summaryrefslogtreecommitdiffstats
path: root/sound/oss
diff options
context:
space:
mode:
Diffstat (limited to 'sound/oss')
-rw-r--r--sound/oss/Kconfig306
-rw-r--r--sound/oss/ad1889.c198
-rw-r--r--sound/oss/ad1889.h101
-rw-r--r--sound/oss/dmasound/tas_common.c4
4 files changed, 159 insertions, 450 deletions
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 88e52dc84c0..558c6ed443b 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -5,23 +5,9 @@
#
# Prompt user for primary drivers.
-config OBSOLETE_OSS_DRIVER
- bool "Obsolete OSS drivers"
- depends on SOUND_PRIME
- help
- This option enables support for obsolete OSS drivers that
- are scheduled for removal in the near future since there
- are ALSA drivers for the same hardware.
-
- Please contact Adrian Bunk <bunk@stusta.de> if you had to
- say Y here because your soundcard is not properly supported
- by ALSA.
-
- If unsure, say N.
-
config SOUND_BT878
tristate "BT878 audio dma"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ depends on SOUND_PRIME && PCI
---help---
Audio DMA support for bt878 based grabber boards. As you might have
already noticed, bt878 is listed with two functions in /proc/pci.
@@ -35,48 +21,9 @@ config SOUND_BT878
To compile this driver as a module, choose M here: the module will
be called btaudio.
-config SOUND_CMPCI
- tristate "C-Media PCI (CMI8338/8738)"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a PCI sound card using the CMI8338
- or the CMI8738 chipset. Data on these chips are available at
- <http://www.cmedia.com.tw/>.
-
- A userspace utility to control some internal registers of these
- chips is available at
- <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
-
-config SOUND_CMPCI_FM
- bool "Enable legacy FM"
- depends on SOUND_CMPCI && X86
- help
- Say Y here to enable the legacy FM (frequency-modulation) synthesizer
- support on a card using the CMI8338 or CMI8378 chipset. Even it is
- enabled, you need to set fmio as proper value to enable it.
- Say N here if you don't need this.
-
-config SOUND_CMPCI_MIDI
- bool "Enable legacy MPU-401"
- depends on SOUND_CMPCI && X86
- help
- Say Y here to enable the legacy MPU401 MIDI synthesizer support on a
- card using the CMI8338 or CMI8378 chipset. Even it is enabled,
- you need to set mpuio as proper value to enable it.
- Say N here if you don't need this.
-
-config SOUND_CMPCI_JOYSTICK
- bool "Enable joystick"
- depends on SOUND_CMPCI && X86 && (GAMEPORT=y || SOUND_CMPCI=GAMEPORT)
- help
- Say Y here in order to enable the joystick port on a sound card using
- the CMI8338 or the CMI8738 chipset. You need to config the
- gameport support and set joystick parameter as 1 to use it.
- Say N here if you don't need this.
-
config SOUND_EMU10K1
tristate "Creative SBLive! (EMU10K1)"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ depends on SOUND_PRIME && PCI
---help---
Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
such as the Creative SBLive!, SB PCI512 or Emu-APS.
@@ -108,13 +55,6 @@ config SOUND_FUSION
series) when wired as native sound drivers with AC97 codecs. If
this driver does not work try the CS4232 driver.
-config SOUND_CS4281
- tristate "Crystal Sound CS4281"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Picture and feature list at
- <http://www.pcbroker.com/crystal4281.html>.
-
config SOUND_BCM_CS4297A
tristate "Crystal Sound CS4297a (for Swarm)"
depends on SOUND_PRIME && SIBYTE_SWARM
@@ -125,22 +65,9 @@ config SOUND_BCM_CS4297A
note that CONFIG_KGDB should not be enabled at the same
time, since it also attempts to use this UART port.
-config SOUND_ES1370
- tristate "Ensoniq AudioPCI (ES1370)"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a PCI sound card utilizing the Ensoniq
- ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
- out if your sound card uses an ES1370 without removing your
- computer's cover, use lspci -n and look for the PCI ID
- 1274:5000. Since Ensoniq was bought by Creative Labs,
- Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
- This driver differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/oss/es1370>.
-
config SOUND_ES1371
tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ depends on SOUND_PRIME && PCI
help
Say Y or M if you have a PCI sound card utilizing the Ensoniq
ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
@@ -151,33 +78,6 @@ config SOUND_ES1371
slightly from OSS/Free, so PLEASE READ
<file:Documentation/sound/oss/es1371>.
-config SOUND_ESSSOLO1
- tristate "ESS Technology Solo1"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a PCI sound card utilizing the ESS Technology
- Solo1 chip. To find out if your sound card uses a
- Solo1 chip without removing your computer's cover, use
- lspci -n and look for the PCI ID 125D:1969. This driver
- differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/oss/solo1>.
-
-config SOUND_MAESTRO
- tristate "ESS Maestro, Maestro2, Maestro2E driver"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a sound system driven by ESS's Maestro line
- of PCI sound chips. These include the Maestro 1, Maestro 2, and
- Maestro 2E. See <file:Documentation/sound/oss/Maestro> for more
- details.
-
-config SOUND_MAESTRO3
- tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
- depends on SOUND_PRIME && PCI && EXPERIMENTAL && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a sound system driven by ESS's Maestro 3
- PCI sound chip.
-
config SOUND_ICH
tristate "Intel ICH (i8xx) audio support"
depends on SOUND_PRIME && PCI
@@ -185,24 +85,6 @@ config SOUND_ICH
Support for integral audio in Intel's I/O Controller Hub (ICH)
chipset, as used on the 810/820/840 motherboards.
-config SOUND_HARMONY
- tristate "PA Harmony audio driver"
- depends on GSC_LASI && SOUND_PRIME && OBSOLETE_OSS_DRIVER
- help
- Say 'Y' or 'M' to include support for Harmony soundchip
- on HP 712, 715/new and many other GSC based machines.
