diff options
Diffstat (limited to 'net')
-rw-r--r-- | net/mac80211/cfg.c | 39 | ||||
-rw-r--r-- | net/mac80211/ieee80211_i.h | 13 | ||||
-rw-r--r-- | net/mac80211/iface.c | 14 | ||||
-rw-r--r-- | net/mac80211/main.c | 3 | ||||
-rw-r--r-- | net/mac80211/mesh.c | 26 | ||||
-rw-r--r-- | net/mac80211/mesh.h | 25 | ||||
-rw-r--r-- | net/wireless/Makefile | 2 | ||||
-rw-r--r-- | net/wireless/core.c | 15 | ||||
-rw-r--r-- | net/wireless/core.h | 13 | ||||
-rw-r--r-- | net/wireless/mesh.c | 140 | ||||
-rw-r--r-- | net/wireless/nl80211.c | 137 | ||||
-rw-r--r-- | net/wireless/util.c | 1 |
12 files changed, 322 insertions, 106 deletions
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index d34c7c3dd76..68329d713c0 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -60,11 +60,6 @@ static int ieee80211_change_iface(struct wiphy *wiphy, if (ret) return ret; - if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len) - ieee80211_sdata_set_mesh_id(sdata, - params->mesh_id_len, - params->mesh_id); - if (type == NL80211_IFTYPE_AP_VLAN && params && params->use_4addr == 0) rcu_assign_pointer(sdata->u.vlan.sta, NULL); @@ -1003,9 +998,9 @@ static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask) return (mask >> (parm-1)) & 0x1; } -static int ieee80211_set_mesh_params(struct wiphy *wiphy, - struct net_device *dev, - const struct mesh_config *nconf, u32 mask) +static int ieee80211_update_mesh_params(struct wiphy *wiphy, + struct net_device *dev, u32 mask, + const struct mesh_config *nconf) { struct mesh_config *conf; struct ieee80211_sub_if_data *sdata; @@ -1056,6 +1051,30 @@ static int ieee80211_set_mesh_params(struct wiphy *wiphy, return 0; } +static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev, + const struct mesh_config *conf, + const struct mesh_setup *setup) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + + memcpy(&sdata->u.mesh.mshcfg, conf, sizeof(struct mesh_config)); + ifmsh->mesh_id_len = setup->mesh_id_len; + memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len); + + ieee80211_start_mesh(sdata); + + return 0; +} + +static int ieee80211_leave_mesh(struct wiphy *wiphy, struct net_device *dev) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + ieee80211_stop_mesh(sdata); + + return 0; +} #endif static int ieee80211_change_bss(struct wiphy *wiphy, @@ -1760,8 +1779,10 @@ struct cfg80211_ops mac80211_config_ops = { .change_mpath = ieee80211_change_mpath, .get_mpath = ieee80211_get_mpath, .dump_mpath = ieee80211_dump_mpath, - .set_mesh_params = ieee80211_set_mesh_params, + .update_mesh_params = ieee80211_update_mesh_params, .get_mesh_params = ieee80211_get_mesh_params, + .join_mesh = ieee80211_join_mesh, + .leave_mesh = ieee80211_leave_mesh, #endif .change_bss = ieee80211_change_bss, .set_txq_params = ieee80211_set_txq_params, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index e7c88072563..72499fe5fc3 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -609,19 +609,6 @@ struct ieee80211_sub_if_data *vif_to_sdata(struct ieee80211_vif *p) return container_of(p, struct ieee80211_sub_if_data, vif); } -static inline void -ieee80211_sdata_set_mesh_id(struct ieee80211_sub_if_data *sdata, - u8 mesh_id_len, u8 *mesh_id) -{ -#ifdef CONFIG_MAC80211_MESH - struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; - ifmsh->mesh_id_len = mesh_id_len; - memcpy(ifmsh->mesh_id, mesh_id, mesh_id_len); -#else - WARN_ON(1); -#endif -} - enum