diff options
Diffstat (limited to 'sound/soc/codecs')
34 files changed, 9606 insertions, 571 deletions
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 1db04a28a53..e0b9869df0f 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1,16 +1,80 @@ +config SND_SOC_ALL_CODECS + tristate "Build all ASoC CODEC drivers" + depends on I2C + select SPI + select SPI_MASTER + select SND_SOC_AK4535 + select SND_SOC_CS4270 + select SND_SOC_SSM2602 + select SND_SOC_TLV320AIC26 + select SND_SOC_TLV320AIC3X + select SND_SOC_UDA1380 + select SND_SOC_WM8510 + select SND_SOC_WM8580 + select SND_SOC_WM8731 + select SND_SOC_WM8750 + select SND_SOC_WM8753 + select SND_SOC_WM8900 + select SND_SOC_WM8903 + select SND_SOC_WM8971 + select SND_SOC_WM8990 + help + Normally ASoC codec drivers are only built if a machine driver which + uses them is also built since they are only usable with a machine + driver. Selecting this option will allow these drivers to be built + without an explicit machine driver for test and development purposes. + + If unsure select "N". + + config SND_SOC_AC97_CODEC tristate select SND_AC97_CODEC +config SND_SOC_AD1980 + tristate + config SND_SOC_AK4535 tristate +# Cirrus Logic CS4270 Codec +config SND_SOC_CS4270 + tristate + +# Cirrus Logic CS4270 Codec Hardware Mute Support +# Select if you have external muting circuitry attached to your CS4270. +config SND_SOC_CS4270_HWMUTE + bool + depends on SND_SOC_CS4270 + +# Cirrus Logic CS4270 Codec VD = 3.3V Errata +# Select if you are affected by the errata where the part will not function +# if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will +# not select any sample rates that require MCLK to be divided by 1.5. +config SND_SOC_CS4270_VD33_ERRATA + bool + depends on SND_SOC_CS4270 + +config SND_SOC_SSM2602 + tristate + +config SND_SOC_TLV320AIC26 + tristate "TI TLV320AIC26 Codec support" + depends on SND_SOC && SPI + +config SND_SOC_TLV320AIC3X + tristate + depends on I2C + config SND_SOC_UDA1380 tristate config SND_SOC_WM8510 tristate +config SND_SOC_WM8580 + tristate + config SND_SOC_WM8731 tristate @@ -20,33 +84,20 @@ config SND_SOC_WM8750 config SND_SOC_WM8753 tristate -config SND_SOC_WM8990 +config SND_SOC_WM8900 tristate -config SND_SOC_WM9712 +config SND_SOC_WM8903 tristate -config SND_SOC_WM9713 +config SND_SOC_WM8971 tristate -# Cirrus Logic CS4270 Codec -config SND_SOC_CS4270 +config SND_SOC_WM8990 tristate -# Cirrus Logic CS4270 Codec Hardware Mute Support -# Select if you have external muting circuitry attached to your CS4270. -config SND_SOC_CS4270_HWMUTE - bool - depends on SND_SOC_CS4270 - -# Cirrus Logic CS4270 Codec VD = 3.3V Errata -# Select if you are affected by the errata where the part will not function -# if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will -# not select any sample rates that require MCLK to be divided by 1.5. -config SND_SOC_CS4270_VD33_ERRATA - bool - depends on SND_SOC_CS4270 +config SND_SOC_WM9712 + tristate -config SND_SOC_TLV320AIC3X +config SND_SOC_WM9713 tristate - depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index d7b97abcf72..f977978a340 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -1,25 +1,39 @@ snd-soc-ac97-objs := ac97.o +snd-soc-ad1980-objs := ad1980.o snd-soc-ak4535-objs := ak4535.o +snd-soc-cs4270-objs := cs4270.o +snd-soc-ssm2602-objs := ssm2602.o +snd-soc-tlv320aic26-objs := tlv320aic26.o +snd-soc-tlv320aic3x-objs := tlv320aic3x.o snd-soc-uda1380-objs := uda1380.o snd-soc-wm8510-objs := wm8510.o +snd-soc-wm8580-objs := wm8580.o snd-soc-wm8731-objs := wm8731.o snd-soc-wm8750-objs := wm8750.o snd-soc-wm8753-objs := wm8753.o +snd-soc-wm8900-objs := wm8900.o +snd-soc-wm8903-objs := wm8903.o +snd-soc-wm8971-objs := wm8971.o snd-soc-wm8990-objs := wm8990.o snd-soc-wm9712-objs := wm9712.o snd-soc-wm9713-objs := wm9713.o -snd-soc-cs4270-objs := cs4270.o -snd-soc-tlv320aic3x-objs := tlv320aic3x.o obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o +obj-$(CONFIG_SND_SOC_AD1980) += snd-soc-ad1980.o obj-$(CONFIG_SND_SOC_AK4535) += snd-soc-ak4535.o +obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o +obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o +obj-$(CONFIG_SND_SOC_TLV320AIC26) += snd-soc-tlv320aic26.o +obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o obj-$(CONFIG_SND_SOC_UDA1380) += snd-soc-uda1380.o obj-$(CONFIG_SND_SOC_WM8510) += snd-soc-wm8510.o +obj-$(CONFIG_SND_SOC_WM8580) += snd-soc-wm8580.o obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o +obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o +obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o +obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o -obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o -obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c new file mode 100644 index 00000000000..4e09c1f2c06 --- /dev/null +++ b/sound/soc/codecs/ad1980.c @@ -0,0 +1,309 @@ +/* + * ad1980.c -- ALSA Soc AD1980 codec support + * + * Copyright: Analog Device Inc. + * Author: Roy Huang <roy.huang@analog.com> + * Cliff Cai <cliff.cai@analog.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/ac97_codec.h> +#include <sound/initval.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include "ad1980.h" + +static unsigned int ac97_read(struct snd_soc_codec *codec, + unsigned int reg); +static int ac97_write(struct snd_soc_codec *codec, + unsigned int reg, unsigned int val); + +/* + * AD1980 register cache + */ +static const u16 ad1980_reg[] = { + 0x0090, 0x8000, 0x8000, 0x8000, /* 0 - 6 */ + 0x0000, 0x0000, 0x8008, 0x8008, /* 8 - e */ + 0x8808, 0x8808, 0x0000, 0x8808, /* 10 - 16 */ + 0x8808, 0x0000, 0x8000, 0x0000, /* 18 - 1e */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 20 - 26 */ + 0x03c7, 0x0000, 0xbb80, 0xbb80, /* 28 - 2e */ + 0xbb80, 0xbb80, 0x0000, 0x8080, /* 30 - 36 */ + 0x8080, 0x2000, 0x0000, 0x0000, /* 38 - 3e */ + 0x0000, 0x0000, 0x0000, 0x0000, /* reserved */ + 0x0000, 0x0000, 0x0000, 0x0000, /* reserved */ + 0x0000, 0x0000, 0x0000, 0x0000, /* reserved */ + 0x0000, 0x0000, 0x0000, 0x0000, /* reserved */ + 0x8080, 0x0000, 0x0000, 0x0000, /* 60 - 66 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* reserved */ + 0x0000, 0x0000, 0x1001, 0x0000, /* 70 - 76 */ + 0x0000, 0x0000, 0x4144, 0x5370 /* 78 - 7e */ +}; + +static const char *ad1980_rec_sel[] = {"Mic", "CD", "NC", "AUX", "Line", + "Stereo Mix", "Mono Mix", "Phone"}; + +static const struct soc_enum ad1980_cap_src = + SOC_ENUM_DOUBLE(AC97_REC_SEL, 8, 0, 7, ad1980_rec_sel); + +static const struct snd_kcontrol_new ad1980_snd_ac97_controls[] = { +SOC_DOUBLE("Master Playback Volume", AC97_MASTER, 8, 0, 31, 1), +SOC_SINGLE("Master Playback Switch", AC97_MASTER, 15, 1, 1), + +SOC_DOUBLE("Headphone Playback Volume", AC97_HEADPHONE, 8, 0, 31, 1), +SOC_SINGLE("Headphone Playback Switch", AC97_HEADPHONE, 15, 1, 1), + +SOC_DOUBLE("PCM Playback Volume", AC97_PCM, 8, 0, 31, 1), +SOC_SINGLE("PCM Playback Switch", AC97_PCM, 15, 1, 1), + +SOC_DOUBLE("PCM Capture Volume", AC97_REC_GAIN, 8, 0, 31, 0), +SOC_SINGLE("PCM Capture Switch", AC97_REC_GAIN, 15, 1, 1), + +SOC_SINGLE("Mono Playback Volume", AC97_MASTER_MONO, 0, 31, 1), +SOC_SINGLE("Mono Playback Switch", AC97_MASTER_MONO, 15, 1, 1), + +SOC_SINGLE("Phone Capture Volume", AC97_PHONE, 0, 31, 1), +SOC_SINGLE("Phone Capture Switch", AC97_PHONE, 15, 1, 1), + +SOC_SINGLE("Mic Volume", AC97_MIC, 0, 31, 1), +SOC_SINGLE("Mic Switch", AC97_MIC, 15, 1, 1), + +SOC_SINGLE("Stereo Mic Switch", AC97_AD_MISC, 6, 1, 0), +SOC_DOUBLE("Line HP Swap Switch", AC97_AD_MISC, 10, 5, 1, 0), + +SOC_DOUBLE("Surround Playback Volume", AC97_SURROUND_MASTER, 8, 0, 31, 1), +SOC_DOUBLE("Surround Playback Switch", AC97_SURROUND_MASTER, 15, 7, 1, 1), + +SOC_ENUM("Capture Source", ad1980_cap_src), + +SOC_SINGLE("Mic Boost Switch", AC97_MIC, 6, 1, 0), +}; + +/* add non dapm controls */ +static int ad1980_add_controls(struct snd_soc_codec *codec) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(ad1980_snd_ac97_controls); i++) { + err = snd_ctl_add(codec->card, snd_soc_cnew( + &ad1980_snd_ac97_controls[i], codec, NULL)); + if (err < 0) + return err; + } + return 0; +} + +static unsigned int ac97_read(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + + switch (reg) { + case AC97_RESET: + case AC97_INT_PAGING: + case AC97_POWERDOWN: + case AC97_EXTENDED_STATUS: + case AC97_VENDOR_ID1: + case AC97_VENDOR_ID2: + return soc_ac97_ops.read(codec->ac97, reg); + default: + reg = reg >> 1; + + if (reg >= (ARRAY_SIZE(ad1980_reg))) + return -EINVAL; + + return cache[reg]; + } +} + +static int ac97_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int val) +{ + u16 *cache = codec->reg_cache; + + soc_ac97_ops.write(codec->ac97, reg, val); + reg = reg >> 1; + if (reg < (ARRAY_SIZE(ad1980_reg))) + cache[reg] = val; + + return 0; +} + +struct snd_soc_dai ad1980_dai = { + .name = "AC97", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, }, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_48000, + .formats = SNDRV_PCM_FMTBIT_S16_LE, }, +}; +EXPORT_SYMBOL_GPL(ad1980_dai); + +static int ad1980_reset(struct snd_soc_codec *codec, int try_warm) +{ + u16 retry_cnt = 0; + +retry: + if (try_warm && soc_ac97_ops.warm_reset) { + soc_ac97_ops.warm_reset(codec->ac97); + if (ac97_read(codec, AC97_RESET) == 0x0090) + return 1; + } + + soc_ac97_ops.reset(codec->ac97); + /* Set bit 16slot in register 74h, then every slot will has only 16 + * bits. This command is sent out in 20bit mode, in which case the + * first nibble of data is eaten by the addr. (Tag is always 16 bit)*/ + ac97_write(codec, AC97_AD_SERIAL_CFG, 0x9900); + + if (ac97_read(codec, AC97_RESET) != 0x0090) + goto err; + return 0; + +err: + while (retry_cnt++ < 10) + goto retry; + + printk(KERN_ERR "AD1980 AC97 reset failed\n"); + return -EIO; +} + +static int ad1980_soc_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0; + u16 vendor_id2; + + printk(KERN_INFO "AD1980 SoC Audio Codec\n"); + + socdev->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (socdev->codec == NULL) + return -ENOMEM; + codec = socdev->codec; + mutex_init(&codec->mutex); + + codec->reg_cache = + kzalloc(sizeof(u16) * ARRAY_SIZE(ad1980_reg), GFP_KERNEL); + if (codec->reg_cache == NULL) { + ret = -ENOMEM; + goto cache_err; + } + memcpy(codec->reg_cache, ad1980_reg, sizeof(u16) * \ + ARRAY_SIZE(ad1980_reg)); + codec->reg_cache_size = sizeof(u16) * ARRAY_SIZE(ad1980_reg); + codec->reg_cache_step = 2; + codec->name = "AD1980"; + codec->owner = THIS_MODULE; + codec->dai = &ad1980_dai; + codec->num_dai = 1; + codec->write = ac97_write; + codec->read = ac97_read; + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0); + if (ret < 0) { + printk(KERN_ERR "ad1980: failed to register AC97 codec\n"); + goto codec_err; + } + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) + goto pcm_err; + + + ret = ad1980_reset(codec, 0); + if (ret < 0) { + printk(KERN_ERR "AC97 link error\n"); + goto reset_err; + } + + /* Read out vendor ID to make sure it is ad1980 */ + if (ac97_read(codec, AC97_VENDOR_ID1) != 0x4144) + goto reset_err; + + vendor_id2 = ac97_read(codec, AC97_VENDOR_ID2); + + if (vendor_id2 != 0x5370) { + if (vendor_id2 != 0x5374) + goto reset_err; + else + printk(KERN_WARNING "ad1980: " + "Found AD1981 - only 2/2 IN/OUT Channels " + "supported\n"); + } + + ac97_write(codec, AC97_MASTER, 0x0000); /* unmute line out volume */ + ac97_write(codec, AC97_PCM, 0x0000); /* unmute PCM out volume */ + ac97_write(codec, AC97_REC_GAIN, 0x0000);/* unmute record volume */ + + ad1980_add_controls(codec); + ret = snd_soc_register_card(socdev); + if (ret < 0) { + printk(KERN_ERR "ad1980: failed to register card\n"); + goto reset_err; + } + + return 0; + +reset_err: + snd_soc_free_pcms(socdev); + +pcm_err: + snd_soc_free_ac97_codec(codec); + +codec_err: + kfree(codec->reg_cache); + +cache_err: + kfree(socdev->codec); + socdev->codec = NULL; + return ret; +} + +static int ad1980_soc_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + if (codec == NULL) + return 0; + + snd_soc_dapm_free(socdev); + snd_soc_free_pcms(socdev); + snd_soc_free_ac97_codec(codec); + kfree(codec->reg_cache); + kfree(codec); + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_ad1980 = { + .probe = ad1980_soc_probe, + .remove = ad1980_soc_remove, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_ad1980); + +MODULE_DESCRIPTION("ASoC ad1980 driver"); +MODULE_AUTHOR("Roy Huang, Cliff Cai"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/ad1980.h b/sound/soc/codecs/ad1980.h new file mode 100644 index 00000000000..db6c8500d66 --- /dev/null +++ b/sound/soc/codecs/ad1980.h @@ -0,0 +1,23 @@ +/* + * ad1980.h -- ad1980 Soc Audio driver + */ + +#ifndef _AD1980_H +#define _AD1980_H +/* Bit definition of Power-Down Control/Status Register */ +#define ADC 0x0001 +#define DAC 0x0002 +#define ANL 0x0004 +#define REF 0x0008 +#define PR0 0x0100 +#define PR1 0x0200 +#define PR2 0x0400 +#define PR3 0x0800 +#define PR4 0x1000 +#define PR5 0x2000 +#define PR6 0x4000 + +extern struct snd_soc_dai ad1980_dai; +extern struct snd_soc_codec_device soc_codec_dev_ad1980; + +#endif diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c index b26003c4f3e..088cf992772 100644 --- a/sound/soc/codecs/ak4535.c +++ b/sound/soc/codecs/ak4535.c @@ -535,89 +535,85 @@ static struct snd_soc_device *ak4535_socdev; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) -#define I2C_DRIVERID_AK4535 0xfefe /* liam - need a proper id */ - -static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; - -/* Magic definition of all other variables and things */ -I2C_CLIENT_INSMOD; - -static struct i2c_driver ak4535_i2c_driver; -static struct i2c_client client_template; - -/* If the i2c layer weren't so broken, we could pass this kind of data - around */ -static int ak4535_codec_probe(struct i2c_adapter *adap, int addr, int kind) +static int ak4535_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) { struct snd_soc_device *socdev = ak4535_socdev; - struct ak4535_setup_data *setup = socdev->codec_data; struct snd_soc_codec *codec = socdev->codec; - struct i2c_client *i2c; int ret; - if (addr != setup->i2c_address) - return -ENODEV; - - client_template.adapter = adap; - client_template.addr = addr; - - i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); - return -ENOMEM; - } i2c_set_clientdata(i2c, codec); codec->control_data = i2c; - ret = i2c_attach_client(i2c); - if (ret < 0) { - printk(KERN_ERR "failed to attach codec at addr %x\n", addr); - goto err; - } - ret = ak4535_init(socdev); - if (ret < 0) { + if (ret < 0) printk(KERN_ERR "failed to initialise AK4535\n"); - goto err; - } - return ret; -err: - kfree(codec); - kfree(i2c); return ret; } -static int ak4535_i2c_detach(struct i2c_client *client) +static int ak4535_i2c_remove(struct i2c_client *client) { struct snd_soc_codec *codec = i2c_get_clientdata(client); - i2c_detach_client(client); kfree(codec->reg_cache); - kfree(client); return 0; } -static int ak4535_i2c_attach(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, ak4535_codec_probe); -} +static const struct i2c_device_id ak4535_i2c_id[] = { + { "ak4535", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ak4535_i2c_id); -/* corgi i2c codec control layer */ static struct i2c_driver ak4535_i2c_driver = { .driver = { .name = "AK4535 I2C Codec", .owner = THIS_MODULE, }, - .id = I2C_DRIVERID_AK4535, - .attach_adapter = ak4535_i2c_attach, - .detach_client = ak4535_i2c_detach, - .command = NULL, + .probe = ak4535_i2c_probe, + .remove = ak4535_i2c_remove, + .id_table = ak4535_i2c_id, }; -static struct i2c_client client_template = { - .name = "AK4535", - .driver = &ak4535_i2c_driver, -}; +static int ak4535_add_i2c_device(struct platform_device *pdev, + const struct ak4535_setup_data *setup) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + int ret; + + ret = i2c_add_driver(&ak4535_i2c_driver); + if (ret != 0) { + dev_err(&pdev->dev, "can't add i2c driver\n"); + return ret; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = setup->i2c_address; + strlcpy(info.type, "ak4535", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(setup->i2c_bus); + if (!adapter) { + dev_err(&pdev->dev, "can't get i2c adapter %d\n", + setup->i2c_bus); + goto err_driver; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + goto err_driver; + } + + return 0; + +err_driver: + i2c_del_driver(&ak4535_i2c_driver); + return -ENODEV; +} #endif static int ak4535_probe(struct platform_device *pdev) @@ -626,7 +622,7 @@ static int ak4535_probe(struct platform_device *pdev) struct ak4535_setup_data *setup; struct snd_soc_codec *codec; struct ak4535_priv *ak4535; - int ret = 0; + int ret; printk(KERN_INFO "AK4535 Audio Codec %s", AK4535_VERSION); @@ -648,18 +644,20 @@ static int ak4535_probe(struct platform_device *pdev) INIT_LIST_HEAD(&codec->dapm_paths); ak4535_socdev = socdev; + ret = -ENODEV; + #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) if (setup->i2c_address) { - normal_i2c[0] = setup->i2c_address; codec->hw_write = (hw_write_t)i2c_master_send; codec->hw_read = (hw_read_t)i2c_master_recv; - ret = i2c_add_driver(&ak4535_i2c_driver); - if (ret != 0) - printk(KERN_ERR "can't add i2c driver"); + ret = ak4535_add_i2c_device(pdev, setup); } -#else - /* Add other interfaces here */ #endif + + if (ret != 0) { + kfree(codec->private_data); + kfree(codec); + } return ret; } @@ -675,6 +673,7 @@ static int ak4535_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_unregister_device(codec->control_data); i2c_del_driver(&ak4535_i2c_driver); #endif kfree(codec->private_data); diff --git a/sound/soc/codecs/ak4535.h b/sound/soc/codecs/ak4535.h index e9fe30e2c05..c7a58703ea3 100644 --- a/sound/soc/codecs/ak4535.h +++ b/sound/soc/codecs/ak4535.h @@ -37,6 +37,7 @@ #define AK4535_CACHEREGNUM 0x10 struct ak4535_setup_data { + int i2c_bus; unsigned short i2c_address; }; diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 9deb8c74fdf..0bbd94501d7 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -490,34 +490,7 @@ static int cs4270_mute(struct snd_soc_dai *dai, int mute) #endif -static int cs4270_i2c_probe(struct i2c_adapter *adap, int addr, int kind); - -/* - * Notify the driver that a new I2C bus has been found. - * - * This function is called for each I2C bus in the system. The function - * then asks the I2C subsystem to probe that bus at the addresses on which - * our device (the CS4270) could exist. If a device is found at one of - * those addresses, then our probe function (cs4270_i2c_probe) is called. - */ -static int cs4270_i2c_attach(struct i2c_adapter *adapter) -{ - return i2c_probe(adapter, &addr_data, cs4270_i2c_probe); -} - -static int cs4270_i2c_detach(struct i2c_client *client) -{ - struct snd_soc_codec *codec = i2c_get_clientdata(client); - - i2c_detach_client(client); - codec->control_data = NULL; - - kfree(codec->reg_cache); - codec->reg_cache = NULL; - - kfree(client); - return 0; -} +static int cs4270_i2c_probe(struct i2c_client *, const struct i2c_device_id *); /* A list of non-DAPM controls that the CS4270 supports */ static const struct snd_kcontrol_new cs4270_snd_controls[] = { @@ -525,14 +498,19 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = { CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1) }; +static const struct i2c_device_id cs4270_id[] = { + {"cs4270", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, cs4270_id); + static struct i2c_driver cs4270_i2c_driver = { .driver = { .name = "CS4270 I2C", .owner = THIS_MODULE, }, - .id = I2C_DRIVERID_CS4270, - .attach_adapter = cs4270_i2c_attach, - .detach_client = cs4270_i2c_detach, + .id_table = cs4270_id, + .probe = cs4270_i2c_probe, }; /* @@ -561,11 +539,11 @@ static struct snd_soc_device *cs4270_socdev; * Note: snd_soc_new_pcms() must be called before this function can be called, * because of snd_ctl_add(). */ -static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) +static int cs4270_i2c_probe(struct i2c_client *i2c_client, + const struct i2c_device_id *id) { struct snd_soc_device *socdev = cs4270_socdev; struct snd_soc_codec *codec = socdev->codec; - struct i2c_client *i2c_client = NULL; int i; int ret = 0; @@ -578,12 +556,6 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) /* Note: codec_dai->codec is NULL here */ - i2c_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!i2c_client) { - printk(KERN_ERR "cs4270: could not allocate I2C client\n"); - return -ENOMEM; - } - codec->reg_cache = kzalloc(CS4270_NUMREGS, GFP_KERNEL); if (!codec->reg_cache) { printk(KERN_ERR "cs4270: could not allocate register cache\n"); @@ -591,13 +563,6 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) goto error; } - i2c_set_clientdata(i2c_client, codec); - strcpy(i2c_client->name, "CS4270"); - - i2c_client->driver = &cs4270_i2c_driver; - i2c_client->adapter = adapter; - i2c_client->addr = addr; - /* Verify that we have a CS4270 */ ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID); @@ -612,18 +577,10 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) goto error; } - printk(KERN_INFO "cs4270: found device at I2C address %X\n", addr); + printk(KERN_INFO "cs4270: found device at I2C address %X\n", + i2c_client->addr); printk(KERN_INFO "cs4270: hardware revision %X\n", ret & 0xF); - /* Tell the I2C layer a new client has arrived */ - - ret = i2c_attach_client(i2c_client); - if (ret) { - printk(KERN_ERR "cs4270: could not attach codec, " - "I2C address %x, error code %i\n", addr, ret); - goto error; - } - codec->control_data = i2c_client; codec->read = cs4270_read_reg_cache; codec->write = cs4270_i2c_write; @@ -648,20 +605,17 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind) goto error; } + i2c_set_clientdata(i2c_client, codec); + return 0; error: - if (codec->control_data) { - i2c_detach_client(i2c_client); - codec->control_data = NULL; - } + codec->control_data = NULL; kfree(codec->reg_cache); codec->reg_cache = NULL; codec->reg_cache_size = 0; - kfree(i2c_client); - return ret; } @@ -727,7 +681,7 @@ static int cs4270_probe(struct platform_device *pdev) ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); if (ret < 0) { printk(KERN_ERR "cs4270: failed to create PCMs\n"); - return ret; + goto error_free_codec; } #ifdef USE_I2C @@ -736,8 +690,7 @@ static int cs4270_probe(struct platform_device *pdev) ret = i2c_add_driver(&cs4270_i2c_driver); if (ret) { printk(KERN_ERR "cs4270: failed to attach driver"); - snd_soc_free_pcms(socdev); - return ret; + goto error_free_pcms; } /* Did we find a CS4270 on the I2C bus? */ @@ -759,10 +712,23 @@ static int cs4270_probe(struct platform_device *pdev) ret = snd_soc_register_card(socdev); if (ret < 0) { printk(KERN_ERR "cs4270: failed to register card\n"); - snd_soc_free_pcms(socdev); - return ret; + goto error_del_driver; } + return 0; + +error_del_driver: +#ifdef USE_I2C + i2c_del_driver(&cs4270_i2c_driver); + +error_free_pcms: +#endif + snd_soc_free_pcms(socdev); + +error_free_codec: + kfree(socdev->codec); + socdev->codec = NULL; + return ret; } @@ -773,8 +739,7 @@ static int cs4270_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); #ifdef USE_I2C - if (socdev->codec->control_data) - i2c_del_driver(&cs4270_i2c_driver); + i2c_del_driver(&cs4270_i2c_driver); #endif kfree(socdev->codec); diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c new file mode 100644 index 00000000000..940ce1c3522 --- /dev/null +++ b/sound/soc/codecs/ssm2602.c @@ -0,0 +1,776 @@ +/* + * File: sound/soc/codecs/ssm2602.c + * Author: Cliff Cai <Cliff.Cai@analog.com> + * + * Created: Tue June 06 2008 + * Description: Driver for ssm2602 sound chip + * + * Modified: + * Copyright 2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> + +#include "ssm2602.h" + +#define AUDIO_NAME "ssm2602" +#define SSM2602_VERSION "0.1" + +struct snd_soc_codec_device soc_codec_dev_ssm2602; + +/* codec private data */ +struct ssm2602_priv { + unsigned int sysclk; + struct snd_pcm_substream *master_substream; + struct snd_pcm_substream *slave_substream; +}; + +/* + * ssm2602 register cache + * We can't read the ssm2602 register space when we are + * using 2 wire for device control, so we cache them instead. + * There is no point in caching the reset register + */ +static const u16 ssm2602_reg[SSM2602_CACHEREGNUM] = { + 0x0017, 0x0017, 0x0079, 0x0079, + 0x0000, 0x0000, 0x0000, 0x000a, + 0x0000, 0x0000 +}; + +/* + * read ssm2602 register cache + */ +static inline unsigned int ssm2602_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + if (reg == SSM2602_RESET) + return 0; + if (reg >= SSM2602_CACHEREGNUM) + return -1; + return cache[reg]; +} + +/* + * write ssm2602 register cache + */ +static inline void ssm2602_write_reg_cache(struct snd_soc_codec *codec, + u16 reg, unsigned int value) +{ + u16 *cache = codec->reg_cache; + if (reg >= SSM2602_CACHEREGNUM) + return; + cache[reg] = value; +} + +/* + * write to the ssm2602 register space + */ +static int ssm2602_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 data[2]; + + /* data is + * D15..D9 ssm2602 register offset + * D8...D0 register data + */ + data[0] = (reg << 1) | ((value >> 8) & 0x0001); + data[1] = value & 0x00ff; + + ssm2602_write_reg_cache(codec, reg, value); + if (codec->hw_write(codec->control_data, data, 2) == 2) + return 0; + else + return -EIO; +} + +#define ssm2602_reset(c) ssm2602_write(c, SSM2602_RESET, 0) + +/*Appending several "None"s just for OSS mixer use*/ +static const char *ssm2602_input_select[] = { + "Line", "Mic", "None", "None", "None", + "None", "None", "None", +}; + +static const char *ssm2602_deemph[] = {"None", "32Khz", "44.1Khz", "48Khz"}; + +static const struct soc_enum ssm2602_enum[] = { + SOC_ENUM_SINGLE(SSM2602_APANA, 2, 2, ssm2602_input_select), + SOC_ENUM_SINGLE(SSM2602_APDIGI, 1, 4, ssm2602_deemph), +}; + +static const struct snd_kcontrol_new ssm2602_snd_controls[] = { + +SOC_DOUBLE_R("Master Playback Volume", SSM2602_LOUT1V, SSM2602_ROUT1V, + 0, 127, 0), +SOC_DOUBLE_R("Master Playback ZC Switch", SSM2602_LOUT1V, SSM2602_ROUT1V, + 7, 1, 0), + +SOC_DOUBLE_R("Capture Volume", SSM2602_LINVOL, SSM2602_RINVOL, 0, 31, 0), +SOC_DOUBLE_R("Capture Switch", SSM2602_LINVOL, SSM2602_RINVOL, 7, 1, 1), + +SOC_SINGLE("Mic Boost (+20dB)", SSM2602_APANA, 0, 1, 0), +SOC_SINGLE("Mic Switch", SSM2602_APANA, 1, 1, 1), + +SOC_SINGLE("Sidetone Playback Volume", SSM2602_APANA, 6, 3, 1), + +SOC_SINGLE("ADC High Pass Filter Switch", SSM2602_APDIGI, 0, 1, 1), +SOC_SINGLE("Store DC Offset Switch", SSM2602_APDIGI, 4, 1, 0), + +SOC_ENUM("Capture Source", ssm2602_enum[0]), + +SOC_ENUM("Playback De-emphasis", ssm2602_enum[1]), +}; + +/* add non dapm controls */ +static int ssm2602_add_controls(struct snd_soc_codec *codec) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(ssm2602_snd_controls); i++) { + err = snd_ctl_add(codec->card, + snd_soc_cnew(&ssm2602_snd_controls[i], codec, NULL)); + if (err < 0) + return err; + } + + return 0; +} + +/* Output Mixer */ +static const struct snd_kcontrol_new ssm2602_output_mixer_controls[] = { +SOC_DAPM_SINGLE("Line Bypass Switch", SSM2602_APANA, 3, 1, 0), +SOC_DAPM_SINGLE("Mic Sidetone Switch", SSM2602_APANA, 5, 1, 0), +SOC_DAPM_SINGLE("HiFi Playback Switch", SSM2602_APANA, 4, 1, 0), +}; + +/* Input mux */ +static const struct snd_kcontrol_new ssm2602_input_mux_controls = +SOC_DAPM_ENUM("Input Select", ssm2602_enum[0]); + +static const struct snd_soc_dapm_widget ssm2602_dapm_widgets[] = { +SND_SOC_DAPM_MIXER("Output Mixer", SSM2602_PWR, 4, 1, + &ssm2602_output_mixer_controls[0], + ARRAY_SIZE(ssm2602_output_mixer_controls)), +SND_SOC_DAPM_DAC("DAC", "HiFi Playback", SSM2602_PWR, 3, 1), +SND_SOC_DAPM_OUTPUT("LOUT"), +SND_SOC_DAPM_OUTPUT("LHPOUT"), +SND_SOC_DAPM_OUTPUT("ROUT"), +SND_SOC_DAPM_OUTPUT("RHPOUT"), +SND_SOC_DAPM_ADC("ADC", "HiFi Capture", SSM2602_PWR, 2, 1), +SND_SOC_DAPM_MUX("Input Mux", SND_SOC_NOPM, 0, 0, &ssm2602_input_mux_controls), +SND_SOC_DAPM_PGA("Line Input", SSM2602_PWR, 0, 1, NULL, 0), +SND_SOC_DAPM_MICBIAS("Mic Bias", SSM2602_PWR, 1, 1), +SND_SOC_DAPM_INPUT("MICIN"), +SND_SOC_DAPM_INPUT("RLINEIN"), +SND_SOC_DAPM_INPUT("LLINEIN"), +}; + +static const struct snd_soc_dapm_route audio_conn[] = { + /* output mixer */ + {"Output Mixer", "Line Bypass Switch", "Line Input"}, + {"Output Mixer", "HiFi Playback Switch", "DAC"}, + {"Output Mixer", "Mic Sidetone Switch", "Mic Bias"}, + + /* outputs */ + {"RHPOUT", NULL, "Output Mixer"}, + {"ROUT", NULL, "Output Mixer"}, + {"LHPOUT", NULL, "Output Mixer"}, + {"LOUT", NULL, "Output Mixer"}, + + /* input mux */ + {"Input Mux", "Line", "Line Input"}, + {"Input Mux", "Mic", "Mic Bias"}, + {"ADC", NULL, "Input Mux"}, + + /* inputs */ + {"Line Input", NULL, "LLINEIN"}, + {"Line Input", NULL, "RLINEIN"}, + {"Mic Bias", NULL, "MICIN"}, +}; + +static int ssm2602_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, ssm2602_dapm_widgets, + ARRAY_SIZE(ssm2602_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_conn, ARRAY_SIZE(audio_conn)); + + snd_soc_dapm_new_widgets(codec); + return 0; +} + +struct _coeff_div { + u32 mclk; + u32 rate; + u16 fs; + u8 sr:4; + u8 bosr:1; + u8 usb:1; +}; + +/* codec mclk clock divider coefficients */ +static const struct _coeff_div coeff_div[] = { + /* 48k */ + {12288000, 48000, 256, 0x0, 0x0, 0x0}, + {18432000, 48000, 384, 0x0, 0x1, 0x0}, + {12000000, 48000, 250, 0x0, 0x0, 0x1}, + + /* 32k */ + {12288000, 32000, 384, 0x6, 0x0, 0x0}, + {18432000, 32000, 576, 0x6, 0x1, 0x0}, + {12000000, 32000, 375, 0x6, 0x0, 0x1}, + + /* 8k */ + {12288000, 8000, 1536, 0x3, 0x0, 0x0}, + {18432000, 8000, 2304, 0x3, 0x1, 0x0}, + {11289600, 8000, 1408, 0xb, 0x0, 0x0}, + {16934400, 8000, 2112, 0xb, 0x1, 0x0}, + {12000000, 8000, 1500, 0x3, 0x0, 0x1}, + + /* 96k */ + {12288000, 96000, 128, 0x7, 0x0, 0x0}, + {18432000, 96000, 192, 0x7, 0x1, 0x0}, + {12000000, 96000, 125, 0x7, 0x0, 0x1}, + + /* 44.1k */ + {11289600, 44100, 256, 0x8, 0x0, 0x0}, + {16934400, 44100, 384, 0x8, 0x1, 0x0}, + {12000000, 44100, 272, 0x8, 0x1, 0x1}, + + /* 88.2k */ + {11289600, 88200, 128, 0xf, 0x0, 0x0}, + {16934400, 88200, 192, 0xf, 0x1, 0x0}, + {12000000, 88200, 136, 0xf, 0x1, 0x1}, +}; + +static inline int get_coeff(int mclk, int rate) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(coeff_div); i++) { + if (coeff_div[i].rate == rate && coeff_div[i].mclk == mclk) + return i; + } + return i; +} + +static int ssm2602_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + u16 srate; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + struct ssm2602_priv *ssm2602 = codec->private_data; + u16 iface = ssm2602_read_reg_cache(codec, SSM2602_IFACE) & 0xfff3; + int i = get_coeff(ssm2602->sysclk, params_rate(params)); + + /*no match is found*/ + if (i == ARRAY_SIZE(coeff_div)) + return -EINVAL; + + srate = (coeff_div[i].sr << 2) | + (coeff_div[i].bosr << 1) | coeff_div[i].usb; + + ssm2602_write(codec, SSM2602_ACTIVE, 0); + ssm2602_write(codec, SSM2602_SRATE, srate); + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface |= 0x0004; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface |= 0x0008; + break; + case SNDRV_PCM_FORMAT_S32_LE: + iface |= 0x000c; + break; + } + ssm2602_write(codec, SSM2602_IFACE, iface); + ssm2602_write(codec, SSM2602_ACTIVE, ACTIVE_ACTIVATE_CODEC); + return 0; +} + +static int ssm2602_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + struct ssm2602_priv *ssm2602 = codec->private_data; + struct snd_pcm_runtime *master_runtime; + + /* The DAI has shared clocks so if we already have a playback or + * capture going then constrain this substream to match it. + */ + if (ssm2602->master_substream) { + master_runtime = ssm2602->master_substream->runtime; + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, + master_runtime->rate, + master_runtime->rate); + + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_SAMPLE_BITS, + master_runtime->sample_bits, + master_runtime->sample_bits); + + ssm2602->slave_substream = substream; + } else + ssm2602->master_substream = substream; + + return 0; +} + +static int ssm2602_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + /* set active */ + ssm2602_write(codec, SSM2602_ACTIVE, ACTIVE_ACTIVATE_CODEC); + + return 0; +} + +static void ssm2602_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + /* deactivate */ + if (!codec->active) + ssm2602_write(codec, SSM2602_ACTIVE, 0); +} + +static int ssm2602_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + u16 mute_reg = ssm2602_read_reg_cache(codec, SSM2602_APDIGI) & ~APDIGI_ENABLE_DAC_MUTE; + if (mute) + ssm2602_write(codec, SSM2602_APDIGI, + mute_reg | APDIGI_ENABLE_DAC_MUTE); + else + ssm2602_write(codec, SSM2602_APDIGI, mute_reg); + return 0; +} + +static int ssm2602_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct ssm2602_priv *ssm2602 = codec->private_data; + switch (freq) { + case 11289600: + case 12000000: + case 12288000: + case 16934400: + case 18432000: + ssm2602->sysclk = freq; + return 0; + } + return -EINVAL; +} + +static int ssm2602_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 iface = 0; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + iface |= 0x0040; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= 0x0002; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + iface |= 0x0001; + break; + case SND_SOC_DAIFMT_DSP_A: + iface |= 0x0003; + break; + case SND_SOC_DAIFMT_DSP_B: + iface |= 0x0013; + break; + default: + return -EINVAL; + } + + /* clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + iface |= 0x0090; + break; + case SND_SOC_DAIFMT_IB_NF: + iface |= 0x0080; + break; + case SND_SOC_DAIFMT_NB_IF: + iface |= 0x0010; + break; + default: + return -EINVAL; + } + + /* set iface */ + ssm2602_write(codec, SSM2602_IFACE, iface); + return 0; +} + +static int ssm2602_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + u16 reg = ssm2602_read_reg_cache(codec, SSM2602_PWR) & 0xff7f; + + switch (level) { + case SND_SOC_BIAS_ON: + /* vref/mid, osc on, dac unmute */ + ssm2602_write(codec, SSM2602_PWR, reg); + break; + case SND_SOC_BIAS_PREPARE: + break; + case SND_SOC_BIAS_STANDBY: + /* everything off except vref/vmid, */ + ssm2602_write(codec, SSM2602_PWR, reg | PWR_CLK_OUT_PDN); + break; + case SND_SOC_BIAS_OFF: + /* everything off, dac mute, inactive */ + ssm2602_write(codec, SSM2602_ACTIVE, 0); + ssm2602_write(codec, SSM2602_PWR, 0xffff); + break; + + } + codec->bias_level = level; + return 0; +} + +#define SSM2602_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\ + SNDRV_PCM_RATE_96000) + +struct snd_soc_dai ssm2602_dai = { + .name = "SSM2602", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SSM2602_RATES, + .formats = SNDRV_PCM_FMTBIT_S32_LE,}, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SSM2602_RATES, + .formats = SNDRV_PCM_FMTBIT_S32_LE,}, + .ops = { + .startup = ssm2602_startup, + .prepare = ssm2602_pcm_prepare, + .hw_params = ssm2602_hw_params, + .shutdown = ssm2602_shutdown, + }, + .dai_ops = { + .digital_mute = ssm2602_mute, + .set_sysclk = ssm2602_set_dai_sysclk, + .set_fmt = ssm2602_set_dai_fmt, + } +}; +EXPORT_SYMBOL_GPL(ssm2602_dai); + +static int ssm2602_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + ssm2602_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static int ssm2602_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + int i; + u8 data[2]; + u16 *cache = codec->reg_cache; + + /* Sync reg_cache with the hardware */ + for (i = 0; i < ARRAY_SIZE(ssm2602_reg); i++) { + data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001); + data[1] = cache[i] & 0x00ff; + codec->hw_write(codec->control_data, data, 2); + } + ssm2602_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + ssm2602_set_bias_level(codec, codec->suspend_bias_level); + return 0; +} + +/* + * initialise the ssm2602 driver + * register the mixer and dsp interfaces with the kernel + */ +static int ssm2602_init(struct snd_soc_device *socdev) +{ + struct snd_soc_codec *codec = socdev->codec; + int reg, ret = 0; + + codec->name = "SSM2602"; + codec->owner = THIS_MODULE; + codec->read = ssm2602_read_reg_cache; + codec->write = ssm2602_write; + codec->set_bias_level = ssm2602_set_bias_level; + codec->dai = &ssm2602_dai; + codec->num_dai = 1; + codec->reg_cache_size = sizeof(ssm2602_reg); + codec->reg_cache = kmemdup(ssm2602_reg, sizeof(ssm2602_reg), + GFP_KERNEL); + if (codec->reg_cache == NULL) + return -ENOMEM; + + ssm2602_reset(codec); + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + pr_err("ssm2602: failed to create pcms\n"); + goto pcm_err; + } + /*power on device*/ + ssm2602_write(codec, SSM2602_ACTIVE, 0); + /* set the update bits */ + reg = ssm2602_read_reg_cache(codec, SSM2602_LINVOL); + ssm2602_write(codec, SSM2602_LINVOL, reg | LINVOL_LRIN_BOTH); + reg = ssm2602_read_reg_cache(codec, SSM2602_RINVOL); + ssm2602_write(codec, SSM2602_RINVOL, reg | RINVOL_RLIN_BOTH); + reg = ssm2602_read_reg_cache(codec, SSM2602_LOUT1V); + ssm2602_write(codec, SSM2602_LOUT1V, reg | LOUT1V_LRHP_BOTH); + reg = ssm2602_read_reg_cache(codec, SSM2602_ROUT1V); + ssm2602_write(codec, SSM2602_ROUT1V, reg | ROUT1V_RLHP_BOTH); + /*select Line in as default input*/ + ssm2602_write(codec, SSM2602_APANA, + APANA_ENABLE_MIC_BOOST2 | APANA_SELECT_DAC | + APANA_ENABLE_MIC_BOOST); + ssm2602_write(codec, SSM2602_PWR, 0); + + ssm2602_add_controls(codec); + ssm2602_add_widgets(codec); + ret = snd_soc_register_card(socdev); + if (ret < 0) { + pr_err("ssm2602: failed to register card\n"); + goto card_err; + } + + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + kfree(codec->reg_cache); + return ret; +} + +static struct snd_soc_device *ssm2602_socdev; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) +/* + * ssm2602 2 wire address is determined by GPIO5 + * state during powerup. + * low = 0x1a + * high = 0x1b + */ +static int ssm2602_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct snd_soc_device *socdev = ssm2602_socdev; + struct snd_soc_codec *codec = socdev->codec; + int ret; + + i2c_set_clientdata(i2c, codec); + codec->control_data = i2c; + + ret = ssm2602_init(socdev); + if (ret < 0) + pr_err("failed to initialise SSM2602\n"); + + return ret; +} + +static int ssm2602_i2c_remove(struct i2c_client *client) +{ + struct snd_soc_codec *codec = i2c_get_clientdata(client); + kfree(codec->reg_cache); + return 0; +} + +static const struct i2c_device_id ssm2602_i2c_id[] = { + { "ssm2602", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ssm2602_i2c_id); +/* corgi i2c codec control layer */ +static struct i2c_driver ssm2602_i2c_driver = { + .driver = { + .name = "SSM2602 I2C Codec", + .owner = THIS_MODULE, + }, + .probe = ssm2602_i2c_probe, + .remove = ssm2602_i2c_remove, + .id_table = ssm2602_i2c_id, +}; + +static int ssm2602_add_i2c_device(struct platform_device *pdev, + const struct ssm2602_setup_data *setup) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + int ret; + + ret = i2c_add_driver(&ssm2602_i2c_driver); + if (ret != 0) { + dev_err(&pdev->dev, "can't add i2c driver\n"); + return ret; + } + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = setup->i2c_address; + strlcpy(info.type, "ssm2602", I2C_NAME_SIZE); + adapter = i2c_get_adapter(setup->i2c_bus); + if (!adapter) { + dev_err(&pdev->dev, "can't get i2c adapter %d\n", + setup->i2c_bus); + goto err_driver; + } + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + goto err_driver; + } + return 0; +err_driver: + i2c_del_driver(&ssm2602_i2c_driver); + return -ENODEV; +} +#endif + +static int ssm2602_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct ssm2602_setup_data *setup; + struct snd_soc_codec *codec; + struct ssm2602_priv *ssm2602; + int ret = 0; + + pr_info("ssm2602 Audio Codec %s", SSM2602_VERSION); + + setup = socdev->codec_data; + codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (codec == NULL) + return -ENOMEM; + + ssm2602 = kzalloc(sizeof(struct ssm2602_priv), GFP_KERNEL); + if (ssm2602 == NULL) { + kfree(codec); + return -ENOMEM; + } + + codec->private_data = ssm2602; + socdev->codec = codec; + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + ssm2602_socdev = socdev; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + if (setup->i2c_address) { + codec->hw_write = (hw_write_t)i2c_master_send; + ret = ssm2602_add_i2c_device(pdev, setup); + } +#else + /* other interfaces */ +#endif + return ret; +} + +/* remove everything here */ +static int ssm2602_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + if (codec->control_data) + ssm2602_set_bias_level(codec, SND_SOC_BIAS_OFF); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_unregister_device(codec->control_data); + i2c_del_driver(&ssm2602_i2c_driver); +#endif + kfree(codec->private_data); + kfree(codec); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_ssm2602 = { + .probe = ssm2602_probe, + .remove = ssm2602_remove, + .suspend = ssm2602_suspend, + .resume = ssm2602_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_ssm2602); + +MODULE_DESCRIPTION("ASoC ssm2602 driver"); +MODULE_AUTHOR("Cliff Cai"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/ssm2602.h b/sound/soc/codecs/ssm2602.h new file mode 100644 index 00000000000..f344e6d76e3 --- /dev/null +++ b/sound/soc/codecs/ssm2602.h @@ -0,0 +1,130 @@ +/* + * File: sound/soc/codecs/ssm2602.h + * Author: Cliff Cai <Cliff.Cai@analog.com> + * + * Created: Tue June 06 2008 + * + * Modified: + * Copyright 2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _SSM2602_H +#define _SSM2602_H + +/* SSM2602 Codec Register definitions */ + +#define SSM2602_LINVOL 0x00 +#define SSM2602_RINVOL 0x01 +#define SSM2602_LOUT1V 0x02 +#define SSM2602_ROUT1V 0x03 +#define SSM2602_APANA 0x04 +#define SSM2602_APDIGI 0x05 +#define SSM2602_PWR 0x06 +#define SSM2602_IFACE 0x07 +#define SSM2602_SRATE 0x08 +#define SSM2602_ACTIVE 0x09 +#define SSM2602_RESET 0x0f + +/*SSM2602 Codec Register Field definitions + *(Mask value to extract the corresponding Register field) + */ + +/*Left ADC Volume Control (SSM2602_REG_LEFT_ADC_VOL)*/ +#define LINVOL_LIN_VOL 0x01F /* Left Channel PGA Volume control */ +#define LINVOL_LIN_ENABLE_MUTE 0x080 /* Left Channel Input Mute */ +#define LINVOL_LRIN_BOTH 0x100 /* Left Channel Line Input Volume update */ + +/*Right ADC Volume Control (SSM2602_REG_RIGHT_ADC_VOL)*/ +#define RINVOL_RIN_VOL 0x01F /* Right Channel PGA Volume control */ +#define RINVOL_RIN_ENABLE_MUTE 0x080 /* Right Channel Input Mute */ +#define RINVOL_RLIN_BOTH 0x100 /* Right Channel Line Input Volume update */ + +/*Left DAC Volume Control (SSM2602_REG_LEFT_DAC_VOL)*/ +#define LOUT1V_LHP_VOL 0x07F /* Left Channel Headphone volume control */ +#define LOUT1V_ENABLE_LZC 0x080 /* Left Channel Zero cross detect enable */ +#define LOUT1V_LRHP_BOTH 0x100 /* Left Channel Headphone volume update */ + +/*Right DAC Volume Control (SSM2602_REG_RIGHT_DAC_VOL)*/ +#define ROUT1V_RHP_VOL 0x07F /* Right Channel Headphone volume control */ +#define ROUT1V_ENABLE_RZC 0x080 /* Right Channel Zero cross detect enable */ +#define ROUT1V_RLHP_BOTH 0x100 /* Right Channel Headphone volume update */ + +/*Analogue Audio Path Control (SSM2602_REG_ANALOGUE_PATH)*/ +#define APANA_ENABLE_MIC_BOOST 0x001 /* Primary Microphone Amplifier gain booster control */ +#define APANA_ENABLE_MIC_MUTE 0x002 /* Microphone Mute Control */ +#define APANA_ADC_IN_SELECT 0x004 /* Microphone/Line IN select to ADC (1=MIC, 0=Line In) */ +#define APANA_ENABLE_BYPASS 0x008 /* Line input bypass to line output */ +#define APANA_SELECT_DAC 0x010 /* Select DAC (1=Select DAC, 0=Don't Select DAC) */ +#define APANA_ENABLE_SIDETONE 0x020 /* Enable/Disable Side Tone */ +#define APANA_SIDETONE_ATTN 0x0C0 /* Side Tone Attenuation */ +#define APANA_ENABLE_MIC_BOOST2 0x100 /* Secondary Microphone Amplifier gain booster control */ + +/*Digital Audio Path Control (SSM2602_REG_DIGITAL_PATH)*/ +#define APDIGI_ENABLE_ADC_HPF 0x001 /* Enable/Disable ADC Highpass Filter */ +#define APDIGI_DE_EMPHASIS 0x006 /* De-Emphasis Control */ +#define APDIGI_ENABLE_DAC_MUTE 0x008 /* DAC Mute Control */ +#define APDIGI_STORE_OFFSET 0x010 /* Store/Clear DC offset when HPF is disabled */ + +/*Power Down Control (SSM2602_REG_POWER) + *(1=Enable PowerDown, 0=Disable PowerDown) + */ +#define PWR_LINE_IN_PDN 0x001 /* Line Input Power Down */ +#define PWR_MIC_PDN 0x002 /* Microphone Input & Bias Power Down */ +#define PWR_ADC_PDN 0x004 /* ADC Power Down */ +#define PWR_DAC_PDN 0x008 /* DAC Power Down */ +#define PWR_OUT_PDN 0x010 /* Outputs Power Down */ +#define PWR_OSC_PDN 0x020 /* Oscillator Power Down */ +#define PWR_CLK_OUT_PDN 0x040 /* CLKOUT Power Down */ +#define PWR_POWER_OFF 0x080 /* POWEROFF Mode */ + +/*Digital Audio Interface Format (SSM2602_REG_DIGITAL_IFACE)*/ +#define IFACE_IFACE_FORMAT 0x003 /* Digital Audio input format control */ +#define IFACE_AUDIO_DATA_LEN 0x00C /* Audio Data word length control */ +#define IFACE_DAC_LR_POLARITY 0x010 /* Polarity Control for clocks in RJ,LJ and I2S modes */ +#define IFACE_DAC_LR_SWAP 0x020 /* Swap DAC data control */ +#define IFACE_ENABLE_MASTER 0x040 /* Enable/Disable Master Mode */ +#define IFACE_BCLK_INVERT 0x080 /* Bit Clock Inversion control */ + +/*Sampling Control (SSM2602_REG_SAMPLING_CTRL)*/ +#define SRATE_ENABLE_USB_MODE 0x001 /* Enable/Disable USB Mode */ +#define SRATE_BOS_RATE 0x002 /* Base Over-Sampling rate */ +#define SRATE_SAMPLE_RATE 0x03C /* Clock setting condition (Sampling rate control) */ +#define SRATE_CORECLK_DIV2 0x040 /* Core Clock divider select */ +#define SRATE_CLKOUT_DIV2 0x080 /* Clock Out divider select */ + +/*Active Control (SSM2602_REG_ACTIVE_CTRL)*/ +#define ACTIVE_ACTIVATE_CODEC 0x001 /* Activate Codec Digital Audio Interface */ + +/*********************************************************************/ + +#define SSM2602_CACHEREGNUM 10 + +#define SSM2602_SYSCLK 0 +#define SSM2602_DAI 0 + +struct ssm2602_setup_data { + int i2c_bus; + unsigned short i2c_address; +}; + +extern struct snd_soc_dai ssm2602_dai; +extern struct snd_soc_codec_device soc_codec_dev_ssm2602; + +#endif diff --git a/sound/soc/codecs/tlv320aic26.c b/sound/soc/codecs/tlv320aic26.c new file mode 100644 index 00000000000..bed8a9e63dd --- /dev/null +++ b/sound/soc/codecs/tlv320aic26.c @@ -0,0 +1,520 @@ +/* + * Texas Instruments TLV320AIC26 low power audio CODEC + * ALSA SoC CODEC driver + * + * Copyright (C) 2008 Secret Lab Technologies Ltd. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/device.h> +#include <linux/sysfs.h> +#include <linux/spi/spi.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/soc-of-simple.h> +#include <sound/initval.h> + +#include "tlv320aic26.h" + +MODULE_DESCRIPTION("ASoC TLV320AIC26 codec driver"); +MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); +MODULE_LICENSE("GPL"); + +/* AIC26 driver private data */ +struct aic26 { + struct spi_device *spi; + struct snd_soc_codec codec; + u16 reg_cache[AIC26_NUM_REGS]; /* shadow registers */ + int master; + int datfm; + int mclk; + + /* Keyclick parameters */ + int keyclick_amplitude; + int keyclick_freq; + int keyclick_len; +}; + +/* --------------------------------------------------------------------- + * Register access routines + */ +static unsigned int aic26_reg_read(struct snd_soc_codec *codec, + unsigned int reg) +{ + struct aic26 *aic26 = codec->private_data; + u16 *cache = codec->reg_cache; + u16 cmd, value; + u8 buffer[2]; + int rc; + + if (reg >= AIC26_NUM_REGS) { + WARN_ON_ONCE(1); + return 0; + } + + /* Do SPI transfer; first 16bits are command; remaining is + * register contents */ + cmd = AIC26_READ_COMMAND_WORD(reg); + buffer[0] = (cmd >> 8) & 0xff; + buffer[1] = cmd & 0xff; + rc = spi_write_then_read(aic26->spi, buffer, 2, buffer, 2); + if (rc) { + dev_err(&aic26->spi->dev, "AIC26 reg read error\n"); + return -EIO; + } + value = (buffer[0] << 8) | buffer[1]; + + /* Update the cache before returning with the value */ + cache[reg] = value; + return value; +} + +static unsigned int aic26_reg_read_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + + if (reg >= AIC26_NUM_REGS) { + WARN_ON_ONCE(1); + return 0; + } + + return cache[reg]; +} + +static int aic26_reg_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + struct aic26 *aic26 = codec->private_data; + u16 *cache = codec->reg_cache; + u16 cmd; + u8 buffer[4]; + int rc; + + if (reg >= AIC26_NUM_REGS) { + WARN_ON_ONCE(1); + return -EINVAL; + } + + /* Do SPI transfer; first 16bits are command; remaining is data + * to write into register */ + cmd = AIC26_WRITE_COMMAND_WORD(reg); + buffer[0] = (cmd >> 8) & 0xff; + buffer[1] = cmd & 0xff; + buffer[2] = value >> 8; + buffer[3] = value; + rc = spi_write(aic26->spi, buffer, 4); + if (rc) { + dev_err(&aic26->spi->dev, "AIC26 reg read error\n"); + return -EIO; + } + + /* update cache before returning */ + cache[reg] = value; + return 0; +} + +/* --------------------------------------------------------------------- + * Digital Audio Interface Operations + */ +static int aic26_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + struct aic26 *aic26 = codec->private_data; + int fsref, divisor, wlen, pval, jval, dval, qval; + u16 reg; + + dev_dbg(&aic26->spi->dev, "aic26_hw_params(substream=%p, params=%p)\n", + substream, params); + dev_dbg(&aic26->spi->dev, "rate=%i format=%i\n", params_rate(params), + params_format(params)); + + switch (params_rate(params)) { + case 8000: fsref = 48000; divisor = AIC26_DIV_6; break; + case 11025: fsref = 44100; divisor = AIC26_DIV_4; break; + case 12000: fsref = 48000; divisor = AIC26_DIV_4; break; + case 16000: fsref = 48000; divisor = AIC26_DIV_3; break; + case 22050: fsref = 44100; divisor = AIC26_DIV_2; break; + case 24000: fsref = 48000; divisor = AIC26_DIV_2; break; + case 32000: fsref = 48000; divisor = AIC26_DIV_1_5; break; + case 44100: fsref = 44100; divisor = AIC26_DIV_1; break; + case 48000: fsref = 48000; divisor = AIC26_DIV_1; break; + default: + dev_dbg(&aic26->spi->dev, "bad rate\n"); return -EINVAL; + } + + /* select data word length */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: wlen = AIC26_WLEN_16; break; + case SNDRV_PCM_FORMAT_S16_BE: wlen = AIC26_WLEN_16; break; + case SNDRV_PCM_FORMAT_S24_BE: wlen = AIC26_WLEN_24; break; + case SNDRV_PCM_FORMAT_S32_BE: wlen = AIC26_WLEN_32; break; + default: + dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL; + } + + /* Configure PLL */ + pval = 1; + jval = (fsref == 44100) ? 7 : 8; + dval = (fsref == 44100) ? 5264 : 1920; + qval = 0; + reg = 0x8000 | qval << 11 | pval << 8 | jval << 2; + aic26_reg_write(codec, AIC26_REG_PLL_PROG1, reg); + reg = dval << 2; + aic26_reg_write(codec, AIC26_REG_PLL_PROG2, reg); + + /* Audio Control 3 (master mode, fsref rate) */ + reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL3); + reg &= ~0xf800; + if (aic26->master) + reg |= 0x0800; + if (fsref == 48000) + reg |= 0x2000; + aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg); + + /* Audio Control 1 (FSref divisor) */ + reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL1); + reg &= ~0x0fff; + reg |= wlen | aic26->datfm | (divisor << 3) | divisor; + aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL1, reg); + + return 0; +} + +/** + * aic26_mute - Mute control to reduce noise when changing audio format + */ +static int aic26_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + struct aic26 *aic26 = codec->private_data; + u16 reg = aic26_reg_read_cache(codec, AIC26_REG_DAC_GAIN); + + dev_dbg(&aic26->spi->dev, "aic26_mute(dai=%p, mute=%i)\n", + dai, mute); + + if (mute) + reg |= 0x8080; + else + reg &= ~0x8080; + aic26_reg_write(codec, AIC26_REG_DAC_GAIN, reg); + + return 0; +} + +static int aic26_set_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct aic26 *aic26 = codec->private_data; + + dev_dbg(&aic26->spi->dev, "aic26_set_sysclk(dai=%p, clk_id==%i," + " freq=%i, dir=%i)\n", + codec_dai, clk_id, freq, dir); + + /* MCLK needs to fall between 2MHz and 50 MHz */ + if ((freq < 2000000) || (freq > 50000000)) + return -EINVAL; + + aic26->mclk = freq; + return 0; +} + +static int aic26_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct aic26 *aic26 = codec->private_data; + + dev_dbg(&aic26->spi->dev, "aic26_set_fmt(dai=%p, fmt==%i)\n", + codec_dai, fmt); + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: aic26->master = 1; break; + case SND_SOC_DAIFMT_CBS_CFS: aic26->master = 0; break; + default: + dev_dbg(&aic26->spi->dev, "bad master\n"); return -EINVAL; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: aic26->datfm = AIC26_DATFM_I2S; break; + case SND_SOC_DAIFMT_DSP_A: aic26->datfm = AIC26_DATFM_DSP; break; + case SND_SOC_DAIFMT_RIGHT_J: aic26->datfm = AIC26_DATFM_RIGHTJ; break; + case SND_SOC_DAIFMT_LEFT_J: aic26->datfm = AIC26_DATFM_LEFTJ; break; + default: + dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL; + } + + return 0; +} + +/* --------------------------------------------------------------------- + * Digital Audio Interface Definition + */ +#define AIC26_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ + SNDRV_PCM_RATE_48000) +#define AIC26_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |\ + SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE) + +struct snd_soc_dai aic26_dai = { + .name = "tlv320aic26", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = AIC26_RATES, + .formats = AIC26_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = AIC26_RATES, + .formats = AIC26_FORMATS, + }, + .ops = { + .hw_params = aic26_hw_params, + }, + .dai_ops = { + .digital_mute = aic26_mute, + .set_sysclk = aic26_set_sysclk, + .set_fmt = aic26_set_fmt, + }, +}; +EXPORT_SYMBOL_GPL(aic26_dai); + +/* --------------------------------------------------------------------- + * ALSA controls + */ +static const char *aic26_capture_src_text[] = {"Mic", "Aux"}; +static const struct soc_enum aic26_capture_src_enum = + SOC_ENUM_SINGLE(AIC26_REG_AUDIO_CTRL1, 12, 2, aic26_capture_src_text); + +static const struct snd_kcontrol_new aic26_snd_controls[] = { + /* Output */ + SOC_DOUBLE("PCM Playback Volume", AIC26_REG_DAC_GAIN, 8, 0, 0x7f, 1), + SOC_DOUBLE("PCM Playback Switch", AIC26_REG_DAC_GAIN, 15, 7, 1, 1), + SOC_SINGLE("PCM Capture Volume", AIC26_REG_ADC_GAIN, 8, 0x7f, 0), + SOC_SINGLE("PCM Capture Mute", AIC26_REG_ADC_GAIN, 15, 1, 1), + SOC_SINGLE("Keyclick activate", AIC26_REG_AUDIO_CTRL2, 15, 0x1, 0), + SOC_SINGLE("Keyclick amplitude", AIC26_REG_AUDIO_CTRL2, 12, 0x7, 0), + SOC_SINGLE("Keyclick frequency", AIC26_REG_AUDIO_CTRL2, 8, 0x7, 0), + SOC_SINGLE("Keyclick period", AIC26_REG_AUDIO_CTRL2, 4, 0xf, 0), + SOC_ENUM("Capture Source", aic26_capture_src_enum), +}; + +/* --------------------------------------------------------------------- + * SoC CODEC portion of driver: probe and release routines + */ +static int aic26_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + struct snd_kcontrol *kcontrol; + struct aic26 *aic26; + int i, ret, err; + + dev_info(&pdev->dev, "Probing AIC26 SoC CODEC driver\n"); + dev_dbg(&pdev->dev, "socdev=%p\n", socdev); + dev_dbg(&pdev->dev, "codec_data=%p\n", socdev->codec_data); + + /* Fetch the relevant aic26 private data here (it's already been + * stored in the .codec pointer) */ + aic26 = socdev->codec_data; + if (aic26 == NULL) { + dev_err(&pdev->dev, "aic26: missing codec pointer\n"); + return -ENODEV; + } + codec = &aic26->codec; + socdev->codec = codec; + + dev_dbg(&pdev->dev, "Registering PCMs, dev=%p, socdev->dev=%p\n", + &pdev->dev, socdev->dev); + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(&pdev->dev, "aic26: failed to create pcms\n"); + return -ENODEV; + } + + /* register controls */ + dev_dbg(&pdev->dev, "Registering controls\n"); + for (i = 0; i < ARRAY_SIZE(aic26_snd_controls); i++) { + kcontrol = snd_soc_cnew(&aic26_snd_controls[i], codec, NULL); + err = snd_ctl_add(codec->card, kcontrol); + WARN_ON(err < 0); + } + + /* CODEC is setup, we can register the card now */ + dev_dbg(&pdev->dev, "Registering card\n"); + ret = snd_soc_register_card(socdev); + if (ret < 0) { + dev_err(&pdev->dev, "aic26: failed to register card\n"); + goto card_err; + } + return 0; + + card_err: + snd_soc_free_pcms(socdev); + return ret; +} + +static int aic26_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + snd_soc_free_pcms(socdev); + return 0; +} + +struct snd_soc_codec_device aic26_soc_codec_dev = { + .probe = aic26_probe, + .remove = aic26_remove, +}; +EXPORT_SYMBOL_GPL(aic26_soc_codec_dev); + +/* --------------------------------------------------------------------- + * SPI device portion of driver: sysfs files for debugging + */ + +static ssize_t aic26_keyclick_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct aic26 *aic26 = dev_get_drvdata(dev); + int val, amp, freq, len; + + val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2); + amp = (val >> 12) & 0x7; + freq = (125 << ((val >> 8) & 0x7)) >> 1; + len = 2 * (1 + ((val >> 4) & 0xf)); + + return sprintf(buf, "amp=%x freq=%iHz len=%iclks\n", amp, freq, len); +} + +/* Any write to the keyclick attribute will trigger the keyclick event */ +static ssize_t aic26_keyclick_set(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct aic26 *aic26 = dev_get_drvdata(dev); + int val; + + val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2); + val |= 0x8000; + aic26_reg_write(&aic26->codec, AIC26_REG_AUDIO_CTRL2, val); + + return count; +} + +static DEVICE_ATTR(keyclick, 0644, aic26_keyclick_show, aic26_keyclick_set); + +/* --------------------------------------------------------------------- + * SPI device portion of driver: probe and release routines and SPI + * driver registration. + */ +static int aic26_spi_probe(struct spi_device *spi) +{ + struct aic26 *aic26; + int rc, i, reg; + + dev_dbg(&spi->dev, "probing tlv320aic26 spi device\n"); + + /* Allocate driver data */ + aic26 = kzalloc(sizeof *aic26, GFP_KERNEL); + if (!aic26) + return -ENOMEM; + + /* Initialize the driver data */ + aic26->spi = spi; + dev_set_drvdata(&spi->dev, aic26); + + /* Setup what we can in the codec structure so that the register + * access functions will work as expected. More will be filled + * out when it is probed by the SoC CODEC part of this driver */ + aic26->codec.private_data = aic26; + aic26->codec.name = "aic26"; + aic26->codec.owner = THIS_MODULE; + aic26->codec.dai = &aic26_dai; + aic26->codec.num_dai = 1; + aic26->codec.read = aic26_reg_read; + aic26->codec.write = aic26_reg_write; + aic26->master = 1; + mutex_init(&aic26->codec.mutex); + INIT_LIST_HEAD(&aic26->codec.dapm_widgets); + INIT_LIST_HEAD(&aic26->codec.dapm_paths); + aic26->codec.reg_cache_size = AIC26_NUM_REGS; + aic26->codec.reg_cache = aic26->reg_cache; + + /* Reset the codec to power on defaults */ + aic26_reg_write(&aic26->codec, AIC26_REG_RESET, 0xBB00); + + /* Power up CODEC */ + aic26_reg_write(&aic26->codec, AIC26_REG_POWER_CTRL, 0); + + /* Audio Control 3 (master mode, fsref rate) */ + reg = aic26_reg_read(&aic26->codec, AIC26_REG_AUDIO_CTRL3); + reg &= ~0xf800; + reg |= 0x0800; /* set master mode */ + aic26_reg_write(&aic26->codec, AIC26_REG_AUDIO_CTRL3, reg); + + /* Fill register cache */ + for (i = 0; i < ARRAY_SIZE(aic26->reg_cache); i++) + aic26_reg_read(&aic26->codec, i); + + /* Register the sysfs files for debugging */ + /* Create SysFS files */ + rc = device_create_file(&spi->dev, &dev_attr_keyclick); + if (rc) + dev_info(&spi->dev, "error creating sysfs files\n"); + +#if defined(CONFIG_SND_SOC_OF_SIMPLE) + /* Tell the of_soc helper about this codec */ + of_snd_soc_register_codec(&aic26_soc_codec_dev, aic26, &aic26_dai, + spi->dev.archdata.of_node); +#endif + + dev_dbg(&spi->dev, "SPI device initialized\n"); + return 0; +} + +static int aic26_spi_remove(struct spi_device *spi) +{ + struct aic26 *aic26 = dev_get_drvdata(&spi->dev); + + kfree(aic26); + + return 0; +} + +static struct spi_driver aic26_spi = { + .driver = { + .name = "tlv320aic26", + .owner = THIS_MODULE, + }, + .probe = aic26_spi_probe, + .remove = aic26_spi_remove, +}; + +static int __init aic26_init(void) +{ + return spi_register_driver(&aic26_spi); +} +module_init(aic26_init); + +static void __exit aic26_exit(void) +{ + spi_unregister_driver(&aic26_spi); +} +module_exit(aic26_exit); diff --git a/sound/soc/codecs/tlv320aic26.h b/sound/soc/codecs/tlv320aic26.h new file mode 100644 index 00000000000..786ba16c945 --- /dev/null +++ b/sound/soc/codecs/tlv320aic26.h @@ -0,0 +1,96 @@ +/* + * Texas Instruments TLV320AIC26 low power audio CODEC + * register definitions + * + * Copyright (C) 2008 Secret Lab Technologies Ltd. + */ + +#ifndef _TLV320AIC16_H_ +#define _TLV320AIC16_H_ + +/* AIC26 Registers */ +#define AIC26_READ_COMMAND_WORD(addr) ((1 << 15) | (addr << 5)) +#define AIC26_WRITE_COMMAND_WORD(addr) ((0 << 15) | (addr << 5)) +#define AIC26_PAGE_ADDR(page, offset) ((page << 6) | offset) +#define AIC26_NUM_REGS AIC26_PAGE_ADDR(3, 0) + +/* Page 0: Auxillary data registers */ +#define AIC26_REG_BAT1 AIC26_PAGE_ADDR(0, 0x05) +#define AIC26_REG_BAT2 AIC26_PAGE_ADDR(0, 0x06) +#define AIC26_REG_AUX AIC26_PAGE_ADDR(0, 0x07) +#define AIC26_REG_TEMP1 AIC26_PAGE_ADDR(0, 0x09) +#define AIC26_REG_TEMP2 AIC26_PAGE_ADDR(0, 0x0A) + +/* Page 1: Auxillary control registers */ +#define AIC26_REG_AUX_ADC AIC26_PAGE_ADDR(1, 0x00) +#define AIC26_REG_STATUS AIC26_PAGE_ADDR(1, 0x01) +#define AIC26_REG_REFERENCE AIC26_PAGE_ADDR(1, 0x03) +#define AIC26_REG_RESET AIC26_PAGE_ADDR(1, 0x04) + +/* Page 2: Audio control registers */ +#define AIC26_REG_AUDIO_CTRL1 AIC26_PAGE_ADDR(2, 0x00) +#define AIC26_REG_ADC_GAIN AIC26_PAGE_ADDR(2, 0x01) +#define AIC26_REG_DAC_GAIN AIC26_PAGE_ADDR(2, 0x02) +#define AIC26_REG_SIDETONE AIC26_PAGE_ADDR(2, 0x03) +#define AIC26_REG_AUDIO_CTRL2 AIC26_PAGE_ADDR(2, 0x04) +#define AIC26_REG_POWER_CTRL