summaryrefslogtreecommitdiffstats
path: root/net/mac80211
diff options
context:
space:
mode:
Diffstat (limited to 'net/mac80211')
-rw-r--r--net/mac80211/Kconfig7
-rw-r--r--net/mac80211/main.c22
-rw-r--r--net/mac80211/mlme.c38
-rw-r--r--net/mac80211/pm.c15
-rw-r--r--net/mac80211/rx.c15
-rw-r--r--net/mac80211/wext.c43
6 files changed, 97 insertions, 43 deletions
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index f3d9ae350fb..ecc3faf9f11 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -202,10 +202,3 @@ config MAC80211_DEBUG_COUNTERS
and show them in debugfs.
If unsure, say N.
-
-config MAC80211_VERBOSE_SPECT_MGMT_DEBUG
- bool "Verbose Spectrum Management (IEEE 802.11h)debugging"
- depends on MAC80211_DEBUG_MENU
- ---help---
- Say Y here to print out verbose Spectrum Management (IEEE 802.11h)
- debug messages.
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index a6f1d8a869b..14134193cd1 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -258,7 +258,7 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
(chan->max_power - local->power_constr_level) :
chan->max_power;
- if (local->user_power_level)
+ if (local->user_power_level >= 0)
power = min(power, local->user_power_level);
if (local->hw.conf.power_level != power) {
@@ -757,6 +757,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
local->hw.conf.long_frame_max_tx_count = 4;
local->hw.conf.short_frame_max_tx_count = 7;
local->hw.conf.radio_enabled = true;
+ local->user_power_level = -1;
INIT_LIST_HEAD(&local->interfaces);
mutex_init(&local->iflist_mtx);
@@ -909,6 +910,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
if (result < 0)
goto fail_sta_info;
+ result = ieee80211_wep_init(local);
+ if (result < 0) {
+ printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
+ wiphy_name(local->hw.wiphy), result);
+ goto fail_wep;
+ }
+
rtnl_lock();
result = dev_alloc_name(local->mdev, local->mdev->name);
if (result < 0)
@@ -930,14 +938,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
goto fail_rate;
}
- result = ieee80211_wep_init(local);
-
- if (result < 0) {
- printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
- wiphy_name(local->hw.wiphy), result);
- goto fail_wep;
- }
-
/* add one default STA interface if supported */
if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) {
result = ieee80211_if_add(local, "wlan%d", NULL,
@@ -967,13 +967,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
return 0;
-fail_wep:
- rate_control_deinitialize(local);
fail_rate:
unregister_netdevice(local->mdev);
local->mdev = NULL;
fail_dev:
rtnl_unlock();
+ ieee80211_wep_free(local);
+fail_wep:
sta_info_stop(local);
fail_sta_info:
debugfs_hw_del(local);
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 7ecda9d59d8..132938b073d 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -441,6 +441,9 @@ static bool ieee80211_check_tim(struct ieee802_11_elems *elems, u16 aid)
u8 index, indexn1, indexn2;
struct ieee80211_tim_ie *tim = (struct ieee80211_tim_ie *) elems->tim;
+ if (unlikely(!tim || elems->tim_len < 4))
+ return false;
+
aid &= 0x3fff;
index = aid / 8;
mask = 1 << (aid & 7);
@@ -945,9 +948,13 @@ void ieee80211_beacon_loss_work(struct work_struct *work)
u.mgd.beacon_loss_work);
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM "
- "- sending probe request\n", sdata->dev->name,
- sdata->u.mgd.bssid);
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM "
+ "- sending probe request\n", sdata->dev->name,
+ sdata->u.mgd.bssid);
+ }
+#endif
ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
@@ -1007,9 +1014,13 @@ static void ieee80211_associated(struct ieee80211_sub_if_data *sdata)
(local->hw.conf.flags & IEEE80211_CONF_PS)) &&
time_after(jiffies,
ifmgd->last_beacon + IEEE80211_MONITORING_INTERVAL)) {
- printk(KERN_DEBUG "%s: beacon loss from AP %pM "
- "- sending probe request\n",
- sdata->dev->name, ifmgd->bssid);
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "%s: beacon loss from AP %pM "
+ "- sending probe request\n",
+ sdata->dev->name, ifmgd->bssid);
+ }
+#endif
ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
ifmgd->ssid_len, NULL, 0);
@@ -1355,7 +1366,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
for (i = 0; i < elems.ext_supp_rates_len; i++) {
int rate = (elems.ext_supp_rates[i] & 0x7f) * 5;
- bool is_basic = !!(elems.supp_rates[i] & 0x80);
+ bool is_basic = !!(elems.ext_supp_rates[i] & 0x80);
if (rate > 110)
have_higher_than_11mbit = true;
@@ -1902,9 +1913,17 @@ static void ieee80211_sta_work(struct work_struct *work)
static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
{
- if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ /*
+ * Need to update last_beacon to avoid beacon loss
+ * test to trigger.
+ */
+ sdata->u.mgd.last_beacon = jiffies;
+
+
queue_work(sdata->local->hw.workqueue,
&sdata->u.mgd.work);
+ }
}
/* interface setup */
@@ -2105,12 +2124,13 @@ void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
struct ieee80211_local *local =
container_of(work, struct ieee80211_local,
dynamic_ps_enable_work);
+ /* XXX: using scan_sdata is completely broken! */
struct ieee80211_sub_if_data *sdata = local->scan_sdata;
if (local->hw.conf.flags & IEEE80211_CONF_PS)
return;
- if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
+ if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK && sdata)
ieee80211_send_nullfunc(local, sdata, 1);
local->hw.conf.flags |= IEEE80211_CONF_PS;
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 02730232649..81985d27cbd 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -156,8 +156,19 @@ int __ieee80211_resume(struct ieee80211_hw *hw)
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
- WARN_ON(ieee80211_if_config(sdata, changed));
- ieee80211_bss_info_change_notify(sdata, ~0);
+ /*
+ * Driver's config_interface can fail if rfkill is
+ * enabled. Accommodate this return code.
