diff options
Diffstat (limited to 'sound/soc/codecs/wm8915.c')
| -rw-r--r-- | sound/soc/codecs/wm8915.c | 2931 |
1 files changed, 2931 insertions, 0 deletions
diff --git a/sound/soc/codecs/wm8915.c b/sound/soc/codecs/wm8915.c new file mode 100644 index 00000000000..ccc9bd83279 --- /dev/null +++ b/sound/soc/codecs/wm8915.c @@ -0,0 +1,2931 @@ +/* + * wm8915.c - WM8915 audio codec interface + * + * Copyright 2011 Wolfson Microelectronics PLC. + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/gcd.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <sound/core.h> +#include <sound/jack.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <trace/events/asoc.h> + +#include <sound/wm8915.h> +#include "wm8915.h" + +#define WM8915_AIFS 2 + +#define HPOUT1L 1 +#define HPOUT1R 2 +#define HPOUT2L 4 +#define HPOUT2R 8 + +#define WM8915_NUM_SUPPLIES 6 +static const char *wm8915_supply_names[WM8915_NUM_SUPPLIES] = { + "DCVDD", + "DBVDD", + "AVDD1", + "AVDD2", + "CPVDD", + "MICVDD", +}; + +struct wm8915_priv { + struct snd_soc_codec *codec; + + int ldo1ena; + + int sysclk; + + int fll_src; + int fll_fref; + int fll_fout; + + struct completion fll_lock; + + u16 dcs_pending; + struct completion dcs_done; + + u16 hpout_ena; + u16 hpout_pending; + + struct regulator_bulk_data supplies[WM8915_NUM_SUPPLIES]; + struct notifier_block disable_nb[WM8915_NUM_SUPPLIES]; + + struct wm8915_pdata pdata; + + int rx_rate[WM8915_AIFS]; + + /* Platform dependant ReTune mobile configuration */ + int num_retune_mobile_texts; + const char **retune_mobile_texts; + int retune_mobile_cfg[2]; + struct soc_enum retune_mobile_enum; + + struct snd_soc_jack *jack; + bool detecting; + bool jack_mic; + wm8915_polarity_fn polarity_cb; + +#ifdef CONFIG_GPIOLIB + struct gpio_chip gpio_chip; +#endif +}; + +/* We can't use the same notifier block for more than one supply and + * there's no way I can see to get from a callback to the caller + * except container_of(). + */ +#define WM8915_REGULATOR_EVENT(n) \ +static int wm8915_regulator_event_##n(struct notifier_block *nb, \ + unsigned long event, void *data) \ +{ \ + struct wm8915_priv *wm8915 = container_of(nb, struct wm8915_priv, \ + disable_nb[n]); \ + if (event & REGULATOR_EVENT_DISABLE) { \ + wm8915->codec->cache_sync = 1; \ + } \ + return 0; \ +} + +WM8915_REGULATOR_EVENT(0) +WM8915_REGULATOR_EVENT(1) +WM8915_REGULATOR_EVENT(2) +WM8915_REGULATOR_EVENT(3) +WM8915_REGULATOR_EVENT(4) +WM8915_REGULATOR_EVENT(5) + +static const u16 wm8915_reg[WM8915_MAX_REGISTER] = { + [WM8915_SOFTWARE_RESET] = 0x8915, + [WM8915_POWER_MANAGEMENT_7] = 0x10, + [WM8915_DAC1_HPOUT1_VOLUME] = 0x88, + [WM8915_DAC2_HPOUT2_VOLUME] = 0x88, + [WM8915_DAC1_LEFT_VOLUME] = 0x2c0, + [WM8915_DAC1_RIGHT_VOLUME] = 0x2c0, + [WM8915_DAC2_LEFT_VOLUME] = 0x2c0, + [WM8915_DAC2_RIGHT_VOLUME] = 0x2c0, + [WM8915_OUTPUT1_LEFT_VOLUME] = 0x80, + [WM8915_OUTPUT1_RIGHT_VOLUME] = 0x80, + [WM8915_OUTPUT2_LEFT_VOLUME] = 0x80, + [WM8915_OUTPUT2_RIGHT_VOLUME] = 0x80, + [WM8915_MICBIAS_1] = 0x39, + [WM8915_MICBIAS_2] = 0x39, + [WM8915_LDO_1] = 0x3, + [WM8915_LDO_2] = 0x13, + [WM8915_ACCESSORY_DETECT_MODE_1] = 0x4, + [WM8915_HEADPHONE_DETECT_1] = 0x20, + [WM8915_MIC_DETECT_1] = 0x7600, + [WM8915_MIC_DETECT_2] = 0xbf, + [WM8915_CHARGE_PUMP_1] = 0x1f25, + [WM8915_CHARGE_PUMP_2] = 0xab19, + [WM8915_DC_SERVO_5] = 0x2a2a, + [WM8915_CONTROL_INTERFACE_1] = 0x8004, + [WM8915_CLOCKING_1] = 0x10, + [WM8915_AIF_RATE] = 0x83, + [WM8915_FLL_CONTROL_4] = 0x5dc0, + [WM8915_FLL_CONTROL_5] = 0xc84, + [WM8915_FLL_EFS_2] = 0x2, + [WM8915_AIF1_TX_LRCLK_1] = 0x80, + [WM8915_AIF1_TX_LRCLK_2] = 0x8, + [WM8915_AIF1_RX_LRCLK_1] = 0x80, + [WM8915_AIF1TX_DATA_CONFIGURATION_1] = 0x1818, + [WM8915_AIF1RX_DATA_CONFIGURATION] = 0x1818, + [WM8915_AIF1TX_TEST] = 0x7, + [WM8915_AIF2_TX_LRCLK_1] = 0x80, + [WM8915_AIF2_TX_LRCLK_2] = 0x8, + [WM8915_AIF2_RX_LRCLK_1] = 0x80, + [WM8915_AIF2TX_DATA_CONFIGURATION_1] = 0x1818, + [WM8915_AIF2RX_DATA_CONFIGURATION] = 0x1818, + [WM8915_AIF2TX_TEST] = 0x1, + [WM8915_DSP1_TX_LEFT_VOLUME] = 0xc0, + [WM8915_DSP1_TX_RIGHT_VOLUME] = 0xc0, + [WM8915_DSP1_RX_LEFT_VOLUME] = 0xc0, + [WM8915_DSP1_RX_RIGHT_VOLUME] = 0xc0, + [WM8915_DSP1_TX_FILTERS] = 0x2000, + [WM8915_DSP1_RX_FILTERS_1] = 0x200, + [WM8915_DSP1_RX_FILTERS_2] = 0x10, + [WM8915_DSP1_DRC_1] = 0x98, + [WM8915_DSP1_DRC_2] = 0x845, + [WM8915_DSP1_RX_EQ_GAINS_1] = 0x6318, + [WM8915_DSP1_RX_EQ_GAINS_2] = 0x6300, + [WM8915_DSP1_RX_EQ_BAND_1_A] = 0xfca, + [WM8915_DSP1_RX_EQ_BAND_1_B] = 0x400, + [WM8915_DSP1_RX_EQ_BAND_1_PG] = 0xd8, + [WM8915_DSP1_RX_EQ_BAND_2_A] = 0x1eb5, + [WM8915_DSP1_RX_EQ_BAND_2_B] = 0xf145, + [WM8915_DSP1_RX_EQ_BAND_2_C] = 0xb75, + [WM8915_DSP1_RX_EQ_BAND_2_PG] = 0x1c5, + [WM8915_DSP1_RX_EQ_BAND_3_A] = 0x1c58, + [WM8915_DSP1_RX_EQ_BAND_3_B] = 0xf373, + [WM8915_DSP1_RX_EQ_BAND_3_C] = 0xa54, + [WM8915_DSP1_RX_EQ_BAND_3_PG] = 0x558, + [WM8915_DSP1_RX_EQ_BAND_4_A] = 0x168e, + [WM8915_DSP1_RX_EQ_BAND_4_B] = 0xf829, + [WM8915_DSP1_RX_EQ_BAND_4_C] = 0x7ad, + [WM8915_DSP1_RX_EQ_BAND_4_PG] = 0x1103, + [WM8915_DSP1_RX_EQ_BAND_5_A] = 0x564, + [WM8915_DSP1_RX_EQ_BAND_5_B] = 0x559, + [WM8915_DSP1_RX_EQ_BAND_5_PG] = 0x4000, + [WM8915_DSP2_TX_LEFT_VOLUME] = 0xc0, + [WM8915_DSP2_TX_RIGHT_VOLUME] = 0xc0, + [WM8915_DSP2_RX_LEFT_VOLUME] = 0xc0, + [WM8915_DSP2_RX_RIGHT_VOLUME] = 0xc0, + [WM8915_DSP2_TX_FILTERS] = 0x2000, + [WM8915_DSP2_RX_FILTERS_1] = 0x200, + [WM8915_DSP2_RX_FILTERS_2] = 0x10, + [WM8915_DSP2_DRC_1] = 0x98, + [WM8915_DSP2_DRC_2] = 0x845, + [WM8915_DSP2_RX_EQ_GAINS_1] = 0x6318, + [WM8915_DSP2_RX_EQ_GAINS_2] = 0x6300, + [WM8915_DSP2_RX_EQ_BAND_1_A] = 0xfca, + [WM8915_DSP2_RX_EQ_BAND_1_B] = 0x400, + [WM8915_DSP2_RX_EQ_BAND_1_PG] = 0xd8, + [WM8915_DSP2_RX_EQ_BAND_2_A] = 0x1eb5, + [WM8915_DSP2_RX_EQ_BAND_2_B] = 0xf145, + [WM8915_DSP2_RX_EQ_BAND_2_C] = 0xb75, + [WM8915_DSP2_RX_EQ_BAND_2_PG] = 0x1c5, + [WM8915_DSP2_RX_EQ_BAND_3_A] = 0x1c58, + [WM8915_DSP2_RX_EQ_BAND_3_B] = 0xf373, + [WM8915_DSP2_RX_EQ_BAND_3_C] = 0xa54, + [WM8915_DSP2_RX_EQ_BAND_3_PG] = 0x558, + [WM8915_DSP2_RX_EQ_BAND_4_A] = 0x168e, + [WM8915_DSP2_RX_EQ_BAND_4_B] = 0xf829, + [WM8915_DSP2_RX_EQ_BAND_4_C] = 0x7ad, + [WM8915_DSP2_RX_EQ_BAND_4_PG] = 0x1103, + [WM8915_DSP2_RX_EQ_BAND_5_A] = 0x564, + [WM8915_DSP2_RX_EQ_BAND_5_B] = 0x559, + [WM8915_DSP2_RX_EQ_BAND_5_PG] = 0x4000, + [WM8915_OVERSAMPLING] = 0xd, + [WM8915_SIDETONE] = 0x1040, + [WM8915_GPIO_1] = 0xa101, + [WM8915_GPIO_2] = 0xa101, + [WM8915_GPIO_3] = 0xa101, + [WM8915_GPIO_4] = 0xa101, + [WM8915_GPIO_5] = 0xa101, + [WM8915_PULL_CONTROL_2] = 0x140, + [WM8915_INTERRUPT_STATUS_1_MASK] = 0x1f, + [WM8915_INTERRUPT_STATUS_2_MASK] = 0x1ecf, + [WM8915_RIGHT_PDM_SPEAKER] = 0x1, + [WM8915_PDM_SPEAKER_MUTE_SEQUENCE] = 0x69, + [WM8915_PDM_SPEAKER_VOLUME] = 0x66, + [WM8915_WRITE_SEQUENCER_0] = 0x1, + [WM8915_WRITE_SEQUENCER_1] = 0x1, + [WM8915_WRITE_SEQUENCER_3] = 0x6, + [WM8915_WRITE_SEQUENCER_4] = 0x40, + [WM8915_WRITE_SEQUENCER_5] = 0x1, + [WM8915_WRITE_SEQUENCER_6] = 0xf, + [WM8915_WRITE_SEQUENCER_7] = 0x6, + [WM8915_WRITE_SEQUENCER_8] = 0x1, + [WM8915_WRITE_SEQUENCER_9] = 0x3, + [WM8915_WRITE_SEQUENCER_10] = 0x104, + [WM8915_WRITE_SEQUENCER_12] = 0x60, + [WM8915_WRITE_SEQUENCER_13] = 0x11, + [WM8915_WRITE_SEQUENCER_14] = 0x401, + [WM8915_WRITE_SEQUENCER_16] = 0x50, + [WM8915_WRITE_SEQUENCER_17] = 0x3, + [WM8915_WRITE_SEQUENCER_18] = 0x100, + [WM8915_WRITE_SEQUENCER_20] = 0x51, + [WM8915_WRITE_SEQUENCER_21] = 0x3, + [WM8915_WRITE_SEQUENCER_22] = 0x104, + [WM8915_WRITE_SEQUENCER_23] = 0xa, + [WM8915_WRITE_SEQUENCER_24] = 0x60, + [WM8915_WRITE_SEQUENCER_25] = 0x3b, + [WM8915_WRITE_SEQUENCER_26] = 0x502, + [WM8915_WRITE_SEQUENCER_27] = 0x100, + [WM8915_WRITE_SEQUENCER_28] = 0x2fff, + [WM8915_WRITE_SEQUENCER_32] = 0x2fff, + [WM8915_WRITE_SEQUENCER_36] = 0x2fff, + [WM8915_WRITE_SEQUENCER_40] = 0x2fff, + [WM8915_WRITE_SEQUENCER_44] = 0x2fff, + [WM8915_WRITE_SEQUENCER_48] = 0x2fff, + [WM8915_WRITE_SEQUENCER_52] = 0x2fff, + [WM8915_WRITE_SEQUENCER_56] = 0x2fff, + [WM8915_WRITE_SEQUENCER_60] = 0x2fff, + [WM8915_WRITE_SEQUENCER_64] = 0x1, + [WM8915_WRITE_SEQUENCER_65] = 0x1, + [WM8915_WRITE_SEQUENCER_67] = 0x6, + [WM8915_WRITE_SEQUENCER_68] = 0x40, + [WM8915_WRITE_SEQUENCER_69] = 0x1, + [WM8915_WRITE_SEQUENCER_70] = 0xf, + [WM8915_WRITE_SEQUENCER_71] = 0x6, + [WM8915_WRITE_SEQUENCER_72] = 0x1, + [WM8915_WRITE_SEQUENCER_73] = 0x3, + [WM8915_WRITE_SEQUENCER_74] = 0x104, + [WM8915_WRITE_SEQUENCER_76] = 0x60, + [WM8915_WRITE_SEQUENCER_77] = 0x11, + [WM8915_WRITE_SEQUENCER_78] = 0x401, + [WM8915_WRITE_SEQUENCER_80] = 0x50, + [WM8915_WRITE_SEQUENCER_81] = 0x3, + [WM8915_WRITE_SEQUENCER_82] = 0x100, + [WM8915_WRITE_SEQUENCER_84] = 0x60, + [WM8915_WRITE_SEQUENCER_85] = 0x3b, + [WM8915_WRITE_SEQUENCER_86] = 0x502, + [WM8915_WRITE_SEQUENCER_87] = 0x100, + [WM8915_WRITE_SEQUENCER_88] = 0x2fff, + [WM8915_WRITE_SEQUENCER_92] = 0x2fff, + [WM8915_WRITE_SEQUENCER_96] = 0x2fff, + [WM8915_WRITE_SEQUENCER_100] = 0x2fff, + [WM8915_WRITE_SEQUENCER_104] = 0x2fff, + [WM8915_WRITE_SEQUENCER_108] = 0x2fff, + [WM8915_WRITE_SEQUENCER_112] = 0x2fff, + [WM8915_WRITE_SEQUENCER_116] = 0x2fff, + [WM8915_WRITE_SEQUENCER_120] = 0x2fff, + [WM8915_WRITE_SEQUENCER_124] = 0x2fff, + [WM8915_WRITE_SEQUENCER_128] = 0x1, + [WM8915_WRITE_SEQUENCER_129] = 0x1, + [WM8915_WRITE_SEQUENCER_131] = 0x6, + [WM8915_WRITE_SEQUENCER_132] = 0x40, + [WM8915_WRITE_SEQUENCER_133] = 0x1, + [WM8915_WRITE_SEQUENCER_134] = 0xf, + [WM8915_WRITE_SEQUENCER_135] = 0x6, + [WM8915_WRITE_SEQUENCER_136] = 0x1, + [WM8915_WRITE_SEQUENCER_137] = 0x3, + [WM8915_WRITE_SEQUENCER_138] = 0x106, + [WM8915_WRITE_SEQUENCER_140] = 0x61, + [WM8915_WRITE_SEQUENCER_141] = 0x11, + [WM8915_WRITE_SEQUENCER_142] = 0x401, + [WM8915_WRITE_SEQUENCER_144] = 0x50, + [WM8915_WRITE_SEQUENCER_145] = 0x3, + [WM8915_WRITE_SEQUENCER_146] = 0x102, + [WM8915_WRITE_SEQUENCER_148] = 0x51, + [WM8915_WRITE_SEQUENCER_149] = 0x3, + [WM8915_WRITE_SEQUENCER_150] = 0x106, + [WM8915_WRITE_SEQUENCER_151] = 0xa, + [WM8915_WRITE_SEQUENCER_152] = 0x61, + [WM8915_WRITE_SEQUENCER_153] = 0x3b, + [WM8915_WRITE_SEQUENCER_154] = 0x502, + [WM8915_WRITE_SEQUENCER_155] = 0x100, + [WM8915_WRITE_SEQUENCER_156] = 0x2fff, + [WM8915_WRITE_SEQUENCER_160] = 0x2fff, + [WM8915_WRITE_SEQUENCER_164] = 0x2fff, + [WM8915_WRITE_SEQUENCER_168] = 0x2fff, + [WM8915_WRITE_SEQUENCER_172] = 0x2fff, + [WM8915_WRITE_SEQUENCER_176] = 0x2fff, + [WM8915_WRITE_SEQUENCER_180] = 0x2fff, + [WM8915_WRITE_SEQUENCER_184] = 0x2fff, + [WM8915_WRITE_SEQUENCER_188] = 0x2fff, + [WM8915_WRITE_SEQUENCER_192] = 0x1, + [WM8915_WRITE_SEQUENCER_193] = 0x1, + [WM8915_WRITE_SEQUENCER_195] = 0x6, + [WM8915_WRITE_SEQUENCER_196] = 0x40, + [WM8915_WRITE_SEQUENCER_197] = 0x1, + [WM8915_WRITE_SEQUENCER_198] = 0xf, + [WM8915_WRITE_SEQUENCER_199] = 0x6, + [WM8915_WRITE_SEQUENCER_200] = 0x1, + [WM8915_WRITE_SEQUENCER_201] = 0x3, + [WM8915_WRITE_SEQUENCER_202] = 0x106, + [WM8915_WRITE_SEQUENCER_204] = 0x61, + [WM8915_WRITE_SEQUENCER_205] = 0x11, + [WM8915_WRITE_SEQUENCER_206] = 0x401, + [WM8915_WRITE_SEQUENCER_208] = 0x50, + [WM8915_WRITE_SEQUENCER_209] = 0x3, + [WM8915_WRITE_SEQUENCER_210] = 0x102, + [WM8915_WRITE_SEQUENCER_212] = 