AIC26_PAGE_ADDR(2, 0x05) +#define AIC26_REG_AUDIO_CTRL3 AIC26_PAGE_ADDR(2, 0x06) + +#define AIC26_REG_FILTER_COEFF_L_N0 AIC26_PAGE_ADDR(2, 0x07) +#define AIC26_REG_FILTER_COEFF_L_N1 AIC26_PAGE_ADDR(2, 0x08) +#define AIC26_REG_FILTER_COEFF_L_N2 AIC26_PAGE_ADDR(2, 0x09) +#define AIC26_REG_FILTER_COEFF_L_N3 AIC26_PAGE_ADDR(2, 0x0A) +#define AIC26_REG_FILTER_COEFF_L_N4 AIC26_PAGE_ADDR(2, 0x0B) +#define AIC26_REG_FILTER_COEFF_L_N5 AIC26_PAGE_ADDR(2, 0x0C) +#define AIC26_REG_FILTER_COEFF_L_D1 AIC26_PAGE_ADDR(2, 0x0D) +#define AIC26_REG_FILTER_COEFF_L_D2 AIC26_PAGE_ADDR(2, 0x0E) +#define AIC26_REG_FILTER_COEFF_L_D4 AIC26_PAGE_ADDR(2, 0x0F) +#define AIC26_REG_FILTER_COEFF_L_D5 AIC26_PAGE_ADDR(2, 0x10) +#define AIC26_REG_FILTER_COEFF_R_N0 AIC26_PAGE_ADDR(2, 0x11) +#define AIC26_REG_FILTER_COEFF_R_N1 AIC26_PAGE_ADDR(2, 0x12) +#define AIC26_REG_FILTER_COEFF_R_N2 AIC26_PAGE_ADDR(2, 0x13) +#define AIC26_REG_FILTER_COEFF_R_N3 AIC26_PAGE_ADDR(2, 0x14) +#define AIC26_REG_FILTER_COEFF_R_N4 AIC26_PAGE_ADDR(2, 0x15) +#define AIC26_REG_FILTER_COEFF_R_N5 AIC26_PAGE_ADDR(2, 0x16) +#define AIC26_REG_FILTER_COEFF_R_D1 AIC26_PAGE_ADDR(2, 0x17) +#define AIC26_REG_FILTER_COEFF_R_D2 AIC26_PAGE_ADDR(2, 0x18) +#define AIC26_REG_FILTER_COEFF_R_D4 AIC26_PAGE_ADDR(2, 0x19) +#define AIC26_REG_FILTER_COEFF_R_D5 AIC26_PAGE_ADDR(2, 0x1A) + +#define AIC26_REG_PLL_PROG1 AIC26_PAGE_ADDR(2, 0x1B) +#define AIC26_REG_PLL_PROG2 AIC26_PAGE_ADDR(2, 0x1C) +#define AIC26_REG_AUDIO_CTRL4 AIC26_PAGE_ADDR(2, 0x1D) +#define AIC26_REG_AUDIO_CTRL5 AIC26_PAGE_ADDR(2, 0x1E) + +/* fsref dividers; used in register 'Audio Control 1' */ +enum aic26_divisors { + AIC26_DIV_1 = 0, + AIC26_DIV_1_5 = 1, + AIC26_DIV_2 = 2, + AIC26_DIV_3 = 3, + AIC26_DIV_4 = 4, + AIC26_DIV_5 = 5, + AIC26_DIV_5_5 = 6, + AIC26_DIV_6 = 7, +}; + +/* Digital data format */ +enum aic26_datfm { + AIC26_DATFM_I2S = 0 << 8, + AIC26_DATFM_DSP = 1 << 8, + AIC26_DATFM_RIGHTJ = 2 << 8, /* right justified */ + AIC26_DATFM_LEFTJ = 3 << 8, /* left justified */ +}; + +/* Sample word length in bits; used in register 'Audio Control 1' */ +enum aic26_wlen { + AIC26_WLEN_16 = 0 << 10, + AIC26_WLEN_20 = 1 << 10, + AIC26_WLEN_24 = 2 << 10, + AIC26_WLEN_32 = 3 << 10, +}; + +extern struct snd_soc_dai aic26_dai; +extern struct snd_soc_codec_device aic26_soc_codec_dev; + +#endif /* _TLV320AIC16_H_ */ diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index b1dce5f459d..566a427c928 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1,7 +1,7 @@ /* * ALSA SoC TLV320AIC3X codec driver * - * Author: Vladimir Barinov, <vbarinov@ru.mvista.com> + * Author: Vladimir Barinov, <vbarinov@embeddedalley.com> * Copyright: (C) 2007 MontaVista Software, Inc., <source@mvista.com> * * Based on sound/soc/codecs/wm8753.c by Liam Girdwood @@ -1172,73 +1172,39 @@ static struct snd_soc_device *aic3x_socdev; * AIC3X 2 wire address can be up to 4 devices with device addresses * 0x18, 0x19, 0x1A, 0x1B */ -static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; - -/* Magic definition of all other variables and things */ -I2C_CLIENT_INSMOD; - -static struct i2c_driver aic3x_i2c_driver; -static struct i2c_client client_template; /* * If the i2c layer weren't so broken, we could pass this kind of data * around */ -static int aic3x_codec_probe(struct i2c_adapter *adap, int addr, int kind) +static int aic3x_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) { struct snd_soc_device *socdev = aic3x_socdev; - struct aic3x_setup_data *setup = socdev->codec_data; struct snd_soc_codec *codec = socdev->codec; - struct i2c_client *i2c; int ret; - if (addr != setup->i2c_address) - return -ENODEV; - - client_template.adapter = adap; - client_template.addr = addr; - - i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); - return -ENOMEM; - } i2c_set_clientdata(i2c, codec); codec->control_data = i2c; - ret = i2c_attach_client(i2c); - if (ret < 0) { - printk(KERN_ERR "aic3x: failed to attach codec at addr %x\n", - addr); - goto err; - } - ret = aic3x_init(socdev); - if (ret < 0) { + if (ret < 0) printk(KERN_ERR "aic3x: failed to initialise AIC3X\n"); - goto err; - } - return ret; - -err: - kfree(codec); - kfree(i2c); return ret; } -static int aic3x_i2c_detach(struct i2c_client *client) +static int aic3x_i2c_remove(struct i2c_client *client) { struct snd_soc_codec *codec = i2c_get_clientdata(client); - i2c_detach_client(client); kfree(codec->reg_cache); - kfree(client); return 0; } -static int aic3x_i2c_attach(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, aic3x_codec_probe); -} +static const struct i2c_device_id aic3x_i2c_id[] = { + { "tlv320aic3x", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, aic3x_i2c_id); /* machine i2c codec control layer */ static struct i2c_driver aic3x_i2c_driver = { @@ -1246,13 +1212,9 @@ static struct i2c_driver aic3x_i2c_driver = { .name = "aic3x I2C Codec", .owner = THIS_MODULE, }, - .attach_adapter = aic3x_i2c_attach, - .detach_client = aic3x_i2c_detach, -}; - -static struct i2c_client client_template = { - .name = "AIC3X", - .driver = &aic3x_i2c_driver, + .probe = aic3x_i2c_probe, + .remove = aic3x_i2c_remove, + .id_table = aic3x_i2c_id, }; static int aic3x_i2c_read(struct i2c_client *client, u8 *value, int len) @@ -1260,6 +1222,46 @@ static int aic3x_i2c_read(struct i2c_client *client, u8 *value, int len) value[0] = i2c_smbus_read_byte_data(client, value[0]); return (len == 1); } + +static int aic3x_add_i2c_device(struct platform_device *pdev, + const struct aic3x_setup_data *setup) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + int ret; + + ret = i2c_add_driver(&aic3x_i2c_driver); + if (ret != 0) { + dev_err(&pdev->dev, "can't add i2c driver\n"); + return ret; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = setup->i2c_address; + strlcpy(info.type, "tlv320aic3x", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(setup->i2c_bus); + if (!adapter) { + dev_err(&pdev->dev, "can't get i2c adapter %d\n", + setup->i2c_bus); + goto err_driver; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + goto err_driver; + } + + return 0; + +err_driver: + i2c_del_driver(&aic3x_i2c_driver); + return -ENODEV; +} #endif static int aic3x_probe(struct platform_device *pdev) @@ -1292,16 +1294,18 @@ static int aic3x_probe(struct platform_device *pdev) aic3x_socdev = socdev; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) if (setup->i2c_address) { - normal_i2c[0] = setup->i2c_address; codec->hw_write = (hw_write_t) i2c_master_send; codec->hw_read = (hw_read_t) aic3x_i2c_read; - ret = i2c_add_driver(&aic3x_i2c_driver); - if (ret != 0) - printk(KERN_ERR "can't add i2c driver"); + ret = aic3x_add_i2c_device(pdev, setup); } #else /* Add other interfaces here */ #endif + + if (ret != 0) { + kfree(codec->private_data); + kfree(codec); + } return ret; } @@ -1317,6 +1321,7 @@ static int aic3x_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_unregister_device(codec->control_data); i2c_del_driver(&aic3x_i2c_driver); #endif kfree(codec->private_data); diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h index d76c079b86e..00a195aa02e 100644 --- a/sound/soc/codecs/tlv320aic3x.h +++ b/sound/soc/codecs/tlv320aic3x.h @@ -1,7 +1,7 @@ /* * ALSA SoC TLV320AIC3X codec driver * - * Author: Vladimir Barinov, <vbarinov@ru.mvista.com> + * Author: Vladimir Barinov, <vbarinov@embeddedalley.com> * Copyright: (C) 2007 MontaVista Software, Inc., <source@mvista.com> * * This program is free software; you can redistribute it and/or modify @@ -224,6 +224,7 @@ int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio); int aic3x_headset_detected(struct snd_soc_codec *codec); struct aic3x_setup_data { + int i2c_bus; unsigned short i2c_address; unsigned int gpio_func[2]; }; diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index a52d6d9e007..d206d7f892b 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -701,89 +701,86 @@ static struct snd_soc_device *uda1380_socdev; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) -#define I2C_DRIVERID_UDA1380 0xfefe /* liam - need a proper id */ - -static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; - -/* Magic definition of all other variables and things */ -I2C_CLIENT_INSMOD; - -static struct i2c_driver uda1380_i2c_driver; -static struct i2c_client client_template; - -/* If the i2c layer weren't so broken, we could pass this kind of data - around */ - -static int uda1380_codec_probe(struct i2c_adapter *adap, int addr, int kind) +static int uda1380_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) { struct snd_soc_device *socdev = uda1380_socdev; struct uda1380_setup_data *setup = socdev->codec_data; struct snd_soc_codec *codec = socdev->codec; - struct i2c_client *i2c; int ret; - if (addr != setup->i2c_address) - return -ENODEV; - - client_template.adapter = adap; - client_template.addr = addr; - - i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); - return -ENOMEM; - } i2c_set_clientdata(i2c, codec); codec->control_data = i2c; - ret = i2c_attach_client(i2c); - if (ret < 0) { - pr_err("uda1380: failed to attach codec at addr %x\n", addr); - goto err; - } - ret = uda1380_init(socdev, setup->dac_clk); - if (ret < 0) { + if (ret < 0) pr_err("uda1380: failed to initialise UDA1380\n"); - goto err; - } - return ret; -err: - kfree(codec); - kfree(i2c); return ret; } -static int uda1380_i2c_detach(struct i2c_client *client) +static int uda1380_i2c_remove(struct i2c_client *client) { struct snd_soc_codec *codec = i2c_get_clientdata(client); - i2c_detach_client(client); kfree(codec->reg_cache); - kfree(client); return 0; } -static int uda1380_i2c_attach(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, uda1380_codec_probe); -} +static const struct i2c_device_id uda1380_i2c_id[] = { + { "uda1380", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, uda1380_i2c_id); static struct i2c_driver uda1380_i2c_driver = { .driver = { .name = "UDA1380 I2C Codec", .owner = THIS_MODULE, }, - .id = I2C_DRIVERID_UDA1380, - .attach_adapter = uda1380_i2c_attach, - .detach_client = uda1380_i2c_detach, - .command = NULL, + .probe = uda1380_i2c_probe, + .remove = uda1380_i2c_remove, + .id_table = uda1380_i2c_id, }; -static struct i2c_client client_template = { - .name = "UDA1380", - .driver = &uda1380_i2c_driver, -}; +static int uda1380_add_i2c_device(struct platform_device *pdev, + const struct uda1380_setup_data *setup) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + int ret; + + ret = i2c_add_driver(&uda1380_i2c_driver); + if (ret != 0) { + dev_err(&pdev->dev, "can't add i2c driver\n"); + return ret; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = setup->i2c_address; + strlcpy(info.type, "uda1380", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(setup->i2c_bus); + if (!adapter) { + dev_err(&pdev->dev, "can't get i2c adapter %d\n", + setup->i2c_bus); + goto err_driver; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + goto err_driver; + } + + return 0; + +err_driver: + i2c_del_driver(&uda1380_i2c_driver); + return -ENODEV; +} #endif static int uda1380_probe(struct platform_device *pdev) @@ -791,7 +788,7 @@ static int uda1380_probe(struct platform_device *pdev) struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct uda1380_setup_data *setup; struct snd_soc_codec *codec; - int ret = 0; + int ret; pr_info("UDA1380 Audio Codec %s", UDA1380_VERSION); @@ -806,17 +803,17 @@ static int uda1380_probe(struct platform_device *pdev) INIT_LIST_HEAD(&codec->dapm_paths); uda1380_socdev = socdev; + ret = -ENODEV; + #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) if (setup->i2c_address) { - normal_i2c[0] = setup->i2c_address; codec->hw_write = (hw_write_t)i2c_master_send; - ret = i2c_add_driver(&uda1380_i2c_driver); - if (ret != 0) - printk(KERN_ERR "can't add i2c driver"); + ret = uda1380_add_i2c_device(pdev, setup); } -#else - /* Add other interfaces here */ #endif + + if (ret != 0) + kfree(codec); return ret; } @@ -832,6 +829,7 @@ static int uda1380_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_unregister_device(codec->control_data); i2c_del_driver(&uda1380_i2c_driver); #endif kfree(codec); diff --git a/sound/soc/codecs/uda1380.h b/sound/soc/codecs/uda1380.h index 50c603e2c9f..c55c17a52a1 100644 --- a/sound/soc/codecs/uda1380.h +++ b/sound/soc/codecs/uda1380.h @@ -73,6 +73,7 @@ #define R23_AGC_EN 0x0001 struct uda1380_setup_data { + int i2c_bus; unsigned short i2c_address; int dac_clk; #define UDA1380_DAC_CLK_SYSCLK 0 diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c index 67325fd9544..9a37c8d95ed 100644 --- a/sound/soc/codecs/wm8510.c +++ b/sound/soc/codecs/wm8510.c @@ -199,7 +199,7 @@ SOC_DAPM_SINGLE("PCM Playback Switch", WM8510_MONOMIX, 0, 1, 0), }; static const struct snd_kcontrol_new wm8510_boost_controls[] = { -SOC_DAPM_SINGLE("Mic PGA Switch", WM8510_INPPGA, 6, 1, 0), +SOC_DAPM_SINGLE("Mic PGA Switch", WM8510_INPPGA, 6, 1, 1), SOC_DAPM_SINGLE("Aux Volume", WM8510_ADCBOOST, 0, 7, 0), SOC_DAPM_SINGLE("Mic Volume", WM8510_ADCBOOST, 4, 7, 0), }; @@ -665,90 +665,86 @@ static struct snd_soc_device *wm8510_socdev; /* * WM8510 2 wire address is 0x1a */ -#define I2C_DRIVERID_WM8510 0xfefe /* liam - need a proper id */ -static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; - -/* Magic definition of all other variables and things */ -I2C_CLIENT_INSMOD; - -static struct i2c_driver wm8510_i2c_driver; -static struct i2c_client client_template; - -/* If the i2c layer weren't so broken, we could pass this kind of data - around */ - -static int wm8510_codec_probe(struct i2c_adapter *adap, int addr, int kind) +static int wm8510_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8510_socdev; - struct wm8510_setup_data *setup = socdev->codec_data; struct snd_soc_codec *codec = socdev->codec; - struct i2c_client *i2c; int ret; - if (addr != setup->i2c_address) - return -ENODEV; - - client_template.adapter = adap; - client_template.addr = addr; - - i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); - return -ENOMEM; - } i2c_set_clientdata(i2c, codec); codec->control_data = i2c; - ret = i2c_attach_client(i2c); - if (ret < 0) { - pr_err("failed to attach codec at addr %x\n", addr); - goto err; - } - ret = wm8510_init(socdev); - if (ret < 0) { + if (ret < 0) pr_err("failed to initialise WM8510\n"); - goto err; - } - return ret; -err: - kfree(codec); - kfree(i2c); return ret; } -static int wm8510_i2c_detach(struct i2c_client *client) +static int wm8510_i2c_remove(struct i2c_client *client) { struct snd_soc_codec *codec = i2c_get_clientdata(client); - i2c_detach_client(client); kfree(codec->reg_cache); - kfree(client); return 0; } -static int wm8510_i2c_attach(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, wm8510_codec_probe); -} +static const struct i2c_device_id wm8510_i2c_id[] = { + { "wm8510", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8510_i2c_id); -/* corgi i2c codec control layer */ static struct i2c_driver wm8510_i2c_driver = { .driver = { .name = "WM8510 I2C Codec", .owner = THIS_MODULE, }, - .id = I2C_DRIVERID_WM8510, - .attach_adapter = wm8510_i2c_attach, - .detach_client = wm8510_i2c_detach, - .command = NULL, + .probe = wm8510_i2c_probe, + .remove = wm8510_i2c_remove, + .id_table = wm8510_i2c_id, }; -static struct i2c_client client_template = { - .name = "WM8510", - .driver = &wm8510_i2c_driver, -}; +static int wm8510_add_i2c_device(struct platform_device *pdev, + const struct wm8510_setup_data *setup) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + int ret; + + ret = i2c_add_driver(&wm8510_i2c_driver); + if (ret != 0) { + dev_err(&pdev->dev, "can't add i2c driver\n"); + return ret; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = setup->i2c_address; + strlcpy(info.type, "wm8510", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(setup->i2c_bus); + if (!adapter) { + dev_err(&pdev->dev, "can't get i2c adapter %d\n", + setup->i2c_bus); + goto err_driver; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + goto err_driver; + } + + return 0; + +err_driver: + i2c_del_driver(&wm8510_i2c_driver); + return -ENODEV; +} #endif static int wm8510_probe(struct platform_device *pdev) @@ -773,15 +769,15 @@ static int wm8510_probe(struct platform_device *pdev) wm8510_socdev = socdev; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) if (setup->i2c_address) { - normal_i2c[0] = setup->i2c_address; codec->hw_write = (hw_write_t)i2c_master_send; - ret = i2c_add_driver(&wm8510_i2c_driver); - if (ret != 0) - printk(KERN_ERR "can't add i2c driver"); + ret = wm8510_add_i2c_device(pdev, setup); } #else /* Add other interfaces here */ #endif + + if (ret != 0) + kfree(codec); return ret; } @@ -797,6 +793,7 @@ static int wm8510_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_unregister_device(codec->control_data); i2c_del_driver(&wm8510_i2c_driver); #endif kfree(codec); diff --git a/sound/soc/codecs/wm8510.h b/sound/soc/codecs/wm8510.h index f5d2e42eb3f..c5368396045 100644 --- a/sound/soc/codecs/wm8510.h +++ b/sound/soc/codecs/wm8510.h @@ -94,6 +94,7 @@ #define WM8510_MCLKDIV_12 (7 << 5) struct wm8510_setup_data { + int i2c_bus; unsigned short i2c_address; }; diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c new file mode 100644 index 00000000000..df1ffbe305b --- /dev/null +++ b/sound/soc/codecs/wm8580.c @@ -0,0 +1,1055 @@ +/* + * wm8580.c -- WM8580 ALSA Soc Audio driver + * + * Copyright 2008 Wolfson Microelectronics PLC. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Notes: + * The WM8580 is a multichannel codec with S/PDIF support, featuring six + * DAC channels and two ADC channels. + * + * Currently only the primary audio interface is supported - S/PDIF and + * the secondary audio interfaces are not. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/tlv.h> +#include <sound/initval.h> +#include <asm/div64.h> + +#include "wm8580.h" + +#define AUDIO_NAME "wm8580" +#define WM8580_VERSION "0.1" + +struct pll_state { + unsigned int in; + unsigned int out; +}; + +/* codec private data */ +struct wm8580_priv { + struct pll_state a; + struct pll_state b; +}; + +/* WM8580 register space */ +#define WM8580_PLLA1 0x00 +#define WM8580_PLLA2 0x01 +#define WM8580_PLLA3 0x02 +#define WM8580_PLLA4 0x03 +#define WM8580_PLLB1 0x04 +#define WM8580_PLLB2 0x05 +#define WM8580_PLLB3 0x06 +#define WM8580_PLLB4 0x07 +#define WM8580_CLKSEL 0x08 +#define WM8580_PAIF1 0x09 +#define WM8580_PAIF2 0x0A +#define WM8580_SAIF1 0x0B +#define WM8580_PAIF3 0x0C +#define WM8580_PAIF4 0x0D +#define WM8580_SAIF2 0x0E +#define WM8580_DAC_CONTROL1 0x0F +#define WM8580_DAC_CONTROL2 0x10 +#define WM8580_DAC_CONTROL3 0x11 +#define WM8580_DAC_CONTROL4 0x12 +#define WM8580_DAC_CONTROL5 0x13 +#define WM8580_DIGITAL_ATTENUATION_DACL1 0x14 +#define WM8580_DIGITAL_ATTENUATION_DACR1 0x15 +#define WM8580_DIGITAL_ATTENUATION_DACL2 0x16 +#define WM8580_DIGITAL_ATTENUATION_DACR2 0x17 +#define WM8580_DIGITAL_ATTENUATION_DACL3 0x18 +#define WM8580_DIGITAL_ATTENUATION_DACR3 0x19 +#define WM8580_MASTER_DIGITAL_ATTENUATION 0x1C +#define WM8580_ADC_CONTROL1 0x1D +#define WM8580_SPDTXCHAN0 0x1E +#define WM8580_SPDTXCHAN1 0x1F +#define WM8580_SPDTXCHAN2 0x20 +#define WM8580_SPDTXCHAN3 0x21 +#define WM8580_SPDTXCHAN4 0x22 +#define WM8580_SPDTXCHAN5 0x23 +#define WM8580_SPDMODE 0x24 +#define WM8580_INTMASK 0x25 +#define WM8580_GPO1 0x26 +#define WM8580_GPO2 0x27 +#define WM8580_GPO3 0x28 +#define WM8580_GPO4 0x29 +#define WM8580_GPO5 0x2A +#define WM8580_INTSTAT 0x2B +#define WM8580_SPDRXCHAN1 0x2C +#define WM8580_SPDRXCHAN2 0x2D +#define WM8580_SPDRXCHAN3 0x2E +#define WM8580_SPDRXCHAN4 0x2F +#define WM8580_SPDRXCHAN5 0x30 +#define WM8580_SPDSTAT 0x31 +#define WM8580_PWRDN1 0x32 +#define WM8580_PWRDN2 0x33 +#define WM8580_READBACK 0x34 +#define WM8580_RESET 0x35 + +/* PLLB4 (register 7h) */ +#define WM8580_PLLB4_MCLKOUTSRC_MASK 0x60 +#define WM8580_PLLB4_MCLKOUTSRC_PLLA 0x20 +#define WM8580_PLLB4_MCLKOUTSRC_PLLB 0x40 +#define WM8580_PLLB4_MCLKOUTSRC_OSC 0x60 + +#define WM8580_PLLB4_CLKOUTSRC_MASK 0x180 +#define WM8580_PLLB4_CLKOUTSRC_PLLACLK 0x080 +#define WM8580_PLLB4_CLKOUTSRC_PLLBCLK 0x100 +#define WM8580_PLLB4_CLKOUTSRC_OSCCLK 0x180 + +/* CLKSEL (register 8h) */ +#define WM8580_CLKSEL_DAC_CLKSEL_MASK 0x03 +#define WM8580_CLKSEL_DAC_CLKSEL_PLLA 0x01 +#define WM8580_CLKSEL_DAC_CLKSEL_PLLB 0x02 + +/* AIF control 1 (registers 9h-bh) */ +#define WM8580_AIF_RATE_MASK 0x7 +#define WM8580_AIF_RATE_128 0x0 +#define WM8580_AIF_RATE_192 0x1 +#define WM8580_AIF_RATE_256 0x2 +#define WM8580_AIF_RATE_384 0x3 +#define WM8580_AIF_RATE_512 0x4 +#define WM8580_AIF_RATE_768 0x5 +#define WM8580_AIF_RATE_1152 0x6 + +#define WM8580_AIF_BCLKSEL_MASK 0x18 +#define WM8580_AIF_BCLKSEL_64 0x00 +#define WM8580_AIF_BCLKSEL_128 0x08 +#define WM8580_AIF_BCLKSEL_256 0x10 +#define WM8580_AIF_BCLKSEL_SYSCLK 0x18 + +#define WM8580_AIF_MS 0x20 + +#define WM8580_AIF_CLKSRC_MASK 0xc0 +#define WM8580_AIF_CLKSRC_PLLA 0x40 +#define WM8580_AIF_CLKSRC_PLLB 0x40 +#define WM8580_AIF_CLKSRC_MCLK 0xc0 + +/* AIF control 2 (registers ch-eh) */ +#define WM8580_AIF_FMT_MASK 0x03 +#define WM8580_AIF_FMT_RIGHTJ 0x00 +#define WM8580_AIF_FMT_LEFTJ 0x01 +#define WM8580_AIF_FMT_I2S 0x02 +#define WM8580_AIF_FMT_DSP 0x03 + +#define WM8580_AIF_LENGTH_MASK 0x0c +#define WM8580_AIF_LENGTH_16 0x00 +#define WM8580_AIF_LENGTH_20 0x04 +#define WM8580_AIF_LENGTH_24 0x08 +#define WM8580_AIF_LENGTH_32 0x0c + +#define WM8580_AIF_LRP 0x10 +#define WM8580_AIF_BCP 0x20 + +/* Powerdown Register 1 (register 32h) */ +#define WM8580_PWRDN1_PWDN 0x001 +#define WM8580_PWRDN1_ALLDACPD 0x040 + +/* Powerdown Register 2 (register 33h) */ +#define WM8580_PWRDN2_OSSCPD 0x001 +#define WM8580_PWRDN2_PLLAPD 0x002 +#define WM8580_PWRDN2_PLLBPD 0x004 +#define WM8580_PWRDN2_SPDIFPD 0x008 +#define WM8580_PWRDN2_SPDIFTXD 0x010 +#define WM8580_PWRDN2_SPDIFRXD 0x020 + +#define WM8580_DAC_CONTROL5_MUTEALL 0x10 + +/* + * wm8580 register cache + * We can't read the WM8580 register space when we + * are using 2 wire for device control, so we cache them instead. + */ +static const u16 wm8580_reg[] = { + 0x0121, 0x017e, 0x007d, 0x0014, /*R3*/ + 0x0121, 0x017e, 0x007d, 0x0194, /*R7*/ + 0x001c, 0x0002, 0x0002, 0x00c2, /*R11*/ + 0x0182, 0x0082, 0x000a, 0x0024, /*R15*/ + 0x0009, 0x0000, 0x00ff, 0x0000, /*R19*/ + 0x00ff, 0x00ff, 0x00ff, 0x00ff, /*R23*/ + 0x00ff, 0x00ff, 0x00ff, 0x00ff, /*R27*/ + 0x01f0, 0x0040, 0x0000, 0x0000, /*R31(0x1F)*/ + 0x0000, 0x0000, 0x0031, 0x000b, /*R35*/ + 0x0039, 0x0000, 0x0010, 0x0032, /*R39*/ + 0x0054, 0x0076, 0x0098, 0x0000, /*R43(0x2B)*/ + 0x0000, 0x0000, 0x0000, 0x0000, /*R47*/ + 0x0000, 0x0000, 0x005e, 0x003e, /*R51(0x33)*/ + 0x0000, 0x0000 /*R53*/ +}; + +/* + * read wm8580 register cache + */ +static inline unsigned int wm8580_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + BUG_ON(reg > ARRAY_SIZE(wm8580_reg)); + return cache[reg]; +} + +/* + * write wm8580 register cache + */ +static inline void wm8580_write_reg_cache(struct snd_soc_codec *codec, + unsigned int reg, unsigned int value) +{ + u16 *cache = codec->reg_cache; + + cache[reg] = value; +} + +/* + * write to the WM8580 register space + */ +static int wm8580_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 data[2]; + + BUG_ON(reg > ARRAY_SIZE(wm8580_reg)); + + /* Registers are 9 bits wide */ + value &= 0x1ff; + + switch (reg) { + case WM8580_RESET: + /* Uncached */ + break; + default: + if (value == wm8580_read_reg_cache(codec, reg)) + return 0; + } + + /* data is + * D15..D9 WM8580 register offset + * D8...D0 register data + */ + data[0] = (reg << 1) | ((value >> 8) & 0x0001); + data[1] = value & 0x00ff; + + wm8580_write_reg_cache(codec, reg, value); + if (codec->hw_write(codec->control_data, data, 2) == 2) + return 0; + else + return -EIO; +} + +static inline unsigned int wm8580_read(struct snd_soc_codec *codec, + unsigned int reg) +{ + switch (reg) { + default: + return wm8580_read_reg_cache(codec, reg); + } +} + +static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1); + +static int wm8580_out_vu(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + int reg = kcontrol->private_value & 0xff; + int reg2 = (kcontrol->private_value >> 24) & 0xff; + int ret; + u16 val; + + /* Clear the register cache so we write without VU set */ + wm8580_write_reg_cache(codec, reg, 0); + wm8580_write_reg_cache(codec, reg2, 0); + + ret = snd_soc_put_volsw_2r(kcontrol, ucontrol); + if (ret < 0) + return ret; + + /* Now write again with the volume update bit set */ + val = wm8580_read_reg_cache(codec, reg); + wm8580_write(codec, reg, val | 0x0100); + + val = wm8580_read_reg_cache(codec, reg2); + wm8580_write(codec, reg2, val | 0x0100); + + return 0; +} + +#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, shift, max, invert, tlv_array) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw_2r, \ + .get = snd_soc_get_volsw_2r, .put = wm8580_out_vu, \ + .private_value = (reg_left) | ((shift) << 8) | \ + ((max) << 12) | ((invert) << 20) | ((reg_right) << 24) } + +static const struct snd_kcontrol_new wm8580_snd_controls[] = { +SOC_WM8580_OUT_DOUBLE_R_TLV("DAC1 Playback Volume", + WM8580_DIGITAL_ATTENUATION_DACL1, + WM8580_DIGITAL_ATTENUATION_DACR1, + 0, 0xff, 0, dac_tlv), +SOC_WM8580_OUT_DOUBLE_R_TLV("DAC2 Playback Volume", + WM8580_DIGITAL_ATTENUATION_DACL2, + WM8580_DIGITAL_ATTENUATION_DACR2, + 0, 0xff, 0, dac_tlv), +SOC_WM8580_OUT_DOUBLE_R_TLV("DAC3 Playback Volume", + WM8580_DIGITAL_ATTENUATION_DACL3, + WM8580_DIGITAL_ATTENUATION_DACR3, + 0, 0xff, 0, dac_tlv), + +SOC_SINGLE("DAC1 Deemphasis Switch", WM8580_DAC_CONTROL3, 0, 1, 0), +SOC_SINGLE("DAC2 Deemphasis Switch", WM8580_DAC_CONTROL3, 1, 1, 0), +SOC_SINGLE("DAC3 Deemphasis Switch", WM8580_DAC_CONTROL3, 2, 1, 0), + +SOC_DOUBLE("DAC1 Invert Switch", WM8580_DAC_CONTROL4, 0, 1, 1, 0), +SOC_DOUBLE("DAC2 Invert Switch", WM8580_DAC_CONTROL4, 2, 3, 1, 0), +SOC_DOUBLE("DAC3 Invert Switch", WM8580_DAC_CONTROL4, 4, 5, 1, 0), + +SOC_SINGLE("DAC ZC Switch", WM8580_DAC_CONTROL5, 5, 1, 0), +SOC_SINGLE("DAC1 Switch", WM8580_DAC_CONTROL5, 0, 1, 0), +SOC_SINGLE("DAC2 Switch", WM8580_DAC_CONTROL5, 1, 1, 0), +SOC_SINGLE("DAC3 Switch", WM8580_DAC_CONTROL5, 2, 1, 0), + +SOC_DOUBLE("ADC Mute Switch", WM8580_ADC_CONTROL1, 0, 1, 1, 0), +SOC_SINGLE("ADC High-Pass Filter Switch", WM8580_ADC_CONTROL1, 4, 1, 0), +}; + +/* Add non-DAPM controls */ +static int wm8580_add_controls(struct snd_soc_codec *codec) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(wm8580_snd_controls); i++) { + err = snd_ctl_add(codec->card, + snd_soc_cnew(&wm8580_snd_controls[i], + codec, NULL)); + if (err < 0) + return err; + } + return 0; +} +static const struct snd_soc_dapm_widget wm8580_dapm_widgets[] = { +SND_SOC_DAPM_DAC("DAC1", "Playback", WM8580_PWRDN1, 2, 1), +SND_SOC_DAPM_DAC("DAC2", "Playback", WM8580_PWRDN1, 3, 1), +SND_SOC_DAPM_DAC("DAC3", "Playback", WM8580_PWRDN1, 4, 1), + +SND_SOC_DAPM_OUTPUT("VOUT1L"), +SND_SOC_DAPM_OUTPUT("VOUT1R"), +SND_SOC_DAPM_OUTPUT("VOUT2L"), +SND_SOC_DAPM_OUTPUT("VOUT2R"), +SND_SOC_DAPM_OUTPUT("VOUT3L"), +SND_SOC_DAPM_OUTPUT("VOUT3R"), + +SND_SOC_DAPM_ADC("ADC", "Capture", WM8580_PWRDN1, 1, 1), + +SND_SOC_DAPM_INPUT("AINL"), +SND_SOC_DAPM_INPUT("AINR"), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + { "VOUT1L", NULL, "DAC1" }, + { "VOUT1R", NULL, "DAC1" }, + + { "VOUT2L", NULL, "DAC2" }, + { "VOUT2R", NULL, "DAC2" }, + + { "VOUT3L", NULL, "DAC3" }, + { "VOUT3R", NULL, "DAC3" }, + + { "ADC", NULL, "AINL" }, + { "ADC", NULL, "AINR" }, +}; + +static int wm8580_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets, + ARRAY_SIZE(wm8580_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_new_widgets(codec); + return 0; +} + +/* PLL divisors */ +struct _pll_div { + u32 prescale:1; + u32 postscale:1; + u32 freqmode:2; + u32 n:4; + u32 k:24; +}; + +/* The size in bits of the pll divide */ +#define FIXED_PLL_SIZE (1 << 22) + +/* PLL rate to output rate divisions */ +static struct { + unsigned int div; + unsigned int freqmode; + unsigned int postscale; +} post_table[] = { + { 2, 0, 0 }, + { 4, 0, 1 }, + { 4, 1, 0 }, + { 8, 1, 1 }, + { 8, 2, 0 }, + { 16, 2, 1 }, + { 12, 3, 0 }, + { 24, 3, 1 } +}; + +static int pll_factors(struct _pll_div *pll_div, unsigned int target, + unsigned int source) +{ + u64 Kpart; + unsigned int K, Ndiv, Nmod; + int i; + + pr_debug("wm8580: PLL %dHz->%dHz\n", source, target); + + /* Scale the output frequency up; the PLL should run in the + * region of 90-100MHz. + */ + for (i = 0; i < ARRAY_SIZE(post_table); i++) { + if (target * post_table[i].div >= 90000000 && + target * post_table[i].div <= 100000000) { + pll_div->freqmode = post_table[i].freqmode; + pll_div->postscale = post_table[i].postscale; + target *= post_table[i].div; + break; + } + } + + if (i == ARRAY_SIZE(post_table)) { + printk(KERN_ERR "wm8580: Unable to scale output frequency " + "%u\n", target); + return -EINVAL; + } + + Ndiv = target / source; + + if (Ndiv < 5) { + source /= 2; + pll_div->prescale = 1; + Ndiv = target / source; + } else + pll_div->prescale = 0; + + if ((Ndiv < 5) || (Ndiv > 13)) { + printk(KERN_ERR + "WM8580 N=%d outside supported range\n", Ndiv); + return -EINVAL; + } + + pll_div->n = Ndiv; + Nmod = target % source; + Kpart = FIXED_PLL_SIZE * (long long)Nmod; + + do_div(Kpart, source); + + K = Kpart & 0xFFFFFFFF; + + pll_div->k = K; + + pr_debug("PLL %x.%x prescale %d freqmode %d postscale %d\n", + pll_div->n, pll_div->k, pll_div->prescale, pll_div->freqmode, + pll_div->postscale); + + return 0; +} + +static int wm8580_set_dai_pll(struct snd_soc_dai *codec_dai, + int pll_id, unsigned int freq_in, unsigned int freq_out) +{ + int offset; + struct snd_soc_codec *codec = codec_dai->codec; + struct wm8580_priv *wm8580 = codec->private_data; + struct pll_state *state; + struct _pll_div pll_div; + unsigned int reg; + unsigned int pwr_mask; + int ret; + + /* GCC isn't able to work out the ifs below for initialising/using + * pll_div so suppress warnings. + */ + memset(&pll_div, 0, sizeof(pll_div)); + + switch (pll_id) { + case WM8580_PLLA: + state = &wm8580->a; + offset = 0; + pwr_mask = WM8580_PWRDN2_PLLAPD; + break; + case WM8580_PLLB: + state = &wm8580->b; + offset = 4; + pwr_mask = WM8580_PWRDN2_PLLBPD; + break; + default: + return -ENODEV; + } + + if (freq_in && freq_out) { + ret = pll_factors(&pll_div, freq_out, freq_in); + if (ret != 0) + return ret; + } + + state->in = freq_in; + state->out = freq_out; + + /* Always disable the PLL - it is not safe to leave it running + * while reprogramming it. + */ + reg = wm8580_read(codec, WM8580_PWRDN2); + wm8580_write(codec, WM8580_PWRDN2, reg | pwr_mask); + + if (!freq_in || !freq_out) + return 0; + + wm8580_write(codec, WM8580_PLLA1 + offset, pll_div.k & 0x1ff); + wm8580_write(codec, WM8580_PLLA2 + offset, (pll_div.k >> 9) & 0xff); + wm8580_write(codec, WM8580_PLLA3 + offset, + (pll_div.k >> 18 & 0xf) | (pll_div.n << 4)); + + reg = wm8580_read(codec, WM8580_PLLA4 + offset); + reg &= ~0x3f; + reg |= pll_div.prescale | pll_div.postscale << 1 | + pll_div.freqmode << 4; + + wm8580_write(codec, WM8580_PLLA4 + offset, reg); + + /* All done, turn it on */ + reg = wm8580_read(codec, WM8580_PWRDN2); + wm8580_write(codec, WM8580_PWRDN2, reg & ~pwr_mask); + + return 0; +} + +/* + * Set PCM DAI bit size and sample rate. + */ +static int wm8580_paif_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai_link *dai = rtd->dai; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + u16 paifb = wm8580_read(codec, WM8580_PAIF3 + dai->codec_dai->id); + + paifb &= ~WM8580_AIF_LENGTH_MASK; + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + paifb |= WM8580_AIF_LENGTH_20; + break; + case SNDRV_PCM_FORMAT_S24_LE: + paifb |= WM8580_AIF_LENGTH_24; + break; + case SNDRV_PCM_FORMAT_S32_LE: + paifb |= WM8580_AIF_LENGTH_24; + break; + default: + return -EINVAL; + } + + wm8580_write(codec, WM8580_PAIF3 + dai->codec_dai->id, paifb); + return 0; +} + +static int wm8580_set_paif_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + unsigned int aifa; + unsigned int aifb; + int can_invert_lrclk; + + aifa = wm8580_read(codec, WM8580_PAIF1 + codec_dai->id); + aifb = wm8580_read(codec, WM8580_PAIF3 + codec_dai->id); + + aifb &= ~(WM8580_AIF_FMT_MASK | WM8580_AIF_LRP | WM8580_AIF_BCP); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + aifa &= ~WM8580_AIF_MS; + break; + case SND_SOC_DAIFMT_CBM_CFM: + aifa |= WM8580_AIF_MS; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + can_invert_lrclk = 1; + aifb |= WM8580_AIF_FMT_I2S; + break; + case SND_SOC_DAIFMT_RIGHT_J: + can_invert_lrclk = 1; + aifb |= WM8580_AIF_FMT_RIGHTJ; + break; + case SND_SOC_DAIFMT_LEFT_J: + can_invert_lrclk = 1; + aifb |= WM8580_AIF_FMT_LEFTJ; + break; + case SND_SOC_DAIFMT_DSP_A: + can_invert_lrclk = 0; + aifb |= WM8580_AIF_FMT_DSP; + break; + case SND_SOC_DAIFMT_DSP_B: + can_invert_lrclk = 0; + aifb |= WM8580_AIF_FMT_DSP; + aifb |= WM8580_AIF_LRP; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + + case SND_SOC_DAIFMT_IB_IF: + if (!can_invert_lrclk) + return -EINVAL; + aifb |= WM8580_AIF_BCP; + aifb |= WM8580_AIF_LRP; + break; + + case SND_SOC_DAIFMT_IB_NF: + aifb |= WM8580_AIF_BCP; + break; + + case SND_SOC_DAIFMT_NB_IF: + if (!can_invert_lrclk) + return -EINVAL; + aifb |= WM8580_AIF_LRP; + break; + + default: + return -EINVAL; + } + + wm8580_write(codec, WM8580_PAIF1 + codec_dai->id, aifa); + wm8580_write(codec, WM8580_PAIF3 + codec_dai->id, aifb); + + return 0; +} + +static int wm8580_set_dai_clkdiv(struct snd_soc_dai *codec_dai, + int div_id, int div) +{ + struct snd_soc_codec *codec = codec_dai->codec; + unsigned int reg; + + switch (div_id) { + case WM8580_MCLK: + reg = wm8580_read(codec, WM8580_PLLB4); + reg &= ~WM8580_PLLB4_MCLKOUTSRC_MASK; + + switch (div) { + case WM8580_CLKSRC_MCLK: + /* Input */ + break; + + case WM8580_CLKSRC_PLLA: + reg |= WM8580_PLLB4_MCLKOUTSRC_PLLA; + break; + case WM8580_CLKSRC_PLLB: + reg |= WM8580_PLLB4_MCLKOUTSRC_PLLB; + break; + + case WM8580_CLKSRC_OSC: + reg |= WM8580_PLLB4_MCLKOUTSRC_OSC; + break; + + default: + return -EINVAL; + } + wm8580_write(codec, WM8580_PLLB4, reg); + break; + + case WM8580_DAC_CLKSEL: + reg = wm8580_read(codec, WM8580_CLKSEL); + reg &= ~WM8580_CLKSEL_DAC_CLKSEL_MASK; + + switch (div) { + case WM8580_CLKSRC_MCLK: + break; + + case WM8580_CLKSRC_PLLA: + reg |= WM8580_CLKSEL_DAC_CLKSEL_PLLA; + break; + + case WM8580_CLKSRC_PLLB: + reg |= WM8580_CLKSEL_DAC_CLKSEL_PLLB; + break; + + default: + return -EINVAL; + } + wm8580_write(codec, WM8580_CLKSEL, reg); + break; + + case WM8580_CLKOUTSRC: + reg = wm8580_read(codec, WM8580_PLLB4); + reg &= ~WM8580_PLLB4_CLKOUTSRC_MASK; + + switch (div) { + case WM8580_CLKSRC_NONE: + break; + + case WM8580_CLKSRC_PLLA: + reg |= WM8580_PLLB4_CLKOUTSRC_PLLACLK; + break; + + case WM8580_CLKSRC_PLLB: + reg |= WM8580_PLLB4_CLKOUTSRC_PLLBCLK; + break; + + case WM8580_CLKSRC_OSC: + reg |= WM8580_PLLB4_CLKOUTSRC_OSCCLK; + break; + + default: + return -EINVAL; + } + wm8580_write(codec, WM8580_PLLB4, reg); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int wm8580_digital_mute(struct snd_soc_dai *codec_dai, int mute) +{ + struct snd_soc_codec *codec = codec_dai->codec; + unsigned int reg; + + reg = wm8580_read(codec, WM8580_DAC_CONTROL5); + + if (mute) + reg |= WM8580_DAC_CONTROL5_MUTEALL; + else + reg &= ~WM8580_DAC_CONTROL5_MUTEALL; + + wm8580_write(codec, WM8580_DAC_CONTROL5, reg); + + return 0; +} + +static int wm8580_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + u16 reg; + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + case SND_SOC_BIAS_STANDBY: + break; + case SND_SOC_BIAS_OFF: + reg = wm8580_read(codec, WM8580_PWRDN1); + wm8580_write(codec, WM8580_PWRDN1, reg | WM8580_PWRDN1_PWDN); + break; + } + codec->bias_level = level; + return 0; +} + +#define WM8580_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_dai wm8580_dai[] = { + { + .name = "WM8580 PAIFRX", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 6, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = WM8580_FORMATS, + }, + .ops = { + .hw_params = wm8580_paif_hw_params, + }, + .dai_ops = { + .set_fmt = wm8580_set_paif_dai_fmt, + .set_clkdiv = wm8580_set_dai_clkdiv, + .set_pll = wm8580_set_dai_pll, + .digital_mute = wm8580_digital_mute, + }, + }, + { + .name = "WM8580 PAIFTX", + .id = 1, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = WM8580_FORMATS, + }, + .ops = { + .hw_params = wm8580_paif_hw_params, + }, + .dai_ops = { + .set_fmt = wm8580_set_paif_dai_fmt, + .set_clkdiv = wm8580_set_dai_clkdiv, + .set_pll = wm8580_set_dai_pll, + }, + }, +}; +EXPORT_SYMBOL_GPL(wm8580_dai); + +/* + * initialise the WM8580 driver + * register the mixer and dsp interfaces with the kernel + */ +static int wm8580_init(struct snd_soc_device *socdev) +{ + struct snd_soc_codec *codec = socdev->codec; + int ret = 0; + + codec->name = "WM8580"; + codec->owner = THIS_MODULE; + codec->read = wm8580_read_reg_cache; + codec->write = wm8580_write; + codec->set_bias_level = wm8580_set_bias_level; + codec->dai = wm8580_dai; + codec->num_dai = ARRAY_SIZE(wm8580_dai); + codec->reg_cache_size = ARRAY_SIZE(wm8580_reg); + codec->reg_cache = kmemdup(wm8580_reg, sizeof(wm8580_reg), + GFP_KERNEL); + + if (codec->reg_cache == NULL) + return -ENOMEM; + + /* Get the codec into a known state */ + wm8580_write(codec, WM8580_RESET, 0); + + /* Power up and get individual control of the DACs */ + wm8580_write(codec, WM8580_PWRDN1, wm8580_read(codec, WM8580_PWRDN1) & + ~(WM8580_PWRDN1_PWDN | WM8580_PWRDN1_ALLDACPD)); + + /* Make VMID high impedence */ + wm8580_write(codec, WM8580_ADC_CONTROL1, + wm8580_read(codec, WM8580_ADC_CONTROL1) & ~0x100); + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, + SNDRV_DEFAULT_STR1); + if (ret < 0) { + printk(KERN_ERR "wm8580: failed to create pcms\n"); + goto pcm_err; + } + + wm8580_add_controls(codec); + wm8580_add_widgets(codec); + + ret = snd_soc_register_card(socdev); + if (ret < 0) { + printk(KERN_ERR "wm8580: failed to register card\n"); + goto card_err; + } + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + kfree(codec->reg_cache); + return ret; +} + +/* If the i2c layer weren't so broken, we could pass this kind of data + around */ +static struct snd_soc_device *wm8580_socdev; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + +/* + * WM8580 2 wire address is determined by GPIO5 + * state during powerup. + * low = 0x1a + * high = 0x1b + */ +static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; + +/* Magic definition of all other variables and things */ +I2C_CLIENT_INSMOD; + +static struct i2c_driver wm8580_i2c_driver; +static struct i2c_client client_template; + +static int wm8580_codec_probe(struct i2c_adapter *adap, int addr, int kind) +{ + struct snd_soc_device *socdev = wm8580_socdev; + struct wm8580_setup_data *setup = socdev->codec_data; + struct snd_soc_codec *codec = socdev->codec; + struct i2c_client *i2c; + int ret; + + if (addr != setup->i2c_address) + return -ENODEV; + + client_template.adapter = adap; + client_template.addr = addr; + + i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); + if (i2c == NULL) { + kfree(codec); + return -ENOMEM; + } + i2c_set_clientdata(i2c, codec); + codec->control_data = i2c; + + ret = i2c_attach_client(i2c); + if (ret < 0) { + dev_err(&i2c->dev, "failed to attach codec at addr %x\n", addr); + goto err; + } + + ret = wm8580_init(socdev); + if (ret < 0) { + dev_err(&i2c->dev, "failed to initialise WM8580\n"); + goto err; + } + + return ret; + +err: + kfree(codec); + kfree(i2c); + return ret; +} + +static int wm8580_i2c_detach(struct i2c_client *client) +{ + struct snd_soc_codec *codec = i2c_get_clientdata(client); + i2c_detach_client(client); + kfree(codec->reg_cache); + kfree(client); + return 0; +} + +static int wm8580_i2c_attach(struct i2c_adapter *adap) +{ + return i2c_probe(adap, &addr_data, wm8580_codec_probe); +} + +/* corgi i2c codec control layer */ +static struct i2c_driver wm8580_i2c_driver = { + .driver = { + .name = "WM8580 I2C Codec", + .owner = THIS_MODULE, + }, + .attach_adapter = wm8580_i2c_attach, + .detach_client = wm8580_i2c_detach, + .command = NULL, +}; + +static struct i2c_client client_template = { + .name = "WM8580", + .driver = &wm8580_i2c_driver, +}; +#endif + +static int wm8580_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct wm8580_setup_data *setup; + struct snd_soc_codec *codec; + struct wm8580_priv *wm8580; + int ret = 0; + + pr_info("WM8580 Audio Codec %s\n", WM8580_VERSION); + + setup = socdev->codec_data; + codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (codec == NULL) + return -ENOMEM; + + wm8580 = kzalloc(sizeof(struct wm8580_priv), GFP_KERNEL); + if (wm8580 == NULL) { + kfree(codec); + return -ENOMEM; + } + + codec->private_data = wm8580; + socdev->codec = codec; + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + wm8580_socdev = socdev; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + if (setup->i2c_address) { + normal_i2c[0] = setup->i2c_address; + codec->hw_write = (hw_write_t)i2c_master_send; + ret = i2c_add_driver(&wm8580_i2c_driver); + if (ret != 0) + printk(KERN_ERR "can't add i2c driver"); + } +#else + /* Add other interfaces here */ +#endif + return ret; +} + +/* power down chip */ +static int wm8580_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + if (codec->control_data) + wm8580_set_bias_level(codec, SND_SOC_BIAS_OFF); + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&wm8580_i2c_driver); +#endif + kfree(codec->private_data); + kfree(codec); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm8580 = { + .probe = wm8580_probe, + .remove = wm8580_remove, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm8580); + +MODULE_DESCRIPTION("ASoC WM8580 driver"); +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8580.h b/sound/soc/codecs/wm8580.h new file mode 100644 index 00000000000..589ddaba21d --- /dev/null +++ b/sound/soc/codecs/wm8580.h @@ -0,0 +1,42 @@ +/* + * wm8580.h -- audio driver for WM8580 + * + * Copyright 2008 Samsung Electronics. + * Author: Ryu Euiyoul + * ryu.real@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef _WM8580_H +#define _WM8580_H + +#define WM8580_PLLA 1 +#define WM8580_PLLB 2 + +#define WM8580_MCLK 1 +#define WM8580_DAC_CLKSEL 2 +#define WM8580_CLKOUTSRC 3 + +#define WM8580_CLKSRC_MCLK 1 +#define WM8580_CLKSRC_PLLA 2 +#define WM8580_CLKSRC_PLLB 3 +#define WM8580_CLKSRC_OSC 4 +#define WM8580_CLKSRC_NONE 5 + +struct wm8580_setup_data { + unsigned short i2c_address; +}; + +#define WM8580_DAI_PAIFRX 0 +#define WM8580_DAI_PAIFTX 1 + +extern struct snd_soc_dai wm8580_dai[]; +extern struct snd_soc_codec_device soc_codec_dev_wm8580; + +#endif + diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 369d39c3f74..7b64d9a7ff7 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -19,6 +19,7 @@ #include <linux/pm.h> #include <linux/i2c.h> #include <linux/platform_device.h> +#include <linux/spi/spi.