summaryrefslogtreecommitdiffstats
path: root/net/wanrouter/wanmain.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/wanrouter/wanmain.c')
-rw-r--r--net/wanrouter/wanmain.c782
1 files changed, 0 insertions, 782 deletions
diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c
deleted file mode 100644
index 2ab785064b7..00000000000
--- a/net/wanrouter/wanmain.c
+++ /dev/null
@@ -1,782 +0,0 @@
-/*****************************************************************************
-* wanmain.c WAN Multiprotocol Router Module. Main code.
-*
-* This module is completely hardware-independent and provides
-* the following common services for the WAN Link Drivers:
-* o WAN device management (registering, unregistering)
-* o Network interface management
-* o Physical connection management (dial-up, incoming calls)
-* o Logical connection management (switched virtual circuits)
-* o Protocol encapsulation/decapsulation
-*
-* Author: Gideon Hack
-*
-* Copyright: (c) 1995-1999 Sangoma Technologies Inc.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-* ============================================================================
-* Nov 24, 2000 Nenad Corbic Updated for 2.4.X kernels
-* Nov 07, 2000 Nenad Corbic Fixed the Mulit-Port PPP for kernels 2.2.16 and
-* greater.
-* Aug 2, 2000 Nenad Corbic Block the Multi-Port PPP from running on
-* kernels 2.2.16 or greater. The SyncPPP
-* has changed.
-* Jul 13, 2000 Nenad Corbic Added SyncPPP support
-* Added extra debugging in device_setup().
-* Oct 01, 1999 Gideon Hack Update for s514 PCI card
-* Dec 27, 1996 Gene Kozin Initial version (based on Sangoma's WANPIPE)
-* Jan 16, 1997 Gene Kozin router_devlist made public
-* Jan 31, 1997 Alan Cox Hacked it about a bit for 2.1
-* Jun 27, 1997 Alan Cox realigned with vendor code
-* Oct 15, 1997 Farhan Thawar changed wan_encapsulate to add a pad byte of 0
-* Apr 20, 1998 Alan Cox Fixed 2.1 symbols
-* May 17, 1998 K. Baranowski Fixed SNAP encapsulation in wan_encapsulate
-* Dec 15, 1998 Arnaldo Melo support for firmwares of up to 128000 bytes
-* check wandev->setup return value
-* Dec 22, 1998 Arnaldo Melo vmalloc/vfree used in device_setup to allocate
-* kernel memory and copy configuration data to
-* kernel space (for big firmwares)
-* Jun 02, 1999 Gideon Hack Updates for Linux 2.0.X and 2.2.X kernels.
-*****************************************************************************/
-
-#include <linux/stddef.h> /* offsetof(), etc. */
-#include <linux/capability.h>
-#include <linux/errno.h> /* return codes */
-#include <linux/kernel.h>
-#include <linux/module.h> /* support for loadable modules */
-#include <linux/slab.h> /* kmalloc(), kfree() */
-#include <linux/mutex.h>
-#include <linux/mm.h>
-#include <linux/string.h> /* inline mem*, str* functions */
-
-#include <asm/byteorder.h> /* htons(), etc. */
-#include <linux/wanrouter.h> /* WAN router API definitions */
-
-#include <linux/vmalloc.h> /* vmalloc, vfree */
-#include <asm/uaccess.h> /* copy_to/from_user */
-#include <linux/init.h> /* __initfunc et al. */
-
-#define DEV_TO_SLAVE(dev) (*((struct net_device **)netdev_priv(dev)))
-
-/*
- * Function Prototypes
- */
-
-/*
- * WAN device IOCTL handlers
- */
-
-static DEFINE_MUTEX(wanrouter_mutex);
-static int wanrouter_device_setup(struct wan_device *wandev,
- wandev_conf_t __user *u_conf);
-static int wanrouter_device_stat(struct wan_device *wandev,
- wandev_stat_t __user *u_stat);
-static int wanrouter_device_shutdown(struct wan_device *wandev);