0x61, + [WM8915_WRITE_SEQUENCER_213] = 0x3b, + [WM8915_WRITE_SEQUENCER_214] = 0x502, + [WM8915_WRITE_SEQUENCER_215] = 0x100, + [WM8915_WRITE_SEQUENCER_216] = 0x2fff, + [WM8915_WRITE_SEQUENCER_220] = 0x2fff, + [WM8915_WRITE_SEQUENCER_224] = 0x2fff, + [WM8915_WRITE_SEQUENCER_228] = 0x2fff, + [WM8915_WRITE_SEQUENCER_232] = 0x2fff, + [WM8915_WRITE_SEQUENCER_236] = 0x2fff, + [WM8915_WRITE_SEQUENCER_240] = 0x2fff, + [WM8915_WRITE_SEQUENCER_244] = 0x2fff, + [WM8915_WRITE_SEQUENCER_248] = 0x2fff, + [WM8915_WRITE_SEQUENCER_252] = 0x2fff, + [WM8915_WRITE_SEQUENCER_256] = 0x60, + [WM8915_WRITE_SEQUENCER_258] = 0x601, + [WM8915_WRITE_SEQUENCER_260] = 0x50, + [WM8915_WRITE_SEQUENCER_262] = 0x100, + [WM8915_WRITE_SEQUENCER_264] = 0x1, + [WM8915_WRITE_SEQUENCER_266] = 0x104, + [WM8915_WRITE_SEQUENCER_267] = 0x100, + [WM8915_WRITE_SEQUENCER_268] = 0x2fff, + [WM8915_WRITE_SEQUENCER_272] = 0x2fff, + [WM8915_WRITE_SEQUENCER_276] = 0x2fff, + [WM8915_WRITE_SEQUENCER_280] = 0x2fff, + [WM8915_WRITE_SEQUENCER_284] = 0x2fff, + [WM8915_WRITE_SEQUENCER_288] = 0x2fff, + [WM8915_WRITE_SEQUENCER_292] = 0x2fff, + [WM8915_WRITE_SEQUENCER_296] = 0x2fff, + [WM8915_WRITE_SEQUENCER_300] = 0x2fff, + [WM8915_WRITE_SEQUENCER_304] = 0x2fff, + [WM8915_WRITE_SEQUENCER_308] = 0x2fff, + [WM8915_WRITE_SEQUENCER_312] = 0x2fff, + [WM8915_WRITE_SEQUENCER_316] = 0x2fff, + [WM8915_WRITE_SEQUENCER_320] = 0x61, + [WM8915_WRITE_SEQUENCER_322] = 0x601, + [WM8915_WRITE_SEQUENCER_324] = 0x50, + [WM8915_WRITE_SEQUENCER_326] = 0x102, + [WM8915_WRITE_SEQUENCER_328] = 0x1, + [WM8915_WRITE_SEQUENCER_330] = 0x106, + [WM8915_WRITE_SEQUENCER_331] = 0x100, + [WM8915_WRITE_SEQUENCER_332] = 0x2fff, + [WM8915_WRITE_SEQUENCER_336] = 0x2fff, + [WM8915_WRITE_SEQUENCER_340] = 0x2fff, + [WM8915_WRITE_SEQUENCER_344] = 0x2fff, + [WM8915_WRITE_SEQUENCER_348] = 0x2fff, + [WM8915_WRITE_SEQUENCER_352] = 0x2fff, + [WM8915_WRITE_SEQUENCER_356] = 0x2fff, + [WM8915_WRITE_SEQUENCER_360] = 0x2fff, + [WM8915_WRITE_SEQUENCER_364] = 0x2fff, + [WM8915_WRITE_SEQUENCER_368] = 0x2fff, + [WM8915_WRITE_SEQUENCER_372] = 0x2fff, + [WM8915_WRITE_SEQUENCER_376] = 0x2fff, + [WM8915_WRITE_SEQUENCER_380] = 0x2fff, + [WM8915_WRITE_SEQUENCER_384] = 0x60, + [WM8915_WRITE_SEQUENCER_386] = 0x601, + [WM8915_WRITE_SEQUENCER_388] = 0x61, + [WM8915_WRITE_SEQUENCER_390] = 0x601, + [WM8915_WRITE_SEQUENCER_392] = 0x50, + [WM8915_WRITE_SEQUENCER_394] = 0x300, + [WM8915_WRITE_SEQUENCER_396] = 0x1, + [WM8915_WRITE_SEQUENCER_398] = 0x304, + [WM8915_WRITE_SEQUENCER_400] = 0x40, + [WM8915_WRITE_SEQUENCER_402] = 0xf, + [WM8915_WRITE_SEQUENCER_404] = 0x1, + [WM8915_WRITE_SEQUENCER_407] = 0x100, +}; + +static const DECLARE_TLV_DB_SCALE(inpga_tlv, 0, 100, 0); +static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 150, 0); +static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1); +static const DECLARE_TLV_DB_SCALE(out_digital_tlv, -1200, 150, 0); +static const DECLARE_TLV_DB_SCALE(out_tlv, -900, 75, 0); +static const DECLARE_TLV_DB_SCALE(spk_tlv, -900, 150, 0); +static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0); + +static const char *sidetone_hpf_text[] = { + "2.9kHz", "1.5kHz", "735Hz", "403Hz", "196Hz", "98Hz", "49Hz" +}; + +static const struct soc_enum sidetone_hpf = + SOC_ENUM_SINGLE(WM8915_SIDETONE, 7, 6, sidetone_hpf_text); + +static const char *hpf_mode_text[] = { + "HiFi", "Custom", "Voice" +}; + +static const struct soc_enum dsp1tx_hpf_mode = + SOC_ENUM_SINGLE(WM8915_DSP1_TX_FILTERS, 3, 3, hpf_mode_text); + +static const struct soc_enum dsp2tx_hpf_mode = + SOC_ENUM_SINGLE(WM8915_DSP2_TX_FILTERS, 3, 3, hpf_mode_text); + +static const char *hpf_cutoff_text[] = { + "50Hz", "75Hz", "100Hz", "150Hz", "200Hz", "300Hz", "400Hz" +}; + +static const struct soc_enum dsp1tx_hpf_cutoff = + SOC_ENUM_SINGLE(WM8915_DSP1_TX_FILTERS, 0, 7, hpf_cutoff_text); + +static const struct soc_enum dsp2tx_hpf_cutoff = + SOC_ENUM_SINGLE(WM8915_DSP2_TX_FILTERS, 0, 7, hpf_cutoff_text); + +static void wm8915_set_retune_mobile(struct snd_soc_codec *codec, int block) +{ + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + struct wm8915_pdata *pdata = &wm8915->pdata; + int base, best, best_val, save, i, cfg, iface; + + if (!wm8915->num_retune_mobile_texts) + return; + + switch (block) { + case 0: + base = WM8915_DSP1_RX_EQ_GAINS_1; + if (snd_soc_read(codec, WM8915_POWER_MANAGEMENT_8) & + WM8915_DSP1RX_SRC) + iface = 1; + else + iface = 0; + break; + case 1: + base = WM8915_DSP1_RX_EQ_GAINS_2; + if (snd_soc_read(codec, WM8915_POWER_MANAGEMENT_8) & + WM8915_DSP2RX_SRC) + iface = 1; + else + iface = 0; + break; + default: + return; + } + + /* Find the version of the currently selected configuration + * with the nearest sample rate. */ + cfg = wm8915->retune_mobile_cfg[block]; + best = 0; + best_val = INT_MAX; + for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) { + if (strcmp(pdata->retune_mobile_cfgs[i].name, + wm8915->retune_mobile_texts[cfg]) == 0 && + abs(pdata->retune_mobile_cfgs[i].rate + - wm8915->rx_rate[iface]) < best_val) { + best = i; + best_val = abs(pdata->retune_mobile_cfgs[i].rate + - wm8915->rx_rate[iface]); + } + } + + dev_dbg(codec->dev, "ReTune Mobile %d %s/%dHz for %dHz sample rate\n", + block, + pdata->retune_mobile_cfgs[best].name, + pdata->retune_mobile_cfgs[best].rate, + wm8915->rx_rate[iface]); + + /* The EQ will be disabled while reconfiguring it, remember the + * current configuration. + */ + save = snd_soc_read(codec, base); + save &= WM8915_DSP1RX_EQ_ENA; + + for (i = 0; i < ARRAY_SIZE(pdata->retune_mobile_cfgs[best].regs); i++) + snd_soc_update_bits(codec, base + i, 0xffff, + pdata->retune_mobile_cfgs[best].regs[i]); + + snd_soc_update_bits(codec, base, WM8915_DSP1RX_EQ_ENA, save); +} + +/* Icky as hell but saves code duplication */ +static int wm8915_get_retune_mobile_block(const char *name) +{ + if (strcmp(name, "DSP1 EQ Mode") == 0) + return 0; + if (strcmp(name, "DSP2 EQ Mode") == 0) + return 1; + return -EINVAL; +} + +static int wm8915_put_retune_mobile_enum(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + struct wm8915_pdata *pdata = &wm8915->pdata; + int block = wm8915_get_retune_mobile_block(kcontrol->id.name); + int value = ucontrol->value.integer.value[0]; + + if (block < 0) + return block; + + if (value >= pdata->num_retune_mobile_cfgs) + return -EINVAL; + + wm8915->retune_mobile_cfg[block] = value; + + wm8915_set_retune_mobile(codec, block); + + return 0; +} + +static int wm8915_get_retune_mobile_enum(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + int block = wm8915_get_retune_mobile_block(kcontrol->id.name); + + ucontrol->value.enumerated.item[0] = wm8915->retune_mobile_cfg[block]; + + return 0; +} + +static const struct snd_kcontrol_new wm8915_snd_controls[] = { +SOC_DOUBLE_R_TLV("Capture Volume", WM8915_LEFT_LINE_INPUT_VOLUME, + WM8915_RIGHT_LINE_INPUT_VOLUME, 0, 31, 0, inpga_tlv), +SOC_DOUBLE_R("Capture ZC Switch", WM8915_LEFT_LINE_INPUT_VOLUME, + WM8915_RIGHT_LINE_INPUT_VOLUME, 5, 1, 0), + +SOC_DOUBLE_TLV("DAC1 Sidetone Volume", WM8915_DAC1_MIXER_VOLUMES, + 0, 5, 24, 0, sidetone_tlv), +SOC_DOUBLE_TLV("DAC2 Sidetone Volume", WM8915_DAC2_MIXER_VOLUMES, + 0, 5, 24, 0, sidetone_tlv), +SOC_SINGLE("Sidetone LPF Switch", WM8915_SIDETONE, 12, 1, 0), +SOC_ENUM("Sidetone HPF Cut-off", sidetone_hpf), +SOC_SINGLE("Sidetone HPF Switch", WM8915_SIDETONE, 6, 1, 0), + +SOC_DOUBLE_R_TLV("DSP1 Capture Volume", WM8915_DSP1_TX_LEFT_VOLUME, + WM8915_DSP1_TX_RIGHT_VOLUME, 1, 96, 0, digital_tlv), +SOC_DOUBLE_R_TLV("DSP2 Capture Volume", WM8915_DSP2_TX_LEFT_VOLUME, + WM8915_DSP2_TX_RIGHT_VOLUME, 1, 96, 0, digital_tlv), + +SOC_SINGLE("DSP1 Capture Notch Filter Switch", WM8915_DSP1_TX_FILTERS, + 13, 1, 0), +SOC_DOUBLE("DSP1 Capture HPF Switch", WM8915_DSP1_TX_FILTERS, 12, 11, 1, 0), +SOC_ENUM("DSP1 Capture HPF Mode", dsp1tx_hpf_mode), +SOC_ENUM("DSP1 Capture HPF Cutoff", dsp1tx_hpf_cutoff), + +SOC_SINGLE("DSP2 Capture Notch Filter Switch", WM8915_DSP2_TX_FILTERS, + 13, 1, 0), +SOC_DOUBLE("DSP2 Capture HPF Switch", WM8915_DSP2_TX_FILTERS, 12, 11, 1, 0), +SOC_ENUM("DSP2 Capture HPF Mode", dsp2tx_hpf_mode), +SOC_ENUM("DSP2 Capture HPF Cutoff", dsp2tx_hpf_cutoff), + +SOC_DOUBLE_R_TLV("DSP1 Playback Volume", WM8915_DSP1_RX_LEFT_VOLUME, + WM8915_DSP1_RX_RIGHT_VOLUME, 1, 112, 0, digital_tlv), +SOC_SINGLE("DSP1 Playback Switch", WM8915_DSP1_RX_FILTERS_1, 9, 1, 1), + +SOC_DOUBLE_R_TLV("DSP2 Playback Volume", WM8915_DSP2_RX_LEFT_VOLUME, + WM8915_DSP2_RX_RIGHT_VOLUME, 1, 112, 0, digital_tlv), +SOC_SINGLE("DSP2 Playback Switch", WM8915_DSP2_RX_FILTERS_1, 9, 1, 1), + +SOC_DOUBLE_R_TLV("DAC1 Volume", WM8915_DAC1_LEFT_VOLUME, + WM8915_DAC1_RIGHT_VOLUME, 1, 112, 0, digital_tlv), +SOC_DOUBLE_R("DAC1 Switch", WM8915_DAC1_LEFT_VOLUME, + WM8915_DAC1_RIGHT_VOLUME, 9, 1, 1), + +SOC_DOUBLE_R_TLV("DAC2 Volume", WM8915_DAC2_LEFT_VOLUME, + WM8915_DAC2_RIGHT_VOLUME, 1, 112, 0, digital_tlv), +SOC_DOUBLE_R("DAC2 Switch", WM8915_DAC2_LEFT_VOLUME, + WM8915_DAC2_RIGHT_VOLUME, 9, 1, 1), + +SOC_SINGLE("Speaker High Performance Switch", WM8915_OVERSAMPLING, 3, 1, 0), +SOC_SINGLE("DMIC High Performance Switch", WM8915_OVERSAMPLING, 2, 1, 0), +SOC_SINGLE("ADC High Performance Switch", WM8915_OVERSAMPLING, 1, 1, 0), +SOC_SINGLE("DAC High Performance Switch", WM8915_OVERSAMPLING, 0, 1, 0), + +SOC_SINGLE("DAC Soft Mute Switch", WM8915_DAC_SOFTMUTE, 1, 1, 0), +SOC_SINGLE("DAC Slow Soft Mute Switch", WM8915_DAC_SOFTMUTE, 0, 1, 0), + +SOC_DOUBLE_TLV("Digital Output 1 Volume", WM8915_DAC1_HPOUT1_VOLUME, 0, 4, + 8, 0, out_digital_tlv), +SOC_DOUBLE_TLV("Digital Output 2 Volume", WM8915_DAC2_HPOUT2_VOLUME, 0, 4, + 8, 0, out_digital_tlv), + +SOC_DOUBLE_R_TLV("Output 1 Volume", WM8915_OUTPUT1_LEFT_VOLUME, + WM8915_OUTPUT1_RIGHT_VOLUME, 0, 12, 0, out_tlv), +SOC_DOUBLE_R("Output 1 ZC Switch", WM8915_OUTPUT1_LEFT_VOLUME, + WM8915_OUTPUT1_RIGHT_VOLUME, 7, 1, 0), + +SOC_DOUBLE_R_TLV("Output 2 Volume", WM8915_OUTPUT2_LEFT_VOLUME, + WM8915_OUTPUT2_RIGHT_VOLUME, 0, 12, 0, out_tlv), +SOC_DOUBLE_R("Output 2 ZC Switch", WM8915_OUTPUT2_LEFT_VOLUME, + WM8915_OUTPUT2_RIGHT_VOLUME, 7, 1, 0), + +SOC_DOUBLE_TLV("Speaker Volume", WM8915_PDM_SPEAKER_VOLUME, 0, 4, 8, 0, + spk_tlv), +SOC_DOUBLE_R("Speaker Switch", WM8915_LEFT_PDM_SPEAKER, + WM8915_RIGHT_PDM_SPEAKER, 3, 1, 1), +SOC_DOUBLE_R("Speaker ZC Switch", WM8915_LEFT_PDM_SPEAKER, + WM8915_RIGHT_PDM_SPEAKER, 2, 1, 0), + +SOC_SINGLE("DSP1 EQ Switch", WM8915_DSP1_RX_EQ_GAINS_1, 0, 1, 0), +SOC_SINGLE("DSP2 EQ Switch", WM8915_DSP2_RX_EQ_GAINS_1, 0, 1, 0), +}; + +static const struct snd_kcontrol_new wm8915_eq_controls[] = { +SOC_SINGLE_TLV("DSP1 EQ B1 Volume", WM8915_DSP1_RX_EQ_GAINS_1, 11, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP1 EQ B2 Volume", WM8915_DSP1_RX_EQ_GAINS_1, 6, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP1 EQ B3 Volume", WM8915_DSP1_RX_EQ_GAINS_1, 1, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP1 EQ B4 Volume", WM8915_DSP1_RX_EQ_GAINS_2, 11, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP1 EQ B5 Volume", WM8915_DSP1_RX_EQ_GAINS_2, 6, 31, 0, + eq_tlv), + +SOC_SINGLE_TLV("DSP2 EQ B1 Volume", WM8915_DSP2_RX_EQ_GAINS_1, 11, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP2 