diff options
Diffstat (limited to 'sound/aoa/codecs/snd-aoa-codec-onyx.c')
| -rw-r--r-- | sound/aoa/codecs/snd-aoa-codec-onyx.c | 1113 |
1 files changed, 1113 insertions, 0 deletions
diff --git a/sound/aoa/codecs/snd-aoa-codec-onyx.c b/sound/aoa/codecs/snd-aoa-codec-onyx.c new file mode 100644 index 00000000000..0b7650788f1 --- /dev/null +++ b/sound/aoa/codecs/snd-aoa-codec-onyx.c @@ -0,0 +1,1113 @@ +/* + * Apple Onboard Audio driver for Onyx codec + * + * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> + * + * GPL v2, can be found in COPYING. + * + * + * This is a driver for the pcm3052 codec chip (codenamed Onyx) + * that is present in newer Apple hardware (with digital output). + * + * The Onyx codec has the following connections (listed by the bit + * to be used in aoa_codec.connected): + * 0: analog output + * 1: digital output + * 2: line input + * 3: microphone input + * Note that even though I know of no machine that has for example + * the digital output connected but not the analog, I have handled + * all the different cases in the code so that this driver may serve + * as a good example of what to do. + * + * NOTE: This driver assumes that there's at most one chip to be + * used with one alsa card, in form of creating all kinds + * of mixer elements without regard for their existence. + * But snd-aoa assumes that there's at most one card, so + * this means you can only have one onyx on a system. This + * should probably be fixed by changing the assumption of + * having just a single card on a system, and making the + * 'card' pointer accessible to anyone who needs it instead + * of hiding it in the aoa_snd_* functions... + * + */ +#include <linux/delay.h> +#include <linux/module.h> +MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("pcm3052 (onyx) codec driver for snd-aoa"); + +#include "snd-aoa-codec-onyx.h" +#include "../aoa.h" +#include "../soundbus/soundbus.h" + + +#define PFX "snd-aoa-codec-onyx: " + +struct onyx { + /* cache registers 65 to 80, they are write-only! */ + u8 cache[16]; + struct i2c_client i2c; + struct aoa_codec codec; + u32 initialised:1, + spdif_locked:1, + analog_locked:1, + original_mute:2; + int open_count; + struct codec_info *codec_info; + + /* mutex serializes concurrent access to the device + * and this structure. + */ + struct mutex mutex; +}; +#define codec_to_onyx(c) container_of(c, struct onyx, codec) + +/* both return 0 if all ok, else on error */ +static int onyx_read_register(struct onyx *onyx, u8 reg, u8 *value) +{ + s32 v; + + if (reg != ONYX_REG_CONTROL) { + *value = onyx->cache[reg-FIRSTREGISTER]; + return 0; + } + v = i2c_smbus_read_byte_data(&onyx->i2c, reg); + if (v < 0) + return -1; + *value = (u8)v; + onyx->cache[ONYX_REG_CONTROL-FIRSTREGISTER] = *value; + return 0; +} + +static int onyx_write_register(struct onyx *onyx, u8 reg, u8 value) +{ + int result; + + result = i2c_smbus_write_byte_data(&onyx->i2c, reg, value); + if (!result) + onyx->cache[reg-FIRSTREGISTER] = value; + return result; +} + +/* alsa stuff */ + +static int onyx_dev_register(struct snd_device *dev) +{ + return 0; +} + +static struct snd_device_ops ops = { + .dev_register = onyx_dev_register, +}; + +/* this is necessary because most alsa mixer programs + * can't properly handle the negative range */ +#define VOLUME_RANGE_SHIFT 128 + +static int onyx_snd_vol_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = -128 + VOLUME_RANGE_SHIFT; + uinfo->value.integer.max = -1 + VOLUME_RANGE_SHIFT; + return 0; +} + +static int onyx_snd_vol_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct onyx *onyx = snd_kcontrol_chip(kcontrol); + s8 l, r; + + mutex_lock(&onyx->mutex); + onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_LEFT, &l); + onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT, &r); + mutex_unlock(&onyx->mutex); + + ucontrol->value.integer.value[0] = l + VOLUME_RANGE_SHIFT; + ucontrol->value.integer.value[1] = r + VOLUME_RANGE_SHIFT; + + return 0; +} + +static int onyx_snd_vol_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct onyx *onyx = snd_kcontrol_chip(kcontrol); + s8 l, r; + + mutex_lock(&onyx->mutex); + onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_LEFT, &l); + onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT, &r); + + if (l + VOLUME_RANGE_SHIFT == ucontrol->value.integer.value[0] && + r + VOLUME_RANGE_SHIFT == ucontrol->value.integer.value[1]) { + mutex_unlock(&onyx->mutex); + return 0; + } + + onyx_write_register(onyx, ONYX_REG_DAC_ATTEN_LEFT, + ucontrol->value.integer.value[0] + - VOLUME_RANGE_SHIFT); + onyx_write_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT, + ucontrol->value.integer.value[1] + - VOLUME_RANGE_SHIFT); + mutex_unlock(&onyx->mutex); + + return 1; +} + +static struct snd_kcontrol_new volume_control = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Volume", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = onyx_snd_vol_info, + .get = onyx_snd_vol_get, + .put = onyx_snd_vol_put, +}; + +/* like above, this is necessary because a lot + * of alsa mixer programs don't handle ranges + * that don't start at 0 properly. + * even alsamixer is one of them... */ +#define INPUTGAIN_RANGE_SHIFT (-3) + +static int onyx_snd_inputgain_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 3 + INPUTGAIN_RANGE_SHIFT; + uinfo->value.integer.max = 28 + INPUTGAIN_RANGE_SHIFT; + return 0; +} + +static int onyx_snd_inputgain_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct onyx *onyx = snd_kcontrol_chip(kcontrol); + u8 ig; + + mutex_lock(&onyx->mutex); + onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &ig); + mutex_unlock(&onyx->mutex); + + ucontrol->value.integer.value[0] = + (ig & ONYX_ADC_PGA_GAIN_MASK) + INPUTGAIN_RANGE_SHIFT; + + return 0; +} + +static int onyx_snd_inputgain_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct onyx *onyx = snd_kcontrol_chip(kcontrol); + u8 v, n; + + mutex_lock(&onyx->mutex); + onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v); + n = v; + n &= ~ONYX_ADC_PGA_GAIN_MASK; + n |= (ucontrol->value.integer.value[0] - INPUTGAIN_RANGE_SHIFT) + & ONYX_ADC_PGA_GAIN_MASK; + onyx_write_register(onyx, ONYX_REG_ADC_CONTROL, n); + mutex_unlock(&onyx->mutex); + + return n != v; +} + +static struct snd_kcontrol_new inputgain_control = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Capture Volume", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = onyx_snd_inputgain_info, + .get = onyx_snd_inputgain_get, + .put = onyx_snd_inputgain_put, +}; + +static int onyx_snd_capture_source_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + static char *texts[] = { "Line-In", "Microphone" }; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = 2; + if (uinfo->value.enumerated.item > 1) + uinfo->value.enumerated.item = 1; + strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]); + return 0; +} + +static int onyx_snd_capture_source_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct onyx *onyx = snd_kcontrol_chip(kcontrol); + s8 v; + + mutex_lock(&onyx->mutex); + onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v); + mutex_unlock(&onyx->mutex); + + ucontrol->value.enumerated.item[0] = !!