diff options
Diffstat (limited to 'net/wireless/mesh.c')
| -rw-r--r-- | net/wireless/mesh.c | 121 |
1 files changed, 118 insertions, 3 deletions
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index 2749cb86b46..c384e77ff77 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -14,6 +14,9 @@ #define MESH_PATH_TIMEOUT 5000 #define MESH_RANN_INTERVAL 5000 +#define MESH_PATH_TO_ROOT_TIMEOUT 6000 +#define MESH_ROOT_INTERVAL 5000 +#define MESH_ROOT_CONFIRMATION_INTERVAL 2000 /* * Minimum interval between two consecutive PREQs originated by the same @@ -62,9 +65,15 @@ const struct mesh_config default_mesh_config = { .dot11MeshForwarding = true, .rssi_threshold = MESH_RSSI_THRESHOLD, .ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED, + .dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT, + .dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL, + .dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL, }; const struct mesh_setup default_mesh_setup = { + /* cfg80211_join_mesh() will pick a channel if needed */ + .channel = NULL, + .channel_type = NL80211_CHAN_NO_HT, .sync_method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET, .path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP, .path_metric = IEEE80211_PATH_METRIC_AIRTIME, @@ -75,7 +84,7 @@ const struct mesh_setup default_mesh_setup = { int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, struct net_device *dev, - const struct mesh_setup *setup, + struct mesh_setup *setup, const struct mesh_config *conf) { struct wireless_dev *wdev = dev->ieee80211_ptr; @@ -101,10 +110,61 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, if (!rdev->ops->join_mesh) return -EOPNOTSUPP; + if (!setup->channel) { + /* if no channel explicitly given, use preset channel */ + setup->channel = wdev->preset_chan; + setup->channel_type = wdev->preset_chantype; + } + + if (!setup->channel) { + /* if we don't have that either, use the first usable channel */ + enum ieee80211_band band; + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + struct ieee80211_supported_band *sband; + struct ieee80211_channel *chan; + int i; + + sband = rdev->wiphy.bands[band]; + if (!sband) + continue; + + for (i = 0; i < sband->n_channels; i++) { + chan = &sband->channels[i]; + if (chan->flags & (IEEE80211_CHAN_NO_IBSS | + IEEE80211_CHAN_PASSIVE_SCAN | + IEEE80211_CHAN_DISABLED | + IEEE80211_CHAN_RADAR)) + continue; + setup->channel = chan; + break; + } + + if (setup->channel) + break; + } + + /* no usable channel ... */ + if (!setup->channel) + return -EINVAL; + + setup->channel_type = NL80211_CHAN_NO_HT; + } + + if (!cfg80211_can_beacon_sec_chan(&rdev->wiphy, setup->channel, + setup->channel_type)) + return -EINVAL; + + err = cfg80211_can_use_chan(rdev, wdev, setup->channel, + CHAN_MODE_SHARED); + if (err) + return err; + err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, setup); if (!err) { memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len); wdev->mesh_id_len = setup->mesh_id_len; + wdev->channel = setup->channel; } return err; @@ -112,19 +172,71 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, struct net_device *dev, - const struct mesh_setup *setup, + struct mesh_setup *setup, const struct mesh_config *conf) { struct wireless_dev *wdev = dev->ieee80211_ptr; int err; + mutex_lock(&rdev->devlist_mtx); wdev_lock(wdev); err = __cfg80211_join_mesh(rdev, dev, setup, conf); wdev_unlock(wdev); + mutex_unlock(&rdev->devlist_mtx); return err; } +int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev, + struct wireless_dev *wdev, int freq, + enum nl80211_channel_type channel_type) +{ + struct ieee80211_channel *channel; + int err; + + channel = rdev_freq_to_chan(rdev, freq, channel_type); + if (!channel || !cfg80211_can_beacon_sec_chan(&rdev->wiphy, + channel, + channel_type)) { + return -EINVAL; + } + + /* + * Workaround for libertas (only!), it puts the interface + * into mesh mode but doesn't implement join_mesh. Instead, + * it is configured via sysfs and then joins the mesh when + * you set the channel. Note that the libertas mesh isn't + * compatible with 802.11 mesh. + */ + if (rdev->ops->libertas_set_mesh_channel) { + if (channel_type != NL80211_CHAN_NO_HT) + return -EINVAL; + + if (!netif_running(wdev->netdev)) + return -ENETDOWN; + + err = cfg80211_can_use_chan(rdev, wdev, channel, + CHAN_MODE_SHARED); + if (err) + return err; + + err = rdev->ops->libertas_set_mesh_channel(&rdev->wiphy, + wdev->netdev, + channel); + if (!err) + wdev->channel = channel; + + return err; + } + + if (wdev->mesh_id_len) + return -EBUSY; + + wdev->preset_chan = channel; + wdev->preset_chantype = channel_type; + return 0; +} + void cfg80211_notify_new_peer_candidate(struct net_device *dev, const u8 *macaddr, const u8* ie, u8 ie_len, gfp_t gfp) { @@ -156,8 +268,11 @@ static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev, return -ENOTCONN; err = rdev->ops->leave_mesh(&rdev->wiphy, dev); - if (!err) + if (!err) { wdev->mesh_id_len = 0; + wdev->channel = NULL; + } + return err; } |