summaryrefslogtreecommitdiffstats
path: root/sound/oss/trix.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/oss/trix.c')
-rw-r--r--sound/oss/trix.c525
1 files changed, 525 insertions, 0 deletions
diff --git a/sound/oss/trix.c b/sound/oss/trix.c
new file mode 100644
index 00000000000..d1f1f154dcc
--- /dev/null
+++ b/sound/oss/trix.c
@@ -0,0 +1,525 @@
+/*
+ * sound/trix.c
+ *
+ * Low level driver for the MediaTrix AudioTrix Pro
+ * (MT-0002-PC Control Chip)
+ *
+ *
+ * Copyright (C) by Hannu Savolainen 1993-1997
+ *
+ * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
+ * Version 2 (June 1991). See the "COPYING" file distributed with this software
+ * for more info.
+ *
+ * Changes
+ * Alan Cox Modularisation, cleanup.
+ * Christoph Hellwig Adapted to module_init/module_exit
+ * Arnaldo C. de Melo Got rid of attach_uart401
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include "sound_config.h"
+#include "sb.h"
+#include "sound_firmware.h"
+
+#include "ad1848.h"
+#include "mpu401.h"
+
+#include "trix_boot.h"
+
+static int mpu;
+
+static int joystick;
+
+static unsigned char trix_read(int addr)
+{
+ outb(((unsigned char) addr), 0x390); /* MT-0002-PC ASIC address */
+ return inb(0x391); /* MT-0002-PC ASIC data */
+}
+
+static void trix_write(int addr, int data)
+{
+ outb(((unsigned char) addr), 0x390); /* MT-0002-PC ASIC address */
+ outb(((unsigned char) data), 0x391); /* MT-0002-PC ASIC data */
+}
+
+static void download_boot(int base)
+{
+ int i = 0, n = trix_boot_len;
+
+ if (trix_boot_len == 0)
+ return;
+
+ trix_write(0xf8, 0x00); /* ??????? */
+ outb((0x01), base + 6); /* Clear the internal data pointer */
+ outb((0x00), base + 6); /* Restart */
+
+ /*
+ * Write the boot code to the RAM upload/download register.
+ * Each write increments the internal data pointer.
+ */
+ outb((0x01), base + 6); /* Clear the internal data pointer */
+ outb((0x1A), 0x390); /* Select RAM download/upload port */
+
+ for (i = 0; i < n; i++)
+ outb((trix_boot[i]), 0x391);
+ for (i = n; i < 10016; i++) /* Clear up to first 16 bytes of data RAM */
+ outb((0x00), 0x391);
+ outb((0x00), base + 6); /* Reset */
+ outb((0x50), 0x390); /* ?????? */
+
+}
+
+static int trix_set_wss_port(struct address_info *hw_config)
+{
+ unsigned char addr_bits;
+
+ if (trix_read(0x15) != 0x71) /* No ASIC signature */
+ {
+ MDB(printk(KERN_ERR "No AudioTrix ASIC signature found\n"));
+ return 0;
+ }
+
+ /*
+ * Reset some registers.