-
-config SOUND_SONICVIBES
- tristate "S3 SonicVibes"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a PCI sound card utilizing the S3
- SonicVibes chipset. To find out if your sound card uses a
- SonicVibes chip without removing your computer's cover, use
- lspci -n and look for the PCI ID 5333:CA00. This driver
- differs slightly from OSS/Free, so PLEASE READ
- <file:Documentation/sound/oss/sonicvibes>.
-
config SOUND_VWSND
tristate "SGI Visual Workstation Sound"
depends on SOUND_PRIME && X86_VISWS
@@ -231,10 +113,6 @@ config SOUND_VRC5477
integrated, multi-function controller chip for MIPS CPUs. Works
with the AC97 codec.
-config SOUND_AU1000
- tristate "Au1000 Sound"
- depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && OBSOLETE_OSS_DRIVER
-
config SOUND_AU1550_AC97
tristate "Au1550 AC97 Sound"
depends on SOUND_PRIME && SOC_AU1550
@@ -507,7 +385,7 @@ config MSND_FIFOSIZE
config SOUND_VIA82CXXX
tristate "VIA 82C686 Audio Codec"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+ depends on SOUND_PRIME && PCI
help
Say Y here to include support for the audio codec found on VIA
82Cxxx-based chips. Typically these are built into a motherboard.
@@ -576,18 +454,6 @@ config SOUND_AD1889
Say M here if you have a sound card based on the Analog Devices
AD1889 chip.
-config SOUND_SGALAXY
- tristate "Aztech Sound Galaxy (non-PnP) cards"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- This module initializes the older non Plug and Play sound galaxy
- cards from Aztech. It supports the Waverider Pro 32 - 3D and the
- Galaxy Washington 16.
-
- If you compile the driver into the kernel, you have to add
- "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command
- line.
-
config SOUND_ADLIB
tristate "Adlib Cards"
depends on SOUND_OSS
@@ -614,7 +480,7 @@ config SOUND_ACI_MIXER
config SOUND_CS4232
tristate "Crystal CS4232 based (PnP) cards"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+ depends on SOUND_OSS
help
Say Y here if you have a card based on the Crystal CS4232 chip set,
which uses its own Plug and Play protocol.
@@ -626,42 +492,6 @@ config SOUND_CS4232
See <file:Documentation/sound/oss/CS4232> for more information on
configuring this card.
-config SOUND_SSCAPE
- tristate "Ensoniq SoundScape support"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Answer Y if you have a sound card based on the Ensoniq SoundScape
- chipset. Such cards are being manufactured at least by Ensoniq, Spea
- and Reveal (Reveal makes also other cards).
-
- If you compile the driver into the kernel, you have to add
- "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
- line.
-
-config SOUND_GUS
- tristate "Gravis Ultrasound support"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Say Y here for any type of Gravis Ultrasound card, including the GUS
- or GUS MAX. See also <file:Documentation/sound/oss/ultrasound> for more
- information on configuring this card with modules.
-
- If you compile the driver into the kernel, you have to add
- "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
-
-config SOUND_GUS16
- bool "16 bit sampling option of GUS (_NOT_ GUS MAX)"
- depends on SOUND_GUS
- help
- Support for Gravis Ulstrasound (GUS) cards (other than the GUS),
- sampling at 16-bit width.
-
-config SOUND_GUSMAX
- bool "GUS MAX support"
- depends on SOUND_GUS
- help
- Support for Gravis Ulstrasound MAX.
-
config SOUND_VMIDI
tristate "Loopback MIDI device support"
depends on SOUND_OSS
@@ -742,7 +572,7 @@ config SOUND_MPU401
config SOUND_NM256
tristate "NM256AV/NM256ZX audio support"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+ depends on SOUND_OSS
help
Say M here to include audio support for the NeoMagic 256AV/256ZX
chipsets. These are the audio chipsets found in the Sony
@@ -752,35 +582,6 @@ config SOUND_NM256
See <file:Documentation/sound/oss/NM256> for further information.
-config SOUND_MAD16
- tristate "OPTi MAD16 and/or Mozart based cards"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- ---help---
- Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
- 82C928 or 82C929 or 82C931) audio interface chip. These chips are
- quite common so it's possible that many no-name cards have one of
- them. In addition the MAD16 chip is used in some cards made by known
- manufacturers such as Turtle Beach (Tropez), Reveal (some models)
- and Diamond (latest ones). Note however that the Tropez sound cards
- have their own driver; if you have one of those, say N here and Y or
- M to "Full support for Turtle Beach WaveFront", below.
-
- If you compile the driver into the kernel, you have to add
- "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
- kernel command line.
-
- See also <file:Documentation/sound/oss/Opti> and
- <file:Documentation/sound/oss/MAD16> for more information on setting
- these cards up as modules.
-
-config MAD16_OLDCARD
- bool "Support MIDI in older MAD16 based cards (requires SB)"
- depends on SOUND_MAD16
- help
- Answer Y (or M) if you have an older card based on the C928 or
- Mozart chipset and you want to have MIDI support. If you enable this
- option you also need to enable support for Sound Blaster.
-
config SOUND_PAS
tristate "ProAudioSpectrum 16 support"
depends on SOUND_OSS
@@ -873,53 +674,9 @@ config SOUND_SB
You can say M here to compile this driver as a module; the module is
called sb.
-config SOUND_AWE32_SYNTH
- tristate "AWE32 synth"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
- similar sound card. See <file:Documentation/sound/oss/README.awe>,
- <file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE
- mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
- for more info.
-
-config SOUND_WAVEFRONT
- tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
- depends on SOUND_OSS && m && OBSOLETE_OSS_DRIVER
- help
- Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
- and read the files <file:Documentation/sound/oss/Wavefront> and
- <file:Documentation/sound/oss/Tropez+>.
-
-config SOUND_MAUI
- tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
- sound card.
