summaryrefslogtreecommitdiffstats
path: root/net/wireless
diff options
context:
space:
mode:
Diffstat (limited to 'net/wireless')
-rw-r--r--net/wireless/core.c43
-rw-r--r--net/wireless/core.h6
-rw-r--r--net/wireless/lib80211_crypt_ccmp.c2
-rw-r--r--net/wireless/lib80211_crypt_tkip.c23
-rw-r--r--net/wireless/nl80211.c134
-rw-r--r--net/wireless/reg.c480
-rw-r--r--net/wireless/reg.h29
-rw-r--r--net/wireless/scan.c158
-rw-r--r--net/wireless/sme.c42
-rw-r--r--net/wireless/sysfs.c20
-rw-r--r--net/wireless/util.c5
-rw-r--r--net/wireless/wext-compat.c34
-rw-r--r--net/wireless/wext-proc.c4
13 files changed, 862 insertions, 118 deletions
diff --git a/net/wireless/core.c b/net/wireless/core.c
index c2a2c563d21..71b6b3a9cf1 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -1,7 +1,7 @@
/*
* This is the linux wireless configuration interface.
*
- * Copyright 2006-2009 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
*/
#include <linux/if.h>
@@ -31,15 +31,10 @@ MODULE_AUTHOR("Johannes Berg");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("wireless configuration support");
-/* RCU might be appropriate here since we usually
- * only read the list, and that can happen quite
- * often because we need to do it for each command */
+/* RCU-protected (and cfg80211_mutex for writers) */
LIST_HEAD(cfg80211_rdev_list);
int cfg80211_rdev_list_generation;
-/*
- * This is used to protect the cfg80211_rdev_list
- */
DEFINE_MUTEX(cfg80211_mutex);
/* for debugfs */
@@ -402,6 +397,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
rdev->wiphy.retry_long = 4;
rdev->wiphy.frag_threshold = (u32) -1;
rdev->wiphy.rts_threshold = (u32) -1;
+ rdev->wiphy.coverage_class = 0;
return &rdev->wiphy;
}
@@ -417,6 +413,18 @@ int wiphy_register(struct wiphy *wiphy)
int i;
u16 ifmodes = wiphy->interface_modes;
+ if (WARN_ON(wiphy->addresses && !wiphy->n_addresses))
+ return -EINVAL;
+
+ if (WARN_ON(wiphy->addresses &&
+ !is_zero_ether_addr(wiphy->perm_addr) &&
+ memcmp(wiphy->perm_addr, wiphy->addresses[0].addr,
+ ETH_ALEN)))
+ return -EINVAL;
+
+ if (wiphy->addresses)
+ memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN);
+
/* sanity check ifmodes */
WARN_ON(!ifmodes);
ifmodes &= ((1 << __NL80211_IFTYPE_AFTER_LAST) - 1) & ~1;
@@ -476,7 +484,7 @@ int wiphy_register(struct wiphy *wiphy)
/* set up regulatory info */
wiphy_update_regulatory(wiphy, NL80211_REGDOM_SET_BY_CORE);
- list_add(&rdev->list, &cfg80211_rdev_list);
+ list_add_rcu(&rdev->list, &cfg80211_rdev_list);
cfg80211_rdev_list_generation++;
mutex_unlock(&cfg80211_mutex);
@@ -553,7 +561,8 @@ void wiphy_unregister(struct wiphy *wiphy)
* it impossible to find from userspace.
*/
debugfs_remove_recursive(rdev->wiphy.debugfsdir);
- list_del(&rdev->list);
+ list_del_rcu(&rdev->list);
+ synchronize_rcu();
/*
* Try to grab rdev->mtx. If a command is still in progress,
@@ -669,7 +678,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
INIT_LIST_HEAD(&wdev->event_list);
spin_lock_init(&wdev->event_lock);
mutex_lock(&rdev->devlist_mtx);
- list_add(&wdev->list, &rdev->netdev_list);
+ list_add_rcu(&wdev->list, &rdev->netdev_list);
rdev->devlist_generation++;
/* can only change netns with wiphy */
dev->features |= NETIF_F_NETNS_LOCAL;
@@ -745,9 +754,9 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
mutex_unlock(&rdev->devlist_mtx);
dev_put(dev);
}
-#ifdef CONFIG_CFG80211_WEXT
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+#ifdef CONFIG_CFG80211_WEXT
wdev_lock(wdev);
switch (wdev->iftype) {
case NL80211_IFTYPE_ADHOC:
@@ -760,10 +769,10 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
break;
}
wdev_unlock(wdev);
+#endif
rdev->opencount++;
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
-#endif
break;
case NETDEV_UNREGISTER:
/*
@@ -781,13 +790,21 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
*/
if (!list_empty(&wdev->list)) {
sysfs_remove_link(&dev->dev.kobj, "phy80211");
- list_del_init(&wdev->list);
+ list_del_rcu(&wdev->list);
rdev->devlist_generation++;
#ifdef CONFIG_CFG80211_WEXT
kfree(wdev->wext.keys);
#endif
}
mutex_unlock(&rdev->devlist_mtx);
+ /*
+ * synchronise (so that we won't find this netdev
+ * from other code any more) and then clear the list
+ * head so that the above code can safely check for
+ * !list_empty() to avoid double-cleanup.
+ */
+ synchronize_rcu();
+ INIT_LIST_HEAD(&wdev->list);
break;
case NETDEV_PRE_UP:
if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype)))
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 30ec95f05b5..c326a667022 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -1,7 +1,7 @@
/*
* Wireless configuration interface internals.
