diff options
Diffstat (limited to 'sound/pci')
| -rw-r--r-- | sound/pci/Kconfig | 146 | ||||
| -rw-r--r-- | sound/pci/hda/Kconfig | 139 |
2 files changed, 140 insertions, 145 deletions
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index cc6cf89c32e..caebf296b62 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -497,151 +497,7 @@ config SND_FM801_TEA575X depends on SND_FM801_TEA575X_BOOL default SND_FM801 -config SND_HDA_INTEL - tristate "Intel HD Audio" - select SND_PCM - select SND_VMASTER - select SND_JACK if INPUT=y || INPUT=SND - help - Say Y here to include support for Intel "High Definition - Audio" (Azalia) motherboard devices. - - To compile this driver as a module, choose M here: the module - will be called snd-hda-intel. - -config SND_HDA_HWDEP - bool "Build hwdep interface for HD-audio driver" - depends on SND_HDA_INTEL - select SND_HWDEP - help - Say Y here to build a hwdep interface for HD-audio driver. - This interface can be used for out-of-band communication - with codecs for debugging purposes. - -config SND_HDA_RECONFIG - bool "Allow dynamic codec reconfiguration (EXPERIMENTAL)" - depends on SND_HDA_HWDEP && EXPERIMENTAL - help - Say Y here to enable the HD-audio codec re-configuration feature. - This adds the sysfs interfaces to allow user to clear the whole - codec configuration, change the codec setup, add extra verbs, - and re-configure the codec dynamically. - -config SND_HDA_INPUT_BEEP - bool "Support digital beep via input layer" - depends on SND_HDA_INTEL - depends on INPUT=y || INPUT=SND_HDA_INTEL - help - Say Y here to build a digital beep interface for HD-audio - driver. This interface is used to generate digital beeps. - -config SND_HDA_CODEC_REALTEK - bool "Build Realtek HD-audio codec support" - depends on SND_HDA_INTEL - default y - help - Say Y here to include Realtek HD-audio codec support in - snd-hda-intel driver, such as ALC880. - -config SND_HDA_CODEC_ANALOG - bool "Build Analog Device HD-audio codec support" - depends on SND_HDA_INTEL - default y - help - Say Y here to include Analog Device HD-audio codec support in - snd-hda-intel driver, such as AD1986A. - -config SND_HDA_CODEC_SIGMATEL - bool "Build IDT/Sigmatel HD-audio codec support" - depends on SND_HDA_INTEL - default y - help - Say Y here to include IDT (Sigmatel) HD-audio codec support in - snd-hda-intel driver, such as STAC9200. - -config SND_HDA_CODEC_VIA - bool "Build VIA HD-audio codec support" - depends on SND_HDA_INTEL - default y - help - Say Y here to include VIA HD-audio codec support in - snd-hda-intel driver, such as VT1708. - -config SND_HDA_CODEC_ATIHDMI - bool "Build ATI HDMI HD-audio codec support" - depends on SND_HDA_INTEL - default y - help - Say Y here to include ATI HDMI HD-audio codec support in - snd-hda-intel driver, such as ATI RS600 HDMI. - -config SND_HDA_CODEC_NVHDMI - bool "Build NVIDIA HDMI HD-audio codec support" - depends on SND_HDA_INTEL - default y - help - Say Y here to include NVIDIA HDMI HD-audio codec support in - snd-hda-intel driver, such as NVIDIA MCP78 HDMI. - -config SND_HDA_CODEC_INTELHDMI - bool "Build INTEL HDMI HD-audio codec support" - depends on SND_HDA_INTEL - default y - help - Say Y here to include INTEL HDMI HD-audio codec support in - snd-hda-intel driver, such as Eaglelake integrated HDMI. - -config SND_HDA_ELD - def_bool y - depends on SND_HDA_CODEC_INTELHDMI - -config SND_HDA_CODEC_CONEXANT - bool "Build Conexant HD-audio codec support" - depends on SND_HDA_INTEL - default y - help - Say Y here to include Conexant HD-audio codec support in - snd-hda-intel driver, such as CX20549. - -config SND_HDA_CODEC_CMEDIA - bool "Build C-Media HD-audio codec support" - depends on SND_HDA_INTEL - default y - help - Say Y here to include C-Media HD-audio codec support in - snd-hda-intel driver, such as CMI9880. - -config SND_HDA_CODEC_SI3054 - bool "Build Silicon Labs 3054 HD-modem codec support" - depends on SND_HDA_INTEL - default y - help - Say Y here to include Silicon Labs 3054 HD-modem codec - (and compatibles) support in snd-hda-intel driver. - -config SND_HDA_GENERIC - bool "Enable generic HD-audio codec parser" - depends on SND_HDA_INTEL - default y - help - Say Y here to enable the generic HD-audio codec parser - in snd-hda-intel driver. - -config SND_HDA_POWER_SAVE - bool "Aggressive power-saving on HD-audio" - depends on SND_HDA_INTEL && EXPERIMENTAL - help - Say Y here to enable more aggressive power-saving mode on - HD-audio driver. The power-saving timeout can be configured - via power_save option or over sysfs on-the-fly. - -config SND_HDA_POWER_SAVE_DEFAULT - int "Default time-out for HD-audio