diff options
Diffstat (limited to 'sound/pci/asihpi/hpi6000.c')
| -rw-r--r-- | sound/pci/asihpi/hpi6000.c | 1838 |
1 files changed, 1838 insertions, 0 deletions
diff --git a/sound/pci/asihpi/hpi6000.c b/sound/pci/asihpi/hpi6000.c new file mode 100644 index 00000000000..12dab5e4892 --- /dev/null +++ b/sound/pci/asihpi/hpi6000.c @@ -0,0 +1,1838 @@ +/****************************************************************************** + + AudioScience HPI driver + Copyright (C) 1997-2010 AudioScience Inc. <support@audioscience.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation; + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + Hardware Programming Interface (HPI) for AudioScience ASI6200 series adapters. + These PCI bus adapters are based on the TI C6711 DSP. + + Exported functions: + void HPI_6000(struct hpi_message *phm, struct hpi_response *phr) + + #defines + HIDE_PCI_ASSERTS to show the PCI asserts + PROFILE_DSP2 get profile data from DSP2 if present (instead of DSP 1) + +(C) Copyright AudioScience Inc. 1998-2003 +*******************************************************************************/ +#define SOURCEFILE_NAME "hpi6000.c" + +#include "hpi_internal.h" +#include "hpimsginit.h" +#include "hpidebug.h" +#include "hpi6000.h" +#include "hpidspcd.h" +#include "hpicmn.h" + +#define HPI_HIF_BASE (0x00000200) /* start of C67xx internal RAM */ +#define HPI_HIF_ADDR(member) \ + (HPI_HIF_BASE + offsetof(struct hpi_hif_6000, member)) +#define HPI_HIF_ERROR_MASK 0x4000 + +/* HPI6000 specific error codes */ + +#define HPI6000_ERROR_BASE 900 +#define HPI6000_ERROR_MSG_RESP_IDLE_TIMEOUT 901 +#define HPI6000_ERROR_MSG_RESP_SEND_MSG_ACK 902 +#define HPI6000_ERROR_MSG_RESP_GET_RESP_ACK 903 +#define HPI6000_ERROR_MSG_GET_ADR 904 +#define HPI6000_ERROR_RESP_GET_ADR 905 +#define HPI6000_ERROR_MSG_RESP_BLOCKWRITE32 906 +#define HPI6000_ERROR_MSG_RESP_BLOCKREAD32 907 +#define HPI6000_ERROR_MSG_INVALID_DSP_INDEX 908 +#define HPI6000_ERROR_CONTROL_CACHE_PARAMS 909 + +#define HPI6000_ERROR_SEND_DATA_IDLE_TIMEOUT 911 +#define HPI6000_ERROR_SEND_DATA_ACK 912 +#define HPI6000_ERROR_SEND_DATA_ADR 913 +#define HPI6000_ERROR_SEND_DATA_TIMEOUT 914 +#define HPI6000_ERROR_SEND_DATA_CMD 915 +#define HPI6000_ERROR_SEND_DATA_WRITE 916 +#define HPI6000_ERROR_SEND_DATA_IDLECMD 917 +#define HPI6000_ERROR_SEND_DATA_VERIFY 918 + +#define HPI6000_ERROR_GET_DATA_IDLE_TIMEOUT 921 +#define HPI6000_ERROR_GET_DATA_ACK 922 +#define HPI6000_ERROR_GET_DATA_CMD 923 +#define HPI6000_ERROR_GET_DATA_READ 924 +#define HPI6000_ERROR_GET_DATA_IDLECMD 925 + +#define HPI6000_ERROR_CONTROL_CACHE_ADDRLEN 951 +#define HPI6000_ERROR_CONTROL_CACHE_READ 952 +#define HPI6000_ERROR_CONTROL_CACHE_FLUSH 953 + +#define HPI6000_ERROR_MSG_RESP_GETRESPCMD 961 +#define HPI6000_ERROR_MSG_RESP_IDLECMD 962 +#define HPI6000_ERROR_MSG_RESP_BLOCKVERIFY32 963 + +/* adapter init errors */ +#define HPI6000_ERROR_UNHANDLED_SUBSYS_ID 930 + +/* can't access PCI2040 */ +#define HPI6000_ERROR_INIT_PCI2040 931 +/* can't access DSP HPI i/f */ +#define HPI6000_ERROR_INIT_DSPHPI 932 +/* can't access internal DSP memory */ +#define HPI6000_ERROR_INIT_DSPINTMEM 933 +/* can't access SDRAM - test#1 */ +#define HPI6000_ERROR_INIT_SDRAM1 934 +/* can't access SDRAM - test#2 */ +#define HPI6000_ERROR_INIT_SDRAM2 935 + +#define HPI6000_ERROR_INIT_VERIFY 938 + +#define HPI6000_ERROR_INIT_NOACK 939 + +#define HPI6000_ERROR_INIT_PLDTEST1 941 +#define HPI6000_ERROR_INIT_PLDTEST2 942 + +/* local defines */ + +#define HIDE_PCI_ASSERTS +#define PROFILE_DSP2 + +/* for PCI2040 i/f chip */ +/* HPI CSR registers */ +/* word offsets from CSR base */ +/* use when io addresses defined as u32 * */ + +#define INTERRUPT_EVENT_SET 0 +#define INTERRUPT_EVENT_CLEAR 1 +#define INTERRUPT_MASK_SET 2 +#define INTERRUPT_MASK_CLEAR 3 +#define HPI_ERROR_REPORT 4 +#define HPI_RESET 5 +#define HPI_DATA_WIDTH 6 + +#define MAX_DSPS 2 +/* HPI registers, spaced 8K bytes = 2K words apart */ +#define DSP_SPACING 0x800 + +#define CONTROL 0x0000 +#define ADDRESS 0x0200 +#define DATA_AUTOINC 0x0400 +#define DATA 0x0600 + +#define TIMEOUT 500000 + +struct dsp_obj { + __iomem u32 *prHPI_control; + __iomem u32 *prHPI_address; + __iomem u32 *prHPI_data; + __iomem u32 *prHPI_data_auto_inc; + char c_dsp_rev; /*A, B */ + u32 control_cache_address_on_dsp; + u32 control_cache_length_on_dsp; + struct hpi_adapter_obj *pa_parent_adapter; +}; + +struct hpi_hw_obj { + __iomem u32 *dw2040_HPICSR; + __iomem u32 *dw2040_HPIDSP; + + u16 num_dsp; + struct dsp_obj ado[MAX_DSPS]; + + u32 message_buffer_address_on_dsp; + u32 response_buffer_address_on_dsp; + u32 pCI2040HPI_error_count; + + struct hpi_control_cache_single control_cache[HPI_NMIXER_CONTROLS]; + struct hpi_control_cache *p_cache; +}; + +static u16 hpi6000_dsp_block_write32(struct hpi_adapter_obj *pao, + u16 dsp_index, u32 hpi_address, u32 *source, u32 count); +static u16 hpi6000_dsp_block_read32(struct hpi_adapter_obj *pao, + u16 dsp_index, u32 hpi_address, u32 *dest, u32 count); + +static short hpi6000_adapter_boot_load_dsp(struct hpi_adapter_obj *pao, + u32 *pos_error_code); +static short hpi6000_check_PCI2040_error_flag(struct hpi_adapter_obj *pao, + u16 read_or_write); +#define H6READ 1 +#define H6WRITE 0 + +static short hpi6000_update_control_cache(struct hpi_adapter_obj *pao, + struct hpi_message *phm); +static short hpi6000_message_response_sequence(struct hpi_adapter_obj *pao, + u16 dsp_index, struct hpi_message *phm, struct hpi_response *phr); + +static void hw_message(struct hpi_adapter_obj *pao, struct hpi_message *phm, + struct hpi_response *phr); + +static short hpi6000_wait_dsp_ack(struct hpi_adapter_obj *pao, u16 dsp_index, + u32 ack_value); + +static short hpi6000_send_host_command(struct hpi_adapter_obj *pao, + u16 dsp_index, u32 host_cmd); + +static void hpi6000_send_dsp_interrupt(struct dsp_obj *pdo); + +static short hpi6000_send_data(struct hpi_adapter_obj *pao, u16 dsp_index, + struct hpi_message *phm, struct hpi_response *phr); + +static short hpi6000_get_data(struct hpi_adapter_obj *pao, u16 dsp_index, + struct hpi_message *phm, struct hpi_response *phr); + +static void hpi_write_word(struct dsp_obj *pdo, u32 address, u32 data); + +static u32 