-static int wanrouter_device_new_if(struct wan_device *wandev,
- wanif_conf_t __user *u_conf);
-static int wanrouter_device_del_if(struct wan_device *wandev,
- char __user *u_name);
-
-/*
- * Miscellaneous
- */
-
-static struct wan_device *wanrouter_find_device(char *name);
-static int wanrouter_delete_interface(struct wan_device *wandev, char *name);
-static void lock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags)
- __acquires(lock);
-static void unlock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags)
- __releases(lock);
-
-
-
-/*
- * Global Data
- */
-
-static char wanrouter_fullname[] = "Sangoma WANPIPE Router";
-static char wanrouter_copyright[] = "(c) 1995-2000 Sangoma Technologies Inc.";
-static char wanrouter_modname[] = ROUTER_NAME; /* short module name */
-struct wan_device* wanrouter_router_devlist; /* list of registered devices */
-
-/*
- * Organize Unique Identifiers for encapsulation/decapsulation
- */
-
-#if 0
-static unsigned char wanrouter_oui_ether[] = { 0x00, 0x00, 0x00 };
-static unsigned char wanrouter_oui_802_2[] = { 0x00, 0x80, 0xC2 };
-#endif
-
-static int __init wanrouter_init(void)
-{
- int err;
-
- printk(KERN_INFO "%s v%u.%u %s\n",
- wanrouter_fullname, ROUTER_VERSION, ROUTER_RELEASE,
- wanrouter_copyright);
-
- err = wanrouter_proc_init();
- if (err)
- printk(KERN_INFO "%s: can't create entry in proc filesystem!\n",
- wanrouter_modname);
-
- return err;
-}
-
-static void __exit wanrouter_cleanup (void)
-{
- wanrouter_proc_cleanup();
-}
-
-/*
- * This is just plain dumb. We should move the bugger to drivers/net/wan,
- * slap it first in directory and make it module_init(). The only reason
- * for subsys_initcall() here is that net goes after drivers (why, BTW?)
- */
-subsys_initcall(wanrouter_init);
-module_exit(wanrouter_cleanup);
-
-/*
- * Kernel APIs
- */
-
-/*
- * Register WAN device.
- * o verify device credentials
- * o create an entry for the device in the /proc/net/router directory
- * o initialize internally maintained fields of the wan_device structure
- * o link device data space to a singly-linked list
- * o if it's the first device, then start kernel 'thread'
- * o increment module use count
- *
- * Return:
- * 0 Ok
- * < 0 error.
- *
- * Context: process
- */
-
-
-int register_wan_device(struct wan_device *wandev)
-{
- int err, namelen;
-
- if ((wandev == NULL) || (wandev->magic != ROUTER_MAGIC) ||
- (wandev->name == NULL))
- return -EINVAL;
-
- namelen = strlen(wandev->name);
- if (!namelen || (namelen > WAN_DRVNAME_SZ))
- return -EINVAL;
-
- if (wanrouter_find_device(wandev->name))
- return -EEXIST;
-
-#ifdef WANDEBUG
- printk(KERN_INFO "%s: registering WAN device %s\n",
- wanrouter_modname, wandev->name);
-#endif
-
- /*
- * Register /proc directory entry
- */
- err = wanrouter_proc_add(wandev);
- if (err) {
- printk(KERN_INFO
- "%s: can't create /proc/net/router/%s entry!\n",
- wanrouter_modname, wandev->name);
- return err;
- }
-
- /*
- * Initialize fields of the wan_device structure maintained by the
- * router and update local data.
- */
-
- wandev->ndev = 0;
- wandev->dev = NULL;
- wandev->next = wanrouter_router_devlist;
- wanrouter_router_devlist = wandev;
- return 0;
-}
-
-/*
- * Unregister WAN device.
- * o shut down device
- * o unlink device data space from the linked list
- * o delete device entry in the /proc/net/router directory
- * o decrement module use count
- *
- * Return: 0 Ok
- * <0 error.