*
- * Copyright 2006-2009 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
*/
#ifndef __NET_WIRELESS_CORE_H
#define __NET_WIRELESS_CORE_H
@@ -48,6 +48,7 @@ struct cfg80211_registered_device {
/* associate netdev list */
struct mutex devlist_mtx;
+ /* protected by devlist_mtx or RCU */
struct list_head netdev_list;
int devlist_generation;
int opencount; /* also protected by devlist_mtx */
@@ -111,7 +112,8 @@ struct cfg80211_internal_bss {
unsigned long ts;
struct kref ref;
atomic_t hold;
- bool ies_allocated;
+ bool beacon_ies_allocated;
+ bool proberesp_ies_allocated;
/* must be last because of priv member */
struct cfg80211_bss pub;
diff --git a/net/wireless/lib80211_crypt_ccmp.c b/net/wireless/lib80211_crypt_ccmp.c
index 2301dc1edc4..b7fa31d5fd1 100644
--- a/net/wireless/lib80211_crypt_ccmp.c
+++ b/net/wireless/lib80211_crypt_ccmp.c
@@ -237,7 +237,6 @@ static int lib80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
return -1;
pos = skb->data + hdr_len + CCMP_HDR_LEN;
- mic = skb_put(skb, CCMP_MIC_LEN);
hdr = (struct ieee80211_hdr *)skb->data;
ccmp_init_blocks(key->tfm, hdr, key->tx_pn, data_len, b0, b, s0);
@@ -257,6 +256,7 @@ static int lib80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
pos += len;
}
+ mic = skb_put(skb, CCMP_MIC_LEN);
for (i = 0; i < CCMP_MIC_LEN; i++)
mic[i] = b[i] ^ s0[i];
diff --git a/net/wireless/lib80211_crypt_tkip.c b/net/wireless/lib80211_crypt_tkip.c
index c36287399d7..8cbdb32ff31 100644
--- a/net/wireless/lib80211_crypt_tkip.c
+++ b/net/wireless/lib80211_crypt_tkip.c
@@ -36,6 +36,8 @@ MODULE_AUTHOR("Jouni Malinen");
MODULE_DESCRIPTION("lib80211 crypt: TKIP");
MODULE_LICENSE("GPL");
+#define TKIP_HDR_LEN 8
+
struct lib80211_tkip_data {
#define TKIP_KEY_LEN 32
u8 key[TKIP_KEY_LEN];
@@ -314,13 +316,12 @@ static int lib80211_tkip_hdr(struct sk_buff *skb, int hdr_len,
u8 * rc4key, int keylen, void *priv)
{
struct lib80211_tkip_data *tkey = priv;
- int len;
u8 *pos;
struct ieee80211_hdr *hdr;
hdr = (struct ieee80211_hdr *)skb->data;
- if (skb_headroom(skb) < 8 || skb->len < hdr_len)
+ if (skb_headroom(skb) < TKIP_HDR_LEN || skb->len < hdr_len)
return -1;
if (rc4key == NULL || keylen < 16)
@@ -333,9 +334,8 @@ static int lib80211_tkip_hdr(struct sk_buff *skb, int hdr_len,
}
tkip_mixing_phase2(rc4key, tkey->key, tkey->tx_ttak, tkey->tx_iv16);
- len = skb->len - hdr_len;
- pos = skb_push(skb, 8);
- memmove(pos, pos + 8, hdr_len);
+ pos = skb_push(skb, TKIP_HDR_LEN);
+ memmove(pos, pos + TKIP_HDR_LEN, hdr_len);
pos += hdr_len;
*pos++ = *rc4key;
@@ -353,7 +353,7 @@ static int lib80211_tkip_hdr(struct sk_buff *skb, int hdr_len,
tkey->tx_iv32++;
}
- return 8;
+ return TKIP_HDR_LEN;
}
static int lib80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
@@ -384,9 +384,8 @@ static int lib80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
if ((lib80211_tkip_hdr(skb, hdr_len, rc4key, 16, priv)) < 0)
return -1;
- icv = skb_put(skb, 4);
-
crc = ~crc32_le(~0, pos, len);
+ icv = skb_put(skb, 4);
icv[0] = crc;
icv[1] = crc >> 8;
icv[2] = crc >> 16;
@@ -434,7 +433,7 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
return -1;
}
- if (skb->len < hdr_len + 8 + 4)
+ if (skb->len < hdr_len + TKIP_HDR_LEN + 4)
return -1;
pos = skb->data + hdr_len;
@@ -462,7 +461,7 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
}
iv16 = (pos[0] << 8) | pos[2];
iv32 = pos[4] | (pos[5] << 8) | (pos[6] << 16) | (pos[7] << 24);
- pos += 8;
+ pos += TKIP_HDR_LEN;
if (tkip_replay_check(iv32, iv16, tkey->rx_iv32, tkey->rx_iv16)) {
#ifdef CONFIG_LIB80211_DEBUG
@@ -523,8 +522,8 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
tkey->rx_iv16_new = iv16;
/* Remove IV and ICV */
- memmove(skb->data + 8, skb->data, hdr_len);
- skb_pull(skb, 8);
+ memmove(skb->data + TKIP_HDR_LEN, skb->data, hdr_len);
+ skb_pull(skb, TKIP_HDR_LEN);
skb_trim(skb, skb->len - 4);
return keyidx;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index e3bee3cecdf..5b79ecf17be 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -69,6 +69,7 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = {
[NL80211_ATTR_WIPHY_RETRY_LONG] = { .type = NLA_U8 },
[NL80211_ATTR_WIPHY_FRAG_THRESHOLD] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_RTS_THRESHOLD] = { .type = NLA_U32 },
+ [NL80211_ATTR_WIPHY_COVERAGE_CLASS] = { .type = NLA_U8 },
[NL80211_ATTR_IFTYPE] = { .type = NLA_U32 },
[NL80211_ATTR_IFINDEX] = { .type = NLA_U32 },
@@ -143,6 +144,7 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = {
.len = WLAN_PMKID_LEN },
[NL80211_ATTR_DURATION] = { .type = NLA_U32 },
[NL80211_ATTR_COOKIE] = { .type = NLA_U64 },
+ [NL80211_ATTR_TX_RATES] = { .type = NLA_NESTED },
};
/* policy for the attributes */
@@ -444,6 +446,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
dev->wiphy.frag_threshold);
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_RTS_THRESHOLD,
dev->wiphy.rts_threshold);
+ NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_COVERAGE_CLASS,
+ dev->wiphy.coverage_class);
NLA_PUT_U8(msg, NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
dev->wiphy.max_scan_ssids);
@@ -572,6 +576,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
CMD(del_pmksa, DEL_PMKSA);
CMD(flush_pmksa, FLUSH_PMKSA);
CMD(remain_on_channel, REMAIN_ON_CHANNEL);
+ CMD(set_bitrate_mask, SET_TX_BITRATE_MASK);
if (dev->wiphy.flags & WIPHY_FLAG_NETNS_OK) {
i++;
NLA_PUT_U32(msg, i, NL80211_CMD_SET_WIPHY_NETNS);
@@ -684,6 +689,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
u32 changed;
u8 retry_short = 0, retry_long = 0;
u32 frag_threshold = 0, rts_threshold = 0;
+ u8 coverage_class = 0;
rtnl_lock();
@@ -806,9 +812,16 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
changed |= WIPHY_PARAM_RTS_THRESHOLD;
}
+ if (info->attrs[NL80211_ATTR_WIPHY_COVERAGE_CLASS]) {
+ coverage_class = nla_get_u8(
+ info->attrs[NL80211_ATTR_WIPHY_COVERAGE_CLASS]);
+ changed |= WIPHY_PARAM_COVERAGE_CLASS;
+ }
+
if (changed) {
u8 old_retry_short, old_retry_long;
u32 old_frag_threshold, old_rts_threshold;
+ u8 old_coverage_class;
if (!rdev->ops->set_wiphy_params) {
result = -EOPNOTSUPP;
@@ -819,6 +832,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
old_retry_long = rdev->wiphy.retry_long;
old_frag_threshold = rdev->wiphy.frag_threshold;
old_rts_threshold = rdev->wiphy.rts_threshold;
+ old_coverage_class = rdev->wiphy.coverage_class;
if (changed & WIPHY_PARAM_RETRY_SHORT)
rdev->wiphy.retry_short = retry_short;
@@ -828,6 +842,8 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
rdev->wiphy.frag_threshold = frag_threshold;
