summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm8903.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/wm8903.c')
-rw-r--r--sound/soc/codecs/wm8903.c664
1 files changed, 388 insertions, 276 deletions
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index 4ad8ebd290e..c91fb2f99c1 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -23,8 +23,9 @@
#include <linux/gpio.h>
#include <linux/pm.h>
#include <linux/i2c.h>
-#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/slab.h>
+#include <linux/irq.h>
#include <sound/core.h>
#include <sound/jack.h>
#include <sound/pcm.h>
@@ -38,184 +39,85 @@
#include "wm8903.h"
/* Register defaults at reset */
-static u16 wm8903_reg_defaults[] = {
- 0x8903, /* R0 - SW Reset and ID */
- 0x0000, /* R1 - Revision Number */
- 0x0000, /* R2 */
- 0x0000, /* R3 */
- 0x0018, /* R4 - Bias Control 0 */
- 0x0000, /* R5 - VMID Control 0 */
- 0x0000, /* R6 - Mic Bias Control 0 */
- 0x0000, /* R7 */
- 0x0001, /* R8 - Analogue DAC 0 */
- 0x0000, /* R9 */
- 0x0001, /* R10 - Analogue ADC 0 */
- 0x0000, /* R11 */
- 0x0000, /* R12 - Power Management 0 */
- 0x0000, /* R13 - Power Management 1 */
- 0x0000, /* R14 - Power Management 2 */
- 0x0000, /* R15 - Power Management 3 */
- 0x0000, /* R16 - Power Management 4 */
- 0x0000, /* R17 - Power Management 5 */
- 0x0000, /* R18 - Power Management 6 */
- 0x0000, /* R19 */
- 0x0400, /* R20 - Clock Rates 0 */
- 0x0D07, /* R21 - Clock Rates 1 */
- 0x0000, /* R22 - Clock Rates 2 */
- 0x0000, /* R23 */
- 0x0050, /* R24 - Audio Interface 0 */
- 0x0242, /* R25 - Audio Interface 1 */
- 0x0008, /* R26 - Audio Interface 2 */
- 0x0022, /* R27 - Audio Interface 3 */
- 0x0000, /* R28 */
- 0x0000, /* R29 */
- 0x00C0, /* R30 - DAC Digital Volume Left */
- 0x00C0, /* R31 - DAC Digital Volume Right */
- 0x0000, /* R32 - DAC Digital 0 */
- 0x0000, /* R33 - DAC Digital 1 */
- 0x0000, /* R34 */
- 0x0000, /* R35 */
- 0x00C0, /* R36 - ADC Digital Volume Left */
- 0x00C0, /* R37 - ADC Digital Volume Right */
- 0x0000, /* R38 - ADC Digital 0 */
- 0x0073, /* R39 - Digital Microphone 0 */
- 0x09BF, /* R40 - DRC 0 */
- 0x3241, /* R41 - DRC 1 */
- 0x0020, /* R42 - DRC 2 */
- 0x0000, /* R43 - DRC 3 */
- 0x0085, /* R44 - Analogue Left Input 0 */
- 0x0085, /* R45 - Analogue Right Input 0 */
- 0x0044, /* R46 - Analogue Left Input 1 */
- 0x0044, /* R47 - Analogue Right Input 1 */
- 0x0000, /* R48 */
- 0x0000, /* R49 */
- 0x0008, /* R50 - Analogue Left Mix 0 */
- 0x0004, /* R51 - Analogue Right Mix 0 */
- 0x0000, /* R52 - Analogue Spk Mix Left 0 */
- 0x0000, /* R53 - Analogue Spk Mix Left 1 */
- 0x0000, /* R54 - Analogue Spk Mix Right 0 */
- 0x0000, /* R55 - Analogue Spk Mix Right 1 */
- 0x0000, /* R56 */
- 0x002D, /* R57 - Analogue OUT1 Left */
- 0x002D, /* R58 - Analogue OUT1 Right */
- 0x0039, /* R59 - Analogue OUT2 Left */
- 0x0039, /* R60 - Analogue OUT2 Right */
- 0x0100, /* R61 */
- 0x0139, /* R62 - Analogue OUT3 Left */
- 0x0139, /* R63 - Analogue OUT3 Right */
- 0x0000, /* R64 */
- 0x0000, /* R65 - Analogue SPK Output Control 0 */
- 0x0000, /* R66 */
- 0x0010, /* R67 - DC Servo 0 */
- 0x0100, /* R68 */
- 0x00A4, /* R69 - DC Servo 2 */
- 0x0807, /* R70 */
- 0x0000, /* R71 */
- 0x0000, /* R72 */
- 0x0000, /* R73 */
- 0x0000, /* R74 */
- 0x0000, /* R75 */
- 0x0000, /* R76 */