+ */
+
+ trix_write(0x13, 0);
+ trix_write(0x14, 0);
+
+ /*
+ * Configure the ASIC to place the codec to the proper I/O location
+ */
+
+ switch (hw_config->io_base)
+ {
+ case 0x530:
+ addr_bits = 0;
+ break;
+ case 0x604:
+ addr_bits = 1;
+ break;
+ case 0xE80:
+ addr_bits = 2;
+ break;
+ case 0xF40:
+ addr_bits = 3;
+ break;
+ default:
+ return 0;
+ }
+
+ trix_write(0x19, (trix_read(0x19) & 0x03) | addr_bits);
+ return 1;
+}
+
+/*
+ * Probe and attach routines for the Windows Sound System mode of
+ * AudioTrix Pro
+ */
+
+static int __init init_trix_wss(struct address_info *hw_config)
+{
+ static unsigned char dma_bits[4] = {
+ 1, 2, 0, 3
+ };
+ struct resource *ports;
+ int config_port = hw_config->io_base + 0;
+ int dma1 = hw_config->dma, dma2 = hw_config->dma2;
+ int old_num_mixers = num_mixers;
+ u8 config, bits;
+ int ret;
+
+ switch(hw_config->irq) {
+ case 7:
+ bits = 8;
+ break;
+ case 9:
+ bits = 0x10;
+ break;
+ case 10:
+ bits = 0x18;
+ break;
+ case 11:
+ bits = 0x20;
+ break;
+ default:
+ printk(KERN_ERR "AudioTrix: Bad WSS IRQ %d\n", hw_config->irq);
+ return 0;
+ }
+
+ switch (dma1) {
+ case 0:
+ case 1:
+ case 3:
+ break;
+ default:
+ printk(KERN_ERR "AudioTrix: Bad WSS DMA %d\n", dma1);
+ return 0;
+ }
+
+ switch (dma2) {
+ case -1:
+ case 0:
+ case 1:
+ case 3:
+ break;
+ default:
+ printk(KERN_ERR "AudioTrix: Bad capture DMA %d\n", dma2);
+ return 0;
+ }
+
+ /*
+ * Check if the IO port returns valid signature. The original MS Sound
+ * system returns 0x04 while some cards (AudioTrix Pro for example)
+ * return 0x00.
+ */
+ ports = request_region(hw_config->io_base + 4, 4, "ad1848");
+ if (!ports) {
+ printk(KERN_ERR "AudioTrix: MSS I/O port conflict (%x)\n", hw_config->io_base);
+ return 0;
+ }
+
+ if (!request_region(hw_config->io_base, 4, "MSS config")) {
+ printk(KERN_ERR "AudioTrix: MSS I/O port conflict (%x)\n", hw_config->io_base);
+ release_region(hw_config->io_base + 4, 4);
+ return 0;
+ }
+
+ if (!trix_set_wss_port(hw_config))
+ goto fail;
+
+ config = inb(hw_config->io_base + 3);
+
+ if ((config & 0x3f) != 0x00)
+ {
+ MDB(printk(KERN_ERR "No MSS signature detected on port 0x%x\n", hw_config->io_base));
+ goto fail;
+ }
+
+ /*
+ * Check that DMA0 is not in use with a 8 bit board.
+ */
+
+ if (dma1 == 0 && config & 0x80)
+ {
+ printk(KERN_ERR "AudioTrix: Can't use DMA0 with a 8 bit card slot\n");
+ goto fail;
+ }
+ if (hw_config->irq > 9 && config & 0x80)
+ {
+ printk(KERN_ERR "AudioTrix: Can't use IRQ%d with a 8 bit card slot\n", hw_config->irq);
+ goto fail;
+ }
+
+ ret = ad1848_detect(ports, NULL, hw_config->osp);
+ if (!ret)
+ goto fail;
+
+ if (joystick==1)
+ trix_write(0x15, 0x80);
+
+ /*
+ * Set the IRQ and DMA addresses.