-
- If you compile the driver into the kernel, you have to add
- "maui=<io>,<irq>" to the kernel command line.
-
-config MAUI_HAVE_BOOT
- bool "Have OSWF.MOT firmware file"
- depends on SOUND_MAUI=y && !STANDALONE
- help
- Turtle Beach Maui and Tropez sound cards have a microcontroller
- which needs to be initialized prior to use. OSWF.MOT is a file
- distributed with the card's DOS/Windows drivers. Answer Y if you
- have this file.
-
-config MAUI_BOOT_FILE
- string "Full pathname of OSWF.MOT firmware file"
- depends on MAUI_HAVE_BOOT
- default "/etc/sound/oswf.mot"
- help
- Enter the full pathname of your OSWF.MOT file, starting from /.
-
config SOUND_YM3812
tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+ depends on SOUND_OSS
---help---
Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
Answering Y is usually a safe and recommended choice, however some
@@ -933,18 +690,6 @@ config SOUND_YM3812
If unsure, say Y.
-config SOUND_OPL3SA1
- tristate "Yamaha OPL3-SA1 audio controller"
- depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
- usually built into motherboards. Read
- <file:Documentation/sound/oss/OPL3-SA> for details.
-
- If you compile the driver into the kernel, you have to add
- "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
- command line.
-
config SOUND_OPL3SA2
tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
depends on SOUND_OSS
@@ -959,19 +704,6 @@ config SOUND_OPL3SA2
"opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
command line.
-config SOUND_YMFPCI
- tristate "Yamaha YMF7xx PCI audio (native mode)"
- depends on SOUND_OSS && PCI && OBSOLETE_OSS_DRIVER
- help
- Support for Yamaha cards including the YMF711, YMF715, YMF718,
- YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
-
-config SOUND_YMFPCI_LEGACY
- bool "Yamaha PCI legacy ports support"
- depends on SOUND_YMFPCI
- help
- Support for YMF7xx PCI cards emulating an MP401.
-
config SOUND_UART6850
tristate "6850 UART support"
depends on SOUND_OSS
@@ -1101,30 +833,6 @@ config SOUND_KAHLUA
tristate "XpressAudio Sound Blaster emulation"
depends on SOUND_SB
-config SOUND_ALI5455
- tristate "ALi5455 audio support"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-
-config SOUND_FORTE
- tristate "ForteMedia FM801 driver"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you want driver support for the ForteMedia FM801 PCI
- audio controller (Abit AU10, Genius Sound Maker, HP Workstation
- zx2000, and others).
-
-config SOUND_RME96XX
- tristate "RME Hammerfall (RME96XX) support"
- depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
- help
- Say Y or M if you have a Hammerfall or Hammerfall light
- multichannel card from RME. If you want to access advanced
- features of the card, read <file:Documentation/sound/oss/rme96xx>.
-
-config SOUND_AD1980
- tristate "AD1980 front/back switch plugin"
- depends on SOUND_PRIME && OBSOLETE_OSS_DRIVER
-
config SOUND_SH_DAC_AUDIO
tristate "SuperH DAC audio support"
depends on SOUND_PRIME && CPU_SH3
diff --git a/sound/oss/ad1889.c b/sound/oss/ad1889.c
index 54dabf86280..a4ca7569e70 100644
--- a/sound/oss/ad1889.c
+++ b/sound/oss/ad1889.c
@@ -75,7 +75,7 @@ static inline void ad1889_set_wav_rate(ad1889_dev_t *dev, int rate)
DBG("Setting WAV rate to %d\n", rate);
dev->state[AD_WAV_STATE].dmabuf.rate = rate;
- AD1889_WRITEW(dev, AD_DSWAS, rate);
+ AD1889_WRITEW(dev, AD_DS_WAS, rate);
/* Cycle the DAC to enable the new rate */
ac97_codec->codec_write(dev->ac97_codec, AC97_POWER_CONTROL, 0x0200);
@@ -89,14 +89,14 @@ static inline void ad1889_set_wav_fmt(ad1889_dev_t *dev, int fmt)
DBG("Setting WAV format to 0x%x\n", fmt);
- tmp = AD1889_READW(ad1889_dev, AD_DSWSMC);
+ tmp = AD1889_READW(ad1889_dev, AD_DS_WSMC);
if (fmt & AFMT_S16_LE) {
//tmp |= 0x0100; /* set WA16 */
tmp |= 0x0300; /* set WA16 stereo */