- 0x0000, /* R77 */
- 0x0000, /* R78 */
- 0x000E, /* R79 */
- 0x0000, /* R80 */
- 0x0000, /* R81 */
- 0x0000, /* R82 */
- 0x0000, /* R83 */
- 0x0000, /* R84 */
- 0x0000, /* R85 */
- 0x0000, /* R86 */
- 0x0006, /* R87 */
- 0x0000, /* R88 */
- 0x0000, /* R89 */
- 0x0000, /* R90 - Analogue HP 0 */
- 0x0060, /* R91 */
- 0x0000, /* R92 */
- 0x0000, /* R93 */
- 0x0000, /* R94 - Analogue Lineout 0 */
- 0x0060, /* R95 */
- 0x0000, /* R96 */
- 0x0000, /* R97 */
- 0x0000, /* R98 - Charge Pump 0 */
- 0x1F25, /* R99 */
- 0x2B19, /* R100 */
- 0x01C0, /* R101 */
- 0x01EF, /* R102 */
- 0x2B00, /* R103 */
- 0x0000, /* R104 - Class W 0 */
- 0x01C0, /* R105 */
- 0x1C10, /* R106 */
- 0x0000, /* R107 */
- 0x0000, /* R108 - Write Sequencer 0 */
- 0x0000, /* R109 - Write Sequencer 1 */
- 0x0000, /* R110 - Write Sequencer 2 */
- 0x0000, /* R111 - Write Sequencer 3 */
- 0x0000, /* R112 - Write Sequencer 4 */
- 0x0000, /* R113 */
- 0x0000, /* R114 - Control Interface */
- 0x0000, /* R115 */
- 0x00A8, /* R116 - GPIO Control 1 */
- 0x00A8, /* R117 - GPIO Control 2 */
- 0x00A8, /* R118 - GPIO Control 3 */
- 0x0220, /* R119 - GPIO Control 4 */
- 0x01A0, /* R120 - GPIO Control 5 */
- 0x0000, /* R121 - Interrupt Status 1 */
- 0xFFFF, /* R122 - Interrupt Status 1 Mask */
- 0x0000, /* R123 - Interrupt Polarity 1 */
- 0x0000, /* R124 */
- 0x0003, /* R125 */
- 0x0000, /* R126 - Interrupt Control */
- 0x0000, /* R127 */
- 0x0005, /* R128 */
- 0x0000, /* R129 - Control Interface Test 1 */
- 0x0000, /* R130 */
- 0x0000, /* R131 */
- 0x0000, /* R132 */
- 0x0000, /* R133 */
- 0x0000, /* R134 */
- 0x03FF, /* R135 */
- 0x0007, /* R136 */
- 0x0040, /* R137 */
- 0x0000, /* R138 */
- 0x0000, /* R139 */
- 0x0000, /* R140 */
- 0x0000, /* R141 */
- 0x0000, /* R142 */
- 0x0000, /* R143 */
- 0x0000, /* R144 */
- 0x0000, /* R145 */
- 0x0000, /* R146 */
- 0x0000, /* R147 */
- 0x4000, /* R148 */
- 0x6810, /* R149 - Charge Pump Test 1 */
- 0x0004, /* R150 */
- 0x0000, /* R151 */
- 0x0000, /* R152 */
- 0x0000, /* R153 */
- 0x0000, /* R154 */
- 0x0000, /* R155 */
- 0x0000, /* R156 */
- 0x0000, /* R157 */
- 0x0000, /* R158 */
- 0x0000, /* R159 */
- 0x0000, /* R160 */
- 0x0000, /* R161 */
- 0x0000, /* R162 */
- 0x0000, /* R163 */
- 0x0028, /* R164 - Clock Rate Test 4 */
- 0x0004, /* R165 */
- 0x0000, /* R166 */
- 0x0060, /* R167 */
- 0x0000, /* R168 */
- 0x0000, /* R169 */
- 0x0000, /* R170 */
- 0x0000, /* R171 */
- 0x0000, /* R172 - Analogue Output Bias 0 */
+static const struct reg_default wm8903_reg_defaults[] = {
+ { 4, 0x0018 }, /* R4 - Bias Control 0 */
+ { 5, 0x0000 }, /* R5 - VMID Control 0 */
+ { 6, 0x0000 }, /* R6 - Mic Bias Control 0 */
+ { 8, 0x0001 }, /* R8 - Analogue DAC 0 */
+ { 10, 0x0001 }, /* R10 - Analogue ADC 0 */
+ { 12, 0x0000 }, /* R12 - Power Management 0 */
+ { 13, 0x0000 }, /* R13 - Power Management 1 */
+ { 14, 0x0000 }, /* R14 - Power Management 2 */
+ { 15, 0x0000 }, /* R15 - Power Management 3 */
+ { 16, 0x0000 }, /* R16 - Power Management 4 */
+ { 17, 0x0000 }, /* R17 - Power Management 5 */
+ { 18, 0x0000 }, /* R18 - Power Management 6 */
+ { 20, 0x0400 }, /* R20 - Clock Rates 0 */
+ { 21, 0x0D07 }, /* R21 - Clock Rates 1 */
+ { 22, 0x0000 }, /* R22 - Clock Rates 2 */
+ { 24, 0x0050 }, /* R24 - Audio Interface 0 */
