diff options
Diffstat (limited to 'sound/oss/vwsnd.c')
| -rw-r--r-- | sound/oss/vwsnd.c | 3486 |
1 files changed, 3486 insertions, 0 deletions
diff --git a/sound/oss/vwsnd.c b/sound/oss/vwsnd.c new file mode 100644 index 00000000000..265423054ca --- /dev/null +++ b/sound/oss/vwsnd.c @@ -0,0 +1,3486 @@ +/* + * Sound driver for Silicon Graphics 320 and 540 Visual Workstations' + * onboard audio. See notes in Documentation/sound/oss/vwsnd . + * + * Copyright 1999 Silicon Graphics, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#undef VWSND_DEBUG /* define for debugging */ + +/* + * XXX to do - + * + * External sync. + * Rename swbuf, hwbuf, u&i, hwptr&swptr to something rational. + * Bug - if select() called before read(), pcm_setup() not called. + * Bug - output doesn't stop soon enough if process killed. + */ + +/* + * Things to test - + * + * Will readv/writev work? Write a test. + * + * insmod/rmmod 100 million times. + * + * Run I/O until int ptrs wrap around (roughly 6.2 hours @ DAT + * rate). + * + * Concurrent threads banging on mixer simultaneously, both UP + * and SMP kernels. Especially, watch for thread A changing + * OUTSRC while thread B changes gain -- both write to the same + * ad1843 register. + * + * What happens if a client opens /dev/audio then forks? + * Do two procs have /dev/audio open? Test. + * + * Pump audio through the CD, MIC and line inputs and verify that + * they mix/mute into the output. + * + * Apps: + * amp + * mpg123 + * x11amp + * mxv + * kmedia + * esound + * need more input apps + * + * Run tests while bombarding with signals. setitimer(2) will do it... */ + +/* + * This driver is organized in nine sections. + * The nine sections are: + * + * debug stuff + * low level lithium access + * high level lithium access + * AD1843 access + * PCM I/O + * audio driver + * mixer driver + * probe/attach/unload + * initialization and loadable kernel module interface + * + * That is roughly the order of increasing abstraction, so forward + * dependencies are minimal. + */ + +/* + * Locking Notes + * + * INC_USE_COUNT and DEC_USE_COUNT keep track of the number of + * open descriptors to this driver. They store it in vwsnd_use_count. + * The global device list, vwsnd_dev_list, is immutable when the IN_USE + * is true. + * + * devc->open_lock is a semaphore that is used to enforce the + * single reader/single writer rule for /dev/audio. The rule is + * that each device may have at most one reader and one writer. + * Open will block until the previous client has closed the + * device, unless O_NONBLOCK is specified. + * + * The semaphore devc->io_sema serializes PCM I/O syscalls. This + * is unnecessary in Linux 2.2, because the kernel lock + * serializes read, write, and ioctl globally, but it's there, + * ready for the brave, new post-kernel-lock world. + * + * Locking between interrupt and baselevel is handled by the + * "lock" spinlock in vwsnd_port (one lock each for read and + * write). Each half holds the lock just long enough to see what + * area it owns and update its pointers. See pcm_output() and + * pcm_input() for most of the gory stuff. + * + * devc->mix_sema serializes all mixer ioctls. This is also + * redundant because of the kernel lock. + * + * The lowest level lock is lith->lithium_lock. It is a + * spinlock which is held during the two-register tango of + * reading/writing an AD1843 register. See + * li_{read,write}_ad1843_reg(). + */ + +/* + * Sample Format Notes + * + * Lithium's DMA engine has two formats: 16-bit 2's complement + * and 8-bit unsigned . 16-bit transfers the data unmodified, 2 + * bytes per sample. 8-bit unsigned transfers 1 byte per sample + * and XORs each byte with 0x80. Lithium can input or output + * either mono or stereo in either format. + * + * The AD1843 has four formats: 16-bit 2's complement, 8-bit + * unsigned, 8-bit mu-Law and 8-bit A-Law. + * + * This driver supports five formats: AFMT_S8, AFMT_U8, + * AFMT_MU_LAW, AFMT_A_LAW, and AFMT_S16_LE. + * + * For AFMT_U8 output, we keep the AD1843 in 16-bit mode, and + * rely on Lithium's XOR to translate between U8 and S8. + * + * For AFMT_S8, AFMT_MU_LAW and AFMT_A_LAW output, we have to XOR + * the 0x80 bit in software to compensate for Lithium's XOR. + * This happens in pcm_copy_{in,out}(). + * + * Changes: + * 11-10-2000 Bartlomiej Zolnierkiewicz <bkz@linux-ide.org> + * Added some __init/__exit + */ + +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/spinlock.h> +#include <linux/smp_lock.h> +#include <linux/wait.h> +#include <linux/interrupt.h> +#include <asm/semaphore.h> +#include <asm/mach-visws/cobalt.h> + +#include "sound_config.h" + +/*****************************************************************************/ +/* debug stuff */ + +#ifdef VWSND_DEBUG + +static int shut_up = 1; + +/* + * dbgassert - called when an assertion fails. + */ + +static void dbgassert(const char *fcn, int line, const char *expr) +{ + if (in_interrupt()) + panic("ASSERTION FAILED IN INTERRUPT, %s:%s:%d %s\n", + __FILE__, fcn, line, expr); + else { + int x; + printk(KERN_ERR "ASSERTION FAILED, %s:%s:%d %s\n", + __FILE__, fcn, line, expr); + x = * (volatile int *) 0; /* force proc to exit */ + } +} + +/* + * Bunch of useful debug macros: + * + * ASSERT - print unless e nonzero (panic if in interrupt) + * DBGDO - include arbitrary code if debugging + * DBGX - debug print raw (w/o function name) + * DBGP - debug print w/ function name + * DBGE - debug print function entry + * DBGC - debug print function call + * DBGR - debug print function return + * DBGXV - debug print raw when verbose + * DBGPV - debug print when verbose + * DBGEV - debug print function entry when verbose + * DBGRV - debug print function return when verbose + */ + +#define ASSERT(e) ((e) ? (void) 0 : dbgassert(__FUNCTION__, __LINE__, #e)) +#define DBGDO(x) x +#define DBGX(fmt, args...) (in_interrupt() ? 0 : printk(KERN_ERR fmt, ##args)) +#define DBGP(fmt, args...) (DBGX("%s: " fmt, __FUNCTION__ , ##args)) +#define DBGE(fmt, args...) (DBGX("%s" fmt, __FUNCTION__ , ##args)) +#define DBGC(rtn) (DBGP("calling %s\n", rtn)) +#define DBGR() (DBGP("returning\n")) +#define DBGXV(fmt, args...) (shut_up ? 0 : DBGX(fmt, ##args)) +#define DBGPV(fmt, args...) (shut_up ? 0 : DBGP(fmt, ##args)) +#define DBGEV(fmt, args...) (shut_up ? 0 : DBGE(fmt, ##args)) +#define DBGCV(rtn) (shut_up ? 0 : DBGC(rtn)) +#define DBGRV() (shut_up ? 0 : DBGR()) + +#else /* !VWSND_DEBUG */ + +#define ASSERT(e) ((void) 0) +#define DBGDO(x) /* don't */ +#define DBGX(fmt, args...) ((void) 0) +#define DBGP(fmt, args...) ((void) 0) +#define DBGE(fmt, args...) ((void) 0) +#define DBGC(rtn) ((void) 0) +#define DBGR() ((void) 0) +#define DBGPV(fmt, args...) ((void) 0) +#define DBGXV(fmt, args...) ((void) 0) +#define DBGEV(fmt, args...) ((void) 0) +#define DBGCV(rtn) ((void) 0) +#define DBGRV() ((void) 0) + +#endif /* !VWSND_DEBUG */ + +/*****************************************************************************/ +/* low level lithium access */ + +/* + * We need to talk to Lithium registers on three pages. Here are + * the pages' offsets from the base address (0xFF001000). + */ + +enum { + LI_PAGE0_OFFSET = 0x01000 - 0x1000, /* FF001000 */ + LI_PAGE1_OFFSET = 0x0F000 - 0x1000, /* FF00F000 */ + LI_PAGE2_OFFSET = 0x10000 - 0x1000, /* FF010000 */ +}; + +/* low-level lithium data */ + +typedef struct lithium { + void * page0; /* virtual addresses */ + void * page1; + void * page2; + spinlock_t lock; /* protects codec and UST/MSC access */ +} lithium_t; + +/* + * li_create initializes the lithium_t structure and sets up vm mappings + * to access the registers. + * Returns 0 on success, -errno on failure. + */ + +static int __init li_create(lithium_t *lith, unsigned long baseaddr) +{ + static void li_destroy(lithium_t *); + + spin_lock_init(&lith->lock); + lith->page0 = ioremap_nocache(baseaddr + LI_PAGE0_OFFSET, PAGE_SIZE); + lith->page1 = ioremap_nocache(baseaddr + LI_PAGE1_OFFSET, PAGE_SIZE); + lith->page2 = ioremap_nocache(baseaddr + LI_PAGE2_OFFSET, PAGE_SIZE); + if (!lith->page0 || !lith->page1 || !lith->page2) { + li_destroy(lith); + return -ENOMEM; + } + return 0; +} + +/* + * li_destroy destroys the lithium_t structure and vm mappings. + */ + +static void li_destroy(lithium_t *lith) +{ + if (lith->page0) { + iounmap(lith->page0); + lith->page0 = NULL; + } + if (lith->page1) { + iounmap(lith->page1); + lith->page1 = NULL; + } + if (lith->page2) { + iounmap(lith->page2); + lith->page2 = NULL; + } +} + +/* + * basic register accessors - read/write long/byte + */ + +static __inline__ unsigned long li_readl(lithium_t *lith, int off) +{ + return * (volatile unsigned long *) (lith->page0 + off); +} + +static __inline__ unsigned char li_readb(lithium_t *lith, int off) +{ + return * (volatile unsigned char *) (lith->page0 + off); +} + +static __inline__ void li_writel(lithium_t *lith, int off, unsigned long val) +{ + * (volatile unsigned long *) (lith->page0 + off) = val; +} + +static __inline__ void li_writeb(lithium_t *lith, int off, unsigned char val) +{ + * (volatile unsigned char *) (lith->page0 + off) = val; +} + +/*****************************************************************************/ +/* High Level Lithium Access */ + +/* + * Lithium DMA Notes + * + * Lithium has two dedicated DMA channels for audio. They are known + * as comm1 and comm2 (communication areas 1 and 2). Comm1 is for + * input, and comm2 is for output. Each is controlled by three + * registers: BASE (base address), CFG (config) and CCTL + * (config/control). + * + * Each DMA channel points to a physically contiguous ring buffer in + * main memory of up to 8 Kbytes. (This driver always uses 8 Kb.) + * There are three pointers into the ring buffer: read, write, and + * trigger. The pointers are 8 bits each. Each pointer points to + * 32-byte "chunks" of data. The DMA engine moves 32 bytes at a time, + * so there is no finer-granularity control. + * + * In comm1, the hardware updates the write ptr, and software updates + * the read ptr. In comm2, it's the opposite: hardware updates the + * read ptr, and software updates the write ptr. I designate the + * hardware-updated ptr as the hwptr, and the software-updated ptr as + * the swptr. + * + * The trigger ptr and trigger mask are used to trigger interrupts. + * From the Lithium spec, section 5.6.8, revision of 12/15/1998: + * + * Trigger Mask Value + * + * A three bit wide field that represents a power of two mask + * that is used whenever the trigger pointer is compared to its + * respective read or write pointer. A value of zero here + * implies a mask of 0xFF and a value of seven implies a mask + * 0x01. This value can be used to sub-divide the ring buffer + * into pie sections so that interrupts monitor the progress of + * hardware from section to section. + * + * My interpretation of that is, whenever the hw ptr is updated, it is + * compared with the trigger ptr, and the result is masked by the + * trigger mask. (Actually, by the complement of the trigger mask.) + * If the result is zero, an interrupt is triggered. I.e., interrupt + * if ((hwptr & ~mask) == (trptr & ~mask)). The mask is formed from + * the trigger register value as mask = (1 << (8 - tmreg)) - 1. + * + * In yet different words, setting tmreg to 0 causes an interrupt after + * every 256 DMA chunks (8192 bytes) or once per traversal of the + * ring buffer. Setting it to 7 caues an interrupt every 2 DMA chunks + * (64 bytes) or 128 times per traversal of the ring buffer. + */ + +/* Lithium register offsets and bit definitions */ + +#define LI_HOST_CONTROLLER 0x000 +# define LI_HC_RESET 0x00008000 +# define LI_HC_LINK_ENABLE 0x00004000 +# define LI_HC_LINK_FAILURE 0x00000004 +# define LI_HC_LINK_CODEC 0x00000002 +# define LI_HC_LINK_READY 0x00000001 + +#define LI_INTR_STATUS 0x010 +#define LI_INTR_MASK 0x014 +# define LI_INTR_LINK_ERR 0x00008000 +# define LI_INTR_COMM2_TRIG 0x00000008 +# define LI_INTR_COMM2_UNDERFLOW 0x00000004 +# define LI_INTR_COMM1_TRIG 0x00000002 +# define LI_INTR_COMM1_OVERFLOW 0x00000001 + +#define LI_CODEC_COMMAND 0x018 +# define LI_CC_BUSY 0x00008000 +# define LI_CC_DIR 