EQ B2 Volume", WM8915_DSP2_RX_EQ_GAINS_1, 6, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP2 EQ B3 Volume", WM8915_DSP2_RX_EQ_GAINS_1, 1, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP2 EQ B4 Volume", WM8915_DSP2_RX_EQ_GAINS_2, 11, 31, 0, + eq_tlv), +SOC_SINGLE_TLV("DSP2 EQ B5 Volume", WM8915_DSP2_RX_EQ_GAINS_2, 6, 31, 0, + eq_tlv), +}; + +static int cp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + switch (event) { + case SND_SOC_DAPM_POST_PMU: + msleep(5); + break; + default: + BUG(); + return -EINVAL; + } + + return 0; +} + +static int rmv_short_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(w->codec); + + /* Record which outputs we enabled */ + switch (event) { + case SND_SOC_DAPM_PRE_PMD: + wm8915->hpout_pending &= ~w->shift; + break; + case SND_SOC_DAPM_PRE_PMU: + wm8915->hpout_pending |= w->shift; + break; + default: + BUG(); + return -EINVAL; + } + + return 0; +} + +static void wait_for_dc_servo(struct snd_soc_codec *codec, u16 mask) +{ + struct i2c_client *i2c = to_i2c_client(codec->dev); + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + int i, ret; + unsigned long timeout = 200; + + snd_soc_write(codec, WM8915_DC_SERVO_2, mask); + + /* Use the interrupt if possible */ + do { + if (i2c->irq) { + timeout = wait_for_completion_timeout(&wm8915->dcs_done, + msecs_to_jiffies(200)); + if (timeout == 0) + dev_err(codec->dev, "DC servo timed out\n"); + + } else { + msleep(1); + if (--i) { + timeout = 0; + break; + } + } + + ret = snd_soc_read(codec, WM8915_DC_SERVO_2); + dev_dbg(codec->dev, "DC servo state: %x\n", ret); + } while (ret & mask); + + if (timeout == 0) + dev_err(codec->dev, "DC servo timed out for %x\n", mask); + else + dev_dbg(codec->dev, "DC servo complete for %x\n", mask); +} + +static void wm8915_seq_notifier(struct snd_soc_dapm_context *dapm, + enum snd_soc_dapm_type event, int subseq) +{ + struct snd_soc_codec *codec = container_of(dapm, + struct snd_soc_codec, dapm); + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + u16 val, mask; + + /* Complete any pending DC servo starts */ + if (wm8915->dcs_pending) { + dev_dbg(codec->dev, "Starting DC servo for %x\n", + wm8915->dcs_pending); + + /* Trigger a startup sequence */ + wait_for_dc_servo(codec, wm8915->dcs_pending + << WM8915_DCS_TRIG_STARTUP_0_SHIFT); + + wm8915->dcs_pending = 0; + } + + if (wm8915->hpout_pending != wm8915->hpout_ena) { + dev_dbg(codec->dev, "Applying RMV_SHORTs %x->%x\n", + wm8915->hpout_ena, wm8915->hpout_pending); + + val = 0; + mask = 0; + if (wm8915->hpout_pending & HPOUT1L) { + val |= WM8915_HPOUT1L_RMV_SHORT; + mask |= WM8915_HPOUT1L_RMV_SHORT; + } else { + mask |= WM8915_HPOUT1L_RMV_SHORT | + WM8915_HPOUT1L_OUTP | + WM8915_HPOUT1L_DLY; + } + + if (wm8915->hpout_pending & HPOUT1R) { + val |= WM8915_HPOUT1R_RMV_SHORT; + mask |= WM8915_HPOUT1R_RMV_SHORT; + } else { + mask |= WM8915_HPOUT1R_RMV_SHORT | + WM8915_HPOUT1R_OUTP | + WM8915_HPOUT1R_DLY; + } + + snd_soc_update_bits(codec, WM8915_ANALOGUE_HP_1, mask, val); + + val = 0; + mask = 0; + if (wm8915->hpout_pending & HPOUT2L) { + val |= WM8915_HPOUT2L_RMV_SHORT; + mask |= WM8915_HPOUT2L_RMV_SHORT; + } else { + mask |= WM8915_HPOUT2L_RMV_SHORT | + WM8915_HPOUT2L_OUTP | + WM8915_HPOUT2L_DLY; + } + + if (wm8915->hpout_pending & HPOUT2R) { + val |= WM8915_HPOUT2R_RMV_SHORT; + mask |= WM8915_HPOUT2R_RMV_SHORT; + } else { + mask |= WM8915_HPOUT2R_RMV_SHORT | + WM8915_HPOUT2R_OUTP | + WM8915_HPOUT2R_DLY; + } + + snd_soc_update_bits(codec, WM8915_ANALOGUE_HP_2, mask, val); + + wm8915->hpout_ena = wm8915->hpout_pending; + } +} + +static int dcs_start(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(w->codec); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + wm8915->dcs_pending |= 1 << w->shift; + break; + default: + BUG(); + return -EINVAL; + } + + return 0; +} + +static const char *sidetone_text[] = { + "IN1", "IN2", +}; + +static const struct soc_enum left_sidetone_enum = + SOC_ENUM_SINGLE(WM8915_SIDETONE, 0, 2, sidetone_text); + +static const struct snd_kcontrol_new left_sidetone = + SOC_DAPM_ENUM("Left Sidetone", left_sidetone_enum); + +static const struct soc_enum right_sidetone_enum = + SOC_ENUM_SINGLE(WM8915_SIDETONE, 1, 2, sidetone_text); + +static const struct snd_kcontrol_new right_sidetone = + SOC_DAPM_ENUM("Right Sidetone", right_sidetone_enum); + +static const char *spk_text[] = { + "DAC1L", "DAC1R", "DAC2L", "DAC2R" +}; + +static const struct soc_enum spkl_enum = + SOC_ENUM_SINGLE(WM8915_LEFT_PDM_SPEAKER, 0, 4, spk_text); + +static const struct snd_kcontrol_new spkl_mux = + SOC_DAPM_ENUM("SPKL", spkl_enum); + +static const struct soc_enum spkr_enum = + SOC_ENUM_SINGLE(WM8915_RIGHT_PDM_SPEAKER, 0, 4, spk_text); + +static const struct snd_kcontrol_new spkr_mux = + SOC_DAPM_ENUM("SPKR", spkr_enum); + +static const char *dsp1rx_text[] = { + "AIF1", "AIF2" +}; + +static const struct soc_enum dsp1rx_enum = + SOC_ENUM_SINGLE(WM8915_POWER_MANAGEMENT_8, 0, 2, dsp1rx_text); + +static const struct snd_kcontrol_new dsp1rx = + SOC_DAPM_ENUM("DSP1RX", dsp1rx_enum); + +static const char *dsp2rx_text[] = { + "AIF2", "AIF1" +}; + +static const struct soc_enum dsp2rx_enum = + SOC_ENUM_SINGLE(WM8915_POWER_MANAGEMENT_8, 4, 2, dsp2rx_text); + +static const struct snd_kcontrol_new dsp2rx = + SOC_DAPM_ENUM("DSP2RX", dsp2rx_enum); + +static const char *aif2tx_text[] = { + "DSP2", "DSP1", "AIF1" +}; + +static const struct soc_enum aif2tx_enum = + SOC_ENUM_SINGLE(WM8915_POWER_MANAGEMENT_8, 6, 3, aif2tx_text); + +static const struct snd_kcontrol_new aif2tx = + SOC_DAPM_ENUM("AIF2TX", aif2tx_enum); + +static const char *inmux_text[] = { + "ADC", "DMIC1", "DMIC2" +}; + +static const struct soc_enum in1_enum = + SOC_ENUM_SINGLE(WM8915_POWER_MANAGEMENT_7, 0, 3, inmux_text); + +static const struct snd_kcontrol_new in1_mux = + SOC_DAPM_ENUM("IN1 Mux", in1_enum); + +static const struct soc_enum in2_enum = + SOC_ENUM_SINGLE(WM8915_POWER_MANAGEMENT_7, 4, 3, inmux_text); + +static const struct snd_kcontrol_new in2_mux = + SOC_DAPM_ENUM("IN2 Mux", in2_enum); + +static const struct snd_kcontrol_new dac2r_mix[] = { +SOC_DAPM_SINGLE("Right Sidetone Switch", WM8915_DAC2_RIGHT_MIXER_ROUTING, + 5, 1, 0), +SOC_DAPM_SINGLE("Left Sidetone Switch", WM8915_DAC2_RIGHT_MIXER_ROUTING, + 4, 1, 0), +SOC_DAPM_SINGLE("DSP2 Switch", WM8915_DAC2_RIGHT_MIXER_ROUTING, 1, 1, 0), +SOC_DAPM_SINGLE("DSP1 Switch", WM8915_DAC2_RIGHT_MIXER_ROUTING, 0, 1, 0), +}; + +static const struct snd_kcontrol_new dac2l_mix[] = { +SOC_DAPM_SINGLE("Right Sidetone Switch", WM8915_DAC2_LEFT_MIXER_ROUTING, + 5, 1, 0), +SOC_DAPM_SINGLE("Left Sidetone Switch", WM8915_DAC2_LEFT_MIXER_ROUTING, + 4, 1, 0), +SOC_DAPM_SINGLE("DSP2 Switch", WM8915_DAC2_LEFT_MIXER_ROUTING, 1, 1, 0), +SOC_DAPM_SINGLE("DSP1 Switch", WM8915_DAC2_LEFT_MIXER_ROUTING, 0, 1, 0), +}; + +static const struct snd_kcontrol_new dac1r_mix[] = { +SOC_DAPM_SINGLE("Right Sidetone Switch", WM8915_DAC1_RIGHT_MIXER_ROUTING, + 5, 1, 0), +SOC_DAPM_SINGLE("Left Sidetone Switch", WM8915_DAC1_RIGHT_MIXER_ROUTING, + 4, 1, 0), +SOC_DAPM_SINGLE("DSP2 Switch", WM8915_DAC1_RIGHT_MIXER_ROUTING, 1, 1, 0), +SOC_DAPM_SINGLE("DSP1 Switch", WM8915_DAC1_RIGHT_MIXER_ROUTING, 0, 1, 0), +}; + +static const struct snd_kcontrol_new dac1l_mix[] = { +SOC_DAPM_SINGLE("Right Sidetone Switch", WM8915_DAC1_LEFT_MIXER_ROUTING, + 5, 1, 0), +SOC_DAPM_SINGLE("Left Sidetone Switch", WM8915_DAC1_LEFT_MIXER_ROUTING, + 4, 1, 0), +SOC_DAPM_SINGLE("DSP2 Switch", WM8915_DAC1_LEFT_MIXER_ROUTING, 1, 1, 0), +SOC_DAPM_SINGLE("DSP1 Switch", WM8915_DAC1_LEFT_MIXER_ROUTING, 0, 1, 0), +}; + +static const struct snd_kcontrol_new dsp1txl[] = { +SOC_DAPM_SINGLE("IN1 Switch", WM8915_DSP1_TX_LEFT_MIXER_ROUTING, + 1, 1, 0), +SOC_DAPM_SINGLE("DAC Switch", WM8915_DSP1_TX_LEFT_MIXER_ROUTING, + 0, 1, 0), +}; + +static const struct snd_kcontrol_new dsp1txr[] = { +SOC_DAPM_SINGLE("IN1 Switch", WM8915_DSP1_TX_RIGHT_MIXER_ROUTING, + 1, 1, 0), +SOC_DAPM_SINGLE("DAC Switch", WM8915_DSP1_TX_RIGHT_MIXER_ROUTING, + 0, 1, 0), +}; + +static const struct snd_kcontrol_new dsp2txl[] = { +SOC_DAPM_SINGLE("IN1 Switch", WM8915_DSP2_TX_LEFT_MIXER_ROUTING, + 1, 1, 0), +SOC_DAPM_SINGLE("DAC Switch", WM8915_DSP2_TX_LEFT_MIXER_ROUTING, + 0, 1, 0), +}; + +static const struct snd_kcontrol_new dsp2txr[] = { +SOC_DAPM_SINGLE("IN1 Switch", WM8915_DSP2_TX_RIGHT_MIXER_ROUTING, + 1, 1, 0), +SOC_DAPM_SINGLE("DAC Switch", WM8915_DSP2_TX_RIGHT_MIXER_ROUTING, + 0, 1, 0), +}; + + +static const struct snd_soc_dapm_widget wm8915_dapm_widgets[] = { +SND_SOC_DAPM_INPUT("IN1LN"), +SND_SOC_DAPM_INPUT("IN1LP"), +SND_SOC_DAPM_INPUT("IN1RN"), +SND_SOC_DAPM_INPUT("IN1RP"), + +SND_SOC_DAPM_INPUT("IN2LN"), +SND_SOC_DAPM_INPUT("IN2LP"), +SND_SOC_DAPM_INPUT("IN2RN"), +SND_SOC_DAPM_INPUT("IN2RP"), + +SND_SOC_DAPM_INPUT("DMIC1DAT"), +SND_SOC_DAPM_INPUT("DMIC2DAT"), + +SND_SOC_DAPM_SUPPLY_S("SYSCLK", 1, WM8915_AIF_CLOCKING_1, 0, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY_S("SYSDSPCLK", 2, WM8915_CLOCKING_1, 1, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY_S("AIFCLK", 2, WM8915_CLOCKING_1, 2, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY_S("Charge Pump", 2, WM8915_CHARGE_PUMP_1, 15, 0, cp_event, + SND_SOC_DAPM_POST_PMU), + +SND_SOC_DAPM_SUPPLY("LDO2", WM8915_POWER_MANAGEMENT_2, 1, 0, NULL, 0), +SND_SOC_DAPM_MICBIAS("MICB2", WM8915_POWER_MANAGEMENT_1, 9, 0), +SND_SOC_DAPM_MICBIAS("MICB1", WM8915_POWER_MANAGEMENT_1, 8, 0), + +SND_SOC_DAPM_PGA("IN1L PGA", WM8915_POWER_MANAGEMENT_2, 5, 0, NULL, 0), +SND_SOC_DAPM_PGA("IN1R PGA", WM8915_POWER_MANAGEMENT_2, 4, 0, NULL, 0), + +SND_SOC_DAPM_MUX("IN1L Mux", SND_SOC_NOPM, 0, 0, &in1_mux), +SND_SOC_DAPM_MUX("IN1R Mux", SND_SOC_NOPM, 0, 0, &in1_mux), +SND_SOC_DAPM_MUX("IN2L Mux", SND_SOC_NOPM, 0, 0, &in2_mux), +SND_SOC_DAPM_MUX("IN2R Mux", SND_SOC_NOPM, 0, 0, &in2_mux), + +SND_SOC_DAPM_PGA("IN1L", WM8915_POWER_MANAGEMENT_7, 2, 0, NULL, 0), +SND_SOC_DAPM_PGA("IN1R", WM8915_POWER_MANAGEMENT_7, 3, 0, NULL, 0), +SND_SOC_DAPM_PGA("IN2L", WM8915_POWER_MANAGEMENT_7, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA("IN2R", WM8915_POWER_MANAGEMENT_7, 7, 0, NULL, 0), + +SND_SOC_DAPM_SUPPLY("DMIC2", WM8915_POWER_MANAGEMENT_7, 9, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("DMIC1", WM8915_POWER_MANAGEMENT_7, 8, 0, NULL, 0), + +SND_SOC_DAPM_ADC("DMIC2L", NULL, WM8915_POWER_MANAGEMENT_3, 5, 0), +SND_SOC_DAPM_ADC("DMIC2R", NULL, WM8915_POWER_MANAGEMENT_3, 4, 0), +SND_SOC_DAPM_ADC("DMIC1L", NULL, WM8915_POWER_MANAGEMENT_3, 3, 0), +SND_SOC_DAPM_ADC("DMIC1R", NULL, WM8915_POWER_MANAGEMENT_3, 2, 0), + +SND_SOC_DAPM_ADC("ADCL", NULL, WM8915_POWER_MANAGEMENT_3, 1, 0), +SND_SOC_DAPM_ADC("ADCR", NULL, WM8915_POWER_MANAGEMENT_3, 0, 0), + +SND_SOC_DAPM_MUX("Left Sidetone", SND_SOC_NOPM, 0, 0, &left_sidetone), +SND_SOC_DAPM_MUX("Right Sidetone", SND_SOC_NOPM, 0, 0, &right_sidetone), + +SND_SOC_DAPM_AIF_IN("DSP2RXL", NULL, 0, WM8915_POWER_MANAGEMENT_3, 11, 0), +SND_SOC_DAPM_AIF_IN("DSP2RXR", NULL, 1, WM8915_POWER_MANAGEMENT_3, 10, 0), +SND_SOC_DAPM_AIF_IN("DSP1RXL", NULL, 0, WM8915_POWER_MANAGEMENT_3, 9, 0), +SND_SOC_DAPM_AIF_IN("DSP1RXR", NULL, 1, WM8915_POWER_MANAGEMENT_3, 