+ */
+
+ outb((bits | 0x40), config_port);
+
+ if (dma2 == -1 || dma2 == dma1)
+ {
+ bits |= dma_bits[dma1];
+ dma2 = dma1;
+ }
+ else
+ {
+ unsigned char tmp;
+
+ tmp = trix_read(0x13) & ~30;
+ trix_write(0x13, tmp | 0x80 | (dma1 << 4));
+
+ tmp = trix_read(0x14) & ~30;
+ trix_write(0x14, tmp | 0x80 | (dma2 << 4));
+ }
+
+ outb((bits), config_port); /* Write IRQ+DMA setup */
+
+ hw_config->slots[0] = ad1848_init("AudioTrix Pro", ports,
+ hw_config->irq,
+ dma1,
+ dma2,
+ 0,
+ hw_config->osp,
+ THIS_MODULE);
+
+ if (num_mixers > old_num_mixers) /* Mixer got installed */
+ {
+ AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE); /* Line in */
+ AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_CD);
+ AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_SYNTH); /* OPL4 */
+ AD1848_REROUTE(SOUND_MIXER_SPEAKER, SOUND_MIXER_ALTPCM); /* SB */
+ }
+ return 1;
+
+fail:
+ release_region(hw_config->io_base, 4);
+ release_region(hw_config->io_base + 4, 4);
+ return 0;
+}
+
+static int __init probe_trix_sb(struct address_info *hw_config)
+{
+
+ int tmp;
+ unsigned char conf;
+ extern int sb_be_quiet;
+ int old_quiet;
+ static signed char irq_translate[] = {
+ -1, -1, -1, 0, 1, 2, -1, 3
+ };
+
+ if (trix_boot_len == 0)
+ return 0; /* No boot code -> no fun */
+
+ if ((hw_config->io_base & 0xffffff8f) != 0x200)
+ return 0;
+
+ tmp = hw_config->irq;
+ if (tmp > 7)
+ return 0;
+ if (irq_translate[tmp] == -1)
+ return 0;
+
+ tmp = hw_config->dma;
+ if (tmp != 1 && tmp != 3)
+ return 0;
+
+ if (!request_region(hw_config->io_base, 16, "soundblaster")) {
+ printk(KERN_ERR "AudioTrix: SB I/O port conflict (%x)\n", hw_config->io_base);
+ return 0;
+ }
+
+ conf = 0x84; /* DMA and IRQ enable */
+ conf |= hw_config->io_base & 0x70; /* I/O address bits */
+ conf |= irq_translate[hw_config->irq];
+ if (hw_config->dma == 3)
+ conf |= 0x08;
+ trix_write(0x1b, conf);
+
+ download_boot(hw_config->io_base);
+
+ hw_config->name = "AudioTrix SB";
+ if (!sb_dsp_detect(hw_config, 0, 0, NULL)) {
+ release_region(hw_config->io_base, 16);
+ return 0;
+ }
+
+ hw_config->driver_use_1 = SB_NO_MIDI | SB_NO_MIXER | SB_NO_RECORDING;
+
+ /* Prevent false alarms */
+ old_quiet = sb_be_quiet;
+ sb_be_quiet = 1;
+
+ sb_dsp_init(hw_config, THIS_MODULE);
+
+ sb_be_quiet = old_quiet;
+ return 1;
+}
+
+static int __init probe_trix_mpu(struct address_info *hw_config)
+{
+ unsigned char conf;
+ static int irq_bits[] = {
+ -1, -1, -1, 1, 2, 3, -1, 4, -1, 5
+ };
+
+ if (hw_config->irq > 9)
+ {
+ printk(KERN_ERR "AudioTrix: Bad MPU IRQ %d\n", hw_config->irq);
+ return 0;
+ }
+ if (irq_bits[hw_config->irq] == -1)
+ {
+ printk(KERN_ERR "AudioTrix: Bad MPU IRQ %d\n", hw_config->irq);
+ return 0;
+ }
+ switch (hw_config->io_base)
+ {
+ case 0x330:
+ conf = 0x00;
+ break;
+ case 0x370:
+ conf = 0x04;
+ break;
+ case 0x3b0:
+ conf = 0x08;
+ break;
+ case 0x3f0:
+ conf = 0x0c;
+ break;
+ default:
+ return 0; /* Invalid port */
+ }
+
+ conf |= irq_bits[hw_config->irq] << 4;
+ trix_write(0x19, (trix_read(0x19) & 0x83) | conf);
+ hw_config->name = "AudioTrix Pro";
+ return probe_uart401(hw_config, THIS_MODULE);
+}
+
+static void __exit unload_trix_wss(struct address_info *hw_config)
+{
+ int dma2 = hw_config->dma2;
+
+ if (dma2 == -1)
+ dma2 = hw_config->dma;
+
+ release_region(0x390, 2);
+ release_region(hw_config->io_base, 4);