} else if (fmt & AFMT_U8) {
tmp &= ~0x0100; /* clear WA16 */
}
- AD1889_WRITEW(ad1889_dev, AD_DSWSMC, tmp);
+ AD1889_WRITEW(ad1889_dev, AD_DS_WSMC, tmp);
}
static inline void ad1889_set_adc_fmt(ad1889_dev_t *dev, int fmt)
@@ -105,13 +105,13 @@ static inline void ad1889_set_adc_fmt(ad1889_dev_t *dev, int fmt)
DBG("Setting ADC format to 0x%x\n", fmt);
- tmp = AD1889_READW(ad1889_dev, AD_DSRAMC);
+ tmp = AD1889_READW(ad1889_dev, AD_DS_RAMC);
if (fmt & AFMT_S16_LE) {
tmp |= 0x0100; /* set WA16 */
} else if (fmt & AFMT_U8) {
tmp &= ~0x0100; /* clear WA16 */
}
- AD1889_WRITEW(ad1889_dev, AD_DSRAMC, tmp);
+ AD1889_WRITEW(ad1889_dev, AD_DS_RAMC, tmp);
}
static void ad1889_start_wav(ad1889_state_t *state)
@@ -145,21 +145,21 @@ static void ad1889_start_wav(ad1889_state_t *state)
dmabuf->rd_ptr, dmabuf->dma_len);
/* load up the current register set */
- AD1889_WRITEL(ad1889_dev, AD_DMAWAVCC, cnt);
- AD1889_WRITEL(ad1889_dev, AD_DMAWAVICC, cnt);
- AD1889_WRITEL(ad1889_dev, AD_DMAWAVCA, dmabuf->dma_handle);
+ AD1889_WRITEL(ad1889_dev, AD_DMA_WAVCC, cnt);
+ AD1889_WRITEL(ad1889_dev, AD_DMA_WAVICC, cnt);
+ AD1889_WRITEL(ad1889_dev, AD_DMA_WAVCA, dmabuf->dma_handle);
/* TODO: for now we load the base registers with the same thing */
- AD1889_WRITEL(ad1889_dev, AD_DMAWAVBC, cnt);
- AD1889_WRITEL(ad1889_dev, AD_DMAWAVIBC, cnt);
- AD1889_WRITEL(ad1889_dev, AD_DMAWAVBA, dmabuf->dma_handle);
+ AD1889_WRITEL(ad1889_dev, AD_DMA_WAVBC, cnt);
+ AD1889_WRITEL(ad1889_dev, AD_DMA_WAVIBC, cnt);
+ AD1889_WRITEL(ad1889_dev, AD_DMA_WAVBA, dmabuf->dma_handle);
/* and we're off to the races... */
- AD1889_WRITEL(ad1889_dev, AD_DMACHSS, 0x8);
- tmp = AD1889_READW(ad1889_dev, AD_DSWSMC);
+ AD1889_WRITEL(ad1889_dev, AD_DMA_CHSS, 0x8);
+ tmp = AD1889_READW(ad1889_dev, AD_DS_WSMC);
tmp |= 0x0400; /* set WAEN */
- AD1889_WRITEW(ad1889_dev, AD_DSWSMC, tmp);
- (void) AD1889_READW(ad1889_dev, AD_DSWSMC); /* flush posted PCI write */
+ AD1889_WRITEW(ad1889_dev, AD_DS_WSMC, tmp);
+ (void) AD1889_READW(ad1889_dev, AD_DS_WSMC); /* flush posted PCI write */
dmabuf->enable |= DAC_RUNNING;
@@ -179,10 +179,10 @@ static void ad1889_stop_wav(ad1889_state_t *state)
u16 tmp;
unsigned long cnt = dmabuf->dma_len;
- tmp = AD1889_READW(ad1889_dev, AD_DSWSMC);
+ tmp = AD1889_READW(ad1889_dev, AD_DS_WSMC);
tmp &= ~0x0400; /* clear WAEN */
- AD1889_WRITEW(ad1889_dev, AD_DSWSMC, tmp);
- (void) AD1889_READW(ad1889_dev, AD_DSWSMC); /* flush posted PCI write */
+ AD1889_WRITEW(ad1889_dev, AD_DS_WSMC, tmp);
+ (void) AD1889_READW(ad1889_dev, AD_DS_WSMC); /* flush posted PCI write */
pci_unmap_single(ad1889_dev->pci, dmabuf->dma_handle,
cnt, PCI_DMA_TODEVICE);
@@ -211,7 +211,7 @@ static void ad1889_startstop_adc(ad1889_state_t *state, int start)
spin_lock_irqsave(&state->card->lock, flags);
- tmp = AD1889_READW(ad1889_dev, AD_DSRAMC);
+ tmp = AD1889_READW(ad1889_dev, AD_DS_RAMC);
if (start) {
state->dmabuf.enable |= ADC_RUNNING;
tmp |= 0x0004; /* set ADEN */
@@ -219,7 +219,7 @@ static void ad1889_startstop_adc(ad1889_state_t *state, int start)
state->dmabuf.enable &= ~ADC_RUNNING;
tmp &= ~0x0004; /* clear ADEN */
}
- AD1889_WRITEW(ad1889_dev, AD_DSRAMC, tmp);
+ AD1889_WRITEW(ad1889_dev, AD_DS_RAMC, tmp);
spin_unlock_irqrestore(&state->card->lock, flags);
}
@@ -301,53 +301,53 @@ static int ad1889_read_proc (char *page, char **start, off_t off,
int len, i;
ad1889_dev_t *dev = data;
ad1889_reg_t regs[] = {
- { "WSMC", AD_DSWSMC, 16 },
- { "RAMC", AD_DSRAMC, 16 },
- { "WADA", AD_DSWADA, 16 },
- { "SYDA", AD_DSSYDA, 16 },
- { "WAS", AD_DSWAS, 16 },
- { "RES", AD_DSRES, 16 },
- { "CCS", AD_DSCCS, 16 },
- { "ADCBA", AD_DMAADCBA, 32 },
- { "ADCCA", AD_DMAADCCA, 32 },
- { "ADCBC", AD_DMAADCBC, 32 },
- { "ADCCC", AD_DMAADCCC, 32 },
- { "ADCIBC", AD_DMAADCIBC, 32 },
- { "ADCICC", AD_DMAADCICC, 32 },