if (changed & WIPHY_PARAM_RTS_THRESHOLD)
rdev->wiphy.rts_threshold = rts_threshold;
+ if (changed & WIPHY_PARAM_COVERAGE_CLASS)
+ rdev->wiphy.coverage_class = coverage_class;
result = rdev->ops->set_wiphy_params(&rdev->wiphy, changed);
if (result) {
@@ -835,6 +851,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
rdev->wiphy.retry_long = old_retry_long;
rdev->wiphy.frag_threshold = old_frag_threshold;
rdev->wiphy.rts_threshold = old_rts_threshold;
+ rdev->wiphy.coverage_class = old_coverage_class;
}
}
@@ -3146,6 +3163,10 @@ static int nl80211_send_bss(struct sk_buff *msg, u32 pid, u32 seq, int flags,
NLA_PUT(msg, NL80211_BSS_INFORMATION_ELEMENTS,
res->len_information_elements,
res->information_elements);
+ if (res->beacon_ies && res->len_beacon_ies &&
+ res->beacon_ies != res->information_elements)
+ NLA_PUT(msg, NL80211_BSS_BEACON_IES,
+ res->len_beacon_ies, res->beacon_ies);
if (res->tsf)
NLA_PUT_U64(msg, NL80211_BSS_TSF, res->tsf);
if (res->beacon_interval)
@@ -3550,6 +3571,7 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev;
struct net_device *dev;
+ struct wireless_dev *wdev;
struct cfg80211_crypto_settings crypto;
struct ieee80211_channel *chan, *fixedchan;
const u8 *bssid, *ssid, *ie = NULL, *prev_bssid = NULL;
@@ -3595,7 +3617,8 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
}
mutex_lock(&rdev->devlist_mtx);
- fixedchan = rdev_fixed_channel(rdev, NULL);
+ wdev = dev->ieee80211_ptr;
+ fixedchan = rdev_fixed_channel(rdev, wdev);
if (fixedchan && chan != fixedchan) {
err = -EBUSY;
mutex_unlock(&rdev->devlist_mtx);
@@ -4423,6 +4446,109 @@ static int nl80211_cancel_remain_on_channel(struct sk_buff *skb,
return err;
}
+static u32 rateset_to_mask(struct ieee80211_supported_band *sband,
+ u8 *rates, u8 rates_len)
+{
+ u8 i;
+ u32 mask = 0;
+
+ for (i = 0; i < rates_len; i++) {
+ int rate = (rates[i] & 0x7f) * 5;
+ int ridx;
+ for (ridx = 0; ridx < sband->n_bitrates; ridx++) {
+ struct ieee80211_rate *srate =
+ &sband->bitrates[ridx];
+ if (rate == srate->bitrate) {
+ mask |= 1 << ridx;
+ break;
+ }
+ }
+ if (ridx == sband->n_bitrates)
+ return 0; /* rate not found */
+ }
+
+ return mask;
+}
+
+static struct nla_policy
+nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] __read_mostly = {
+ [NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
+ .len = NL80211_MAX_SUPP_RATES },
+};
+
+static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct nlattr *tb[NL80211_TXRATE_MAX + 1];
+ struct cfg80211_registered_device *rdev;
+ struct cfg80211_bitrate_mask mask;
+ int err, rem, i;
+ struct net_device *dev;
+ struct nlattr *tx_rates;
+ struct ieee80211_supported_band *sband;
+
+ if (info->attrs[NL80211_ATTR_TX_RATES] == NULL)
+ return -EINVAL;
+
+ rtnl_lock();
+
+ err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
+ if (err)
+ goto unlock_rtnl;
+
+ if (!rdev->ops->set_bitrate_mask) {
+ err = -EOPNOTSUPP;
+ goto unlock;
+ }
+
+ memset(&mask, 0, sizeof(mask));
+ /* Default to all rates enabled */
+ for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
+ sband = rdev->wiphy.bands[i];
+ mask.control[i].legacy =
+ sband ? (1 << sband->n_bitrates) - 1 : 0;
+ }
+
+ /*
+ * The nested attribute uses enum nl80211_band as the index. This maps
+ * directly to the enum ieee80211_band values used in cfg80211.
+ */
+ nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem)
+ {
+ enum ieee80211_band band = nla_type(tx_rates);
+ if (band < 0 || band >= IEEE80211_NUM_BANDS) {
+ err = -EINVAL;
+ goto unlock;
+ }
+ sband = rdev->wiphy.bands[band];
+ if (sband == NULL) {
+ err = -EINVAL;
+ goto unlock;
+ }
+ nla_parse(tb, NL80211_TXRATE_MAX, nla_data(tx_rates),
+ nla_len(tx_rates), nl80211_txattr_policy);
+ if (tb[NL80211_TXRATE_LEGACY]) {
+ mask.control[band].legacy = rateset_to_mask(
+ sband,
+ nla_data(tb[NL80211_TXRATE_LEGACY]),
+ nla_len(tb[NL80211_TXRATE_LEGACY]));
+ if (mask.control[band].legacy == 0) {
+ err = -EINVAL;
+ goto unlock;
+ }
+ }
+ }
+
+ err = rdev->ops->set_bitrate_mask(&rdev->wiphy, dev, NULL, &mask);
+
+ unlock:
+ dev_put(dev);
+ cfg80211_unlock_rdev(rdev);
+ unlock_rtnl:
+ rtnl_unlock();
+ return err;
+}
+
static struct genl_ops nl80211_ops[] = {
{
.cmd = NL80211_CMD_GET_WIPHY,
@@ -4697,6 +4823,12 @@ static struct genl_ops nl80211_ops[] = {
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
+ {
+ .cmd = NL80211_CMD_SET_TX_BITRATE_MASK,
+ .doit = nl80211_set_tx_bitrate_mask,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 87ea60d84c3..ed89c59bb43 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -43,6 +43,15 @@
#include "regdb.h"
#include "nl80211.h"
+#ifdef CONFIG_CFG80211_REG_DEBUG
+#define REG_DBG_PRINT(format, args...) \
+ do { \
+ printk(KERN_DEBUG format , ## args); \
+ } while (0)
+#else
+#define REG_DBG_PRINT(args...)
+#endif
+
/* Receipt of information from last regulatory request */
static struct regulatory_request *last_request;
@@ -125,6 +134,7 @@ static const struct ieee80211_regdomain *cfg80211_world_regdom =
&world_regdom;
static char *ieee80211_regdom = "00";
+static char user_alpha2[2];
module_param(ieee80211_regdom, charp, 0444);
MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code");
@@ -243,6 +253,27 @@ static bool regdom_changes(const char *alpha2)
return true;
}
+/*
+ * The NL80211_REGDOM_SET_BY_USER regdom alpha2 is cached, this lets
+ * you know if a valid regulatory hint with NL80211_REGDOM_SET_BY_USER
+ * has ever been issued.
+ */
+static bool is_user_regdom_saved(void)
+{
+ if (user_alpha2[0] == '9' && user_alpha2[1] == '7')
+ return false;
+
+ /* This would indicate a mistake on the design */
+ if (WARN((!is_world_regdom(user_alpha2) &&
+ !is_an_alpha2(user_alpha2)),
+ "Unexpected user alpha2: %c%c\n",
+ user_alpha2[0],
+ user_alpha2[1]))
+ return false;
+
+ return true;
+}
+
/**
* country_ie_integrity_changes - tells us if the country IE has changed
* @checksum: checksum of country IE of fields we are interested in
@@ -476,12 +507,212 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
}
/*
+ * This is a work around for sanity checking ieee80211_channel_to_frequency()'s
+ * work. ieee80211_channel_to_frequency() can for example currently provide a
+ * 2 GHz channel when in fact a 5 GHz channel was desired. An example would be
+ * an AP providing channel 8 on a country IE triplet when it sent this on the
+ * 5 GHz band, that channel is designed to be channel 8 on 5 GHz, not a 2 GHz
+ * channel.
+ *
+ * This can be removed once ieee80211_channel_to_frequency() takes in a band.