+ { 25, 0x0242 }, /* R25 - Audio Interface 1 */
+ { 26, 0x0008 }, /* R26 - Audio Interface 2 */
+ { 27, 0x0022 }, /* R27 - Audio Interface 3 */
+ { 30, 0x00C0 }, /* R30 - DAC Digital Volume Left */
+ { 31, 0x00C0 }, /* R31 - DAC Digital Volume Right */
+ { 32, 0x0000 }, /* R32 - DAC Digital 0 */
+ { 33, 0x0000 }, /* R33 - DAC Digital 1 */
+ { 36, 0x00C0 }, /* R36 - ADC Digital Volume Left */
+ { 37, 0x00C0 }, /* R37 - ADC Digital Volume Right */
+ { 38, 0x0000 }, /* R38 - ADC Digital 0 */
+ { 39, 0x0073 }, /* R39 - Digital Microphone 0 */
+ { 40, 0x09BF }, /* R40 - DRC 0 */
+ { 41, 0x3241 }, /* R41 - DRC 1 */
+ { 42, 0x0020 }, /* R42 - DRC 2 */
+ { 43, 0x0000 }, /* R43 - DRC 3 */
+ { 44, 0x0085 }, /* R44 - Analogue Left Input 0 */
+ { 45, 0x0085 }, /* R45 - Analogue Right Input 0 */
+ { 46, 0x0044 }, /* R46 - Analogue Left Input 1 */
+ { 47, 0x0044 }, /* R47 - Analogue Right Input 1 */
+ { 50, 0x0008 }, /* R50 - Analogue Left Mix 0 */
+ { 51, 0x0004 }, /* R51 - Analogue Right Mix 0 */
+ { 52, 0x0000 }, /* R52 - Analogue Spk Mix Left 0 */
+ { 53, 0x0000 }, /* R53 - Analogue Spk Mix Left 1 */
+ { 54, 0x0000 }, /* R54 - Analogue Spk Mix Right 0 */
+ { 55, 0x0000 }, /* R55 - Analogue Spk Mix Right 1 */
+ { 57, 0x002D }, /* R57 - Analogue OUT1 Left */
+ { 58, 0x002D }, /* R58 - Analogue OUT1 Right */
+ { 59, 0x0039 }, /* R59 - Analogue OUT2 Left */
+ { 60, 0x0039 }, /* R60 - Analogue OUT2 Right */
+ { 62, 0x0139 }, /* R62 - Analogue OUT3 Left */
+ { 63, 0x0139 }, /* R63 - Analogue OUT3 Right */
+ { 64, 0x0000 }, /* R65 - Analogue SPK Output Control 0 */
+ { 67, 0x0010 }, /* R67 - DC Servo 0 */
+ { 69, 0x00A4 }, /* R69 - DC Servo 2 */
+ { 90, 0x0000 }, /* R90 - Analogue HP 0 */
+ { 94, 0x0000 }, /* R94 - Analogue Lineout 0 */
+ { 98, 0x0000 }, /* R98 - Charge Pump 0 */
+ { 104, 0x0000 }, /* R104 - Class W 0 */
+ { 108, 0x0000 }, /* R108 - Write Sequencer 0 */
+ { 109, 0x0000 }, /* R109 - Write Sequencer 1 */
+ { 110, 0x0000 }, /* R110 - Write Sequencer 2 */
+ { 111, 0x0000 }, /* R111 - Write Sequencer 3 */
+ { 112, 0x0000 }, /* R112 - Write Sequencer 4 */
+ { 114, 0x0000 }, /* R114 - Control Interface */
+ { 116, 0x00A8 }, /* R116 - GPIO Control 1 */
+ { 117, 0x00A8 }, /* R117 - GPIO Control 2 */
+ { 118, 0x00A8 }, /* R118 - GPIO Control 3 */
+ { 119, 0x0220 }, /* R119 - GPIO Control 4 */
+ { 120, 0x01A0 }, /* R120 - GPIO Control 5 */
+ { 122, 0xFFFF }, /* R122 - Interrupt Status 1 Mask */
+ { 123, 0x0000 }, /* R123 - Interrupt Polarity 1 */
+ { 126, 0x0000 }, /* R126 - Interrupt Control */
+ { 129, 0x0000 }, /* R129 - Control Interface Test 1 */
+ { 149, 0x6810 }, /* R149 - Charge Pump Test 1 */
+ { 164, 0x0028 }, /* R164 - Clock Rate Test 4 */
+ { 172, 0x0000 }, /* R172 - Analogue Output Bias 0 */
};
struct wm8903_priv {
+ struct wm8903_platform_data *pdata;
struct snd_soc_codec *codec;
+ struct regmap *regmap;
int sysclk;
int irq;
@@ -240,7 +142,93 @@ struct wm8903_priv {
#endif
};
-static int wm8903_volatile_register(struct snd_soc_codec *codec, unsigned int reg)
+static bool wm8903_readable_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case WM8903_SW_RESET_AND_ID:
+ case WM8903_REVISION_NUMBER:
+ case WM8903_BIAS_CONTROL_0:
+ case WM8903_VMID_CONTROL_0:
+ case WM8903_MIC_BIAS_CONTROL_0:
+ case WM8903_ANALOGUE_DAC_0:
+ case WM8903_ANALOGUE_ADC_0:
+ case WM8903_POWER_MANAGEMENT_0:
+ case WM8903_POWER_MANAGEMENT_1:
+ case WM8903_POWER_MANAGEMENT_2:
+ case WM8903_POWER_MANAGEMENT_3:
+ case WM8903_POWER_MANAGEMENT_4:
+ case WM8903_POWER_MANAGEMENT_5:
+ case WM8903_POWER_MANAGEMENT_6:
+ case WM8903_CLOCK_RATES_0:
+ case WM8903_CLOCK_RATES_1:
+ case WM8903_CLOCK_RATES_2:
+ case WM8903_AUDIO_INTERFACE_0:
+ case WM8903_AUDIO_INTERFACE_1:
+ case WM8903_AUDIO_INTERFACE_2:
+ case WM8903_AUDIO_INTERFACE_3:
+ case WM8903_DAC_DIGITAL_VOLUME_LEFT:
+ case WM8903_DAC_DIGITAL_VOLUME_RIGHT:
+ case WM8903_DAC_DIGITAL_0:
+ case WM8903_DAC_DIGITAL_1:
+ case WM8903_ADC_DIGITAL_VOLUME_LEFT:
+ case WM8903_ADC_DIGITAL_VOLUME_RIGHT:
+ case WM8903_ADC_DIGITAL_0:
+ case WM8903_DIGITAL_MICROPHONE_0:
+ case WM8903_DRC_0:
+ case WM8903_DRC_1:
+ case WM8903_DRC_2:
+ case WM8903_DRC_3:
+ case WM8903_ANALOGUE_LEFT_INPUT_0:
+ case WM8903_ANALOGUE_RIGHT_INPUT_0:
+ case WM8903_ANALOGUE_LEFT_INPUT_1:
+ case WM8903_ANALOGUE_RIGHT_INPUT_1:
+ case WM8903_ANALOGUE_LEFT_MIX_0:
+ case WM8903_ANALOGUE_RIGHT_MIX_0:
+ case WM8903_ANALOGUE_SPK_MIX_LEFT_0:
+ case WM8903_ANALOGUE_SPK_MIX_LEFT_1:
+ case WM8903_ANALOGUE_SPK_MIX_RIGHT_0:
+ case WM8903_ANALOGUE_SPK_MIX_RIGHT_1:
+ case WM8903_ANALOGUE_OUT1_LEFT:
+ case WM8903_ANALOGUE_OUT1_RIGHT:
+ case WM8903_ANALOGUE_OUT2_LEFT:
+ case WM8903_ANALOGUE_OUT2_RIGHT:
+ case WM8903_ANALOGUE_OUT3_LEFT:
+ case WM8903_ANALOGUE_OUT3_RIGHT:
+ case WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0:
+ case WM8903_DC_SERVO_0:
+ case WM8903_DC_SERVO_2:
+ case WM8903_DC_SERVO_READBACK_1:
+ case WM8903_DC_SERVO_READBACK_2:
+ case WM8903_DC_SERVO_READBACK_3:
+ case WM8903_DC_SERVO_READBACK_4:
+ case WM8903_ANALOGUE_HP_0:
+ case WM8903_ANALOGUE_LINEOUT_0:
+ case WM8903_CHARGE_PUMP_0:
+ case WM8903_CLASS_W_0:
+ case WM8903_WRITE_SEQUENCER_0:
+ case WM8903_WRITE_SEQUENCER_1:
+ case WM8903_WRITE_SEQUENCER_2:
+ case WM8903_WRITE_SEQUENCER_3:
+ case WM8903_WRITE_SEQUENCER_4:
+ case WM8903_CONTROL_INTERFACE:
+ case WM8903_GPIO_CONTROL_1:
+ case WM8903_GPIO_CONTROL_2:
+ case WM8903_GPIO_CONTROL_3:
+ case WM8903_GPIO_CONTROL_4:
+ case WM8903_GPIO_CONTROL_5:
+ case WM8903_INTERRUPT_STATUS_1:
+ case WM8903_INTERRUPT_STATUS_1_MASK:
+ case WM8903_INTERRUPT_POLARITY_1:
+ case WM8903_INTERRUPT_CONTROL:
+ case WM8903_CLOCK_RATE_TEST_4:
+ case WM8903_ANALOGUE_OUTPUT_BIAS_0:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool wm8903_volatile_register(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM8903_SW_RESET_AND_ID:
@@ -258,13 +246,6 @@ static int wm8903_volatile_register(struct snd_soc_codec *codec, unsigned int re
}
}
-static void wm8903_reset(struct snd_soc_codec *codec)
-{
- snd_soc_write(codec, WM8903_SW_RESET_AND_ID, 0);
- memcpy(codec->reg_cache, wm8903_reg_defaults,
- sizeof(wm8903_reg_defaults));
-}
-
static int wm8903_cp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
@@ -839,7 +820,7 @@ SND_SOC_DAPM_OUTPUT("LON"),
SND_SOC_DAPM_OUTPUT("ROP"),
SND_SOC_DAPM_OUTPUT("RON"),
-SND_SOC_DAPM_MICBIAS("Mic Bias", WM8903_MIC_BIAS_CONTROL_0, 0, 0),
+SND_SOC_DAPM_SUPPLY("MICBIAS", WM8903_MIC_BIAS_CONTROL_0, 0, 0, NULL, 0),
SND_SOC_DAPM_MUX("Left Input Mux", SND_SOC_NOPM, 0, 0, &linput_mux),
SND_SOC_DAPM_MUX("Left Input Inverting Mux", SND_SOC_NOPM, 0, 0,