- * Context: process
- */
-
-
-int unregister_wan_device(char *name)
-{
- struct wan_device *wandev, *prev;
-
- if (name == NULL)
- return -EINVAL;
-
- for (wandev = wanrouter_router_devlist, prev = NULL;
- wandev && strcmp(wandev->name, name);
- prev = wandev, wandev = wandev->next)
- ;
- if (wandev == NULL)
- return -ENODEV;
-
-#ifdef WANDEBUG
- printk(KERN_INFO "%s: unregistering WAN device %s\n",
- wanrouter_modname, name);
-#endif
-
- if (wandev->state != WAN_UNCONFIGURED)
- wanrouter_device_shutdown(wandev);
-
- if (prev)
- prev->next = wandev->next;
- else
- wanrouter_router_devlist = wandev->next;
-
- wanrouter_proc_delete(wandev);
- return 0;
-}
-
-#if 0
-
-/*
- * Encapsulate packet.
- *
- * Return: encapsulation header size
- * < 0 - unsupported Ethertype
- *
- * Notes:
- * 1. This function may be called on interrupt context.
- */
-
-
-int wanrouter_encapsulate(struct sk_buff *skb, struct net_device *dev,
- unsigned short type)
-{
- int hdr_len = 0;
-
- switch (type) {
- case ETH_P_IP: /* IP datagram encapsulation */
- hdr_len += 1;
- skb_push(skb, 1);
- skb->data[0] = NLPID_IP;
- break;
-
- case ETH_P_IPX: /* SNAP encapsulation */
- case ETH_P_ARP:
- hdr_len += 7;
- skb_push(skb, 7);
- skb->data[0] = 0;
- skb->data[1] = NLPID_SNAP;
- skb_copy_to_linear_data_offset(skb, 2, wanrouter_oui_ether,
- sizeof(wanrouter_oui_ether));
- *((unsigned short*)&skb->data[5]) = htons(type);
- break;
-
- default: /* Unknown packet type */
- printk(KERN_INFO
- "%s: unsupported Ethertype 0x%04X on interface %s!\n",
- wanrouter_modname, type, dev->name);
- hdr_len = -EINVAL;
- }
- return hdr_len;
-}
-
-
-/*
- * Decapsulate packet.
- *
- * Return: Ethertype (in network order)
- * 0 unknown encapsulation
- *
- * Notes:
- * 1. This function may be called on interrupt context.
- */
-
-
-__be16 wanrouter_type_trans(struct sk_buff *skb, struct net_device *dev)
-{
- int cnt = skb->data[0] ? 0 : 1; /* there may be a pad present */
- __be16 ethertype;
-
- switch (skb->data[cnt]) {
- case NLPID_IP: /* IP datagramm */
- ethertype = htons(ETH_P_IP);
- cnt += 1;
- break;
-
- case NLPID_SNAP: /* SNAP encapsulation */
- if (memcmp(&skb->data[cnt + 1], wanrouter_oui_ether,
- sizeof(wanrouter_oui_ether))){
- printk(KERN_INFO
- "%s: unsupported SNAP OUI %02X-%02X-%02X "
- "on interface %s!\n", wanrouter_modname,
- skb->data[cnt+1], skb->data[cnt+2],
- skb->data[cnt+3], dev->name);
- return 0;
- }
- ethertype = *((__be16*)&skb->data[cnt+4]);
- cnt += 6;
- break;
-
- /* add other protocols, e.g. CLNP, ESIS, ISIS, if needed */
-
- default:
- printk(KERN_INFO
- "%s: unsupported NLPID 0x%02X on interface %s!\n",
- wanrouter_modname, skb->data[cnt], dev->name);
- return 0;
- }
- skb->protocol = ethertype;
- skb->pkt_type = PACKET_HOST; /* Physically point to point */
- skb_pull(skb, cnt);
- skb_reset_mac_header(skb);
- return ethertype;
-}
-
-#endif /* 0 */
-
-/*
- * WAN device IOCTL.