+ */
+static bool chan_in_band(int chan, enum ieee80211_band band)
+{
+ int center_freq = ieee80211_channel_to_frequency(chan);
+
+ switch (band) {
+ case IEEE80211_BAND_2GHZ:
+ if (center_freq <= 2484)
+ return true;
+ return false;
+ case IEEE80211_BAND_5GHZ:
+ if (center_freq >= 5005)
+ return true;
+ return false;
+ default:
+ return false;
+ }
+}
+
+/*
+ * Some APs may send a country IE triplet for each channel they
+ * support and while this is completely overkill and silly we still
+ * need to support it. We avoid making a single rule for each channel
+ * though and to help us with this we use this helper to find the
+ * actual subband end channel. These type of country IE triplet
+ * scenerios are handled then, all yielding two regulaotry rules from
+ * parsing a country IE:
+ *
+ * [1]
+ * [2]
+ * [36]
+ * [40]
+ *
+ * [1]
+ * [2-4]
+ * [5-12]
+ * [36]
+ * [40-44]
+ *
+ * [1-4]
+ * [5-7]
+ * [36-44]
+ * [48-64]
+ *
+ * [36-36]
+ * [40-40]
+ * [44-44]
+ * [48-48]
+ * [52-52]
+ * [56-56]
+ * [60-60]
+ * [64-64]
+ * [100-100]
+ * [104-104]
+ * [108-108]
+ * [112-112]
+ * [116-116]
+ * [120-120]
+ * [124-124]
+ * [128-128]
+ * [132-132]
+ * [136-136]
+ * [140-140]
+ *
+ * Returns 0 if the IE has been found to be invalid in the middle
+ * somewhere.
+ */
+static int max_subband_chan(enum ieee80211_band band,
+ int orig_cur_chan,
+ int orig_end_channel,
+ s8 orig_max_power,
+ u8 **country_ie,
+ u8 *country_ie_len)
+{
+ u8 *triplets_start = *country_ie;
+ u8 len_at_triplet = *country_ie_len;
+ int end_subband_chan = orig_end_channel;
+
+ /*
+ * We'll deal with padding for the caller unless
+ * its not immediate and we don't process any channels
+ */
+ if (*country_ie_len == 1) {
+ *country_ie += 1;
+ *country_ie_len -= 1;
+ return orig_end_channel;
+ }
+
+ /* Move to the next triplet and then start search */
+ *country_ie += 3;
+ *country_ie_len -= 3;
+
+ if (!chan_in_band(orig_cur_chan, band))
+ return 0;
+
+ while (*country_ie_len >= 3) {
+ int end_channel = 0;
+ struct ieee80211_country_ie_triplet *triplet =
+ (struct ieee80211_country_ie_triplet *) *country_ie;
+ int cur_channel = 0, next_expected_chan;
+
+ /* means last triplet is completely unrelated to this one */
+ if (triplet->ext.reg_extension_id >=
+ IEEE80211_COUNTRY_EXTENSION_ID) {
+ *country_ie -= 3;
+ *country_ie_len += 3;
+ break;
+ }
+
+ if (triplet->chans.first_channel == 0) {
+ *country_ie += 1;
+ *country_ie_len -= 1;
+ if (*country_ie_len != 0)
+ return 0;
+ break;
+ }
+
+ if (triplet->chans.num_channels == 0)
+ return 0;
+
+ /* Monitonically increasing channel order */
+ if (triplet->chans.first_channel <= end_subband_chan)
+ return 0;
+
+ if (!chan_in_band(triplet->chans.first_channel, band))
+ return 0;
+
+ /* 2 GHz */
+ if (triplet->chans.first_channel <= 14) {
+ end_channel = triplet->chans.first_channel +
+ triplet->chans.num_channels - 1;
+ }
+ else {
+ end_channel = triplet->chans.first_channel +
+ (4 * (triplet->chans.num_channels - 1));
+ }
+
+ if (!chan_in_band(end_channel, band))
+ return 0;
+
+ if (orig_max_power != triplet->chans.max_power) {
+ *country_ie -= 3;
+ *country_ie_len += 3;
+ break;
+ }
+
+ cur_channel = triplet->chans.first_channel;
+
+ /* The key is finding the right next expected channel */
+ if (band == IEEE80211_BAND_2GHZ)
+ next_expected_chan = end_subband_chan + 1;
+ else
+ next_expected_chan = end_subband_chan + 4;
+
+ if (cur_channel != next_expected_chan) {
+ *country_ie -= 3;
+ *country_ie_len += 3;
+ break;
+ }
+
+ end_subband_chan = end_channel;
+
+ /* Move to the next one */
+ *country_ie += 3;
+ *country_ie_len -= 3;
+
+ /*
+ * Padding needs to be dealt with if we processed
+ * some channels.
+ */
+ if (*country_ie_len == 1) {
+ *country_ie += 1;
+ *country_ie_len -= 1;
+ break;
+ }
+
+ /* If seen, the IE is invalid */
+ if (*country_ie_len == 2)
+ return 0;
+ }
+
+ if (end_subband_chan == orig_end_channel) {
+ *country_ie = triplets_start;
+ *country_ie_len = len_at_triplet;
+ return orig_end_channel;
+ }
+
+ return end_subband_chan;
+}
+
+/*
* Converts a country IE to a regulatory domain. A regulatory domain
* structure has a lot of information which the IE doesn't yet have,
* so for the other values we use upper max values as we will intersect
* with our userspace regulatory agent to get lower bounds.
*/
static struct ieee80211_regdomain *country_ie_2_rd(
+ enum ieee80211_band band,
u8 *country_ie,
u8 country_ie_len,
u32 *checksum)
@@ -543,10 +774,29 @@ static struct ieee80211_regdomain *country_ie_2_rd(
continue;
}
+ /*
+ * APs can add padding to make length divisible
+ * by two, required by the spec.
+ */
+ if (triplet->chans.first_channel == 0) {
+ country_ie++;
+ country_ie_len--;
+ /* This is expected to be at the very end only */
+ if (country_ie_len != 0)
+ return NULL;
+ break;
+ }
+
+ if (triplet->chans.num_channels == 0)
+ return NULL;
+
+ if (!chan_in_band(triplet->chans.first_channel, band))
+ return NULL;
+
/* 2 GHz */
- if (triplet->chans.first_channel <= 14)
+ if (band == IEEE80211_BAND_2GHZ)
end_channel = triplet->chans.first_channel +
- triplet->chans.num_channels;
+ triplet->chans.num_channels - 1;
else
/*
* 5 GHz -- For example in country IEs if the first
@@ -561,6 +811,24 @@ static struct ieee80211_regdomain *country_ie_2_rd(
(4 * (triplet->chans.num_channels - 1));
cur_channel = triplet->chans.first_channel;
+
+ /*
+ * Enhancement for APs that send a triplet for every channel
+ * or for whatever reason sends triplets with multiple channels
+ * separated when in fact they should be together.