@@ -948,7 +929,7 @@ SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8903_CLOCK_RATES_2, 2, 0, NULL, 0),
static const struct snd_soc_dapm_route wm8903_intercon[] = {
{ "CLK_DSP", NULL, "CLK_SYS" },
- { "Mic Bias", NULL, "CLK_SYS" },
+ { "MICBIAS", NULL, "CLK_SYS" },
{ "HPL_DCS", NULL, "CLK_SYS" },
{ "HPR_DCS", NULL, "CLK_SYS" },
{ "LINEOUTL_DCS", NULL, "CLK_SYS" },
@@ -1732,7 +1713,7 @@ static irqreturn_t wm8903_irq(int irq, void *data)
SNDRV_PCM_FMTBIT_S20_3LE |\
SNDRV_PCM_FMTBIT_S24_LE)
-static struct snd_soc_dai_ops wm8903_dai_ops = {
+static const struct snd_soc_dai_ops wm8903_dai_ops = {
.hw_params = wm8903_hw_params,
.digital_mute = wm8903_digital_mute,
.set_fmt = wm8903_set_dai_fmt,
@@ -1759,7 +1740,7 @@ static struct snd_soc_dai_driver wm8903_dai = {
.symmetric_rates = 1,
};
-static int wm8903_suspend(struct snd_soc_codec *codec, pm_message_t state)
+static int wm8903_suspend(struct snd_soc_codec *codec)
{
wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
@@ -1768,23 +1749,11 @@ static int wm8903_suspend(struct snd_soc_codec *codec, pm_message_t state)
static int wm8903_resume(struct snd_soc_codec *codec)
{
- int i;
- u16 *reg_cache = codec->reg_cache;
- u16 *tmp_cache = kmemdup(reg_cache, sizeof(wm8903_reg_defaults),
- GFP_KERNEL);
+ struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
- /* Bring the codec back up to standby first to minimise pop/clicks */
- wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ regcache_sync(wm8903->regmap);
- /* Sync back everything else */
- if (tmp_cache) {
- for (i = 2; i < ARRAY_SIZE(wm8903_reg_defaults); i++)
- if (tmp_cache[i] != reg_cache[i])
- snd_soc_write(codec, i, tmp_cache[i]);
- kfree(tmp_cache);
- } else {
- dev_err(codec->dev, "Failed to allocate temporary cache\n");
- }
+ wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
return 0;
}
@@ -1808,13 +1777,18 @@ static int wm8903_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
struct wm8903_priv *wm8903 = gpio_to_wm8903(chip);
struct snd_soc_codec *codec = wm8903->codec;
unsigned int mask, val;
+ int ret;
mask = WM8903_GP1_FN_MASK | WM8903_GP1_DIR_MASK;
val = (WM8903_GPn_FN_GPIO_INPUT << WM8903_GP1_FN_SHIFT) |
WM8903_GP1_DIR;
- return snd_soc_update_bits(codec, WM8903_GPIO_CONTROL_1 + offset,
- mask, val);
+ ret = snd_soc_update_bits(codec, WM8903_GPIO_CONTROL_1 + offset,
+ mask, val);
+ if (ret < 0)
+ return ret;
+
+ return 0;
}
static int wm8903_gpio_get(struct gpio_chip *chip, unsigned offset)
@@ -1834,13 +1808,18 @@ static int wm8903_gpio_direction_out(struct gpio_chip *chip,
struct wm8903_priv *wm8903 = gpio_to_wm8903(chip);
struct snd_soc_codec *codec = wm8903->codec;
unsigned int mask, val;
+ int ret;
mask = WM8903_GP1_FN_MASK | WM8903_GP1_DIR_MASK | WM8903_GP1_LVL_MASK;
val = (WM8903_GPn_FN_GPIO_OUTPUT << WM8903_GP1_FN_SHIFT) |
(value << WM8903_GP2_LVL_SHIFT);
- return snd_soc_update_bits(codec, WM8903_GPIO_CONTROL_1 + offset,
- mask, val);
+ ret = snd_soc_update_bits(codec, WM8903_GPIO_CONTROL_1 + offset,
+ mask, val);
+ if (ret < 0)
+ return ret;
+
+ return 0;
}
static void wm8903_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
@@ -1867,14 +1846,14 @@ static struct gpio_chip wm8903_template_chip = {
static void wm8903_init_gpio(struct snd_soc_codec *codec)
{
