diff options
Diffstat (limited to 'sound/pci/ac97/ac97_patch.c')
-rw-r--r-- | sound/pci/ac97/ac97_patch.c | 210 |
1 files changed, 206 insertions, 4 deletions
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index f4fbc795ee8..6e831aff1bd 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -476,7 +476,7 @@ static int patch_yamaha_ymf753(struct snd_ac97 * ac97) } /* - * May 2, 2003 Liam Girdwood <liam.girdwood@wolfsonmicro.com> + * May 2, 2003 Liam Girdwood <lrg@slimlogic.co.uk> * removed broken wolfson00 patch. * added support for WM9705,WM9708,WM9709,WM9710,WM9711,WM9712 and WM9717. */ @@ -2560,6 +2560,14 @@ static int patch_ad1986(struct snd_ac97 * ac97) return 0; } +/* + * realtek ALC203: use mono-out for pin 37 + */ +static int patch_alc203(struct snd_ac97 *ac97) +{ + snd_ac97_update_bits(ac97, 0x7a, 0x400, 0x400); + return 0; +} /* * realtek ALC65x/850 codecs @@ -3457,7 +3465,7 @@ static int patch_vt1616(struct snd_ac97 * ac97) /* * unfortunately, the vt1617a stashes the twiddlers required for - * nooding the i/o jacks on 2 different regs. * thameans that we cant + * noodling the i/o jacks on 2 different regs. that means that we can't * use the easy way provided by AC97_ENUM_DOUBLE() we have to write * are own funcs. * @@ -3490,7 +3498,7 @@ static int snd_ac97_vt1617a_smart51_get(struct snd_kcontrol *kcontrol, pac97 = snd_kcontrol_chip(kcontrol); /* grab codec handle */ - /* grab our desirec bits, then mash them together in a manner + /* grab our desired bits, then mash them together in a manner * consistent with Table 6 on page 17 in the 1617a docs */ usSM51 = snd_ac97_read(pac97, 0x7a) >> 14; @@ -3540,7 +3548,7 @@ static const struct snd_kcontrol_new snd_ac97_controls_vt1617a[] = { }, }; -int patch_vt1617a(struct snd_ac97 * ac97) +static int patch_vt1617a(struct snd_ac97 * ac97) { int err = 0; int val; @@ -3568,6 +3576,200 @@ int patch_vt1617a(struct snd_ac97 * ac97) return err; } +/* VIA VT1618 8 CHANNEL AC97 CODEC + * + * VIA implements 'Smart 5.1' completely differently on the 1618 than + * it does on the 1617a. awesome! They seem to have sourced this + * particular revision of the technology from somebody else, it's + * called Universal Audio Jack and it shows up on some other folk's chips + * as well. + * + * ordering in this list reflects vt1618 docs for Reg 60h and + * the block diagram, DACs are as follows: + * + * OUT_O -> Front, + * OUT_1 -> Surround, + * OUT_2 -> C/LFE + * + * Unlike the 1617a, each OUT has a consistent set of mappings + * for all bitpatterns other than 00: + * + * 01 Unmixed Output + * 10 Line In + * 11 Mic In + * + * Special Case of 00: + * + * OUT_0 Mixed Output + * OUT_1 Reserved + * OUT_2 Reserved + * + * I have no idea what the hell Reserved does, but on an MSI + * CN700T, i have to set it to get 5.1 output - YMMV, bad + * shit may happen. + * + * If other chips use Universal Audio Jack, then this code might be applicable + * to them. + */ + +struct vt1618_uaj_item { + unsigned short mask; + unsigned short shift; + const char *items[4]; +}; + +/* This list reflects the vt1618 docs for Vendor Defined Register 0x60. */ + +static struct vt1618_uaj_item vt1618_uaj[3] = { + { + /* speaker jack */ + .mask = 0x03, + .shift = 0, + .items = { + "Speaker Out", "DAC Unmixed Out", "Line In", "Mic In" + } + }, + { + /* line jack */ + .mask = 0x0c, + .shift = 2, + .items = { + "Surround Out", "DAC Unmixed Out", "Line In", "Mic In" + } + }, + { + /* mic jack */ + .mask = 0x30, + .shift = 4, + .items = { + "Center LFE Out", "DAC Unmixed Out", "Line In", "Mic