- { "ADCCTRL", AD_DMAADCCTRL, 16 },
- { "WAVBA", AD_DMAWAVBA, 32 },
- { "WAVCA", AD_DMAWAVCA, 32 },
- { "WAVBC", AD_DMAWAVBC, 32 },
- { "WAVCC", AD_DMAWAVCC, 32 },
- { "WAVIBC", AD_DMAWAVIBC, 32 },
- { "WAVICC", AD_DMAWAVICC, 32 },
- { "WAVCTRL", AD_DMAWAVCTRL, 16 },
- { "DISR", AD_DMADISR, 32 },
- { "CHSS", AD_DMACHSS, 32 },
- { "IPC", AD_GPIOIPC, 16 },
- { "OP", AD_GPIOOP, 16 },
- { "IP", AD_GPIOIP, 16 },
- { "ACIC", AD_ACIC, 16 },
- { "AC97_RESET", 0x100 + AC97_RESET, 16 },
- { "AC97_MASTER_VOL_STEREO", 0x100 + AC97_MASTER_VOL_STEREO, 16 },
- { "AC97_HEADPHONE_VOL", 0x100 + AC97_HEADPHONE_VOL, 16 },
- { "AC97_MASTER_VOL_MONO", 0x100 + AC97_MASTER_VOL_MONO, 16 },
- { "AC97_MASTER_TONE", 0x100 + AC97_MASTER_TONE, 16 },
- { "AC97_PCBEEP_VOL", 0x100 + AC97_PCBEEP_VOL, 16 },
- { "AC97_PHONE_VOL", 0x100 + AC97_PHONE_VOL, 16 },
- { "AC97_MIC_VOL", 0x100 + AC97_MIC_VOL, 16 },
- { "AC97_LINEIN_VOL", 0x100 + AC97_LINEIN_VOL, 16 },
- { "AC97_CD_VOL", 0x100 + AC97_CD_VOL, 16 },
- { "AC97_VIDEO_VOL", 0x100 + AC97_VIDEO_VOL, 16 },
- { "AC97_AUX_VOL", 0x100 + AC97_AUX_VOL, 16 },
- { "AC97_PCMOUT_VOL", 0x100 + AC97_PCMOUT_VOL, 16 },
- { "AC97_RECORD_SELECT", 0x100 + AC97_RECORD_SELECT, 16 },
- { "AC97_RECORD_GAIN", 0x100 + AC97_RECORD_GAIN, 16 },
- { "AC97_RECORD_GAIN_MIC", 0x100 + AC97_RECORD_GAIN_MIC, 16 },
- { "AC97_GENERAL_PURPOSE", 0x100 + AC97_GENERAL_PURPOSE, 16 },
- { "AC97_3D_CONTROL", 0x100 + AC97_3D_CONTROL, 16 },
- { "AC97_MODEM_RATE", 0x100 + AC97_MODEM_RATE, 16 },
- { "AC97_POWER_CONTROL", 0x100 + AC97_POWER_CONTROL, 16 },
+ { "WSMC", AD_DS_WSMC, 16 },
+ { "RAMC", AD_DS_RAMC, 16 },
+ { "WADA", AD_DS_WADA, 16 },
+ { "SYDA", AD_DS_SYDA, 16 },
+ { "WAS", AD_DS_WAS, 16 },
+ { "RES", AD_DS_RES, 16 },
+ { "CCS", AD_DS_CCS, 16 },
+ { "ADCBA", AD_DMA_ADCBA, 32 },
+ { "ADCCA", AD_DMA_ADCCA, 32 },
+ { "ADCBC", AD_DMA_ADCBC, 32 },
+ { "ADCCC", AD_DMA_ADCCC, 32 },
+ { "ADCIBC", AD_DMA_ADCIBC, 32 },
+ { "ADCICC", AD_DMA_ADCICC, 32 },
+ { "ADCCTRL", AD_DMA_ADCCTRL, 16 },
+ { "WAVBA", AD_DMA_WAVBA, 32 },
+ { "WAVCA", AD_DMA_WAVCA, 32 },
+ { "WAVBC", AD_DMA_WAVBC, 32 },
+ { "WAVCC", AD_DMA_WAVCC, 32 },
+ { "WAVIBC", AD_DMA_WAVIBC, 32 },
+ { "WAVICC", AD_DMA_WAVICC, 32 },
+ { "WAVCTRL", AD_DMA_WAVCTRL, 16 },
+ { "DISR", AD_DMA_DISR, 32 },
+ { "CHSS", AD_DMA_CHSS, 32 },
+ { "IPC", AD_GPIO_IPC, 16 },
+ { "OP", AD_GPIO_OP, 16 },
+ { "IP", AD_GPIO_IP, 16 },
+ { "ACIC", AD_AC97_ACIC, 16 },
+ { "AC97_RESET", AD_AC97_BASE + AC97_RESET, 16 },
+ { "AC97_MASTER_VOL_STEREO", AD_AC97_BASE + AC97_MASTER_VOL_STEREO, 16 },
+ { "AC97_HEADPHONE_VOL", AD_AC97_BASE + AC97_HEADPHONE_VOL, 16 },
+ { "AC97_MASTER_VOL_MONO", AD_AC97_BASE + AC97_MASTER_VOL_MONO, 16 },
+ { "AC97_MASTER_TONE", AD_AC97_BASE + AC97_MASTER_TONE, 16 },
+ { "AC97_PCBEEP_VOL", AD_AC97_BASE + AC97_PCBEEP_VOL, 16 },
+ { "AC97_PHONE_VOL", AD_AC97_BASE + AC97_PHONE_VOL, 16 },
+ { "AC97_MIC_VOL", AD_AC97_BASE + AC97_MIC_VOL, 16 },
+ { "AC97_LINEIN_VOL", AD_AC97_BASE + AC97_LINEIN_VOL, 16 },
+ { "AC97_CD_VOL", AD_AC97_BASE + AC97_CD_VOL, 16 },
+ { "AC97_VIDEO_VOL", AD_AC97_BASE + AC97_VIDEO_VOL, 16 },
+ { "AC97_AUX_VOL", AD_AC97_BASE + AC97_AUX_VOL, 16 },
+ { "AC97_PCMOUT_VOL", AD_AC97_BASE + AC97_PCMOUT_VOL, 16 },
+ { "AC97_RECORD_SELECT", AD_AC97_BASE + AC97_RECORD_SELECT, 16 },
+ { "AC97_RECORD_GAIN", AD_AC97_BASE + AC97_RECORD_GAIN, 16 },
+ { "AC97_RECORD_GAIN_MIC", AD_AC97_BASE + AC97_RECORD_GAIN_MIC, 16 },
+ { "AC97_GENERAL_PURPOSE", AD_AC97_BASE + AC97_GENERAL_PURPOSE, 16 },
+ { "AC97_3D_CONTROL", AD_AC97_BASE + AC97_3D_CONTROL, 16 },
+ { "AC97_MODEM_RATE", AD_AC97_BASE + AC97_MODEM_RATE, 16 },
+ { "AC97_POWER_CONTROL", AD_AC97_BASE + AC97_POWER_CONTROL, 16 },
{ NULL }
};
@@ -400,9 +400,9 @@ static inline unsigned long ad1889_get_dma_addr(ad1889_state_t *state)
}
if (dmabuf->enable & DAC_RUNNING)