hpi_read_word(struct dsp_obj *pdo, u32 address); + +static void hpi_write_block(struct dsp_obj *pdo, u32 address, u32 *pdata, + u32 length); + +static void hpi_read_block(struct dsp_obj *pdo, u32 address, u32 *pdata, + u32 length); + +static void subsys_create_adapter(struct hpi_message *phm, + struct hpi_response *phr); + +static void subsys_delete_adapter(struct hpi_message *phm, + struct hpi_response *phr); + +static void adapter_get_asserts(struct hpi_adapter_obj *pao, + struct hpi_message *phm, struct hpi_response *phr); + +static short create_adapter_obj(struct hpi_adapter_obj *pao, + u32 *pos_error_code); + +/* local globals */ + +static u16 gw_pci_read_asserts; /* used to count PCI2040 errors */ +static u16 gw_pci_write_asserts; /* used to count PCI2040 errors */ + +static void subsys_message(struct hpi_message *phm, struct hpi_response *phr) +{ + + switch (phm->function) { + case HPI_SUBSYS_OPEN: + case HPI_SUBSYS_CLOSE: + case HPI_SUBSYS_GET_INFO: + case HPI_SUBSYS_DRIVER_UNLOAD: + case HPI_SUBSYS_DRIVER_LOAD: + case HPI_SUBSYS_FIND_ADAPTERS: + /* messages that should not get here */ + phr->error = HPI_ERROR_UNIMPLEMENTED; + break; + case HPI_SUBSYS_CREATE_ADAPTER: + subsys_create_adapter(phm, phr); + break; + case HPI_SUBSYS_DELETE_ADAPTER: + subsys_delete_adapter(phm, phr); + break; + default: + phr->error = HPI_ERROR_INVALID_FUNC; + break; + } +} + +static void control_message(struct hpi_adapter_obj *pao, + struct hpi_message *phm, struct hpi_response *phr) +{ + + switch (phm->function) { + case HPI_CONTROL_GET_STATE: + if (pao->has_control_cache) { + u16 err; + err = hpi6000_update_control_cache(pao, phm); + + if (err) { + phr->error = err; + break; + } + + if (hpi_check_control_cache(((struct hpi_hw_obj *) + pao->priv)->p_cache, phm, + phr)) + break; + } + hw_message(pao, phm, phr); + break; + case HPI_CONTROL_GET_INFO: + hw_message(pao, phm, phr); + break; + case HPI_CONTROL_SET_STATE: + hw_message(pao, phm, phr); + hpi_sync_control_cache(((struct hpi_hw_obj *)pao->priv)-> + p_cache, phm, phr); + break; + default: + phr->error = HPI_ERROR_INVALID_FUNC; + break; + } +} + +static void adapter_message(struct hpi_adapter_obj *pao, + struct hpi_message *phm, struct hpi_response *phr) +{ + switch (phm->function) { + case HPI_ADAPTER_GET_INFO: + hw_message(pao, phm, phr); + break; + case HPI_ADAPTER_GET_ASSERT: + adapter_get_asserts(pao, phm, phr); + break; + case HPI_ADAPTER_OPEN: + case HPI_ADAPTER_CLOSE: + case HPI_ADAPTER_TEST_ASSERT: + case HPI_ADAPTER_SELFTEST: + case HPI_ADAPTER_GET_MODE: + case HPI_ADAPTER_SET_MODE: + case HPI_ADAPTER_FIND_OBJECT: + case HPI_ADAPTER_GET_PROPERTY: + case HPI_ADAPTER_SET_PROPERTY: + case HPI_ADAPTER_ENUM_PROPERTY: + hw_message(pao, phm, phr); + break; + default: + phr->error = HPI_ERROR_INVALID_FUNC; + break; + } +} + +static void outstream_message(struct hpi_adapter_obj *pao, + struct hpi_message *phm, struct hpi_response *phr) +{ + switch (phm->function) { + case HPI_OSTREAM_HOSTBUFFER_ALLOC: + case HPI_OSTREAM_HOSTBUFFER_FREE: + /* Don't let these messages go to the HW function because + * they're called without allocating the spinlock. + * For the HPI6000 adapters the HW would return + * HPI_ERROR_INVALID_FUNC anyway. + */ + phr->error = HPI_ERROR_INVALID_FUNC; + break; + default: + hw_message(pao, phm, phr); + return; + } +} + +static void instream_message(struct hpi_adapter_obj *pao, + struct hpi_message *phm, struct hpi_response *phr) +{ + + switch (phm->function) { + case HPI_ISTREAM_HOSTBUFFER_ALLOC: + case HPI_ISTREAM_HOSTBUFFER_FREE: + /* Don't let these messages go to the HW function because + * they're called without allocating the spinlock. + * For the HPI6000 adapters the HW would return + * HPI_ERROR_INVALID_FUNC anyway. + */ + phr->error = HPI_ERROR_INVALID_FUNC; + break; + default: + hw_message(pao, phm, phr); + return; + } +} + +/************************************************************************/ +/** HPI_6000() + * Entry point from HPIMAN + * All calls to the HPI start here + */ +void HPI_6000(struct hpi_message *phm, struct hpi_response *phr) +{ + struct hpi_adapter_obj *pao = NULL; + + /* subsytem messages get executed by every HPI. */ + /* All other messages are ignored unless the adapter index matches */ + /* an adapter in the HPI */ + HPI_DEBUG_LOG(DEBUG, "O %d,F %x\n", phm->object, phm->function); + + /* if Dsp has crashed then do not communicate with it any more */ + if (phm->object != HPI_OBJ_SUBSYSTEM) { + pao = hpi_find_adapter(phm->adapter_index); + if (!pao) { + HPI_DEBUG_LOG(DEBUG, + " %d,%d refused, for another HPI?\n", + phm->object, phm->function); + return; + } + + if (pao->dsp_crashed >= 10) { + hpi_init_response(phr, phm->object, phm->function, + HPI_ERROR_DSP_HARDWARE); + HPI_DEBUG_LOG(DEBUG, " %d,%d dsp crashed.\n", + phm->object, phm->function); + return; + } + } + /* Init default response including the size field */ + if (phm->function != HPI_SUBSYS_CREATE_ADAPTER) + hpi_init_response(phr, phm->object, phm->function, + HPI_ERROR_PROCESSING_MESSAGE); + + switch (phm->type) { + case HPI_TYPE_MESSAGE: + switch (phm->object) { + case HPI_OBJ_SUBSYSTEM: + subsys_message(phm, phr); + break; + + case HPI_OBJ_ADAPTER: + phr->size = + sizeof(struct hpi_response_header) + + sizeof(struct hpi_adapter_res); + adapter_message(pao, phm, phr); + break; + + case HPI_OBJ_CONTROL: + control_message(pao, phm, phr); + break; + + case HPI_OBJ_OSTREAM: + outstream_message(pao, phm, phr); + break; + + case HPI_OBJ_ISTREAM: + instream_message(pao, phm, phr); + break; + + default: + hw_message(pao, phm, phr); + break; + } + break; + + default: + phr->error = HPI_ERROR_INVALID_TYPE; + break; + } +} + +/************************************************************************/ +/* SUBSYSTEM */ + +/* create an adapter object and initialise it based on resource information + * passed in in the message + * NOTE - you cannot use this function AND the FindAdapters function at the + * same time, the application must use only one of them to get the adapters + */ +static void subsys_create_adapter(struct hpi_message *phm, + struct hpi_response *phr) +{ + /* create temp adapter obj, because we don't know what index yet */ + struct