diff options
Diffstat (limited to 'net/mac80211/mlme.c')
-rw-r--r-- | net/mac80211/mlme.c | 203 |
1 files changed, 93 insertions, 110 deletions
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 8149a37c93e..f1a80da4e56 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1186,19 +1186,16 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local, params.txop = get_unaligned_le16(pos + 2); params.uapsd = uapsd; -#ifdef CONFIG_MAC80211_VERBOSE_DEBUG - wiphy_debug(local->hw.wiphy, - "WMM queue=%d aci=%d acm=%d aifs=%d " - "cWmin=%d cWmax=%d txop=%d uapsd=%d\n", - queue, aci, acm, - params.aifs, params.cw_min, params.cw_max, - params.txop, params.uapsd); -#endif + mlme_dbg(sdata, + "WMM queue=%d aci=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d\n", + queue, aci, acm, + params.aifs, params.cw_min, params.cw_max, + params.txop, params.uapsd); sdata->tx_conf[queue] = params; if (drv_conf_tx(local, sdata, queue, ¶ms)) - wiphy_debug(local->hw.wiphy, - "failed to set TX queue parameters for queue %d\n", - queue); + sdata_err(sdata, + "failed to set TX queue parameters for queue %d\n", + queue); } /* enable WMM or activate new settings */ @@ -1567,11 +1564,10 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, goto out; } -#ifdef CONFIG_MAC80211_VERBOSE_DEBUG if (beacon) - net_dbg_ratelimited("%s: detected beacon loss from AP - sending probe request\n", - sdata->name); -#endif + mlme_dbg_ratelimited(sdata, + "detected beacon loss from AP - sending probe request\n"); + ieee80211_cqm_rssi_notify(&sdata->vif, NL80211_CQM_RSSI_BEACON_LOSS_EVENT, GFP_KERNEL); @@ -1656,7 +1652,7 @@ static void __ieee80211_connection_loss(struct ieee80211_sub_if_data *sdata) memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); - pr_debug("%s: Connection to AP %pM lost\n", sdata->name, bssid); + sdata_info(sdata, "Connection to AP %pM lost\n", bssid); ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, @@ -1790,8 +1786,8 @@ ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, return RX_MGMT_NONE; if (status_code != WLAN_STATUS_SUCCESS) { - pr_debug("%s: %pM denied authentication (status %d)\n", - sdata->name, mgmt->sa, status_code); + sdata_info(sdata, "%pM denied authentication (status %d)\n", + mgmt->sa, status_code); ieee80211_destroy_auth_data(sdata, false); return RX_MGMT_CFG80211_RX_AUTH; } @@ -1814,7 +1810,7 @@ ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, return RX_MGMT_NONE; } - pr_debug("%s: authenticated\n", sdata->name); + sdata_info(sdata, "authenticated\n"); ifmgd->auth_data->done = true; ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC; run_again(ifmgd, ifmgd->auth_data->timeout); @@ -1827,7 +1823,7 @@ ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, goto out_err; } if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) { - pr_debug("%s: failed moving %pM to auth\n", sdata->name, bssid); + sdata_info(sdata, "failed moving %pM to auth\n", bssid); goto out_err; } mutex_unlock(&sdata->local->sta_mtx); @@ -1861,8 +1857,8 @@ ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata, reason_code = le16_to_cpu(mgmt->u.deauth.reason_code); - pr_debug("%s: deauthenticated from %pM (Reason: %u)\n", - sdata->name, bssid, reason_code); + sdata_info(sdata, "deauthenticated from %pM (Reason: %u)\n", + bssid, reason_code); ieee80211_set_disassoc(sdata, 0, 0, false, NULL); @@ -1892,8 +1888,8 @@ ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code); - pr_debug("%s: disassociated from %pM (Reason: %u)\n", - sdata->name, mgmt->sa, reason_code); + sdata_info(sdata, "disassociated from %pM (Reason: %u)\n", + mgmt->sa, reason_code); ieee80211_set_disassoc(sdata, 0, 0, false, NULL); @@ -1985,15 +1981,15 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14))) - pr_debug("%s: invalid AID value 0x%x; bits 15:14 not set\n", - sdata->name, aid); + sdata_info(sdata, "invalid AID value 0x%x; bits 15:14 not