+ */
+ end_channel = max_subband_chan(band,
+ cur_channel,
+ end_channel,
+ triplet->chans.max_power,
+ &country_ie,
+ &country_ie_len);
+ if (!end_channel)
+ return NULL;
+
+ if (!chan_in_band(end_channel, band))
+ return NULL;
+
cur_sub_max_channel = end_channel;
/* Basic sanity check */
@@ -591,10 +859,13 @@ static struct ieee80211_regdomain *country_ie_2_rd(
last_sub_max_channel = cur_sub_max_channel;
- country_ie += 3;
- country_ie_len -= 3;
num_rules++;
+ if (country_ie_len >= 3) {
+ country_ie += 3;
+ country_ie_len -= 3;
+ }
+
/*
* Note: this is not a IEEE requirement but
* simply a memory requirement
@@ -637,6 +908,12 @@ static struct ieee80211_regdomain *country_ie_2_rd(
continue;
}
+ if (triplet->chans.first_channel == 0) {
+ country_ie++;
+ country_ie_len--;
+ break;
+ }
+
reg_rule = &rd->reg_rules[i];
freq_range = &reg_rule->freq_range;
power_rule = &reg_rule->power_rule;
@@ -644,13 +921,20 @@ static struct ieee80211_regdomain *country_ie_2_rd(
reg_rule->flags = flags;
/* 2 GHz */
- if (triplet->chans.first_channel <= 14)
+ if (band == IEEE80211_BAND_2GHZ)
end_channel = triplet->chans.first_channel +
- triplet->chans.num_channels;
+ triplet->chans.num_channels -1;
else
end_channel = triplet->chans.first_channel +
(4 * (triplet->chans.num_channels - 1));
+ end_channel = max_subband_chan(band,
+ triplet->chans.first_channel,
+ end_channel,
+ triplet->chans.max_power,
+ &country_ie,
+ &country_ie_len);
+
/*
* The +10 is since the regulatory domain expects
* the actual band edge, not the center of freq for
@@ -671,12 +955,15 @@ static struct ieee80211_regdomain *country_ie_2_rd(
*/
freq_range->max_bandwidth_khz = MHZ_TO_KHZ(40);
power_rule->max_antenna_gain = DBI_TO_MBI(100);
- power_rule->max_eirp = DBM_TO_MBM(100);
+ power_rule->max_eirp = DBM_TO_MBM(triplet->chans.max_power);
- country_ie += 3;
- country_ie_len -= 3;
i++;
+ if (country_ie_len >= 3) {
+ country_ie += 3;
+ country_ie_len -= 3;
+ }
+
BUG_ON(i > NL80211_MAX_SUPP_REG_RULES);
}
@@ -972,25 +1259,21 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
if (r == -ERANGE &&
last_request->initiator ==
NL80211_REGDOM_SET_BY_COUNTRY_IE) {
-#ifdef CONFIG_CFG80211_REG_DEBUG
- printk(KERN_DEBUG "cfg80211: Leaving channel %d MHz "
+ REG_DBG_PRINT("cfg80211: Leaving channel %d MHz "
"intact on %s - no rule found in band on "
"Country IE\n",
- chan->center_freq, wiphy_name(wiphy));
-#endif
+ chan->center_freq, wiphy_name(wiphy));
} else {
/*
* In this case we know the country IE has at least one reg rule
* for the band so we respect its band definitions
*/
-#ifdef CONFIG_CFG80211_REG_DEBUG
if (last_request->initiator ==
NL80211_REGDOM_SET_BY_COUNTRY_IE)
- printk(KERN_DEBUG "cfg80211: Disabling "
+ REG_DBG_PRINT("cfg80211: Disabling "
"channel %d MHz on %s due to "
"Country IE\n",
chan->center_freq, wiphy_name(wiphy));
-#endif
flags |= IEEE80211_CHAN_DISABLED;
chan->flags = flags;
}
@@ -1385,7 +1668,7 @@ static int ignore_request(struct wiphy *wiphy,
switch (pending_request->initiator) {
case NL80211_REGDOM_SET_BY_CORE:
- return -EINVAL;
+ return 0;
case NL80211_REGDOM_SET_BY_COUNTRY_IE:
last_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
@@ -1524,6 +1807,11 @@ new_request:
pending_request = NULL;
+ if (last_request->initiator == NL80211_REGDOM_SET_BY_USER) {
+ user_alpha2[0] = last_request->alpha2[0];
+ user_alpha2[1] = last_request->alpha2[1];
+ }
+
/* When r == REG_INTERSECT we do need to call CRDA */
if (r < 0) {
/*
@@ -1643,12 +1931,16 @@ static void queue_regulatory_request(struct regulatory_request *request)
schedule_work(&reg_work);
}
-/* Core regulatory hint -- happens once during cfg80211_init() */
+/*
+ * Core regulatory hint -- happens during cfg80211_init()
+ * and when we restore regulatory settings.
+ */
static int regulatory_hint_core(const char *alpha2)
{
struct regulatory_request *request;
- BUG_ON(last_request);
+ kfree(last_request);
+ last_request = NULL;
request = kzalloc(sizeof(struct regulatory_request),
GFP_KERNEL);
@@ -1659,14 +1951,12 @@ static int regulatory_hint_core(const char *alpha2)
request->alpha2[1] = alpha2[1];
request->initiator = NL80211_REGDOM_SET_BY_CORE;
- queue_regulatory_request(request);
-
/*
* This ensures last_request is populated once modules
* come swinging in and calling regulatory hints and
* wiphy_apply_custom_regulatory().
*/
- flush_scheduled_work();
+ reg_process_hint(request);
return 0;
}
@@ -1685,7 +1975,7 @@ int regulatory_hint_user(const char *alpha2)
request->wiphy_idx = WIPHY_IDX_STALE;
request->alpha2[0] = alpha2[0];
request->alpha2[1] = alpha2[1];
- request->initiator = NL80211_REGDOM_SET_BY_USER,
+ request->initiator = NL80211_REGDOM_SET_BY_USER;
queue_regulatory_request(request);
@@ -1753,8 +2043,9 @@ static bool reg_same_country_ie_hint(struct wiphy *wiphy,
* therefore cannot iterate over the rdev list here.
*/
void regulatory_hint_11d(struct wiphy *wiphy,
- u8 *country_ie,
- u8 country_ie_len)
+ enum ieee80211_band band,
+ u8 *country_ie,
+ u8 country_ie_len)
{
struct ieee80211_regdomain *rd = NULL;
char alpha2[2];
@@ -1800,9 +2091,11 @@ void regulatory_hint_11d(struct wiphy *wiphy,
wiphy_idx_valid(last_request->wiphy_idx)))
goto out;
- rd = country_ie_2_rd(country_ie, country_ie_len, &checksum);
- if (!rd)
+ rd = country_ie_2_rd(band, country_ie, country_ie_len, &checksum);
+ if (!rd) {
+ REG_DBG_PRINT("cfg80211: Ignoring bogus country IE\n");
goto out;
+ }
/*
* This will not happen right now but we leave it here for the
@@ -1845,6 +2138,123 @@ out:
mutex_unlock(&reg_mutex);
}
+static void restore_alpha2(char *alpha2, bool reset_user)
+{
+ /* indicates there is no alpha2 to consider for restoration */
+ alpha2[0] = '9';
+ alpha2[1] = '7';
+
+ /* The user setting has precedence over the module parameter */
+ if (is_user_regdom_saved()) {
+ /* Unless we're asked to ignore it and reset it */
+ if (reset_user) {
+ REG_DBG_PRINT("cfg80211: Restoring regulatory settings "
+ "including user preference\n");
+ user_alpha2[0] = '9';
+ user_alpha2[1] = '7';
+
+ /*
+ * If we're ignoring user settings, we still need to
+ * check the module parameter to ensure we put things
+ * back as they were for a full restore.
+ */
+ if (!is_world_regdom(ieee80211_regdom)) {
+ REG_DBG_PRINT("cfg80211: Keeping preference on "
+ "module parameter ieee80211_regdom: %c%c\n",
+ ieee80211_regdom[0],
+ ieee80211_regdom[1]);
+ alpha2[0] = ieee80211_regdom[0];
+ alpha2[1] = ieee80211_regdom[1];
+ }
+ } else {
+ REG_DBG_PRINT("cfg80211: Restoring regulatory settings "
+ "while preserving user preference for: %c%c\n",
+ user_alpha2[0],
+ user_alpha2[1]);
+ alpha2[0] = user_alpha2[0];
+ alpha2[1] = user_alpha2[1];
+ }
+ } else if (!is_world_regdom(ieee80211_regdom)) {
+ REG_DBG_PRINT("cfg80211: Keeping preference on "
+ "module parameter ieee80211_regdom: %c%c\n",
+ ieee80211_regdom[0],
+ ieee80211_regdom[1]);
+ alpha2[0] = ieee80211_regdom[0];
+ alpha2[1] = ieee80211_regdom[1];
+ } else
+ REG_DBG_PRINT("cfg80211: Restoring regulatory settings\n");
+}
+
+/*
+ * Restoring regulatory settings involves ingoring any
+ * possibly stale country IE information and user regulatory
+ * settings if so desired, this includes any beacon hints
+ * learned as we could have traveled outside to another country
+ * after disconnection. To restore regulatory settings we do
+ * exactly what we did at bootup:
+ *
+ * - send a core regulatory hint
+ * - send a user regulatory hint if applicable
+ *
+ * Device drivers that send a regulatory hint for a specific country
+ * keep their own regulatory domain on wiphy->regd so that does does
+ * not need to be remembered.