+
+ ad1848_unload(hw_config->io_base + 4,
+ hw_config->irq,
+ hw_config->dma,
+ dma2,
+ 0);
+ sound_unload_audiodev(hw_config->slots[0]);
+}
+
+static inline void __exit unload_trix_mpu(struct address_info *hw_config)
+{
+ unload_uart401(hw_config);
+}
+
+static inline void __exit unload_trix_sb(struct address_info *hw_config)
+{
+ sb_dsp_unload(hw_config, mpu);
+}
+
+static struct address_info cfg;
+static struct address_info cfg2;
+static struct address_info cfg_mpu;
+
+static int sb;
+static int fw_load;
+
+static int __initdata io = -1;
+static int __initdata irq = -1;
+static int __initdata dma = -1;
+static int __initdata dma2 = -1; /* Set this for modules that need it */
+static int __initdata sb_io = -1;
+static int __initdata sb_dma = -1;
+static int __initdata sb_irq = -1;
+static int __initdata mpu_io = -1;
+static int __initdata mpu_irq = -1;
+
+module_param(io, int, 0);
+module_param(irq, int, 0);
+module_param(dma, int, 0);
+module_param(dma2, int, 0);
+module_param(sb_io, int, 0);
+module_param(sb_dma, int, 0);
+module_param(sb_irq, int, 0);
+module_param(mpu_io, int, 0);
+module_param(mpu_irq, int, 0);
+module_param(joystick, bool, 0);
+
+static int __init init_trix(void)
+{
+ printk(KERN_INFO "MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996\n");
+
+ cfg.io_base = io;
+ cfg.irq = irq;
+ cfg.dma = dma;
+ cfg.dma2 = dma2;
+
+ cfg2.io_base = sb_io;
+ cfg2.irq = sb_irq;
+ cfg2.dma = sb_dma;
+
+ cfg_mpu.io_base = mpu_io;
+ cfg_mpu.irq = mpu_irq;
+
+ if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) {
+ printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n");
+ return -EINVAL;
+ }
+
+ if (cfg2.io_base != -1 && (cfg2.irq == -1 || cfg2.dma == -1)) {
+ printk(KERN_INFO "CONFIG_SB_IRQ and CONFIG_SB_DMA must be specified if SB_IO is set.\n");
+ return -EINVAL;
+ }
+ if (cfg_mpu.io_base != -1 && cfg_mpu.irq == -1) {
+ printk(KERN_INFO "CONFIG_MPU_IRQ must be specified if MPU_IO is set.\n");
+ return -EINVAL;
+ }
+ if (!trix_boot)
+ {
+ fw_load = 1;
+ trix_boot_len = mod_firmware_load("/etc/sound/trxpro.bin",
+ (char **) &trix_boot);
+ }
+
+ if (!request_region(0x390, 2, "AudioTrix")) {
+ printk(KERN_ERR "AudioTrix: Config port I/O conflict\n");
+ return -ENODEV;
+ }
+
+ if (!init_trix_wss(&cfg)) {
+ release_region(0x390, 2);
+ return -ENODEV;
+ }
+
+ /*
+ * We must attach in the right order to get the firmware
+ * loaded up in time.
+ */
+
+ if (cfg2.io_base != -1) {
+ sb = probe_trix_sb(&cfg2);
+ }
+
+ if (cfg_mpu.io_base != -1)
+ mpu = probe_trix_mpu(&cfg_mpu);
+
+ return 0;
+}
+
+static void __exit cleanup_trix(void)
+{
+ if (fw_load && trix_boot)
+ vfree(trix_boot);
+ if (sb)
+ unload_trix_sb(&cfg2);
+ if (mpu)
+ unload_trix_mpu(&cfg_mpu);
+ unload_trix_wss(&cfg);
+}
+
+module_init(init_trix);
+module_exit(cleanup_trix);
+
+#ifndef MODULE
+static int __init setup_trix (char *str)
+{
+ /* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, mpu_io, mpu_irq */
+ int ints[9];
+
+ str = get_options(str, ARRAY_SIZE(ints), ints);
+
+ io = ints[1];
+ irq = ints[2];
+ dma = ints[3];
+ dma2 = ints[4];
+ sb_io = ints[5];
+ sb_irq = ints[6];
+ sb_dma = ints[6];
+ mpu_io = ints[7];
+ mpu_irq = ints[8];
+
+ return 1;
+}
+
+__setup("trix=", setup_trix);
+#endif
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-23 00:06:01 +0000