set\n", + aid); aid &= ~(BIT(15) | BIT(14)); ifmgd->broken_ap = false; if (aid == 0 || aid > IEEE80211_MAX_AID) { - pr_debug("%s: invalid AID value %d (out of range), turn off PS\n", - sdata->name, aid); + sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n", + aid); aid = 0; ifmgd->broken_ap = true; } @@ -2002,8 +1998,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); if (!elems.supp_rates) { - pr_debug("%s: no SuppRates element in AssocResp\n", - sdata->name); + sdata_info(sdata, "no SuppRates element in AssocResp\n"); return false; } @@ -2043,8 +2038,9 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT)) err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); if (err) { - pr_debug("%s: failed to move station %pM to desired state\n", - sdata->name, sta->sta.addr); + sdata_info(sdata, + "failed to move station %pM to desired state\n", + sta->sta.addr); WARN_ON(__sta_info_destroy(sta)); mutex_unlock(&sdata->local->sta_mtx); return false; @@ -2127,9 +2123,10 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code); aid = le16_to_cpu(mgmt->u.assoc_resp.aid); - pr_debug("%s: RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n", - sdata->name, reassoc ? "Rea" : "A", mgmt->sa, - capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14)))); + sdata_info(sdata, + "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n", + reassoc ? "Rea" : "A", mgmt->sa, + capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14)))); pos = mgmt->u.assoc_resp.variable; ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); @@ -2140,8 +2137,9 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, u32 tu, ms; tu = get_unaligned_le32(elems.timeout_int + 1); ms = tu * 1024 / 1000; - pr_debug("%s: %pM rejected association temporarily; comeback duration %u TU (%u ms)\n", - sdata->name, mgmt->sa, tu, ms); + sdata_info(sdata, + "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n", + mgmt->sa, tu, ms); assoc_data->timeout = jiffies + msecs_to_jiffies(ms); if (ms > IEEE80211_ASSOC_TIMEOUT) run_again(ifmgd, assoc_data->timeout); @@ -2151,11 +2149,11 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, *bss = assoc_data->bss; if (status_code != WLAN_STATUS_SUCCESS) { - pr_debug("%s: %pM denied association (code=%d)\n", - sdata->name, mgmt->sa, status_code); + sdata_info(sdata, "%pM denied association (code=%d)\n", + mgmt->sa, status_code); ieee80211_destroy_assoc_data(sdata, false); } else { - pr_debug("%s: associated\n", sdata->name); + sdata_info(sdata, "associated\n"); if (!ieee80211_assoc_success(sdata, *bss, mgmt, len)) { /* oops -- internal error -- send timeout for now */ @@ -2263,7 +2261,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, if (ifmgd->auth_data && !ifmgd->auth_data->bss->proberesp_ies && ether_addr_equal(mgmt->bssid, ifmgd->auth_data->bss->bssid)) { /* got probe response, continue with auth */ - pr_debug("%s: direct probe responded\n", sdata->name); + sdata_info(sdata, "direct probe responded\n"); ifmgd->auth_data->tries = 0; ifmgd->auth_data->timeout = jiffies; run_again(ifmgd, ifmgd->auth_data->timeout); @@ -2399,10 +2397,8 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, } if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) { -#ifdef CONFIG_MAC80211_VERBOSE_DEBUG - net_dbg_ratelimited("%s: cancelling probereq poll due to a received beacon\n", - sdata->name); -#endif + mlme_dbg_ratelimited(sdata, + "cancelling probereq poll due to a received beacon\n"); mutex_lock(&local->mtx); ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL; ieee80211_run_deferred_scan(local); @@ -2625,8 +2621,8 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) auth_data->tries++; if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) { - pr_debug("%s: authentication with %pM timed out\n", - sdata->name, auth_data->bss->bssid); + sdata_info(sdata, "authentication with %pM timed out\n", + auth_data->bss->bssid); /* * Most