(v&ONYX_ADC_INPUT_MIC); + + return 0; +} + +static void onyx_set_capture_source(struct onyx *onyx, int mic) +{ + s8 v; + + mutex_lock(&onyx->mutex); + onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v); + v &= ~ONYX_ADC_INPUT_MIC; + if (mic) + v |= ONYX_ADC_INPUT_MIC; + onyx_write_register(onyx, ONYX_REG_ADC_CONTROL, v); + mutex_unlock(&onyx->mutex); +} + +static int onyx_snd_capture_source_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + onyx_set_capture_source(snd_kcontrol_chip(kcontrol), + ucontrol->value.enumerated.item[0]); + return 1; +} + +static struct snd_kcontrol_new capture_source_control = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + /* If we name this 'Input Source', it properly shows up in + * alsamixer as a selection, * but it's shown under the + * 'Playback' category. + * If I name it 'Capture Source', it shows up in strange + * ways (two bools of which one can be selected at a + * time) but at least it's shown in the 'Capture' + * category. + * I was told that this was due to backward compatibility, + * but I don't understand then why the mangling is *not* + * done when I name it "Input Source"..... + */ + .name = "Capture Source", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = onyx_snd_capture_source_info, + .get = onyx_snd_capture_source_get, + .put = onyx_snd_capture_source_put, +}; + +static int onyx_snd_mute_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} + +static int onyx_snd_mute_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct onyx *onyx = snd_kcontrol_chip(kcontrol); + u8 c; + + mutex_lock(&onyx->mutex); + onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &c); + mutex_unlock(&onyx->mutex); + + ucontrol->value.integer.value[0] = !(c & ONYX_MUTE_LEFT); + ucontrol->value.integer.value[1] = !(c & ONYX_MUTE_RIGHT); + + return 0; +} + +static int onyx_snd_mute_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct onyx *onyx = snd_kcontrol_chip(kcontrol); + u8 v = 0, c = 0; + int err = -EBUSY; + + mutex_lock(&onyx->mutex); + if (onyx->analog_locked) + goto out_unlock; + + onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v); + c = v; + c &= ~(ONYX_MUTE_RIGHT | ONYX_MUTE_LEFT); + if (!ucontrol->value.integer.value[0]) + c |= ONYX_MUTE_LEFT; + if (!ucontrol->value.integer.value[1]) + c |= ONYX_MUTE_RIGHT; + err = onyx_write_register(onyx, ONYX_REG_DAC_CONTROL, c); + + out_unlock: + mutex_unlock(&onyx->mutex); + + return !err ? (v != c) : err; +} + +static struct snd_kcontrol_new mute_control = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Switch", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = onyx_snd_mute_info, + .get = onyx_snd_mute_get, + .put = onyx_snd_mute_put, +}; + + +static int onyx_snd_single_bit_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} + +#define FLAG_POLARITY_INVERT 1 +#define FLAG_SPDIFLOCK 2 + +static int onyx_snd_single_bit_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct onyx *onyx = snd_kcontrol_chip(kcontrol); + u8 c; + long int pv = kcontrol->private_value; + u8 polarity = (pv >> 16) & FLAG_POLARITY_INVERT; + u8 address = (pv >> 8) & 0xff; + u8 mask = pv & 0xff; + + mutex_lock(&onyx->mutex); + onyx_read_register(onyx, address, &c); + mutex_unlock(&onyx->mutex); + + ucontrol->value.integer.value[0] = !!