hpi_adapter_obj ao; + struct hpi_adapter_obj *pao; + u32 os_error_code; + short error = 0; + u32 dsp_index = 0; + + HPI_DEBUG_LOG(VERBOSE, "subsys_create_adapter\n"); + + memset(&ao, 0, sizeof(ao)); + + /* this HPI only creates adapters for TI/PCI2040 based devices */ + if (phm->u.s.resource.bus_type != HPI_BUS_PCI) + return; + if (phm->u.s.resource.r.pci->vendor_id != HPI_PCI_VENDOR_ID_TI) + return; + if (phm->u.s.resource.r.pci->device_id != HPI_PCI_DEV_ID_PCI2040) + return; + + ao.priv = kzalloc(sizeof(struct hpi_hw_obj), GFP_KERNEL); + if (!ao.priv) { + HPI_DEBUG_LOG(ERROR, "cant get mem for adapter object\n"); + phr->error = HPI_ERROR_MEMORY_ALLOC; + return; + } + + /* create the adapter object based on the resource information */ + /*? memcpy(&ao.Pci,&phm->u.s.Resource.r.Pci,sizeof(ao.Pci)); */ + ao.pci = *phm->u.s.resource.r.pci; + + error = create_adapter_obj(&ao, &os_error_code); + if (!error) + error = hpi_add_adapter(&ao); + if (error) { + phr->u.s.data = os_error_code; + kfree(ao.priv); + phr->error = error; + return; + } + /* need to update paParentAdapter */ + pao = hpi_find_adapter(ao.index); + if (!pao) { + /* We just added this adapter, why can't we find it!? */ + HPI_DEBUG_LOG(ERROR, "lost adapter after boot\n"); + phr->error = 950; + return; + } + + for (dsp_index = 0; dsp_index < MAX_DSPS; dsp_index++) { + struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv; + phw->ado[dsp_index].pa_parent_adapter = pao; + } + + phr->u.s.aw_adapter_list[ao.index] = ao.adapter_type; + phr->u.s.adapter_index = ao.index; + phr->u.s.num_adapters++; + phr->error = 0; +} + +static void subsys_delete_adapter(struct hpi_message *phm, + struct hpi_response *phr) +{ + struct hpi_adapter_obj *pao = NULL; + struct hpi_hw_obj *phw; + + pao = hpi_find_adapter(phm->adapter_index); + if (!pao) + return; + + phw = (struct hpi_hw_obj *)pao->priv; + + if (pao->has_control_cache) + hpi_free_control_cache(phw->p_cache); + + hpi_delete_adapter(pao); + kfree(phw); + + phr->error = 0; +} + +/* this routine is called from SubSysFindAdapter and SubSysCreateAdapter */ +static short create_adapter_obj(struct hpi_adapter_obj *pao, + u32 *pos_error_code) +{ + short boot_error = 0; + u32 dsp_index = 0; + u32 control_cache_size = 0; + u32 control_cache_count = 0; + struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv; + + /* init error reporting */ + pao->dsp_crashed = 0; + + /* The PCI2040 has the following address map */ + /* BAR0 - 4K = HPI control and status registers on PCI2040 (HPI CSR) */ + /* BAR1 - 32K = HPI registers on DSP */ + phw->dw2040_HPICSR = pao->pci.ap_mem_base[0]; + phw->dw2040_HPIDSP = pao->pci.ap_mem_base[1]; + HPI_DEBUG_LOG(VERBOSE, "csr %p, dsp %p\n", phw->dw2040_HPICSR, + phw->dw2040_HPIDSP); + + /* set addresses for the possible DSP HPI interfaces */ + for (dsp_index = 0; dsp_index < MAX_DSPS; dsp_index++) { + phw->ado[dsp_index].prHPI_control = + phw->dw2040_HPIDSP + (CONTROL + + DSP_SPACING * dsp_index); + + phw->ado[dsp_index].prHPI_address = + phw->dw2040_HPIDSP + (ADDRESS + + DSP_SPACING * dsp_index); + phw->ado[dsp_index].prHPI_data = + phw->dw2040_HPIDSP + (DATA + DSP_SPACING * dsp_index); + + phw->ado[dsp_index].prHPI_data_auto_inc = + phw->dw2040_HPIDSP + (DATA_AUTOINC + + DSP_SPACING * dsp_index); + + HPI_DEBUG_LOG(VERBOSE, "ctl %p, adr %p, dat %p, dat++ %p\n", + phw->ado[dsp_index].prHPI_control, + phw->ado[dsp_index].prHPI_address, + phw->ado[dsp_index].prHPI_data, + phw->ado[dsp_index].prHPI_data_auto_inc); + + phw->ado[dsp_index].pa_parent_adapter = pao; + } + + phw->pCI2040HPI_error_count = 0; + pao->has_control_cache = 0; + + /* Set the default number of DSPs on this card */ + /* This is (conditionally) adjusted after bootloading */ + /* of the first DSP in the bootload section. */ + phw->num_dsp = 1; + + boot_error = hpi6000_adapter_boot_load_dsp(pao, pos_error_code); + if (boot_error) + return boot_error; + + HPI_DEBUG_LOG(INFO, "bootload DSP OK\n"); + + phw->message_buffer_address_on_dsp = 0L; + phw->response_buffer_address_on_dsp = 0L; + + /* get info about the adapter by asking the adapter */ + /* send a HPI_ADAPTER_GET_INFO message */ + { + struct hpi_message hM; + struct hpi_response hR0; /* response from DSP 0 */ + struct hpi_response hR1; /* response from DSP 1 */ + u16 error = 0; + + HPI_DEBUG_LOG(VERBOSE, "send ADAPTER_GET_INFO\n"); + memset(&hM, 0, sizeof(hM)); + hM.type = HPI_TYPE_MESSAGE; + hM.size = sizeof(struct hpi_message); + hM.object = HPI_OBJ_ADAPTER; + hM.function = HPI_ADAPTER_GET_INFO; + hM.adapter_index = 0; + memset(&hR0, 0, sizeof(hR0)); + memset(&hR1, 0, sizeof(hR1)); + hR0.size = sizeof(hR0); + hR1.size = sizeof(hR1); + + error = hpi6000_message_response_sequence(pao, 0, &hM, &hR0); + if (hR0.error) { + HPI_DEBUG_LOG(DEBUG, "message error %d\n", hR0.error); + return hR0.error; + } + if (phw->num_dsp == 2) { + error = hpi6000_message_response_sequence(pao, 1, &hM, + &hR1); + if (error) + return error; + } + pao->adapter_type = hR0.u.a.adapter_type; + pao->index = hR0.u.a.adapter_index; + } + + memset(&phw->control_cache[0], 0, + sizeof(struct hpi_control_cache_single) * + HPI_NMIXER_CONTROLS); + /* Read the control cache length to figure out if it is turned on */ + control_cache_size = + hpi_read_word(&phw->ado[0], + HPI_HIF_ADDR(control_cache_size_in_bytes)); + if (control_cache_size) { + control_cache_count = + hpi_read_word(&phw->ado[0], + HPI_HIF_ADDR(control_cache_count)); + pao->has_control_cache = 1; + + phw->p_cache = + hpi_alloc_control_cache(control_cache_count, + control_cache_size, (struct hpi_control_cache_info *) + &phw->control_cache[0] + ); + } else + pao->has_control_cache = 0; + + HPI_DEBUG_LOG(DEBUG, "get adapter info ASI%04X index %d\n", + pao->adapter_type, pao->index); + pao->open = 0; /* upon creation the adapter is closed */ + return 0; +} + +/************************************************************************/ +/* ADAPTER */ + +static void adapter_get_asserts(struct hpi_adapter_obj *pao, + struct hpi_message *phm, struct hpi_response *phr) +{ +#ifndef HIDE_PCI_ASSERTS + /* if we have PCI2040 asserts then collect them */ + if ((gw_pci_read_asserts > 0) || (gw_pci_write_asserts > 0)) { + phr->u.a.serial_number = + gw_pci_read_asserts * 100 + gw_pci_write_asserts; + phr->u.a.adapter_index = 1; /* assert count */ + phr->u.a.adapter_type = -1; /* "dsp index" */ + strcpy(phr->u.a.sz_adapter_assert, "PCI2040 error"); + gw_pci_read_asserts = 0; + gw_pci_write_asserts = 0; + phr->error = 0; + } else +#endif + hw_message(pao, phm, phr); /*get DSP asserts */ + + return; +} + +/************************************************************************/ +/* LOW-LEVEL */ + +static short hpi6000_adapter_boot_load_dsp(struct hpi_adapter_obj *pao, + u32 *pos_error_code) +{ + struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv; + short error; + u32 timeout; + u32 read = 0; + u32 i = 0; + u32 data = 0; + u32 j = 0; + u32 test_addr = 0x80000000; + u32 test_data = 0x00000001; + u32 dw2040_reset = 0; + u32 dsp_index = 0; + u32 endian = 0; + u32 adapter_info = 0; + u32 delay = 0; + + struct dsp_code dsp_code; + u16 boot_load_family = 0; + + /* NOTE don't use wAdapterType in this routine. It is not setup yet */ + + switch (pao->pci.subsys_device_id) { + case 0x5100: + case 0x5110: /* ASI5100 revB or higher with C6711D */ + case 0x6100: + case 0x6200: + boot_load_family = HPI_ADAPTER_FAMILY_ASI(0x6200); + break; + default: + return HPI6000_ERROR_UNHANDLED_SUBSYS_ID; + } + + /* reset all DSPs, indicate two DSPs are present + * set RST3-=1 to disconnect HAD8 to set DSP in little endian mode + */ + endian = 0; + dw2040_reset = 0x0003000F; + iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET); + + /* read back register to make sure PCI2040 chip is functioning + * note that bits 4..15 are read-only and so should always return zero, + * even though we wrote 1 to them + */ + for (i = 0; i < 1000; i++) + delay = ioread32(phw->dw2040_HPICSR + HPI_RESET); + if (delay != dw2040_reset) { + HPI_DEBUG_LOG(ERROR, "INIT_PCI2040 %x %x\n", dw2040_reset, + delay); + return HPI6000_ERROR_INIT_PCI2040; + } + + /* Indicate that DSP#0,1 is a C6X */ + iowrite32(0x00000003, phw->dw2040_HPICSR + HPI_DATA_WIDTH); + /* set Bit30 and 29 - which will prevent Target aborts from being + * issued upon HPI or GP error + */ + iowrite32(0x60000000, phw->dw2040_HPICSR + INTERRUPT_MASK_SET); + + /* isolate DSP HAD8 line from PCI2040 so that + * Little endian can be set by pullup + */ + dw2040_reset = dw2040_reset & (~(endian << 3)); + iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET); + + phw->ado[0].c_dsp_rev = 'B'; /* revB */ + phw->ado[1].c_dsp_rev = 'B'; /* revB */ + + /*Take both DSPs out of reset, setting HAD8 to the correct Endian */ + dw2040_reset = dw2040_reset & (~0x00000001); /* start DSP 0 */ + iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET); + dw2040_reset = dw2040_reset & (~0x00000002); /* start DSP 1 */ + iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET); + + /* set HAD8 back to PCI2040, now that DSP set to little endian mode */ + dw2040_reset = dw2040_reset & (~0x00000008); + iowrite32(dw2040_reset, phw->dw2040_HPICSR + HPI_RESET); + /*delay to allow DSP to get going */ + for (i = 0; i < 100; i++) + delay = ioread32(phw->dw2040_HPICSR + HPI_RESET); + + /* loop through all DSPs, downloading DSP code */ + for (dsp_index = 0; dsp_index < phw->num_dsp; dsp_index++) { + struct dsp_obj *pdo = &phw->ado[dsp_index]; + + /* configure DSP so that we download code into the SRAM */ + /* set control reg for little endian, HWOB=1 */ + iowrite32(0x00010001, pdo->prHPI_control); + + /* test access to the HPI address register (HPIA) */ + test_data = 0x00000001; + for (j = 0; j < 32; j++) { + iowrite32(test_data, pdo->prHPI_address); + data = ioread32(pdo->prHPI_address); + if (data != test_data) { + HPI_DEBUG_LOG(ERROR, "INIT_DSPHPI %x %x %x\n", + test_data, data, dsp_index); + return HPI6000_ERROR_INIT_DSPHPI; + } + test_data = test_data << 1; + } + +/* if C6713 the setup PLL to generate 225MHz from 25MHz. +* Since the PLLDIV1 read is sometimes wrong, even on a C6713, +* we're going to do this unconditionally +*/ +/* PLLDIV1 should have a value of 8000 after reset */ +/* + if (HpiReadWord(pdo,0x01B7C118) == 0x8000) +*/ + { + /* C6713 datasheet says we cannot program PLL from HPI, + * and indeed if we try to set the PLL multiply from the + * HPI, the PLL does not seem to lock, + * so we enable the PLL and use the default of x 7 + */ + /* bypass PLL */ + hpi_write_word(pdo, 0x01B7C100, 0x0000); + for (i = 0; i < 100; i++) + delay = ioread32(phw->dw2040_HPICSR + + HPI_RESET); + + /* ** use default of PLL x7 ** */ + /* EMIF = 225/3=75MHz */ + hpi_write_word(pdo, 0x01B7C120, 0x8002); + /* peri = 225/2 */ + hpi_write_word(pdo, 0x01B7C11C, 0x8001); + /* cpu = 225/1 */ + hpi_write_word(pdo, 0x01B7C118, 0x8000); + /* ~200us delay */ + for (i = 0; i < 2000; i++) + delay = ioread32(phw->dw2040_HPICSR + + HPI_RESET); + /* PLL not bypassed */ + hpi_write_word(pdo, 0x01B7C100, 0x0001); + /* ~200us delay */ + for (i = 0; i < 2000; i++) + delay = ioread32(phw->dw2040_HPICSR + + HPI_RESET); + } + + /* test r/w to internal DSP memory + * C6711 has L2 cache mapped to 0x0 when reset + * + * revB - because of bug 3.0.1 last HPI read + * (before HPI address issued) must be non-autoinc + */ + /* test each bit in the 32bit word */ + for (i = 0; i < 100; i++) { + test_addr = 0x00000000; + test_data = 0x00000001; + for (j = 0; j < 32; j++) { + hpi_write_word(pdo, test_addr + i, test_data); + data = hpi_read_word(pdo, test_addr + i); + if (data != test_data) { + HPI_DEBUG_LOG(ERROR, + "DSP mem %x %x %x %x\n", + test_addr + i, test_data, + data, dsp_index); + + return HPI6000_ERROR_INIT_DSPINTMEM; + } + test_data = test_data << 1; + } + } + + /* memory map of ASI6200 + 00000000-0000FFFF 16Kx32 internal program + 01800000-019FFFFF Internal peripheral + 80000000-807FFFFF CE0 2Mx32 SDRAM running @ 100MHz + 90000000-9000FFFF CE1 Async peripherals: + + EMIF config + ------------ + Global EMIF control + 0 - + 1 - + 2 - + 3 CLK2EN = 1 CLKOUT2 enabled + 4 CLK1EN = 0 CLKOUT1 disabled + 5 EKEN = 1 <--!! C6713 specific, enables ECLKOUT + 6 - + 7 NOHOLD = 1 external HOLD disabled + 8 HOLDA = 0 HOLDA output is low + 9 HOLD = 0 HOLD input is low + 10 ARDY = 1 ARDY input is high + 11 BUSREQ = 0 BUSREQ output is low + 12,13 Reserved = 1 + */ + hpi_write_word(pdo, 