+ */
+static void restore_regulatory_settings(bool reset_user)
+{
+ char alpha2[2];
+ struct reg_beacon *reg_beacon, *btmp;
+
+ mutex_lock(&cfg80211_mutex);
+ mutex_lock(&reg_mutex);
+
+ reset_regdomains();
+ restore_alpha2(alpha2, reset_user);
+
+ /* Clear beacon hints */
+ spin_lock_bh(&reg_pending_beacons_lock);
+ if (!list_empty(&reg_pending_beacons)) {
+ list_for_each_entry_safe(reg_beacon, btmp,
+ &reg_pending_beacons, list) {
+ list_del(&reg_beacon->list);
+ kfree(reg_beacon);
+ }
+ }
+ spin_unlock_bh(&reg_pending_beacons_lock);
+
+ if (!list_empty(&reg_beacon_list)) {
+ list_for_each_entry_safe(reg_beacon, btmp,
+ &reg_beacon_list, list) {
+ list_del(&reg_beacon->list);
+ kfree(reg_beacon);
+ }
+ }
+
+ /* First restore to the basic regulatory settings */
+ cfg80211_regdomain = cfg80211_world_regdom;
+
+ mutex_unlock(&reg_mutex);
+ mutex_unlock(&cfg80211_mutex);
+
+ regulatory_hint_core(cfg80211_regdomain->alpha2);
+
+ /*
+ * This restores the ieee80211_regdom module parameter
+ * preference or the last user requested regulatory
+ * settings, user regulatory settings takes precedence.
+ */
+ if (is_an_alpha2(alpha2))
+ regulatory_hint_user(user_alpha2);
+}
+
+
+void regulatory_hint_disconnect(void)
+{
+ REG_DBG_PRINT("cfg80211: All devices are disconnected, going to "
+ "restore regulatory settings\n");
+ restore_regulatory_settings(false);
+}
+
static bool freq_is_chan_12_13_14(u16 freq)
{
if (freq == ieee80211_channel_to_frequency(12) ||
@@ -1870,13 +2280,12 @@ int regulatory_hint_found_beacon(struct wiphy *wiphy,
if (!reg_beacon)
return -ENOMEM;
-#ifdef CONFIG_CFG80211_REG_DEBUG
- printk(KERN_DEBUG "cfg80211: Found new beacon on "
- "frequency: %d MHz (Ch %d) on %s\n",
- beacon_chan->center_freq,
- ieee80211_frequency_to_channel(beacon_chan->center_freq),
- wiphy_name(wiphy));
-#endif
+ REG_DBG_PRINT("cfg80211: Found new beacon on "
+ "frequency: %d MHz (Ch %d) on %s\n",
+ beacon_chan->center_freq,
+ ieee80211_frequency_to_channel(beacon_chan->center_freq),
+ wiphy_name(wiphy));
+
memcpy(&reg_beacon->chan, beacon_chan,
sizeof(struct ieee80211_channel));
@@ -2235,6 +2644,9 @@ int regulatory_init(void)
cfg80211_regdomain = cfg80211_world_regdom;
+ user_alpha2[0] = '9';
+ user_alpha2[1] = '7';
+
/* We always try to get an update for the static regdomain */
err = regulatory_hint_core(cfg80211_regdomain->alpha2);
if (err) {
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index 3362c7c069b..b26224a9f3b 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -41,15 +41,44 @@ int regulatory_hint_found_beacon(struct wiphy *wiphy,
* regulatory_hint_11d - hints a country IE as a regulatory domain
* @wiphy: the wireless device giving the hint (used only for reporting
* conflicts)
+ * @band: the band on which the country IE was received on. This determines
+ * the band we'll process the country IE channel triplets for.
* @country_ie: pointer to the country IE
* @country_ie_len: length of the country IE
*
* We will intersect the rd with the what CRDA tells us should apply
* for the alpha2 this country IE belongs to, this prevents APs from
* sending us incorrect or outdated information against a country.
+ *
+ * The AP is expected to provide Country IE channel triplets for the
+ * band it is on. It is technically possible for APs to send channel
+ * country IE triplets even for channels outside of the band they are
+ * in but for that they would have to use the regulatory extension
+ * in combination with a triplet but this behaviour is currently
+ * not observed. For this reason if a triplet is seen with channel
+ * information for a band the BSS is not present in it will be ignored.
*/
void regulatory_hint_11d(struct wiphy *wiphy,
+ enum ieee80211_band band,
u8 *country_ie,
u8 country_ie_len);
+/**
+ * regulatory_hint_disconnect - informs all devices have been disconneted
+ *
+ * Regulotory rules can be enhanced further upon scanning and upon
+ * connection to an AP. These rules become stale if we disconnect
+ * and go to another country, whether or not we suspend and resume.
+ * If we suspend, go to another country and resume we'll automatically
+ * get disconnected shortly after resuming and things will be reset as well.
+ * This routine is a helper to restore regulatory settings to how they were
+ * prior to our first connect attempt. This includes ignoring country IE and
+ * beacon regulatory hints. The ieee80211_regdom module parameter will always
+ * be respected but if a user had set the regulatory domain that will take
+ * precedence.
+ *
+ * Must be called from process context.
