diff options
Diffstat (limited to 'sound/drivers')
| -rw-r--r-- | sound/drivers/mpu401/mpu401.c | 3 | ||||
| -rw-r--r-- | sound/drivers/mpu401/mpu401_uart.c | 20 |
2 files changed, 11 insertions, 12 deletions
diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c index 149d05a8202..1c02852acee 100644 --- a/sound/drivers/mpu401/mpu401.c +++ b/sound/drivers/mpu401/mpu401.c @@ -86,8 +86,7 @@ static int snd_mpu401_create(int dev, struct snd_card **rcard) } err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port[dev], 0, - irq[dev], irq[dev] >= 0 ? IRQF_DISABLED : 0, - NULL); + irq[dev], NULL); if (err < 0) { printk(KERN_ERR "MPU401 not detected at 0x%lx\n", port[dev]); goto _err; diff --git a/sound/drivers/mpu401/mpu401_uart.c b/sound/drivers/mpu401/mpu401_uart.c index 2af09996a3d..9d01c181fec 100644 --- a/sound/drivers/mpu401/mpu401_uart.c +++ b/sound/drivers/mpu401/mpu401_uart.c @@ -3,7 +3,7 @@ * Routines for control of MPU-401 in UART mode * * MPU-401 supports UART mode which is not capable generate transmit - * interrupts thus output is done via polling. Also, if irq < 0, then + * interrupts thus output is done via polling. Without interrupt, * input is done also via polling. Do not expect good performance. * * @@ -374,7 +374,7 @@ snd_mpu401_uart_input_trigger(struct snd_rawmidi_substream *substream, int up) /* first time - flush FIFO */ while (max-- > 0) mpu->read(mpu, MPU401D(mpu)); - if (mpu->irq < 0) + if (mpu->info_flags & MPU401_INFO_USE_TIMER) snd_mpu401_uart_add_timer(mpu, 1); } @@ -383,7 +383,7 @@ snd_mpu401_uart_input_trigger(struct snd_rawmidi_substream *substream, int up) snd_mpu401_uart_input_read(mpu); spin_unlock_irqrestore(&mpu->input_lock, flags); } else { - if (mpu->irq < 0) + if (mpu->info_flags & MPU401_INFO_USE_TIMER) snd_mpu401_uart_remove_timer(mpu, 1); clear_bit(MPU401_MODE_BIT_INPUT_TRIGGER, &mpu->mode); } @@ -496,7 +496,7 @@ static struct snd_rawmidi_ops snd_mpu401_uart_input = static void snd_mpu401_uart_free(struct snd_rawmidi *rmidi) { struct snd_mpu401 *mpu = rmidi->private_data; - if (mpu->irq_flags && mpu->irq >= 0) + if (mpu->irq >= 0) free_irq(mpu->irq, (void *) mpu); release_and_free_resource(mpu->res); kfree(mpu); @@ -509,8 +509,7 @@ static void snd_mpu401_uart_free(struct snd_rawmidi *rmidi) * @hardware: the hardware type, MPU401_HW_XXXX * @port: the base address of MPU401 port * @info_flags: bitflags MPU401_INFO_XXX - * @irq: the irq number, -1 if no interrupt for mpu - * @irq_flags: the irq request flags (SA_XXX), 0 if irq was already reserved. + * @irq: the ISA irq number, -1 if not to be allocated * @rrawmidi: the pointer to store the new rawmidi instance * * Creates a new MPU-401 instance. @@ -525,7 +524,7 @@ int snd_mpu401_uart_new(struct snd_card *card, int device, unsigned short hardware, unsigned long port, unsigned int info_flags, - int irq, int irq_flags, + int irq, struct snd_rawmidi ** rrawmidi) { struct snd_mpu401 *mpu; @@ -577,8 +576,8 @@ int snd_mpu401_uart_new(struct snd_card *card, int device, mpu->cport = port + 2; else mpu->cport = port + 1; - if (irq >= 0 && irq_flags) { - if (request_irq(irq, snd_mpu401_uart_interrupt, irq_flags, + if (irq >= 0) { + if (request_irq(irq, snd_mpu401_uart_interrupt, IRQF_DISABLED, "MPU401 UART", (void *) mpu)) { snd_printk(KERN_ERR "mpu401_uart: " "unable to grab IRQ %d\n", irq); @@ -586,9 +585,10 @@ int snd_mpu401_uart_new(struct snd_card *card, int device, return -EBUSY; } } + if (irq < 0 && !(info_flags & MPU401_INFO_IRQ_HOOK)) + info_flags |= MPU401_INFO_USE_TIMER; mpu->info_flags = info_flags; mpu->irq = irq; - mpu->irq_flags = irq_flags; if (card->shortname[0]) snprintf(rmidi->name, sizeof(rmidi->name), "%s MIDI", card->shortname); |