0x00000080 +# define LI_CC_DIR_RD LI_CC_DIR +# define LI_CC_DIR_WR (!LI_CC_DIR) +# define LI_CC_ADDR_MASK 0x0000007F + +#define LI_CODEC_DATA 0x01C + +#define LI_COMM1_BASE 0x100 +#define LI_COMM1_CTL 0x104 +# define LI_CCTL_RESET 0x80000000 +# define LI_CCTL_SIZE 0x70000000 +# define LI_CCTL_DMA_ENABLE 0x08000000 +# define LI_CCTL_TMASK 0x07000000 /* trigger mask */ +# define LI_CCTL_TPTR 0x00FF0000 /* trigger pointer */ +# define LI_CCTL_RPTR 0x0000FF00 +# define LI_CCTL_WPTR 0x000000FF +#define LI_COMM1_CFG 0x108 +# define LI_CCFG_LOCK 0x00008000 +# define LI_CCFG_SLOT 0x00000070 +# define LI_CCFG_DIRECTION 0x00000008 +# define LI_CCFG_DIR_IN (!LI_CCFG_DIRECTION) +# define LI_CCFG_DIR_OUT LI_CCFG_DIRECTION +# define LI_CCFG_MODE 0x00000004 +# define LI_CCFG_MODE_MONO (!LI_CCFG_MODE) +# define LI_CCFG_MODE_STEREO LI_CCFG_MODE +# define LI_CCFG_FORMAT 0x00000003 +# define LI_CCFG_FMT_8BIT 0x00000000 +# define LI_CCFG_FMT_16BIT 0x00000001 +#define LI_COMM2_BASE 0x10C +#define LI_COMM2_CTL 0x110 + /* bit definitions are the same as LI_COMM1_CTL */ +#define LI_COMM2_CFG 0x114 + /* bit definitions are the same as LI_COMM1_CFG */ + +#define LI_UST_LOW 0x200 /* 64-bit Unadjusted System Time is */ +#define LI_UST_HIGH 0x204 /* microseconds since boot */ + +#define LI_AUDIO1_UST 0x300 /* UST-MSC pairs */ +#define LI_AUDIO1_MSC 0x304 /* MSC (Media Stream Counter) */ +#define LI_AUDIO2_UST 0x308 /* counts samples actually */ +#define LI_AUDIO2_MSC 0x30C /* processed as of time UST */ + +/* + * Lithium's DMA engine operates on chunks of 32 bytes. We call that + * a DMACHUNK. + */ + +#define DMACHUNK_SHIFT 5 +#define DMACHUNK_SIZE (1 << DMACHUNK_SHIFT) +#define BYTES_TO_CHUNKS(bytes) ((bytes) >> DMACHUNK_SHIFT) +#define CHUNKS_TO_BYTES(chunks) ((chunks) << DMACHUNK_SHIFT) + +/* + * Two convenient macros to shift bitfields into/out of position. + * + * Observe that (mask & -mask) is (1 << low_set_bit_of(mask)). + * As long as mask is constant, we trust the compiler will change the + * multipy and divide into shifts. + */ + +#define SHIFT_FIELD(val, mask) (((val) * ((mask) & -(mask))) & (mask)) +#define UNSHIFT_FIELD(val, mask) (((val) & (mask)) / ((mask) & -(mask))) + +/* + * dma_chan_desc is invariant information about a Lithium + * DMA channel. There are two instances, li_comm1 and li_comm2. + * + * Note that the CCTL register fields are write ptr and read ptr, but what + * we care about are which pointer is updated by software and which by + * hardware. + */ + +typedef struct dma_chan_desc { + int basereg; + int cfgreg; + int ctlreg; + int hwptrreg; + int swptrreg; + int ustreg; + int mscreg; + unsigned long swptrmask; + int ad1843_slot; + int direction; /* LI_CCTL_DIR_IN/OUT */ +} dma_chan_desc_t; + +static const dma_chan_desc_t li_comm1 = { + LI_COMM1_BASE, /* base register offset */ + LI_COMM1_CFG, /* config register offset */ + LI_COMM1_CTL, /* control register offset */ + LI_COMM1_CTL + 0, /* hw ptr reg offset (write ptr) */ + LI_COMM1_CTL + 1, /* sw ptr reg offset (read ptr) */ + LI_AUDIO1_UST, /* ust reg offset */ + LI_AUDIO1_MSC, /* msc reg offset */ + LI_CCTL_RPTR, /* sw ptr bitmask in ctlval */ + 2, /* ad1843 serial slot */ + LI_CCFG_DIR_IN /* direction */ +}; + +static const dma_chan_desc_t li_comm2 = { + LI_COMM2_BASE, /* base register offset */ + LI_COMM2_CFG, /* config register offset */ + LI_COMM2_CTL, /* control register offset */ + LI_COMM2_CTL + 1, /* hw ptr reg offset (read ptr) */ + LI_COMM2_CTL + 0, /* sw ptr reg offset (writr ptr) */ + LI_AUDIO2_UST, /* ust reg offset */ + LI_AUDIO2_MSC, /* msc reg offset */ + LI_CCTL_WPTR, /* sw ptr bitmask in ctlval */ + 2, /* ad1843 serial slot */ + LI_CCFG_DIR_OUT /* direction */ +}; + +/* + * dma_chan is variable information about a Lithium DMA channel. + * + * The desc field points to invariant information. + * The lith field points to a lithium_t which is passed + * to li_read* and li_write* to access the registers. + * The *val fields shadow the lithium registers' contents. + */ + +typedef struct dma_chan { + const dma_chan_desc_t *desc; + lithium_t *lith; + unsigned long baseval; + unsigned long cfgval; + unsigned long ctlval; +} dma_chan_t; + +/* + * ustmsc is a UST/MSC pair (Unadjusted System Time/Media Stream Counter). + * UST is time in microseconds since the system booted, and MSC is a + * counter that increments with every audio sample. + */ + +typedef struct ustmsc { + unsigned long long ust; + unsigned long msc; +} ustmsc_t; + +/* + * li_ad1843_wait waits until lithium says the AD1843 register + * exchange is not busy. Returns 0 on success, -EBUSY on timeout. + * + * Locking: must be called with lithium_lock held. + */ + +static int li_ad1843_wait(lithium_t *lith) +{ + unsigned long later = jiffies + 2; + while (li_readl(lith, LI_CODEC_COMMAND) & LI_CC_BUSY) + if (time_after_eq(jiffies, later)) + return -EBUSY; + return 0; +} + +/* + * li_read_ad1843_reg returns the current contents of a 16 bit AD1843 register. + * + * Returns unsigned register value on success, -errno on failure. + */ + +static int li_read_ad1843_reg(lithium_t *lith, int reg) +{ + int val; + + ASSERT(!in_interrupt()); + spin_lock(&lith->lock); + { + val = li_ad1843_wait(lith); + if (val == 0) { + li_writel(lith, LI_CODEC_COMMAND, LI_CC_DIR_RD | reg); + val = li_ad1843_wait(lith); + } + if (val == 0) + val = li_readl(lith, LI_CODEC_DATA); + } + spin_unlock(&lith->lock); + + DBGXV("li_read_ad1843_reg(lith=0x%p, reg=%d) returns 0x%04x\n", + lith, reg, val); + + return val; +} + +/* + * li_write_ad1843_reg writes the specified value to a 16 bit AD1843 register. + */ + +static void li_write_ad1843_reg(lithium_t *lith, int reg, int newval) +{ + spin_lock(&lith->lock); + { + if (li_ad1843_wait(lith) == 0) { + li_writel(lith, LI_CODEC_DATA, newval); + li_writel(lith, LI_CODEC_COMMAND, LI_CC_DIR_WR | reg); + } + } + spin_unlock(&lith->lock); +} + +/* + * li_setup_dma calculates all the register settings for DMA in a particular + * mode. It takes too many arguments. + */ + +static void li_setup_dma(dma_chan_t *chan, + const dma_chan_desc_t *desc, + lithium_t *lith, + unsigned long buffer_paddr, + int bufshift, + int fragshift, + int channels, + int sampsize) +{ + unsigned long mode, format; + unsigned long size, tmask; + + DBGEV("(chan=0x%p, desc=0x%p, lith=0x%p, buffer_paddr=0x%lx, " + "bufshift=%d, fragshift=%d, channels=%d, sampsize=%d)\n", + chan, desc, lith, buffer_paddr, + bufshift, fragshift, channels, sampsize); + + /* Reset the channel first. */ + + li_writel(lith, desc->ctlreg, LI_CCTL_RESET); + + ASSERT(channels == 1 || channels == 2); + if (channels == 2) + mode = LI_CCFG_MODE_STEREO; + else + mode = LI_CCFG_MODE_MONO; + ASSERT(sampsize == 1 || sampsize == 2); + if (sampsize == 2) + format = LI_CCFG_FMT_16BIT; + else + format = LI_CCFG_FMT_8BIT; + chan->desc = desc; + chan->lith = lith; + + /* + * Lithium DMA address register takes a 40-bit physical + * address, right-shifted by 8 so it fits in 32 bits. Bit 37 + * must be set -- it enables cache coherence. + */ + + ASSERT(!(buffer_paddr & 0xFF)); + chan->baseval = (buffer_paddr >> 8) | 1 << (37 - 8); + + chan->cfgval = (!LI_CCFG_LOCK | + SHIFT_FIELD(desc->ad1843_slot, LI_CCFG_SLOT) | + desc->direction | + mode | + format); + + size = bufshift - 6; + tmask = 13 - fragshift; /* See Lithium DMA Notes above. */ + ASSERT(size >= 2 && size <= 7); + ASSERT(tmask >= 1 && tmask <= 7); + chan->ctlval = (!LI_CCTL_RESET | + SHIFT_FIELD(size, LI_CCTL_SIZE) | + !LI_CCTL_DMA_ENABLE | + SHIFT_FIELD(tmask, LI_CCTL_TMASK) | + SHIFT_FIELD(0, LI_CCTL_TPTR)); + + DBGPV("basereg 0x%x = 0x%lx\n", desc->basereg, chan->baseval); + DBGPV("cfgreg 0x%x = 0x%lx\n", desc->cfgreg, chan->cfgval); + DBGPV("ctlreg 0x%x = 0x%lx\n", desc->ctlreg, chan->ctlval); + + li_writel(lith, desc->basereg, chan->baseval); + li_writel(lith, desc->cfgreg, chan->cfgval); + li_writel(lith, desc->ctlreg, chan->ctlval); + + DBGRV(); +} + +static void li_shutdown_dma(dma_chan_t *chan) +{ + lithium_t *lith = chan->lith; + void * lith1 = lith->page1; + + DBGEV("(chan=0x%p)\n", chan); + + chan->ctlval &= ~LI_CCTL_DMA_ENABLE; + DBGPV("ctlreg 0x%x = 0x%lx\n", chan->desc->ctlreg, chan->ctlval); + li_writel(lith, chan->desc->ctlreg, chan->ctlval); + + /* + * Offset 0x500 on Lithium page 1 is an undocumented, + * unsupported register that holds the zero sample value. + * Lithium is supposed to output zero samples when DMA is + * inactive, and repeat the last sample when DMA underflows. + * But it has a bug, where, after underflow occurs, the zero + * sample is not reset. + * + * I expect this to break in a future rev of Lithium. + */ + + if (lith1 && chan->desc->direction == LI_CCFG_DIR_OUT) + * (volatile unsigned long *) (lith1 + 0x500) = 0; +} + +/* + * li_activate_dma always starts dma at the beginning of the buffer. + * + * N.B., these may be called from interrupt. + */ + +static __inline__ void li_activate_dma(dma_chan_t *chan) +{ + chan->ctlval |= LI_CCTL_DMA_ENABLE; + DBGPV("ctlval = 0x%lx\n", chan->ctlval); + li_writel(chan->lith, chan->desc->ctlreg, chan->ctlval); +} + +static void li_deactivate_dma(dma_chan_t *chan) +{ + lithium_t *lith = chan->lith; + void * lith2 = lith->page2; + + chan->ctlval &= ~(LI_CCTL_DMA_ENABLE | LI_CCTL_RPTR | LI_CCTL_WPTR); + DBGPV("ctlval = 0x%lx\n", chan->ctlval); + DBGPV("ctlreg 0x%x = 0x%lx\n", chan->desc->ctlreg, chan->ctlval); + li_writel(lith, chan->desc->ctlreg, chan->ctlval); + + /* + * Offsets 0x98 and 0x9C on Lithium page 2 are undocumented, + * unsupported registers that are internal copies of the DMA + * read and write pointers. Because of a Lithium bug, these + * registers aren't zeroed correctly when DMA is shut off. So + * we whack them directly. + * + * I expect this to break in a future rev of Lithium. + */ + + if (lith2 && chan->desc->direction == LI_CCFG_DIR_OUT) { + * (volatile unsigned long *) (lith2 + 0x98) = 0; + * (volatile unsigned long *) (lith2 + 0x9C) = 0; + } +} + +/* + * read/write the ring buffer pointers. These routines' arguments and results + * are byte offsets from the beginning of the ring buffer. + */ + +static __inline__ int li_read_swptr(dma_chan_t *chan) +{ + const unsigned long mask = chan->desc->swptrmask; + + return CHUNKS_TO_BYTES(UNSHIFT_FIELD(chan->ctlval, mask)); +} + +static __inline__ int li_read_hwptr(dma_chan_t *chan) +{ + return CHUNKS_TO_BYTES(li_readb(chan->lith, chan->desc->hwptrreg)); +} + +static __inline__ void li_write_swptr(dma_chan_t *chan, int val) +{ + const unsigned long mask = chan->desc->swptrmask; + + ASSERT(!