(c & mask) ^ polarity; + + return 0; +} + +static int onyx_snd_single_bit_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct onyx *onyx = snd_kcontrol_chip(kcontrol); + u8 v = 0, c = 0; + int err; + long int pv = kcontrol->private_value; + u8 polarity = (pv >> 16) & FLAG_POLARITY_INVERT; + u8 spdiflock = (pv >> 16) & FLAG_SPDIFLOCK; + u8 address = (pv >> 8) & 0xff; + u8 mask = pv & 0xff; + + mutex_lock(&onyx->mutex); + if (spdiflock && onyx->spdif_locked) { + /* even if alsamixer doesn't care.. */ + err = -EBUSY; + goto out_unlock; + } + onyx_read_register(onyx, address, &v); + c = v; + c &= ~(mask); + if (!!ucontrol->value.integer.value[0] ^ polarity) + c |= mask; + err = onyx_write_register(onyx, address, c); + + out_unlock: + mutex_unlock(&onyx->mutex); + + return !err ? (v != c) : err; +} + +#define SINGLE_BIT(n, type, description, address, mask, flags) \ +static struct snd_kcontrol_new n##_control = { \ + .iface = SNDRV_CTL_ELEM_IFACE_##type, \ + .name = description, \ + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .info = onyx_snd_single_bit_info, \ + .get = onyx_snd_single_bit_get, \ + .put = onyx_snd_single_bit_put, \ + .private_value = (flags << 16) | (address << 8) | mask \ +} + +SINGLE_BIT(spdif, + MIXER, + SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH), + ONYX_REG_DIG_INFO4, + ONYX_SPDIF_ENABLE, + FLAG_SPDIFLOCK); +SINGLE_BIT(ovr1, + MIXER, + "Oversampling Rate", + ONYX_REG_DAC_CONTROL, + ONYX_OVR1, + 0); +SINGLE_BIT(flt0, + MIXER, + "Fast Digital Filter Rolloff", + ONYX_REG_DAC_FILTER, + ONYX_ROLLOFF_FAST, + FLAG_POLARITY_INVERT); +SINGLE_BIT(hpf, + MIXER, + "Highpass Filter", + ONYX_REG_ADC_HPF_BYPASS, + ONYX_HPF_DISABLE, + FLAG_POLARITY_INVERT); +SINGLE_BIT(dm12, + MIXER, + "Digital De-Emphasis", + ONYX_REG_DAC_DEEMPH, + ONYX_DIGDEEMPH_CTRL, + 0); + +static int onyx_spdif_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; + uinfo->count = 1; + return 0; +} + +static int onyx_spdif_mask_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + /* datasheet page 30, all others are 0 */ + ucontrol->value.iec958.status[0] = 0x3e; + ucontrol->value.iec958.status[1] = 0xff; + + ucontrol->value.iec958.status[3] = 0x3f; + ucontrol->value.iec958.status[4] = 0x0f; + + return 0; +} + +static struct snd_kcontrol_new onyx_spdif_mask = { + .access = SNDRV_CTL_ELEM_ACCESS_READ, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK), + .info = onyx_spdif_info, + .get = onyx_spdif_mask_get, +}; + +static int onyx_spdif_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct onyx *onyx = snd_kcontrol_chip(kcontrol); + u8 v; + + mutex_lock(&onyx->mutex); + onyx_read_register(onyx, ONYX_REG_DIG_INFO1, &v); + ucontrol->value.iec958.status[0] = v & 0x3e; + + onyx_read_register(onyx, ONYX_REG_DIG_INFO2, &v); + ucontrol->value.iec958.status[1] = v; + + onyx_read_register(onyx, ONYX_REG_DIG_INFO3, &v); + ucontrol->value.iec958.status[3] = v & 0x3f; + + onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v); + ucontrol->value.iec958.status[4] = v & 0x0f; + mutex_unlock(&onyx->mutex); + + return 0; +} + +static int onyx_spdif_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct onyx *onyx = snd_kcontrol_chip(kcontrol); + u8 v; + + mutex_lock(&onyx->mutex); + onyx_read_register(onyx, ONYX_REG_DIG_INFO1, &v); + v = (v & ~0x3e) | (ucontrol->value.iec958.status[0] & 0x3e); + onyx_write_register(onyx, ONYX_REG_DIG_INFO1, v); + + v = ucontrol->value.iec958.status[1]; + onyx_write_register(onyx, ONYX_REG_DIG_INFO2, v); + + onyx_read_register(onyx, ONYX_REG_DIG_INFO3, &v); + v = (v & ~0x3f) | (ucontrol->value.iec958.status[3] & 0x3f); + onyx_write_register(onyx, ONYX_REG_DIG_INFO3, v); + + onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v); + v = (v & ~0x0f) | (ucontrol->value.iec958.status[4] & 0x0f); + onyx_write_register(onyx, ONYX_REG_DIG_INFO4, v); + mutex_unlock(&onyx->mutex); + + return 1; +} + +static struct snd_kcontrol_new onyx_spdif_ctrl = { + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT), + .info = onyx_spdif_info, + .get = onyx_spdif_get, + .put = onyx_spdif_put, +}; + +/* our registers */ + +static u8 register_map[] = { + ONYX_REG_DAC_ATTEN_LEFT, + ONYX_REG_DAC_ATTEN_RIGHT, + ONYX_REG_CONTROL, + ONYX_REG_DAC_CONTROL, + ONYX_REG_DAC_DEEMPH, + ONYX_REG_DAC_FILTER, + ONYX_REG_DAC_OUTPHASE, + ONYX_REG_ADC_CONTROL, + ONYX_REG_ADC_HPF_BYPASS, + ONYX_REG_DIG_INFO1, + ONYX_REG_DIG_INFO2, + ONYX_REG_DIG_INFO3, + ONYX_REG_DIG_INFO4 +}; + +static u8 initial_values[ARRAY_SIZE(register_map)] = { + 0x80, 0x80, /* muted */ + ONYX_MRST | ONYX_SRST, /* but handled specially! */ + ONYX_MUTE_LEFT | ONYX_MUTE_RIGHT, + 0, /* no deemphasis */ + ONYX_DAC_FILTER_ALWAYS, + ONYX_OUTPHASE_INVERTED, + (-1 /*dB*/ + 8) & 0xF, /* line in selected, -1 dB gain*/ + ONYX_ADC_HPF_ALWAYS, + (1<<2), /* pcm audio */ + 2, /* category: pcm coder */ + 0, /* sampling frequency 44.1 kHz, clock accuracy level II */ + 1 /* 24 bit depth */ +}; + +/* reset registers of chip, either to initial or to previous values */ +static int onyx_register_init(struct onyx *onyx) +{ + int i; + u8 val; + u8 regs[sizeof(initial_values)]; + + if (!onyx->initialised) { + memcpy(regs, initial_values, sizeof(initial_values)); + if (onyx_read_register(onyx, ONYX_REG_CONTROL, &val)) + return -1; + val &= ~ONYX_SILICONVERSION; + val |= initial_values[3]; + regs[3] = val; + } else { + for (i=0; i<sizeof(register_map); i++) + regs[i] = onyx->cache[register_map[i]-FIRSTREGISTER]; + } + + for (i=0; i<sizeof(register_map); i++) { + if (onyx_write_register(onyx, register_map[i], regs[i])) + return -1; + } + onyx->initialised = 1; + return 0; +} + +static struct transfer_info onyx_transfers[] = { + /* this is first so we can skip it if no input is present... + * No hardware exists with that, but it's here as an example + * of what to do :) */ + { + /* analog input */ + .formats = SNDRV_PCM_FMTBIT_S8 | + SNDRV_PCM_FMTBIT_S16_BE | + SNDRV_PCM_FMTBIT_S24_BE, + .rates = SNDRV_PCM_RATE_8000_96000, + .transfer_in = 1, + .must_be_clock_source = 0, + .tag = 0, + }, + { + /* if analog and digital are currently off, anything should go, + * so this entry describes everything we can do... */ + .formats = SNDRV_PCM_FMTBIT_S8 | + SNDRV_PCM_FMTBIT_S16_BE | + SNDRV_PCM_FMTBIT_S24_BE +#ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE + | SNDRV_PCM_FMTBIT_COMPRESSED_16BE +#endif + , + .rates = SNDRV_PCM_RATE_8000_96000, + .tag = 0, + }, + { + /* analog output */ + .formats = SNDRV_PCM_FMTBIT_S8 | + SNDRV_PCM_FMTBIT_S16_BE | + SNDRV_PCM_FMTBIT_S24_BE, + .rates = SNDRV_PCM_RATE_8000_96000, + .transfer_in = 0, + .must_be_clock_source = 0, + .tag = 1, + }, + { + /* digital pcm output, also possible for analog out */ + .formats = SNDRV_PCM_FMTBIT_S8 | + SNDRV_PCM_FMTBIT_S16_BE | + SNDRV_PCM_FMTBIT_S24_BE, + .rates = SNDRV_PCM_RATE_32000 | + SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000, + .transfer_in = 0, + .must_be_clock_source = 0, + .tag = 2, + }, +#ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE +Once alsa gets supports for this kind of thing we can add it... + { + /* digital compressed output */ + .formats = SNDRV_PCM_FMTBIT_COMPRESSED_16BE, + .rates = SNDRV_PCM_RATE_32000 | + SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000, + .tag = 2, + }, +#endif + {} +}; + +static int onyx_usable(struct codec_info_item *cii, + struct transfer_info *ti, + struct transfer_info *out) +{ + u8 v; + struct onyx *onyx = cii->codec_data; + int spdif_enabled, analog_enabled; + + mutex_lock(&onyx->mutex); + onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v); + spdif_enabled = !!