In" + }, + }, +}; + +static int snd_ac97_vt1618_UAJ_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + return ac97_enum_text_info(kcontrol, uinfo, + vt1618_uaj[kcontrol->private_value].items, + 4); +} + +/* All of the vt1618 Universal Audio Jack twiddlers are on + * Vendor Defined Register 0x60, page 0. The bits, and thus + * the mask, are the only thing that changes + */ +static int snd_ac97_vt1618_UAJ_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + unsigned short datpag, uaj; + struct snd_ac97 *pac97 = snd_kcontrol_chip(kcontrol); + + mutex_lock(&pac97->page_mutex); + + datpag = snd_ac97_read(pac97, AC97_INT_PAGING) & AC97_PAGE_MASK; + snd_ac97_update_bits(pac97, AC97_INT_PAGING, AC97_PAGE_MASK, 0); + + uaj = snd_ac97_read(pac97, 0x60) & + vt1618_uaj[kcontrol->private_value].mask; + + snd_ac97_update_bits(pac97, AC97_INT_PAGING, AC97_PAGE_MASK, datpag); + mutex_unlock(&pac97->page_mutex); + + ucontrol->value.enumerated.item[0] = uaj >> + vt1618_uaj[kcontrol->private_value].shift; + + return 0; +} + +static int snd_ac97_vt1618_UAJ_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + return ac97_update_bits_page(snd_kcontrol_chip(kcontrol), 0x60, + vt1618_uaj[kcontrol->private_value].mask, + ucontrol->value.enumerated.item[0]<< + vt1618_uaj[kcontrol->private_value].shift, + 0); +} + +/* config aux in jack - not found on 3 jack motherboards or soundcards */ + +static int snd_ac97_vt1618_aux_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + static const char *txt_aux[] = {"Aux In", "Back Surr Out"}; + + return ac97_enum_text_info(kcontrol, uinfo, txt_aux, 2); +} + +static int snd_ac97_vt1618_aux_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.enumerated.item[0] = + (snd_ac97_read(snd_kcontrol_chip(kcontrol), 0x5c) & 0x0008)>>3; + return 0; +} + +static int snd_ac97_vt1618_aux_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + /* toggle surround rear dac power */ + + snd_ac97_update_bits(snd_kcontrol_chip(kcontrol), 0x5c, 0x0008, + ucontrol->value.enumerated.item[0] << 3); + + /* toggle aux in surround rear out jack */ + + return snd_ac97_update_bits(snd_kcontrol_chip(kcontrol), 0x76, 0x0008, + ucontrol->value.enumerated.item[0] << 3); +} + +static const struct snd_kcontrol_new snd_ac97_controls_vt1618[] = { + AC97_SINGLE("Exchange Center/LFE", 0x5a, 8, 1, 0), + AC97_SINGLE("DC Offset", 0x5a, 10, 1, 0), + AC97_SINGLE("Soft Mute", 0x5c, 0, 1, 1), + AC97_SINGLE("Headphone Amp", 0x5c, 5, 1, 1), + AC97_DOUBLE("Back Surr Volume", 0x5e, 8, 0, 31, 1), + AC97_SINGLE("Back Surr Switch", 0x5e, 15, 1, 1), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Speaker Jack Mode", + .info = snd_ac97_vt1618_UAJ_info, + .get = snd_ac97_vt1618_UAJ_get, + .put = snd_ac97_vt1618_UAJ_put, + .private_value = 0 + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Line Jack Mode", + .info = snd_ac97_vt1618_UAJ_info, + .get = snd_ac97_vt1618_UAJ_get, + .put = snd_ac97_vt1618_UAJ_put, + .private_value = 1 + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Mic Jack Mode", + .info = snd_ac97_vt1618_UAJ_info, + .get = snd_ac97_vt1618_UAJ_get, + .put = snd_ac97_vt1618_UAJ_put, + .private_value = 2 + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Aux Jack Mode", + .info = snd_ac97_vt1618_aux_info, + .get = snd_ac97_vt1618_aux_get, + .put = snd_ac97_vt1618_aux_put, + } +}; + +static int patch_vt1618(struct snd_ac97 *ac97) +{ + return patch_build_controls(ac97, snd_ac97_controls_vt1618, + ARRAY_SIZE(snd_ac97_controls_vt1618)); +} + /* */ static void it2646_update_jacks(struct snd_ac97 *ac97) |