+ */
+void regulatory_hint_disconnect(void);
+
#endif /* __NET_WIRELESS_REG_H */
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 0c2cbbebca9..978cac3414b 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -100,8 +100,10 @@ static void bss_release(struct kref *ref)
if (bss->pub.free_priv)
bss->pub.free_priv(&bss->pub);
- if (bss->ies_allocated)
- kfree(bss->pub.information_elements);
+ if (bss->beacon_ies_allocated)
+ kfree(bss->pub.beacon_ies);
+ if (bss->proberesp_ies_allocated)
+ kfree(bss->pub.proberesp_ies);
BUG_ON(atomic_read(&bss->hold));
@@ -141,9 +143,9 @@ void cfg80211_bss_expire(struct cfg80211_registered_device *dev)
dev->bss_generation++;
}
-static u8 *find_ie(u8 num, u8 *ies, int len)
+const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len)
{
- while (len > 2 && ies[0] != num) {
+ while (len > 2 && ies[0] != eid) {
len -= ies[1] + 2;
ies += ies[1] + 2;
}
@@ -153,11 +155,12 @@ static u8 *find_ie(u8 num, u8 *ies, int len)
return NULL;
return ies;
}
+EXPORT_SYMBOL(cfg80211_find_ie);
static int cmp_ies(u8 num, u8 *ies1, size_t len1, u8 *ies2, size_t len2)
{
- const u8 *ie1 = find_ie(num, ies1, len1);
- const u8 *ie2 = find_ie(num, ies2, len2);
+ const u8 *ie1 = cfg80211_find_ie(num, ies1, len1);
+ const u8 *ie2 = cfg80211_find_ie(num, ies2, len2);
int r;
if (!ie1 && !ie2)
@@ -183,9 +186,9 @@ static bool is_bss(struct cfg80211_bss *a,
if (!ssid)
return true;
- ssidie = find_ie(WLAN_EID_SSID,
- a->information_elements,
- a->len_information_elements);
+ ssidie = cfg80211_find_ie(WLAN_EID_SSID,
+ a->information_elements,
+ a->len_information_elements);
if (!ssidie)
return false;
if (ssidie[1] != ssid_len)
@@ -202,9 +205,9 @@ static bool is_mesh(struct cfg80211_bss *a,
if (!is_zero_ether_addr(a->bssid))
return false;
- ie = find_ie(WLAN_EID_MESH_ID,
- a->information_elements,
- a->len_information_elements);
+ ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
+ a->information_elements,
+ a->len_information_elements);
if (!ie)
return false;
if (ie[1] != meshidlen)
@@ -212,9 +215,9 @@ static bool is_mesh(struct cfg80211_bss *a,
if (memcmp(ie + 2, meshid, meshidlen))
return false;
- ie = find_ie(WLAN_EID_MESH_CONFIG,
- a->information_elements,
- a->len_information_elements);
+ ie = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
+ a->information_elements,
+ a->len_information_elements);
if (!ie)
return false;
if (ie[1] != sizeof(struct ieee80211_meshconf_ie))
@@ -375,8 +378,7 @@ rb_find_bss(struct cfg80211_registered_device *dev,
static struct cfg80211_internal_bss *
cfg80211_bss_update(struct cfg80211_registered_device *dev,
- struct cfg80211_internal_bss *res,
- bool overwrite)
+ struct cfg80211_internal_bss *res)
{
struct cfg80211_internal_bss *found = NULL;
const u8 *meshid, *meshcfg;
@@ -394,11 +396,12 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
if (is_zero_ether_addr(res->pub.bssid)) {
/* must be mesh, verify */
- meshid = find_ie(WLAN_EID_MESH_ID, res->pub.information_elements,
- res->pub.len_information_elements);
- meshcfg = find_ie(WLAN_EID_MESH_CONFIG,
- res->pub.information_elements,
- res->pub.len_information_elements);
+ meshid = cfg80211_find_ie(WLAN_EID_MESH_ID,
+ res->pub.information_elements,
+ res->pub.len_information_elements);
+ meshcfg = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
+ res->pub.information_elements,
+ res->pub.len_information_elements);
if (!meshid || !meshcfg ||
meshcfg[1] != sizeof(struct ieee80211_meshconf_ie)) {
/* bogus mesh */
@@ -418,28 +421,64 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
found->pub.capability = res->pub.capability;
found->ts = res->ts;
- /* overwrite IEs */
- if (overwrite) {
+ /* Update IEs */
+ if (res->pub.proberesp_ies) {
size_t used = dev->wiphy.bss_priv_size + sizeof(*res);
- size_t ielen = res->pub.len_information_elements;
+ size_t ielen = res->pub.len_proberesp_ies;
+
+ if (found->pub.proberesp_ies &&
+ !found->proberesp_ies_allocated &&
+ ksize(found) >= used + ielen) {
+ memcpy(found->pub.proberesp_ies,
+ res->pub.proberesp_ies, ielen);
+ found->pub.len_proberesp_ies = ielen;
+ } else {
+ u8 *ies = found->pub.proberesp_ies;
+
+ if (found->proberesp_ies_allocated)
+ ies = krealloc(ies, ielen, GFP_ATOMIC);
+ else
+ ies = kmalloc(ielen, GFP_ATOMIC);
+
+ if (ies) {
+ memcpy(ies, res->pub.proberesp_ies,
+ ielen);
+ found->proberesp_ies_allocated = true;
+ found->pub.proberesp_ies = ies;
+ found->pub.len_proberesp_ies = ielen;
+ }
+ }
- if (!found->ies_allocated && ksize(found) >= used + ielen) {
- memcpy(found->pub.information_elements,
- res->pub.information_elements, ielen);
- found->pub.len_information_elements = ielen;
+ /* Override possible earlier Beacon frame IEs */
+ found->pub.information_elements =
+ found->pub.proberesp_ies;
+ found->pub.len_information_elements =
+ found->pub.len_proberesp_ies;
+ }
+ if (res->pub.beacon_ies) {
+ size_t used = dev->wiphy.bss_priv_size + sizeof(*res);
+ size_t ielen = res->pub.len_beacon_ies;
+
+ if (found->pub.beacon_ies &&
+ !found->beacon_ies_allocated &&
+ ksize(found) >= used + ielen) {
+ memcpy(found->pub.beacon_ies,
+ res->pub.beacon_ies, ielen);
+ found->pub.len_beacon_ies = ielen;
} else {
- u8 *ies = found->pub.information_elements;
+ u8 *ies = found->pub.beacon_ies;
- if (found->ies_allocated)
+ if (found->beacon_ies_allocated)
ies = krealloc(ies, ielen, GFP_ATOMIC);
else
ies = kmalloc(ielen, GFP_ATOMIC);
if (ies) {
- memcpy(ies, res->pub.information_elements, ielen);
- found->ies_allocated = true;
- found->pub.information_elements = ies;
- found->pub.len_information_elements = ielen;
+ memcpy(ies, res->pub.beacon_ies,
+ ielen);
+ found->beacon_ies_allocated = true;
+ found->pub.beacon_ies = ies;
+ found->pub.len_beacon_ies = ielen;
}
}
}
@@ -489,14 +528,26 @@ cfg80211_inform_bss(struct wiphy *wiphy,
res->pub.tsf = timestamp;
res->pub.beacon_interval = beacon_interval;
res->pub.capability = capability;
- /* point to after the private area */
- res->pub.information_elements = (u8 *)res + sizeof(*res) + privsz;
- memcpy(res->pub.information_elements, ie, ielen);
- res->pub.len_information_elements = ielen;
+ /*
+ * Since we do not know here whether the IEs are from a Beacon or Probe
+ * Response frame, we need to pick one of the options and only use it
+ * with the driver that does not provide the full Beacon/Probe Response
+ * frame. Use Beacon frame pointer to avoid indicating that this should
+ * override the information_elements pointer should we have received an
+ * earlier indication of Probe Response data.
+ *
+ * The initial buffer for the IEs is allocated with the BSS entry and
+ * is located after the private area.
+ */
+ res->pub.beacon_ies = (u8 *)res + sizeof(*res) + privsz;
+ memcpy(res->pub.beacon_ies, ie, ielen);
+ res->pub.len_beacon_ies = ielen;
+ res->pub.information_elements = res->pub.beacon_ies;
+ res->pub.len_information_elements = res->pub.len_beacon_ies;
kref_init(&res->ref);
- res = cfg80211_bss_update(wiphy_to_dev(wiphy), res, 0);
+ res = cfg80211_bss_update(wiphy_to_dev(wiphy), res);
if (!res)
return NULL;
@@ -517,7 +568,6 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
struct cfg80211_internal_bss *res;
size_t ielen = len - offsetof(struct ieee80211_mgmt,
u.probe_resp.variable);
- bool overwrite;
size_t privsz = wiphy->bss_priv_size;
if (WARN_ON(wiphy->signal_type == NL80211_BSS_SIGNAL_UNSPEC &&
@@ -538,16 +588,28 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
res->pub.tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp);
res->pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int);
res->pub.capability = le16_to_cpu(mgmt->u.probe_resp.capab_info);
- /* point to after the private area */
- res->pub.information_elements = (u8 *)res + sizeof(*res) + privsz;
- memcpy(res->pub.information_elements, mgmt->u.probe_resp.variable, ielen);
- res->pub.len_information_elements = ielen;
+ /*
+ * The initial buffer for the IEs is allocated with the BSS entry and
+ * is located after the private area.