(v & ONYX_SPDIF_ENABLE); + onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v); + analog_enabled = + (v & (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT)) + != (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT); + mutex_unlock(&onyx->mutex); + + switch (ti->tag) { + case 0: return 1; + case 1: return analog_enabled; + case 2: return spdif_enabled; + } + return 1; +} + +static int onyx_prepare(struct codec_info_item *cii, + struct bus_info *bi, + struct snd_pcm_substream *substream) +{ + u8 v; + struct onyx *onyx = cii->codec_data; + int err = -EBUSY; + + mutex_lock(&onyx->mutex); + +#ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE + if (substream->runtime->format == SNDRV_PCM_FMTBIT_COMPRESSED_16BE) { + /* mute and lock analog output */ + onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v); + if (onyx_write_register(onyx + ONYX_REG_DAC_CONTROL, + v | ONYX_MUTE_RIGHT | ONYX_MUTE_LEFT)) + goto out_unlock; + onyx->analog_locked = 1; + err = 0; + goto out_unlock; + } +#endif + switch (substream->runtime->rate) { + case 32000: + case 44100: + case 48000: + /* these rates are ok for all outputs */ + /* FIXME: program spdif channel control bits here so that + * userspace doesn't have to if it only plays pcm! */ + err = 0; + goto out_unlock; + default: + /* got some rate that the digital output can't do, + * so disable and lock it */ + onyx_read_register(cii->codec_data, ONYX_REG_DIG_INFO4, &v); + if (onyx_write_register(onyx, + ONYX_REG_DIG_INFO4, + v & ~ONYX_SPDIF_ENABLE)) + goto out_unlock; + onyx->spdif_locked = 1; + err = 0; + goto out_unlock; + } + + out_unlock: + mutex_unlock(&onyx->mutex); + + return err; +} + +static int onyx_open(struct codec_info_item *cii, + struct snd_pcm_substream *substream) +{ + struct onyx *onyx = cii->codec_data; + + mutex_lock(&onyx->mutex); + onyx->open_count++; + mutex_unlock(&onyx->mutex); + + return 0; +} + +static int onyx_close(struct codec_info_item *cii, + struct snd_pcm_substream *substream) +{ + struct onyx *onyx = cii->codec_data; + + mutex_lock(&onyx->mutex); + onyx->open_count--; + if (!onyx->open_count) + onyx->spdif_locked = onyx->analog_locked = 0; + mutex_unlock(&onyx->mutex); + + return 0; +} + +static int onyx_switch_clock(struct codec_info_item *cii, + enum clock_switch what) +{ + struct onyx *onyx = cii->codec_data; + + mutex_lock(&onyx->mutex); + /* this *MUST* be more elaborate later... */ + switch (what) { + case CLOCK_SWITCH_PREPARE_SLAVE: + onyx->codec.gpio->methods->all_amps_off(onyx->codec.gpio); + break; + case CLOCK_SWITCH_SLAVE: + onyx->codec.gpio->methods->all_amps_restore(onyx->codec.gpio); + break; + default: /* silence warning */ + break; + } + mutex_unlock(&onyx->mutex); + + return 0; +} + +#ifdef CONFIG_PM + +static int onyx_suspend(struct codec_info_item *cii, pm_message_t state) +{ + struct onyx *onyx = cii->codec_data; + u8 v; + int err = -ENXIO; + + mutex_lock(&onyx->mutex); + if (onyx_read_register(onyx, ONYX_REG_CONTROL, &v)) + goto out_unlock; + onyx_write_register(onyx, ONYX_REG_CONTROL, v | ONYX_ADPSV | ONYX_DAPSV); + /* Apple does a sleep here but the datasheet says to do it on resume */ + err = 0; + out_unlock: + mutex_unlock(&onyx->mutex); + + return err; +} + +static int onyx_resume(struct codec_info_item *cii) +{ + struct onyx *onyx = cii->codec_data; + u8 v; + int err = -ENXIO; + + mutex_lock(&onyx->mutex); + /* take codec out of suspend */ + if (onyx_read_register(onyx, ONYX_REG_CONTROL, &v)) + goto out_unlock; + onyx_write_register(onyx, ONYX_REG_CONTROL, v & ~(ONYX_ADPSV | ONYX_DAPSV)); + /* FIXME: should divide by sample rate, but 8k is the lowest we go */ + msleep(2205000/8000); + /* reset all values */ + onyx_register_init(onyx); + err = 0; + out_unlock: + mutex_unlock(&onyx->mutex); + + return err; +} + +#endif /* CONFIG_PM */ + +static struct codec_info onyx_codec_info = { + .transfers = onyx_transfers, + .sysclock_factor = 256, + .bus_factor = 64, + .owner = THIS_MODULE, + .usable = onyx_usable, + .prepare = onyx_prepare, + .open = onyx_open, + .close = onyx_close, + .switch_clock = onyx_switch_clock, +#ifdef CONFIG_PM + .suspend = onyx_suspend, + .resume = onyx_resume, +#endif +}; + +static int onyx_init_codec(struct aoa_codec *codec) +{ + struct onyx *onyx = codec_to_onyx(codec); + struct snd_kcontrol *ctl; + struct codec_info *ci = &onyx_codec_info; + u8 v; + int err; + + if (!onyx->codec.gpio || !onyx->codec.gpio->methods) { + printk(KERN_ERR PFX "gpios not assigned!!\n"); + return -EINVAL; + } + + onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0); + msleep(1); + onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 1); + msleep(1); + onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0); + msleep(1); + + if (onyx_register_init(onyx)) { + printk(KERN_ERR PFX "failed to initialise onyx registers\n"); + return -ENODEV; + } + + if (aoa_snd_device_new(SNDRV_DEV_LOWLEVEL, onyx, &ops)) { + printk(KERN_ERR PFX "failed to create onyx snd device!\n"); + return -ENODEV; + } + + /* nothing connected? what a joke! */ + if ((onyx->codec.connected & 0xF) == 0) + return -ENOTCONN; + + /* if no inputs are present... */ + if ((onyx->codec.connected & 0xC) == 0) { + if (!onyx->codec_info) + onyx->codec_info = kmalloc(sizeof(struct codec_info), GFP_KERNEL); + if (!onyx->codec_info) + return -ENOMEM; + ci = onyx->codec_info; + *ci = onyx_codec_info; + ci->transfers++; + } + + /* if no outputs are present... */ + if ((onyx->codec.connected & 3) == 0) { + if (!onyx->codec_info) + onyx->codec_info = kmalloc(sizeof(struct codec_info), GFP_KERNEL); + if (!onyx->codec_info) + return -ENOMEM; + ci = onyx->codec_info; + /* this is fine as there have to be inputs + * if we end up in this part of the code */ + *ci = onyx_codec_info; + ci->transfers[1].formats = 0; + } + + if (onyx->codec.soundbus_dev->attach_codec(onyx->codec.soundbus_dev, + aoa_get_card(), + ci, onyx)) { + printk(KERN_ERR PFX "error creating onyx pcm\n"); + return -ENODEV; + } +#define ADDCTL(n) \ + do { \ + ctl = snd_ctl_new1(&n, onyx); \ + if (ctl) { \ + ctl->id.device = \ + onyx->codec.soundbus_dev->pcm->device; \ + err = aoa_snd_ctl_add(ctl); \ + if (err) \ + goto error; \ + } \ + } while (0) + + if (onyx->codec.soundbus_dev->pcm) { + /* give the user appropriate controls + * depending on what inputs are connected */ + if ((onyx->codec.connected & 0xC) == 0xC) + ADDCTL(capture_source_control); + else if (onyx->codec.connected & 4) + onyx_set_capture_source(onyx, 0); + else + onyx_set_capture_source(onyx, 1); + if (onyx->codec.connected & 0xC) + ADDCTL(inputgain_control); + + /* depending on what output is connected, + * give the user appropriate controls */ + if (onyx->codec.connected & 1) { + ADDCTL(volume_control); + ADDCTL(mute_control); + ADDCTL(ovr1_control); + ADDCTL(flt0_control); + ADDCTL(hpf_control); + ADDCTL(dm12_control); + /* spdif control defaults to off */ + } + if (onyx->codec.connected & 2) { + ADDCTL(onyx_spdif_mask); + ADDCTL(onyx_spdif_ctrl); + } + if ((onyx->codec.connected & 3) == 3) + ADDCTL(spdif_control); + /* if only S/PDIF is connected, enable it unconditionally */ + if ((onyx->codec.connected & 3) == 2) { + onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v); + v |= ONYX_SPDIF_ENABLE; + onyx_write_register(onyx, ONYX_REG_DIG_INFO4, v); + } + } +#undef ADDCTL + printk(KERN_INFO PFX "attached to onyx codec via i2c\n"); + + return 0; + error: + onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx); + snd_device_free(aoa_get_card(), onyx); + return err; +} + +static void onyx_exit_codec(struct aoa_codec *codec) +{ + struct onyx *onyx = codec_to_onyx(codec); + + if (!onyx->codec.soundbus_dev) { + printk(KERN_ERR PFX "onyx_exit_codec called without soundbus_dev!\n"); + return; + } + onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx); +} + +static struct i2c_driver onyx_driver; + +static int onyx_create(struct i2c_adapter *adapter, + struct device_node *node, + int addr) +{ + struct onyx *onyx; + u8 dummy; + + onyx = kzalloc(sizeof(struct onyx), GFP_KERNEL); + + if (!onyx) + return -ENOMEM; + + mutex_init(&onyx->mutex); + onyx->i2c.driver = &onyx_driver; + onyx->i2c.adapter = adapter; + onyx->i2c.addr = addr & 0x7f; + strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE-1); + + if (i2c_attach_client(&onyx->i2c)) { + printk(KERN_ERR PFX "failed to attach to i2c\n"); + goto fail; + } + + /* we try to read from register ONYX_REG_CONTROL + * to check if the codec is present */ + if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) { + i2c_detach_client(&onyx->i2c); + printk(KERN_ERR PFX "failed to read control register\n"); + goto fail; + } + + strlcpy(onyx->codec.name, "onyx", MAX_CODEC_NAME_LEN-1); + onyx->codec.owner = THIS_MODULE; + onyx->codec.init = onyx_init_codec; + onyx->codec.exit = onyx_exit_codec; + onyx->codec.node = of_node_get(node); + + if (aoa_codec_register(&onyx->codec)) { + i2c_detach_client(&onyx->i2c); + goto fail; + } + printk(KERN_DEBUG PFX "created and attached onyx instance\n"); + return 0; + fail: + kfree(onyx); + return -EINVAL; +} + +static int onyx_i2c_attach(struct i2c_adapter *adapter) +{ + struct device_node *busnode, *dev = NULL; + struct pmac_i2c_bus *bus; + + bus = pmac_i2c_adapter_to_bus(adapter); + if (bus == NULL) + return -ENODEV; + busnode = pmac_i2c_get_bus_node(bus); + + while ((dev = of_get_next_child(busnode, dev)) != NULL) { + if (device_is_compatible(dev, "pcm3052")) { + u32 *addr; + printk(KERN_DEBUG PFX "found pcm3052\n"); + addr = (u32 *) get_property(dev, "reg", NULL); + if (!addr) + return -ENODEV; + return onyx_create(adapter, dev, (*addr)>>1); + } + } + + /* if that didn't work, try desperate mode for older + * machines that have stuff missing from the device tree */ + + if (!device_is_compatible(busnode, "k2-i2c")) + return -ENODEV; + + printk(KERN_DEBUG PFX "found k2-i2c, checking if onyx chip is on it\n"); + /* probe both possible addresses for the onyx chip */ + if (onyx_create(adapter, NULL, 0x46) == 0) + return 0; + return onyx_create(adapter, NULL, 0x47); +} + +static int onyx_i2c_detach(struct i2c_client *client) +{ + struct onyx *onyx = container_of(client, struct onyx, i2c); + int err; + + if ((err = i2c_detach_client(client))) + return err; + aoa_codec_unregister(&onyx->codec); + of_node_put(onyx->codec.node); + if (onyx->codec_info) + kfree(onyx->codec_info); + kfree(onyx); + return 0; +} + +static struct i2c_driver onyx_driver = { + .driver = { + .name = "aoa_codec_onyx", + .owner = THIS_MODULE, + }, + .attach_adapter = onyx_i2c_attach, + .detach_client = onyx_i2c_detach, +}; + +static int __init onyx_init(void) +{ + return i2c_add_driver(&onyx_driver); +} + +static void __exit onyx_exit(void) +{ + i2c_del_driver(&onyx_driver); +} + +module_init(onyx_init); +module_exit(onyx_exit); |