(val & ~CHUNKS_TO_BYTES(0xFF))); + val = BYTES_TO_CHUNKS(val); + chan->ctlval = (chan->ctlval & ~mask) | SHIFT_FIELD(val, mask); + li_writeb(chan->lith, chan->desc->swptrreg, val); +} + +/* li_read_USTMSC() returns a UST/MSC pair for the given channel. */ + +static void li_read_USTMSC(dma_chan_t *chan, ustmsc_t *ustmsc) +{ + lithium_t *lith = chan->lith; + const dma_chan_desc_t *desc = chan->desc; + unsigned long now_low, now_high0, now_high1, chan_ust; + + spin_lock(&lith->lock); + { + /* + * retry until we do all five reads without the + * high word changing. (High word increments + * every 2^32 microseconds, i.e., not often) + */ + do { + now_high0 = li_readl(lith, LI_UST_HIGH); + now_low = li_readl(lith, LI_UST_LOW); + + /* + * Lithium guarantees these two reads will be + * atomic -- ust will not increment after msc + * is read. + */ + + ustmsc->msc = li_readl(lith, desc->mscreg); + chan_ust = li_readl(lith, desc->ustreg); + + now_high1 = li_readl(lith, LI_UST_HIGH); + } while (now_high0 != now_high1); + } + spin_unlock(&lith->lock); + ustmsc->ust = ((unsigned long long) now_high0 << 32 | chan_ust); +} + +static void li_enable_interrupts(lithium_t *lith, unsigned int mask) +{ + DBGEV("(lith=0x%p, mask=0x%x)\n", lith, mask); + + /* clear any already-pending interrupts. */ + + li_writel(lith, LI_INTR_STATUS, mask); + + /* enable the interrupts. */ + + mask |= li_readl(lith, LI_INTR_MASK); + li_writel(lith, LI_INTR_MASK, mask); +} + +static void li_disable_interrupts(lithium_t *lith, unsigned int mask) +{ + unsigned int keepmask; + + DBGEV("(lith=0x%p, mask=0x%x)\n", lith, mask); + + /* disable the interrupts */ + + keepmask = li_readl(lith, LI_INTR_MASK) & ~mask; + li_writel(lith, LI_INTR_MASK, keepmask); + + /* clear any pending interrupts. */ + + li_writel(lith, LI_INTR_STATUS, mask); +} + +/* Get the interrupt status and clear all pending interrupts. */ + +static unsigned int li_get_clear_intr_status(lithium_t *lith) +{ + unsigned int status; + + status = li_readl(lith, LI_INTR_STATUS); + li_writel(lith, LI_INTR_STATUS, ~0); + return status & li_readl(lith, LI_INTR_MASK); +} + +static int li_init(lithium_t *lith) +{ + /* 1. System power supplies stabilize. */ + + /* 2. Assert the ~RESET signal. */ + + li_writel(lith, LI_HOST_CONTROLLER, LI_HC_RESET); + udelay(1); + + /* 3. Deassert the ~RESET signal and enter a wait period to allow + the AD1843 internal clocks and the external crystal oscillator + to stabilize. */ + + li_writel(lith, LI_HOST_CONTROLLER, LI_HC_LINK_ENABLE); + udelay(1); + + return 0; +} + +/*****************************************************************************/ +/* AD1843 access */ + +/* + * AD1843 bitfield definitions. All are named as in the AD1843 data + * sheet, with ad1843_ prepended and individual bit numbers removed. + * + * E.g., bits LSS0 through LSS2 become ad1843_LSS. + * + * Only the bitfields we need are defined. + */ + +typedef struct ad1843_bitfield { + char reg; + char lo_bit; + char nbits; +} ad1843_bitfield_t; + +static const ad1843_bitfield_t + ad1843_PDNO = { 0, 14, 1 }, /* Converter Power-Down Flag */ + ad1843_INIT = { 0, 15, 1 }, /* Clock Initialization Flag */ + ad1843_RIG = { 2, 0, 4 }, /* Right ADC Input Gain */ + ad1843_RMGE = { 2, 4, 1 }, /* Right ADC Mic Gain Enable */ + ad1843_RSS = { 2, 5, 3 }, /* Right ADC Source Select */ + ad1843_LIG = { 2, 8, 4 }, /* Left ADC Input Gain */ + ad1843_LMGE = { 2, 12, 1 }, /* Left ADC Mic Gain Enable */ + ad1843_LSS = { 2, 13, 3 }, /* Left ADC Source Select */ + ad1843_RX1M = { 4, 0, 5 }, /* Right Aux 1 Mix Gain/Atten */ + ad1843_RX1MM = { 4, 7, 1 }, /* Right Aux 1 Mix Mute */ + ad1843_LX1M = { 4, 8, 5 }, /* Left Aux 1 Mix Gain/Atten */ + ad1843_LX1MM = { 4, 15, 1 }, /* Left Aux 1 Mix Mute */ + ad1843_RX2M = { 5, 0, 5 }, /* Right Aux 2 Mix Gain/Atten */ + ad1843_RX2MM = { 5, 7, 1 }, /* Right Aux 2 Mix Mute */ + ad1843_LX2M = { 5, 8, 5 }, /* Left Aux 2 Mix Gain/Atten */ + ad1843_LX2MM = { 5, 15, 1 }, /* Left Aux 2 Mix Mute */ + ad1843_RMCM = { 7, 0, 5 }, /* Right Mic Mix Gain/Atten */ + ad1843_RMCMM = { 7, 7, 1 }, /* Right Mic Mix Mute */ + ad1843_LMCM = { 7, 8, 5 }, /* Left Mic Mix Gain/Atten */ + ad1843_LMCMM = { 7, 15, 1 }, /* Left Mic Mix Mute */ + ad1843_HPOS = { 8, 4, 1 }, /* Headphone Output Voltage Swing */ + ad1843_HPOM = { 8, 5, 1 }, /* Headphone Output Mute */ + ad1843_RDA1G = { 9, 0, 6 }, /* Right DAC1 Analog/Digital Gain */ + ad1843_RDA1GM = { 9, 7, 1 }, /* Right DAC1 Analog Mute */ + ad1843_LDA1G = { 9, 8, 6 }, /* Left DAC1 Analog/Digital Gain */ + ad1843_LDA1GM = { 9, 15, 1 }, /* Left DAC1 Analog Mute */ + ad1843_RDA1AM = { 11, 7, 1 }, /* Right DAC1 Digital Mute */ + ad1843_LDA1AM = { 11, 15, 1 }, /* Left DAC1 Digital Mute */ + ad1843_ADLC = { 15, 0, 2 }, /* ADC Left Sample Rate Source */ + ad1843_ADRC = { 15, 2, 2 }, /* ADC Right Sample Rate Source */ + ad1843_DA1C = { 15, 8, 2 }, /* DAC1 Sample Rate Source */ + ad1843_C1C = { 17, 0, 16 }, /* Clock 1 Sample Rate Select */ + ad1843_C2C = { 20, 0, 16 }, /* Clock 1 Sample Rate Select */ + ad1843_DAADL = { 25, 4, 2 }, /* Digital ADC Left Source Select */ + ad1843_DAADR = { 25, 6, 2 }, /* Digital ADC Right Source Select */ + ad1843_DRSFLT = { 25, 15, 1 }, /* Digital Reampler Filter Mode */ + ad1843_ADLF = { 26, 0, 2 }, /* ADC Left Channel Data Format */ + ad1843_ADRF = { 26, 2, 2 }, /* ADC Right Channel Data Format */ + ad1843_ADTLK = { 26, 4, 1 }, /* ADC Transmit Lock Mode Select */ + ad1843_SCF = { 26, 7, 1 }, /* SCLK Frequency Select */ + ad1843_DA1F = { 26, 8, 2 }, /* DAC1 Data Format Select */ + ad1843_DA1SM = { 26, 14, 1 }, /* DAC1 Stereo/Mono Mode Select */ + ad1843_ADLEN = { 27, 0, 1 }, /* ADC Left Channel Enable */ + ad1843_ADREN = { 27, 1, 1 }, /* ADC Right Channel Enable */ + ad1843_AAMEN = { 27, 4, 1 }, /* Analog to Analog Mix Enable */ + ad1843_ANAEN = { 27, 7, 1 }, /* Analog Channel Enable */ + ad1843_DA1EN = { 27, 8, 1 }, /* DAC1 Enable */ + ad1843_DA2EN = { 27, 9, 1 }, /* DAC2 Enable */ + ad1843_C1EN = { 28, 11, 1 }, /* Clock Generator 1 Enable */ + ad1843_C2EN = { 28, 12, 1 }, /* Clock Generator 2 Enable */ + ad1843_PDNI = { 28, 15, 1 }; /* Converter Power Down */ + +/* + * The various registers of the AD1843 use three different formats for + * specifying gain. The ad1843_gain structure parameterizes the + * formats. + */ + +typedef struct ad1843_gain { + + int negative; /* nonzero if gain is negative. */ + const ad1843_bitfield_t *lfield; + const ad1843_bitfield_t *rfield; + +} ad1843_gain_t; + +static const ad1843_gain_t ad1843_gain_RECLEV + = { 0, &ad1843_LIG, &ad1843_RIG }; +static const ad1843_gain_t ad1843_gain_LINE + = { 1, &ad1843_LX1M, &ad1843_RX1M }; +static const ad1843_gain_t ad1843_gain_CD + = { 1, &ad1843_LX2M, &ad1843_RX2M }; +static const ad1843_gain_t ad1843_gain_MIC + = { 1, &ad1843_LMCM, &ad1843_RMCM }; +static const ad1843_gain_t ad1843_gain_PCM + = { 1, &ad1843_LDA1G, &ad1843_RDA1G }; + +/* read the current value of an AD1843 bitfield. */ + +static int ad1843_read_bits(lithium_t *lith, const ad1843_bitfield_t *field) +{ + int w = li_read_ad1843_reg(lith, field->reg); + int val = w >> field->lo_bit & ((1 << field->nbits) - 1); + + DBGXV("ad1843_read_bits(lith=0x%p, field->{%d %d %d}) returns 0x%x\n", + lith, field->reg, field->lo_bit, field->nbits, val); + + return val; +} + +/* + * write a new value to an AD1843 bitfield and return the old value. + */ + +static int ad1843_write_bits(lithium_t *lith, + const ad1843_bitfield_t *field, + int newval) +{ + int w = li_read_ad1843_reg(lith, field->reg); + int mask = ((1 << field->nbits) - 1) << field->lo_bit; + int oldval = (w & mask) >> field->lo_bit; + int newbits = (newval << field->lo_bit) & mask; + w = (w & ~mask) | newbits; + (void) li_write_ad1843_reg(lith, field->reg, w); + + DBGXV("ad1843_write_bits(lith=0x%p, field->{%d %d %d}, val=0x%x) " + "returns 0x%x\n", + lith, field->reg, field->lo_bit, field->nbits, newval, + oldval); + + return oldval; +} + +/* + * ad1843_read_multi reads multiple bitfields from the same AD1843 + * register. It uses a single read cycle to do it. (Reading the + * ad1843 requires 256 bit times at 12.288 MHz, or nearly 20 + * microseconds.) + * + * Called ike this. + * + * ad1843_read_multi(lith, nfields, + * &ad1843_FIELD1, &val1, + * &ad1843_FIELD2, &val2, ...); + */ + +static void ad1843_read_multi(lithium_t *lith, int argcount, ...) +{ + va_list ap; + const ad1843_bitfield_t *fp; + int w = 0, mask, *value, reg = -1; + + va_start(ap, argcount); + while (--argcount >= 0) { + fp = va_arg(ap, const ad1843_bitfield_t *); + value = va_arg(ap, int *); + if (reg == -1) { + reg = fp->reg; + w = li_read_ad1843_reg(lith, reg); + } + ASSERT(reg == fp->reg); + mask = (1 << fp->nbits) - 1; + *value = w >> fp->lo_bit & mask; + } + va_end(ap); +} + +/* + * ad1843_write_multi stores multiple bitfields into the same AD1843 + * register. It uses one read and one write cycle to do it. + * + * Called like this. + * + * ad1843_write_multi(lith, nfields, + * &ad1843_FIELD1, val1, + * &ad1843_FIELF2, val2, ...); + */ + +static void ad1843_write_multi(lithium_t *lith, int argcount, ...) +{ + va_list ap; + int reg; + const ad1843_bitfield_t *fp; + int value; + int w, m, mask, bits; + + mask = 0; + bits = 0; + reg = -1; + + va_start(ap, argcount); + while (--argcount >= 0) { + fp = va_arg(ap, const ad1843_bitfield_t *); + value = va_arg(ap, int); + if (reg == -1) + reg = fp->reg; + ASSERT(fp->reg == reg); + m = ((1 << fp->nbits) - 1) << fp->lo_bit; + mask |= m; + bits |= (value << fp->lo_bit) & m; + } + va_end(ap); + ASSERT(!(bits & ~mask)); + if (~mask & 0xFFFF) + w = li_read_ad1843_reg(lith, reg); + else + w = 0; + w = (w & ~mask) | bits; + (void) li_write_ad1843_reg(lith, reg, w); +} + +/* + * ad1843_get_gain reads the specified register and extracts the gain value + * using the supplied gain type. It returns the gain in OSS format. + */ + +static int ad1843_get_gain(lithium_t *lith, const ad1843_gain_t *gp) +{ + int lg, rg; + unsigned short mask = (1 << gp->lfield->nbits) - 1; + + ad1843_read_multi(lith, 2, gp->lfield, &lg, gp->rfield, &rg); + if (gp->negative) { + lg = mask - lg; + rg = mask - rg; + } + lg = (lg * 100 + (mask >> 1)) / mask; + rg = (rg * 100 + (mask >> 1)) / mask; + return lg << 0 | rg << 8; +} + +/* + * Set an audio channel's gain. Converts from OSS format to AD1843's + * format. + * + * Returns the new gain, which may be lower than the old gain. + */ + +static int ad1843_set_gain(lithium_t *lith, + const ad1843_gain_t *gp, + int newval) +{ + unsigned short mask = (1 << gp->lfield->nbits) - 1; + + int lg = newval >> 0 & 0xFF; + int rg = newval >> 8; + if (lg < 0 || lg > 100 || rg < 0 || rg > 100) + return -EINVAL; + lg = (lg * mask + (mask >> 1)) / 100; + rg = (rg * mask + (mask >> 1)) / 100; + if (gp->negative) { + lg = mask - lg; + rg = mask - rg; + } + ad1843_write_multi(lith, 2, gp->lfield, lg, gp->rfield, rg); + return ad1843_get_gain(lith, gp); +} + +/* Returns the current recording source, in OSS format. */ + +static int ad1843_get_recsrc(lithium_t *lith) +{ + int ls = ad1843_read_bits(lith, &ad1843_LSS); + + switch (ls) { + case 1: + return SOUND_MASK_MIC; + case 2: + return SOUND_MASK_LINE; + case 3: + return SOUND_MASK_CD; + case 6: + return SOUND_MASK_PCM; + default: + ASSERT(0); + return -1; + } +} + +/* + * Enable/disable digital resample mode in the AD1843. + * + * The AD1843 requires that ADL, ADR, DA1 and DA2 be powered down + * while switching modes. So we save DA1's state (DA2's state is not + * interesting), power them down, switch into/out of resample mode, + * power them up, and restore state. + * + * This will cause audible glitches if D/A or A/D is going on, so the + * driver disallows that (in mixer_write_ioctl()). + * + * The open question is, is this worth doing? I'm leaving it in, + * because it's written, but... + */ + +static void ad1843_set_resample_mode(lithium_t *lith, int onoff) +{ + /* Save DA1 mute and gain (addr 9 is DA1 analog gain/attenuation) */ + int save_da1 = li_read_ad1843_reg(lith, 9); + + /* Power down A/D and D/A. */ + ad1843_write_multi(lith, 4, + &ad1843_DA1EN, 0, + &ad1843_DA2EN, 0, + &ad1843_ADLEN, 0, + &ad1843_ADREN, 0); + + /* Switch mode */ + ASSERT(onoff == 0 || onoff == 1); + ad1843_write_bits(lith, &ad1843_DRSFLT, onoff); + + /* Power up A/D and D/A. */ + ad1843_write_multi(lith, 3, + &ad1843_DA1EN, 1, + &ad1843_ADLEN, 1, + &ad1843_ADREN, 1); + + /* Restore DA1 mute and gain. */ + li_write_ad1843_reg(lith, 9, save_da1); +} + +/* + * Set recording source. Arg newsrc specifies an OSS channel mask. + * + * The complication is that when we switch into/out of loopback mode + * (i.e., src = SOUND_MASK_PCM), we change the AD1843 into/out of + * digital resampling mode. + * + * Returns newsrc on success, -errno on failure. + */ + +static int ad1843_set_recsrc(lithium_t *lith, int newsrc) +{ + int bits; + int oldbits; + + switch (newsrc) { + case SOUND_MASK_PCM: + bits = 6; + break; + + case SOUND_MASK_MIC: + bits = 1; + break; + + case SOUND_MASK_LINE: + bits = 2; + break; + + case SOUND_MASK_CD: + bits = 3; + break; + + default: + return -EINVAL; + } + oldbits = ad1843_read_bits(lith, &ad1843_LSS); + if (newsrc == SOUND_MASK_PCM && oldbits != 6) { + DBGP("enabling digital resample mode\n"); + ad1843_set_resample_mode(lith, 1); + ad1843_write_multi(lith, 2, + &ad1843_DAADL, 2, + &ad1843_DAADR, 2); + } else if (newsrc != SOUND_MASK_PCM && oldbits == 6) { + DBGP("disabling digital resample mode\n"); + ad1843_set_resample_mode(lith, 0); + ad1843_write_multi(lith, 2, + &ad1843_DAADL, 0, + &ad1843_DAADR, 0); + } + ad1843_write_multi(lith, 2, &ad1843_LSS, bits, &ad1843_RSS, bits); + return newsrc; +} + +/* + * Return current output sources, in OSS format. + */ + +static int ad1843_get_outsrc(lithium_t *lith) +{ + int pcm, line, mic, cd; + + pcm = ad1843_read_bits(lith, &ad1843_LDA1GM) ? 