- offset = le32_to_cpu(AD1889_READL(state->card, AD_DMAWAVBA));
+ offset = le32_to_cpu(AD1889_READL(state->card, AD_DMA_WAVBA));
else
- offset = le32_to_cpu(AD1889_READL(state->card, AD_DMAADCBA));
+ offset = le32_to_cpu(AD1889_READL(state->card, AD_DMA_ADCBA));
return (unsigned long)bus_to_virt((unsigned long)offset) - (unsigned long)dmabuf->rawbuf;
}
@@ -639,9 +639,9 @@ static int ad1889_ioctl(struct inode *inode, struct file *file, unsigned int cmd
if (val > 5400 && val < 48000)
{
if (file->f_mode & FMODE_WRITE)
- AD1889_WRITEW(ad1889_dev, AD_DSWAS, val);
+ AD1889_WRITEW(ad1889_dev, AD_DS_WAS, val);
if (file->f_mode & FMODE_READ)
- AD1889_WRITEW(ad1889_dev, AD_DSRES, val);
+ AD1889_WRITEW(ad1889_dev, AD_DS_RES, val);
}
return 0;
@@ -649,22 +649,22 @@ static int ad1889_ioctl(struct inode *inode, struct file *file, unsigned int cmd
if (get_user(val, p))
return -EFAULT;
if (file->f_mode & FMODE_READ) {
- val = AD1889_READW(ad1889_dev, AD_DSWSMC);
+ val = AD1889_READW(ad1889_dev, AD_DS_WSMC);
if (val) {
val |= 0x0200; /* set WAST */
} else {
val &= ~0x0200; /* clear WAST */
}
- AD1889_WRITEW(ad1889_dev, AD_DSWSMC, val);
+ AD1889_WRITEW(ad1889_dev, AD_DS_WSMC, val);
}
if (file->f_mode & FMODE_WRITE) {
- val = AD1889_READW(ad1889_dev, AD_DSRAMC);
+ val = AD1889_READW(ad1889_dev, AD_DS_RAMC);
if (val) {
val |= 0x0002; /* set ADST */
} else {
val &= ~0x0002; /* clear ADST */
}
- AD1889_WRITEW(ad1889_dev, AD_DSRAMC, val);
+ AD1889_WRITEW(ad1889_dev, AD_DS_RAMC, val);
}
return 0;
@@ -739,7 +739,7 @@ static int ad1889_ioctl(struct inode *inode, struct file *file, unsigned int cmd
break;
case SOUND_PCM_READ_RATE:
- return put_user(AD1889_READW(ad1889_dev, AD_DSWAS), p);
+ return put_user(AD1889_READW(ad1889_dev, AD_DS_WAS), p);
case SOUND_PCM_READ_CHANNELS:
case SOUND_PCM_READ_BITS:
@@ -769,7 +769,7 @@ static int ad1889_open(struct inode *inode, struct file *file)
ad1889_set_wav_rate(ad1889_dev, 48000);
ad1889_set_wav_fmt(ad1889_dev, AFMT_S16_LE);
- AD1889_WRITEW(ad1889_dev, AD_DSWADA, 0x0404); /* attenuation */
+ AD1889_WRITEW(ad1889_dev, AD_DS_WADA, 0x0404); /* attenuation */
return nonseekable_open(inode, file);
}
@@ -826,15 +826,15 @@ static void ad1889_codec_write(struct ac97_codec *ac97, u8 reg, u16 val)
{
ad1889_dev_t *dev = ac97->private_data;
- //DBG("Writing 0x%x to 0x%lx\n", val, dev->regbase + 0x100 + reg);
- AD1889_WRITEW(dev, 0x100 + reg, val);
+ //DBG("Writing 0x%x to 0x%lx\n", val, dev->regbase + AD_AC97_BASE + reg);
+ AD1889_WRITEW(dev, AD_AC97_BASE + reg, val);
}
static u16 ad1889_codec_read(struct ac97_codec *ac97, u8 reg)
{
ad1889_dev_t *dev = ac97->private_data;
- //DBG("Reading from 0x%lx\n", dev->regbase + 0x100 + reg);
- return AD1889_READW(dev, 0x100 + reg);
+ //DBG("Reading from 0x%lx\n", dev->regbase + AD_AC97_BASE + reg);
+ return AD1889_READW(dev, AD_AC97_BASE + reg);
}
static int ad1889_ac97_init(ad1889_dev_t *dev, int id)
@@ -883,24 +883,24 @@ static int ad1889_aclink_reset(struct pci_dev * pcidev)
int retry = 200;
ad1889_dev_t *dev = pci_get_drvdata(pcidev);
- AD1889_WRITEW(dev, AD_DSCCS, 0x8000); /* turn on clock */
- AD1889_READW(dev, AD_DSCCS);
+ AD1889_WRITEW(dev, AD_DS_CCS, 0x8000); /* turn on clock */
+ AD1889_READW(dev, AD_DS_CCS);
WAIT_10MS();
- stat = AD1889_READW(dev, AD_ACIC);
+ stat = AD1889_READW(dev, AD_AC97_ACIC);
stat |= 0x0002; /* Reset Disable */
- AD1889_WRITEW(dev, AD_ACIC, stat);
- (void) AD1889_READW(dev, AD_ACIC); /* flush posted write */
+ AD1889_WRITEW(dev, AD_AC97_ACIC, stat);
+ (void) AD1889_READW(dev, AD_AC97_ACIC); /* flush posted write */
udelay(10);
- stat = AD1889_READW(dev, AD_ACIC);
+ stat = AD1889_READW(dev, AD_AC97_ACIC);
stat |= 0x0001; /* Interface Enable */
- AD1889_WRITEW(dev, AD_ACIC, stat);
+ AD1889_WRITEW(dev, AD_AC97_ACIC, stat);
do {