sdata_queue_type { IEEE80211_SDATA_QUEUE_TYPE_FRAME = 0, IEEE80211_SDATA_QUEUE_AGG_START = 1, diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 96e27f1e79f..f0f11bb794a 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -268,9 +268,7 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up) goto err_stop; } - if (ieee80211_vif_is_mesh(&sdata->vif)) { - ieee80211_start_mesh(sdata); - } else if (sdata->vif.type == NL80211_IFTYPE_AP) { + if (sdata->vif.type == NL80211_IFTYPE_AP) { local->fif_pspoll++; local->fif_probe_req++; @@ -495,10 +493,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, ieee80211_adjust_monitor_flags(sdata, -1); ieee80211_configure_filter(local); break; - case NL80211_IFTYPE_MESH_POINT: - if (ieee80211_vif_is_mesh(&sdata->vif)) - ieee80211_stop_mesh(sdata); - /* fall through */ default: flush_work(&sdata->work); /* @@ -1188,12 +1182,6 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, if (ret) goto fail; - if (ieee80211_vif_is_mesh(&sdata->vif) && - params && params->mesh_id_len) - ieee80211_sdata_set_mesh_id(sdata, - params->mesh_id_len, - params->mesh_id); - mutex_lock(&local->iflist_mtx); list_add_tail_rcu(&sdata->list, &local->interfaces); mutex_unlock(&local->iflist_mtx); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 107a0cbe52a..2de69766c6a 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -246,7 +246,8 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, !!sdata->u.ibss.presp; break; case NL80211_IFTYPE_MESH_POINT: - sdata->vif.bss_conf.enable_beacon = true; + sdata->vif.bss_conf.enable_beacon = + !!sdata->u.mesh.mesh_id_len; break; default: /* not reached */ diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 0d3234875ac..63e1188d506 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -530,6 +530,11 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + + ifmsh->mesh_id_len = 0; + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); + sta_info_flush(local, NULL); del_timer_sync(&sdata->u.mesh.housekeeping_timer); del_timer_sync(&sdata->u.mesh.mesh_path_root_timer); @@ -674,27 +679,6 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) ieee80211_mesh_housekeeping_timer, (unsigned long) sdata); - ifmsh->mshcfg.dot11MeshRetryTimeout = MESH_RET_T; - ifmsh->mshcfg.dot11MeshConfirmTimeout = MESH_CONF_T; - ifmsh->mshcfg.dot11MeshHoldingTimeout = MESH_HOLD_T; - ifmsh->mshcfg.dot11MeshMaxRetries = MESH_MAX_RETR; - ifmsh->mshcfg.dot11MeshTTL = MESH_TTL; - ifmsh->mshcfg.element_ttl = MESH_DEFAULT_ELEMENT_TTL; - ifmsh->mshcfg.auto_open_plinks = true; - ifmsh->mshcfg.dot11MeshMaxPeerLinks = - MESH_MAX_ESTAB_PLINKS; - ifmsh->mshcfg.dot11MeshHWMPactivePathTimeout = - MESH_PATH_TIMEOUT; - ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval = - MESH_PREQ_MIN_INT; - ifmsh->mshcfg.dot11MeshHWMPnetDiameterTraversalTime = - MESH_DIAM_TRAVERSAL_TIME; - ifmsh->mshcfg.dot11MeshHWMPmaxPREQretries = - MESH_MAX_PREQ_RETRIES; - ifmsh->mshcfg.path_refresh_time = - MESH_PATH_REFRESH_TIME; - ifmsh->mshcfg.min_discovery_timeout = - MESH_MIN_DISCOVERY_TIMEOUT; ifmsh->accepting_plinks = true; ifmsh->preq_id = 0; ifmsh->sn = 0; diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 182942eeac4..039d7fa0af7 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -175,33 +175,10 @@ struct mesh_rmc { */ #define MESH_CFG_CMP_LEN (IEEE80211_MESH_CONFIG_LEN - 2) -/* Default values, timeouts in ms */ -#define MESH_TTL 31 -#define MESH_MAX_RETR 3 -#define MESH_RET_T 100 -#define MESH_CONF_T 100 -#define MESH_HOLD_T 100 - -#define MESH_PATH_TIMEOUT 5000 -/* Minimum interval between two consecutive PREQs originated by the same - * interface - */ -#define MESH_PREQ_MIN_INT 10 -#define MESH_DIAM_TRAVERSAL_TIME 50 -/* A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds before - * timing out. This way it will remain ACTIVE and no data frames will be - * unnecesarily held in the pending queue. - */ -#define MESH_PATH_REFRESH_TIME 1000 -#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME) #define MESH_DEFAULT_BEACON_INTERVAL 1000 /* in 1024 us units */ -#define MESH_MAX_PREQ_RETRIES 4 #define MESH_PATH_EXPIRE (600 * HZ) -/* Default maximum number of established plinks per interface */ -#define MESH_MAX_ESTAB_PLINKS 32 - /* Default maximum number of plinks per interface */ #define MESH_MAX_PLINKS 256 @@ -216,8 +193,6 @@ struct mesh_rmc { #define PERR_RCODE_NO_ROUTE 12 #define PERR_RCODE_DEST_UNREACH 13 -#define MESH_DEFAULT_ELEMENT_TTL 31 - /* Public interfaces */ /* Various */ int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, diff --git a/net/wireless/Makefile b/net/wireless/Makefile index e77e508126f..55a28ab21db 100644 --- a/net/wireless/Makefile +++ b/net/wireless/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_WEXT_SPY) += wext-spy.o obj-$(CONFIG_WEXT_PRIV) += wext-priv.o cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o -cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o +cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o cfg80211-$(CONFIG_CFG80211_WEXT) += wext-compat.o wext-sme.o cfg80211-$(CONFIG_CFG80211_INTERNAL_REGDB) += regdb.o diff --git a/net/wireless/core.c b/net/wireless/core.c index 630bcf0a2f0..79772fcc37b 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -332,6 +332,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) WARN_ON(ops->add_virtual_intf && !ops->del_virtual_intf); WARN_ON(ops->add_station && !ops->del_station); WARN_ON(ops->add_mpath && !ops->del_mpath); + WARN_ON(ops->join_mesh && !ops->leave_mesh); alloc_size = sizeof(*rdev) + sizeof_priv; @@ -752,6 +753,9 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb, cfg80211_mlme_down(rdev, dev); wdev_unlock(wdev); break; + case NL80211_IFTYPE_MESH_POINT: + cfg80211_leave_mesh(rdev, dev); + break; default: break; } @@ -775,20 +779,27 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb, } cfg80211_lock_rdev(rdev); mutex_lock(&rdev->devlist_mtx); -#ifdef CONFIG_CFG80211_WEXT wdev_lock(wdev); switch (wdev->iftype) { +#ifdef CONFIG_CFG80211_WEXT case NL80211_IFTYPE_ADHOC: cfg80211_ibss_wext_join(rdev, wdev); break; case NL80211_IFTYPE_STATION: cfg80211_mgd_wext_connect(rdev, wdev); break; +#endif + case NL80211_IFTYPE_MESH_POINT: + /* backward compat code ... */ + if (wdev->mesh_id_up_len) + __cfg80211_join_mesh(rdev, dev, wdev->ssid, + wdev->mesh_id_up_len, + &default_mesh_config); + break; default: break; } wdev_unlock(wdev); -#endif rdev->opencount++; mutex_unlock(&rdev->devlist_mtx); cfg80211_unlock_rdev(rdev); diff --git a/net/wireless/core.h b/net/wireless/core.h index ee80ad8dc65..743203bb61a 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -285,6 +285,19 @@ void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid); int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev); +/* mesh */ +extern const struct mesh_config default_mesh_config; +int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev, + const