0 : SOUND_MASK_PCM; + line = ad1843_read_bits(lith, &ad1843_LX1MM) ? 0 : SOUND_MASK_LINE; + cd = ad1843_read_bits(lith, &ad1843_LX2MM) ? 0 : SOUND_MASK_CD; + mic = ad1843_read_bits(lith, &ad1843_LMCMM) ? 0 : SOUND_MASK_MIC; + + return pcm | line | cd | mic; +} + +/* + * Set output sources. Arg is a mask of active sources in OSS format. + * + * Returns source mask on success, -errno on failure. + */ + +static int ad1843_set_outsrc(lithium_t *lith, int mask) +{ + int pcm, line, mic, cd; + + if (mask & ~(SOUND_MASK_PCM | SOUND_MASK_LINE | + SOUND_MASK_CD | SOUND_MASK_MIC)) + return -EINVAL; + pcm = (mask & SOUND_MASK_PCM) ? 0 : 1; + line = (mask & SOUND_MASK_LINE) ? 0 : 1; + mic = (mask & SOUND_MASK_MIC) ? 0 : 1; + cd = (mask & SOUND_MASK_CD) ? 0 : 1; + + ad1843_write_multi(lith, 2, &ad1843_LDA1GM, pcm, &ad1843_RDA1GM, pcm); + ad1843_write_multi(lith, 2, &ad1843_LX1MM, line, &ad1843_RX1MM, line); + ad1843_write_multi(lith, 2, &ad1843_LX2MM, cd, &ad1843_RX2MM, cd); + ad1843_write_multi(lith, 2, &ad1843_LMCMM, mic, &ad1843_RMCMM, mic); + + return mask; +} + +/* Setup ad1843 for D/A conversion. */ + +static void ad1843_setup_dac(lithium_t *lith, + int framerate, + int fmt, + int channels) +{ + int ad_fmt = 0, ad_mode = 0; + + DBGEV("(lith=0x%p, framerate=%d, fmt=%d, channels=%d)\n", + lith, framerate, fmt, channels); + + switch (fmt) { + case AFMT_S8: ad_fmt = 1; break; + case AFMT_U8: ad_fmt = 1; break; + case AFMT_S16_LE: ad_fmt = 1; break; + case AFMT_MU_LAW: ad_fmt = 2; break; + case AFMT_A_LAW: ad_fmt = 3; break; + default: ASSERT(0); + } + + switch (channels) { + case 2: ad_mode = 0; break; + case 1: ad_mode = 1; break; + default: ASSERT(0); + } + + DBGPV("ad_mode = %d, ad_fmt = %d\n", ad_mode, ad_fmt); + ASSERT(framerate >= 4000 && framerate <= 49000); + ad1843_write_bits(lith, &ad1843_C1C, framerate); + ad1843_write_multi(lith, 2, + &ad1843_DA1SM, ad_mode, &ad1843_DA1F, ad_fmt); +} + +static void ad1843_shutdown_dac(lithium_t *lith) +{ + ad1843_write_bits(lith, &ad1843_DA1F, 1); +} + +static void ad1843_setup_adc(lithium_t *lith, int framerate, int fmt, int channels) +{ + int da_fmt = 0; + + DBGEV("(lith=0x%p, framerate=%d, fmt=%d, channels=%d)\n", + lith, framerate, fmt, channels); + + switch (fmt) { + case AFMT_S8: da_fmt = 1; break; + case AFMT_U8: da_fmt = 1; break; + case AFMT_S16_LE: da_fmt = 1; break; + case AFMT_MU_LAW: da_fmt = 2; break; + case AFMT_A_LAW: da_fmt = 3; break; + default: ASSERT(0); + } + + DBGPV("da_fmt = %d\n", da_fmt); + ASSERT(framerate >= 4000 && framerate <= 49000); + ad1843_write_bits(lith, &ad1843_C2C, framerate); + ad1843_write_multi(lith, 2, + &ad1843_ADLF, da_fmt, &ad1843_ADRF, da_fmt); +} + +static void ad1843_shutdown_adc(lithium_t *lith) +{ + /* nothing to do */ +} + +/* + * Fully initialize the ad1843. As described in the AD1843 data + * sheet, section "START-UP SEQUENCE". The numbered comments are + * subsection headings from the data sheet. See the data sheet, pages + * 52-54, for more info. + * + * return 0 on success, -errno on failure. */ + +static int __init ad1843_init(lithium_t *lith) +{ + unsigned long later; + int err; + + err = li_init(lith); + if (err) + return err; + + if (ad1843_read_bits(lith, &ad1843_INIT) != 0) { + printk(KERN_ERR "vwsnd sound: AD1843 won't initialize\n"); + return -EIO; + } + + ad1843_write_bits(lith, &ad1843_SCF, 1); + + /* 4. Put the conversion resources into standby. */ + + ad1843_write_bits(lith, &ad1843_PDNI, 0); + later = jiffies + HZ / 2; /* roughly half a second */ + DBGDO(shut_up++); + while (ad1843_read_bits(lith, &ad1843_PDNO)) { + if (time_after(jiffies, later)) { + printk(KERN_ERR + "vwsnd audio: AD1843 won't power up\n"); + return -EIO; + } + schedule(); + } + DBGDO(shut_up--); + + /* 5. Power up the clock generators and enable clock output pins. */ + + ad1843_write_multi(lith, 2, &ad1843_C1EN, 1, &ad1843_C2EN, 1); + + /* 6. Configure conversion resources while they are in standby. */ + + /* DAC1 uses clock 1 as source, ADC uses clock 2. Always. */ + + ad1843_write_multi(lith, 3, + &ad1843_DA1C, 1, + &ad1843_ADLC, 2, + &ad1843_ADRC, 2); + + /* 7. Enable conversion resources. */ + + ad1843_write_bits(lith, &ad1843_ADTLK, 1); + ad1843_write_multi(lith, 5, + &ad1843_ANAEN, 1, + &ad1843_AAMEN, 1, + &ad1843_DA1EN, 1, + &ad1843_ADLEN, 1, + &ad1843_ADREN, 1); + + /* 8. Configure conversion resources while they are enabled. */ + + ad1843_write_bits(lith, &ad1843_DA1C, 1); + + /* Unmute all channels. */ + + ad1843_set_outsrc(lith, + (SOUND_MASK_PCM | SOUND_MASK_LINE | + SOUND_MASK_MIC | SOUND_MASK_CD)); + ad1843_write_multi(lith, 2, &ad1843_LDA1AM, 0, &ad1843_RDA1AM, 0); + + /* Set default recording source to Line In and set + * mic gain to +20 dB. + */ + + ad1843_set_recsrc(lith, SOUND_MASK_LINE); + ad1843_write_multi(lith, 2, &ad1843_LMGE, 1, &ad1843_RMGE, 1); + + /* Set Speaker Out level to +/- 4V and unmute it. */ + + ad1843_write_multi(lith, 2, &ad1843_HPOS, 1, &ad1843_HPOM, 0); + + return 0; +} + +/*****************************************************************************/ +/* PCM I/O */ + +#define READ_INTR_MASK (LI_INTR_COMM1_TRIG | LI_INTR_COMM1_OVERFLOW) +#define WRITE_INTR_MASK (LI_INTR_COMM2_TRIG | LI_INTR_COMM2_UNDERFLOW) + +typedef enum vwsnd_port_swstate { /* software state */ + SW_OFF, + SW_INITIAL, + SW_RUN, + SW_DRAIN, +} vwsnd_port_swstate_t; + +typedef enum vwsnd_port_hwstate { /* hardware state */ + HW_STOPPED, + HW_RUNNING, +} vwsnd_port_hwstate_t; + +/* + * These flags are read by ISR, but only written at baseline. + */ + +typedef enum vwsnd_port_flags { + DISABLED = 1 << 0, + ERFLOWN = 1 << 1, /* overflown or underflown */ + HW_BUSY = 1 << 2, +} vwsnd_port_flags_t; + +/* + * vwsnd_port is the per-port data structure. Each device has two + * ports, one for input and one for output. + * + * Locking: + * + * port->lock protects: hwstate, flags, swb_[iu]_avail. + * + * devc->io_sema protects: swstate, sw_*, swb_[iu]_idx. + * + * everything else is only written by open/release or + * pcm_{setup,shutdown}(), which are serialized by a + * combination of devc->open_sema and devc->io_sema. + */ + +typedef struct vwsnd_port { + + spinlock_t lock; + wait_queue_head_t queue; + vwsnd_port_swstate_t swstate; + vwsnd_port_hwstate_t hwstate; + vwsnd_port_flags_t flags; + + int sw_channels; + int sw_samplefmt; + int sw_framerate; + int sample_size; + int frame_size; + unsigned int zero_word; /* zero for the sample format */ + + int sw_fragshift; + int sw_fragcount; + int sw_subdivshift; + + unsigned int hw_fragshift; + unsigned int hw_fragsize; + unsigned int hw_fragcount; + + int hwbuf_size; + unsigned long hwbuf_paddr; + unsigned long hwbuf_vaddr; + void * hwbuf; /* hwbuf == hwbuf_vaddr */ + int hwbuf_max; /* max bytes to preload */ + + void * swbuf; + unsigned int swbuf_size; /* size in bytes */ + unsigned int swb_u_idx; /* index of next user byte */ + unsigned int swb_i_idx; /* index of next intr byte */ + unsigned int swb_u_avail; /* # bytes avail to user */ + unsigned int swb_i_avail; /* # bytes avail to intr */ + + dma_chan_t chan; + + /* Accounting */ + + int byte_count; + int frag_count; + int MSC_offset; + +} vwsnd_port_t; + +/* vwsnd_dev is the per-device data structure. */ + +typedef struct vwsnd_dev { + struct vwsnd_dev *next_dev; + int audio_minor; /* minor number of audio device */ + int mixer_minor; /* minor number of mixer device */ + + struct semaphore open_sema; + struct semaphore io_sema; + struct semaphore mix_sema; + mode_t open_mode; + wait_queue_head_t open_wait; + + lithium_t lith; + + vwsnd_port_t rport; + vwsnd_port_t wport; +} vwsnd_dev_t; + +static vwsnd_dev_t *vwsnd_dev_list; /* linked list of all devices */ + +static atomic_t vwsnd_use_count = ATOMIC_INIT(0); + +# define INC_USE_COUNT (atomic_inc(&vwsnd_use_count)) +# define DEC_USE_COUNT (atomic_dec(&vwsnd_use_count)) +# define IN_USE (atomic_read(&vwsnd_use_count) != 0) + +/* + * Lithium can only DMA multiples of 32 bytes. Its DMA buffer may + * be up to 8 Kb. This driver always uses 8 Kb. + * + * Memory bug workaround -- I'm not sure what's going on here, but + * somehow pcm_copy_out() was triggering segv's going on to the next + * page of the hw buffer. So, I make the hw buffer one size bigger + * than we actually use. That way, the following page is allocated + * and mapped, and no error. I suspect that something is broken + * in Cobalt, but haven't really investigated. HBO is the actual + * size of the buffer, and HWBUF_ORDER is what we allocate. + */ + +#define HWBUF_SHIFT 13 +#define HWBUF_SIZE (1 << HWBUF_SHIFT) +# define HBO (HWBUF_SHIFT > PAGE_SHIFT ? HWBUF_SHIFT - PAGE_SHIFT : 0) +# define HWBUF_ORDER (HBO + 1) /* next size bigger */ +#define MIN_SPEED 4000 +#define MAX_SPEED 49000 + +#define MIN_FRAGSHIFT (DMACHUNK_SHIFT + 1) +#define MAX_FRAGSHIFT (PAGE_SHIFT) +#define MIN_FRAGSIZE (1 << MIN_FRAGSHIFT) +#define MAX_FRAGSIZE (1 << MAX_FRAGSHIFT) +#define MIN_FRAGCOUNT(fragsize) 3 +#define MAX_FRAGCOUNT(fragsize) (32 * PAGE_SIZE / (fragsize)) +#define DEFAULT_FRAGSHIFT 12 +#define DEFAULT_FRAGCOUNT 16 +#define DEFAULT_SUBDIVSHIFT 0 + +/* + * The software buffer (swbuf) is a ring buffer shared between user + * level and interrupt level. Each level owns some of the bytes in + * the buffer, and may give bytes away by calling swb_inc_{u,i}(). + * User level calls _u for user, and interrupt level calls _i for + * interrupt. + * + * port->swb_{u,i}_avail is the number of bytes available to that level. + * + * port->swb_{u,i}_idx is the index of the first available byte in the + * buffer. + * + * Each level calls swb_inc_{u,i}() to atomically increment its index, + * recalculate the number of bytes available for both sides, and + * return the number of bytes available. Since each side can only + * give away bytes, the other side can only increase the number of + * bytes available to this side. Each side updates its own index + * variable, swb_{u,i}_idx, so no lock is needed to read it. + * + * To query the number of bytes available, call swb_inc_{u,i} with an + * increment of zero. + */ + +static __inline__ unsigned int __swb_inc_u(vwsnd_port_t *port, int inc) +{ + if (inc) { + port->swb_u_idx += inc; + port->swb_u_idx %= port->swbuf_size; + port->swb_u_avail -= inc; + port->swb_i_avail += inc; + } + return port->swb_u_avail; +} + +static __inline__ unsigned int swb_inc_u(vwsnd_port_t *port, int inc) +{ + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&port->lock, flags); + { + ret = __swb_inc_u(port, inc); + } + spin_unlock_irqrestore(&port->lock, flags); + return ret; +} + +static __inline__ unsigned int __swb_inc_i(vwsnd_port_t *port, int inc) +{ + if (inc) { + port->swb_i_idx += inc; + port->swb_i_idx %= port->swbuf_size; + port->swb_i_avail -= inc; + port->swb_u_avail += inc; + } + return port->swb_i_avail; +} + +static __inline__ unsigned int swb_inc_i(vwsnd_port_t *port, int inc) +{ + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&port->lock, flags); + { + ret = __swb_inc_i(port, inc); + } + spin_unlock_irqrestore(&port->lock, flags); + return ret; +} + +/* + * pcm_setup - this routine initializes all port state after + * mode-setting ioctls have been done, but before the first I/O is + * done. + * + * Locking: called with devc->io_sema held. + * + * Returns 0 on success, -errno on failure. + */ + +static int pcm_setup(vwsnd_dev_t *devc, + vwsnd_port_t *rport, + vwsnd_port_t *wport) +{ + vwsnd_port_t *aport = rport ? rport : wport; + int sample_size; + unsigned int zero_word; + + DBGEV("(devc=0x%p, rport=0x%p, wport=0x%p)\n", devc, rport, wport); + + ASSERT(aport != NULL); + if (aport->swbuf != NULL) + return 0; + switch (aport->sw_samplefmt) { + case AFMT_MU_LAW: + sample_size = 1; + zero_word = 0xFFFFFFFF ^ 0x80808080; + break; + + case AFMT_A_LAW: + sample_size = 1; + zero_word = 0xD5D5D5D5 ^ 0x80808080; + break; + + case AFMT_U8: + sample_size = 1; + zero_word = 0x80808080; + break; + + case AFMT_S8: + sample_size = 1; + zero_word = 0x00000000; + break; + + case AFMT_S16_LE: + sample_size = 2; + zero_word = 0x00000000; + break; + + default: + sample_size = 0; /* prevent compiler warning */ + zero_word = 0; + ASSERT(0); + } + aport->sample_size = sample_size; + aport->zero_word = zero_word; + aport->frame_size = aport->sw_channels * aport->sample_size; + aport->hw_fragshift = aport->sw_fragshift - aport->sw_subdivshift; + aport->hw_fragsize = 1 << aport->hw_fragshift; + aport->hw_fragcount = aport->sw_fragcount << aport->sw_subdivshift; + ASSERT(aport->hw_fragsize >= MIN_FRAGSIZE); + ASSERT(aport->hw_fragsize <= MAX_FRAGSIZE); + ASSERT(aport->hw_fragcount >= MIN_FRAGCOUNT(aport->hw_fragsize)); + ASSERT(aport->hw_fragcount <= MAX_FRAGCOUNT(aport->hw_fragsize)); + if (rport) { + int hwfrags, swfrags; + rport->hwbuf_max = aport->hwbuf_size - DMACHUNK_SIZE; + hwfrags = rport->hwbuf_max >> aport->hw_fragshift; + swfrags = aport->hw_fragcount - hwfrags; + if (swfrags < 2) + swfrags = 2; + rport->swbuf_size = swfrags * aport->hw_fragsize; + DBGPV("hwfrags = %d, swfrags = %d\n", hwfrags, swfrags); + DBGPV("read hwbuf_max = %d, swbuf_size = %d\n", + rport->hwbuf_max, rport->swbuf_size); + } + if (wport) { + int hwfrags, swfrags; + int total_bytes = aport->hw_fragcount * aport->hw_fragsize; + wport->hwbuf_max = aport->hwbuf_size - DMACHUNK_SIZE; + if (wport->hwbuf_max > total_bytes) + wport->hwbuf_max = total_bytes; + hwfrags = wport->hwbuf_max >> aport->hw_fragshift; + DBGPV("hwfrags = %d\n", hwfrags); + swfrags = aport->hw_fragcount - hwfrags; + if (swfrags < 2) + swfrags = 2; + wport->swbuf_size = swfrags * aport->hw_fragsize; + DBGPV("hwfrags = %d, swfrags = %d\n", hwfrags, swfrags); + DBGPV("write hwbuf_max = %d, swbuf_size = %d\n", + wport->hwbuf_max, wport->swbuf_size); + } + + aport->swb_u_idx = 0; + aport->swb_i_idx = 0; + aport->byte_count = 0; + + /* + * Is this a Cobalt bug? We need to make this buffer extend + * one page further than we actually use -- somehow memcpy + * causes an exceptoin otherwise. I suspect there's a bug in + * Cobalt (or somewhere) where it's generating a fault on a + * speculative load or something. Obviously, I haven't taken + * the time to track it down. + */ + + aport->swbuf = vmalloc(aport->swbuf_size + PAGE_SIZE); + if (!aport->swbuf) + return -ENOMEM; + if (rport && wport) { + ASSERT(aport == rport); + ASSERT(wport->swbuf == NULL); + /* One extra page - see comment above. */ + wport->swbuf = vmalloc(aport->swbuf_size + PAGE_SIZE); + if (!wport->swbuf) { + vfree(aport->swbuf); + aport->swbuf = NULL; + return -ENOMEM; + } + wport->sample_size = rport->sample_size; + wport->zero_word = rport->zero_word; + wport->frame_size = rport->frame_size; + wport->hw_fragshift = rport->hw_fragshift; + wport->hw_fragsize = rport->hw_fragsize; + wport->hw_fragcount = rport->hw_fragcount; + wport->swbuf_size = rport->swbuf_size; + wport->hwbuf_max = rport->hwbuf_max; + wport->swb_u_idx = rport->swb_u_idx; + wport->swb_i_idx = rport->swb_i_idx; + wport->byte_count = rport->byte_count; + } + if (rport) { + rport->swb_u_avail = 0; + rport->swb_i_avail = rport->swbuf_size; + rport->swstate = SW_RUN; + li_setup_dma(&rport->chan, + &li_comm1, + &devc->lith, + rport->hwbuf_paddr, + HWBUF_SHIFT, + rport->hw_fragshift, + rport->sw_channels, + rport->sample_size); + ad1843_setup_adc(&devc->lith, + rport->sw_framerate, + rport->sw_samplefmt, + rport->sw_channels); + li_enable_interrupts(&devc->lith, READ_INTR_MASK); + if (!(rport->flags & DISABLED)) { + ustmsc_t ustmsc; + rport->hwstate = HW_RUNNING; + li_activate_dma(&rport->chan); + li_read_USTMSC(&rport->chan, &ustmsc); + rport->MSC_offset = ustmsc.msc; + } + } + if (wport) { + if (wport->hwbuf_max > wport->swbuf_size) + wport->hwbuf_max = wport->swbuf_size; + wport->flags &= ~ERFLOWN; + wport->swb_u_avail = wport->swbuf_size; + wport->swb_i_avail = 0; + wport->swstate = SW_RUN; + li_setup_dma(&wport->chan, + &li_comm2, + &devc->lith, + wport->hwbuf_paddr, + HWBUF_SHIFT, + wport->hw_fragshift, + wport->sw_channels, + wport->sample_size); + ad1843_setup_dac(&devc->lith, + wport->sw_framerate, + wport->sw_samplefmt, + wport->sw_channels); + li_enable_interrupts(&devc->lith, WRITE_INTR_MASK); + } + DBGRV(); + return 0; +} + +/* + * pcm_shutdown_port - shut down one port (direction) for PCM I/O. + * Only called from pcm_shutdown. + */ + +static void pcm_shutdown_port(vwsnd_dev_t *devc, + vwsnd_port_t *aport, + unsigned int mask) +{ + unsigned long flags; + vwsnd_port_hwstate_t hwstate; + DECLARE_WAITQUEUE(wait, current); + + aport->swstate = SW_INITIAL; + add_wait_queue(&aport->queue, &wait); + while (1) { + set_current_state(TASK_UNINTERRUPTIBLE); + spin_lock_irqsave(&aport->lock, flags); + { + hwstate = aport->hwstate; + } + spin_unlock_irqrestore(&aport->lock, flags); + if (hwstate == HW_STOPPED) + break; + schedule(); + } + current->state = TASK_RUNNING; + remove_wait_queue(&aport->queue, &wait); + li_disable_interrupts(&devc->lith, mask); + if (aport == &devc->rport) + ad1843_shutdown_adc(&devc->lith); + else /* aport == &devc->wport) */ + ad1843_shutdown_dac(&devc->lith); + li_shutdown_dma(&aport->chan); + vfree(aport->swbuf); + aport->swbuf = NULL; + aport->byte_count = 0; +} + +/* + * pcm_shutdown undoes what pcm_setup did. + * Also sets the ports' swstate to newstate. + */ + +static void pcm_shutdown(vwsnd_dev_t *devc, + vwsnd_port_t *rport, + vwsnd_port_t *wport) +{ + DBGEV("(devc=0x%p, rport=0x%p, wport=0x%p)\n", devc, rport, wport); + + if (rport && rport->swbuf) { + DBGPV("shutting down rport\n"); + pcm_shutdown_port(devc, rport, READ_INTR_MASK); + } + if (wport && wport->swbuf) { + DBGPV("shutting down wport\n"); + pcm_shutdown_port(devc, wport, WRITE_INTR_MASK); + } + DBGRV(); +} + +static void pcm_copy_in(vwsnd_port_t *rport, int swidx, int hwidx, int nb) +{ + char *src = rport->hwbuf + hwidx; + char *dst = rport->swbuf + swidx; + int fmt = rport->sw_samplefmt; + + DBGPV("swidx = %d, hwidx = %d\n", swidx, hwidx); + ASSERT(rport->hwbuf != NULL); + ASSERT(rport->swbuf != NULL); + ASSERT(nb > 0 && (nb % 32) == 0); + ASSERT(swidx % 32 == 0 && hwidx % 32 == 0); + ASSERT(swidx >= 0 && swidx + nb <= rport->swbuf_size); + ASSERT(hwidx >= 0 && hwidx + nb <= rport->hwbuf_size); + + if (fmt == AFMT_MU_LAW || fmt == AFMT_A_LAW || fmt == AFMT_S8) { + + /* See Sample Format Notes above. */ + + char *end = src + nb; + while (src < end) + *dst++ = *src++ ^ 0x80; + } else + memcpy(dst, src, nb); +} + +static void pcm_copy_out(vwsnd_port_t *wport, int swidx, int hwidx, int nb) +{ + char *src = wport->swbuf + swidx; + char *dst = wport->hwbuf + hwidx; + int fmt = wport->sw_samplefmt; + + ASSERT(nb > 0 && (nb % 32) == 0); + ASSERT(wport->hwbuf != NULL); + ASSERT(wport->swbuf != NULL); + ASSERT(swidx % 32 == 0 && hwidx % 32 == 0); + ASSERT(swidx >= 0 && swidx + nb <= wport->swbuf_size); + ASSERT(hwidx >= 0 && hwidx + nb <= wport->hwbuf_size); + if (fmt == AFMT_MU_LAW || fmt == AFMT_A_LAW || fmt == AFMT_S8) { + + /* See Sample Format Notes above. */ + + char *end = src + nb; + while (src < end) + *dst++ = *src++ ^ 0x80; + } else + memcpy(dst, src, nb); +} + +/* + * pcm_output() is called both from baselevel and from interrupt level. + * This is where audio frames are copied into the hardware-accessible + * ring buffer. + * + * Locking note: The part of this routine that figures out what to do + * holds wport->lock. The longer part releases wport->lock, but sets + * wport->flags & HW_BUSY. Afterward, it reacquires wport->lock, and + * checks for more work to do. + * + * If another thread calls pcm_output() while HW_BUSY is set, it + * returns immediately, knowing that the thread that set HW_BUSY will + * look for more work to do before returning. + * + * This has the advantage that port->lock is held for several short + * periods instead of one long period. Also, when pcm_output is + * called from base level, it reenables interrupts. + */ + +static void pcm_output(vwsnd_dev_t *devc, int erflown, int nb) +{ + vwsnd_port_t *wport = &devc->wport; + const int hwmax = wport->hwbuf_max; + const int hwsize = wport->hwbuf_size; + const int swsize = wport->swbuf_size; + const int fragsize = wport->hw_fragsize; + unsigned long iflags; + + DBGEV("(devc=0x%p, erflown=%d, nb=%d)\n", devc, erflown, nb); + spin_lock_irqsave(&wport->lock, iflags); + if (erflown) + wport->flags |= ERFLOWN; + (void) __swb_inc_u(wport, nb); + if (wport->flags & HW_BUSY) { + spin_unlock_irqrestore(&wport->lock, iflags); + DBGPV("returning: HW BUSY\n"); + return; + } + if (wport->flags & DISABLED) { + spin_unlock_irqrestore(&wport->lock, iflags); + DBGPV("returning: DISABLED\n"); + return; + } + wport->flags |= HW_BUSY; + while (1) { + int swptr, hwptr, hw_avail, sw_avail, swidx; + vwsnd_port_hwstate_t hwstate = wport->hwstate; + vwsnd_port_swstate_t swstate = wport->swstate; + int hw_unavail; + ustmsc_t ustmsc; + + hwptr = li_read_hwptr(&wport->chan); + swptr = li_read_swptr(&wport->chan); + hw_unavail = (swptr - hwptr + hwsize) % hwsize; + hw_avail = (hwmax - hw_unavail) & -fragsize; + sw_avail = wport->swb_i_avail & -fragsize; + if (sw_avail && swstate == SW_RUN) { + if (wport->flags & ERFLOWN) { + wport->flags &= ~ERFLOWN; + } + } else if (swstate == SW_INITIAL || + swstate == SW_OFF || + (swstate == SW_DRAIN && + !sw_avail && + (wport->flags & ERFLOWN))) { + DBGP("stopping. hwstate = %d\n", hwstate); + if (hwstate != HW_STOPPED) { + li_deactivate_dma(&wport->chan); + wport->hwstate = HW_STOPPED; + } + wake_up(&wport->queue); + break; + } + if (!sw_avail || !hw_avail) + break; + spin_unlock_irqrestore(&wport->lock, iflags); + + /* + * We gave up the port lock, but we have the HW_BUSY flag. + * Proceed without accessing any nonlocal state. + * Do not exit the loop -- must check for more work. + */ + + swidx = wport->swb_i_idx; + nb = hw_avail; + if (nb > sw_avail) + nb = sw_avail; + if (nb > hwsize - swptr) + nb = hwsize - swptr; /* don't overflow hwbuf */ + if (nb > swsize - swidx) + nb = swsize - swidx; /* don't overflow swbuf */ + ASSERT(nb > 0); + if (nb % fragsize) { + DBGP("nb = %d, fragsize = %d\n", nb, fragsize); + DBGP("hw_avail = %d\n", hw_avail); + DBGP("sw_avail = %d\n", sw_avail); + DBGP("hwsize = %d, swptr = %d\n", hwsize, swptr); + DBGP("swsize = %d, swidx = %d\n", swsize, swidx); + } + ASSERT(!(nb % fragsize)); + DBGPV("copying swb[%d..%d] to hwb[%d..%d]\n", + swidx, swidx + nb, swptr, swptr + nb); + pcm_copy_out(wport, swidx, swptr, nb); + li_write_swptr(&wport->chan, (swptr + nb) % hwsize); + spin_lock_irqsave(&wport->lock, iflags); + if (hwstate == HW_STOPPED) { + DBGPV("starting\n"); + li_activate_dma(&wport->chan); + wport->hwstate = HW_RUNNING; + li_read_USTMSC(&wport->chan, &ustmsc); + ASSERT(wport->byte_count % wport->frame_size == 0); + wport->MSC_offset = ustmsc.msc - wport->byte_count / wport->frame_size; + } + __swb_inc_i(wport, nb); + wport->byte_count += nb; + wport->frag_count += nb / fragsize; + ASSERT(nb % fragsize == 0); + wake_up(&wport->queue); + } + wport->flags &= ~HW_BUSY; + spin_unlock_irqrestore(&wport->lock, iflags); + DBGRV(); +} + +/* + * pcm_input() is called both from baselevel and from interrupt level. + * This is where audio frames are copied out of the hardware-accessible + * ring buffer. + * + * Locking note: The part of this routine that figures out what to do + * holds rport->lock. The longer part releases rport->lock, but sets + * rport->flags & HW_BUSY. Afterward, it reacquires rport->lock, and + * checks for more work to do. + * + * If another thread calls pcm_input() while HW_BUSY is set, it + * returns immediately, knowing that the thread that set HW_BUSY will + * look for more work to do before returning. + * + * This has the advantage that port->lock is held for several short + * periods instead of one long period. Also, when pcm_input is + * called from base level, it reenables interrupts. + */ + +static void pcm_input(vwsnd_dev_t *devc, int erflown, int nb) +{ + vwsnd_port_t *rport = &devc->rport; + const int hwmax = rport->hwbuf_max; + const int hwsize = rport->hwbuf_size; + const int swsize = rport->swbuf_size; + const int fragsize = rport->hw_fragsize; + unsigned long iflags; + + DBGEV("(devc=0x%p, erflown=%d, nb=%d)\n", devc, erflown, nb); + + spin_lock_irqsave(&rport->lock, iflags); + if (erflown) + rport->flags |= ERFLOWN; + (void) __swb_inc_u(rport, nb); + if (rport->flags & HW_BUSY || !rport->swbuf) { + spin_unlock_irqrestore(&rport->lock, iflags); + DBGPV("returning: HW BUSY or !swbuf\n"); + return; + } + if (rport->flags & DISABLED) { + spin_unlock_irqrestore(&rport->lock, iflags); + DBGPV("returning: DISABLED\n"); + return; + } + rport->flags |= HW_BUSY; + while (1) { + int swptr, hwptr, hw_avail, sw_avail, swidx; + vwsnd_port_hwstate_t hwstate = rport->hwstate; + vwsnd_port_swstate_t swstate = rport->swstate; + + hwptr = li_read_hwptr(&rport->chan); + swptr = li_read_swptr(&rport->chan); + hw_avail = (hwptr - swptr + hwsize) % hwsize & -fragsize; + if (hw_avail > hwmax) + hw_avail = hwmax; + sw_avail = rport->swb_i_avail & -fragsize; + if (swstate != SW_RUN) { + DBGP("stopping. hwstate = %d\n", hwstate); + if (hwstate != HW_STOPPED) { + li_deactivate_dma(&rport->chan); + rport->hwstate = HW_STOPPED; + } + wake_up(&rport->queue); + break; + } + if (!sw_avail || !hw_avail) + break; + spin_unlock_irqrestore(&rport->lock, iflags); + + /* + * We gave up the port lock, but we have the HW_BUSY flag. + * Proceed without accessing any nonlocal state. + * Do not exit the loop -- must check for more work. + */ + + swidx = rport->swb_i_idx; + nb = hw_avail; + if (nb > sw_avail) + nb = sw_avail; + if (nb > hwsize - swptr) + nb = hwsize - swptr; /* don't overflow hwbuf */ + if (nb > swsize - swidx) + nb = swsize - swidx; /* don't overflow swbuf */ + ASSERT(nb > 0); + if (nb % fragsize) { + DBGP("nb = %d, fragsize = %d\n", nb, fragsize); + DBGP("hw_avail = %d\n", hw_avail); + DBGP("sw_avail = %d\n", sw_avail); + DBGP("hwsize = %d, swptr = %d\n", hwsize, swptr); + DBGP("swsize = %d, swidx = %d\n", swsize, swidx); + } + ASSERT(!