0x01800000, 0x34A8); + + /* EMIF CE0 setup - 2Mx32 Sync DRAM + 31..28 Wr setup + 27..22 Wr strobe + 21..20 Wr hold + 19..16 Rd setup + 15..14 - + 13..8 Rd strobe + 7..4 MTYPE 0011 Sync DRAM 32bits + 3 Wr hold MSB + 2..0 Rd hold + */ + hpi_write_word(pdo, 0x01800008, 0x00000030); + + /* EMIF SDRAM Extension + 31-21 0 + 20 WR2RD = 0 + 19-18 WR2DEAC = 1 + 17 WR2WR = 0 + 16-15 R2WDQM = 2 + 14-12 RD2WR = 4 + 11-10 RD2DEAC = 1 + 9 RD2RD = 1 + 8-7 THZP = 10b + 6-5 TWR = 2-1 = 01b (tWR = 10ns) + 4 TRRD = 0b = 2 ECLK (tRRD = 14ns) + 3-1 TRAS = 5-1 = 100b (Tras=42ns = 5 ECLK) + 1 CAS latency = 3 ECLK + (for Micron 2M32-7 operating at 100Mhz) + */ + + /* need to use this else DSP code crashes */ + hpi_write_word(pdo, 0x01800020, 0x001BDF29); + + /* EMIF SDRAM control - set up for a 2Mx32 SDRAM (512x32x4 bank) + 31 - - + 30 SDBSZ 1 4 bank + 29..28 SDRSZ 00 11 row address pins + 27..26 SDCSZ 01 8 column address pins + 25 RFEN 1 refersh enabled + 24 INIT 1 init SDRAM + 23..20 TRCD 0001 + 19..16 TRP 0001 + 15..12 TRC 0110 + 11..0 - - + */ + /* need to use this else DSP code crashes */ + hpi_write_word(pdo, 0x01800018, 0x47117000); + + /* EMIF SDRAM Refresh Timing */ + hpi_write_word(pdo, 0x0180001C, 0x00000410); + + /*MIF CE1 setup - Async peripherals + @100MHz bus speed, each cycle is 10ns, + 31..28 Wr setup = 1 + 27..22 Wr strobe = 3 30ns + 21..20 Wr hold = 1 + 19..16 Rd setup =1 + 15..14 Ta = 2 + 13..8 Rd strobe = 3 30ns + 7..4 MTYPE 0010 Async 32bits + 3 Wr hold MSB =0 + 2..0 Rd hold = 1 + */ + { + u32 cE1 = + (1L << 28) | (3L << 22) | (1L << 20) | (1L << + 16) | (2L << 14) | (3L << 8) | (2L << 4) | 1L; + hpi_write_word(pdo, 0x01800004, cE1); + } + + /* delay a little to allow SDRAM and DSP to "get going" */ + + for (i = 0; i < 1000; i++) + delay = ioread32(phw->dw2040_HPICSR + HPI_RESET); + + /* test access to SDRAM */ + { + test_addr = 0x80000000; + test_data = 0x00000001; + /* test each bit in the 32bit word */ + for (j = 0; j < 32; j++) { + hpi_write_word(pdo, test_addr, test_data); + data = hpi_read_word(pdo, test_addr); + if (data != test_data) { + HPI_DEBUG_LOG(ERROR, + "DSP dram %x %x %x %x\n", + test_addr, test_data, data, + dsp_index); + + return HPI6000_ERROR_INIT_SDRAM1; + } + test_data = test_data << 1; + } + /* test every Nth address in the DRAM */ +#define DRAM_SIZE_WORDS 0x200000 /*2_mx32 */ +#define DRAM_INC 1024 + test_addr = 0x80000000; + test_data = 0x0; + for (i = 0; i < DRAM_SIZE_WORDS; i = i + DRAM_INC) { + hpi_write_word(pdo, test_addr + i, test_data); + test_data++; + } + test_addr = 0x80000000; + test_data = 0x0; + for (i = 0; i < DRAM_SIZE_WORDS; i = i + DRAM_INC) { + data = hpi_read_word(pdo, test_addr + i); + if (data != test_data) { + HPI_DEBUG_LOG(ERROR, + "DSP dram %x %x %x %x\n", + test_addr + i, test_data, + data, dsp_index); + return HPI6000_ERROR_INIT_SDRAM2; + } + test_data++; + } + + } + + /* write the DSP code down into the DSPs memory */ + /*HpiDspCode_Open(nBootLoadFamily,&DspCode,pdwOsErrorCode); */ + dsp_code.ps_dev = pao->pci.p_os_data; + + error = hpi_dsp_code_open(boot_load_family, &dsp_code, + pos_error_code); + + if (error) + return error; + + while (1) { + u32 length; + u32 address; + u32 type; + u32 *pcode; + + error = hpi_dsp_code_read_word(&dsp_code, &length); + if (error) + break; + if (length == 0xFFFFFFFF) + break; /* end of code */ + + error = hpi_dsp_code_read_word(&dsp_code, &address); + if (error) + break; + error = hpi_dsp_code_read_word(&dsp_code, &type); + if (error) + break; + error = hpi_dsp_code_read_block(length, &dsp_code, + &pcode); + if (error) + break; + error = hpi6000_dsp_block_write32(pao, (u16)dsp_index, + address, pcode, length); + if (error) + break; + } + + if (error) { + hpi_dsp_code_close(&dsp_code); + return error; + } + /* verify that code was written correctly */ + /* this time through, assume no errors in DSP code file/array */ + hpi_dsp_code_rewind(&dsp_code); + while (1) { + u32 length; + u32 address; + u32 type; + u32 *pcode; + + hpi_dsp_code_read_word(&dsp_code, &length); + if (length == 0xFFFFFFFF) + break; /* end of code */ + + hpi_dsp_code_read_word(&dsp_code, &address); + hpi_dsp_code_read_word(&dsp_code, &type); + hpi_dsp_code_read_block(length, &dsp_code, &pcode); + + for (i = 0; i < length; i++) { + data = hpi_read_word(pdo, address); + if (data != *pcode) { + error = HPI6000_ERROR_INIT_VERIFY; + HPI_DEBUG_LOG(ERROR, + "DSP verify %x %x %x %x\n", + address, *pcode, data, + dsp_index); + break; + } + pcode++; + address += 4; + } + if (error) + break; + } + hpi_dsp_code_close(&dsp_code); + if (error) + return error; + + /* zero out the hostmailbox */ + { + u32 address = HPI_HIF_ADDR(host_cmd); + for (i = 0; i < 4; i++) { + hpi_write_word(pdo, address, 0); + address += 4; + } + } + /* write the DSP number into the hostmailbox */ + /* structure before starting the DSP */ + hpi_write_word(pdo, HPI_HIF_ADDR(dsp_number), dsp_index); + + /* write the DSP adapter Info into the */ + /* hostmailbox before starting the DSP */ + if (dsp_index > 0) + hpi_write_word(pdo, HPI_HIF_ADDR(adapter_info), + adapter_info); + + /* step 3. Start code by sending interrupt */ + iowrite32(0x00030003, pdo->prHPI_control); + for (i = 0; i < 10000; i++) + delay = ioread32(phw->dw2040_HPICSR + HPI_RESET); + + /* wait for a non-zero value in hostcmd - + * indicating initialization is complete + * + * Init could take a while if DSP checks SDRAM memory + * Was 200000. Increased to 2000000 for ASI8801 so we + * don't get 938 errors. + */ + timeout = 2000000; + while (timeout) { + do { + read = hpi_read_word(pdo, + HPI_HIF_ADDR(host_cmd)); + } while (--timeout + && hpi6000_check_PCI2040_error_flag(pao, + H6READ)); + + if (read) + break; + /* The following is a workaround for bug #94: + * Bluescreen on install and subsequent boots on a + * DELL PowerEdge 600SC PC with 1.8GHz P4 and + * ServerWorks chipset. Without this delay the system + * locks up with a bluescreen (NOT GPF or pagefault). + */ + else + hpios_delay_micro_seconds(1000); + } + if (timeout == 0) + return HPI6000_ERROR_INIT_NOACK; + + /* read the DSP adapter Info from the */ + /* hostmailbox structure after starting the DSP */ + if (dsp_index == 0) { + /*u32 dwTestData=0; */ + u32 mask = 0; + + adapter_info = + hpi_read_word(pdo, + HPI_HIF_ADDR(adapter_info)); + if (HPI_ADAPTER_FAMILY_ASI + (HPI_HIF_ADAPTER_INFO_EXTRACT_ADAPTER + (adapter_info)) == + HPI_ADAPTER_FAMILY_ASI(0x6200)) + /* all 6200 cards have this many DSPs */ + phw->num_dsp = 2; + + /* test that the PLD is programmed */ + /* and we can read/write 24bits */ +#define PLD_BASE_ADDRESS 0x90000000L /*for ASI6100/6200/8800 */ + + switch (boot_load_family) { + case HPI_ADAPTER_FAMILY_ASI(0x6200): + /* ASI6100/6200 has 24bit path to FPGA */ + mask = 0xFFFFFF00L; + /* ASI5100 uses AX6 code, */ + /* but has no PLD r/w register to test */ + if (HPI_ADAPTER_FAMILY_ASI(pao->pci. + subsys_device_id) == + HPI_ADAPTER_FAMILY_ASI(0x5100)) + mask = 0x00000000L; + break; + case HPI_ADAPTER_FAMILY_ASI(0x8800): + /* ASI8800 has 16bit path to FPGA */ + mask = 0xFFFF0000L; + break; + } + test_data = 0xAAAAAA00L & mask; + /* write to 24 bit Debug register (D31-D8) */ + hpi_write_word(pdo, PLD_BASE_ADDRESS + 4L, test_data); + read = hpi_read_word(pdo, + PLD_BASE_ADDRESS + 4L) & mask; + if (read != test_data) { + HPI_DEBUG_LOG(ERROR, "PLD %x %x\n", test_data, + read); + return HPI6000_ERROR_INIT_PLDTEST1; + } + test_data = 0x55555500L & mask; + hpi_write_word(pdo, PLD_BASE_ADDRESS + 4L, test_data); + read = hpi_read_word(pdo, + PLD_BASE_ADDRESS + 4L) & mask; + if (read != test_data) { + HPI_DEBUG_LOG(ERROR, "PLD %x %x\n", test_data, + read); + return HPI6000_ERROR_INIT_PLDTEST2; + } + } + } /* for numDSP */ + return 0; +} + +#define PCI_TIMEOUT 100 + +static int hpi_set_address(struct dsp_obj *pdo, u32 address) +{ + u32 timeout = PCI_TIMEOUT; + + do { + iowrite32(address, pdo->prHPI_address); + } while (hpi6000_check_PCI2040_error_flag(pdo->pa_parent_adapter, + H6WRITE) + && --timeout); + + if (timeout) + return 0; + + return 1; +} + +/* write one word to the HPI port */ +static void hpi_write_word(struct dsp_obj *pdo, u32 address, u32 data) +{ + if (hpi_set_address(pdo, address)) + return; + iowrite32(data, pdo->prHPI_data); +} + +/* read one word from the HPI port */ +static u32 hpi_read_word(struct dsp_obj *pdo, u32 address) +{ + u32 data = 0; + + if (hpi_set_address(pdo, address)) + return 0; /*? no way to return error */ + + /* take care of errata in revB DSP (2.0.1) */ + data = ioread32(pdo->prHPI_data); + return data; +} + +/* write a block of 32bit words to the DSP HPI port using auto-inc mode */ +static void hpi_write_block(struct dsp_obj *pdo, u32 address, u32 *pdata, + u32 length) +{ + u16 length16 = length - 1; + + if (length == 0) + return; + + if (hpi_set_address(pdo, address)) + return; + + iowrite32_rep(pdo->prHPI_data_auto_inc, pdata, length16); + + /* take care of errata in revB DSP (2.0.1) */ + /* must end with non auto-inc */ + iowrite32(*(pdata + length - 1), pdo->prHPI_data); +} + +/** read a block of 32bit words from the DSP HPI port using auto-inc mode + */ +static void hpi_read_block(struct dsp_obj *pdo, u32 address, u32 *pdata, + u32 length) +{ + u16 length16 = length - 1; + + if (length == 0) + return; + + if (hpi_set_address(pdo, address)) + return; + + ioread32_rep(pdo->prHPI_data_auto_inc, pdata, length16); + + /* take care of errata in revB DSP (2.0.1) */ + /* must end with non auto-inc */ + *(pdata + length - 1) = ioread32(pdo->prHPI_data); +} + +static u16 hpi6000_dsp_block_write32(struct hpi_adapter_obj *pao, + u16 dsp_index, u32 hpi_address, u32 *source, u32 count) +{ + struct dsp_obj *pdo = + &(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index]; + u32 time_out = PCI_TIMEOUT; + int c6711_burst_size = 128; + u32 local_hpi_address = hpi_address; + int local_count = count; + int xfer_size; + u32 *pdata = source; + + while (local_count) { + if (local_count > c6711_burst_size) + xfer_size = c6711_burst_size; + else + xfer_size = local_count; + + time_out = PCI_TIMEOUT; + do { + hpi_write_block(pdo, local_hpi_address, pdata, + xfer_size); + } while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE) + && --time_out); + + if (!time_out) + break; + pdata += xfer_size; + local_hpi_address += sizeof(u32) * xfer_size; + local_count -= xfer_size; + } + + if (time_out) + return 0; + else + return 1; +} + +static u16 hpi6000_dsp_block_read32(struct hpi_adapter_obj *pao, + u16 dsp_index, u32 hpi_address, u32 *dest, u32 count) +{ + struct dsp_obj *pdo = + &(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index]; + u32 time_out = PCI_TIMEOUT; + int c6711_burst_size = 16; + u32 local_hpi_address = hpi_address; + int local_count = count; + int xfer_size; + u32 *pdata = dest; + u32 loop_count = 0; + + while (local_count) { + if (local_count > c6711_burst_size) + xfer_size = c6711_burst_size; + else + xfer_size = local_count; + + time_out = PCI_TIMEOUT; + do { + hpi_read_block(pdo, local_hpi_address, pdata, + xfer_size); + } while (hpi6000_check_PCI2040_error_flag(pao, H6READ) + && --time_out); + if (!time_out) + break; + + pdata += xfer_size; + local_hpi_address += sizeof(u32) * xfer_size; + local_count -= xfer_size; + loop_count++; + } + + if (time_out) + return 0; + else + return 1; +} + +static short hpi6000_message_response_sequence(struct hpi_adapter_obj *pao, + u16 dsp_index, struct hpi_message *phm, struct hpi_response *phr) +{ + struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv; + struct dsp_obj *pdo = &phw->ado[dsp_index]; + u32 timeout; + u16 ack; + u32 address; + u32 length; + u32 *p_data; + u16 error = 0; + + /* does the DSP we are referencing exist? */ + if (dsp_index >= phw->num_dsp) + return HPI6000_ERROR_MSG_INVALID_DSP_INDEX; + + ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE); + if (ack & HPI_HIF_ERROR_MASK) { + pao->dsp_crashed++; + return HPI6000_ERROR_MSG_RESP_IDLE_TIMEOUT; + } + pao->dsp_crashed = 0; + + /* send the message */ + + /* get the address and size */ + if (phw->message_buffer_address_on_dsp == 0) { + timeout = TIMEOUT; + do { + address = + hpi_read_word(pdo, + HPI_HIF_ADDR(message_buffer_address)); + phw->message_buffer_address_on_dsp = address; + } while (hpi6000_check_PCI2040_error_flag(pao, H6READ) + && --timeout); + if (!timeout) + return HPI6000_ERROR_MSG_GET_ADR; + } else + address = phw->message_buffer_address_on_dsp; + + /* dwLength = sizeof(struct hpi_message); */ + length = phm->size; + + /* send it */ + p_data = (u32 *)phm; + if (hpi6000_dsp_block_write32(pao, dsp_index, address, p_data, + (u16)length / 4)) + return HPI6000_ERROR_MSG_RESP_BLOCKWRITE32; + + if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_GET_RESP)) + return HPI6000_ERROR_MSG_RESP_GETRESPCMD; + hpi6000_send_dsp_interrupt(pdo); + + ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_GET_RESP); + if (ack & HPI_HIF_ERROR_MASK) + return HPI6000_ERROR_MSG_RESP_GET_RESP_ACK; + + /* get the address and size */ + if (phw->response_buffer_address_on_dsp == 0) { + timeout = TIMEOUT; + do { + address = + hpi_read_word(pdo, + HPI_HIF_ADDR(response_buffer_address)); + } while (hpi6000_check_PCI2040_error_flag(pao, H6READ) + && --timeout); + phw->response_buffer_address_on_dsp = address; + + if (!timeout) + return HPI6000_ERROR_RESP_GET_ADR; + } else + address = phw->response_buffer_address_on_dsp; + + /* read the length of the response back from the DSP */ + timeout = TIMEOUT; + do { + length = hpi_read_word(pdo, HPI_HIF_ADDR(length)); + } while (hpi6000_check_PCI2040_error_flag(pao, H6READ) && --timeout); + if (!timeout) + length = sizeof(struct hpi_response); + + /* get it */ + p_data = (u32 *)phr; + if (hpi6000_dsp_block_read32(pao, dsp_index, address, p_data, + (u16)length / 4)) + return HPI6000_ERROR_MSG_RESP_BLOCKREAD32; + + /* set i/f back to idle */ + if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE)) + return HPI6000_ERROR_MSG_RESP_IDLECMD; + hpi6000_send_dsp_interrupt(pdo); + + error = hpi_validate_response(phm, phr); + return error; +} + +/* have to set up the below defines to match stuff in the MAP file */ + +#define MSG_ADDRESS (HPI_HIF_BASE+0x18) +#define MSG_LENGTH 11 +#define RESP_ADDRESS (HPI_HIF_BASE+0x44) +#define RESP_LENGTH 16 +#define QUEUE_START (HPI_HIF_BASE+0x88) +#define QUEUE_SIZE 0x8000 + +static short hpi6000_send_data_check_adr(u32 address, u32 length_in_dwords) +{ +/*#define CHECKING // comment this line in to enable checking */ +#ifdef CHECKING + if (address < (u32)MSG_ADDRESS) + return 0; + if (address > (u32)(QUEUE_START + QUEUE_SIZE)) + return 0; + if ((address + (length_in_dwords << 2)) > + (u32)(QUEUE_START + QUEUE_SIZE)) + return 0; +#else + (void)address; + (void)length_in_dwords; + return 1; +#endif +} + +static short hpi6000_send_data(struct hpi_adapter_obj *pao, u16 dsp_index, + struct hpi_message *phm, struct hpi_response *phr) +{ + struct dsp_obj *pdo = + &(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index]; + u32 data_sent = 0; + u16 ack; + u32 length, address; + u32 *p_data = (u32 *)phm->u.d.u.data.pb_data; + u16 time_out = 8; + + (void)phr; + + /* round dwDataSize down to nearest 4 bytes */ + while ((data_sent < (phm->u.d.u.data.data_size & ~3L)) + && --time_out) { + ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE); + if (ack & HPI_HIF_ERROR_MASK) + return HPI6000_ERROR_SEND_DATA_IDLE_TIMEOUT; + + if (hpi6000_send_host_command(pao, dsp_index, + HPI_HIF_SEND_DATA)) + return HPI6000_ERROR_SEND_DATA_CMD; + + hpi6000_send_dsp_interrupt(pdo); + + ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_SEND_DATA); + + if (ack & HPI_HIF_ERROR_MASK) + return HPI6000_ERROR_SEND_DATA_ACK; + + do { + /* get the address and size */ + address = hpi_read_word(pdo, HPI_HIF_ADDR(address)); + /* DSP returns number of DWORDS */ + length = hpi_read_word(pdo, HPI_HIF_ADDR(length)); + } while (hpi6000_check_PCI2040_error_flag(pao, H6READ)); + + if (!hpi6000_send_data_check_adr(address, length)) + return HPI6000_ERROR_SEND_DATA_ADR; + + /* send the data. break data into 512 DWORD blocks (2K bytes) + * and send using block write. 2Kbytes is the max as this is the + * memory window given to the HPI data register by the PCI2040 + */ + + { + u32 len = length; + u32 blk_len = 512; + while (len) { + if (len < blk_len) + blk_len = len; + if (hpi6000_dsp_block_write32(pao, dsp_index, + address, p_data, blk_len)) + return HPI6000_ERROR_SEND_DATA_WRITE; + address += blk_len * 4; + p_data += blk_len; + len -= blk_len; + } + } + + if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE)) + return HPI6000_ERROR_SEND_DATA_IDLECMD; + + hpi6000_send_dsp_interrupt(pdo); + + data_sent += length * 4; + } + if (!time_out) + return HPI6000_ERROR_SEND_DATA_TIMEOUT; + return 0; +} + +static short hpi6000_get_data(struct hpi_adapter_obj *pao, u16 dsp_index, + struct hpi_message *phm, struct hpi_response *phr) +{ + struct dsp_obj *pdo = + &(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index]; + u32 data_got = 0; + u16 ack; + u32 length, address; + u32 *p_data = (u32 *)phm->u.d.u.data.pb_data; + + (void)phr; /* this parameter not used! */ + + /* round dwDataSize down to nearest 4 bytes */ + while (data_got < (phm->u.d.u.data.data_size & ~3L)) { + ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_IDLE); + if (ack & HPI_HIF_ERROR_MASK) + return HPI6000_ERROR_GET_DATA_IDLE_TIMEOUT; + + if (hpi6000_send_host_command(pao, dsp_index, + HPI_HIF_GET_DATA)) + return HPI6000_ERROR_GET_DATA_CMD; + hpi6000_send_dsp_interrupt(pdo); + + ack = hpi6000_wait_dsp_ack(pao, dsp_index, HPI_HIF_GET_DATA); + + if (ack & HPI_HIF_ERROR_MASK) + return HPI6000_ERROR_GET_DATA_ACK; + + /* get the address and size */ + do { + address = hpi_read_word(pdo, HPI_HIF_ADDR(address)); + length = hpi_read_word(pdo, HPI_HIF_ADDR(length)); + } while (hpi6000_check_PCI2040_error_flag(pao, H6READ)); + + /* read the data */ + { + u32 len = length; + u32 blk_len = 512; + while (len) { + if (len < blk_len) + blk_len = len; + if (hpi6000_dsp_block_read32(pao, dsp_index, + address, p_data, blk_len)) + return HPI6000_ERROR_GET_DATA_READ; + address += blk_len * 4; + p_data += blk_len; + len -= blk_len; + } + } + + if (hpi6000_send_host_command(pao, dsp_index, HPI_HIF_IDLE)) + return HPI6000_ERROR_GET_DATA_IDLECMD; + hpi6000_send_dsp_interrupt(pdo); + + data_got += length * 4; + } + return 0; +} + +static void hpi6000_send_dsp_interrupt(struct dsp_obj *pdo) +{ + iowrite32(0x00030003, pdo->prHPI_control); /* DSPINT */ +} + +static short hpi6000_send_host_command(struct hpi_adapter_obj *pao, + u16 dsp_index, u32 host_cmd) +{ + struct dsp_obj *pdo = + &(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index]; + u32 timeout = TIMEOUT; + + /* set command */ + do { + hpi_write_word(pdo, HPI_HIF_ADDR(host_cmd), host_cmd); + /* flush the FIFO */ + hpi_set_address(pdo, HPI_HIF_ADDR(host_cmd)); + } while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE) && --timeout); + + /* reset the interrupt bit */ + iowrite32(0x00040004, pdo->prHPI_control); + + if (timeout) + return 0; + else + return 1; +} + +/* if the PCI2040 has recorded an HPI timeout, reset the error and return 1 */ +static short hpi6000_check_PCI2040_error_flag(struct hpi_adapter_obj *pao, + u16 read_or_write) +{ + u32 hPI_error; + + struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv; + + /* read the error bits from the PCI2040 */ + hPI_error = ioread32(phw->dw2040_HPICSR + HPI_ERROR_REPORT); + if (hPI_error) { + /* reset the error flag */ + iowrite32(0L, phw->dw2040_HPICSR + HPI_ERROR_REPORT); + phw->pCI2040HPI_error_count++; + if (read_or_write == 1) + gw_pci_read_asserts++; /************* inc global */ + else + gw_pci_write_asserts++; + return 1; + } else + return 0; +} + +static short hpi6000_wait_dsp_ack(struct hpi_adapter_obj *pao, u16 dsp_index, + u32 ack_value) +{ + struct dsp_obj *pdo = + &(*(struct hpi_hw_obj *)pao->priv).ado[dsp_index]; + u32 ack = 0L; + u32 timeout; + u32 hPIC = 0L; + + /* wait for host interrupt to signal ack is ready */ + timeout = TIMEOUT; + while (--timeout) { + hPIC = ioread32(pdo->prHPI_control); + if (hPIC & 0x04) /* 0x04 = HINT from DSP */ + break; + } + if (timeout == 0) + return HPI_HIF_ERROR_MASK; + + /* wait for dwAckValue */ + timeout = TIMEOUT; + while (--timeout) { + /* read the ack mailbox */ + ack = hpi_read_word(pdo, HPI_HIF_ADDR(dsp_ack)); + if (ack == ack_value) + break; + if ((ack & HPI_HIF_ERROR_MASK) + && !hpi6000_check_PCI2040_error_flag(pao, H6READ)) + break; + /*for (i=0;i<1000;i++) */ + /* dwPause=i+1; */ + } + if (ack & HPI_HIF_ERROR_MASK) + /* indicates bad read from DSP - + typically 0xffffff is read for some reason */ + ack = HPI_HIF_ERROR_MASK; + + if (timeout == 0) + ack = HPI_HIF_ERROR_MASK; + return (short)ack; +} + +static short hpi6000_update_control_cache(struct hpi_adapter_obj *pao, + struct hpi_message *phm) +{ + const u16 dsp_index = 0; + struct hpi_hw_obj *phw = (struct hpi_hw_obj *)pao->priv; + struct dsp_obj *pdo = &phw->ado[dsp_index]; + u32 timeout; + u32 cache_dirty_flag; + u16 err; + + hpios_dsplock_lock(pao); + + timeout = TIMEOUT; + do { + cache_dirty_flag = + hpi_read_word((struct dsp_obj *)pdo, + HPI_HIF_ADDR(control_cache_is_dirty)); + } while (hpi6000_check_PCI2040_error_flag(pao, H6READ) && --timeout); + if (!timeout) { + err = HPI6000_ERROR_CONTROL_CACHE_PARAMS; + goto unlock; + } + + if (cache_dirty_flag) { + /* read the cached controls */ + u32 address; + u32 length; + + timeout = TIMEOUT; + if (pdo->control_cache_address_on_dsp == 0) { + do { + address = + hpi_read_word((struct dsp_obj *)pdo, + HPI_HIF_ADDR(control_cache_address)); + + length = hpi_read_word((struct dsp_obj *)pdo, + HPI_HIF_ADDR + (control_cache_size_in_bytes)); + } while (hpi6000_check_PCI2040_error_flag(pao, H6READ) + && --timeout); + if (!timeout) { + err = HPI6000_ERROR_CONTROL_CACHE_ADDRLEN; + goto unlock; + } + pdo->control_cache_address_on_dsp = address; + pdo->control_cache_length_on_dsp = length; + } else { + address = pdo->control_cache_address_on_dsp; + length = pdo->control_cache_length_on_dsp; + } + + if (hpi6000_dsp_block_read32(pao, dsp_index, address, + (u32 *)&phw->control_cache[0], + length / sizeof(u32))) { + err = HPI6000_ERROR_CONTROL_CACHE_READ; + goto unlock; + } + do { + hpi_write_word((struct dsp_obj *)pdo, + HPI_HIF_ADDR(control_cache_is_dirty), 0); + /* flush the FIFO */ + hpi_set_address(pdo, HPI_HIF_ADDR(host_cmd)); + } while (hpi6000_check_PCI2040_error_flag(pao, H6WRITE) + && --timeout); + if (!timeout) { + err = HPI6000_ERROR_CONTROL_CACHE_FLUSH; + goto unlock; + } + + } + err = 0; + +unlock: + hpios_dsplock_unlock(pao); + return err; +} + +/** Get dsp index for multi DSP adapters only */ +static u16 get_dsp_index(struct hpi_adapter_obj *pao, struct hpi_message *phm) +{ + u16 ret = 0; + switch (phm->object) { + case HPI_OBJ_ISTREAM: + if (phm->obj_index < 2) + ret = 1; + break; + case HPI_OBJ_PROFILE: + ret = phm->obj_index; + break; + default: + break; + } + return ret; +} + +/** Complete transaction with DSP + +Send message, get response, send or get stream data if any. +*/ +static void hw_message(struct hpi_adapter_obj *pao, struct hpi_message *phm, + struct hpi_response *phr) +{ + u16 error = 0; + u16 dsp_index = 0; + u16 num_dsp = ((struct hpi_hw_obj *)pao->priv)->num_dsp; + + if (num_dsp < 2) + dsp_index = 0; + else { + dsp_index = get_dsp_index(pao, phm); + + /* is this checked on the DSP anyway? */ + if ((phm->function == HPI_ISTREAM_GROUP_ADD) + || (phm->function == HPI_OSTREAM_GROUP_ADD)) { + struct hpi_message hm; + u16 add_index; + hm.obj_index = phm->u.d.u.stream.stream_index; + hm.object = phm->u.d.u.stream.object_type; + add_index = get_dsp_index(pao, &hm); + if (add_index != dsp_index) { + phr->error = HPI_ERROR_NO_INTERDSP_GROUPS; + return; + } + } + } + + hpios_dsplock_lock(pao); + error = hpi6000_message_response_sequence(pao, dsp_index, phm, phr); + + /* maybe an error response */ + if (error) { + /* something failed in the HPI/DSP interface */ + phr->error = error; + /* just the header of the response is valid */ + phr->size = sizeof(struct hpi_response_header); + goto err; + } + + if (phr->error != 0) /* something failed in the DSP */ + goto err; + + switch (phm->function) { + case HPI_OSTREAM_WRITE: + case HPI_ISTREAM_ANC_WRITE: + error = hpi6000_send_data(pao, dsp_index, phm, phr); + break; + case HPI_ISTREAM_READ: + case HPI_OSTREAM_ANC_READ: + error = hpi6000_get_data(pao, dsp_index, phm, phr); + break; + case HPI_ADAPTER_GET_ASSERT: + phr->u.a.adapter_index = 0; /* dsp 0 default */ + if (num_dsp == 2) { + if (!phr->u.a.adapter_type) { + /* no assert from dsp 0, check dsp 1 */ + error = hpi6000_message_response_sequence(pao, + 1, phm, phr); + phr->u.a.adapter_index = 1; + } + } + } + + if (error) + phr->error = error; + +err: + hpios_dsplock_unlock(pao); + return; +} |