries);
#endif
ieee80211_mgd_probe_ap_send(sdata);
} else {
@@ -2022,7 +2062,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
"%s: No probe response from AP %pM"
" after %dms, disconnecting.\n",
sdata->name,
- bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ);
+ bssid, probe_wait_ms);
ieee80211_sta_connection_lost(sdata, bssid);
}
@@ -2260,6 +2300,7 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
else
wk->type = IEEE80211_WORK_DIRECT_PROBE;
wk->chan = req->bss->channel;
+ wk->chan_type = NL80211_CHAN_NO_HT;
wk->sdata = sdata;
wk->done = ieee80211_probe_auth_done;
@@ -2409,6 +2450,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
memcpy(wk->assoc.prev_bssid, req->prev_bssid, ETH_ALEN);
wk->chan = req->bss->channel;
+ wk->chan_type = NL80211_CHAN_NO_HT;
wk->sdata = sdata;
wk->done = ieee80211_assoc_done;
if (!bss->dtim_period &&
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-16 01:52:56 +0000