- if (AD1889_READW(dev, AD_ACIC) & 0x8000) /* Ready */
+ if (AD1889_READW(dev, AD_AC97_ACIC) & 0x8000) /* Ready */
break;
WAIT_10MS();
retry--;
@@ -908,16 +908,16 @@ static int ad1889_aclink_reset(struct pci_dev * pcidev)
if (!retry) {
printk(KERN_ERR "ad1889_aclink_reset: codec is not ready [0x%x]\n",
- AD1889_READW(dev, AD_ACIC));
+ AD1889_READW(dev, AD_AC97_ACIC));
return -EBUSY;
}
/* TODO reset AC97 codec */
/* TODO set wave/adc pci ctrl status */
- stat = AD1889_READW(dev, AD_ACIC);
+ stat = AD1889_READW(dev, AD_AC97_ACIC);
stat |= 0x0004; /* Audio Stream Output Enable */
- AD1889_WRITEW(dev, AD_ACIC, stat);
+ AD1889_WRITEW(dev, AD_AC97_ACIC, stat);
return 0;
}
@@ -935,10 +935,10 @@ static irqreturn_t ad1889_interrupt(int irq, void *dev_id, struct pt_regs *regs)
u32 stat;
ad1889_dev_t *dev = (ad1889_dev_t *)dev_id;
- stat = AD1889_READL(dev, AD_DMADISR);
+ stat = AD1889_READL(dev, AD_DMA_DISR);
/* clear ISR */
- AD1889_WRITEL(dev, AD_DMADISR, stat);
+ AD1889_WRITEL(dev, AD_DMA_DISR, stat);
if (stat & 0x8) { /* WAVI */
DBG("WAV interrupt\n");
@@ -964,15 +964,15 @@ static void ad1889_initcfg(ad1889_dev_t *dev)
u32 tmp32;
/* make sure the interrupt bits are setup the way we want */
- tmp32 = AD1889_READL(dev, AD_DMAWAVCTRL);
+ tmp32 = AD1889_READL(dev, AD_DMA_WAVCTRL);
tmp32 &= ~0xff; /* flat dma, no sg, mask out the intr bits */
tmp32 |= 0x6; /* intr on count, loop */
- AD1889_WRITEL(dev, AD_DMAWAVCTRL, tmp32);
+ AD1889_WRITEL(dev, AD_DMA_WAVCTRL, tmp32);
/* unmute... */
- tmp16 = AD1889_READW(dev, AD_DSWADA);
+ tmp16 = AD1889_READW(dev, AD_DS_WADA);
tmp16 &= ~0x8080;
- AD1889_WRITEW(dev, AD_DSWADA, tmp16);
+ AD1889_WRITEW(dev, AD_DS_WADA, tmp16);
}
static int __devinit ad1889_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
@@ -1005,7 +1005,7 @@ static int __devinit ad1889_probe(struct pci_dev *pcidev, const struct pci_devic
goto out1;
}
- dev->regbase = ioremap_nocache(bar, AD_DSIOMEMSIZE);
+ dev->regbase = ioremap_nocache(bar, AD_DS_IOMEMSIZE);
if (!dev->regbase) {
printk(KERN_ERR DEVNAME ": unable to remap iomem\n");
goto out2;
diff --git a/sound/oss/ad1889.h b/sound/oss/ad1889.h
index 861b3213f30..09913765967 100644
--- a/sound/oss/ad1889.h
+++ b/sound/oss/ad1889.h
@@ -1,57 +1,58 @@
#ifndef _AD1889_H_
#define _AD1889_H_
-#define AD_DSWSMC 0x00 /* DMA input wave/syn mixer control */
-#define AD_DSRAMC 0x02 /* DMA output resamp/ADC mixer control */
-#define AD_DSWADA 0x04 /* DMA input wave attenuation */
-#define AD_DSSYDA 0x06 /* DMA input syn attentuation */
-#define AD_DSWAS 0x08 /* wave input sample rate */
-#define AD_DSRES 0x0a /* resampler output sample rate */
-#define AD_DSCCS 0x0c /* chip control/status */
-
-#define AD_DMARESBA 0x40 /* RES base addr */
-#define AD_DMARESCA 0x44 /* RES current addr */
-#define AD_DMARESBC 0x48 /* RES base cnt */
-#define AD_DMARESCC 0x4c /* RES current count */
-#define AD_DMAADCBA 0x50 /* ADC */
-#define AD_DMAADCCA 0x54
-#define AD_DMAADCBC 0x58
-#define AD_DMAADCCC 0x5c
-#define AD_DMASYNBA 0x60 /* SYN */
-#define AD_DMASYNCA 0x64
-#define AD_DMASYNBC 0x68
-#define AD_DMASYNCC 0x6c
-#define AD_DMAWAVBA 0x70 /* WAV */
-#define AD_DMAWAVCA 0x74
-#define AD_DMAWAVBC 0x78
-#define AD_DMAWAVCC 0x7c
-#define AD_DMARESICC 0x80 /* RES interrupt current count */
-#define AD_DMARESIBC 0x84 /* RES interrupt base count */
-#define AD_DMAADCICC 0x88 /* ADC interrupt current count */
-#define AD_DMAADCIBC 0x8c /* ADC interrupt base count */
-#define AD_DMASYNICC 0x90 /* SYN interrupt current count */
-#define AD_DMASYNIBC 0x94 /* SYN interrupt base count */
-#define AD_DMAWAVICC 0x98 /* WAV interrupt current count */
-#define AD_DMAWAVIBC 0x9c /* WAV interrupt base count */
-#define AD_DMARESCTRL 0xa0 /* RES PCI control/status */
-#define AD_DMAADCCTRL 0xa8 /* ADC PCI control/status */
