diff options
Diffstat (limited to 'net/mac80211')
-rw-r--r-- | net/mac80211/cfg.c | 125 |
1 files changed, 78 insertions, 47 deletions
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index ca28405d5f6..c115f82c037 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1177,6 +1177,18 @@ static int sta_apply_parameters(struct ieee80211_local *local, mask |= BIT(NL80211_STA_FLAG_ASSOCIATED); if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) set |= BIT(NL80211_STA_FLAG_ASSOCIATED); + } else if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { + /* + * TDLS -- everything follows authorized, but + * only becoming authorized is possible, not + * going back + */ + if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) { + set |= BIT(NL80211_STA_FLAG_AUTHENTICATED) | + BIT(NL80211_STA_FLAG_ASSOCIATED); + mask |= BIT(NL80211_STA_FLAG_AUTHENTICATED) | + BIT(NL80211_STA_FLAG_ASSOCIATED); + } } ret = sta_apply_auth_flags(local, sta, mask, set); @@ -1261,9 +1273,8 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (ieee80211_vif_is_mesh(&sdata->vif)) { #ifdef CONFIG_MAC80211_MESH u32 changed = 0; - if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED && - (params->sta_modify_mask & - STATION_PARAM_APPLY_PLINK_STATE)) { + + if (params->sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE) { switch (params->plink_state) { case NL80211_PLINK_ESTAB: if (sta->plink_state != NL80211_PLINK_ESTAB) @@ -1294,21 +1305,18 @@ static int sta_apply_parameters(struct ieee80211_local *local, /* nothing */ break; } - } else if (params->sta_modify_mask & - STATION_PARAM_APPLY_PLINK_STATE) { - return -EINVAL; - } else { - switch (params->plink_action) { - case NL80211_PLINK_ACTION_NO_ACTION: - /* nothing */ - break; - case NL80211_PLINK_ACTION_OPEN: - changed |= mesh_plink_open(sta); - break; - case NL80211_PLINK_ACTION_BLOCK: - changed |= mesh_plink_block(sta); - break; - } + } + + switch (params->plink_action) { + case NL80211_PLINK_ACTION_NO_ACTION: + /* nothing */ + break; + case NL80211_PLINK_ACTION_OPEN: + changed |= mesh_plink_open(sta); + break; + case NL80211_PLINK_ACTION_BLOCK: + changed |= mesh_plink_block(sta); + break; } if (params->local_pm) @@ -1354,8 +1362,10 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, * defaults -- if userspace wants something else we'll * change it accordingly in sta_apply_parameters() */ - sta_info_pre_move_state(sta, IEEE80211_STA_AUTH); - sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC); + if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))) { + sta_info_pre_move_state(sta, IEEE80211_STA_AUTH); + sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC); + } err = sta_apply_parameters(local, sta, params); if (err) { @@ -1364,8 +1374,8 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, } /* - * for TDLS, rate control should be initialized only when supported - * rates are known. + * for TDLS, rate control should be initialized only when + * rates are known and station is marked authorized */ if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) rate_control_rate_init(sta); @@ -1402,50 +1412,67 @@ static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev, } static int ieee80211_change_station(struct wiphy *wiphy, - struct net_device *dev, - u8 *mac, + struct net_device *dev, u8 *mac, struct station_parameters *params) { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_local *local = wiphy_priv(wiphy); struct sta_info *sta; struct ieee80211_sub_if_data *vlansdata; + enum cfg80211_station_type statype; int err; mutex_lock(&local->sta_mtx); sta = sta_info_get_bss(sdata, mac); if (!sta) { - mutex_unlock(&local->sta_mtx); - return -ENOENT; + err = -ENOENT; + goto out_err; } - /* in station mode, some updates are only valid with TDLS */ - if (sdata->vif.type == NL80211_IFTYPE_STATION && - (params->supported_rates || params->ht_capa || params->vht_capa || - params->sta_modify_mask || - (params->sta_flags_mask & BIT(NL80211_STA_FLAG_WME))) && - !test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { - mutex_unlock(&local->sta_mtx); - return -EINVAL; + switch (sdata->vif.type) { + case NL80211_IFTYPE_MESH_POINT: + if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) + statype = CFG80211_STA_MESH_PEER_SECURE; + else + statype = CFG80211_STA_MESH_PEER_NONSEC; + break; + case NL80211_IFTYPE_ADHOC: + statype = CFG80211_STA_IBSS; + break; + case NL80211_IFTYPE_STATION: + if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { + statype = CFG80211_STA_AP_STA; + break; + } + if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) + statype = CFG80211_STA_TDLS_PEER_ACTIVE; + else + statype = CFG80211_STA_TDLS_PEER_SETUP; + break; + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_AP_VLAN: + statype = CFG80211_STA_AP_CLIENT; + break; + default: + err = -EOPNOTSUPP; + goto out_err; } + err = cfg80211_check_station_change(wiphy, params, statype); + if (err) + goto out_err; + if (params->vlan && params->vlan != sta->sdata->dev) { bool prev_4addr = false; bool new_4addr = false; vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); - if (vlansdata->vif.type != NL80211_IFTYPE_AP_VLAN && - vlansdata->vif.type != NL80211_IFTYPE_AP) { - mutex_unlock(&local->sta_mtx); - return -EINVAL; - } - if (params->vlan->ieee80211_ptr->use_4addr) { if (vlansdata->u.vlan.sta) { - mutex_unlock(&local->sta_mtx); - return -EBUSY; + err = -EBUSY; + goto out_err; } rcu_assign_pointer(vlansdata->u.vlan.sta, sta); @@ -1472,12 +1499,12 @@ static int ieee80211_change_station(struct wiphy *wiphy, } err = sta_apply_parameters(local, sta, params); - if (err) { - mutex_unlock(&local->sta_mtx); - return err; - } + if (err) + goto out_err; - if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) && params->supported_rates) + /* When peer becomes authorized, init rate control as well */ + if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) && + test_sta_flag(sta, WLAN_STA_AUTHORIZED)) rate_control_rate_init(sta); mutex_unlock(&local->sta_mtx); @@ -1487,7 +1514,11 @@ static int ieee80211_change_station(struct wiphy *wiphy, ieee80211_recalc_ps(local, -1); ieee80211_recalc_ps_vif(sdata); } + return 0; +out_err: + mutex_unlock(&local->sta_mtx); + return err; } #ifdef CONFIG_MAC80211_MESH |