- * o find WAN device associated with this node
- * o execute requested action or pass command to the device driver
- */
-
-long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- struct inode *inode = file->f_path.dentry->d_inode;
- int err = 0;
- struct proc_dir_entry *dent;
- struct wan_device *wandev;
- void __user *data = (void __user *)arg;
-
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
- if ((cmd >> 8) != ROUTER_IOCTL)
- return -EINVAL;
-
- dent = PDE(inode);
- if ((dent == NULL) || (dent->data == NULL))
- return -EINVAL;
-
- wandev = dent->data;
- if (wandev->magic != ROUTER_MAGIC)
- return -EINVAL;
-
- mutex_lock(&wanrouter_mutex);
- switch (cmd) {
- case ROUTER_SETUP:
- err = wanrouter_device_setup(wandev, data);
- break;
-
- case ROUTER_DOWN:
- err = wanrouter_device_shutdown(wandev);
- break;
-
- case ROUTER_STAT:
- err = wanrouter_device_stat(wandev, data);
- break;
-
- case ROUTER_IFNEW:
- err = wanrouter_device_new_if(wandev, data);
- break;
-
- case ROUTER_IFDEL:
- err = wanrouter_device_del_if(wandev, data);
- break;
-
- case ROUTER_IFSTAT:
- break;
-
- default:
- if ((cmd >= ROUTER_USER) &&
- (cmd <= ROUTER_USER_MAX) &&
- wandev->ioctl)
- err = wandev->ioctl(wandev, cmd, arg);
- else err = -EINVAL;
- }
- mutex_unlock(&wanrouter_mutex);
- return err;
-}
-
-/*
- * WAN Driver IOCTL Handlers
- */
-
-/*
- * Setup WAN link device.
- * o verify user address space
- * o allocate kernel memory and copy configuration data to kernel space
- * o if configuration data includes extension, copy it to kernel space too
- * o call driver's setup() entry point
- */
-
-static int wanrouter_device_setup(struct wan_device *wandev,
- wandev_conf_t __user *u_conf)
-{
- void *data = NULL;
- wandev_conf_t *conf;
- int err = -EINVAL;
-
- if (wandev->setup == NULL) { /* Nothing to do ? */
- printk(KERN_INFO "%s: ERROR, No setup script: wandev->setup()\n",
- wandev->name);
- return 0;
- }
-
- conf = kmalloc(sizeof(wandev_conf_t), GFP_KERNEL);
- if (conf == NULL){
- printk(KERN_INFO "%s: ERROR, Failed to allocate kernel memory !\n",
- wandev->name);
- return -ENOBUFS;
- }
-
- if (copy_from_user(conf, u_conf, sizeof(wandev_conf_t))) {
- printk(KERN_INFO "%s: Failed to copy user config data to kernel space!\n",
- wandev->name);
- kfree(conf);
- return -EFAULT;
- }
-
- if (conf->magic != ROUTER_MAGIC) {
- kfree(conf);
- printk(KERN_INFO "%s: ERROR, Invalid MAGIC Number\n",
- wandev->name);
- return -EINVAL;
- }
-
- if (conf->data_size && conf->data) {
- if (conf->data_size > 128000) {
- printk(KERN_INFO
- "%s: ERROR, Invalid firmware data size %i !\n",
- wandev->name, conf->data_size);
- kfree(conf);
- return -EINVAL;
- }
-
- data = vmalloc(conf->data_size);
- if (!data) {
- printk(KERN_INFO
- "%s: ERROR, Failed allocate kernel memory !\n",
- wandev->name);
- kfree(conf);
- return -ENOBUFS;
- }
- if (!copy_from_user(data, conf->data, conf->data_size)) {
- conf->data = data;
- err = wandev->setup(wandev, conf);
- } else {
- printk(KERN_INFO
- "%s: ERROR, Failed to copy from user data !\n",
- wandev->name);
- err = -EFAULT;
- }
- vfree(data);
- } else {
- printk(KERN_INFO
- "%s: ERROR, No firmware found ! Firmware size = %i !\n",
- wandev->name, conf->data_size);
- }
-
- kfree(conf);
- return err;
-}
-
-/*
- * Shutdown WAN device.