8, 0), + +SND_SOC_DAPM_MIXER("DSP2TXL", WM8915_POWER_MANAGEMENT_5, 11, 0, + dsp2txl, ARRAY_SIZE(dsp2txl)), +SND_SOC_DAPM_MIXER("DSP2TXR", WM8915_POWER_MANAGEMENT_5, 10, 0, + dsp2txr, ARRAY_SIZE(dsp2txr)), +SND_SOC_DAPM_MIXER("DSP1TXL", WM8915_POWER_MANAGEMENT_5, 9, 0, + dsp1txl, ARRAY_SIZE(dsp1txl)), +SND_SOC_DAPM_MIXER("DSP1TXR", WM8915_POWER_MANAGEMENT_5, 8, 0, + dsp1txr, ARRAY_SIZE(dsp1txr)), + +SND_SOC_DAPM_MIXER("DAC2L Mixer", SND_SOC_NOPM, 0, 0, + dac2l_mix, ARRAY_SIZE(dac2l_mix)), +SND_SOC_DAPM_MIXER("DAC2R Mixer", SND_SOC_NOPM, 0, 0, + dac2r_mix, ARRAY_SIZE(dac2r_mix)), +SND_SOC_DAPM_MIXER("DAC1L Mixer", SND_SOC_NOPM, 0, 0, + dac1l_mix, ARRAY_SIZE(dac1l_mix)), +SND_SOC_DAPM_MIXER("DAC1R Mixer", SND_SOC_NOPM, 0, 0, + dac1r_mix, ARRAY_SIZE(dac1r_mix)), + +SND_SOC_DAPM_DAC("DAC2L", NULL, WM8915_POWER_MANAGEMENT_5, 3, 0), +SND_SOC_DAPM_DAC("DAC2R", NULL, WM8915_POWER_MANAGEMENT_5, 2, 0), +SND_SOC_DAPM_DAC("DAC1L", NULL, WM8915_POWER_MANAGEMENT_5, 1, 0), +SND_SOC_DAPM_DAC("DAC1R", NULL, WM8915_POWER_MANAGEMENT_5, 0, 0), + +SND_SOC_DAPM_AIF_IN("AIF2RX1", "AIF2 Playback", 1, + WM8915_POWER_MANAGEMENT_4, 9, 0), +SND_SOC_DAPM_AIF_IN("AIF2RX0", "AIF2 Playback", 2, + WM8915_POWER_MANAGEMENT_4, 8, 0), + +SND_SOC_DAPM_AIF_IN("AIF2TX1", "AIF2 Capture", 1, + WM8915_POWER_MANAGEMENT_6, 9, 0), +SND_SOC_DAPM_AIF_IN("AIF2TX0", "AIF2 Capture", 2, + WM8915_POWER_MANAGEMENT_6, 8, 0), + +SND_SOC_DAPM_AIF_IN("AIF1RX5", "AIF1 Playback", 5, + WM8915_POWER_MANAGEMENT_4, 5, 0), +SND_SOC_DAPM_AIF_IN("AIF1RX4", "AIF1 Playback", 4, + WM8915_POWER_MANAGEMENT_4, 4, 0), +SND_SOC_DAPM_AIF_IN("AIF1RX3", "AIF1 Playback", 3, + WM8915_POWER_MANAGEMENT_4, 3, 0), +SND_SOC_DAPM_AIF_IN("AIF1RX2", "AIF1 Playback", 2, + WM8915_POWER_MANAGEMENT_4, 2, 0), +SND_SOC_DAPM_AIF_IN("AIF1RX1", "AIF1 Playback", 1, + WM8915_POWER_MANAGEMENT_4, 1, 0), +SND_SOC_DAPM_AIF_IN("AIF1RX0", "AIF1 Playback", 0, + WM8915_POWER_MANAGEMENT_4, 0, 0), + +SND_SOC_DAPM_AIF_OUT("AIF1TX5", "AIF1 Capture", 5, + WM8915_POWER_MANAGEMENT_6, 5, 0), +SND_SOC_DAPM_AIF_OUT("AIF1TX4", "AIF1 Capture", 4, + WM8915_POWER_MANAGEMENT_6, 4, 0), +SND_SOC_DAPM_AIF_OUT("AIF1TX3", "AIF1 Capture", 3, + WM8915_POWER_MANAGEMENT_6, 3, 0), +SND_SOC_DAPM_AIF_OUT("AIF1TX2", "AIF1 Capture", 2, + WM8915_POWER_MANAGEMENT_6, 2, 0), +SND_SOC_DAPM_AIF_OUT("AIF1TX1", "AIF1 Capture", 1, + WM8915_POWER_MANAGEMENT_6, 1, 0), +SND_SOC_DAPM_AIF_OUT("AIF1TX0", "AIF1 Capture", 0, + WM8915_POWER_MANAGEMENT_6, 0, 0), + +/* We route as stereo pairs so define some dummy widgets to squash + * things down for now. RXA = 0,1, RXB = 2,3 and so on */ +SND_SOC_DAPM_PGA("AIF1RXA", SND_SOC_NOPM, 0, 0, NULL, 0), +SND_SOC_DAPM_PGA("AIF1RXB", SND_SOC_NOPM, 0, 0, NULL, 0), +SND_SOC_DAPM_PGA("AIF1RXC", SND_SOC_NOPM, 0, 0, NULL, 0), +SND_SOC_DAPM_PGA("AIF2RX", SND_SOC_NOPM, 0, 0, NULL, 0), +SND_SOC_DAPM_PGA("DSP2TX", SND_SOC_NOPM, 0, 0, NULL, 0), + +SND_SOC_DAPM_MUX("DSP1RX", SND_SOC_NOPM, 0, 0, &dsp1rx), +SND_SOC_DAPM_MUX("DSP2RX", SND_SOC_NOPM, 0, 0, &dsp2rx), +SND_SOC_DAPM_MUX("AIF2TX", SND_SOC_NOPM, 0, 0, &aif2tx), + +SND_SOC_DAPM_MUX("SPKL", SND_SOC_NOPM, 0, 0, &spkl_mux), +SND_SOC_DAPM_MUX("SPKR", SND_SOC_NOPM, 0, 0, &spkr_mux), +SND_SOC_DAPM_PGA("SPKL PGA", WM8915_LEFT_PDM_SPEAKER, 4, 0, NULL, 0), +SND_SOC_DAPM_PGA("SPKR PGA", WM8915_RIGHT_PDM_SPEAKER, 4, 0, NULL, 0), + +SND_SOC_DAPM_PGA_S("HPOUT2L PGA", 0, WM8915_POWER_MANAGEMENT_1, 7, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT2L_DLY", 1, WM8915_ANALOGUE_HP_2, 5, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT2L_DCS", 2, WM8915_DC_SERVO_1, 2, 0, dcs_start, + SND_SOC_DAPM_POST_PMU), +SND_SOC_DAPM_PGA_S("HPOUT2L_OUTP", 3, WM8915_ANALOGUE_HP_2, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT2L_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT2L, 0, + rmv_short_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + +SND_SOC_DAPM_PGA_S("HPOUT2R PGA", 0, WM8915_POWER_MANAGEMENT_1, 6, 0,NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT2R_DLY", 1, WM8915_ANALOGUE_HP_2, 1, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT2R_DCS", 2, WM8915_DC_SERVO_1, 3, 0, dcs_start, + SND_SOC_DAPM_POST_PMU), +SND_SOC_DAPM_PGA_S("HPOUT2R_OUTP", 3, WM8915_ANALOGUE_HP_2, 2, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT2R_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT2R, 0, + rmv_short_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + +SND_SOC_DAPM_PGA_S("HPOUT1L PGA", 0, WM8915_POWER_MANAGEMENT_1, 5, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT1L_DLY", 1, WM8915_ANALOGUE_HP_1, 5, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT1L_DCS", 2, WM8915_DC_SERVO_1, 0, 0, dcs_start, + SND_SOC_DAPM_POST_PMU), +SND_SOC_DAPM_PGA_S("HPOUT1L_OUTP", 3, WM8915_ANALOGUE_HP_1, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT1L_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT1L, 0, + rmv_short_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + +SND_SOC_DAPM_PGA_S("HPOUT1R PGA", 0, WM8915_POWER_MANAGEMENT_1, 4, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT1R_DLY", 1, WM8915_ANALOGUE_HP_1, 1, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT1R_DCS", 2, WM8915_DC_SERVO_1, 1, 0, dcs_start, + SND_SOC_DAPM_POST_PMU), +SND_SOC_DAPM_PGA_S("HPOUT1R_OUTP", 3, WM8915_ANALOGUE_HP_1, 2, 0, NULL, 0), +SND_SOC_DAPM_PGA_S("HPOUT1R_RMV_SHORT", 3, SND_SOC_NOPM, HPOUT1R, 0, + rmv_short_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), + +SND_SOC_DAPM_OUTPUT("HPOUT1L"), +SND_SOC_DAPM_OUTPUT("HPOUT1R"), +SND_SOC_DAPM_OUTPUT("HPOUT2L"), +SND_SOC_DAPM_OUTPUT("HPOUT2R"), +SND_SOC_DAPM_OUTPUT("SPKDAT"), +}; + +static const struct snd_soc_dapm_route wm8915_dapm_routes[] = { + { "AIFCLK", NULL, "SYSCLK" }, + { "SYSDSPCLK", NULL, "SYSCLK" }, + { "Charge Pump", NULL, "SYSCLK" }, + + { "MICB1", NULL, "LDO2" }, + { "MICB2", NULL, "LDO2" }, + + { "IN1L PGA", NULL, "IN2LN" }, + { "IN1L PGA", NULL, "IN2LP" }, + { "IN1L PGA", NULL, "IN1LN" }, + { "IN1L PGA", NULL, "IN1LP" }, + + { "IN1R PGA", NULL, "IN2RN" }, + { "IN1R PGA", NULL, "IN2RP" }, + { "IN1R PGA", NULL, "IN1RN" }, + { "IN1R PGA", NULL, "IN1RP" }, + + { "ADCL", NULL, "IN1L PGA" }, + + { "ADCR", NULL, "IN1R PGA" }, + + { "DMIC1L", NULL, "DMIC1DAT" }, + { "DMIC1R", NULL, "DMIC1DAT" }, + { "DMIC2L", NULL, "DMIC2DAT" }, + { "DMIC2R", NULL, "DMIC2DAT" }, + + { "DMIC2L", NULL, "DMIC2" }, + { "DMIC2R", NULL, "DMIC2" }, + { "DMIC1L", NULL, "DMIC1" }, + { "DMIC1R", NULL, "DMIC1" }, + + { "IN1L Mux", "ADC", "ADCL" }, + { "IN1L Mux", "DMIC1", "DMIC1L" }, + { "IN1L Mux", "DMIC2", "DMIC2L" }, + + { "IN1R Mux", "ADC", "ADCR" }, + { "IN1R Mux", "DMIC1", "DMIC1R" }, + { "IN1R Mux", "DMIC2", "DMIC2R" }, + + { "IN2L Mux", "ADC", "ADCL" }, + { "IN2L Mux", "DMIC1", "DMIC1L" }, + { "IN2L Mux", "DMIC2", "DMIC2L" }, + + { "IN2R Mux", "ADC", "ADCR" }, + { "IN2R Mux", "DMIC1", "DMIC1R" }, + { "IN2R Mux", "DMIC2", "DMIC2R" }, + + { "Left Sidetone", "IN1", "IN1L Mux" }, + { "Left Sidetone", "IN2", "IN2L Mux" }, + + { "Right Sidetone", "IN1", "IN1R Mux" }, + { "Right Sidetone", "IN2", "IN2R Mux" }, + + { "DSP1TXL", "IN1 Switch", "IN1L Mux" }, + { "DSP1TXR", "IN1 Switch", "IN1R Mux" }, + + { "DSP2TXL", "IN1 Switch", "IN2L Mux" }, + { "DSP2TXR", "IN1 Switch", "IN2R Mux" }, + + { "AIF1TX0", NULL, "DSP1TXL" }, + { "AIF1TX1", NULL, "DSP1TXR" }, + { "AIF1TX2", NULL, "DSP2TXL" }, + { "AIF1TX3", NULL, "DSP2TXR" }, + { "AIF1TX4", NULL, "AIF2RX0" }, + { "AIF1TX5", NULL, "AIF2RX1" }, + + { "AIF1RX0", NULL, "AIFCLK" }, + { "AIF1RX1", NULL, "AIFCLK" }, + { "AIF1RX2", NULL, "AIFCLK" }, + { "AIF1RX3", NULL, "AIFCLK" }, + { "AIF1RX4", NULL, "AIFCLK" }, + { "AIF1RX5", NULL, "AIFCLK" }, + + { "AIF2RX0", NULL, "AIFCLK" }, + { "AIF2RX1", NULL, "AIFCLK" }, + + { "DSP1RXL", NULL, "SYSDSPCLK" }, + { "DSP1RXR", NULL, "SYSDSPCLK" }, + { "DSP2RXL", NULL, "SYSDSPCLK" }, + { "DSP2RXR", NULL, "SYSDSPCLK" }, + { "DSP1TXL", NULL, "SYSDSPCLK" }, + { "DSP1TXR", NULL, "SYSDSPCLK" }, + { "DSP2TXL", NULL, "SYSDSPCLK" }, + { "DSP2TXR", NULL, "SYSDSPCLK" }, + + { "AIF1RXA", NULL, "AIF1RX0" }, + { "AIF1RXA", NULL, "AIF1RX1" }, + { "AIF1RXB", NULL, "AIF1RX2" }, + { "AIF1RXB", NULL, "AIF1RX3" }, + { "AIF1RXC", NULL, "AIF1RX4" }, + { "AIF1RXC", NULL, "AIF1RX5" }, + + { "AIF2RX", NULL, "AIF2RX0" }, + { "AIF2RX", NULL, "AIF2RX1" }, + + { "AIF2TX", "DSP2", "DSP2TX" }, + { "AIF2TX", "DSP1", "DSP1RX" }, + { "AIF2TX", "AIF1", "AIF1RXC" }, + + { "DSP1RXL", NULL, "DSP1RX" }, + { "DSP1RXR", NULL, "DSP1RX" }, + { "DSP2RXL", NULL, "DSP2RX" }, + { "DSP2RXR", NULL, "DSP2RX" }, + + { "DSP2TX", NULL, "DSP2TXL" }, + { "DSP2TX", NULL, "DSP2TXR" }, + + { "DSP1RX", "AIF1", "AIF1RXA" }, + { "DSP1RX", "AIF2", "AIF2RX" }, + + { "DSP2RX", "AIF1", "AIF1RXB" }, + { "DSP2RX", "AIF2", "AIF2RX" }, + + { "DAC2L Mixer", "DSP2 Switch", "DSP2RXL" }, + { "DAC2L Mixer", "DSP1 Switch", "DSP1RXL" }, + { "DAC2L Mixer", "Right Sidetone Switch", "Right Sidetone" }, + { "DAC2L Mixer", "Left Sidetone Switch", "Left Sidetone" }, + + { "DAC2R Mixer", "DSP2 Switch", "DSP2RXR" }, + { "DAC2R Mixer", "DSP1 Switch", "DSP1RXR" }, + { "DAC2R Mixer", "Right Sidetone Switch", "Right Sidetone" }, + { "DAC2R Mixer", "Left Sidetone Switch", "Left Sidetone" }, + + { "DAC1L Mixer", "DSP2 Switch", "DSP2RXL" }, + { "DAC1L Mixer", "DSP1 Switch", "DSP1RXL" }, + { "DAC1L Mixer", "Right Sidetone Switch", "Right Sidetone" }, + { "DAC1L Mixer", "Left Sidetone Switch", "Left Sidetone" }, + + { "DAC1R Mixer", "DSP2 Switch", "DSP2RXR" }, + { "DAC1R Mixer", "DSP1 Switch", "DSP1RXR" }, + { "DAC1R Mixer", "Right Sidetone Switch", "Right Sidetone" }, + { "DAC1R Mixer", "Left Sidetone Switch", "Left Sidetone" }, + + { "DAC1L", NULL, "DAC1L Mixer" }, + { "DAC1R", NULL, "DAC1R Mixer" }, + { "DAC2L", NULL, "DAC2L Mixer" }, + { "DAC2R", NULL, "DAC2R Mixer" }, + + { "HPOUT2L PGA", NULL, "Charge Pump" }, + { "HPOUT2L PGA", NULL, "DAC2L" }, + { "HPOUT2L_DLY", NULL, "HPOUT2L PGA" }, + { "HPOUT2L_DCS", NULL, "HPOUT2L_DLY" }, + { "HPOUT2L_OUTP", NULL, "HPOUT2L_DCS" }, + { "HPOUT2L_RMV_SHORT", NULL, "HPOUT2L_OUTP" }, + + { "HPOUT2R PGA", NULL, "Charge Pump" }, + { "HPOUT2R PGA", NULL, "DAC2R" }, + { "HPOUT2R_DLY", NULL, "HPOUT2R PGA" }, + { "HPOUT2R_DCS", NULL, "HPOUT2R_DLY" }, + { "HPOUT2R_OUTP", NULL, "HPOUT2R_DCS" }, + { "HPOUT2R_RMV_SHORT", NULL, "HPOUT2R_OUTP" }, + + { "HPOUT1L PGA", NULL, "Charge Pump" }, + { "HPOUT1L PGA", NULL, "DAC1L" }, + { "HPOUT1L_DLY", NULL, "HPOUT1L PGA" }, + { "HPOUT1L_DCS", NULL, "HPOUT1L_DLY" }, + { "HPOUT1L_OUTP", NULL, "HPOUT1L_DCS" }, + { "HPOUT1L_RMV_SHORT", NULL, "HPOUT1L_OUTP" }, + + { "HPOUT1R PGA", NULL, "Charge Pump" }, + { "HPOUT1R PGA", NULL, "DAC1R" }, + { "HPOUT1R_DLY", NULL, "HPOUT1R PGA" }, + { "HPOUT1R_DCS", NULL, "HPOUT1R_DLY" }, + { "HPOUT1R_OUTP", NULL, "HPOUT1R_DCS" }, + { "HPOUT1R_RMV_SHORT", NULL, "HPOUT1R_OUTP" }, + + { "HPOUT2L", NULL, "HPOUT2L_RMV_SHORT" }, + { "HPOUT2R", NULL, "HPOUT2R_RMV_SHORT" }, + { "HPOUT1L", NULL, "HPOUT1L_RMV_SHORT" }, + { "HPOUT1R", NULL, "HPOUT1R_RMV_SHORT" }, + + { "SPKL", "DAC1L", "DAC1L" }, + { "SPKL", "DAC1R", "DAC1R" }, + { "SPKL", "DAC2L", "DAC2L" }, + { "SPKL", "DAC2R", "DAC2R" }, + + { "SPKR", "DAC1L", "DAC1L" }, + { "SPKR", "DAC1R", "DAC1R" }, + { "SPKR", "DAC2L", "DAC2L" }, + { "SPKR", "DAC2R", "DAC2R" }, + + { "SPKL