diff options
Diffstat (limited to 'sound/soc/codecs/uda134x.c')
| -rw-r--r-- | sound/soc/codecs/uda134x.c | 64 |
1 files changed, 43 insertions, 21 deletions
diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c index 28aac53c97b..f3b4c1d6a82 100644 --- a/sound/soc/codecs/uda134x.c +++ b/sound/soc/codecs/uda134x.c @@ -28,19 +28,6 @@ #include "uda134x.h" -#define POWER_OFF_ON_STANDBY 1 -/* - ALSA SOC usually puts the device in standby mode when it's not used - for sometime. If you define POWER_OFF_ON_STANDBY the driver will - turn off the ADC/DAC when this callback is invoked and turn it back - on when needed. Unfortunately this will result in a very light bump - (it can be audible only with good earphones). If this bothers you - just comment this line, you will have slightly higher power - consumption . Please note that sending the L3 command for ADC is - enough to make the bump, so it doesn't make difference if you - completely take off power from the codec. - */ - #define UDA134X_RATES SNDRV_PCM_RATE_8000_48000 #define UDA134X_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE | \ SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S20_3LE) @@ -58,7 +45,7 @@ static const char uda134x_reg[UDA134X_REGS_NUM] = { /* Extended address registers */ 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, /* Status, data regs */ - 0x00, 0x83, 0x00, 0x40, 0x80, 0x00, + 0x00, 0x83, 0x00, 0x40, 0x80, 0xC0, 0x00, }; /* @@ -117,6 +104,7 @@ static int uda134x_write(struct snd_soc_codec *codec, unsigned int reg, case UDA134X_DATA000: case UDA134X_DATA001: case UDA134X_DATA010: + case UDA134X_DATA011: addr = UDA134X_DATA0_ADDR; break; case UDA134X_DATA1: @@ -353,8 +341,22 @@ static int uda134x_set_bias_level(struct snd_soc_codec *codec, switch (level) { case SND_SOC_BIAS_ON: /* ADC, DAC on */ - reg = uda134x_read_reg_cache(codec, UDA134X_STATUS1); - uda134x_write(codec, UDA134X_STATUS1, reg | 0x03); + switch (pd->model) { + case UDA134X_UDA1340: + case UDA134X_UDA1344: + case UDA134X_UDA1345: + reg = uda134x_read_reg_cache(codec, UDA134X_DATA011); + uda134x_write(codec, UDA134X_DATA011, reg | 0x03); + break; + case UDA134X_UDA1341: + reg = uda134x_read_reg_cache(codec, UDA134X_STATUS1); + uda134x_write(codec, UDA134X_STATUS1, reg | 0x03); + break; + default: + printk(KERN_ERR "UDA134X SoC codec: " + "unsupported model %d\n", pd->model); + return -EINVAL; + } break; case SND_SOC_BIAS_PREPARE: /* power on */ @@ -367,8 +369,22 @@ static int uda134x_set_bias_level(struct snd_soc_codec *codec, break; case SND_SOC_BIAS_STANDBY: /* ADC, DAC power off */ - reg = uda134x_read_reg_cache(codec, UDA134X_STATUS1); - uda134x_write(codec, UDA134X_STATUS1, reg & ~(0x03)); + switch (pd->model) { + case UDA134X_UDA1340: + case UDA134X_UDA1344: + case UDA134X_UDA1345: + reg = uda134x_read_reg_cache(codec, UDA134X_DATA011); + uda134x_write(codec, UDA134X_DATA011, reg & ~(0x03)); + break; + case UDA134X_UDA1341: + reg = uda134x_read_reg_cache(codec, UDA134X_STATUS1); + uda134x_write(codec, UDA134X_STATUS1, reg & ~(0x03)); + break; + default: + printk(KERN_ERR "UDA134X SoC codec: " + "unsupported model %d\n", pd->model); + return -EINVAL; + } break; case SND_SOC_BIAS_OFF: /* power off */ @@ -531,9 +547,7 @@ static int uda134x_soc_probe(struct platform_device *pdev) codec->num_dai = 1; codec->read = uda134x_read_reg_cache; codec->write = uda134x_write; -#ifdef POWER_OFF_ON_STANDBY - codec->set_bias_level = uda134x_set_bias_level; -#endif + INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -544,6 +558,14 @@ static int uda134x_soc_probe(struct platform_device *pdev) uda134x_reset(codec); + if (pd->is_powered_on_standby) { + codec->set_bias_level = NULL; + uda134x_set_bias_level(codec, SND_SOC_BIAS_ON); + } else { + codec->set_bias_level = uda134x_set_bias_level; + uda134x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + } + /* register pcms */ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); if (ret < 0) { |