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
- struct wm8903_platform_data *pdata = dev_get_platdata(codec->dev);
+ struct wm8903_platform_data *pdata = wm8903->pdata;
int ret;
wm8903->gpio_chip = wm8903_template_chip;
wm8903->gpio_chip.ngpio = WM8903_NUM_GPIO;
wm8903->gpio_chip.dev = codec->dev;
- if (pdata && pdata->gpio_base)
+ if (pdata->gpio_base)
wm8903->gpio_chip.base = pdata->gpio_base;
else
wm8903->gpio_chip.base = -1;
@@ -1905,78 +1884,65 @@ static void wm8903_free_gpio(struct snd_soc_codec *codec)
static int wm8903_probe(struct snd_soc_codec *codec)
{
- struct wm8903_platform_data *pdata = dev_get_platdata(codec->dev);
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ struct wm8903_platform_data *pdata = wm8903->pdata;
int ret, i;
int trigger, irq_pol;
u16 val;
+ bool mic_gpio = false;
wm8903->codec = codec;
+ codec->control_data = wm8903->regmap;
- ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_REGMAP);
if (ret != 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
return ret;
}
- val = snd_soc_read(codec, WM8903_SW_RESET_AND_ID);
- if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
- dev_err(codec->dev,
- "Device with ID register %x is not a WM8903\n", val);
- return -ENODEV;
- }
-
- val = snd_soc_read(codec, WM8903_REVISION_NUMBER);
- dev_info(codec->dev, "WM8903 revision %c\n",
- (val & WM8903_CHIP_REV_MASK) + 'A');
+ /* Set up GPIOs, detect if any are MIC detect outputs */
+ for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
+ if ((!pdata->gpio_cfg[i]) ||
+ (pdata->gpio_cfg[i] > WM8903_GPIO_CONFIG_ZERO))
+ continue;
- wm8903_reset(codec);
+ snd_soc_write(codec, WM8903_GPIO_CONTROL_1 + i,
+ pdata->gpio_cfg[i] & 0x7fff);
- /* Set up GPIOs and microphone detection */
- if (pdata) {
- bool mic_gpio = false;
+ val = (pdata->gpio_cfg[i] & WM8903_GP1_FN_MASK)
+ >> WM8903_GP1_FN_SHIFT;
- for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
- if (pdata->gpio_cfg[i] == WM8903_GPIO_NO_CONFIG)
- continue;
-
- snd_soc_write(codec, WM8903_GPIO_CONTROL_1 + i,
- pdata->gpio_cfg[i] & 0xffff);
-
- val = (pdata->gpio_cfg[i] & WM8903_GP1_FN_MASK)
- >> WM8903_GP1_FN_SHIFT;
-
- switch (val) {
- case WM8903_GPn_FN_MICBIAS_CURRENT_DETECT:
- case WM8903_GPn_FN_MICBIAS_SHORT_DETECT:
- mic_gpio = true;
- break;
- default:
- break;
- }
+ switch (val) {
+ case WM8903_GPn_FN_MICBIAS_CURRENT_DETECT:
+ case WM8903_GPn_FN_MICBIAS_SHORT_DETECT:
+ mic_gpio = true;
+ break;
+ default:
+ break;
}
+ }
+
+ /* Set up microphone detection */
+ snd_soc_write(codec, WM8903_MIC_BIAS_CONTROL_0,
+ pdata->micdet_cfg);
- snd_soc_write(codec, WM8903_MIC_BIAS_CONTROL_0,
- pdata->micdet_cfg);
+ /* Microphone detection needs the WSEQ clock */
+ if (pdata->micdet_cfg)
+ snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
+ WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
- /* Microphone detection needs the WSEQ clock */
- if (pdata->micdet_cfg)
- snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
- WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
+ /* If microphone detection is enabled by pdata but
+ * detected via IRQ then interrupts can be lost before
+ * the machine driver has set up microphone detection
+ * IRQs as the IRQs are clear on read. The detection
+ * will be enabled when the machine driver configures.
