diff options
Diffstat (limited to 'net/mac80211/regdomain.c')
| -rw-r--r-- | net/mac80211/regdomain.c | 158 |
1 files changed, 158 insertions, 0 deletions
diff --git a/net/mac80211/regdomain.c b/net/mac80211/regdomain.c new file mode 100644 index 00000000000..b697a2afbb4 --- /dev/null +++ b/net/mac80211/regdomain.c @@ -0,0 +1,158 @@ +/* + * Copyright 2002-2005, Instant802 Networks, Inc. + * Copyright 2005-2006, Devicescape Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * This regulatory domain control implementation is known to be incomplete + * and confusing. mac80211 regulatory domain control will be significantly + * reworked in the not-too-distant future. + * + * For now, drivers wishing to control which channels are and aren't available + * are advised as follows: + * - set the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag + * - continue to include *ALL* possible channels in the modes registered + * through ieee80211_register_hwmode() + * - for each allowable ieee80211_channel structure registered in the above + * call, set the flag member to some meaningful value such as + * IEEE80211_CHAN_W_SCAN | IEEE80211_CHAN_W_ACTIVE_SCAN | + * IEEE80211_CHAN_W_IBSS. + * - leave flag as 0 for non-allowable channels + * + * The usual implementation is for a driver to read a device EEPROM to + * determine which regulatory domain it should be operating under, then + * looking up the allowable channels in a driver-local table, then performing + * the above. + */ + +#include <linux/module.h> +#include <linux/netdevice.h> +#include <net/mac80211.h> +#include "ieee80211_i.h" + +static int ieee80211_regdom = 0x10; /* FCC */ +module_param(ieee80211_regdom, int, 0444); +MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain; 64=MKK"); + +/* + * If firmware is upgraded by the vendor, additional channels can be used based + * on the new Japanese regulatory rules. This is indicated by setting + * ieee80211_japan_5ghz module parameter to one when loading the 80211 kernel + * module. + */ +static int ieee80211_japan_5ghz /* = 0 */; +module_param(ieee80211_japan_5ghz, int, 0444); +MODULE_PARM_DESC(ieee80211_japan_5ghz, "Vendor-updated firmware for 5 GHz"); + + +struct ieee80211_channel_range { + short start_freq; + short end_freq; + unsigned char power_level; + unsigned char antenna_max; +}; + +static const struct ieee80211_channel_range ieee80211_fcc_channels[] = { + { 2412, 2462, 27, 6 } /* IEEE 802.11b/g, channels 1..11 */, + { 5180, 5240, 17, 6 } /* IEEE 802.11a, channels 36..48 */, + { 5260, 5320, 23, 6 } /* IEEE 802.11a, channels 52..64 */, + { 5745, 5825, 30, 6 } /* IEEE 802.11a, channels 149..165, outdoor */, + { 0 } +}; + +static const struct ieee80211_channel_range ieee80211_mkk_channels[] = { + { 2412, 2472, 20, 6 } /* IEEE 802.11b/g, channels 1..13 */, + { 5170, 5240, 20, 6 } /* IEEE 802.11a, channels 34..48 */, + { 5260, 5320, 20, 6 } /* IEEE 802.11a, channels 52..64 */, + { 0 } +}; + + +static const struct ieee80211_channel_range *channel_range = + ieee80211_fcc_channels; + + +static void ieee80211_unmask_channel(int mode, struct ieee80211_channel *chan) +{ + int i; + + chan->flag = 0; + + if (ieee80211_regdom == 64 && + (mode == MODE_ATHEROS_TURBO || mode == MODE_ATHEROS_TURBOG)) { + /* Do not allow Turbo modes in Japan. */ + return; + } + + for (i = 0; channel_range[i].start_freq; i++) { + const struct ieee80211_channel_range *r = &channel_range[i]; + if (r->start_freq <= chan->freq && r->end_freq >= chan->freq) { + if (ieee80211_regdom == 64 && !ieee80211_japan_5ghz && + chan->freq >= 5260 && chan->freq <= 5320) { + /* + * Skip new channels in Japan since the + * firmware was not marked having been upgraded + * by the vendor. + */ + continue; + } + + if (ieee80211_regdom == 0x10 && + (chan->freq == 5190 || chan->freq == 5210 || + chan->freq == 5230)) { + /* Skip MKK channels when in FCC domain. */ + continue; + } + + chan->flag |= IEEE80211_CHAN_W_SCAN | + IEEE80211_CHAN_W_ACTIVE_SCAN | + IEEE80211_CHAN_W_IBSS; + chan->power_level = r->power_level; + chan->antenna_max = r->antenna_max; + + if (ieee80211_regdom == 64 && + (chan->freq == 5170 || chan->freq == 5190 || + chan->freq == 5210 || chan->freq == 5230)) { + /* + * New regulatory rules in Japan have backwards + * compatibility with old channels in 5.15-5.25 + * GHz band, but the station is not allowed to + * use active scan on these old channels. + */ + chan->flag &= ~IEEE80211_CHAN_W_ACTIVE_SCAN; + } + + if (ieee80211_regdom == 64 && + (chan->freq == 5260 || chan->freq == 5280 || + chan->freq == 5300 || chan->freq == 5320)) { + /* + * IBSS is not allowed on 5.25-5.35 GHz band + * due to radar detection requirements. + */ + chan->flag &= ~IEEE80211_CHAN_W_IBSS; + } + + break; + } + } +} + + +void ieee80211_set_default_regdomain(struct ieee80211_hw_mode *mode) +{ + int c; + for (c = 0; c < mode->num_channels; c++) + ieee80211_unmask_channel(mode->mode, &mode->channels[c]); +} + + +void ieee80211_regdomain_init(void) +{ + if (ieee80211_regdom == 0x40) + channel_range = ieee80211_mkk_channels; +} + |