likely AP is not in the range so remove the @@ -2638,9 +2634,9 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) } if (auth_data->bss->proberesp_ies) { - pr_debug("%s: send auth to %pM (try %d/%d)\n", - sdata->name, auth_data->bss->bssid, auth_data->tries, - IEEE80211_AUTH_MAX_TRIES); + sdata_info(sdata, "send auth to %pM (try %d/%d)\n", + auth_data->bss->bssid, auth_data->tries, + IEEE80211_AUTH_MAX_TRIES); auth_data->expected_transaction = 2; ieee80211_send_auth(sdata, 1, auth_data->algorithm, @@ -2650,9 +2646,9 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) } else { const u8 *ssidie; - pr_debug("%s: direct probe to %pM (try %d/%i)\n", - sdata->name, auth_data->bss->bssid, auth_data->tries, - IEEE80211_AUTH_MAX_TRIES); + sdata_info(sdata, "direct probe to %pM (try %d/%i)\n", + auth_data->bss->bssid, auth_data->tries, + IEEE80211_AUTH_MAX_TRIES); ssidie = ieee80211_bss_get_ie(auth_data->bss, WLAN_EID_SSID); if (!ssidie) @@ -2680,8 +2676,8 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) assoc_data->tries++; if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) { - pr_debug("%s: association with %pM timed out\n", - sdata->name, assoc_data->bss->bssid); + sdata_info(sdata, "association with %pM timed out\n", + assoc_data->bss->bssid); /* * Most likely AP is not in the range so remove the @@ -2692,9 +2688,9 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) return -ETIMEDOUT; } - pr_debug("%s: associate with %pM (try %d/%d)\n", - sdata->name, assoc_data->bss->bssid, assoc_data->tries, - IEEE80211_ASSOC_MAX_TRIES); + sdata_info(sdata, "associate with %pM (try %d/%d)\n", + assoc_data->bss->bssid, assoc_data->tries, + IEEE80211_ASSOC_MAX_TRIES); ieee80211_send_assoc(sdata); assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; @@ -2767,45 +2763,31 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) ieee80211_reset_ap_probe(sdata); else if (ifmgd->nullfunc_failed) { if (ifmgd->probe_send_count < max_tries) { -#ifdef CONFIG_MAC80211_VERBOSE_DEBUG - wiphy_debug(local->hw.wiphy, - "%s: No ack for nullfunc frame to" - " AP %pM, try %d/%i\n", - sdata->name, bssid, - ifmgd->probe_send_count, max_tries); -#endif + mlme_dbg(sdata, + "No ack for nullfunc frame to AP %pM, try %d/%i\n", + bssid, ifmgd->probe_send_count, + max_tries); ieee80211_mgd_probe_ap_send(sdata); } else { -#ifdef CONFIG_MAC80211_VERBOSE_DEBUG - wiphy_debug(local->hw.wiphy, - "%s: No ack for nullfunc frame to" - " AP %pM, disconnecting.\n", - sdata->name, bssid); -#endif + mlme_dbg(sdata, + "No ack for nullfunc frame to AP %pM, disconnecting.\n", + bssid); ieee80211_sta_connection_lost(sdata, bssid, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); } } else if (time_is_after_jiffies(ifmgd->probe_timeout)) run_again(ifmgd, ifmgd->probe_timeout); else if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) { -#ifdef CONFIG_MAC80211_VERBOSE_DEBUG - wiphy_debug(local->hw.wiphy, - "%s: Failed to send nullfunc to AP %pM" - " after %dms, disconnecting.\n", - sdata->name, - bssid, probe_wait_ms); -#endif + mlme_dbg(sdata, + "Failed to send nullfunc to AP %pM after %dms, disconnecting\n", + bssid, probe_wait_ms); ieee80211_sta_connection_lost(sdata, bssid, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); } else if (ifmgd->probe_send_count < max_tries) { -#ifdef CONFIG_MAC80211_VERBOSE_DEBUG - wiphy_debug(local->hw.wiphy, - "%s: No probe response from AP %pM" - " after %dms, try %d/%i\n", - sdata->name, - bssid, probe_wait_ms, - ifmgd->probe_send_count, max_tries); -#endif + mlme_dbg(sdata, + "No probe response from AP %pM after %dms, try %d/%i\n", + bssid, probe_wait_ms, + ifmgd->probe_send_count, max_tries); ieee80211_mgd_probe_ap_send(sdata); } else { /* @@ -2920,11 +2902,8 @@ void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME; mutex_lock(&ifmgd->mtx); if (ifmgd->associated) { -#ifdef CONFIG_MAC80211_VERBOSE_DEBUG - wiphy_debug(sdata->local->hw.wiphy, - "%s: driver requested disconnect after resume.