+ */
+ WARN_ON(!mic_gpio && (pdata->micdet_cfg & WM8903_MICDET_ENA));
- /* If microphone detection is enabled by pdata but
- * detected via IRQ then interrupts can be lost before
- * the machine driver has set up microphone detection
- * IRQs as the IRQs are clear on read. The detection
- * will be enabled when the machine driver configures.
- */
- WARN_ON(!mic_gpio && (pdata->micdet_cfg & WM8903_MICDET_ENA));
+ wm8903->mic_delay = pdata->micdet_delay;
- wm8903->mic_delay = pdata->micdet_delay;
- }
-
if (wm8903->irq) {
- if (pdata && pdata->irq_active_low) {
+ if (pdata->irq_active_low) {
trigger = IRQF_TRIGGER_LOW;
irq_pol = WM8903_IRQ_POL;
} else {
@@ -2035,9 +2001,6 @@ static int wm8903_probe(struct snd_soc_codec *codec)
WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE,
WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE);
- snd_soc_add_controls(codec, wm8903_snd_controls,
- ARRAY_SIZE(wm8903_snd_controls));
-
wm8903_init_gpio(codec);
return ret;
@@ -2062,45 +2025,198 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8903 = {
.suspend = wm8903_suspend,
.resume = wm8903_resume,
.set_bias_level = wm8903_set_bias_level,
- .reg_cache_size = ARRAY_SIZE(wm8903_reg_defaults),
- .reg_word_size = sizeof(u16),
- .reg_cache_default = wm8903_reg_defaults,
- .volatile_register = wm8903_volatile_register,
.seq_notifier = wm8903_seq_notifier,
+ .controls = wm8903_snd_controls,
+ .num_controls = ARRAY_SIZE(wm8903_snd_controls),
.dapm_widgets = wm8903_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(wm8903_dapm_widgets),
.dapm_routes = wm8903_intercon,
.num_dapm_routes = ARRAY_SIZE(wm8903_intercon),
};
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static const struct regmap_config wm8903_regmap = {
+ .reg_bits = 8,
+ .val_bits = 16,
+
+ .max_register = WM8903_MAX_REGISTER,
+ .volatile_reg = wm8903_volatile_register,
+ .readable_reg = wm8903_readable_register,
+
+ .cache_type = REGCACHE_RBTREE,
+ .reg_defaults = wm8903_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(wm8903_reg_defaults),
+};
+
+static int wm8903_set_pdata_irq_trigger(struct i2c_client *i2c,
+ struct wm8903_platform_data *pdata)
+{
+ struct irq_data *irq_data = irq_get_irq_data(i2c->irq);
+ if (!irq_data) {
+ dev_err(&i2c->dev, "Invalid IRQ: %d\n",
+ i2c->irq);
+ return -EINVAL;
+ }
+
+ switch (irqd_get_trigger_type(irq_data)) {
+ case IRQ_TYPE_NONE:
+ default:
+ /*
+ * We assume the controller imposes no restrictions,
+ * so we are able to select active-high
+ */
+ /* Fall-through */
+ case IRQ_TYPE_LEVEL_HIGH:
+ pdata->irq_active_low = false;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ pdata->irq_active_low = true;
+ break;
+ }
+
+ return 0;
+}
+
+static int wm8903_set_pdata_from_of(struct i2c_client *i2c,
+ struct wm8903_platform_data *pdata)
+{
+ const struct device_node *np = i2c->dev.of_node;
+ u32 val32;
+ int i;
+
+ if (of_property_read_u32(np, "micdet-cfg", &val32) >= 0)
+ pdata->micdet_cfg = val32;
+
+ if (of_property_read_u32(np, "micdet-delay", &val32) >= 0)
+ pdata->micdet_delay = val32;
+
+ if (of_property_read_u32_array(np, "gpio-cfg", pdata->gpio_cfg,
+ ARRAY_SIZE(pdata->gpio_cfg)) >= 0) {
+ /*
+ * In device tree: 0 means "write 0",
+ * 0xffffffff means "don't touch".