-#define AD_DMASYNCTRL 0xb0 /* SYN PCI control/status */
-#define AD_DMAWAVCTRL 0xb8 /* WAV PCI control/status */
-#define AD_DMADISR 0xc0 /* PCI DMA intr status */
-#define AD_DMACHSS 0xc4 /* PCI DMA channel stop status */
-
-#define AD_GPIOIPC 0xc8 /* IO port ctrl */
-#define AD_GPIOOP 0xca /* IO output status */
-#define AD_GPIOIP 0xcc /* IO input status */
+#define AD_DS_WSMC 0x00 /* DMA input wave/syn mixer control */
+#define AD_DS_RAMC 0x02 /* DMA output resamp/ADC mixer control */
+#define AD_DS_WADA 0x04 /* DMA input wave attenuation */
+#define AD_DS_SYDA 0x06 /* DMA input syn attentuation */
+#define AD_DS_WAS 0x08 /* wave input sample rate */
+#define AD_DS_RES 0x0a /* resampler output sample rate */
+#define AD_DS_CCS 0x0c /* chip control/status */
+
+#define AD_DMA_RESBA 0x40 /* RES base addr */
+#define AD_DMA_RESCA 0x44 /* RES current addr */
+#define AD_DMA_RESBC 0x48 /* RES base cnt */
+#define AD_DMA_RESCC 0x4c /* RES current count */
+#define AD_DMA_ADCBA 0x50 /* ADC */
+#define AD_DMA_ADCCA 0x54
+#define AD_DMA_ADCBC 0x58
+#define AD_DMA_ADCCC 0x5c
+#define AD_DMA_SYNBA 0x60 /* SYN */
+#define AD_DMA_SYNCA 0x64
+#define AD_DMA_SYNBC 0x68
+#define AD_DMA_SYNCC 0x6c
+#define AD_DMA_WAVBA 0x70 /* WAV */
+#define AD_DMA_WAVCA 0x74
+#define AD_DMA_WAVBC 0x78
+#define AD_DMA_WAVCC 0x7c
+#define AD_DMA_RESICC 0x80 /* RES interrupt current count */
+#define AD_DMA_RESIBC 0x84 /* RES interrupt base count */
+#define AD_DMA_ADCICC 0x88 /* ADC interrupt current count */
+#define AD_DMA_ADCIBC 0x8c /* ADC interrupt base count */
+#define AD_DMA_SYNICC 0x90 /* SYN interrupt current count */
+#define AD_DMA_SYNIBC 0x94 /* SYN interrupt base count */
+#define AD_DMA_WAVICC 0x98 /* WAV interrupt current count */
+#define AD_DMA_WAVIBC 0x9c /* WAV interrupt base count */
+#define AD_DMA_RESCTRL 0xa0 /* RES PCI control/status */
+#define AD_DMA_ADCCTRL 0xa8 /* ADC PCI control/status */
+#define AD_DMA_SYNCTRL 0xb0 /* SYN PCI control/status */
+#define AD_DMA_WAVCTRL 0xb8 /* WAV PCI control/status */
+#define AD_DMA_DISR 0xc0 /* PCI DMA intr status */
+#define AD_DMA_CHSS 0xc4 /* PCI DMA channel stop status */
+
+#define AD_GPIO_IPC 0xc8 /* IO port ctrl */
+#define AD_GPIO_OP 0xca /* IO output status */
+#define AD_GPIO_IP 0xcc /* IO input status */
/* AC97 registers, 0x100 - 0x17f; see ac97.h */
-#define AD_ACIC 0x180 /* AC Link interface ctrl */
+#define AD_AC97_BASE 0x100 /* ac97 base register */
+#define AD_AC97_ACIC 0x180 /* AC Link interface ctrl */
/* OPL3; BAR1 */
-#define AD_OPLM0AS 0x00 /* Music0 address/status */
-#define AD_OPLM0DATA 0x01 /* Music0 data */
-#define AD_OPLM1A 0x02 /* Music1 address */
-#define AD_OPLM1DATA 0x03 /* Music1 data */
+#define AD_OPL_M0AS 0x00 /* Music0 address/status */
+#define AD_OPL_M0DATA 0x01 /* Music0 data */
+#define AD_OPL_M1A 0x02 /* Music1 address */
+#define AD_OPL_M1DATA 0x03 /* Music1 data */
/* 0x04-0x0f reserved */
/* MIDI; BAR2 */
@@ -59,9 +60,9 @@
#define AD_MISC 0x01 /* MIDI status/cmd */
/* 0x02-0xff reserved */
-#define AD_DSIOMEMSIZE 512
-#define AD_OPLMEMSIZE 16
-#define AD_MIDIMEMSIZE 16
+#define AD_DS_IOMEMSIZE 512
+#define AD_OPL_MEMSIZE 16
+#define AD_MIDI_MEMSIZE 16
#define AD_WAV_STATE 0
#define AD_ADC_STATE 1
diff --git a/sound/oss/dmasound/tas_common.c b/sound/oss/dmasound/tas_common.c
index 81315996c0f..882ae98a41b 100644
--- a/sound/oss/dmasound/tas_common.c
+++ b/sound/oss/dmasound/tas_common.c
@@ -195,8 +195,8 @@ tas_init(int driver_id, const char *driver_name)
printk(KERN_INFO "tas driver [%s])\n", driver_name);
-#ifndef CONFIG_I2C_KEYWEST
- request_module("i2c-keywest");
+#ifndef CONFIG_I2C_POWERMAC
+ request_module("i2c-powermac");
#endif
tas_node = find_devices("deq");
if (tas_node == NULL)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-18 17:52:44 +0000