(nb % fragsize)); + DBGPV("copying hwb[%d..%d] to swb[%d..%d]\n", + swptr, swptr + nb, swidx, swidx + nb); + pcm_copy_in(rport, swidx, swptr, nb); + li_write_swptr(&rport->chan, (swptr + nb) % hwsize); + spin_lock_irqsave(&rport->lock, iflags); + __swb_inc_i(rport, nb); + rport->byte_count += nb; + rport->frag_count += nb / fragsize; + ASSERT(nb % fragsize == 0); + wake_up(&rport->queue); + } + rport->flags &= ~HW_BUSY; + spin_unlock_irqrestore(&rport->lock, iflags); + DBGRV(); +} + +/* + * pcm_flush_frag() writes zero samples to fill the current fragment, + * then flushes it to the hardware. + * + * It is only meaningful to flush output, not input. + */ + +static void pcm_flush_frag(vwsnd_dev_t *devc) +{ + vwsnd_port_t *wport = &devc->wport; + + DBGPV("swstate = %d\n", wport->swstate); + if (wport->swstate == SW_RUN) { + int idx = wport->swb_u_idx; + int end = (idx + wport->hw_fragsize - 1) + >> wport->hw_fragshift + << wport->hw_fragshift; + int nb = end - idx; + DBGPV("clearing %d bytes\n", nb); + if (nb) + memset(wport->swbuf + idx, + (char) wport->zero_word, + nb); + wport->swstate = SW_DRAIN; + pcm_output(devc, 0, nb); + } + DBGRV(); +} + +/* + * Wait for output to drain. This sleeps uninterruptibly because + * there is nothing intelligent we can do if interrupted. This + * means the process will be delayed in responding to the signal. + */ + +static void pcm_write_sync(vwsnd_dev_t *devc) +{ + vwsnd_port_t *wport = &devc->wport; + DECLARE_WAITQUEUE(wait, current); + unsigned long flags; + vwsnd_port_hwstate_t hwstate; + + DBGEV("(devc=0x%p)\n", devc); + add_wait_queue(&wport->queue, &wait); + while (1) { + set_current_state(TASK_UNINTERRUPTIBLE); + spin_lock_irqsave(&wport->lock, flags); + { + hwstate = wport->hwstate; + } + spin_unlock_irqrestore(&wport->lock, flags); + if (hwstate == HW_STOPPED) + break; + schedule(); + } + current->state = TASK_RUNNING; + remove_wait_queue(&wport->queue, &wait); + DBGPV("swstate = %d, hwstate = %d\n", wport->swstate, wport->hwstate); + DBGRV(); +} + +/*****************************************************************************/ +/* audio driver */ + +/* + * seek on an audio device always fails. + */ + +static void vwsnd_audio_read_intr(vwsnd_dev_t *devc, unsigned int status) +{ + int overflown = status & LI_INTR_COMM1_OVERFLOW; + + if (status & READ_INTR_MASK) + pcm_input(devc, overflown, 0); +} + +static void vwsnd_audio_write_intr(vwsnd_dev_t *devc, unsigned int status) +{ + int underflown = status & LI_INTR_COMM2_UNDERFLOW; + + if (status & WRITE_INTR_MASK) + pcm_output(devc, underflown, 0); +} + +static irqreturn_t vwsnd_audio_intr(int irq, void *dev_id, struct pt_regs *regs) +{ + vwsnd_dev_t *devc = (vwsnd_dev_t *) dev_id; + unsigned int status; + + DBGEV("(irq=%d, dev_id=0x%p, regs=0x%p)\n", irq, dev_id, regs); + + status = li_get_clear_intr_status(&devc->lith); + vwsnd_audio_read_intr(devc, status); + vwsnd_audio_write_intr(devc, status); + return IRQ_HANDLED; +} + +static ssize_t vwsnd_audio_do_read(struct file *file, + char *buffer, + size_t count, + loff_t *ppos) +{ + vwsnd_dev_t *devc = file->private_data; + vwsnd_port_t *rport = ((file->f_mode & FMODE_READ) ? + &devc->rport : NULL); + int ret, nb; + + DBGEV("(file=0x%p, buffer=0x%p, count=%d, ppos=0x%p)\n", + file, buffer, count, ppos); + + if (!rport) + return -EINVAL; + + if (rport->swbuf == NULL) { + vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ? + &devc->wport : NULL; + ret = pcm_setup(devc, rport, wport); + if (ret < 0) + return ret; + } + + if (!access_ok(VERIFY_READ, buffer, count)) + return -EFAULT; + ret = 0; + while (count) { + DECLARE_WAITQUEUE(wait, current); + add_wait_queue(&rport->queue, &wait); + while ((nb = swb_inc_u(rport, 0)) == 0) { + DBGPV("blocking\n"); + set_current_state(TASK_INTERRUPTIBLE); + if (rport->flags & DISABLED || + file->f_flags & O_NONBLOCK) { + current->state = TASK_RUNNING; + remove_wait_queue(&rport->queue, &wait); + return ret ? ret : -EAGAIN; + } + schedule(); + if (signal_pending(current)) { + current->state = TASK_RUNNING; + remove_wait_queue(&rport->queue, &wait); + return ret ? ret : -ERESTARTSYS; + } + } + current->state = TASK_RUNNING; + remove_wait_queue(&rport->queue, &wait); + pcm_input(devc, 0, 0); + /* nb bytes are available in userbuf. */ + if (nb > count) + nb = count; + DBGPV("nb = %d\n", nb); + if (copy_to_user(buffer, rport->swbuf + rport->swb_u_idx, nb)) + return -EFAULT; + (void) swb_inc_u(rport, nb); + buffer += nb; + count -= nb; + ret += nb; + } + DBGPV("returning %d\n", ret); + return ret; +} + +static ssize_t vwsnd_audio_read(struct file *file, + char *buffer, + size_t count, + loff_t *ppos) +{ + vwsnd_dev_t *devc = file->private_data; + ssize_t ret; + + down(&devc->io_sema); + ret = vwsnd_audio_do_read(file, buffer, count, ppos); + up(&devc->io_sema); + return ret; +} + +static ssize_t vwsnd_audio_do_write(struct file *file, + const char *buffer, + size_t count, + loff_t *ppos) +{ + vwsnd_dev_t *devc = file->private_data; + vwsnd_port_t *wport = ((file->f_mode & FMODE_WRITE) ? + &devc->wport : NULL); + int ret, nb; + + DBGEV("(file=0x%p, buffer=0x%p, count=%d, ppos=0x%p)\n", + file, buffer, count, ppos); + + if (!wport) + return -EINVAL; + + if (wport->swbuf == NULL) { + vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ? + &devc->rport : NULL; + ret = pcm_setup(devc, rport, wport); + if (ret < 0) + return ret; + } + if (!access_ok(VERIFY_WRITE, buffer, count)) + return -EFAULT; + ret = 0; + while (count) { + DECLARE_WAITQUEUE(wait, current); + add_wait_queue(&wport->queue, &wait); + while ((nb = swb_inc_u(wport, 0)) == 0) { + set_current_state(TASK_INTERRUPTIBLE); + if (wport->flags & DISABLED || + file->f_flags & O_NONBLOCK) { + current->state = TASK_RUNNING; + remove_wait_queue(&wport->queue, &wait); + return ret ? ret : -EAGAIN; + } + schedule(); + if (signal_pending(current)) { + current->state = TASK_RUNNING; + remove_wait_queue(&wport->queue, &wait); + return ret ? ret : -ERESTARTSYS; + } + } + current->state = TASK_RUNNING; + remove_wait_queue(&wport->queue, &wait); + /* nb bytes are available in userbuf. */ + if (nb > count) + nb = count; + DBGPV("nb = %d\n", nb); + if (copy_from_user(wport->swbuf + wport->swb_u_idx, buffer, nb)) + return -EFAULT; + pcm_output(devc, 0, nb); + buffer += nb; + count -= nb; + ret += nb; + } + DBGPV("returning %d\n", ret); + return ret; +} + +static ssize_t vwsnd_audio_write(struct file *file, + const char *buffer, + size_t count, + loff_t *ppos) +{ + vwsnd_dev_t *devc = file->private_data; + ssize_t ret; + + down(&devc->io_sema); + ret = vwsnd_audio_do_write(file, buffer, count, ppos); + up(&devc->io_sema); + return ret; +} + +/* No kernel lock - fine */ +static unsigned int vwsnd_audio_poll(struct file *file, + struct poll_table_struct *wait) +{ + vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data; + vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ? + &devc->rport : NULL; + vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ? + &devc->wport : NULL; + unsigned int mask = 0; + + DBGEV("(file=0x%p, wait=0x%p)\n", file, wait); + + ASSERT(rport || wport); + if (rport) { + poll_wait(file, &rport->queue, wait); + if (swb_inc_u(rport, 0)) + mask |= (POLLIN | POLLRDNORM); + } + if (wport) { + poll_wait(file, &wport->queue, wait); + if (wport->swbuf == NULL || swb_inc_u(wport, 0)) + mask |= (POLLOUT | POLLWRNORM); + } + + DBGPV("returning 0x%x\n", mask); + return mask; +} + +static int vwsnd_audio_do_ioctl(struct inode *inode, + struct file *file, + unsigned int cmd, + unsigned long arg) +{ + vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data; + vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ? + &devc->rport : NULL; + vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ? + &devc->wport : NULL; + vwsnd_port_t *aport = rport ? rport : wport; + struct audio_buf_info buf_info; + struct count_info info; + unsigned long flags; + int ival; + + + DBGEV("(inode=0x%p, file=0x%p, cmd=0x%x, arg=0x%lx)\n", + inode, file, cmd, arg); + switch (cmd) { + case OSS_GETVERSION: /* _SIOR ('M', 118, int) */ + DBGX("OSS_GETVERSION\n"); + ival = SOUND_VERSION; + return put_user(ival, (int *) arg); + + case SNDCTL_DSP_GETCAPS: /* _SIOR ('P',15, int) */ + DBGX("SNDCTL_DSP_GETCAPS\n"); + ival = DSP_CAP_DUPLEX | DSP_CAP_REALTIME | DSP_CAP_TRIGGER; + return put_user(ival, (int *) arg); + + case SNDCTL_DSP_GETFMTS: /* _SIOR ('P',11, int) */ + DBGX("SNDCTL_DSP_GETFMTS\n"); + ival = (AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | + AFMT_U8 | AFMT_S8); + return put_user(ival, (int *) arg); + break; + + case SOUND_PCM_READ_RATE: /* _SIOR ('P', 2, int) */ + DBGX("SOUND_PCM_READ_RATE\n"); + ival = aport->sw_framerate; + return put_user(ival, (int *) arg); + + case SOUND_PCM_READ_CHANNELS: /* _SIOR ('P', 6, int) */ + DBGX("SOUND_PCM_READ_CHANNELS\n"); + ival = aport->sw_channels; + return put_user(ival, (int *) arg); + + case SNDCTL_DSP_SPEED: /* _SIOWR('P', 2, int) */ + if (get_user(ival, (int *) arg)) + return -EFAULT; + DBGX("SNDCTL_DSP_SPEED %d\n", ival); + if (ival) { + if (aport->swstate != SW_INITIAL) { + DBGX("SNDCTL_DSP_SPEED failed: swstate = %d\n", + aport->swstate); + return -EINVAL; + } + if (ival < MIN_SPEED) + ival = MIN_SPEED; + if (ival > MAX_SPEED) + ival = MAX_SPEED; + if (rport) + rport->sw_framerate = ival; + if (wport) + wport->sw_framerate = ival; + } else + ival = aport->sw_framerate; + return put_user(ival, (int *) arg); + + case SNDCTL_DSP_STEREO: /* _SIOWR('P', 3, int) */ + if (get_user(ival, (int *) arg)) + return -EFAULT; + DBGX("SNDCTL_DSP_STEREO %d\n", ival); + if (ival != 0 && ival != 1) + return -EINVAL; + if (aport->swstate != SW_INITIAL) + return -EINVAL; + if (rport) + rport->sw_channels = ival + 1; + if (wport) + wport->sw_channels = ival + 1; + return put_user(ival, (int *) arg); + + case SNDCTL_DSP_CHANNELS: /* _SIOWR('P', 6, int) */ + if (get_user(ival, (int *) arg)) + return -EFAULT; + DBGX("SNDCTL_DSP_CHANNELS %d\n", ival); + if (ival != 1 && ival != 2) + return -EINVAL; + if (aport->swstate != SW_INITIAL) + return -EINVAL; + if (rport) + rport->sw_channels = ival; + if (wport) + wport->sw_channels = ival; + return put_user(ival, (int *) arg); + + case SNDCTL_DSP_GETBLKSIZE: /* _SIOWR('P', 4, int) */ + ival = pcm_setup(devc, rport, wport); + if (ival < 