PGA", NULL, "SPKL" }, + { "SPKR PGA", NULL, "SPKR" }, + + { "SPKDAT", NULL, "SPKL PGA" }, + { "SPKDAT", NULL, "SPKR PGA" }, +}; + +static int wm8915_readable_register(struct snd_soc_codec *codec, + unsigned int reg) +{ + /* Due to the sparseness of the register map the compiler + * output from an explicit switch statement ends up being much + * more efficient than a table. + */ + switch (reg) { + case WM8915_SOFTWARE_RESET: + case WM8915_POWER_MANAGEMENT_1: + case WM8915_POWER_MANAGEMENT_2: + case WM8915_POWER_MANAGEMENT_3: + case WM8915_POWER_MANAGEMENT_4: + case WM8915_POWER_MANAGEMENT_5: + case WM8915_POWER_MANAGEMENT_6: + case WM8915_POWER_MANAGEMENT_7: + case WM8915_POWER_MANAGEMENT_8: + case WM8915_LEFT_LINE_INPUT_VOLUME: + case WM8915_RIGHT_LINE_INPUT_VOLUME: + case WM8915_LINE_INPUT_CONTROL: + case WM8915_DAC1_HPOUT1_VOLUME: + case WM8915_DAC2_HPOUT2_VOLUME: + case WM8915_DAC1_LEFT_VOLUME: + case WM8915_DAC1_RIGHT_VOLUME: + case WM8915_DAC2_LEFT_VOLUME: + case WM8915_DAC2_RIGHT_VOLUME: + case WM8915_OUTPUT1_LEFT_VOLUME: + case WM8915_OUTPUT1_RIGHT_VOLUME: + case WM8915_OUTPUT2_LEFT_VOLUME: + case WM8915_OUTPUT2_RIGHT_VOLUME: + case WM8915_MICBIAS_1: + case WM8915_MICBIAS_2: + case WM8915_LDO_1: + case WM8915_LDO_2: + case WM8915_ACCESSORY_DETECT_MODE_1: + case WM8915_ACCESSORY_DETECT_MODE_2: + case WM8915_HEADPHONE_DETECT_1: + case WM8915_HEADPHONE_DETECT_2: + case WM8915_MIC_DETECT_1: + case WM8915_MIC_DETECT_2: + case WM8915_MIC_DETECT_3: + case WM8915_CHARGE_PUMP_1: + case WM8915_CHARGE_PUMP_2: + case WM8915_DC_SERVO_1: + case WM8915_DC_SERVO_2: + case WM8915_DC_SERVO_3: + case WM8915_DC_SERVO_5: + case WM8915_DC_SERVO_6: + case WM8915_DC_SERVO_7: + case WM8915_DC_SERVO_READBACK_0: + case WM8915_ANALOGUE_HP_1: + case WM8915_ANALOGUE_HP_2: + case WM8915_CHIP_REVISION: + case WM8915_CONTROL_INTERFACE_1: + case WM8915_WRITE_SEQUENCER_CTRL_1: + case WM8915_WRITE_SEQUENCER_CTRL_2: + case WM8915_AIF_CLOCKING_1: + case WM8915_AIF_CLOCKING_2: + case WM8915_CLOCKING_1: + case WM8915_CLOCKING_2: + case WM8915_AIF_RATE: + case WM8915_FLL_CONTROL_1: + case WM8915_FLL_CONTROL_2: + case WM8915_FLL_CONTROL_3: + case WM8915_FLL_CONTROL_4: + case WM8915_FLL_CONTROL_5: + case WM8915_FLL_CONTROL_6: + case WM8915_FLL_EFS_1: + case WM8915_FLL_EFS_2: + case WM8915_AIF1_CONTROL: + case WM8915_AIF1_BCLK: + case WM8915_AIF1_TX_LRCLK_1: + case WM8915_AIF1_TX_LRCLK_2: + case WM8915_AIF1_RX_LRCLK_1: + case WM8915_AIF1_RX_LRCLK_2: + case WM8915_AIF1TX_DATA_CONFIGURATION_1: + case WM8915_AIF1TX_DATA_CONFIGURATION_2: + case WM8915_AIF1RX_DATA_CONFIGURATION: + case WM8915_AIF1TX_CHANNEL_0_CONFIGURATION: + case WM8915_AIF1TX_CHANNEL_1_CONFIGURATION: + case WM8915_AIF1TX_CHANNEL_2_CONFIGURATION: + case WM8915_AIF1TX_CHANNEL_3_CONFIGURATION: + case WM8915_AIF1TX_CHANNEL_4_CONFIGURATION: + case WM8915_AIF1TX_CHANNEL_5_CONFIGURATION: + case WM8915_AIF1RX_CHANNEL_0_CONFIGURATION: + case WM8915_AIF1RX_CHANNEL_1_CONFIGURATION: + case WM8915_AIF1RX_CHANNEL_2_CONFIGURATION: + case WM8915_AIF1RX_CHANNEL_3_CONFIGURATION: + case WM8915_AIF1RX_CHANNEL_4_CONFIGURATION: + case WM8915_AIF1RX_CHANNEL_5_CONFIGURATION: + case WM8915_AIF1RX_MONO_CONFIGURATION: + case WM8915_AIF1TX_TEST: + case WM8915_AIF2_CONTROL: + case WM8915_AIF2_BCLK: + case WM8915_AIF2_TX_LRCLK_1: + case WM8915_AIF2_TX_LRCLK_2: + case WM8915_AIF2_RX_LRCLK_1: + case WM8915_AIF2_RX_LRCLK_2: + case WM8915_AIF2TX_DATA_CONFIGURATION_1: + case WM8915_AIF2TX_DATA_CONFIGURATION_2: + case WM8915_AIF2RX_DATA_CONFIGURATION: + case WM8915_AIF2TX_CHANNEL_0_CONFIGURATION: + case WM8915_AIF2TX_CHANNEL_1_CONFIGURATION: + case WM8915_AIF2RX_CHANNEL_0_CONFIGURATION: + case WM8915_AIF2RX_CHANNEL_1_CONFIGURATION: + case WM8915_AIF2RX_MONO_CONFIGURATION: + case WM8915_AIF2TX_TEST: + case WM8915_DSP1_TX_LEFT_VOLUME: + case WM8915_DSP1_TX_RIGHT_VOLUME: + case WM8915_DSP1_RX_LEFT_VOLUME: + case WM8915_DSP1_RX_RIGHT_VOLUME: + case WM8915_DSP1_TX_FILTERS: + case WM8915_DSP1_RX_FILTERS_1: + case WM8915_DSP1_RX_FILTERS_2: + case WM8915_DSP1_DRC_1: + case WM8915_DSP1_DRC_2: + case WM8915_DSP1_DRC_3: + case WM8915_DSP1_DRC_4: + case WM8915_DSP1_DRC_5: + case WM8915_DSP1_RX_EQ_GAINS_1: + case WM8915_DSP1_RX_EQ_GAINS_2: + case WM8915_DSP1_RX_EQ_BAND_1_A: + case WM8915_DSP1_RX_EQ_BAND_1_B: + case WM8915_DSP1_RX_EQ_BAND_1_PG: + case WM8915_DSP1_RX_EQ_BAND_2_A: + case WM8915_DSP1_RX_EQ_BAND_2_B: + case WM8915_DSP1_RX_EQ_BAND_2_C: + case WM8915_DSP1_RX_EQ_BAND_2_PG: + case WM8915_DSP1_RX_EQ_BAND_3_A: + case WM8915_DSP1_RX_EQ_BAND_3_B: + case WM8915_DSP1_RX_EQ_BAND_3_C: + case WM8915_DSP1_RX_EQ_BAND_3_PG: + case WM8915_DSP1_RX_EQ_BAND_4_A: + case WM8915_DSP1_RX_EQ_BAND_4_B: + case WM8915_DSP1_RX_EQ_BAND_4_C: + case WM8915_DSP1_RX_EQ_BAND_4_PG: + case WM8915_DSP1_RX_EQ_BAND_5_A: + case WM8915_DSP1_RX_EQ_BAND_5_B: + case WM8915_DSP1_RX_EQ_BAND_5_PG: + case WM8915_DSP2_TX_LEFT_VOLUME: + case WM8915_DSP2_TX_RIGHT_VOLUME: + case WM8915_DSP2_RX_LEFT_VOLUME: + case WM8915_DSP2_RX_RIGHT_VOLUME: + case WM8915_DSP2_TX_FILTERS: + case WM8915_DSP2_RX_FILTERS_1: + case WM8915_DSP2_RX_FILTERS_2: + case WM8915_DSP2_DRC_1: + case WM8915_DSP2_DRC_2: + case WM8915_DSP2_DRC_3: + case WM8915_DSP2_DRC_4: + case WM8915_DSP2_DRC_5: + case WM8915_DSP2_RX_EQ_GAINS_1: + case WM8915_DSP2_RX_EQ_GAINS_2: + case WM8915_DSP2_RX_EQ_BAND_1_A: + case WM8915_DSP2_RX_EQ_BAND_1_B: + case WM8915_DSP2_RX_EQ_BAND_1_PG: + case WM8915_DSP2_RX_EQ_BAND_2_A: + case WM8915_DSP2_RX_EQ_BAND_2_B: + case WM8915_DSP2_RX_EQ_BAND_2_C: + case WM8915_DSP2_RX_EQ_BAND_2_PG: + case WM8915_DSP2_RX_EQ_BAND_3_A: + case WM8915_DSP2_RX_EQ_BAND_3_B: + case WM8915_DSP2_RX_EQ_BAND_3_C: + case WM8915_DSP2_RX_EQ_BAND_3_PG: + case WM8915_DSP2_RX_EQ_BAND_4_A: + case WM8915_DSP2_RX_EQ_BAND_4_B: + case WM8915_DSP2_RX_EQ_BAND_4_C: + case WM8915_DSP2_RX_EQ_BAND_4_PG: + case WM8915_DSP2_RX_EQ_BAND_5_A: + case WM8915_DSP2_RX_EQ_BAND_5_B: + case WM8915_DSP2_RX_EQ_BAND_5_PG: + case WM8915_DAC1_MIXER_VOLUMES: + case WM8915_DAC1_LEFT_MIXER_ROUTING: + case WM8915_DAC1_RIGHT_MIXER_ROUTING: + case WM8915_DAC2_MIXER_VOLUMES: + case WM8915_DAC2_LEFT_MIXER_ROUTING: + case WM8915_DAC2_RIGHT_MIXER_ROUTING: + case WM8915_DSP1_TX_LEFT_MIXER_ROUTING: + case WM8915_DSP1_TX_RIGHT_MIXER_ROUTING: + case WM8915_DSP2_TX_LEFT_MIXER_ROUTING: + case WM8915_DSP2_TX_RIGHT_MIXER_ROUTING: + case WM8915_DSP_TX_MIXER_SELECT: + case WM8915_DAC_SOFTMUTE: + case WM8915_OVERSAMPLING: + case WM8915_SIDETONE: + case WM8915_GPIO_1: + case WM8915_GPIO_2: + case WM8915_GPIO_3: + case WM8915_GPIO_4: + case WM8915_GPIO_5: + case WM8915_PULL_CONTROL_1: + case WM8915_PULL_CONTROL_2: + case WM8915_INTERRUPT_STATUS_1: + case WM8915_INTERRUPT_STATUS_2: + case WM8915_INTERRUPT_RAW_STATUS_2: + case WM8915_INTERRUPT_STATUS_1_MASK: + case WM8915_INTERRUPT_STATUS_2_MASK: + case WM8915_INTERRUPT_CONTROL: + case WM8915_LEFT_PDM_SPEAKER: + case WM8915_RIGHT_PDM_SPEAKER: + case WM8915_PDM_SPEAKER_MUTE_SEQUENCE: + case WM8915_PDM_SPEAKER_VOLUME: + return 1; + default: + return 0; + } +} + +static int wm8915_volatile_register(struct snd_soc_codec *codec, + unsigned int reg) +{ + switch (reg) { + case WM8915_SOFTWARE_RESET: + case WM8915_CHIP_REVISION: + case WM8915_LDO_1: + case WM8915_LDO_2: + case WM8915_INTERRUPT_STATUS_1: + case WM8915_INTERRUPT_STATUS_2: + case WM8915_INTERRUPT_RAW_STATUS_2: + case WM8915_DC_SERVO_READBACK_0: + case WM8915_DC_SERVO_2: + case WM8915_DC_SERVO_6: + case WM8915_DC_SERVO_7: + case WM8915_FLL_CONTROL_6: + case WM8915_MIC_DETECT_3: + case WM8915_HEADPHONE_DETECT_1: + case WM8915_HEADPHONE_DETECT_2: + return 1; + default: + return 0; + } +} + +static int wm8915_reset(struct snd_soc_codec *codec) +{ + return snd_soc_write(codec, WM8915_SOFTWARE_RESET, 0x8915); +} + +static int wm8915_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + int ret; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY) { + snd_soc_update_bits(codec, WM8915_POWER_MANAGEMENT_1, + WM8915_BG_ENA, WM8915_BG_ENA); + msleep(2); + } + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { + ret = regulator_bulk_enable(ARRAY_SIZE(wm8915->supplies), + wm8915->supplies); + if (ret != 0) { + dev_err(codec->dev, + "Failed to enable supplies: %d\n", + ret); + return ret; + } + + if (wm8915->pdata.ldo_ena >= 0) { + gpio_set_value_cansleep(wm8915->pdata.ldo_ena, + 1); + msleep(5); + } + + codec->cache_only = false; + snd_soc_cache_sync(codec); + } + + snd_soc_update_bits(codec, WM8915_POWER_MANAGEMENT_1, + WM8915_BG_ENA, 0); + break; + + case SND_SOC_BIAS_OFF: + codec->cache_only = true; + if (wm8915->pdata.ldo_ena >= 0) + gpio_set_value_cansleep(wm8915->pdata.ldo_ena, 0); + regulator_bulk_disable(ARRAY_SIZE(wm8915->supplies), + wm8915->supplies); + break; + } + + codec->dapm.bias_level = level; + + return 0; +} + +static int wm8915_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_codec *codec = dai->codec; + int aifctrl = 0; + int bclk = 0; + int lrclk_tx = 0; + int lrclk_rx = 0; + int aifctrl_reg, bclk_reg, lrclk_tx_reg, lrclk_rx_reg; + + switch (dai->id) { + case 0: + aifctrl_reg = WM8915_AIF1_CONTROL; + bclk_reg = WM8915_AIF1_BCLK; + lrclk_tx_reg = WM8915_AIF1_TX_LRCLK_2; + lrclk_rx_reg = WM8915_AIF1_RX_LRCLK_2; + break; + case 1: + aifctrl_reg = WM8915_AIF2_CONTROL; + bclk_reg = WM8915_AIF2_BCLK; + lrclk_tx_reg = WM8915_AIF2_TX_LRCLK_2; + lrclk_rx_reg = WM8915_AIF2_RX_LRCLK_2; + break; + default: + BUG(); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + bclk |= WM8915_AIF1_BCLK_INV; + break; + case SND_SOC_DAIFMT_NB_IF: + lrclk_tx |= WM8915_AIF1TX_LRCLK_INV; + lrclk_rx |= WM8915_AIF1RX_LRCLK_INV; + break; + case SND_SOC_DAIFMT_IB_IF: + bclk |= WM8915_AIF1_BCLK_INV; + lrclk_tx |= WM8915_AIF1TX_LRCLK_INV; + lrclk_rx |= WM8915_AIF1RX_LRCLK_INV; + break; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + break; + case SND_SOC_DAIFMT_CBS_CFM: + lrclk_tx |= WM8915_AIF1TX_LRCLK_MSTR; + lrclk_rx |= WM8915_AIF1RX_LRCLK_MSTR; + break; + case SND_SOC_DAIFMT_CBM_CFS: + bclk |= WM8915_AIF1_BCLK_MSTR; + break; + case SND_SOC_DAIFMT_CBM_CFM: + bclk |= WM8915_AIF1_BCLK_MSTR; + lrclk_tx |= WM8915_AIF1TX_LRCLK_MSTR; + lrclk_rx |= WM8915_AIF1RX_LRCLK_MSTR; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + break; + case SND_SOC_DAIFMT_DSP_B: + aifctrl |= 1; + break; + case SND_SOC_DAIFMT_I2S: + aifctrl |= 2; + break; + case SND_SOC_DAIFMT_LEFT_J: + aifctrl |= 3; + break; + default: + return -EINVAL; + } + + snd_soc_update_bits(codec, aifctrl_reg, WM8915_AIF1_FMT_MASK, aifctrl); + snd_soc_update_bits(codec, bclk_reg, + WM8915_AIF1_BCLK_INV | WM8915_AIF1_BCLK_MSTR, + bclk); + snd_soc_update_bits(codec, lrclk_tx_reg, + WM8915_AIF1TX_LRCLK_INV | + WM8915_AIF1TX_LRCLK_MSTR, + lrclk_tx); + snd_soc_update_bits(codec, lrclk_rx_reg, + WM8915_AIF1RX_LRCLK_INV | + WM8915_AIF1RX_LRCLK_MSTR, + lrclk_rx); + + return 0; +} + +static const int bclk_divs[] = { + 1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96 +}; + +static const int dsp_divs[] = { + 48000, 32000, 16000, 8000 +}; + +static int wm8915_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + int bits, i, bclk_rate, best, cur_val; + int aifdata = 0; + int bclk = 0; + int lrclk = 0; + int dsp = 0; + int aifdata_reg, bclk_reg, lrclk_reg, dsp_shift; + + if (!wm8915->sysclk) { + dev_err(codec->dev, "SYSCLK not configured\n"); + return -EINVAL; + } + + switch (dai->id) { + case 0: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || + (snd_soc_read(codec, WM8915_GPIO_1)) & WM8915_GP1_FN_MASK) { + aifdata_reg = WM8915_AIF1RX_DATA_CONFIGURATION; + lrclk_reg = WM8915_AIF1_RX_LRCLK_1; + } else { + aifdata_reg = WM8915_AIF1TX_DATA_CONFIGURATION_1; + lrclk_reg = WM8915_AIF1_TX_LRCLK_1; + } + bclk_reg = WM8915_AIF1_BCLK; + dsp_shift = 0; + break; + case 1: + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || + (snd_soc_read(codec, WM8915_GPIO_2)) & WM8915_GP2_FN_MASK) { + aifdata_reg = WM8915_AIF2RX_DATA_CONFIGURATION; + lrclk_reg = WM8915_AIF2_RX_LRCLK_1; + } else { + aifdata_reg = WM8915_AIF2TX_DATA_CONFIGURATION_1; + lrclk_reg = WM8915_AIF2_TX_LRCLK_1; + } + bclk_reg = WM8915_AIF2_BCLK; + dsp_shift = WM8915_DSP2_DIV_SHIFT; + break; + default: + BUG(); + return -EINVAL; + } + + bclk_rate = snd_soc_params_to_bclk(params); + if (bclk_rate < 0) { + dev_err(codec->dev, "Unsupported BCLK rate: %d\n", bclk_rate); + return bclk_rate; + } + + /* Needs looking at for TDM */ + bits = snd_pcm_format_width(params_format(params)); + if (bits < 0) + return bits; + aifdata |= (bits << WM8915_AIF1TX_WL_SHIFT) | bits; + + for (i = 0; i < ARRAY_SIZE(dsp_divs); i++) { + if (dsp_divs[i] == params_rate(params)) + break; + } + if (i == ARRAY_SIZE(dsp_divs)) { + dev_err(codec->dev, "Unsupported sample rate %dHz\n", + params_rate(params)); + return -EINVAL; + } + dsp |= i << dsp_shift; + + /* Pick a divisor for BCLK as close as we can get to ideal */ + best = 0; + for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) { + cur_val = (wm8915->sysclk / bclk_divs[i]) - bclk_rate; + if (cur_val < 0) /* BCLK table is sorted */ + break; + best = i; + } + bclk_rate = wm8915->sysclk / bclk_divs[best]; + dev_dbg(dai->dev, "Using BCLK_DIV %d for actual BCLK %dHz\n", + bclk_divs[best], bclk_rate); + bclk |= best; + + lrclk = bclk_rate / params_rate(params); + dev_dbg(dai->dev, "Using LRCLK rate %d for actual LRCLK %dHz\n", + lrclk, bclk_rate / lrclk); + + snd_soc_update_bits(codec, aifdata_reg, + WM8915_AIF1TX_WL_MASK | + WM8915_AIF1TX_SLOT_LEN_MASK, + aifdata); + snd_soc_update_bits(codec, bclk_reg, WM8915_AIF1_BCLK_DIV_MASK, bclk); + snd_soc_update_bits(codec, lrclk_reg, WM8915_AIF1RX_RATE_MASK, + lrclk); + snd_soc_update_bits(codec, WM8915_AIF_CLOCKING_2, + WM8915_DSP1_DIV_SHIFT << dsp_shift, dsp); + + wm8915->rx_rate[dai->id] = params_rate(params); + + return 0; +} + +static int wm8915_set_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + int lfclk = 0; + int ratediv = 0; + int src; + int old; + + /* Disable SYSCLK while we reconfigure */ + old = snd_soc_read(codec, WM8915_AIF_CLOCKING_1); + snd_soc_update_bits(codec, WM8915_AIF_CLOCKING_1, + WM8915_SYSCLK_ENA, 0); + + switch (clk_id) { + case WM8915_SYSCLK_MCLK1: + wm8915->sysclk = freq; + src = 0; + break; + case WM8915_SYSCLK_MCLK2: + wm8915->sysclk = freq; + src = 1; + break; + case WM8915_SYSCLK_FLL: + wm8915->sysclk = freq; + src = 2; + break; + default: + dev_err(codec->dev, "Unsupported clock source %d\n", clk_id); + return -EINVAL; + } + + switch (wm8915->sysclk) { + case 6144000: + snd_soc_update_bits(codec, WM8915_AIF_RATE, + WM8915_SYSCLK_RATE, 0); + break; + case 24576000: + ratediv = WM8915_SYSCLK_DIV; + case 12288000: + snd_soc_update_bits(codec, WM8915_AIF_RATE, + WM8915_SYSCLK_RATE, WM8915_SYSCLK_RATE); + break; + case 32000: + case 32768: + lfclk = WM8915_LFCLK_ENA; + break; + default: + dev_warn(codec->dev, "Unsupported clock rate %dHz\n", + wm8915->sysclk); + return -EINVAL; + } + + snd_soc_update_bits(codec, WM8915_AIF_CLOCKING_1, + WM8915_SYSCLK_SRC_MASK | WM8915_SYSCLK_DIV_MASK, + src << WM8915_SYSCLK_SRC_SHIFT | ratediv); + snd_soc_update_bits(codec, WM8915_CLOCKING_1, WM8915_LFCLK_ENA, lfclk); + snd_soc_update_bits(codec, WM8915_AIF_CLOCKING_1, + WM8915_SYSCLK_ENA, old); + + return 0; +} + +struct _fll_div { + u16 fll_fratio; + u16 fll_outdiv; + u16 fll_refclk_div; + u16 fll_loop_gain; + u16 fll_ref_freq; + u16 n; + u16 theta; + u16 lambda; +}; + +static struct { + unsigned int min; + unsigned int max; + u16 fll_fratio; + int ratio; +} fll_fratios[] = { + { 0, 64000, 4, 16 }, + { 64000, 128000, 3, 8 }, + { 128000, 256000, 2, 4 }, + { 256000, 1000000, 1, 2 }, + { 1000000, 13500000, 0, 1 }, +}; + +static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, + unsigned int Fout) +{ + unsigned int target; + unsigned int div; + unsigned int fratio, gcd_fll; + int i; + + /* Fref must be <=13.5MHz */ + div = 1; + fll_div->fll_refclk_div = 0; + while ((Fref / div) > 13500000) { + div *= 2; + fll_div->fll_refclk_div++; + + if (div > 8) { + pr_err("Can't scale %dMHz input down to <=13.5MHz\n", + Fref); + return -EINVAL; + } + } + + pr_debug("FLL Fref=%u Fout=%u\n", Fref, Fout); + + /* Apply the division for our remaining calculations */ + Fref /= div; + + if (Fref >= 3000000) + fll_div->fll_loop_gain = 5; + else + fll_div->fll_loop_gain = 0; + + if (Fref >= 48000) + fll_div->fll_ref_freq = 0; + else + fll_div->fll_ref_freq = 1; + + /* Fvco should be 90-100MHz; don't check the upper bound */ + div = 2; + while (Fout * div < 90000000) { + div++; + if (div > 64) { + pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", + Fout); + return -EINVAL; + } + } + target = Fout * div; + fll_div->fll_outdiv = div - 1; + + pr_debug("FLL Fvco=%dHz\n", target); + + /* Find an appropraite FLL_FRATIO and factor it out of the target */ + for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) { + if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) { + fll_div->fll_fratio = fll_fratios[i].fll_fratio; + fratio = fll_fratios[i].ratio; + break; + } + } + if (i == ARRAY_SIZE(fll_fratios)) { + pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); + return -EINVAL; + } + + fll_div->n = target / (fratio * Fref); + + if (target % Fref == 0) { + fll_div->theta = 0; + fll_div->lambda = 0; + } else { + gcd_fll = gcd(target, fratio * Fref); + + fll_div->theta = (target - (fll_div->n * fratio * Fref)) + / gcd_fll; + fll_div->lambda = (fratio * Fref) / gcd_fll; + } + + pr_debug("FLL N=%x THETA=%x LAMBDA=%x\n", + fll_div->n, fll_div->theta, fll_div->lambda); + pr_debug("FLL_FRATIO=%x FLL_OUTDIV=%x FLL_REFCLK_DIV=%x\n", + fll_div->fll_fratio, fll_div->fll_outdiv, + fll_div->fll_refclk_div); + + return 0; +} + +static int wm8915_set_fll(struct snd_soc_codec *codec, int fll_id, int source, + unsigned int Fref, unsigned int Fout) +{ + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + struct _fll_div fll_div; + unsigned long timeout; + int ret, reg; + + /* Any change? */ + if (source == wm8915->fll_src && Fref == wm8915->fll_fref && + Fout == wm8915->fll_fout) + return 0; + + if (Fout == 0) { + dev_dbg(codec->dev, "FLL disabled\n"); + + wm8915->fll_fref = 0; + wm8915->fll_fout = 0; + + snd_soc_update_bits(codec, WM8915_FLL_CONTROL_1, + WM8915_FLL_ENA, 0); + + return 0; + } + + ret = fll_factors(&fll_div, Fref, Fout); + if (ret != 0) + return ret; + + switch (source) { + case WM8915_FLL_MCLK1: + reg = 0; + break; + case WM8915_FLL_MCLK2: + reg = 1; + case WM8915_FLL_DACLRCLK1: + reg = 2; + break; + case WM8915_FLL_BCLK1: + reg = 3; + break; + default: + dev_err(codec->dev, "Unknown FLL source %d\n", ret); + return -EINVAL; + } + + reg |= fll_div.fll_refclk_div << WM8915_FLL_REFCLK_DIV_SHIFT; + reg |= fll_div.fll_ref_freq << WM8915_FLL_REF_FREQ_SHIFT; + + snd_soc_update_bits(codec, WM8915_FLL_CONTROL_5, + WM8915_FLL_REFCLK_DIV_MASK | WM8915_FLL_REF_FREQ | + WM8915_FLL_REFCLK_SRC_MASK, reg); + + reg = 0; + if (fll_div.theta || fll_div.lambda) + reg |= WM8915_FLL_EFS_ENA | (3 << WM8915_FLL_LFSR_SEL_SHIFT); + else + reg |= 1 << WM8915_FLL_LFSR_SEL_SHIFT; + snd_soc_write(codec, WM8915_FLL_EFS_2, reg); + + snd_soc_update_bits(codec, WM8915_FLL_CONTROL_2, + WM8915_FLL_OUTDIV_MASK | + WM8915_FLL_FRATIO_MASK, + (fll_div.fll_outdiv << WM8915_FLL_OUTDIV_SHIFT) | + (fll_div.fll_fratio)); + + snd_soc_write(codec, WM8915_FLL_CONTROL_3, fll_div.theta); + + snd_soc_update_bits(codec, WM8915_FLL_CONTROL_4, + WM8915_FLL_N_MASK | WM8915_FLL_LOOP_GAIN_MASK, + (fll_div.n << WM8915_FLL_N_SHIFT) | + fll_div.fll_loop_gain); + + snd_soc_write(codec, WM8915_FLL_EFS_1, fll_div.lambda); + + snd_soc_update_bits(codec, WM8915_FLL_CONTROL_1, + WM8915_FLL_ENA, WM8915_FLL_ENA); + + /* The FLL supports live reconfiguration - kick that in case we were + * already enabled. + */ + snd_soc_write(codec, WM8915_FLL_CONTROL_6, WM8915_FLL_SWITCH_CLK); + + /* Wait for the FLL to lock, using the interrupt if possible */ + if (Fref > 1000000) + timeout = usecs_to_jiffies(300); + else + timeout = msecs_to_jiffies(2); + + wait_for_completion_timeout(&wm8915->fll_lock, timeout); + + dev_dbg(codec->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout); + + wm8915->fll_fref = Fref; + wm8915->fll_fout = Fout; + wm8915->fll_src = source; + + return 0; +} + +#ifdef CONFIG_GPIOLIB +static inline struct wm8915_priv *gpio_to_wm8915(struct gpio_chip *chip) +{ + return container_of(chip, struct wm8915_priv, gpio_chip); +} + +static void wm8915_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct wm8915_priv *wm8915 = gpio_to_wm8915(chip); + struct snd_soc_codec *codec = wm8915->codec; + + snd_soc_update_bits(codec, WM8915_GPIO_1 + offset, + WM8915_GP1_LVL, !!value << WM8915_GP1_LVL_SHIFT); +} + +static int wm8915_gpio_direction_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct wm8915_priv *wm8915 = gpio_to_wm8915(chip); + struct snd_soc_codec *codec = wm8915->codec; + int val; + + val = (1 << WM8915_GP1_FN_SHIFT) | (!!value << WM8915_GP1_LVL_SHIFT); + + return snd_soc_update_bits(codec, WM8915_GPIO_1 + offset, + WM8915_GP1_FN_MASK | WM8915_GP1_DIR | + WM8915_GP1_LVL, val); +} + +static int wm8915_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct wm8915_priv *wm8915 = gpio_to_wm8915(chip); + struct snd_soc_codec *codec = wm8915->codec; + int ret; + + ret = snd_soc_read(codec, WM8915_GPIO_1 + offset); + if (ret < 0) + return ret; + + return (ret & WM8915_GP1_LVL) != 0; +} + +static int wm8915_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct wm8915_priv *wm8915 = gpio_to_wm8915(chip); + struct snd_soc_codec *codec = wm8915->codec; + + return snd_soc_update_bits(codec, WM8915_GPIO_1 + offset, + WM8915_GP1_FN_MASK | WM8915_GP1_DIR, + (1 << WM8915_GP1_FN_SHIFT) | + (1 << WM8915_GP1_DIR_SHIFT)); +} + +static struct gpio_chip wm8915_template_chip = { + .label = "wm8915", + .owner = THIS_MODULE, + .direction_output = wm8915_gpio_direction_out, + .set = wm8915_gpio_set, + .direction_input = wm8915_gpio_direction_in, + .get = wm8915_gpio_get, + .can_sleep = 1, +}; + +static void wm8915_init_gpio(struct snd_soc_codec *codec) +{ + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + int ret; + + wm8915->gpio_chip = wm8915_template_chip; + wm8915->gpio_chip.ngpio = 5; + wm8915->gpio_chip.dev = codec->dev; + + if (wm8915->pdata.gpio_base) + wm8915->gpio_chip.base = wm8915->pdata.gpio_base; + else + wm8915->gpio_chip.base = -1; + + ret = gpiochip_add(&wm8915->gpio_chip); + if (ret != 0) + dev_err(codec->dev, "Failed to add GPIOs: %d\n", ret); +} + +static void wm8915_free_gpio(struct snd_soc_codec *codec) +{ + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + int ret; + + ret = gpiochip_remove(&wm8915->gpio_chip); + if (ret != 0) + dev_err(codec->dev, "Failed to remove GPIOs: %d\n", ret); +} +#else +static void wm8915_init_gpio(struct snd_soc_codec *codec) +{ +} + +static void wm8915_free_gpio(struct snd_soc_codec *codec) +{ +} +#endif + +/** + * wm8915_detect - Enable default WM8915 jack detection + * + * The WM8915 has advanced accessory detection support for headsets. + * This function provides a default implementation which integrates + * the majority of this functionality with minimal user configuration. + * + * This will detect headset, headphone and short circuit button and + * will also detect inverted microphone ground connections and update + * the polarity of the connections. + */ +int wm8915_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, + wm8915_polarity_fn polarity_cb) +{ + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + + wm8915->jack = jack; + wm8915->detecting = true; + wm8915->polarity_cb = polarity_cb; + + if (wm8915->polarity_cb) + wm8915->polarity_cb(codec, 0); + + /* Clear discarge to avoid noise during detection */ + snd_soc_update_bits(codec, WM8915_MICBIAS_1, + WM8915_MICB1_DISCH, 0); + snd_soc_update_bits(codec, WM8915_MICBIAS_2, + WM8915_MICB2_DISCH, 0); + + /* LDO2 powers the microphones, SYSCLK clocks detection */ + snd_soc_dapm_force_enable_pin(&codec->dapm, "LDO2"); + snd_soc_dapm_force_enable_pin(&codec->dapm, "SYSCLK"); + + /* We start off just enabling microphone detection - even a + * plain headphone will trigger detection. + */ + snd_soc_update_bits(codec, WM8915_MIC_DETECT_1, + WM8915_MICD_ENA, WM8915_MICD_ENA); + + /* Slowest detection rate, gives debounce for initial detection */ + snd_soc_update_bits(codec, WM8915_MIC_DETECT_1, + WM8915_MICD_RATE_MASK, + WM8915_MICD_RATE_MASK); + + /* Enable interrupts and we're off */ + snd_soc_update_bits(codec, WM8915_INTERRUPT_STATUS_2_MASK, + WM8915_IM_MICD_EINT, 0); + + return 0; +} +EXPORT_SYMBOL_GPL(wm8915_detect); + +static void wm8915_micd(struct snd_soc_codec *codec) +{ + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + int val, reg; + + val = snd_soc_read(codec, WM8915_MIC_DETECT_3); + + dev_dbg(codec->dev, "Microphone event: %x\n", val); + + if (!(val & WM8915_MICD_VALID)) { + dev_warn(codec->dev, "Microphone detection state invalid\n"); + return; + } + + /* No accessory, reset everything and report removal */ + if (!(val & WM8915_MICD_STS)) { + dev_dbg(codec->dev, "Jack removal detected\n"); + wm8915->jack_mic = false; + wm8915->detecting = true; + snd_soc_jack_report(wm8915->jack, 0, + SND_JACK_HEADSET | SND_JACK_BTN_0); + snd_soc_update_bits(codec, WM8915_MIC_DETECT_1, + WM8915_MICD_RATE_MASK, + WM8915_MICD_RATE_MASK); + return; + } + + /* If the measurement is very high we've got a microphone but + * do a little debounce to account for mechanical issues. + */ + if (val & 0x400) { + dev_dbg(codec->dev, "Microphone detected\n"); + snd_soc_jack_report(wm8915->jack, SND_JACK_HEADSET, + SND_JACK_HEADSET | SND_JACK_BTN_0); + wm8915->jack_mic = true; + wm8915->detecting = false; + } + + /* If we detected a lower impedence during initial startup + * then we probably have the wrong polarity, flip it. Don't + * do this for the lowest impedences to speed up detection of + * plain headphones. + */ + if (wm8915->detecting && (val & 0x3f0)) { + reg = snd_soc_read(codec, WM8915_ACCESSORY_DETECT_MODE_2); + reg ^= WM8915_HPOUT1FB_SRC | WM8915_MICD_SRC | + WM8915_MICD_BIAS_SRC; + snd_soc_update_bits(codec, WM8915_ACCESSORY_DETECT_MODE_2, + WM8915_HPOUT1FB_SRC | WM8915_MICD_SRC | + WM8915_MICD_BIAS_SRC, reg); + + if (wm8915->polarity_cb) + wm8915->polarity_cb(codec, + (reg & WM8915_MICD_SRC) != 0); + + dev_dbg(codec->dev, "Set microphone polarity to %d\n", + (reg & WM8915_MICD_SRC) != 0); + + return; + } + + /* Don't distinguish between buttons, just report any low + * impedence as BTN_0. + */ + if (val & 0x3fc) { + if (wm8915->jack_mic) { + dev_dbg(codec->dev, "Mic button detected\n"); + snd_soc_jack_report(wm8915->jack, + SND_JACK_HEADSET | SND_JACK_BTN_0, + SND_JACK_HEADSET | SND_JACK_BTN_0); + } else { + dev_dbg(codec->dev, "Headphone detected\n"); + snd_soc_jack_report(wm8915->jack, + SND_JACK_HEADPHONE, + SND_JACK_HEADSET | + SND_JACK_BTN_0); + wm8915->detecting = false; + } + } + + /* Increase poll rate to give better responsiveness for buttons */ + if (!wm8915->detecting) + snd_soc_update_bits(codec, WM8915_MIC_DETECT_1, + WM8915_MICD_RATE_MASK, + 5 << WM8915_MICD_RATE_SHIFT); +} + +static irqreturn_t wm8915_irq(int irq, void *data) +{ + struct snd_soc_codec *codec = data; + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + int irq_val; + + irq_val = snd_soc_read(codec, WM8915_INTERRUPT_STATUS_2); + if (irq_val < 0) { + dev_err(codec->dev, "Failed to read IRQ status: %d\n", + irq_val); + return IRQ_NONE; + } + irq_val &= ~snd_soc_read(codec, WM8915_INTERRUPT_STATUS_2_MASK); + + if (irq_val & (WM8915_DCS_DONE_01_EINT | WM8915_DCS_DONE_23_EINT)) { + dev_dbg(codec->dev, "DC servo IRQ\n"); + complete(&wm8915->dcs_done); + } + + if (irq_val & WM8915_FIFOS_ERR_EINT) + dev_err(codec->dev, "Digital core FIFO error\n"); + + if (irq_val & WM8915_FLL_LOCK_EINT) { + dev_dbg(codec->dev, "FLL locked\n"); + complete(&wm8915->fll_lock); + } + + if (irq_val & WM8915_MICD_EINT) + wm8915_micd(codec); + + if (irq_val) { + snd_soc_write(codec, WM8915_INTERRUPT_STATUS_2, irq_val); + + return IRQ_HANDLED; + } else { + return IRQ_NONE; + } +} + +static void wm8915_retune_mobile_pdata(struct snd_soc_codec *codec) +{ + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + struct wm8915_pdata *pdata = &wm8915->pdata; + + struct snd_kcontrol_new controls[] = { + SOC_ENUM_EXT("DSP1 EQ Mode", + wm8915->retune_mobile_enum, + wm8915_get_retune_mobile_enum, + wm8915_put_retune_mobile_enum), + SOC_ENUM_EXT("DSP2 EQ Mode", + wm8915->retune_mobile_enum, + wm8915_get_retune_mobile_enum, + wm8915_put_retune_mobile_enum), + }; + int ret, i, j; + const char **t; + + /* We need an array of texts for the enum API but the number + * of texts is likely to be less than the number of + * configurations due to the sample rate dependency of the + * configurations. */ + wm8915->num_retune_mobile_texts = 0; + wm8915->retune_mobile_texts = NULL; + for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) { + for (j = 0; j < wm8915->num_retune_mobile_texts; j++) { + if (strcmp(pdata->retune_mobile_cfgs[i].name, + wm8915->retune_mobile_texts[j]) == 0) + break; + } + + if (j != wm8915->num_retune_mobile_texts) + continue; + + /* Expand the array... */ + t = krealloc(wm8915->retune_mobile_texts, + sizeof(char *) * + (wm8915->num_retune_mobile_texts + 1), + GFP_KERNEL); + if (t == NULL) + continue; + + /* ...store the new entry... */ + t[wm8915->num_retune_mobile_texts] = + pdata->retune_mobile_cfgs[i].name; + + /* ...and remember the new version. */ + wm8915->num_retune_mobile_texts++; + wm8915->retune_mobile_texts = t; + } + + dev_dbg(codec->dev, "Allocated %d unique ReTune Mobile names\n", + wm8915->num_retune_mobile_texts); + + wm8915->retune_mobile_enum.max = wm8915->num_retune_mobile_texts; + wm8915->retune_mobile_enum.texts = wm8915->retune_mobile_texts; + + ret = snd_soc_add_controls(codec, controls, ARRAY_SIZE(controls)); + if (ret != 0) + dev_err(codec->dev, + "Failed to add ReTune Mobile controls: %d\n", ret); +} + +static int wm8915_probe(struct snd_soc_codec *codec) +{ + int ret; + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + struct i2c_client *i2c = to_i2c_client(codec->dev); + struct snd_soc_dapm_context *dapm = &codec->dapm; + int i, irq_flags; + + wm8915->codec = codec; + + init_completion(&wm8915->dcs_done); + init_completion(&wm8915->fll_lock); + + dapm->idle_bias_off = true; + dapm->bias_level = SND_SOC_BIAS_OFF; + + ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_I2C); + if (ret != 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + goto err; + } + + for (i = 0; i < ARRAY_SIZE(wm8915->supplies); i++) + wm8915->supplies[i].supply = wm8915_supply_names[i]; + + ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8915->supplies), + wm8915->supplies); + if (ret != 0) { + dev_err(codec->dev, "Failed to request supplies: %d\n", ret); + goto err; + } + + wm8915->disable_nb[0].notifier_call = wm8915_regulator_event_0; + wm8915->disable_nb[1].notifier_call = wm8915_regulator_event_1; + wm8915->disable_nb[2].notifier_call = wm8915_regulator_event_2; + wm8915->disable_nb[3].notifier_call = wm8915_regulator_event_3; + wm8915->disable_nb[4].notifier_call = wm8915_regulator_event_4; + wm8915->disable_nb[5].notifier_call = wm8915_regulator_event_5; + + /* This should really be moved into the regulator core */ + for (i = 0; i < ARRAY_SIZE(wm8915->supplies); i++) { + ret = regulator_register_notifier(wm8915->supplies[i].consumer, + &wm8915->disable_nb[i]); + if (ret != 0) { + dev_err(codec->dev, + "Failed to register regulator notifier: %d\n", + ret); + } + } + + ret = regulator_bulk_enable(ARRAY_SIZE(wm8915->supplies), + wm8915->supplies); + if (ret != 0) { + dev_err(codec->dev, "Failed to enable supplies: %d\n", ret); + goto err_get; + } + + if (wm8915->pdata.ldo_ena >= 0) { + gpio_set_value_cansleep(wm8915->pdata.ldo_ena, 1); + msleep(5); + } + + ret = snd_soc_read(codec, WM8915_SOFTWARE_RESET); + if (ret < 0) { + dev_err(codec->dev, "Failed to read ID register: %d\n", ret); + goto err_enable; + } + if (ret != 0x8915) { + dev_err(codec->dev, "Device is not a WM8915, ID %x\n", ret); + ret = -EINVAL; + goto err_enable; + } + + ret = snd_soc_read(codec, WM8915_CHIP_REVISION); + if (ret < 0) { + dev_err(codec->dev, "Failed to read device revision: %d\n", + ret); + goto err_enable; + } + + dev_info(codec->dev, "revision %c\n", + (ret & WM8915_CHIP_REV_MASK) + 'A'); + + if (wm8915->pdata.ldo_ena >= 0) { + gpio_set_value_cansleep(wm8915->pdata.ldo_ena, 0); + } else { + ret = wm8915_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset\n"); + goto err_enable; + } + } + + codec->cache_only = true; + + /* Apply platform data settings */ + snd_soc_update_bits(codec, WM8915_LINE_INPUT_CONTROL, + WM8915_INL_MODE_MASK | WM8915_INR_MODE_MASK, + wm8915->pdata.inl_mode << WM8915_INL_MODE_SHIFT | + wm8915->pdata.inr_mode); + + for (i = 0; i < ARRAY_SIZE(wm8915->pdata.gpio_default); i++) { + if (!wm8915->pdata.gpio_default[i]) + continue; + + snd_soc_write(codec, WM8915_GPIO_1 + i, + wm8915->pdata.gpio_default[i] & 0xffff); + } + + if (wm8915->pdata.spkmute_seq) + snd_soc_update_bits(codec, WM8915_PDM_SPEAKER_MUTE_SEQUENCE, + WM8915_SPK_MUTE_ENDIAN | + WM8915_SPK_MUTE_SEQ1_MASK, + wm8915->pdata.spkmute_seq); + + snd_soc_update_bits(codec, WM8915_ACCESSORY_DETECT_MODE_2, + WM8915_MICD_BIAS_SRC | WM8915_HPOUT1FB_SRC | + WM8915_MICD_SRC, wm8915->pdata.micdet_def); + + /* Latch volume update bits */ + snd_soc_update_bits(codec, WM8915_LEFT_LINE_INPUT_VOLUME, + WM8915_IN1_VU, WM8915_IN1_VU); + snd_soc_update_bits(codec, WM8915_RIGHT_LINE_INPUT_VOLUME, + WM8915_IN1_VU, WM8915_IN1_VU); + + snd_soc_update_bits(codec, WM8915_DAC1_LEFT_VOLUME, + WM8915_DAC1_VU, WM8915_DAC1_VU); + snd_soc_update_bits(codec, WM8915_DAC1_RIGHT_VOLUME, + WM8915_DAC1_VU, WM8915_DAC1_VU); + snd_soc_update_bits(codec, WM8915_DAC2_LEFT_VOLUME, + WM8915_DAC2_VU, WM8915_DAC2_VU); + snd_soc_update_bits(codec, WM8915_DAC2_RIGHT_VOLUME, + WM8915_DAC2_VU, WM8915_DAC2_VU); + + snd_soc_update_bits(codec, WM8915_OUTPUT1_LEFT_VOLUME, + WM8915_DAC1_VU, WM8915_DAC1_VU); + snd_soc_update_bits(codec, WM8915_OUTPUT1_RIGHT_VOLUME, + WM8915_DAC1_VU, WM8915_DAC1_VU); + snd_soc_update_bits(codec, WM8915_OUTPUT2_LEFT_VOLUME, + WM8915_DAC2_VU, WM8915_DAC2_VU); + snd_soc_update_bits(codec, WM8915_OUTPUT2_RIGHT_VOLUME, + WM8915_DAC2_VU, WM8915_DAC2_VU); + + snd_soc_update_bits(codec, WM8915_DSP1_TX_LEFT_VOLUME, + WM8915_DSP1TX_VU, WM8915_DSP1TX_VU); + snd_soc_update_bits(codec, WM8915_DSP1_TX_RIGHT_VOLUME, + WM8915_DSP1TX_VU, WM8915_DSP1TX_VU); + snd_soc_update_bits(codec, WM8915_DSP2_TX_LEFT_VOLUME, + WM8915_DSP2TX_VU, WM8915_DSP2TX_VU); + snd_soc_update_bits(codec, WM8915_DSP2_TX_RIGHT_VOLUME, + WM8915_DSP2TX_VU, WM8915_DSP2TX_VU); + + snd_soc_update_bits(codec, WM8915_DSP1_RX_LEFT_VOLUME, + WM8915_DSP1RX_VU, WM8915_DSP1RX_VU); + snd_soc_update_bits(codec, WM8915_DSP1_RX_RIGHT_VOLUME, + WM8915_DSP1RX_VU, WM8915_DSP1RX_VU); + snd_soc_update_bits(codec, WM8915_DSP2_RX_LEFT_VOLUME, + WM8915_DSP2RX_VU, WM8915_DSP2RX_VU); + snd_soc_update_bits(codec, WM8915_DSP2_RX_RIGHT_VOLUME, + WM8915_DSP2RX_VU, WM8915_DSP2RX_VU); + + /* No support currently for the underclocked TDM modes and + * pick a default TDM layout with each channel pair working with + * slots 0 and 1. */ + snd_soc_update_bits(codec, WM8915_AIF1RX_CHANNEL_0_CONFIGURATION, + WM8915_AIF1RX_CHAN0_SLOTS_MASK | + WM8915_AIF1RX_CHAN0_START_SLOT_MASK, + 1 << WM8915_AIF1RX_CHAN0_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8915_AIF1RX_CHANNEL_1_CONFIGURATION, + WM8915_AIF1RX_CHAN1_SLOTS_MASK | + WM8915_AIF1RX_CHAN1_START_SLOT_MASK, + 1 << WM8915_AIF1RX_CHAN1_SLOTS_SHIFT | 1); + snd_soc_update_bits(codec, WM8915_AIF1RX_CHANNEL_2_CONFIGURATION, + WM8915_AIF1RX_CHAN2_SLOTS_MASK | + WM8915_AIF1RX_CHAN2_START_SLOT_MASK, + 1 << WM8915_AIF1RX_CHAN2_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8915_AIF1RX_CHANNEL_3_CONFIGURATION, + WM8915_AIF1RX_CHAN3_SLOTS_MASK | + WM8915_AIF1RX_CHAN0_START_SLOT_MASK, + 1 << WM8915_AIF1RX_CHAN3_SLOTS_SHIFT | 1); + snd_soc_update_bits(codec, WM8915_AIF1RX_CHANNEL_4_CONFIGURATION, + WM8915_AIF1RX_CHAN4_SLOTS_MASK | + WM8915_AIF1RX_CHAN0_START_SLOT_MASK, + 1 << WM8915_AIF1RX_CHAN4_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8915_AIF1RX_CHANNEL_5_CONFIGURATION, + WM8915_AIF1RX_CHAN5_SLOTS_MASK | + WM8915_AIF1RX_CHAN0_START_SLOT_MASK, + 1 << WM8915_AIF1RX_CHAN5_SLOTS_SHIFT | 1); + + snd_soc_update_bits(codec, WM8915_AIF2RX_CHANNEL_0_CONFIGURATION, + WM8915_AIF2RX_CHAN0_SLOTS_MASK | + WM8915_AIF2RX_CHAN0_START_SLOT_MASK, + 1 << WM8915_AIF2RX_CHAN0_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8915_AIF2RX_CHANNEL_1_CONFIGURATION, + WM8915_AIF2RX_CHAN1_SLOTS_MASK | + WM8915_AIF2RX_CHAN1_START_SLOT_MASK, + 1 << WM8915_AIF2RX_CHAN1_SLOTS_SHIFT | 1); + + snd_soc_update_bits(codec, WM8915_AIF1TX_CHANNEL_0_CONFIGURATION, + WM8915_AIF1TX_CHAN0_SLOTS_MASK | + WM8915_AIF1TX_CHAN0_START_SLOT_MASK, + 1 << WM8915_AIF1TX_CHAN0_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8915_AIF1TX_CHANNEL_1_CONFIGURATION, + WM8915_AIF1TX_CHAN1_SLOTS_MASK | + WM8915_AIF1TX_CHAN0_START_SLOT_MASK, + 1 << WM8915_AIF1TX_CHAN1_SLOTS_SHIFT | 1); + snd_soc_update_bits(codec, WM8915_AIF1TX_CHANNEL_2_CONFIGURATION, + WM8915_AIF1TX_CHAN2_SLOTS_MASK | + WM8915_AIF1TX_CHAN0_START_SLOT_MASK, + 1 << WM8915_AIF1TX_CHAN2_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8915_AIF1TX_CHANNEL_3_CONFIGURATION, + WM8915_AIF1TX_CHAN3_SLOTS_MASK | + WM8915_AIF1TX_CHAN0_START_SLOT_MASK, + 1 << WM8915_AIF1TX_CHAN3_SLOTS_SHIFT | 1); + snd_soc_update_bits(codec, WM8915_AIF1TX_CHANNEL_4_CONFIGURATION, + WM8915_AIF1TX_CHAN4_SLOTS_MASK | + WM8915_AIF1TX_CHAN0_START_SLOT_MASK, + 1 << WM8915_AIF1TX_CHAN4_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8915_AIF1TX_CHANNEL_5_CONFIGURATION, + WM8915_AIF1TX_CHAN5_SLOTS_MASK | + WM8915_AIF1TX_CHAN0_START_SLOT_MASK, + 1 << WM8915_AIF1TX_CHAN5_SLOTS_SHIFT | 1); + + snd_soc_update_bits(codec, WM8915_AIF2TX_CHANNEL_0_CONFIGURATION, + WM8915_AIF2TX_CHAN0_SLOTS_MASK | + WM8915_AIF2TX_CHAN0_START_SLOT_MASK, + 1 << WM8915_AIF2TX_CHAN0_SLOTS_SHIFT | 0); + snd_soc_update_bits(codec, WM8915_AIF1TX_CHANNEL_1_CONFIGURATION, + WM8915_AIF2TX_CHAN1_SLOTS_MASK | + WM8915_AIF2TX_CHAN1_START_SLOT_MASK, + 1 << WM8915_AIF1TX_CHAN1_SLOTS_SHIFT | 1); + + if (wm8915->pdata.num_retune_mobile_cfgs) + wm8915_retune_mobile_pdata(codec); + else + snd_soc_add_controls(codec, wm8915_eq_controls, + ARRAY_SIZE(wm8915_eq_controls)); + + /* If the TX LRCLK pins are not in LRCLK mode configure the + * AIFs to source their clocks from the RX LRCLKs. + */ + if ((snd_soc_read(codec, WM8915_GPIO_1))) + snd_soc_update_bits(codec, WM8915_AIF1_TX_LRCLK_2, + WM8915_AIF1TX_LRCLK_MODE, + WM8915_AIF1TX_LRCLK_MODE); + + if ((snd_soc_read(codec, WM8915_GPIO_2))) + snd_soc_update_bits(codec, WM8915_AIF2_TX_LRCLK_2, + WM8915_AIF2TX_LRCLK_MODE, + WM8915_AIF2TX_LRCLK_MODE); + + regulator_bulk_disable(ARRAY_SIZE(wm8915->supplies), wm8915->supplies); + + wm8915_init_gpio(codec); + + if (i2c->irq) { + if (wm8915->pdata.irq_flags) + irq_flags = wm8915->pdata.irq_flags; + else + irq_flags = IRQF_TRIGGER_LOW; + + irq_flags |= IRQF_ONESHOT; + + ret = request_threaded_irq(i2c->irq, NULL, wm8915_irq, + irq_flags, "wm8915", codec); + if (ret == 0) { + /* Unmask the interrupt */ + snd_soc_update_bits(codec, WM8915_INTERRUPT_CONTROL, + WM8915_IM_IRQ, 0); + + /* Enable error reporting and DC servo status */ + snd_soc_update_bits(codec, + WM8915_INTERRUPT_STATUS_2_MASK, + WM8915_IM_DCS_DONE_23_EINT | + WM8915_IM_DCS_DONE_01_EINT | + WM8915_IM_FLL_LOCK_EINT | + WM8915_IM_FIFOS_ERR_EINT, + 0); + } else { + dev_err(codec->dev, "Failed to request IRQ: %d\n", + ret); + } + } + + return 0; + +err_enable: + if (wm8915->pdata.ldo_ena >= 0) + gpio_set_value_cansleep(wm8915->pdata.ldo_ena, 0); + + regulator_bulk_disable(ARRAY_SIZE(wm8915->supplies), wm8915->supplies); +err_get: + regulator_bulk_free(ARRAY_SIZE(wm8915->supplies), wm8915->supplies); +err: + return ret; +} + +static int wm8915_remove(struct snd_soc_codec *codec) +{ + struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec); + struct i2c_client *i2c = to_i2c_client(codec->dev); + int i; + + snd_soc_update_bits(codec, WM8915_INTERRUPT_CONTROL, + WM8915_IM_IRQ, WM8915_IM_IRQ); + + if (i2c->irq) + free_irq(i2c->irq, codec); + + wm8915_free_gpio(codec); + + for (i = 0; i < ARRAY_SIZE(wm8915->supplies); i++) + regulator_unregister_notifier(wm8915->supplies[i].consumer, + &wm8915->disable_nb[i]); + regulator_bulk_free(ARRAY_SIZE(wm8915->supplies), wm8915->supplies); + + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_wm8915 = { + .probe = wm8915_probe, + .remove = wm8915_remove, + .set_bias_level = wm8915_set_bias_level, + .seq_notifier = wm8915_seq_notifier, + .reg_cache_size = WM8915_MAX_REGISTER + 1, + .reg_word_size = sizeof(u16), + .reg_cache_default = wm8915_reg, + .volatile_register = wm8915_volatile_register, + .readable_register = wm8915_readable_register, + .compress_type = SND_SOC_RBTREE_COMPRESSION, + .controls = wm8915_snd_controls, + .num_controls = ARRAY_SIZE(wm8915_snd_controls), + .dapm_widgets = wm8915_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(wm8915_dapm_widgets), + .dapm_routes = wm8915_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(wm8915_dapm_routes), + .set_pll = wm8915_set_fll, +}; + +#define WM8915_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000) +#define WM8915_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE |\ + SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_ops wm8915_dai_ops = { + .set_fmt = wm8915_set_fmt, + .hw_params = wm8915_hw_params, + .set_sysclk = wm8915_set_sysclk, +}; + +static struct snd_soc_dai_driver wm8915_dai[] = { + { + .name = "wm8915-aif1", + .playback = { + .stream_name = "AIF1 Playback", + .channels_min = 1, + .channels_max = 6, + .rates = WM8915_RATES, + .formats = WM8915_FORMATS, + }, + .capture = { + .stream_name = "AIF1 Capture", + .channels_min = 1, + .channels_max = 6, + .rates = WM8915_RATES, + .formats = WM8915_FORMATS, + }, + .ops = &wm8915_dai_ops, + }, + { + .name = "wm8915-aif2", + .playback = { + .stream_name = "AIF2 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = WM8915_RATES, + .formats = WM8915_FORMATS, + }, + .capture = { + .stream_name = "AIF2 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = WM8915_RATES, + .formats = WM8915_FORMATS, + }, + .ops = &wm8915_dai_ops, + }, +}; + +static __devinit int wm8915_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8915_priv *wm8915; + int ret; + + wm8915 = kzalloc(sizeof(struct wm8915_priv), GFP_KERNEL); + if (wm8915 == NULL) + return -ENOMEM; + + i2c_set_clientdata(i2c, wm8915); + + if (dev_get_platdata(&i2c->dev)) + memcpy(&wm8915->pdata, dev_get_platdata(&i2c->dev), + sizeof(wm8915->pdata)); + + if (wm8915->pdata.ldo_ena > 0) { + ret = gpio_request_one(wm8915->pdata.ldo_ena, + GPIOF_OUT_INIT_LOW, "WM8915 ENA"); + if (ret < 0) { + dev_err(&i2c->dev, "Failed to request GPIO %d: %d\n", + wm8915->pdata.ldo_ena, ret); + goto err; + } + } + + ret = snd_soc_register_codec(&i2c->dev, + &soc_codec_dev_wm8915, wm8915_dai, + ARRAY_SIZE(wm8915_dai)); + if (ret < 0) + goto err_gpio; + + return ret; + +err_gpio: + if (wm8915->pdata.ldo_ena > 0) + gpio_free(wm8915->pdata.ldo_ena); +err: + kfree(wm8915); + + return ret; +} + +static __devexit int wm8915_i2c_remove(struct i2c_client *client) +{ + struct wm8915_priv *wm8915 = i2c_get_clientdata(client); + + snd_soc_unregister_codec(&client->dev); + if (wm8915->pdata.ldo_ena > 0) + gpio_free(wm8915->pdata.ldo_ena); + kfree(i2c_get_clientdata(client)); + return 0; +} + +static const struct i2c_device_id wm8915_i2c_id[] = { + { "wm8915", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8915_i2c_id); + +static struct i2c_driver wm8915_i2c_driver = { + .driver = { + .name = "wm8915", + .owner = THIS_MODULE, + }, + .probe = wm8915_i2c_probe, + .remove = __devexit_p(wm8915_i2c_remove), + .id_table = wm8915_i2c_id, +}; + +static int __init wm8915_modinit(void) +{ + int ret; + + ret = i2c_add_driver(&wm8915_i2c_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register WM8915 I2C driver: %d\n", + ret); + } + + return ret; +} +module_init(wm8915_modinit); + +static void __exit wm8915_exit(void) +{ + i2c_del_driver(&wm8915_i2c_driver); +} +module_exit(wm8915_exit); + +MODULE_DESCRIPTION("ASoC WM8915 driver"); +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_LICENSE("GPL"); |