diff options
Diffstat (limited to 'sound/soc/codecs/wm_hubs.c')
| -rw-r--r-- | sound/soc/codecs/wm_hubs.c | 83 |
1 files changed, 51 insertions, 32 deletions
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index 0ad9f5d536c..e1f225a3ac4 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -62,21 +62,27 @@ static const char *speaker_mode_text[] = { static const struct soc_enum speaker_mode = SOC_ENUM_SINGLE(WM8993_SPKMIXR_ATTENUATION, 8, 2, speaker_mode_text); -static void wait_for_dc_servo(struct snd_soc_codec *codec) +static void wait_for_dc_servo(struct snd_soc_codec *codec, unsigned int op) { unsigned int reg; int count = 0; + unsigned int val; + + val = op | WM8993_DCS_ENA_CHAN_0 | WM8993_DCS_ENA_CHAN_1; + + /* Trigger the command */ + snd_soc_write(codec, WM8993_DC_SERVO_0, val); dev_dbg(codec->dev, "Waiting for DC servo...\n"); do { count++; msleep(1); - reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_0); + reg = snd_soc_read(codec, WM8993_DC_SERVO_0); dev_dbg(codec->dev, "DC servo: %x\n", reg); - } while (reg & WM8993_DCS_DATAPATH_BUSY); + } while (reg & op && count < 400); - if (reg & WM8993_DCS_DATAPATH_BUSY) + if (reg & op) dev_err(codec->dev, "Timed out waiting for DC Servo\n"); } @@ -86,51 +92,58 @@ static void wait_for_dc_servo(struct snd_soc_codec *codec) static void calibrate_dc_servo(struct snd_soc_codec *codec) { struct wm_hubs_data *hubs = codec->private_data; - u16 reg, dcs_cfg; + u16 reg, reg_l, reg_r, dcs_cfg; /* Set for 32 series updates */ snd_soc_update_bits(codec, WM8993_DC_SERVO_1, WM8993_DCS_SERIES_NO_01_MASK, 32 << WM8993_DCS_SERIES_NO_01_SHIFT); - - /* Enable the DC servo. Write all bits to avoid triggering startup - * or write calibration. - */ - snd_soc_update_bits(codec, WM8993_DC_SERVO_0, - 0xFFFF, - WM8993_DCS_ENA_CHAN_0 | - WM8993_DCS_ENA_CHAN_1 | - WM8993_DCS_TRIG_SERIES_1 | - WM8993_DCS_TRIG_SERIES_0); - - wait_for_dc_servo(codec); + wait_for_dc_servo(codec, + WM8993_DCS_TRIG_SERIES_0 | WM8993_DCS_TRIG_SERIES_1); /* Apply correction to DC servo result */ if (hubs->dcs_codes) { dev_dbg(codec->dev, "Applying %d code DC servo correction\n", hubs->dcs_codes); + /* Different chips in the family support different + * readback methods. + */ + switch (hubs->dcs_readback_mode) { + case 0: + reg_l = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_1) + & WM8993_DCS_INTEG_CHAN_0_MASK;; + reg_r = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2) + & WM8993_DCS_INTEG_CHAN_1_MASK; + break; + case 1: + reg = snd_soc_read(codec, WM8993_DC_SERVO_3); + reg_l = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK) + >> WM8993_DCS_DAC_WR_VAL_1_SHIFT; + reg_r = reg & WM8993_DCS_DAC_WR_VAL_0_MASK; + break; + default: + WARN(1, "Unknown DCS readback method"); + break; + } + /* HPOUT1L */ - reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_1) & - WM8993_DCS_INTEG_CHAN_0_MASK;; - reg += hubs->dcs_codes; - dcs_cfg = reg << WM8993_DCS_DAC_WR_VAL_1_SHIFT; + if (reg_l + hubs->dcs_codes > 0 && + reg_l + hubs->dcs_codes < 0xff) + reg_l += hubs->dcs_codes; + dcs_cfg = reg_l << WM8993_DCS_DAC_WR_VAL_1_SHIFT; /* HPOUT1R */ - reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2) & - WM8993_DCS_INTEG_CHAN_1_MASK; - reg += hubs->dcs_codes; - dcs_cfg |= reg; + if (reg_r + hubs->dcs_codes > 0 && + reg_r + hubs->dcs_codes < 0xff) + reg_r += hubs->dcs_codes; + dcs_cfg |= reg_r; /* Do it */ snd_soc_write(codec, WM8993_DC_SERVO_3, dcs_cfg); - snd_soc_update_bits(codec, WM8993_DC_SERVO_0, - WM8993_DCS_TRIG_DAC_WR_0 | - WM8993_DCS_TRIG_DAC_WR_1, - WM8993_DCS_TRIG_DAC_WR_0 | - WM8993_DCS_TRIG_DAC_WR_1); - - wait_for_dc_servo(codec); + wait_for_dc_servo(codec, + WM8993_DCS_TRIG_DAC_WR_0 | + WM8993_DCS_TRIG_DAC_WR_1); } } @@ -141,10 +154,16 @@ static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + struct wm_hubs_data *hubs = codec->private_data; int ret; ret = snd_soc_put_volsw_2r(kcontrol, ucontrol); + /* If we're applying an offset correction then updating the + * callibration would be likely to introduce further offsets. */ + if (hubs->dcs_codes) + return ret; + /* Only need to do this if the outputs are active */ if (snd_soc_read(codec, WM8993_POWER_MANAGEMENT_1) & (WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA)) |