- * o delete all not opened logical channels for this device
- * o call driver's shutdown() entry point
- */
-
-static int wanrouter_device_shutdown(struct wan_device *wandev)
-{
- struct net_device *dev;
- int err=0;
-
- if (wandev->state == WAN_UNCONFIGURED)
- return 0;
-
- printk(KERN_INFO "\n%s: Shutting Down!\n",wandev->name);
-
- for (dev = wandev->dev; dev;) {
- err = wanrouter_delete_interface(wandev, dev->name);
- if (err)
- return err;
- /* The above function deallocates the current dev
- * structure. Therefore, we cannot use netdev_priv(dev)
- * as the next element: wandev->dev points to the
- * next element */
- dev = wandev->dev;
- }
-
- if (wandev->ndev)
- return -EBUSY; /* there are opened interfaces */
-
- if (wandev->shutdown)
- err=wandev->shutdown(wandev);
-
- return err;
-}
-
-/*
- * Get WAN device status & statistics.
- */
-
-static int wanrouter_device_stat(struct wan_device *wandev,
- wandev_stat_t __user *u_stat)
-{
- wandev_stat_t stat;
-
- memset(&stat, 0, sizeof(stat));
-
- /* Ask device driver to update device statistics */
- if ((wandev->state != WAN_UNCONFIGURED) && wandev->update)
- wandev->update(wandev);
-
- /* Fill out structure */
- stat.ndev = wandev->ndev;
- stat.state = wandev->state;
-
- if (copy_to_user(u_stat, &stat, sizeof(stat)))
- return -EFAULT;
-
- return 0;
-}
-
-/*
- * Create new WAN interface.
- * o verify user address space
- * o copy configuration data to kernel address space
- * o allocate network interface data space
- * o call driver's new_if() entry point
- * o make sure there is no interface name conflict
- * o register network interface
- */
-
-static int wanrouter_device_new_if(struct wan_device *wandev,
- wanif_conf_t __user *u_conf)
-{
- wanif_conf_t *cnf;
- struct net_device *dev = NULL;
- int err;
-
- if ((wandev->state == WAN_UNCONFIGURED) || (wandev->new_if == NULL))
- return -ENODEV;
-
- cnf = kmalloc(sizeof(wanif_conf_t), GFP_KERNEL);
- if (!cnf)
- return -ENOBUFS;
-
- err = -EFAULT;
- if (copy_from_user(cnf, u_conf, sizeof(wanif_conf_t)))
- goto out;
-
- err = -EINVAL;
- if (cnf->magic != ROUTER_MAGIC)
- goto out;
-
- if (cnf->config_id == WANCONFIG_MPPP) {
- printk(KERN_INFO "%s: Wanpipe Mulit-Port PPP support has not been compiled in!\n",
- wandev->name);
- err = -EPROTONOSUPPORT;
- goto out;
- } else {
- err = wandev->new_if(wandev, dev, cnf);
- }
-
- if (!err) {
- /* Register network interface. This will invoke init()
- * function supplied by the driver. If device registered
- * successfully, add it to the interface list.
- */
-
-#ifdef WANDEBUG
- printk(KERN_INFO "%s: registering interface %s...\n",
- wanrouter_modname, dev->name);
-#endif
-
- err = register_netdev(dev);
- if (!err) {
- struct net_device *slave = NULL;
- unsigned long smp_flags=0;
-
- lock_adapter_irq(&wandev->lock, &smp_flags);
-
- if (wandev->dev == NULL) {
- wandev->dev = dev;
- } else {
- for (slave=wandev->dev;
- DEV_TO_SLAVE(slave);
- slave = DEV_TO_SLAVE(slave))
- DEV_TO_SLAVE(slave) = dev;
- }
- ++wandev->ndev;
-
- unlock_adapter_irq(&wandev->lock, &smp_flags);
- err = 0; /* done !!! */
- goto out;
- }
- if (wandev->del_if)
- wandev->del_if(wandev, dev);
- free_netdev(dev);
- }
-
-out:
- kfree(cnf);
- return err;
-}
-
-
-/*
- * Delete WAN logical channel.