0) { + DBGX("SNDCTL_DSP_GETBLKSIZE failed, errno %d\n", ival); + return ival; + } + ival = 1 << aport->sw_fragshift; + DBGX("SNDCTL_DSP_GETBLKSIZE returning %d\n", ival); + return put_user(ival, (int *) arg); + + case SNDCTL_DSP_SETFRAGMENT: /* _SIOWR('P',10, int) */ + if (get_user(ival, (int *) arg)) + return -EFAULT; + DBGX("SNDCTL_DSP_SETFRAGMENT %d:%d\n", + ival >> 16, ival & 0xFFFF); + if (aport->swstate != SW_INITIAL) + return -EINVAL; + { + int sw_fragshift = ival & 0xFFFF; + int sw_subdivshift = aport->sw_subdivshift; + int hw_fragshift = sw_fragshift - sw_subdivshift; + int sw_fragcount = (ival >> 16) & 0xFFFF; + int hw_fragsize; + if (hw_fragshift < MIN_FRAGSHIFT) + hw_fragshift = MIN_FRAGSHIFT; + if (hw_fragshift > MAX_FRAGSHIFT) + hw_fragshift = MAX_FRAGSHIFT; + sw_fragshift = hw_fragshift + aport->sw_subdivshift; + hw_fragsize = 1 << hw_fragshift; + if (sw_fragcount < MIN_FRAGCOUNT(hw_fragsize)) + sw_fragcount = MIN_FRAGCOUNT(hw_fragsize); + if (sw_fragcount > MAX_FRAGCOUNT(hw_fragsize)) + sw_fragcount = MAX_FRAGCOUNT(hw_fragsize); + DBGPV("sw_fragshift = %d\n", sw_fragshift); + DBGPV("rport = 0x%p, wport = 0x%p\n", rport, wport); + if (rport) { + rport->sw_fragshift = sw_fragshift; + rport->sw_fragcount = sw_fragcount; + } + if (wport) { + wport->sw_fragshift = sw_fragshift; + wport->sw_fragcount = sw_fragcount; + } + ival = sw_fragcount << 16 | sw_fragshift; + } + DBGX("SNDCTL_DSP_SETFRAGMENT returns %d:%d\n", + ival >> 16, ival & 0xFFFF); + return put_user(ival, (int *) arg); + + case SNDCTL_DSP_SUBDIVIDE: /* _SIOWR('P', 9, int) */ + if (get_user(ival, (int *) arg)) + return -EFAULT; + DBGX("SNDCTL_DSP_SUBDIVIDE %d\n", ival); + if (aport->swstate != SW_INITIAL) + return -EINVAL; + { + int subdivshift; + int hw_fragshift, hw_fragsize, hw_fragcount; + switch (ival) { + case 1: subdivshift = 0; break; + case 2: subdivshift = 1; break; + case 4: subdivshift = 2; break; + default: return -EINVAL; + } + hw_fragshift = aport->sw_fragshift - subdivshift; + if (hw_fragshift < MIN_FRAGSHIFT || + hw_fragshift > MAX_FRAGSHIFT) + return -EINVAL; + hw_fragsize = 1 << hw_fragshift; + hw_fragcount = aport->sw_fragcount >> subdivshift; + if (hw_fragcount < MIN_FRAGCOUNT(hw_fragsize) || + hw_fragcount > MAX_FRAGCOUNT(hw_fragsize)) + return -EINVAL; + if (rport) + rport->sw_subdivshift = subdivshift; + if (wport) + wport->sw_subdivshift = subdivshift; + } + return 0; + + case SNDCTL_DSP_SETFMT: /* _SIOWR('P',5, int) */ + if (get_user(ival, (int *) arg)) + return -EFAULT; + DBGX("SNDCTL_DSP_SETFMT %d\n", ival); + if (ival != AFMT_QUERY) { + if (aport->swstate != SW_INITIAL) { + DBGP("SETFMT failed, swstate = %d\n", + aport->swstate); + return -EINVAL; + } + switch (ival) { + case AFMT_MU_LAW: + case AFMT_A_LAW: + case AFMT_U8: + case AFMT_S8: + case AFMT_S16_LE: + if (rport) + rport->sw_samplefmt = ival; + if (wport) + wport->sw_samplefmt = ival; + break; + default: + return -EINVAL; + } + } + ival = aport->sw_samplefmt; + return put_user(ival, (int *) arg); + + case SNDCTL_DSP_GETOSPACE: /* _SIOR ('P',12, audio_buf_info) */ + DBGXV("SNDCTL_DSP_GETOSPACE\n"); + if (!wport) + return -EINVAL; + ival = pcm_setup(devc, rport, wport); + if (ival < 0) + return ival; + ival = swb_inc_u(wport, 0); + buf_info.fragments = ival >> wport->sw_fragshift; + buf_info.fragstotal = wport->sw_fragcount; + buf_info.fragsize = 1 << wport->sw_fragshift; + buf_info.bytes = ival; + DBGXV("SNDCTL_DSP_GETOSPACE returns { %d %d %d %d }\n", + buf_info.fragments, buf_info.fragstotal, + buf_info.fragsize, buf_info.bytes); + if (copy_to_user((void *) arg, &buf_info, sizeof buf_info)) + return -EFAULT; + return 0; + + case SNDCTL_DSP_GETISPACE: /* _SIOR ('P',13, audio_buf_info) */ + DBGX("SNDCTL_DSP_GETISPACE\n"); + if (!rport) + return -EINVAL; + ival = pcm_setup(devc, rport, wport); + if (ival < 0) + return ival; + ival = swb_inc_u(rport, 0); + buf_info.fragments = ival >> rport->sw_fragshift; + buf_info.fragstotal = rport->sw_fragcount; + buf_info.fragsize = 1 << rport->sw_fragshift; + buf_info.bytes = ival; + DBGX("SNDCTL_DSP_GETISPACE returns { %d %d %d %d }\n", + buf_info.fragments, buf_info.fragstotal, + buf_info.fragsize, buf_info.bytes); + if (copy_to_user((void *) arg, &buf_info, sizeof buf_info)) + return -EFAULT; + return 0; + + case SNDCTL_DSP_NONBLOCK: /* _SIO ('P',14) */ + DBGX("SNDCTL_DSP_NONBLOCK\n"); + file->f_flags |= O_NONBLOCK; + return 0; + + case SNDCTL_DSP_RESET: /* _SIO ('P', 0) */ + DBGX("SNDCTL_DSP_RESET\n"); + /* + * Nothing special needs to be done for input. Input + * samples sit in swbuf, but it will be reinitialized + * to empty when pcm_setup() is called. + */ + if (wport && wport->swbuf) { + wport->swstate = SW_INITIAL; + pcm_output(devc, 0, 0); + pcm_write_sync(devc); + } + pcm_shutdown(devc, rport, wport); + return 0; + + case SNDCTL_DSP_SYNC: /* _SIO ('P', 1) */ + DBGX("SNDCTL_DSP_SYNC\n"); + if (wport) { + pcm_flush_frag(devc); + pcm_write_sync(devc); + } + pcm_shutdown(devc, rport, wport); + return 0; + + case SNDCTL_DSP_POST: /* _SIO ('P', 8) */ + DBGX("SNDCTL_DSP_POST\n"); + if (!wport) + return -EINVAL; + pcm_flush_frag(devc); + return 0; + + case SNDCTL_DSP_GETIPTR: /* _SIOR ('P', 17, count_info) */ + DBGX("SNDCTL_DSP_GETIPTR\n"); + if (!rport) + return -EINVAL; + spin_lock_irqsave(&rport->lock, flags); + { + ustmsc_t ustmsc; + if (rport->hwstate == HW_RUNNING) { + ASSERT(rport->swstate == SW_RUN); + li_read_USTMSC(&rport->chan, &ustmsc); + info.bytes = ustmsc.msc - rport->MSC_offset; + info.bytes *= rport->frame_size; + } else { + info.bytes = rport->byte_count; + } + info.blocks = rport->frag_count; + info.ptr = 0; /* not implemented */ + rport->frag_count = 0; + } + spin_unlock_irqrestore(&rport->lock, flags); + if (copy_to_user((void *) arg, &info, sizeof info)) + return -EFAULT; + return 0; + + case SNDCTL_DSP_GETOPTR: /* _SIOR ('P',18, count_info) */ + DBGX("SNDCTL_DSP_GETOPTR\n"); + if (!wport) + return -EINVAL; + spin_lock_irqsave(&wport->lock, flags); + { + ustmsc_t ustmsc; + if (wport->hwstate == HW_RUNNING) { + ASSERT(wport->swstate == SW_RUN); + li_read_USTMSC(&wport->chan, &ustmsc); + info.bytes = ustmsc.msc - wport->MSC_offset; + info.bytes *= wport->frame_size; + } else { + info.bytes = wport->byte_count; + } + info.blocks = wport->frag_count; + info.ptr = 0; /* not implemented */ + wport->frag_count = 0; + } + spin_unlock_irqrestore(&wport->lock, flags); + if (copy_to_user((void *) arg, &info, sizeof info)) + return -EFAULT; + return 0; + + case SNDCTL_DSP_GETODELAY: /* _SIOR ('P', 23, int) */ + DBGX("SNDCTL_DSP_GETODELAY\n"); + if (!wport) + return -EINVAL; + spin_lock_irqsave(&wport->lock, flags); + { + int fsize = wport->frame_size; + ival = wport->swb_i_avail / fsize; + if (wport->hwstate == HW_RUNNING) { + int swptr, hwptr, hwframes, hwbytes, hwsize; + int totalhwbytes; + ustmsc_t ustmsc; + + hwsize = wport->hwbuf_size; + swptr = li_read_swptr(&wport->chan); + li_read_USTMSC(&wport->chan, &ustmsc); + hwframes = ustmsc.msc - wport->MSC_offset; + totalhwbytes = hwframes * fsize; + hwptr = totalhwbytes % hwsize; + hwbytes = (swptr - hwptr + hwsize) % hwsize; + ival += hwbytes / fsize; + } + } + spin_unlock_irqrestore(&wport->lock, flags); + return put_user(ival, (int *) arg); + + case SNDCTL_DSP_PROFILE: /* _SIOW ('P', 23, int) */ + DBGX("SNDCTL_DSP_PROFILE\n"); + + /* + * Thomas Sailer explains SNDCTL_DSP_PROFILE + * (private email, March 24, 1999): + * + * This gives the sound driver a hint on what it + * should do with partial fragments + * (i.e. fragments partially filled with write). + * This can direct the driver to zero them or + * leave them alone. But don't ask me what this + * is good for, my driver just zeroes the last + * fragment before the receiver stops, no idea + * what good for any other behaviour could + * be. Implementing it as NOP seems safe. + */ + + break; + + case SNDCTL_DSP_GETTRIGGER: /* _SIOR ('P',16, int) */ + DBGX("SNDCTL_DSP_GETTRIGGER\n"); + ival = 0; + if (rport) { + spin_lock_irqsave(&rport->lock, flags); + { + if (!(rport->flags & DISABLED)) + ival |= PCM_ENABLE_INPUT; + } + spin_unlock_irqrestore(&rport->lock, flags); + } + if (wport) { + spin_lock_irqsave(&wport->lock, flags); + { + if (!(wport->flags & DISABLED)) + ival |= PCM_ENABLE_OUTPUT; + } + spin_unlock_irqrestore(&wport->lock, flags); + } + return put_user(ival, (int *) arg); + + case SNDCTL_DSP_SETTRIGGER: /* _SIOW ('P',16, int) */ + if (get_user(ival, (int *) arg)) + return -EFAULT; + DBGX("SNDCTL_DSP_SETTRIGGER %d\n", ival); + + /* + * If user is disabling I/O and port is not in initial + * state, fail with EINVAL. + */ + + if (((rport && !(ival & PCM_ENABLE_INPUT)) || + (wport && !(ival & PCM_ENABLE_OUTPUT))) && + aport->swstate != SW_INITIAL) + return -EINVAL; + + if (rport) { + vwsnd_port_hwstate_t hwstate; + spin_lock_irqsave(&rport->lock, flags); + { + hwstate = rport->hwstate; + if (ival & PCM_ENABLE_INPUT) + rport->flags &= ~DISABLED; + else + rport->flags |= DISABLED; + } + spin_unlock_irqrestore(&rport->lock, flags); + if (hwstate != HW_RUNNING && ival & PCM_ENABLE_INPUT) { + + if (rport->swstate == SW_INITIAL) + pcm_setup(devc, rport, wport); + else + li_activate_dma(&rport->chan); + } + } + if (wport) { + vwsnd_port_flags_t pflags; + spin_lock_irqsave(&wport->lock, flags); + { + pflags = wport->flags; + if (ival & PCM_ENABLE_OUTPUT) + wport->flags &= ~DISABLED; + else + wport->flags |= DISABLED; + } + spin_unlock_irqrestore(&wport->lock, flags); + if (pflags & DISABLED && ival & PCM_ENABLE_OUTPUT) { + if (wport->swstate == SW_RUN) + pcm_output(devc, 0, 0); + } + } + return 0; + + default: + DBGP("unknown ioctl 0x%x\n", cmd); + return -EINVAL; + } + DBGP("unimplemented ioctl 0x%x\n", cmd); + return -EINVAL; +} + +static int vwsnd_audio_ioctl(struct inode *inode, + struct file *file, + unsigned int cmd, + unsigned long arg) +{ + vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data; + int ret; + + down(&devc->io_sema); + ret = vwsnd_audio_do_ioctl(inode, file, cmd, arg); + up(&devc->io_sema); + return ret; +} + +/* No mmap. */ + +static int vwsnd_audio_mmap(struct file *file, struct vm_area_struct *vma) +{ + DBGE("(file=0x%p, vma=0x%p)\n", file, vma); + return -ENODEV; +} + +/* + * Open the audio device for read and/or write. + * + * Returns 0 on success, -errno on failure. + */ + +static int vwsnd_audio_open(struct inode *inode, struct file *file) +{ + vwsnd_dev_t *devc; + int minor = iminor(inode); + int sw_samplefmt; + + DBGE("(inode=0x%p, file=0x%p)\n", inode, file); + + INC_USE_COUNT; + for (devc = vwsnd_dev_list; devc; devc = devc->next_dev) + if ((devc->audio_minor & ~0x0F) == (minor & ~0x0F)) + break; + + if (devc == NULL) { + DEC_USE_COUNT; + return -ENODEV; + } + + down(&devc->open_sema); + while (devc->open_mode & file->f_mode) { + up(&devc->open_sema); + if (file->f_flags & O_NONBLOCK) { + DEC_USE_COUNT; + return -EBUSY; + } + interruptible_sleep_on(&devc->open_wait); + if (signal_pending(current)) { + DEC_USE_COUNT; + return -ERESTARTSYS; + } + down(&devc->open_sema); + } + devc->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE); + up(&devc->open_sema); + + /* get default sample format from minor number. */ + + sw_samplefmt = 0; + if ((minor & 0xF) == SND_DEV_DSP) + sw_samplefmt = AFMT_U8; + else if ((minor & 0xF) == SND_DEV_AUDIO) + sw_samplefmt = AFMT_MU_LAW; + else if ((minor & 0xF) == SND_DEV_DSP16) + sw_samplefmt = AFMT_S16_LE; + else + ASSERT(0); + + /* Initialize vwsnd_ports. */ + + down(&devc->io_sema); + { + if (file->f_mode & FMODE_READ) { + devc->rport.swstate = SW_INITIAL; + devc->rport.flags = 0; + devc->rport.sw_channels = 1; + devc->rport.sw_samplefmt = sw_samplefmt; + devc->rport.sw_framerate = 8000; + devc->rport.sw_fragshift = DEFAULT_FRAGSHIFT; + devc->rport.sw_fragcount = DEFAULT_FRAGCOUNT; + devc->rport.sw_subdivshift = DEFAULT_SUBDIVSHIFT; + devc->rport.byte_count = 0; + devc->rport.frag_count = 0; + } + if (file->f_mode & FMODE_WRITE) { + devc->wport.swstate = SW_INITIAL; + devc->wport.flags = 0; + devc->wport.sw_channels = 1; + devc->wport.sw_samplefmt = sw_samplefmt; + devc->wport.sw_framerate = 8000; + devc->wport.sw_fragshift = DEFAULT_FRAGSHIFT; + devc->wport.sw_fragcount = DEFAULT_FRAGCOUNT; + devc->wport.sw_subdivshift = DEFAULT_SUBDIVSHIFT; + devc->wport.byte_count = 0; + devc->wport.frag_count = 0; + } + } + up(&devc->io_sema); + + file->private_data = devc; + DBGRV(); + return 0; +} + +/* + * Release (close) the audio device. + */ + +static int vwsnd_audio_release(struct inode *inode, struct file *file) +{ + vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data; + vwsnd_port_t *wport = NULL, *rport = NULL; + int err = 0; + + lock_kernel(); + down(&devc->io_sema); + { + DBGEV("(inode=0x%p, file=0x%p)\n", inode, file); + + if (file->f_mode & FMODE_READ) + rport = &devc->rport; + if (file->f_mode & FMODE_WRITE) { + wport = &devc->wport; + pcm_flush_frag(devc); + pcm_write_sync(devc); + } + pcm_shutdown(devc, rport, wport); + if (rport) + rport->swstate = SW_OFF; + if (wport) + wport->swstate = SW_OFF; + } + up(&devc->io_sema); + + down(&devc->open_sema); + { + devc->open_mode &= ~file->f_mode; + } + up(&devc->open_sema); + wake_up(&devc->open_wait); + DEC_USE_COUNT; + DBGR(); + unlock_kernel(); + return err; +} + +static struct file_operations vwsnd_audio_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = vwsnd_audio_read, + .write = vwsnd_audio_write, + .poll = vwsnd_audio_poll, + .ioctl = vwsnd_audio_ioctl, + .mmap = vwsnd_audio_mmap, + .open = vwsnd_audio_open, + .release = vwsnd_audio_release, +}; + +/*****************************************************************************/ +/* mixer driver */ + +/* open the mixer device. */ + +static int vwsnd_mixer_open(struct inode *inode, struct file *file) +{ + vwsnd_dev_t *devc; + + DBGEV("(inode=0x%p, file=0x%p)\n", inode, file); + + INC_USE_COUNT; + for (devc = vwsnd_dev_list; devc; devc = devc->next_dev) + if (devc->mixer_minor == iminor(inode)) + break; + + if (devc == NULL) { + DEC_USE_COUNT; + return -ENODEV; + } + file->private_data = devc; + return 0; +} + +/* release (close) the mixer device. */ + +static int vwsnd_mixer_release(struct inode *inode, struct file *file) +{ + DBGEV("(inode=0x%p, file=0x%p)\n", inode, file); + DEC_USE_COUNT; + return 0; +} + +/* mixer_read_ioctl handles all read ioctls on the mixer device. */ + +static int mixer_read_ioctl(vwsnd_dev_t *devc, unsigned int nr, void __user *arg) +{ + int val = -1; + + DBGEV("(devc=0x%p, nr=0x%x, arg=0x%p)\n", devc, nr, arg); + + switch (nr) { + case SOUND_MIXER_CAPS: + val = SOUND_CAP_EXCL_INPUT; + break; + + case SOUND_MIXER_DEVMASK: + val = (SOUND_MASK_PCM | SOUND_MASK_LINE | + SOUND_MASK_MIC | SOUND_MASK_CD | SOUND_MASK_RECLEV); + break; + + case SOUND_MIXER_STEREODEVS: + val = (SOUND_MASK_PCM | SOUND_MASK_LINE | + SOUND_MASK_MIC | SOUND_MASK_CD | SOUND_MASK_RECLEV); + break; + + case SOUND_MIXER_OUTMASK: + val = (SOUND_MASK_PCM | SOUND_MASK_LINE | + SOUND_MASK_MIC | SOUND_MASK_CD); + break; + + case SOUND_MIXER_RECMASK: + val = (SOUND_MASK_PCM | SOUND_MASK_LINE | + SOUND_MASK_MIC | SOUND_MASK_CD); + break; + + case SOUND_MIXER_PCM: + val = ad1843_get_gain(&devc->lith, &ad1843_gain_PCM); + break; + + case SOUND_MIXER_LINE: + val = ad1843_get_gain(&devc->lith, &ad1843_gain_LINE); + break; + + case SOUND_MIXER_MIC: + val = ad1843_get_gain(&devc->lith, &ad1843_gain_MIC); + break; + + case SOUND_MIXER_CD: + val = ad1843_get_gain(&devc->lith, &ad1843_gain_CD); + break; + + case SOUND_MIXER_RECLEV: + val = ad1843_get_gain(&devc->lith, &ad1843_gain_RECLEV); + break; + + case SOUND_MIXER_RECSRC: + val = ad1843_get_recsrc(&devc->lith); + break; + + case SOUND_MIXER_OUTSRC: + val = ad1843_get_outsrc(&devc->lith); + break; + + default: + return -EINVAL; + } + return put_user(val, (int __user *) arg); +} + +/* mixer_write_ioctl handles all write ioctls on the mixer device. */ + +static int mixer_write_ioctl(vwsnd_dev_t *devc, unsigned int nr, void __user *arg) +{ + int val; + int err; + + DBGEV("(devc=0x%p, nr=0x%x, arg=0x%p)\n", devc, nr, arg); + + err = get_user(val, (int __user *) arg); + if (err) + return -EFAULT; + switch (nr) { + case SOUND_MIXER_PCM: + val = ad1843_set_gain(&devc->lith, &ad1843_gain_PCM, val); + break; + + case SOUND_MIXER_LINE: + val = ad1843_set_gain(&devc->lith, &ad1843_gain_LINE, val); + break; + + case SOUND_MIXER_MIC: + val = ad1843_set_gain(&devc->lith, &ad1843_gain_MIC, val); + break; + + case SOUND_MIXER_CD: + val = ad1843_set_gain(&devc->lith, &ad1843_gain_CD, val); + break; + + case SOUND_MIXER_RECLEV: + val = ad1843_set_gain(&devc->lith, &ad1843_gain_RECLEV, val); + break; + + case SOUND_MIXER_RECSRC: + if (devc->rport.swbuf || devc->wport.swbuf) + return -EBUSY; /* can't change recsrc while running */ + val = ad1843_set_recsrc(&devc->lith, val); + break; + + case SOUND_MIXER_OUTSRC: + val = ad1843_set_outsrc(&devc->lith, val); + break; + + default: + return -EINVAL; + } + if (val < 0) + return val; + return put_user(val, (int __user *) arg); +} + +/* This is the ioctl entry to the mixer driver. */ + +static int vwsnd_mixer_ioctl(struct inode *ioctl, + struct file *file, + unsigned int cmd, + unsigned long arg) +{ + vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data; + const unsigned int nrmask = _IOC_NRMASK << _IOC_NRSHIFT; + const unsigned int nr = (cmd & nrmask) >> _IOC_NRSHIFT; + int retval; + + DBGEV("(devc=0x%p, cmd=0x%x, arg=0x%lx)\n", devc, cmd, arg); + + down(&devc->mix_sema); + { + if ((cmd & ~nrmask) == MIXER_READ(0)) + retval = mixer_read_ioctl(devc, nr, (void __user *) arg); + else if ((cmd & ~nrmask) == MIXER_WRITE(0)) + retval = mixer_write_ioctl(devc, nr, (void __user *) arg); + else + retval = -EINVAL; + } + up(&devc->mix_sema); + return retval; +} + +static struct file_operations vwsnd_mixer_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .ioctl = vwsnd_mixer_ioctl, + .open = vwsnd_mixer_open, + .release = vwsnd_mixer_release, +}; + +/*****************************************************************************/ +/* probe/attach/unload */ + +/* driver probe routine. Return nonzero if hardware is found. */ + +static int __init probe_vwsnd(struct address_info *hw_config) +{ + lithium_t lith; + int w; + unsigned long later; + + DBGEV("(hw_config=0x%p)\n", hw_config); + + /* XXX verify lithium present (to prevent crash on non-vw) */ + + if (li_create(&lith, hw_config->io_base) != 0) { + printk(KERN_WARNING "probe_vwsnd: can't map lithium\n"); + return 0; + } + later = jiffies + 2; + li_writel(&lith, LI_HOST_CONTROLLER, LI_HC_LINK_ENABLE); + do { + w = li_readl(&lith, LI_HOST_CONTROLLER); + } while (w == LI_HC_LINK_ENABLE && time_before(jiffies, later)); + + li_destroy(&lith); + + DBGPV("HC = 0x%04x\n", w); + + if ((w == LI_HC_LINK_ENABLE) || (w & LI_HC_LINK_CODEC)) { + + /* This may indicate a beta machine with no audio, + * or a future machine with different audio. + * On beta-release 320 w/ no audio, HC == 0x4000 */ + + printk(KERN_WARNING "probe_vwsnd: audio codec not found\n"); + return 0; + } + + if (w & LI_HC_LINK_FAILURE) { + printk(KERN_WARNING "probe_vwsnd: can't init audio codec\n"); + return 0; + } + + printk(KERN_INFO "vwsnd: lithium audio at mmio %#x irq %d\n", + hw_config->io_base, hw_config->irq); + + return 1; +} + +/* + * driver attach routine. Initialize driver data structures and + * initialize hardware. A new vwsnd_dev_t is allocated and put + * onto the global list, vwsnd_dev_list. + * + * Return +minor_dev on success, -errno on failure. + */ + +static int __init attach_vwsnd(struct address_info *hw_config) +{ + vwsnd_dev_t *devc = NULL; + int err = -ENOMEM; + + DBGEV("(hw_config=0x%p)\n", hw_config); + + devc = kmalloc(sizeof (vwsnd_dev_t), GFP_KERNEL); + if (devc == NULL) + goto fail0; + + err = li_create(&devc->lith, hw_config->io_base); + if (err) + goto fail1; + + init_waitqueue_head(&devc->open_wait); + + devc->rport.hwbuf_size = HWBUF_SIZE; + devc->rport.hwbuf_vaddr = __get_free_pages(GFP_KERNEL, HWBUF_ORDER); + if (!devc->rport.hwbuf_vaddr) + goto fail2; + devc->rport.hwbuf = (void *) devc->rport.hwbuf_vaddr; + devc->rport.hwbuf_paddr = virt_to_phys(devc->rport.hwbuf); + + /* + * Quote from the NT driver: + * + * // WARNING!!! HACK to setup output dma!!! + * // This is required because even on output there is some data + * // trickling into the input DMA channel. This is a bug in the + * // Lithium microcode. + * // --sde + * + * We set the input side's DMA base address here. It will remain + * valid until the driver is unloaded. + */ + + li_writel(&devc->lith, LI_COMM1_BASE, + devc->rport.hwbuf_paddr >> 8 | 1 << (37 - 8)); + + devc->wport.hwbuf_size = HWBUF_SIZE; + devc->wport.hwbuf_vaddr = __get_free_pages(GFP_KERNEL, HWBUF_ORDER); + if (!devc->wport.hwbuf_vaddr) + goto fail3; + devc->wport.hwbuf = (void *) devc->wport.hwbuf_vaddr; + devc->wport.hwbuf_paddr = virt_to_phys(devc->wport.hwbuf); + DBGP("wport hwbuf = 0x%p\n", devc->wport.hwbuf); + + DBGDO(shut_up++); + err = ad1843_init(&devc->lith); + DBGDO(shut_up--); + if (err) + goto fail4; + + /* install interrupt handler */ + + err = request_irq(hw_config->irq, vwsnd_audio_intr, 0, "vwsnd", devc); + if (err) + goto fail5; + + /* register this device's drivers. */ + + devc->audio_minor = register_sound_dsp(&vwsnd_audio_fops, -1); + if ((err = devc->audio_minor) < 0) { + DBGDO(printk(KERN_WARNING + "attach_vwsnd: register_sound_dsp error %d\n", + err)); + goto fail6; + } + devc->mixer_minor = register_sound_mixer(&vwsnd_mixer_fops, + devc->audio_minor >> 4); + if ((err = devc->mixer_minor) < 0) { + DBGDO(printk(KERN_WARNING + "attach_vwsnd: register_sound_mixer error %d\n", + err)); + goto fail7; + } + + /* Squirrel away device indices for unload routine. */ + + hw_config->slots[0] = devc->audio_minor; + + /* Initialize as much of *devc as possible */ + + init_MUTEX(&devc->open_sema); + init_MUTEX(&devc->io_sema); + init_MUTEX(&devc->mix_sema); + devc->open_mode = 0; + spin_lock_init(&devc->rport.lock); + init_waitqueue_head(&devc->rport.queue); + devc->rport.swstate = SW_OFF; + devc->rport.hwstate = HW_STOPPED; + devc->rport.flags = 0; + devc->rport.swbuf = NULL; + spin_lock_init(&devc->wport.lock); + init_waitqueue_head(&devc->wport.queue); + devc->wport.swstate = SW_OFF; + devc->wport.hwstate = HW_STOPPED; + devc->wport.flags = 0; + devc->wport.swbuf = NULL; + + /* Success. Link us onto the local device list. */ + + devc->next_dev = vwsnd_dev_list; + vwsnd_dev_list = devc; + return devc->audio_minor; + + /* So many ways to fail. Undo what we did. */ + + fail7: + unregister_sound_dsp(devc->audio_minor); + fail6: + free_irq(hw_config->irq, devc); + fail5: + fail4: + free_pages(devc->wport.hwbuf_vaddr, HWBUF_ORDER); + fail3: + free_pages(devc->rport.hwbuf_vaddr, HWBUF_ORDER); + fail2: + li_destroy(&devc->lith); + fail1: + kfree(devc); + fail0: + return err; +} + +static int __exit unload_vwsnd(struct address_info *hw_config) +{ + vwsnd_dev_t *devc, **devcp; + + DBGE("()\n"); + + devcp = &vwsnd_dev_list; + while ((devc = *devcp)) { + if (devc->audio_minor == hw_config->slots[0]) { + *devcp = devc->next_dev; + break; + } + devcp = &devc->next_dev; + } + + if (!devc) + return -ENODEV; + + unregister_sound_mixer(devc->mixer_minor); + unregister_sound_dsp(devc->audio_minor); + free_irq(hw_config->irq, devc); + free_pages(devc->wport.hwbuf_vaddr, HWBUF_ORDER); + free_pages(devc->rport.hwbuf_vaddr, HWBUF_ORDER); + li_destroy(&devc->lith); + kfree(devc); + + return 0; +} + +/*****************************************************************************/ +/* initialization and loadable kernel module interface */ + +static struct address_info the_hw_config = { + 0xFF001000, /* lithium phys addr */ + CO_IRQ(CO_APIC_LI_AUDIO) /* irq */ +}; + +MODULE_DESCRIPTION("SGI Visual Workstation sound module"); +MODULE_AUTHOR("Bob Miller <kbob@sgi.com>"); +MODULE_LICENSE("GPL"); + +static int __init init_vwsnd(void) +{ + int err; + + DBGXV("\n"); + DBGXV("sound::vwsnd::init_module()\n"); + + if (!probe_vwsnd(&the_hw_config)) + return -ENODEV; + + err = attach_vwsnd(&the_hw_config); + if (err < 0) + return err; + return 0; +} + +static void __exit cleanup_vwsnd(void) +{ + DBGX("sound::vwsnd::cleanup_module()\n"); + + unload_vwsnd(&the_hw_config); +} + +module_init(init_vwsnd); +module_exit(cleanup_vwsnd); |