+ * FIXME: When mac80211 has knowledge of rfkill
+ * state the code below can change back to:
+ * WARN(ieee80211_if_config(sdata, changed));
+ * ieee80211_bss_info_change_notify(sdata, ~0);
+ */
+ if (ieee80211_if_config(sdata, changed))
+ printk(KERN_DEBUG "%s: failed to configure interface during resume\n",
+ sdata->dev->name);
+ else
+ ieee80211_bss_info_change_notify(sdata, ~0);
break;
case NL80211_IFTYPE_WDS:
break;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 64ebe664eff..9776f73c51a 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -29,6 +29,7 @@
static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
struct tid_ampdu_rx *tid_agg_rx,
struct sk_buff *skb,
+ struct ieee80211_rx_status *status,
u16 mpdu_seq_num,
int bar_req);
/*
@@ -1396,7 +1397,7 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx)
* mac80211. That also explains the __skb_push()
* below.
*/
- align = (unsigned long)skb->data & 4;
+ align = (unsigned long)skb->data & 3;
if (align) {
if (WARN_ON(skb_headroom(skb) < 3)) {
dev_kfree_skb(skb);
@@ -1688,7 +1689,7 @@ ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx)
/* manage reordering buffer according to requested */
/* sequence number */
rcu_read_lock();
- ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL,
+ ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL, NULL,
start_seq_num, 1);
rcu_read_unlock();
return RX_DROP_UNUSABLE;
@@ -2293,6 +2294,7 @@ static inline u16 seq_sub(u16 sq1, u16 sq2)
static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
struct tid_ampdu_rx *tid_agg_rx,
struct sk_buff *skb,
+ struct ieee80211_rx_status *rxstatus,
u16 mpdu_seq_num,
int bar_req)
{
@@ -2374,6 +2376,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
/* put the frame in the reordering buffer */
tid_agg_rx->reorder_buf[index] = skb;
+ memcpy(tid_agg_rx->reorder_buf[index]->cb, rxstatus,
+ sizeof(*rxstatus));
tid_agg_rx->stored_mpdu_num++;
/* release the buffer until next missing frame */
index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn)
@@ -2399,7 +2403,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
}
static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local,
- struct sk_buff *skb)
+ struct sk_buff *skb,
+ struct ieee80211_rx_status *status)
{
struct ieee80211_hw *hw = &local->hw;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
@@ -2448,7 +2453,7 @@ static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local,
/* according to mpdu sequence number deal with reordering buffer */
mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4;
- ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb,
+ ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, status,
mpdu_seq_num, 0);
end_reorder:
return ret;
@@ -2512,7 +2517,7 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
return;
}
- if (!ieee80211_rx_reorder_ampdu(local, skb))
+ if (!ieee80211_rx_reorder_ampdu(local, skb, status))
__ieee80211_rx_handle_packet(hw, skb, status, rate);
rcu_read_unlock();
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index deb4ecec122..959aa8379cc 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -417,6 +417,7 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev,
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_channel* chan = local->hw.conf.channel;
+ bool reconf = false;
u32 reconf_flags = 0;
int new_power_level;
@@ -427,14 +428,38 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev,
if (!chan)
return -EINVAL;
- if (data->txpower.fixed)
- new_power_level = min(data->txpower.value, chan->max_power);
- else /* Automatic power level setting */
- new_power_level = chan->max_power;
+ /* only change when not disabling */
+ if (!data->txpower.disabled) {
+ if (data->txpower.fixed) {
+ if (data->txpower.value < 0)
+ return -EINVAL;
+ new_power_level = data->txpower.value;
+ /*
+ * Debatable, but we cannot do a fixed power
+ * level above the regulatory constraint.
+ * Use "iwconfig wlan0 txpower 15dBm" instead.
+ */
+ if (new_power_level > chan->max_power)
+ return -EINVAL;
+ } else {
+ /*
+ * Automatic power level setting, max being the value
+ * passed in from userland.
+ */
+ if (data->txpower.value < 0)
+ new_power_level = -1;
+ else
+ new_power_level = data->txpower.value;
+ }
+
+ reconf = true;
- local->user_power_level = new_power_level;
- if (local->hw.conf.power_level != new_power_level)
- reconf_flags |= IEEE80211_CONF_CHANGE_POWER;
+ /*
+ * ieee80211_hw_config() will limit to the channel's
+ * max power and possibly power constraint from AP.
+ */
+ local->user_power_level = new_power_level;
+ }
if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) {
local->hw.conf.radio_enabled = !(data->txpower.disabled);
@@ -442,7 +467,7 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev,
ieee80211_led_radio(local, local->hw.conf.radio_enabled);
}
- if (reconf_flags)
+ if (reconf || reconf_flags)
ieee80211_hw_config(local, reconf_flags);
return 0;
@@ -530,7 +555,7 @@ static int ieee80211_ioctl_giwfrag(struct net_device *dev,
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
frag->value = local->fragmentation_threshold;
- frag->disabled = (frag->value >= IEEE80211_MAX_RTS_THRESHOLD);
+ frag->disabled = (frag->value >= IEEE80211_MAX_FRAG_THRESHOLD);
frag->fixed = 1;
return 0;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-25 09:13:59 +0000