- * o verify user address space
- * o copy configuration data to kernel address space
- */
-
-static int wanrouter_device_del_if(struct wan_device *wandev, char __user *u_name)
-{
- char name[WAN_IFNAME_SZ + 1];
- int err = 0;
-
- if (wandev->state == WAN_UNCONFIGURED)
- return -ENODEV;
-
- memset(name, 0, sizeof(name));
-
- if (copy_from_user(name, u_name, WAN_IFNAME_SZ))
- return -EFAULT;
-
- err = wanrouter_delete_interface(wandev, name);
- if (err)
- return err;
-
- /* If last interface being deleted, shutdown card
- * This helps with administration at leaf nodes
- * (You can tell if the person at the other end of the phone
- * has an interface configured) and avoids DoS vulnerabilities
- * in binary driver files - this fixes a problem with the current
- * Sangoma driver going into strange states when all the network
- * interfaces are deleted and the link irrecoverably disconnected.
- */
-
- if (!wandev->ndev && wandev->shutdown)
- err = wandev->shutdown(wandev);
-
- return err;
-}
-
-/*
- * Miscellaneous Functions
- */
-
-/*
- * Find WAN device by name.
- * Return pointer to the WAN device data space or NULL if device not found.
- */
-
-static struct wan_device *wanrouter_find_device(char *name)
-{
- struct wan_device *wandev;
-
- for (wandev = wanrouter_router_devlist;
- wandev && strcmp(wandev->name, name);
- wandev = wandev->next);
- return wandev;
-}
-
-/*
- * Delete WAN logical channel identified by its name.
- * o find logical channel by its name
- * o call driver's del_if() entry point
- * o unregister network interface
- * o unlink channel data space from linked list of channels
- * o release channel data space
- *
- * Return: 0 success
- * -ENODEV channel not found.
- * -EBUSY interface is open
- *
- * Note: If (force != 0), then device will be destroyed even if interface
- * associated with it is open. It's caller's responsibility to make
- * sure that opened interfaces are not removed!
- */
-
-static int wanrouter_delete_interface(struct wan_device *wandev, char *name)
-{
- struct net_device *dev = NULL, *prev = NULL;
- unsigned long smp_flags=0;
-
- lock_adapter_irq(&wandev->lock, &smp_flags);
- dev = wandev->dev;
- prev = NULL;
- while (dev && strcmp(name, dev->name)) {
- struct net_device **slave = netdev_priv(dev);
- prev = dev;
- dev = *slave;
- }
- unlock_adapter_irq(&wandev->lock, &smp_flags);
-
- if (dev == NULL)
- return -ENODEV; /* interface not found */
-
- if (netif_running(dev))
- return -EBUSY; /* interface in use */
-
- if (wandev->del_if)
- wandev->del_if(wandev, dev);
-
- lock_adapter_irq(&wandev->lock, &smp_flags);
- if (prev) {
- struct net_device **prev_slave = netdev_priv(prev);
- struct net_device **slave = netdev_priv(dev);
-
- *prev_slave = *slave;
- } else {
- struct net_device **slave = netdev_priv(dev);
- wandev->dev = *slave;
- }
- --wandev->ndev;
- unlock_adapter_irq(&wandev->lock, &smp_flags);
-
- printk(KERN_INFO "%s: unregistering '%s'\n", wandev->name, dev->name);
-
- unregister_netdev(dev);
-
- free_netdev(dev);
-
- return 0;
-}
-
-static void lock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags)
- __acquires(lock)
-{
- spin_lock_irqsave(lock, *smp_flags);
-}
-
-
-static void unlock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags)
- __releases(lock)
-{
- spin_unlock_irqrestore(lock, *smp_flags);
-}
-
-EXPORT_SYMBOL(register_wan_device);
-EXPORT_SYMBOL(unregister_wan_device);
-
-MODULE_LICENSE("GPL");
-
-/*
- * End
- */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 06:38:39 +0000