+ */
+ if (ieee80211_is_probe_resp(mgmt->frame_control)) {
+ res->pub.proberesp_ies = (u8 *) res + sizeof(*res) + privsz;
+ memcpy(res->pub.proberesp_ies, mgmt->u.probe_resp.variable,
+ ielen);
+ res->pub.len_proberesp_ies = ielen;
+ res->pub.information_elements = res->pub.proberesp_ies;
+ res->pub.len_information_elements = res->pub.len_proberesp_ies;
+ } else {
+ res->pub.beacon_ies = (u8 *) res + sizeof(*res) + privsz;
+ memcpy(res->pub.beacon_ies, mgmt->u.beacon.variable, ielen);
+ res->pub.len_beacon_ies = ielen;
+ res->pub.information_elements = res->pub.beacon_ies;
+ res->pub.len_information_elements = res->pub.len_beacon_ies;
+ }
kref_init(&res->ref);
- overwrite = ieee80211_is_probe_resp(mgmt->frame_control);
-
- res = cfg80211_bss_update(wiphy_to_dev(wiphy), res, overwrite);
+ res = cfg80211_bss_update(wiphy_to_dev(wiphy), res);
if (!res)
return NULL;
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index 2333d78187e..17fde0da1b0 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -34,6 +34,44 @@ struct cfg80211_conn {
bool auto_auth, prev_bssid_valid;
};
+bool cfg80211_is_all_idle(void)
+{
+ struct cfg80211_registered_device *rdev;
+ struct wireless_dev *wdev;
+ bool is_all_idle = true;
+
+ mutex_lock(&cfg80211_mutex);
+
+ /*
+ * All devices must be idle as otherwise if you are actively
+ * scanning some new beacon hints could be learned and would
+ * count as new regulatory hints.
+ */
+ list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
+ cfg80211_lock_rdev(rdev);
+ list_for_each_entry(wdev, &rdev->netdev_list, list) {
+ wdev_lock(wdev);
+ if (wdev->sme_state != CFG80211_SME_IDLE)
+ is_all_idle = false;
+ wdev_unlock(wdev);
+ }
+ cfg80211_unlock_rdev(rdev);
+ }
+
+ mutex_unlock(&cfg80211_mutex);
+
+ return is_all_idle;
+}
+
+static void disconnect_work(struct work_struct *work)
+{
+ if (!cfg80211_is_all_idle())
+ return;
+
+ regulatory_hint_disconnect();
+}
+
+static DECLARE_WORK(cfg80211_disconnect_work, disconnect_work);
static int cfg80211_conn_scan(struct wireless_dev *wdev)
{
@@ -454,6 +492,7 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
* - and country_ie[1] which is the IE length
*/
regulatory_hint_11d(wdev->wiphy,
+ bss->channel->band,
country_ie + 2,
country_ie[1]);
}
@@ -655,7 +694,10 @@ void __cfg80211_disconnected(struct net_device *dev, const u8 *ie,
memset(&wrqu, 0, sizeof(wrqu));
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+ wdev->wext.connect.ssid_len = 0;
#endif
+
+ schedule_work(&cfg80211_disconnect_work);
}
void cfg80211_disconnected(struct net_device *dev, u16 reason,
diff --git a/net/wireless/sysfs.c b/net/wireless/sysfs.c
index efe3c5c92b2..9f2cef3e0ca 100644
--- a/net/wireless/sysfs.c
+++ b/net/wireless/sysfs.c
@@ -33,10 +33,30 @@ static ssize_t name ## _show(struct device *dev, \
SHOW_FMT(index, "%d", wiphy_idx);
SHOW_FMT(macaddress, "%pM", wiphy.perm_addr);
+SHOW_FMT(address_mask, "%pM", wiphy.addr_mask);
+
+static ssize_t addresses_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct wiphy *wiphy = &dev_to_rdev(dev)->wiphy;
+ char *start = buf;
+ int i;
+
+ if (!wiphy->addresses)
+ return sprintf(buf, "%pM\n", wiphy->perm_addr);
+
+ for (i = 0; i < wiphy->n_addresses; i++)
+ buf += sprintf(buf, "%pM\n", &wiphy->addresses[i].addr);
+
+ return buf - start;
+}
static struct device_attribute ieee80211_dev_attrs[] = {
__ATTR_RO(index),
__ATTR_RO(macaddress),
+ __ATTR_RO(address_mask),
+ __ATTR_RO(addresses),
{}
};
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 23557c1d0a9..be2ab8c59e3 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -227,8 +227,11 @@ unsigned int ieee80211_hdrlen(__le16 fc)
if (ieee80211_is_data(fc)) {
if (ieee80211_has_a4(fc))
hdrlen = 30;
- if (ieee80211_is_data_qos(fc))
+ if (ieee80211_is_data_qos(fc)) {
hdrlen += IEEE80211_QOS_CTL_LEN;
+ if (ieee80211_has_order(fc))
+ hdrlen += IEEE80211_HT_CTL_LEN;
+ }
goto out;
}
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index 4198243a3df..b17eeae448d 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -1204,21 +1204,47 @@ int cfg80211_wext_siwrate(struct net_device *dev,
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
struct cfg80211_bitrate_mask mask;
+ u32 fixed, maxrate;
+ struct ieee80211_supported_band *sband;
+ int band, ridx;
+ bool match = false;
if (!rdev->ops->set_bitrate_mask)
return -EOPNOTSUPP;
- mask.fixed = 0;
- mask.maxrate = 0;
+ memset(&mask, 0, sizeof(mask));
+ fixed = 0;
+ maxrate = (u32)-1;
if (rate->value < 0) {
/* nothing */
} else if (rate->fixed) {
- mask.fixed = rate->value / 1000; /* kbps */
+ fixed = rate->value / 100000;
} else {
- mask.maxrate = rate->value / 1000; /* kbps */
+ maxrate = rate->value / 100000;
+ }
+
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ sband = wdev->wiphy->bands[band];
+ if (sband == NULL)
+ continue;
+ for (ridx = 0; ridx < sband->n_bitrates; ridx++) {
+ struct ieee80211_rate *srate = &sband->bitrates[ridx];
+ if (fixed == srate->bitrate) {
+ mask.control[band].legacy = 1 << ridx;
+ match = true;
+ break;
+ }
+ if (srate->bitrate <= maxrate) {
+ mask.control[band].legacy |= 1 << ridx;
+ match = true;
+ }
+ }
}
+ if (!match)
+ return -EINVAL;
+
return rdev->ops->set_bitrate_mask(wdev->wiphy, dev, NULL, &mask);
}
EXPORT_SYMBOL_GPL(cfg80211_wext_siwrate);
diff --git a/net/wireless/wext-proc.c b/net/wireless/wext-proc.c
index 273a7f77c83..8bafa31fa9f 100644
--- a/net/wireless/wext-proc.c
+++ b/net/wireless/wext-proc.c
@@ -140,7 +140,7 @@ static const struct file_operations wireless_seq_fops = {
.release = seq_release_net,
};
-int wext_proc_init(struct net *net)
+int __net_init wext_proc_init(struct net *net)
{
/* Create /proc/net/wireless entry */
if (!proc_net_fops_create(net, "wireless", S_IRUGO, &wireless_seq_fops))
@@ -149,7 +149,7 @@ int wext_proc_init(struct net *net)
return 0;
}
-void wext_proc_exit(struct net *net)
+void __net_exit wext_proc_exit(struct net *net)
{
proc_net_remove(net, "wireless");
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-04 13:32:34 +0000