power-save mode" - depends on SND_HDA_POWER_SAVE - default 0 - help - The default time-out value in seconds for HD-audio automatic - power-save mode. 0 means to disable the power-save mode. +source "sound/pci/hda/Kconfig" config SND_HDSP tristate "RME Hammerfall DSP Audio" diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig new file mode 100644 index 00000000000..7c60f1a45a8 --- /dev/null +++ b/sound/pci/hda/Kconfig @@ -0,0 +1,139 @@ +menuconfig SND_HDA_INTEL + tristate "Intel HD Audio" + select SND_PCM + select SND_VMASTER + select SND_JACK if INPUT=y || INPUT=SND + help + Say Y here to include support for Intel "High Definition + Audio" (Azalia) and its compatible devices. + + This option enables the HD-audio controller. Don't forget + to choose the appropriate codec options below. + + To compile this driver as a module, choose M here: the module + will be called snd-hda-intel. + +if SND_HDA_INTEL + +config SND_HDA_HWDEP + bool "Build hwdep interface for HD-audio driver" + select SND_HWDEP + help + Say Y here to build a hwdep interface for HD-audio driver. + This interface can be used for out-of-band communication + with codecs for debugging purposes. + +config SND_HDA_RECONFIG + bool "Allow dynamic codec reconfiguration (EXPERIMENTAL)" + depends on SND_HDA_HWDEP && EXPERIMENTAL + help + Say Y here to enable the HD-audio codec re-configuration feature. + This adds the sysfs interfaces to allow user to clear the whole + codec configuration, change the codec setup, add extra verbs, + and re-configure the codec dynamically. + +config SND_HDA_INPUT_BEEP + bool "Support digital beep via input layer" + depends on INPUT=y || INPUT=SND_HDA_INTEL + help + Say Y here to build a digital beep interface for HD-audio + driver. This interface is used to generate digital beeps. + +config SND_HDA_CODEC_REALTEK + bool "Build Realtek HD-audio codec support" + default y + help + Say Y here to include Realtek HD-audio codec support in + snd-hda-intel driver, such as ALC880. + +config SND_HDA_CODEC_ANALOG + bool "Build Analog Device HD-audio codec support" + default y + help + Say Y here to include Analog Device HD-audio codec support in + snd-hda-intel driver, such as AD1986A. + +config SND_HDA_CODEC_SIGMATEL + bool "Build IDT/Sigmatel HD-audio codec support" + default y + help + Say Y here to include IDT (Sigmatel) HD-audio codec support in + snd-hda-intel driver, such as STAC9200. + +config SND_HDA_CODEC_VIA + bool "Build VIA HD-audio codec support" + default y + help + Say Y here to include VIA HD-audio codec support in + snd-hda-intel driver, such as VT1708. + +config SND_HDA_CODEC_ATIHDMI + bool "Build ATI HDMI HD-audio codec support" + default y + help + Say Y here to include ATI HDMI HD-audio codec support in + snd-hda-intel driver, such as ATI RS600 HDMI. + +config SND_HDA_CODEC_NVHDMI + bool "Build NVIDIA HDMI HD-audio codec support" + default y + help + Say Y here to include NVIDIA HDMI HD-audio codec support in + snd-hda-intel driver, such as NVIDIA MCP78 HDMI. + +config SND_HDA_CODEC_INTELHDMI + bool "Build INTEL HDMI HD-audio codec support" + default y + help + Say Y here to include INTEL HDMI HD-audio codec support in + snd-hda-intel driver, such as Eaglelake integrated HDMI. + +config SND_HDA_ELD + def_bool y + depends on SND_HDA_CODEC_INTELHDMI + +config SND_HDA_CODEC_CONEXANT + bool "Build Conexant HD-audio codec support" + default y + help + Say Y here to include Conexant HD-audio codec support in + snd-hda-intel driver, such as CX20549. + +config SND_HDA_CODEC_CMEDIA + bool "Build C-Media HD-audio codec support" + default y + help + Say Y here to include C-Media HD-audio codec support in + snd-hda-intel driver, such as CMI9880. + +config SND_HDA_CODEC_SI3054 + bool "Build Silicon Labs 3054 HD-modem codec support" + default y + help + Say Y here to include Silicon Labs 3054 HD-modem codec + (and compatibles) support in snd-hda-intel driver. + +config SND_HDA_GENERIC + bool "Enable generic HD-audio codec parser" + default y + help + Say Y here to enable the generic HD-audio codec parser + in snd-hda-intel driver. + +config SND_HDA_POWER_SAVE + bool "Aggressive power-saving on HD-audio" + depends on EXPERIMENTAL + help + Say Y here to enable more aggressive power-saving mode on + HD-audio driver. The power-saving timeout can be configured + via power_save option or over sysfs on-the-fly. + +config SND_HDA_POWER_SAVE_DEFAULT + int "Default time-out for HD-audio power-save mode" + depends on SND_HDA_POWER_SAVE + default 0 + help + The default time-out value in seconds for HD-audio automatic + power-save mode. 0 means to disable the power-save mode. + +endif |