\n", - sdata->name); -#endif + mlme_dbg(sdata, + "driver requested disconnect after resume\n"); ieee80211_sta_connection_lost(sdata, ifmgd->associated->bssid, WLAN_REASON_UNSPECIFIED); @@ -3065,10 +3044,11 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, * since we look at probe response/beacon data here * it should be OK. */ - pr_debug("%s: Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", - sdata->name, cbss->channel->center_freq, - ht_cfreq, ht_oper->primary_chan, - cbss->channel->band); + sdata_info(sdata, + "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", + cbss->channel->center_freq, + ht_cfreq, ht_oper->primary_chan, + cbss->channel->band); ht_oper = NULL; } } @@ -3092,8 +3072,8 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, if (!ieee80211_set_channel_type(local, sdata, channel_type)) { /* can only fail due to HT40+/- mismatch */ channel_type = NL80211_CHAN_HT20; - pr_debug("%s: disabling 40 MHz due to multi-vif mismatch\n", - sdata->name); + sdata_info(sdata, + "disabling 40 MHz due to multi-vif mismatch\n"); ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ; WARN_ON(!ieee80211_set_channel_type(local, sdata, channel_type)); @@ -3122,8 +3102,8 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, * we can connect -- with a warning. */ if (!basic_rates && min_rate_index >= 0) { - pr_debug("%s: No basic rates, using min rate instead\n", - sdata->name); + sdata_info(sdata, + "No basic rates, using min rate instead\n"); basic_rates = BIT(min_rate_index); } @@ -3149,8 +3129,9 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, err = sta_info_insert(sta); sta = NULL; if (err) { - pr_debug("%s: failed to insert STA entry for the AP (error %d)\n", - sdata->name, err); + sdata_info(sdata, + "failed to insert STA entry for the AP (error %d)\n", + err); return err; } } else @@ -3228,7 +3209,7 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, if (ifmgd->associated) ieee80211_set_disassoc(sdata, 0, 0, false, NULL); - pr_debug("%s: authenticate with %pM\n", sdata->name, req->bss->bssid); + sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid); err = ieee80211_prep_connection(sdata, req->bss, false); if (err) @@ -3410,8 +3391,8 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, * Wait up to one beacon interval ... * should this be more if we miss one? */ - pr_debug("%s: waiting for beacon from %pM\n", - sdata->name, ifmgd->bssid); + sdata_info(sdata, "waiting for beacon from %pM\n", + ifmgd->bssid); assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval); } else { assoc_data->have_beacon = true; @@ -3430,8 +3411,8 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, corrupt_type = "beacon"; } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP) corrupt_type = "probe response"; - pr_debug("%s: associating with AP with corrupt %s\n", - sdata->name, corrupt_type); + sdata_info(sdata, "associating with AP with corrupt %s\n", + corrupt_type); } err = 0; @@ -3460,8 +3441,9 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, return 0; } - pr_debug("%s: deauthenticating from %pM by local choice (reason=%d)\n", - sdata->name, req->bssid, req->reason_code); + sdata_info(sdata, + "deauthenticating from %pM by local choice (reason=%d)\n", + req->bssid, req->reason_code); if (ifmgd->associated && ether_addr_equal(ifmgd->associated->bssid, req->bssid)) @@ -3503,8 +3485,9 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, return -ENOLINK; } - pr_debug("%s: disassociating from %pM by local choice (reason=%d)\n", - sdata->name, req->bss->bssid, req->reason_code); + sdata_info(sdata, + "disassociating from %pM by local choice (reason=%d)\n", + req->bss->bssid, req->reason_code); memcpy(bssid, req->bss->bssid, ETH_ALEN); ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC, |