+ *
+ * In platform data: 0 means "don't touch",
+ * 0x8000 means "write 0".
+ *
+ * Note: WM8903_GPIO_CONFIG_ZERO == 0x8000.
+ *
+ * Convert from DT to pdata representation here,
+ * so no other code needs to change.
+ */
+ for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
+ if (pdata->gpio_cfg[i] == 0) {
+ pdata->gpio_cfg[i] = WM8903_GPIO_CONFIG_ZERO;
+ } else if (pdata->gpio_cfg[i] == 0xffffffff) {
+ pdata->gpio_cfg[i] = 0;
+ } else if (pdata->gpio_cfg[i] > 0x7fff) {
+ dev_err(&i2c->dev, "Invalid gpio-cfg[%d] %x\n",
+ i, pdata->gpio_cfg[i]);
+ return -EINVAL;
+ }
+ }
+ }
+
+ return 0;
+}
+
static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
+ struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct wm8903_priv *wm8903;
+ unsigned int val;
int ret;
- wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
+ wm8903 = devm_kzalloc(&i2c->dev, sizeof(struct wm8903_priv),
+ GFP_KERNEL);
if (wm8903 == NULL)
return -ENOMEM;
+ wm8903->regmap = regmap_init_i2c(i2c, &wm8903_regmap);
+ if (IS_ERR(wm8903->regmap)) {
+ ret = PTR_ERR(wm8903->regmap);
+ dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
i2c_set_clientdata(i2c, wm8903);
wm8903->irq = i2c->irq;
+ /* If no platform data was supplied, create storage for defaults */
+ if (pdata) {
+ wm8903->pdata = pdata;
+ } else {
+ wm8903->pdata = devm_kzalloc(&i2c->dev,
+ sizeof(struct wm8903_platform_data),
+ GFP_KERNEL);
+ if (wm8903->pdata == NULL) {
+ dev_err(&i2c->dev, "Failed to allocate pdata\n");
+ return -ENOMEM;
+ }
+
+ if (i2c->irq) {
+ ret = wm8903_set_pdata_irq_trigger(i2c, wm8903->pdata);
+ if (ret != 0)
+ return ret;
+ }
+
+ if (i2c->dev.of_node) {
+ ret = wm8903_set_pdata_from_of(i2c, wm8903->pdata);
+ if (ret != 0)
+ return ret;
+ }
+ }
+
+ ret = regmap_read(wm8903->regmap, WM8903_SW_RESET_AND_ID, &val);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret);
+ goto err;
+ }
+ if (val != 0x8903) {
+ dev_err(&i2c->dev, "Device with ID %x is not a WM8903\n", val);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ ret = regmap_read(wm8903->regmap, WM8903_REVISION_NUMBER, &val);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to read chip revision: %d\n", ret);
+ goto err;
+ }
+ dev_info(&i2c->dev, "WM8903 revision %c\n",
+ (val & WM8903_CHIP_REV_MASK) + 'A');
+
+ /* Reset the device */
+ regmap_write(wm8903->regmap, WM8903_SW_RESET_AND_ID, 0x8903);
+
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8903, &wm8903_dai, 1);
- if (ret < 0)
- kfree(wm8903);
+ if (ret != 0)
+ goto err;
+
+ return 0;
+err:
+ regmap_exit(wm8903->regmap);
return ret;
}
static __devexit int wm8903_i2c_remove(struct i2c_client *client)
{
+ struct wm8903_priv *wm8903 = i2c_get_clientdata(client);
+
+ regmap_exit(wm8903->regmap);
snd_soc_unregister_codec(&client->dev);
- kfree(i2c_get_clientdata(client));
+
return 0;
}
+static const struct of_device_id wm8903_of_match[] = {
+ { .compatible = "wlf,wm8903", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, wm8903_of_match);
+
static const struct i2c_device_id wm8903_i2c_id[] = {
{ "wm8903", 0 },
{ }
@@ -2111,32 +2227,28 @@ static struct i2c_driver wm8903_i2c_driver = {
.driver = {
.name = "wm8903",
.owner = THIS_MODULE,
+ .of_match_table = wm8903_of_match,
},
.probe = wm8903_i2c_probe,
.remove = __devexit_p(wm8903_i2c_remove),
.id_table = wm8903_i2c_id,
};
-#endif
static int __init wm8903_modinit(void)
{
int ret = 0;
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
ret = i2c_add_driver(&wm8903_i2c_driver);
if (ret != 0) {
printk(KERN_ERR "Failed to register wm8903 I2C driver: %d\n",
ret);
}
-#endif
return ret;
}
module_init(wm8903_modinit);
static void __exit wm8903_exit(void)
{
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_del_driver(&wm8903_i2c_driver);
-#endif
}
module_exit(wm8903_exit);