u8 *mesh_id, u8 mesh_id_len, + const struct mesh_config *conf); +int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev, + const u8 *mesh_id, u8 mesh_id_len, + const struct mesh_config *conf); +int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev); + /* MLME */ int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev, struct net_device *dev, diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c new file mode 100644 index 00000000000..e0b9747fe50 --- /dev/null +++ b/net/wireless/mesh.c @@ -0,0 +1,140 @@ +#include <linux/ieee80211.h> +#include <net/cfg80211.h> +#include "core.h" + +/* Default values, timeouts in ms */ +#define MESH_TTL 31 +#define MESH_DEFAULT_ELEMENT_TTL 31 +#define MESH_MAX_RETR 3 +#define MESH_RET_T 100 +#define MESH_CONF_T 100 +#define MESH_HOLD_T 100 + +#define MESH_PATH_TIMEOUT 5000 + +/* + * Minimum interval between two consecutive PREQs originated by the same + * interface + */ +#define MESH_PREQ_MIN_INT 10 +#define MESH_DIAM_TRAVERSAL_TIME 50 + +/* + * A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds + * before timing out. This way it will remain ACTIVE and no data frames + * will be unnecessarily held in the pending queue. + */ +#define MESH_PATH_REFRESH_TIME 1000 +#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME) + +/* Default maximum number of established plinks per interface */ +#define MESH_MAX_ESTAB_PLINKS 32 + +#define MESH_MAX_PREQ_RETRIES 4 + + +const struct mesh_config default_mesh_config = { + .dot11MeshRetryTimeout = MESH_RET_T, + .dot11MeshConfirmTimeout = MESH_CONF_T, + .dot11MeshHoldingTimeout = MESH_HOLD_T, + .dot11MeshMaxRetries = MESH_MAX_RETR, + .dot11MeshTTL = MESH_TTL, + .element_ttl = MESH_DEFAULT_ELEMENT_TTL, + .auto_open_plinks = true, + .dot11MeshMaxPeerLinks = MESH_MAX_ESTAB_PLINKS, + .dot11MeshHWMPactivePathTimeout = MESH_PATH_TIMEOUT, + .dot11MeshHWMPpreqMinInterval = MESH_PREQ_MIN_INT, + .dot11MeshHWMPnetDiameterTraversalTime = MESH_DIAM_TRAVERSAL_TIME, + .dot11MeshHWMPmaxPREQretries = MESH_MAX_PREQ_RETRIES, + .path_refresh_time = MESH_PATH_REFRESH_TIME, + .min_discovery_timeout = MESH_MIN_DISCOVERY_TIMEOUT, +}; + + +int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev, + const u8 *mesh_id, u8 mesh_id_len, + const struct mesh_config *conf) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct mesh_setup setup = { + .mesh_id = mesh_id, + .mesh_id_len = mesh_id_len, + }; + int err; + + BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN); + + ASSERT_WDEV_LOCK(wdev); + + if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) + return -EOPNOTSUPP; + + if (wdev->mesh_id_len) + return -EALREADY; + + if (!mesh_id_len) + return -EINVAL; + + if (!rdev->ops->join_mesh) + return -EOPNOTSUPP; + + err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, &setup); + if (!err) { + memcpy(wdev->ssid, mesh_id, mesh_id_len); + wdev->mesh_id_len = mesh_id_len; + } + + return err; +} + +int cfg80211_join_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev, + const u8 *mesh_id, u8 mesh_id_len, + const struct mesh_config *conf) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + int err; + + wdev_lock(wdev); + err = __cfg80211_join_mesh(rdev, dev, mesh_id, mesh_id_len, conf); + wdev_unlock(wdev); + + return err; +} + +static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + int err; + + ASSERT_WDEV_LOCK(wdev); + + if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) + return -EOPNOTSUPP; + + if (!rdev->ops->leave_mesh) + return -EOPNOTSUPP; + + if (!wdev->mesh_id_len) + return -ENOTCONN; + + err = rdev->ops->leave_mesh(&rdev->wiphy, dev); + if (!err) + wdev->mesh_id_len = 0; + return err; +} + +int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev, + struct net_device *dev) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + int err; + + wdev_lock(wdev); + err = __cfg80211_leave_mesh(rdev, dev); + wdev_unlock(wdev); + + return err; +} diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index c8d4d53fc45..56508d40c74 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -661,13 +661,14 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, CMD(add_beacon, NEW_BEACON); CMD(add_station, NEW_STATION); CMD(add_mpath, NEW_MPATH); - CMD(set_mesh_params, SET_MESH_PARAMS); + CMD(update_mesh_params, SET_MESH_PARAMS); CMD(change_bss, SET_BSS); CMD(auth, AUTHENTICATE); CMD(assoc, ASSOCIATE); CMD(deauth, DEAUTHENTICATE); CMD(disassoc, DISASSOCIATE); CMD(join_ibss, JOIN_IBSS); + CMD(join_mesh, JOIN_MESH); CMD(set_pmksa, SET_PMKSA); CMD(del_pmksa, DEL_PMKSA); CMD(flush_pmksa, FLUSH_PMKSA); @@ -1324,11 +1325,21 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info) } if (info->attrs[NL80211_ATTR_MESH_ID]) { + struct wireless_dev *wdev = dev->ieee80211_ptr; + if (ntype != NL80211_IFTYPE_MESH_POINT) return -EINVAL; - params.mesh_id = nla_data(info->attrs[NL80211_ATTR_MESH_ID]); - params.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]); - change = true; + if (netif_running(dev)) + return -EBUSY; + + wdev_lock(wdev); + BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != + IEEE80211_MAX_MESH_ID_LEN); + wdev->mesh_id_up_len = + nla_len(info->attrs[NL80211_ATTR_MESH_ID]); + memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]), + wdev->mesh_id_up_len); + wdev_unlock(wdev); } if (info->attrs[NL80211_ATTR_4ADDR]) { @@ -1388,12 +1399,6 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info) !(rdev->wiphy.interface_modes & (1 << type))) return -EOPNOTSUPP; - if (type == NL80211_IFTYPE_MESH_POINT && - info->attrs[NL80211_ATTR_MESH_ID]) { - params.mesh_id = nla_data(info->attrs[NL80211_ATTR_MESH_ID]); - params.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]); - } - if (info->attrs[NL80211_ATTR_4ADDR]) { params.use_4addr = !!nla_get_u8(info->attrs[NL80211_ATTR_4ADDR]); err = nl80211_valid_4addr(rdev, NULL, params.use_4addr, type); @@ -1410,6 +1415,20 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info) if (IS_ERR(dev)) return PTR_ERR(dev); + if (type == NL80211_IFTYPE_MESH_POINT && + info->attrs[NL80211_ATTR_MESH_ID]) { + struct wireless_dev *wdev = dev->ieee80211_ptr; + + wdev_lock(wdev); + BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != + IEEE80211_MAX_MESH_ID_LEN); + wdev->mesh_id_up_len = + nla_len(info->attrs[NL80211_ATTR_MESH_ID]); + memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]), + wdev->mesh_id_up_len); + wdev_unlock(wdev); + } + return 0; } @@ -2543,21 +2562,32 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info) } static int nl80211_get_mesh_params(struct sk_buff *skb, - struct genl_info *info) + struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; - struct mesh_config cur_params; - int err; struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct mesh_config cur_params; + int err = 0; void *hdr; struct nlattr *pinfoattr; struct sk_buff *msg; + if (wdev->iftype != NL80211_IFTYPE_MESH_POINT) + return -EOPNOTSUPP; + if (!rdev->ops->get_mesh_params) return -EOPNOTSUPP; - /* Get the mesh params */ - err = rdev->ops->get_mesh_params(&rdev->wiphy, dev, &cur_params); + wdev_lock(wdev); + /* If not connected, get default parameters */ + if (!wdev->mesh_id_len) + memcpy(&cur_params, &default_mesh_config, sizeof(cur_params)); + else + err = rdev->ops->get_mesh_params(&rdev->wiphy, dev, + &cur_params); + wdev_unlock(wdev); + if (err) return err; @@ -2705,23 +2735,37 @@ do {\ #undef FILL_IN_MESH_PARAM_IF_SET } -static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info) +static int nl80211_update_mesh_params(struct sk_buff *skb, + struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; struct mesh_config cfg; u32 mask; int err; - if (!rdev->ops->set_mesh_params) + if (wdev->iftype != NL80211_IFTYPE_MESH_POINT) + return -EOPNOTSUPP; + + if (!rdev->ops->update_mesh_params) return -EOPNOTSUPP; err = nl80211_parse_mesh_params(info, &cfg, &mask); if (err) return err; - /* Apply changes */ - return rdev->ops->set_mesh_params(&rdev->wiphy, dev, &cfg, mask); + wdev_lock(wdev); + if (!wdev->mesh_id_len) + err = -ENOLINK; + + if (!err) + err = rdev->ops->update_mesh_params(&rdev->wiphy, dev, + mask, &cfg); + + wdev_unlock(wdev); + + return err; } static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info) @@ -4505,6 +4549,41 @@ out: return err; } +static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + struct mesh_config cfg; + int err; + + /* start with default */ + memcpy(&cfg, &default_mesh_config, sizeof(cfg)); + + if (info->attrs[NL80211_ATTR_MESH_PARAMS]) { + /* and parse parameters if given */ + err = nl80211_parse_mesh_params(info, &cfg, NULL); + if (err) + return err; + } + + if (!info->attrs[NL80211_ATTR_MESH_ID] || + !nla_len(info->attrs[NL80211_ATTR_MESH_ID])) + return -EINVAL; + + return cfg80211_join_mesh(rdev, dev, + nla_data(info->attrs[NL80211_ATTR_MESH_ID]), + nla_len(info->attrs[NL80211_ATTR_MESH_ID]), + &cfg); +} + +static int nl80211_leave_mesh(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + + return cfg80211_leave_mesh(rdev, dev); +} + #define NL80211_FLAG_NEED_WIPHY 0x01 #define NL80211_FLAG_NEED_NETDEV 0x02 #define NL80211_FLAG_NEED_RTNL 0x04 @@ -4769,10 +4848,10 @@ static struct genl_ops nl80211_ops[] = { }, { .cmd = NL80211_CMD_SET_MESH_PARAMS, - .doit = nl80211_set_mesh_params, + .doit = nl80211_update_mesh_params, .policy = nl80211_policy, .flags = GENL_ADMIN_PERM, - .internal_flags = NL80211_FLAG_NEED_NETDEV | + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | NL80211_FLAG_NEED_RTNL, }, { @@ -4987,6 +5066,22 @@ static struct genl_ops nl80211_ops[] = { .internal_flags = NL80211_FLAG_NEED_NETDEV | NL80211_FLAG_NEED_RTNL, }, + { + .cmd = NL80211_CMD_JOIN_MESH, + .doit = nl80211_join_mesh, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, + { + .cmd = NL80211_CMD_LEAVE_MESH, + .doit = nl80211_leave_mesh, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, }; static struct genl_multicast_group nl80211_mlme_mcgrp = { diff --git a/net/wireless/util.c b/net/wireless/util.c index fee020b15a4..4de624ca4c6 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -792,6 +792,7 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev, if (ntype != otype) { dev->ieee80211_ptr->use_4addr = false; + dev->ieee80211_ptr->mesh_id_up_len = 0; switch (otype) { case NL80211_IFTYPE_ADHOC: |