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -570,90 +571,144 @@ static struct snd_soc_device *wm8731_socdev; * low = 0x1a * high = 0x1b */ -static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; -/* Magic definition of all other variables and things */ -I2C_CLIENT_INSMOD; - -static struct i2c_driver wm8731_i2c_driver; -static struct i2c_client client_template; - -/* If the i2c layer weren't so broken, we could pass this kind of data - around */ - -static int wm8731_codec_probe(struct i2c_adapter *adap, int addr, int kind) +static int wm8731_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8731_socdev; - struct wm8731_setup_data *setup = socdev->codec_data; struct snd_soc_codec *codec = socdev->codec; - struct i2c_client *i2c; int ret; - if (addr != setup->i2c_address) - return -ENODEV; - - client_template.adapter = adap; - client_template.addr = addr; - - i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); - return -ENOMEM; - } i2c_set_clientdata(i2c, codec); codec->control_data = i2c; - ret = i2c_attach_client(i2c); - if (ret < 0) { - pr_err("failed to attach codec at addr %x\n", addr); - goto err; - } - ret = wm8731_init(socdev); - if (ret < 0) { + if (ret < 0) pr_err("failed to initialise WM8731\n"); - goto err; - } - return ret; -err: - kfree(codec); - kfree(i2c); return ret; } -static int wm8731_i2c_detach(struct i2c_client *client) +static int wm8731_i2c_remove(struct i2c_client *client) { struct snd_soc_codec *codec = i2c_get_clientdata(client); - i2c_detach_client(client); kfree(codec->reg_cache); - kfree(client); return 0; } -static int wm8731_i2c_attach(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, wm8731_codec_probe); -} +static const struct i2c_device_id wm8731_i2c_id[] = { + { "wm8731", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8731_i2c_id); -/* corgi i2c codec control layer */ static struct i2c_driver wm8731_i2c_driver = { .driver = { .name = "WM8731 I2C Codec", .owner = THIS_MODULE, }, - .id = I2C_DRIVERID_WM8731, - .attach_adapter = wm8731_i2c_attach, - .detach_client = wm8731_i2c_detach, - .command = NULL, + .probe = wm8731_i2c_probe, + .remove = wm8731_i2c_remove, + .id_table = wm8731_i2c_id, }; -static struct i2c_client client_template = { - .name = "WM8731", - .driver = &wm8731_i2c_driver, -}; +static int wm8731_add_i2c_device(struct platform_device *pdev, + const struct wm8731_setup_data *setup) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + int ret; + + ret = i2c_add_driver(&wm8731_i2c_driver); + if (ret != 0) { + dev_err(&pdev->dev, "can't add i2c driver\n"); + return ret; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = setup->i2c_address; + strlcpy(info.type, "wm8731", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(setup->i2c_bus); + if (!adapter) { + dev_err(&pdev->dev, "can't get i2c adapter %d\n", + setup->i2c_bus); + goto err_driver; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + goto err_driver; + } + + return 0; + +err_driver: + i2c_del_driver(&wm8731_i2c_driver); + return -ENODEV; +} #endif +#if defined(CONFIG_SPI_MASTER) +static int __devinit wm8731_spi_probe(struct spi_device *spi) +{ + struct snd_soc_device *socdev = wm8731_socdev; + struct snd_soc_codec *codec = socdev->codec; + int ret; + + codec->control_data = spi; + + ret = wm8731_init(socdev); + if (ret < 0) + dev_err(&spi->dev, "failed to initialise WM8731\n"); + + return ret; +} + +static int __devexit wm8731_spi_remove(struct spi_device *spi) +{ + return 0; +} + +static struct spi_driver wm8731_spi_driver = { + .driver = { + .name = "wm8731", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = wm8731_spi_probe, + .remove = __devexit_p(wm8731_spi_remove), +}; + +static int wm8731_spi_write(struct spi_device *spi, const char *data, int len) +{ + struct spi_transfer t; + struct spi_message m; + u8 msg[2]; + + if (len <= 0) + return 0; + + msg[0] = data[0]; + msg[1] = data[1]; + + spi_message_init(&m); + memset(&t, 0, (sizeof t)); + + t.tx_buf = &msg[0]; + t.len = len; + + spi_message_add_tail(&t, &m); + spi_sync(spi, &m); + + return len; +} +#endif /* CONFIG_SPI_MASTER */ + static int wm8731_probe(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); @@ -682,17 +737,27 @@ static int wm8731_probe(struct platform_device *pdev) INIT_LIST_HEAD(&codec->dapm_paths); wm8731_socdev = socdev; + ret = -ENODEV; + #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) if (setup->i2c_address) { - normal_i2c[0] = setup->i2c_address; codec->hw_write = (hw_write_t)i2c_master_send; - ret = i2c_add_driver(&wm8731_i2c_driver); + ret = wm8731_add_i2c_device(pdev, setup); + } +#endif +#if defined(CONFIG_SPI_MASTER) + if (setup->spi) { + codec->hw_write = (hw_write_t)wm8731_spi_write; + ret = spi_register_driver(&wm8731_spi_driver); if (ret != 0) - printk(KERN_ERR "can't add i2c driver"); + printk(KERN_ERR "can't add spi driver"); } -#else - /* Add other interfaces here */ #endif + + if (ret != 0) { + kfree(codec->private_data); + kfree(codec); + } return ret; } @@ -708,8 +773,12 @@ static int wm8731_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_unregister_device(codec->control_data); i2c_del_driver(&wm8731_i2c_driver); #endif +#if defined(CONFIG_SPI_MASTER) + spi_unregister_driver(&wm8731_spi_driver); +#endif kfree(codec->private_data); kfree(codec); diff --git a/sound/soc/codecs/wm8731.h b/sound/soc/codecs/wm8731.h index 99f2e3c60e3..95190e9c0c1 100644 --- a/sound/soc/codecs/wm8731.h +++ b/sound/soc/codecs/wm8731.h @@ -35,6 +35,8 @@ #define WM8731_DAI 0 struct wm8731_setup_data { + int spi; + int i2c_bus; unsigned short i2c_address; }; diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c index c6a8edf302a..4892e398a59 100644 --- a/sound/soc/codecs/wm8750.c +++ b/sound/soc/codecs/wm8750.c @@ -19,6 +19,7 @@ #include <linux/pm.h> #include <linux/i2c.h> #include <linux/platform_device.h> +#include <linux/spi/spi.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -841,90 +842,147 @@ static struct snd_soc_device *wm8750_socdev; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) /* - * WM8731 2 wire address is determined by GPIO5 + * WM8750 2 wire address is determined by GPIO5 * state during powerup. * low = 0x1a * high = 0x1b */ -static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; -/* Magic definition of all other variables and things */ -I2C_CLIENT_INSMOD; - -static struct i2c_driver wm8750_i2c_driver; -static struct i2c_client client_template; - -static int wm8750_codec_probe(struct i2c_adapter *adap, int addr, int kind) +static int wm8750_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8750_socdev; - struct wm8750_setup_data *setup = socdev->codec_data; struct snd_soc_codec *codec = socdev->codec; - struct i2c_client *i2c; int ret; - if (addr != setup->i2c_address) - return -ENODEV; - - client_template.adapter = adap; - client_template.addr = addr; - - i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); - return -ENOMEM; - } i2c_set_clientdata(i2c, codec); codec->control_data = i2c; - ret = i2c_attach_client(i2c); - if (ret < 0) { - pr_err("failed to attach codec at addr %x\n", addr); - goto err; - } - ret = wm8750_init(socdev); - if (ret < 0) { + if (ret < 0) pr_err("failed to initialise WM8750\n"); - goto err; - } - return ret; -err: - kfree(codec); - kfree(i2c); return ret; } -static int wm8750_i2c_detach(struct i2c_client *client) +static int wm8750_i2c_remove(struct i2c_client *client) { struct snd_soc_codec *codec = i2c_get_clientdata(client); - i2c_detach_client(client); kfree(codec->reg_cache); - kfree(client); return 0; } -static int wm8750_i2c_attach(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, wm8750_codec_probe); -} +static const struct i2c_device_id wm8750_i2c_id[] = { + { "wm8750", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8750_i2c_id); -/* corgi i2c codec control layer */ static struct i2c_driver wm8750_i2c_driver = { .driver = { .name = "WM8750 I2C Codec", .owner = THIS_MODULE, }, - .id = I2C_DRIVERID_WM8750, - .attach_adapter = wm8750_i2c_attach, - .detach_client = wm8750_i2c_detach, - .command = NULL, + .probe = wm8750_i2c_probe, + .remove = wm8750_i2c_remove, + .id_table = wm8750_i2c_id, }; -static struct i2c_client client_template = { - .name = "WM8750", - .driver = &wm8750_i2c_driver, +static int wm8750_add_i2c_device(struct platform_device *pdev, + const struct wm8750_setup_data *setup) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + int ret; + + ret = i2c_add_driver(&wm8750_i2c_driver); + if (ret != 0) { + dev_err(&pdev->dev, "can't add i2c driver\n"); + return ret; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = setup->i2c_address; + strlcpy(info.type, "wm8750", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(setup->i2c_bus); + if (!adapter) { + dev_err(&pdev->dev, "can't get i2c adapter %d\n", + setup->i2c_bus); + goto err_driver; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + goto err_driver; + } + + return 0; + +err_driver: + i2c_del_driver(&wm8750_i2c_driver); + return -ENODEV; +} +#endif + +#if defined(CONFIG_SPI_MASTER) +static int __devinit wm8750_spi_probe(struct spi_device *spi) +{ + struct snd_soc_device *socdev = wm8750_socdev; + struct snd_soc_codec *codec = socdev->codec; + int ret; + + codec->control_data = spi; + + ret = wm8750_init(socdev); + if (ret < 0) + dev_err(&spi->dev, "failed to initialise WM8750\n"); + + return ret; +} + +static int __devexit wm8750_spi_remove(struct spi_device *spi) +{ + return 0; +} + +static struct spi_driver wm8750_spi_driver = { + .driver = { + .name = "wm8750", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = wm8750_spi_probe, + .remove = __devexit_p(wm8750_spi_remove), }; + +static int wm8750_spi_write(struct spi_device *spi, const char *data, int len) +{ + struct spi_transfer t; + struct spi_message m; + u8 msg[2]; + + if (len <= 0) + return 0; + + msg[0] = data[0]; + msg[1] = data[1]; + + spi_message_init(&m); + memset(&t, 0, (sizeof t)); + + t.tx_buf = &msg[0]; + t.len = len; + + spi_message_add_tail(&t, &m); + spi_sync(spi, &m); + + return len; +} #endif static int wm8750_probe(struct platform_device *pdev) @@ -933,7 +991,7 @@ static int wm8750_probe(struct platform_device *pdev) struct wm8750_setup_data *setup = socdev->codec_data; struct snd_soc_codec *codec; struct wm8750_priv *wm8750; - int ret = 0; + int ret; pr_info("WM8750 Audio Codec %s", WM8750_VERSION); codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); @@ -954,18 +1012,27 @@ static int wm8750_probe(struct platform_device *pdev) wm8750_socdev = socdev; INIT_DELAYED_WORK(&codec->delayed_work, wm8750_work); + ret = -ENODEV; + #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) if (setup->i2c_address) { - normal_i2c[0] = setup->i2c_address; codec->hw_write = (hw_write_t)i2c_master_send; - ret = i2c_add_driver(&wm8750_i2c_driver); + ret = wm8750_add_i2c_device(pdev, setup); + } +#endif +#if defined(CONFIG_SPI_MASTER) + if (setup->spi) { + codec->hw_write = (hw_write_t)wm8750_spi_write; + ret = spi_register_driver(&wm8750_spi_driver); if (ret != 0) - printk(KERN_ERR "can't add i2c driver"); + printk(KERN_ERR "can't add spi driver"); } -#else - /* Add other interfaces here */ #endif + if (ret != 0) { + kfree(codec->private_data); + kfree(codec); + } return ret; } @@ -1000,8 +1067,12 @@ static int wm8750_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_unregister_device(codec->control_data); i2c_del_driver(&wm8750_i2c_driver); #endif +#if defined(CONFIG_SPI_MASTER) + spi_unregister_driver(&wm8750_spi_driver); +#endif kfree(codec->private_data); kfree(codec); diff --git a/sound/soc/codecs/wm8750.h b/sound/soc/codecs/wm8750.h index 8ef30e628b2..1dc100e19cf 100644 --- a/sound/soc/codecs/wm8750.h +++ b/sound/soc/codecs/wm8750.h @@ -58,6 +58,8 @@ #define WM8750_SYSCLK 0 struct wm8750_setup_data { + int spi; + int i2c_bus; unsigned short i2c_address; }; diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index dc7b18fd278..8c4df44f334 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -583,7 +583,7 @@ static const struct snd_soc_dapm_route audio_map[] = { /* out 4 */ {"Out4 Mux", "VREF", "VREF"}, - {"Out4 Mux", "Capture ST", "Capture ST Mixer"}, + {"Out4 Mux", "Capture ST", "Playback Mixer"}, {"Out4 Mux", "LOUT2", "LOUT2"}, {"Out 4", NULL, "Out4 Mux"}, {"OUT4", NULL, "Out 4"}, @@ -607,7 +607,7 @@ static const struct snd_soc_dapm_route audio_map[] = { /* Capture Right Mux */ {"Capture Right Mux", "PGA", "Right Capture Volume"}, {"Capture Right Mux", "Line or RXP-RXN", "Line Right Mux"}, - {"Capture Right Mux", "Sidetone", "Capture ST Mixer"}, + {"Capture Right Mux", "Sidetone", "Playback Mixer"}, /* Mono Capture mixer-mux */ {"Capture Right Mixer", "Stereo", "Capture Right Mux"}, @@ -1637,86 +1637,86 @@ static struct snd_soc_device *wm8753_socdev; * low = 0x1a * high = 0x1b */ -static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; -/* Magic definition of all other variables and things */ -I2C_CLIENT_INSMOD; - -static struct i2c_driver wm8753_i2c_driver; -static struct i2c_client client_template; - -static int wm8753_codec_probe(struct i2c_adapter *adap, int addr, int kind) +static int wm8753_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8753_socdev; - struct wm8753_setup_data *setup = socdev->codec_data; struct snd_soc_codec *codec = socdev->codec; - struct i2c_client *i2c; int ret; - if (addr != setup->i2c_address) - return -ENODEV; - - client_template.adapter = adap; - client_template.addr = addr; - - i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (!i2c) { - kfree(codec); - return -ENOMEM; - } i2c_set_clientdata(i2c, codec); codec->control_data = i2c; - ret = i2c_attach_client(i2c); - if (ret < 0) { - pr_err("failed to attach codec at addr %x\n", addr); - goto err; - } - ret = wm8753_init(socdev); - if (ret < 0) { + if (ret < 0) pr_err("failed to initialise WM8753\n"); - goto err; - } return ret; - -err: - kfree(codec); - kfree(i2c); - return ret; } -static int wm8753_i2c_detach(struct i2c_client *client) +static int wm8753_i2c_remove(struct i2c_client *client) { struct snd_soc_codec *codec = i2c_get_clientdata(client); - i2c_detach_client(client); kfree(codec->reg_cache); - kfree(client); return 0; } -static int wm8753_i2c_attach(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, wm8753_codec_probe); -} +static const struct i2c_device_id wm8753_i2c_id[] = { + { "wm8753", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8753_i2c_id); -/* corgi i2c codec control layer */ static struct i2c_driver wm8753_i2c_driver = { .driver = { .name = "WM8753 I2C Codec", .owner = THIS_MODULE, }, - .id = I2C_DRIVERID_WM8753, - .attach_adapter = wm8753_i2c_attach, - .detach_client = wm8753_i2c_detach, - .command = NULL, + .probe = wm8753_i2c_probe, + .remove = wm8753_i2c_remove, + .id_table = wm8753_i2c_id, }; -static struct i2c_client client_template = { - .name = "WM8753", - .driver = &wm8753_i2c_driver, -}; +static int wm8753_add_i2c_device(struct platform_device *pdev, + const struct wm8753_setup_data *setup) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + int ret; + + ret = i2c_add_driver(&wm8753_i2c_driver); + if (ret != 0) { + dev_err(&pdev->dev, "can't add i2c driver\n"); + return ret; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = setup->i2c_address; + strlcpy(info.type, "wm8753", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(setup->i2c_bus); + if (!adapter) { + dev_err(&pdev->dev, "can't get i2c adapter %d\n", + setup->i2c_bus); + goto err_driver; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + goto err_driver; + } + + return 0; + +err_driver: + i2c_del_driver(&wm8753_i2c_driver); + return -ENODEV; +} #endif static int wm8753_probe(struct platform_device *pdev) @@ -1750,15 +1750,17 @@ static int wm8753_probe(struct platform_device *pdev) #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) if (setup->i2c_address) { - normal_i2c[0] = setup->i2c_address; codec->hw_write = (hw_write_t)i2c_master_send; - ret = i2c_add_driver(&wm8753_i2c_driver); - if (ret != 0) - printk(KERN_ERR "can't add i2c driver"); + ret = wm8753_add_i2c_device(pdev, setup); } #else /* Add other interfaces here */ #endif + + if (ret != 0) { + kfree(codec->private_data); + kfree(codec); + } return ret; } @@ -1793,6 +1795,7 @@ static int wm8753_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_unregister_device(codec->control_data); i2c_del_driver(&wm8753_i2c_driver); #endif kfree(codec->private_data); diff --git a/sound/soc/codecs/wm8753.h b/sound/soc/codecs/wm8753.h index 44f5f1ff0cc..7defde069f1 100644 --- a/sound/soc/codecs/wm8753.h +++ b/sound/soc/codecs/wm8753.h @@ -79,6 +79,7 @@ #define WM8753_ADCTL2 0x3f struct wm8753_setup_data { + int i2c_bus; unsigned short i2c_address; }; diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c new file mode 100644 index 00000000000..0b8c6d38b48 --- /dev/null +++ b/sound/soc/codecs/wm8900.c @@ -0,0 +1,1542 @@ +/* + * wm8900.c -- WM8900 ALSA Soc Audio driver + * + * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * TODO: + * - Tristating. + * - TDM. + * - Jack detect. + * - FLL source configuration, currently only MCLK is supported. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "wm8900.h" + +/* WM8900 register space */ +#define WM8900_REG_RESET 0x0 +#define WM8900_REG_ID 0x0 +#define WM8900_REG_POWER1 0x1 +#define WM8900_REG_POWER2 0x2 +#define WM8900_REG_POWER3 0x3 +#define WM8900_REG_AUDIO1 0x4 +#define WM8900_REG_AUDIO2 0x5 +#define WM8900_REG_CLOCKING1 0x6 +#define WM8900_REG_CLOCKING2 0x7 +#define WM8900_REG_AUDIO3 0x8 +#define WM8900_REG_AUDIO4 0x9 +#define WM8900_REG_DACCTRL 0xa +#define WM8900_REG_LDAC_DV 0xb +#define WM8900_REG_RDAC_DV 0xc +#define WM8900_REG_SIDETONE 0xd +#define WM8900_REG_ADCCTRL 0xe +#define WM8900_REG_LADC_DV 0xf +#define WM8900_REG_RADC_DV 0x10 +#define WM8900_REG_GPIO 0x12 +#define WM8900_REG_INCTL 0x15 +#define WM8900_REG_LINVOL 0x16 +#define WM8900_REG_RINVOL 0x17 +#define WM8900_REG_INBOOSTMIX1 0x18 +#define WM8900_REG_INBOOSTMIX2 0x19 +#define WM8900_REG_ADCPATH 0x1a +#define WM8900_REG_AUXBOOST 0x1b +#define WM8900_REG_ADDCTL 0x1e +#define WM8900_REG_FLLCTL1 0x24 +#define WM8900_REG_FLLCTL2 0x25 +#define WM8900_REG_FLLCTL3 0x26 +#define WM8900_REG_FLLCTL4 0x27 +#define WM8900_REG_FLLCTL5 0x28 +#define WM8900_REG_FLLCTL6 0x29 +#define WM8900_REG_LOUTMIXCTL1 0x2c +#define WM8900_REG_ROUTMIXCTL1 0x2d +#define WM8900_REG_BYPASS1 0x2e +#define WM8900_REG_BYPASS2 0x2f +#define WM8900_REG_AUXOUT_CTL 0x30 +#define WM8900_REG_LOUT1CTL 0x33 +#define WM8900_REG_ROUT1CTL 0x34 +#define WM8900_REG_LOUT2CTL 0x35 +#define WM8900_REG_ROUT2CTL 0x36 +#define WM8900_REG_HPCTL1 0x3a +#define WM8900_REG_OUTBIASCTL 0x73 + +#define WM8900_MAXREG 0x80 + +#define WM8900_REG_ADDCTL_OUT1_DIS 0x80 +#define WM8900_REG_ADDCTL_OUT2_DIS 0x40 +#define WM8900_REG_ADDCTL_VMID_DIS 0x20 +#define WM8900_REG_ADDCTL_BIAS_SRC 0x10 +#define WM8900_REG_ADDCTL_VMID_SOFTST 0x04 +#define WM8900_REG_ADDCTL_TEMP_SD 0x02 + +#define WM8900_REG_GPIO_TEMP_ENA 0x2 + +#define WM8900_REG_POWER1_STARTUP_BIAS_ENA 0x0100 +#define WM8900_REG_POWER1_BIAS_ENA 0x0008 +#define WM8900_REG_POWER1_VMID_BUF_ENA 0x0004 +#define WM8900_REG_POWER1_FLL_ENA 0x0040 + +#define WM8900_REG_POWER2_SYSCLK_ENA 0x8000 +#define WM8900_REG_POWER2_ADCL_ENA 0x0002 +#define WM8900_REG_POWER2_ADCR_ENA 0x0001 + +#define WM8900_REG_POWER3_DACL_ENA 0x0002 +#define WM8900_REG_POWER3_DACR_ENA 0x0001 + +#define WM8900_REG_AUDIO1_AIF_FMT_MASK 0x0018 +#define WM8900_REG_AUDIO1_LRCLK_INV 0x0080 +#define WM8900_REG_AUDIO1_BCLK_INV 0x0100 + +#define WM8900_REG_CLOCKING1_BCLK_DIR 0x1 +#define WM8900_REG_CLOCKING1_MCLK_SRC 0x100 +#define WM8900_REG_CLOCKING1_BCLK_MASK (~0x01e) +#define WM8900_REG_CLOCKING1_OPCLK_MASK (~0x7000) + +#define WM8900_REG_CLOCKING2_ADC_CLKDIV 0xe0 +#define WM8900_REG_CLOCKING2_DAC_CLKDIV 0x1c + +#define WM8900_REG_DACCTRL_MUTE 0x004 +#define WM8900_REG_DACCTRL_AIF_LRCLKRATE 0x400 + +#define WM8900_REG_AUDIO3_ADCLRC_DIR 0x0800 + +#define WM8900_REG_AUDIO4_DACLRC_DIR 0x0800 + +#define WM8900_REG_FLLCTL1_OSC_ENA 0x100 + +#define WM8900_REG_FLLCTL6_FLL_SLOW_LOCK_REF 0x100 + +#define WM8900_REG_HPCTL1_HP_IPSTAGE_ENA 0x80 +#define WM8900_REG_HPCTL1_HP_OPSTAGE_ENA 0x40 +#define WM8900_REG_HPCTL1_HP_CLAMP_IP 0x20 +#define WM8900_REG_HPCTL1_HP_CLAMP_OP 0x10 +#define WM8900_REG_HPCTL1_HP_SHORT 0x08 +#define WM8900_REG_HPCTL1_HP_SHORT2 0x04 + +#define WM8900_LRC_MASK 0xfc00 + +struct snd_soc_codec_device soc_codec_dev_wm8900; + +struct wm8900_priv { + u32 fll_in; /* FLL input frequency */ + u32 fll_out; /* FLL output frequency */ +}; + +/* + * wm8900 register cache. We can't read the entire register space and we + * have slow control buses so we cache the registers. + */ +static const u16 wm8900_reg_defaults[WM8900_MAXREG] = { + 0x8900, 0x0000, + 0xc000, 0x0000, + 0x4050, 0x4000, + 0x0008, 0x0000, + 0x0040, 0x0040, + 0x1004, 0x00c0, + 0x00c0, 0x0000, + 0x0100, 0x00c0, + 0x00c0, 0x0000, + 0xb001, 0x0000, + 0x0000, 0x0044, + 0x004c, 0x004c, + 0x0044, 0x0044, + 0x0000, 0x0044, + 0x0000, 0x0000, + 0x0002, 0x0000, + 0x0000, 0x0000, + 0x0000, 0x0000, + 0x0008, 0x0000, + 0x0000, 0x0008, + 0x0097, 0x0100, + 0x0000, 0x0000, + 0x0050, 0x0050, + 0x0055, 0x0055, + 0x0055, 0x0000, + 0x0000, 0x0079, + 0x0079, 0x0079, + 0x0079, 0x0000, + /* Remaining registers all zero */ +}; + +/* + * read wm8900 register cache + */ +static inline unsigned int wm8900_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + + BUG_ON(reg >= WM8900_MAXREG); + + if (reg == WM8900_REG_ID) + return 0; + + return cache[reg]; +} + +/* + * write wm8900 register cache + */ +static inline void wm8900_write_reg_cache(struct snd_soc_codec *codec, + u16 reg, unsigned int value) +{ + u16 *cache = codec->reg_cache; + + BUG_ON(reg >= WM8900_MAXREG); + + cache[reg] = value; +} + +/* + * write to the WM8900 register space + */ +static int wm8900_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 data[3]; + + if (value == wm8900_read_reg_cache(codec, reg)) + return 0; + + /* data is + * D15..D9 WM8900 register offset + * D8...D0 register data + */ + data[0] = reg; + data[1] = value >> 8; + data[2] = value & 0x00ff; + + wm8900_write_reg_cache(codec, reg, value); + if (codec->hw_write(codec->control_data, data, 3) == 3) + return 0; + else + return -EIO; +} + +/* + * Read from the wm8900. + */ +static unsigned int wm8900_chip_read(struct snd_soc_codec *codec, u8 reg) +{ + struct i2c_msg xfer[2]; + u16 data; + int ret; + struct i2c_client *client = codec->control_data; + + BUG_ON(reg != WM8900_REG_ID && reg != WM8900_REG_POWER1); + + /* Write register */ + xfer[0].addr = client->addr; + xfer[0].flags = 0; + xfer[0].len = 1; + xfer[0].buf = ® + + /* Read data */ + xfer[1].addr = client->addr; + xfer[1].flags = I2C_M_RD; + xfer[1].len = 2; + xfer[1].buf = (u8 *)&data; + + ret = i2c_transfer(client->adapter, xfer, 2); + if (ret != 2) { + printk(KERN_CRIT "i2c_transfer returned %d\n", ret); + return 0; + } + + return (data >> 8) | ((data & 0xff) << 8); +} + +/* + * Read from the WM8900 register space. Most registers can't be read + * and are therefore supplied from cache. + */ +static unsigned int wm8900_read(struct snd_soc_codec *codec, unsigned int reg) +{ + switch (reg) { + case WM8900_REG_ID: + return wm8900_chip_read(codec, reg); + default: + return wm8900_read_reg_cache(codec, reg); + } +} + +static void wm8900_reset(struct snd_soc_codec *codec) +{ + wm8900_write(codec, WM8900_REG_RESET, 0); + + memcpy(codec->reg_cache, wm8900_reg_defaults, + sizeof(codec->reg_cache)); +} + +static int wm8900_hp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + u16 hpctl1 = wm8900_read(codec, WM8900_REG_HPCTL1); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + /* Clamp headphone outputs */ + hpctl1 = WM8900_REG_HPCTL1_HP_CLAMP_IP | + WM8900_REG_HPCTL1_HP_CLAMP_OP; + wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1); + break; + + case SND_SOC_DAPM_POST_PMU: + /* Enable the input stage */ + hpctl1 &= ~WM8900_REG_HPCTL1_HP_CLAMP_IP; + hpctl1 |= WM8900_REG_HPCTL1_HP_SHORT | + WM8900_REG_HPCTL1_HP_SHORT2 | + WM8900_REG_HPCTL1_HP_IPSTAGE_ENA; + wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1); + + msleep(400); + + /* Enable the output stage */ + hpctl1 &= ~WM8900_REG_HPCTL1_HP_CLAMP_OP; + hpctl1 |= WM8900_REG_HPCTL1_HP_OPSTAGE_ENA; + wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1); + + /* Remove the shorts */ + hpctl1 &= ~WM8900_REG_HPCTL1_HP_SHORT2; + wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1); + hpctl1 &= ~WM8900_REG_HPCTL1_HP_SHORT; + wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1); + break; + + case SND_SOC_DAPM_PRE_PMD: + /* Short the output */ + hpctl1 |= WM8900_REG_HPCTL1_HP_SHORT; + wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1); + + /* Disable the output stage */ + hpctl1 &= ~WM8900_REG_HPCTL1_HP_OPSTAGE_ENA; + wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1); + + /* Clamp the outputs and power down input */ + hpctl1 |= WM8900_REG_HPCTL1_HP_CLAMP_IP | + WM8900_REG_HPCTL1_HP_CLAMP_OP; + hpctl1 &= ~WM8900_REG_HPCTL1_HP_IPSTAGE_ENA; + wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1); + break; + + case SND_SOC_DAPM_POST_PMD: + /* Disable everything */ + wm8900_write(codec, WM8900_REG_HPCTL1, 0); + break; + + default: + BUG(); + } + + return 0; +} + +static const DECLARE_TLV_DB_SCALE(out_pga_tlv, -5700, 100, 0); + +static const DECLARE_TLV_DB_SCALE(out_mix_tlv, -1500, 300, 0); + +static const DECLARE_TLV_DB_SCALE(in_boost_tlv, -1200, 600, 0); + +static const DECLARE_TLV_DB_SCALE(in_pga_tlv, -1200, 100, 0); + +static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0); + +static const DECLARE_TLV_DB_SCALE(dac_tlv, -7200, 75, 1); + +static const DECLARE_TLV_DB_SCALE(adc_svol_tlv, -3600, 300, 0); + +static const DECLARE_TLV_DB_SCALE(adc_tlv, -7200, 75, 1); + +static const char *mic_bias_level_txt[] = { "0.9*AVDD", "0.65*AVDD" }; + +static const struct soc_enum mic_bias_level = +SOC_ENUM_SINGLE(WM8900_REG_INCTL, 8, 2, mic_bias_level_txt); + +static const char *dac_mute_rate_txt[] = { "Fast", "Slow" }; + +static const struct soc_enum dac_mute_rate = +SOC_ENUM_SINGLE(WM8900_REG_DACCTRL, 7, 2, dac_mute_rate_txt); + +static const char *dac_deemphasis_txt[] = { + "Disabled", "32kHz", "44.1kHz", "48kHz" +}; + +static const struct soc_enum dac_deemphasis = +SOC_ENUM_SINGLE(WM8900_REG_DACCTRL, 4, 4, dac_deemphasis_txt); + +static const char *adc_hpf_cut_txt[] = { + "Hi-fi mode", "Voice mode 1", "Voice mode 2", "Voice mode 3" +}; + +static const struct soc_enum adc_hpf_cut = +SOC_ENUM_SINGLE(WM8900_REG_ADCCTRL, 5, 4, adc_hpf_cut_txt); + +static const char *lr_txt[] = { + "Left", "Right" +}; + +static const struct soc_enum aifl_src = +SOC_ENUM_SINGLE(WM8900_REG_AUDIO1, 15, 2, lr_txt); + +static const struct soc_enum aifr_src = +SOC_ENUM_SINGLE(WM8900_REG_AUDIO1, 14, 2, lr_txt); + +static const struct soc_enum dacl_src = +SOC_ENUM_SINGLE(WM8900_REG_AUDIO2, 15, 2, lr_txt); + +static const struct soc_enum dacr_src = +SOC_ENUM_SINGLE(WM8900_REG_AUDIO2, 14, 2, lr_txt); + +static const char *sidetone_txt[] = { + "Disabled", "Left ADC", "Right ADC" +}; + +static const struct soc_enum dacl_sidetone = +SOC_ENUM_SINGLE(WM8900_REG_SIDETONE, 2, 3, sidetone_txt); + +static const struct soc_enum dacr_sidetone = +SOC_ENUM_SINGLE(WM8900_REG_SIDETONE, 0, 3, sidetone_txt); + +static const struct snd_kcontrol_new wm8900_snd_controls[] = { +SOC_ENUM("Mic Bias Level", mic_bias_level), + +SOC_SINGLE_TLV("Left Input PGA Volume", WM8900_REG_LINVOL, 0, 31, 0, + in_pga_tlv), +SOC_SINGLE("Left Input PGA Switch", WM8900_REG_LINVOL, 6, 1, 1), +SOC_SINGLE("Left Input PGA ZC Switch", WM8900_REG_LINVOL, 7, 1, 0), + +SOC_SINGLE_TLV("Right Input PGA Volume", WM8900_REG_RINVOL, 0, 31, 0, + in_pga_tlv), +SOC_SINGLE("Right Input PGA Switch", WM8900_REG_RINVOL, 6, 1, 1), +SOC_SINGLE("Right Input PGA ZC Switch", WM8900_REG_RINVOL, 7, 1, 0), + +SOC_SINGLE("DAC Soft Mute Switch", WM8900_REG_DACCTRL, 6, 1, 1), +SOC_ENUM("DAC Mute Rate", dac_mute_rate), +SOC_SINGLE("DAC Mono Switch", WM8900_REG_DACCTRL, 9, 1, 0), +SOC_ENUM("DAC Deemphasis", dac_deemphasis), +SOC_SINGLE("DAC Sloping Stopband Filter Switch", WM8900_REG_DACCTRL, 8, 1, 0), +SOC_SINGLE("DAC Sigma-Delta Modulator Clock Switch", WM8900_REG_DACCTRL, + 12, 1, 0), + +SOC_SINGLE("ADC HPF Switch", WM8900_REG_ADCCTRL, 8, 1, 0), +SOC_ENUM("ADC HPF Cut-Off", adc_hpf_cut), +SOC_DOUBLE("ADC Invert Switch", WM8900_REG_ADCCTRL, 1, 0, 1, 0), +SOC_SINGLE_TLV("Left ADC Sidetone Volume", WM8900_REG_SIDETONE, 9, 12, 0, + adc_svol_tlv), +SOC_SINGLE_TLV("Right ADC Sidetone Volume", WM8900_REG_SIDETONE, 5, 12, 0, + adc_svol_tlv), +SOC_ENUM("Left Digital Audio Source", aifl_src), +SOC_ENUM("Right Digital Audio Source", aifr_src), + +SOC_SINGLE_TLV("DAC Input Boost Volume", WM8900_REG_AUDIO2, 10, 4, 0, + dac_boost_tlv), +SOC_ENUM("Left DAC Source", dacl_src), +SOC_ENUM("Right DAC Source", dacr_src), +SOC_ENUM("Left DAC Sidetone", dacl_sidetone), +SOC_ENUM("Right DAC Sidetone", dacr_sidetone), +SOC_DOUBLE("DAC Invert Switch", WM8900_REG_DACCTRL, 1, 0, 1, 0), + +SOC_DOUBLE_R_TLV("Digital Playback Volume", + WM8900_REG_LDAC_DV, WM8900_REG_RDAC_DV, + 1, 96, 0, dac_tlv), +SOC_DOUBLE_R_TLV("Digital Capture Volume", + WM8900_REG_LADC_DV, WM8900_REG_RADC_DV, 1, 119, 0, adc_tlv), + +SOC_SINGLE_TLV("LINPUT3 Bypass Volume", WM8900_REG_LOUTMIXCTL1, 4, 7, 0, + out_mix_tlv), +SOC_SINGLE_TLV("RINPUT3 Bypass Volume", WM8900_REG_ROUTMIXCTL1, 4, 7, 0, + out_mix_tlv), +SOC_SINGLE_TLV("Left AUX Bypass Volume", WM8900_REG_AUXOUT_CTL, 4, 7, 0, + out_mix_tlv), +SOC_SINGLE_TLV("Right AUX Bypass Volume", WM8900_REG_AUXOUT_CTL, 0, 7, 0, + out_mix_tlv), + +SOC_SINGLE_TLV("LeftIn to RightOut Mixer Volume", WM8900_REG_BYPASS1, 0, 7, 0, + out_mix_tlv), +SOC_SINGLE_TLV("LeftIn to LeftOut Mixer Volume", WM8900_REG_BYPASS1, 4, 7, 0, + out_mix_tlv), +SOC_SINGLE_TLV("RightIn to LeftOut Mixer Volume", WM8900_REG_BYPASS2, 0, 7, 0, + out_mix_tlv), +SOC_SINGLE_TLV("RightIn to RightOut Mixer Volume", WM8900_REG_BYPASS2, 4, 7, 0, + out_mix_tlv), + +SOC_SINGLE_TLV("IN2L Boost Volume", WM8900_REG_INBOOSTMIX1, 0, 3, 0, + in_boost_tlv), +SOC_SINGLE_TLV("IN3L Boost Volume", WM8900_REG_INBOOSTMIX1, 4, 3, 0, + in_boost_tlv), +SOC_SINGLE_TLV("IN2R Boost Volume", WM8900_REG_INBOOSTMIX2, 0, 3, 0, + in_boost_tlv), +SOC_SINGLE_TLV("IN3R Boost Volume", WM8900_REG_INBOOSTMIX2, 4, 3, 0, + in_boost_tlv), +SOC_SINGLE_TLV("Left AUX Boost Volume", WM8900_REG_AUXBOOST, 4, 3, 0, + in_boost_tlv), +SOC_SINGLE_TLV("Right AUX Boost Volume", WM8900_REG_AUXBOOST, 0, 3, 0, + in_boost_tlv), + +SOC_DOUBLE_R_TLV("LINEOUT1 Volume", WM8900_REG_LOUT1CTL, WM8900_REG_ROUT1CTL, + 0, 63, 0, out_pga_tlv), +SOC_DOUBLE_R("LINEOUT1 Switch", WM8900_REG_LOUT1CTL, WM8900_REG_ROUT1CTL, + 6, 1, 1), +SOC_DOUBLE_R("LINEOUT1 ZC Switch", WM8900_REG_LOUT1CTL, WM8900_REG_ROUT1CTL, + 7, 1, 0), + +SOC_DOUBLE_R_TLV("LINEOUT2 Volume", + WM8900_REG_LOUT2CTL, WM8900_REG_ROUT2CTL, + 0, 63, 0, out_pga_tlv), +SOC_DOUBLE_R("LINEOUT2 Switch", + WM8900_REG_LOUT2CTL, WM8900_REG_ROUT2CTL, 6, 1, 1), +SOC_DOUBLE_R("LINEOUT2 ZC Switch", + WM8900_REG_LOUT2CTL, WM8900_REG_ROUT2CTL, 7, 1, 0), +SOC_SINGLE("LINEOUT2 LP -12dB", WM8900_REG_LOUTMIXCTL1, + 0, 1, 1), + +}; + +/* add non dapm controls */ +static int wm8900_add_controls(struct snd_soc_codec *codec) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(wm8900_snd_controls); i++) { + err = snd_ctl_add(codec->card, + snd_soc_cnew(&wm8900_snd_controls[i], + codec, NULL)); + if (err < 0) + return err; + } + + return 0; +} + +static const struct snd_kcontrol_new wm8900_dapm_loutput2_control = +SOC_DAPM_SINGLE("LINEOUT2L Switch", WM8900_REG_POWER3, 6, 1, 0); + +static const struct snd_kcontrol_new wm8900_dapm_routput2_control = +SOC_DAPM_SINGLE("LINEOUT2R Switch", WM8900_REG_POWER3, 5, 1, 0); + +static const struct snd_kcontrol_new wm8900_loutmix_controls[] = { +SOC_DAPM_SINGLE("LINPUT3 Bypass Switch", WM8900_REG_LOUTMIXCTL1, 7, 1, 0), +SOC_DAPM_SINGLE("AUX Bypass Switch", WM8900_REG_AUXOUT_CTL, 7, 1, 0), +SOC_DAPM_SINGLE("Left Input Mixer Switch", WM8900_REG_BYPASS1, 7, 1, 0), +SOC_DAPM_SINGLE("Right Input Mixer Switch", WM8900_REG_BYPASS2, 3, 1, 0), +SOC_DAPM_SINGLE("DACL Switch", WM8900_REG_LOUTMIXCTL1, 8, 1, 0), +}; + +static const struct snd_kcontrol_new wm8900_routmix_controls[] = { +SOC_DAPM_SINGLE("RINPUT3 Bypass Switch", WM8900_REG_ROUTMIXCTL1, 7, 1, 0), +SOC_DAPM_SINGLE("AUX Bypass Switch", WM8900_REG_AUXOUT_CTL, 3, 1, 0), +SOC_DAPM_SINGLE("Left Input Mixer Switch", WM8900_REG_BYPASS1, 3, 1, 0), +SOC_DAPM_SINGLE("Right Input Mixer Switch", WM8900_REG_BYPASS2, 7, 1, 0), +SOC_DAPM_SINGLE("DACR Switch", WM8900_REG_ROUTMIXCTL1, 8, 1, 0), +}; + +static const struct snd_kcontrol_new wm8900_linmix_controls[] = { +SOC_DAPM_SINGLE("LINPUT2 Switch", WM8900_REG_INBOOSTMIX1, 2, 1, 1), +SOC_DAPM_SINGLE("LINPUT3 Switch", WM8900_REG_INBOOSTMIX1, 6, 1, 1), +SOC_DAPM_SINGLE("AUX Switch", WM8900_REG_AUXBOOST, 6, 1, 1), +SOC_DAPM_SINGLE("Input PGA Switch", WM8900_REG_ADCPATH, 6, 1, 0), +}; + +static const struct snd_kcontrol_new wm8900_rinmix_controls[] = { +SOC_DAPM_SINGLE("RINPUT2 Switch", WM8900_REG_INBOOSTMIX2, 2, 1, 1), +SOC_DAPM_SINGLE("RINPUT3 Switch", WM8900_REG_INBOOSTMIX2, 6, 1, 1), +SOC_DAPM_SINGLE("AUX Switch", WM8900_REG_AUXBOOST, 2, 1, 1), +SOC_DAPM_SINGLE("Input PGA Switch", WM8900_REG_ADCPATH, 2, 1, 0), +}; + +static const struct snd_kcontrol_new wm8900_linpga_controls[] = { +SOC_DAPM_SINGLE("LINPUT1 Switch", WM8900_REG_INCTL, 6, 1, 0), +SOC_DAPM_SINGLE("LINPUT2 Switch", WM8900_REG_INCTL, 5, 1, 0), +SOC_DAPM_SINGLE("LINPUT3 Switch", WM8900_REG_INCTL, 4, 1, 0), +}; + +static const struct snd_kcontrol_new wm8900_rinpga_controls[] = { +SOC_DAPM_SINGLE("RINPUT1 Switch", WM8900_REG_INCTL, 2, 1, 0), +SOC_DAPM_SINGLE("RINPUT2 Switch", WM8900_REG_INCTL, 1, 1, 0), +SOC_DAPM_SINGLE("RINPUT3 Switch", WM8900_REG_INCTL, 0, 1, 0), +}; + +static const char *wm9700_lp_mux[] = { "Disabled", "Enabled" }; + +static const struct soc_enum wm8900_lineout2_lp_mux = +SOC_ENUM_SINGLE(WM8900_REG_LOUTMIXCTL1, 1, 2, wm9700_lp_mux); + +static const struct snd_kcontrol_new wm8900_lineout2_lp = +SOC_DAPM_ENUM("Route", wm8900_lineout2_lp_mux); + +static const struct snd_soc_dapm_widget wm8900_dapm_widgets[] = { + +/* Externally visible pins */ +SND_SOC_DAPM_OUTPUT("LINEOUT1L"), +SND_SOC_DAPM_OUTPUT("LINEOUT1R"), +SND_SOC_DAPM_OUTPUT("LINEOUT2L"), +SND_SOC_DAPM_OUTPUT("LINEOUT2R"), +SND_SOC_DAPM_OUTPUT("HP_L"), +SND_SOC_DAPM_OUTPUT("HP_R"), + +SND_SOC_DAPM_INPUT("RINPUT1"), +SND_SOC_DAPM_INPUT("LINPUT1"), +SND_SOC_DAPM_INPUT("RINPUT2"), +SND_SOC_DAPM_INPUT("LINPUT2"), +SND_SOC_DAPM_INPUT("RINPUT3"), +SND_SOC_DAPM_INPUT("LINPUT3"), +SND_SOC_DAPM_INPUT("AUX"), + +SND_SOC_DAPM_VMID("VMID"), + +/* Input */ +SND_SOC_DAPM_MIXER("Left Input PGA", WM8900_REG_POWER2, 3, 0, + wm8900_linpga_controls, + ARRAY_SIZE(wm8900_linpga_controls)), +SND_SOC_DAPM_MIXER("Right Input PGA", WM8900_REG_POWER2, 2, 0, + wm8900_rinpga_controls, + ARRAY_SIZE(wm8900_rinpga_controls)), + +SND_SOC_DAPM_MIXER("Left Input Mixer", WM8900_REG_POWER2, 5, 0, + wm8900_linmix_controls, + ARRAY_SIZE(wm8900_linmix_controls)), +SND_SOC_DAPM_MIXER("Right Input Mixer", WM8900_REG_POWER2, 4, 0, + wm8900_rinmix_controls, + ARRAY_SIZE(wm8900_rinmix_controls)), + +SND_SOC_DAPM_MICBIAS("Mic Bias", WM8900_REG_POWER1, 4, 0), + +SND_SOC_DAPM_ADC("ADCL", "Left HiFi Capture", WM8900_REG_POWER2, 1, 0), +SND_SOC_DAPM_ADC("ADCR", "Right HiFi Capture", WM8900_REG_POWER2, 0, 0), + +/* Output */ +SND_SOC_DAPM_DAC("DACL", "Left HiFi Playback", WM8900_REG_POWER3, 1, 0), +SND_SOC_DAPM_DAC("DACR", "Right HiFi Playback", WM8900_REG_POWER3, 0, 0), + +SND_SOC_DAPM_PGA_E("Headphone Amplifier", WM8900_REG_POWER3, 7, 0, NULL, 0, + wm8900_hp_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), + +SND_SOC_DAPM_PGA("LINEOUT1L PGA", WM8900_REG_POWER2, 8, 0, NULL, 0), +SND_SOC_DAPM_PGA("LINEOUT1R PGA", WM8900_REG_POWER2, 7, 0, NULL, 0), + +SND_SOC_DAPM_MUX("LINEOUT2 LP", SND_SOC_NOPM, 0, 0, &wm8900_lineout2_lp), +SND_SOC_DAPM_PGA("LINEOUT2L PGA", WM8900_REG_POWER3, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA("LINEOUT2R PGA", WM8900_REG_POWER3, 5, 0, NULL, 0), + +SND_SOC_DAPM_MIXER("Left Output Mixer", WM8900_REG_POWER3, 3, 0, + wm8900_loutmix_controls, + ARRAY_SIZE(wm8900_loutmix_controls)), +SND_SOC_DAPM_MIXER("Right Output Mixer", WM8900_REG_POWER3, 2, 0, + wm8900_routmix_controls, + ARRAY_SIZE(wm8900_routmix_controls)), +}; + +/* Target, Path, Source */ +static const struct snd_soc_dapm_route audio_map[] = { +/* Inputs */ +{"Left Input PGA", "LINPUT1 Switch", "LINPUT1"}, +{"Left Input PGA", "LINPUT2 Switch", "LINPUT2"}, +{"Left Input PGA", "LINPUT3 Switch", "LINPUT3"}, + +{"Right Input PGA", "RINPUT1 Switch", "RINPUT1"}, +{"Right Input PGA", "RINPUT2 Switch", "RINPUT2"}, +{"Right Input PGA", "RINPUT3 Switch", "RINPUT3"}, + +{"Left Input Mixer", "LINPUT2 Switch", "LINPUT2"}, +{"Left Input Mixer", "LINPUT3 Switch", "LINPUT3"}, +{"Left Input Mixer", "AUX Switch", "AUX"}, +{"Left Input Mixer", "Input PGA Switch", "Left Input PGA"}, + +{"Right Input Mixer", "RINPUT2 Switch", "RINPUT2"}, +{"Right Input Mixer", "RINPUT3 Switch", "RINPUT3"}, +{"Right Input Mixer", "AUX Switch", "AUX"}, +{"Right Input Mixer", "Input PGA Switch", "Right Input PGA"}, + +{"ADCL", NULL, "Left Input Mixer"}, +{"ADCR", NULL, "Right Input Mixer"}, + +/* Outputs */ +{"LINEOUT1L", NULL, "LINEOUT1L PGA"}, +{"LINEOUT1L PGA", NULL, "Left Output Mixer"}, +{"LINEOUT1R", NULL, "LINEOUT1R PGA"}, +{"LINEOUT1R PGA", NULL, "Right Output Mixer"}, + +{"LINEOUT2L PGA", NULL, "Left Output Mixer"}, +{"LINEOUT2 LP", "Disabled", "LINEOUT2L PGA"}, +{"LINEOUT2 LP", "Enabled", "Left Output Mixer"}, +{"LINEOUT2L", NULL, "LINEOUT2 LP"}, + +{"LINEOUT2R PGA", NULL, "Right Output Mixer"}, +{"LINEOUT2 LP", "Disabled", "LINEOUT2R PGA"}, +{"LINEOUT2 LP", "Enabled", "Right Output Mixer"}, +{"LINEOUT2R", NULL, "LINEOUT2 LP"}, + +{"Left Output Mixer", "LINPUT3 Bypass Switch", "LINPUT3"}, +{"Left Output Mixer", "AUX Bypass Switch", "AUX"}, +{"Left Output Mixer", "Left Input Mixer Switch", "Left Input Mixer"}, +{"Left Output Mixer", "Right Input Mixer Switch", "Right Input Mixer"}, +{"Left Output Mixer", "DACL Switch", "DACL"}, + +{"Right Output Mixer", "RINPUT3 Bypass Switch", "RINPUT3"}, +{"Right Output Mixer", "AUX Bypass Switch", "AUX"}, +{"Right Output Mixer", "Left Input Mixer Switch", "Left Input Mixer"}, +{"Right Output Mixer", "Right Input Mixer Switch", "Right Input Mixer"}, +{"Right Output Mixer", "DACR Switch", "DACR"}, + +/* Note that the headphone output stage needs to be connected + * externally to LINEOUT2 via DC blocking capacitors. Other + * configurations are not supported. + * + * Note also that left and right headphone paths are treated as a + * mono path. + */ +{"Headphone Amplifier", NULL, "LINEOUT2 LP"}, +{"Headphone Amplifier", NULL, "LINEOUT2 LP"}, +{"HP_L", NULL, "Headphone Amplifier"}, +{"HP_R", NULL, "Headphone Amplifier"}, +}; + +static int wm8900_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, wm8900_dapm_widgets, + ARRAY_SIZE(wm8900_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_new_widgets(codec); + + return 0; +} + +static int wm8900_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + u16 reg; + + reg = wm8900_read(codec, WM8900_REG_AUDIO1) & ~0x60; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + reg |= 0x20; + break; + case SNDRV_PCM_FORMAT_S24_LE: + reg |= 0x40; + break; + case SNDRV_PCM_FORMAT_S32_LE: + reg |= 0x60; + break; + default: + return -EINVAL; + } + + wm8900_write(codec, WM8900_REG_AUDIO1, reg); + + return 0; +} + +/* FLL divisors */ +struct _fll_div { + u16 fll_ratio; + u16 fllclk_div; + u16 fll_slow_lock_ref; + u16 n; + u16 k; +}; + +/* The size in bits of the FLL divide multiplied by 10 + * to allow rounding later */ +#define FIXED_FLL_SIZE ((1 << 16) * 10) + +static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, + unsigned int Fout) +{ + u64 Kpart; + unsigned int K, Ndiv, Nmod, target; + unsigned int div; + + BUG_ON(!Fout); + + /* The FLL must run at 90-100MHz which is then scaled down to + * the output value by FLLCLK_DIV. */ + target = Fout; + div = 1; + while (target < 90000000) { + div *= 2; + target *= 2; + } + + if (target > 100000000) + printk(KERN_WARNING "wm8900: FLL rate %d out of range, Fref=%d" + " Fout=%d\n", target, Fref, Fout); + if (div > 32) { + printk(KERN_ERR "wm8900: Invalid FLL division rate %u, " + "Fref=%d, Fout=%d, target=%d\n", + div, Fref, Fout, target); + return -EINVAL; + } + + fll_div->fllclk_div = div >> 2; + + if (Fref < 48000) + fll_div->fll_slow_lock_ref = 1; + else + fll_div->fll_slow_lock_ref = 0; + + Ndiv = target / Fref; + + if (Fref < 1000000) + fll_div->fll_ratio = 8; + else + fll_div->fll_ratio = 1; + + fll_div->n = Ndiv / fll_div->fll_ratio; + Nmod = (target / fll_div->fll_ratio) % Fref; + + /* Calculate fractional part - scale up so we can round. */ + Kpart = FIXED_FLL_SIZE * (long long)Nmod; + + do_div(Kpart, Fref); + + K = Kpart & 0xFFFFFFFF; + + if ((K % 10) >= 5) + K += 5; + + /* Move down to proper range now rounding is done */ + fll_div->k = K / 10; + + BUG_ON(target != Fout * (fll_div->fllclk_div << 2)); + BUG_ON(!K && target != Fref * fll_div->fll_ratio * fll_div->n); + + return 0; +} + +static int wm8900_set_fll(struct snd_soc_codec *codec, + int fll_id, unsigned int freq_in, unsigned int freq_out) +{ + struct wm8900_priv *wm8900 = codec->private_data; + struct _fll_div fll_div; + unsigned int reg; + + if (wm8900->fll_in == freq_in && wm8900->fll_out == freq_out) + return 0; + + /* The digital side should be disabled during any change. */ + reg = wm8900_read(codec, WM8900_REG_POWER1); + wm8900_write(codec, WM8900_REG_POWER1, + reg & (~WM8900_REG_POWER1_FLL_ENA)); + + /* Disable the FLL? */ + if (!freq_in || !freq_out) { + reg = wm8900_read(codec, WM8900_REG_CLOCKING1); + wm8900_write(codec, WM8900_REG_CLOCKING1, + reg & (~WM8900_REG_CLOCKING1_MCLK_SRC)); + + reg = wm8900_read(codec, WM8900_REG_FLLCTL1); + wm8900_write(codec, WM8900_REG_FLLCTL1, + reg & (~WM8900_REG_FLLCTL1_OSC_ENA)); + + wm8900->fll_in = freq_in; + wm8900->fll_out = freq_out; + + return 0; + } + + if (fll_factors(&fll_div, freq_in, freq_out) != 0) + goto reenable; + + wm8900->fll_in = freq_in; + wm8900->fll_out = freq_out; + + /* The osclilator *MUST* be enabled before we enable the + * digital circuit. */ + wm8900_write(codec, WM8900_REG_FLLCTL1, + fll_div.fll_ratio | WM8900_REG_FLLCTL1_OSC_ENA); + + wm8900_write(codec, WM8900_REG_FLLCTL4, fll_div.n >> 5); + wm8900_write(codec, WM8900_REG_FLLCTL5, + (fll_div.fllclk_div << 6) | (fll_div.n & 0x1f)); + + if (fll_div.k) { + wm8900_write(codec, WM8900_REG_FLLCTL2, + (fll_div.k >> 8) | 0x100); + wm8900_write(codec, WM8900_REG_FLLCTL3, fll_div.k & 0xff); + } else + wm8900_write(codec, WM8900_REG_FLLCTL2, 0); + + if (fll_div.fll_slow_lock_ref) + wm8900_write(codec, WM8900_REG_FLLCTL6, + WM8900_REG_FLLCTL6_FLL_SLOW_LOCK_REF); + else + wm8900_write(codec, WM8900_REG_FLLCTL6, 0); + + reg = wm8900_read(codec, WM8900_REG_POWER1); + wm8900_write(codec, WM8900_REG_POWER1, + reg | WM8900_REG_POWER1_FLL_ENA); + +reenable: + reg = wm8900_read(codec, WM8900_REG_CLOCKING1); + wm8900_write(codec, WM8900_REG_CLOCKING1, + reg | WM8900_REG_CLOCKING1_MCLK_SRC); + + return 0; +} + +static int wm8900_set_dai_pll(struct snd_soc_dai *codec_dai, + int pll_id, unsigned int freq_in, unsigned int freq_out) +{ + return wm8900_set_fll(codec_dai->codec, pll_id, freq_in, freq_out); +} + +static int wm8900_set_dai_clkdiv(struct snd_soc_dai *codec_dai, + int div_id, int div) +{ + struct snd_soc_codec *codec = codec_dai->codec; + unsigned int reg; + + switch (div_id) { + case WM8900_BCLK_DIV: + reg = wm8900_read(codec, WM8900_REG_CLOCKING1); + wm8900_write(codec, WM8900_REG_CLOCKING1, + div | (reg & WM8900_REG_CLOCKING1_BCLK_MASK)); + break; + case WM8900_OPCLK_DIV: + reg = wm8900_read(codec, WM8900_REG_CLOCKING1); + wm8900_write(codec, WM8900_REG_CLOCKING1, + div | (reg & WM8900_REG_CLOCKING1_OPCLK_MASK)); + break; + case WM8900_DAC_LRCLK: + reg = wm8900_read(codec, WM8900_REG_AUDIO4); + wm8900_write(codec, WM8900_REG_AUDIO4, + div | (reg & WM8900_LRC_MASK)); + break; + case WM8900_ADC_LRCLK: + reg = wm8900_read(codec, WM8900_REG_AUDIO3); + wm8900_write(codec, WM8900_REG_AUDIO3, + div | (reg & WM8900_LRC_MASK)); + break; + case WM8900_DAC_CLKDIV: + reg = wm8900_read(codec, WM8900_REG_CLOCKING2); + wm8900_write(codec, WM8900_REG_CLOCKING2, + div | (reg & WM8900_REG_CLOCKING2_DAC_CLKDIV)); + break; + case WM8900_ADC_CLKDIV: + reg = wm8900_read(codec, WM8900_REG_CLOCKING2); + wm8900_write(codec, WM8900_REG_CLOCKING2, + div | (reg & WM8900_REG_CLOCKING2_ADC_CLKDIV)); + break; + case WM8900_LRCLK_MODE: + reg = wm8900_read(codec, WM8900_REG_DACCTRL); + wm8900_write(codec, WM8900_REG_DACCTRL, + div | (reg & WM8900_REG_DACCTRL_AIF_LRCLKRATE)); + break; + default: + return -EINVAL; + } + + return 0; +} + + +static int wm8900_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + unsigned int clocking1, aif1, aif3, aif4; + + clocking1 = wm8900_read(codec, WM8900_REG_CLOCKING1); + aif1 = wm8900_read(codec, WM8900_REG_AUDIO1); + aif3 = wm8900_read(codec, WM8900_REG_AUDIO3); + aif4 = wm8900_read(codec, WM8900_REG_AUDIO4); + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + clocking1 &= ~WM8900_REG_CLOCKING1_BCLK_DIR; + aif3 &= ~WM8900_REG_AUDIO3_ADCLRC_DIR; + aif4 &= ~WM8900_REG_AUDIO4_DACLRC_DIR; + break; + case SND_SOC_DAIFMT_CBS_CFM: + clocking1 &= ~WM8900_REG_CLOCKING1_BCLK_DIR; + aif3 |= WM8900_REG_AUDIO3_ADCLRC_DIR; + aif4 |= WM8900_REG_AUDIO4_DACLRC_DIR; + break; + case SND_SOC_DAIFMT_CBM_CFM: + clocking1 |= WM8900_REG_CLOCKING1_BCLK_DIR; + aif3 |= WM8900_REG_AUDIO3_ADCLRC_DIR; + aif4 |= WM8900_REG_AUDIO4_DACLRC_DIR; + break; + case SND_SOC_DAIFMT_CBM_CFS: + clocking1 |= WM8900_REG_CLOCKING1_BCLK_DIR; + aif3 &= ~WM8900_REG_AUDIO3_ADCLRC_DIR; + aif4 &= ~WM8900_REG_AUDIO4_DACLRC_DIR; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + aif1 |= WM8900_REG_AUDIO1_AIF_FMT_MASK; + aif1 &= ~WM8900_REG_AUDIO1_LRCLK_INV; + break; + case SND_SOC_DAIFMT_DSP_B: + aif1 |= WM8900_REG_AUDIO1_AIF_FMT_MASK; + aif1 |= WM8900_REG_AUDIO1_LRCLK_INV; + break; + case SND_SOC_DAIFMT_I2S: + aif1 &= ~WM8900_REG_AUDIO1_AIF_FMT_MASK; + aif1 |= 0x10; + break; + case SND_SOC_DAIFMT_RIGHT_J: + aif1 &= ~WM8900_REG_AUDIO1_AIF_FMT_MASK; + break; + case SND_SOC_DAIFMT_LEFT_J: + aif1 &= ~WM8900_REG_AUDIO1_AIF_FMT_MASK; + aif1 |= 0x8; + break; + default: + return -EINVAL; + } + + /* Clock inversion */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + /* frame inversion not valid for DSP modes */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + aif1 &= ~WM8900_REG_AUDIO1_BCLK_INV; + break; + case SND_SOC_DAIFMT_IB_NF: + aif1 |= WM8900_REG_AUDIO1_BCLK_INV; + break; + default: + return -EINVAL; + } + break; + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_RIGHT_J: + case SND_SOC_DAIFMT_LEFT_J: + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + aif1 &= ~WM8900_REG_AUDIO1_BCLK_INV; + aif1 &= ~WM8900_REG_AUDIO1_LRCLK_INV; + break; + case SND_SOC_DAIFMT_IB_IF: + aif1 |= WM8900_REG_AUDIO1_BCLK_INV; + aif1 |= WM8900_REG_AUDIO1_LRCLK_INV; + break; + case SND_SOC_DAIFMT_IB_NF: + aif1 |= WM8900_REG_AUDIO1_BCLK_INV; + aif1 &= ~WM8900_REG_AUDIO1_LRCLK_INV; + break; + case SND_SOC_DAIFMT_NB_IF: + aif1 &= ~WM8900_REG_AUDIO1_BCLK_INV; + aif1 |= WM8900_REG_AUDIO1_LRCLK_INV; + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + wm8900_write(codec, WM8900_REG_CLOCKING1, clocking1); + wm8900_write(codec, WM8900_REG_AUDIO1, aif1); + wm8900_write(codec, WM8900_REG_AUDIO3, aif3); + wm8900_write(codec, WM8900_REG_AUDIO4, aif4); + + return 0; +} + +static int wm8900_digital_mute(struct snd_soc_dai *codec_dai, int mute) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 reg; + + reg = wm8900_read(codec, WM8900_REG_DACCTRL); + + if (mute) + reg |= WM8900_REG_DACCTRL_MUTE; + else + reg &= ~WM8900_REG_DACCTRL_MUTE; + + wm8900_write(codec, WM8900_REG_DACCTRL, reg); + + return 0; +} + +#define WM8900_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000) + +#define WM8900_PCM_FORMATS \ + (SNDRV_PCM_FORMAT_S16_LE | SNDRV_PCM_FORMAT_S20_3LE | \ + SNDRV_PCM_FORMAT_S24_LE) + +struct snd_soc_dai wm8900_dai = { + .name = "WM8900 HiFi", + .playback = { + .stream_name = "HiFi Playback", + .channels_min = 1, + .channels_max = 2, + .rates = WM8900_RATES, + .formats = WM8900_PCM_FORMATS, + }, + .capture = { + .stream_name = "HiFi Capture", + .channels_min = 1, + .channels_max = 2, + .rates = WM8900_RATES, + .formats = WM8900_PCM_FORMATS, + }, + .ops = { + .hw_params = wm8900_hw_params, + }, + .dai_ops = { + .set_clkdiv = wm8900_set_dai_clkdiv, + .set_pll = wm8900_set_dai_pll, + .set_fmt = wm8900_set_dai_fmt, + .digital_mute = wm8900_digital_mute, + }, +}; +EXPORT_SYMBOL_GPL(wm8900_dai); + +static int wm8900_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + u16 reg; + + switch (level) { + case SND_SOC_BIAS_ON: + /* Enable thermal shutdown */ + reg = wm8900_read(codec, WM8900_REG_GPIO); + wm8900_write(codec, WM8900_REG_GPIO, + reg | WM8900_REG_GPIO_TEMP_ENA); + reg = wm8900_read(codec, WM8900_REG_ADDCTL); + wm8900_write(codec, WM8900_REG_ADDCTL, + reg | WM8900_REG_ADDCTL_TEMP_SD); + break; + + case SND_SOC_BIAS_PREPARE: + break; + + case SND_SOC_BIAS_STANDBY: + /* Charge capacitors if initial power up */ + if (codec->bias_level == SND_SOC_BIAS_OFF) { + /* STARTUP_BIAS_ENA on */ + wm8900_write(codec, WM8900_REG_POWER1, + WM8900_REG_POWER1_STARTUP_BIAS_ENA); + + /* Startup bias mode */ + wm8900_write(codec, WM8900_REG_ADDCTL, + WM8900_REG_ADDCTL_BIAS_SRC | + WM8900_REG_ADDCTL_VMID_SOFTST); + + /* VMID 2x50k */ + wm8900_write(codec, WM8900_REG_POWER1, + WM8900_REG_POWER1_STARTUP_BIAS_ENA | 0x1); + + /* Allow capacitors to charge */ + schedule_timeout_interruptible(msecs_to_jiffies(400)); + + /* Enable bias */ + wm8900_write(codec, WM8900_REG_POWER1, + WM8900_REG_POWER1_STARTUP_BIAS_ENA | + WM8900_REG_POWER1_BIAS_ENA | 0x1); + + wm8900_write(codec, WM8900_REG_ADDCTL, 0); + + wm8900_write(codec, WM8900_REG_POWER1, + WM8900_REG_POWER1_BIAS_ENA | 0x1); + } + + reg = wm8900_read(codec, WM8900_REG_POWER1); + wm8900_write(codec, WM8900_REG_POWER1, + (reg & WM8900_REG_POWER1_FLL_ENA) | + WM8900_REG_POWER1_BIAS_ENA | 0x1); + wm8900_write(codec, WM8900_REG_POWER2, + WM8900_REG_POWER2_SYSCLK_ENA); + wm8900_write(codec, WM8900_REG_POWER3, 0); + break; + + case SND_SOC_BIAS_OFF: + /* Startup bias enable */ + reg = wm8900_read(codec, WM8900_REG_POWER1); + wm8900_write(codec, WM8900_REG_POWER1, + reg & WM8900_REG_POWER1_STARTUP_BIAS_ENA); + wm8900_write(codec, WM8900_REG_ADDCTL, + WM8900_REG_ADDCTL_BIAS_SRC | + WM8900_REG_ADDCTL_VMID_SOFTST); + + /* Discharge caps */ + wm8900_write(codec, WM8900_REG_POWER1, + WM8900_REG_POWER1_STARTUP_BIAS_ENA); + schedule_timeout_interruptible(msecs_to_jiffies(500)); + + /* Remove clamp */ + wm8900_write(codec, WM8900_REG_HPCTL1, 0); + + /* Power down */ + wm8900_write(codec, WM8900_REG_ADDCTL, 0); + wm8900_write(codec, WM8900_REG_POWER1, 0); + wm8900_write(codec, WM8900_REG_POWER2, 0); + wm8900_write(codec, WM8900_REG_POWER3, 0); + + /* Need to let things settle before stopping the clock + * to ensure that restart works, see "Stopping the + * master clock" in the datasheet. */ + schedule_timeout_interruptible(msecs_to_jiffies(1)); + wm8900_write(codec, WM8900_REG_POWER2, + WM8900_REG_POWER2_SYSCLK_ENA); + break; + } + codec->bias_level = level; + return 0; +} + +static int wm8900_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + struct wm8900_priv *wm8900 = codec->private_data; + int fll_out = wm8900->fll_out; + int fll_in = wm8900->fll_in; + int ret; + + /* Stop the FLL in an orderly fashion */ + ret = wm8900_set_fll(codec, 0, 0, 0); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to stop FLL\n"); + return ret; + } + + wm8900->fll_out = fll_out; + wm8900->fll_in = fll_in; + + wm8900_set_bias_level(codec, SND_SOC_BIAS_OFF); + + return 0; +} + +static int wm8900_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + struct wm8900_priv *wm8900 = codec->private_data; + u16 *cache; + int i, ret; + + cache = kmemdup(codec->reg_cache, sizeof(wm8900_reg_defaults), + GFP_KERNEL); + + wm8900_reset(codec); + wm8900_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + /* Restart the FLL? */ + if (wm8900->fll_out) { + int fll_out = wm8900->fll_out; + int fll_in = wm8900->fll_in; + + wm8900->fll_in = 0; + wm8900->fll_out = 0; + + ret = wm8900_set_fll(codec, 0, fll_in, fll_out); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to restart FLL\n"); + return ret; + } + } + + if (cache) { + for (i = 0; i < WM8900_MAXREG; i++) + wm8900_write(codec, i, cache[i]); + kfree(cache); + } else + dev_err(&pdev->dev, "Unable to allocate register cache\n"); + + return 0; +} + +/* + * initialise the WM8900 driver + * register the mixer and dsp interfaces with the kernel + */ +static int wm8900_init(struct snd_soc_device *socdev) +{ + struct snd_soc_codec *codec = socdev->codec; + int ret = 0; + unsigned int reg; + struct i2c_client *i2c_client = socdev->codec->control_data; + + codec->name = "WM8900"; + codec->owner = THIS_MODULE; + codec->read = wm8900_read; + codec->write = wm8900_write; + codec->dai = &wm8900_dai; + codec->num_dai = 1; + codec->reg_cache_size = WM8900_MAXREG; + codec->reg_cache = kmemdup(wm8900_reg_defaults, + sizeof(wm8900_reg_defaults), GFP_KERNEL); + + if (codec->reg_cache == NULL) + return -ENOMEM; + + reg = wm8900_read(codec, WM8900_REG_ID); + if (reg != 0x8900) { + dev_err(&i2c_client->dev, "Device is not a WM8900 - ID %x\n", + reg); + return -ENODEV; + } + + codec->private_data = kzalloc(sizeof(struct wm8900_priv), GFP_KERNEL); + if (codec->private_data == NULL) { + ret = -ENOMEM; + goto priv_err; + } + + /* Read back from the chip */ + reg = wm8900_chip_read(codec, WM8900_REG_POWER1); + reg = (reg >> 12) & 0xf; + dev_info(&i2c_client->dev, "WM8900 revision %d\n", reg); + + wm8900_reset(codec); + + /* Latch the volume update bits */ + wm8900_write(codec, WM8900_REG_LINVOL, + wm8900_read(codec, WM8900_REG_LINVOL) | 0x100); + wm8900_write(codec, WM8900_REG_RINVOL, + wm8900_read(codec, WM8900_REG_RINVOL) | 0x100); + wm8900_write(codec, WM8900_REG_LOUT1CTL, + wm8900_read(codec, WM8900_REG_LOUT1CTL) | 0x100); + wm8900_write(codec, WM8900_REG_ROUT1CTL, + wm8900_read(codec, WM8900_REG_ROUT1CTL) | 0x100); + wm8900_write(codec, WM8900_REG_LOUT2CTL, + wm8900_read(codec, WM8900_REG_LOUT2CTL) | 0x100); + wm8900_write(codec, WM8900_REG_ROUT2CTL, + wm8900_read(codec, WM8900_REG_ROUT2CTL) | 0x100); + wm8900_write(codec, WM8900_REG_LDAC_DV, + wm8900_read(codec, WM8900_REG_LDAC_DV) | 0x100); + wm8900_write(codec, WM8900_REG_RDAC_DV, + wm8900_read(codec, WM8900_REG_RDAC_DV) | 0x100); + wm8900_write(codec, WM8900_REG_LADC_DV, + wm8900_read(codec, WM8900_REG_LADC_DV) | 0x100); + wm8900_write(codec, WM8900_REG_RADC_DV, + wm8900_read(codec, WM8900_REG_RADC_DV) | 0x100); + + /* Set the DAC and mixer output bias */ + wm8900_write(codec, WM8900_REG_OUTBIASCTL, 0x81); + + /* Register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(&i2c_client->dev, "Failed to register new PCMs\n"); + goto pcm_err; + } + + /* Turn the chip on */ + codec->bias_level = SND_SOC_BIAS_OFF; + wm8900_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + wm8900_add_controls(codec); + wm8900_add_widgets(codec); + + ret = snd_soc_register_card(socdev); + if (ret < 0) { + dev_err(&i2c_client->dev, "Failed to register card\n"); + goto card_err; + } + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + kfree(codec->reg_cache); +priv_err: + kfree(codec->private_data); + return ret; +} + +static struct snd_soc_device *wm8900_socdev; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + +static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; + +/* Magic definition of all other variables and things */ +I2C_CLIENT_INSMOD; + +static struct i2c_driver wm8900_i2c_driver; +static struct i2c_client client_template; + +/* If the i2c layer weren't so broken, we could pass this kind of data + around */ +static int wm8900_codec_probe(struct i2c_adapter *adap, int addr, int kind) +{ + struct snd_soc_device *socdev = wm8900_socdev; + struct wm8900_setup_data *setup = socdev->codec_data; + struct snd_soc_codec *codec = socdev->codec; + struct i2c_client *i2c; + int ret; + + if (addr != setup->i2c_address) + return -ENODEV; + + dev_err(&adap->dev, "Probe on %x\n", addr); + + client_template.adapter = adap; + client_template.addr = addr; + + i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); + if (i2c == NULL) { + kfree(codec); + return -ENOMEM; + } + i2c_set_clientdata(i2c, codec); + codec->control_data = i2c; + + ret = i2c_attach_client(i2c); + if (ret < 0) { + dev_err(&adap->dev, + "failed to attach codec at addr %x\n", addr); + goto err; + } + + ret = wm8900_init(socdev); + if (ret < 0) { + dev_err(&adap->dev, "failed to initialise WM8900\n"); + goto err; + } + return ret; + +err: + kfree(codec); + kfree(i2c); + return ret; +} + +static int wm8900_i2c_detach(struct i2c_client *client) +{ + struct snd_soc_codec *codec = i2c_get_clientdata(client); + i2c_detach_client(client); + kfree(codec->reg_cache); + kfree(client); + return 0; +} + +static int wm8900_i2c_attach(struct i2c_adapter *adap) +{ + return i2c_probe(adap, &addr_data, wm8900_codec_probe); +} + +/* corgi i2c codec control layer */ +static struct i2c_driver wm8900_i2c_driver = { + .driver = { + .name = "WM8900 I2C codec", + .owner = THIS_MODULE, + }, + .attach_adapter = wm8900_i2c_attach, + .detach_client = wm8900_i2c_detach, + .command = NULL, +}; + +static struct i2c_client client_template = { + .name = "WM8900", + .driver = &wm8900_i2c_driver, +}; +#endif + +static int wm8900_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct wm8900_setup_data *setup; + struct snd_soc_codec *codec; + int ret = 0; + + dev_info(&pdev->dev, "WM8900 Audio Codec\n"); + + setup = socdev->codec_data; + codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (codec == NULL) + return -ENOMEM; + + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + socdev->codec = codec; + + codec->set_bias_level = wm8900_set_bias_level; + + wm8900_socdev = socdev; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + if (setup->i2c_address) { + normal_i2c[0] = setup->i2c_address; + codec->hw_write = (hw_write_t)i2c_master_send; + ret = i2c_add_driver(&wm8900_i2c_driver); + if (ret != 0) + printk(KERN_ERR "can't add i2c driver"); + } +#else +#error Non-I2C interfaces not yet supported +#endif + return ret; +} + +/* power down chip */ +static int wm8900_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + if (codec->control_data) + wm8900_set_bias_level(codec, SND_SOC_BIAS_OFF); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&wm8900_i2c_driver); +#endif + kfree(codec); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm8900 = { + .probe = wm8900_probe, + .remove = wm8900_remove, + .suspend = wm8900_suspend, + .resume = wm8900_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm8900); + +MODULE_DESCRIPTION("ASoC WM8900 driver"); +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfonmicro.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8900.h b/sound/soc/codecs/wm8900.h new file mode 100644 index 00000000000..ba450d99e90 --- /dev/null +++ b/sound/soc/codecs/wm8900.h @@ -0,0 +1,64 @@ +/* + * wm8900.h -- WM890 Soc Audio driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _WM8900_H +#define _WM8900_H + +#define WM8900_FLL 1 + +#define WM8900_BCLK_DIV 1 +#define WM8900_ADC_CLKDIV 2 +#define WM8900_DAC_CLKDIV 3 +#define WM8900_ADC_LRCLK 4 +#define WM8900_DAC_LRCLK 5 +#define WM8900_OPCLK_DIV 6 +#define WM8900_LRCLK_MODE 7 + +#define WM8900_BCLK_DIV_1 0x00 +#define WM8900_BCLK_DIV_1_5 0x02 +#define WM8900_BCLK_DIV_2 0x04 +#define WM8900_BCLK_DIV_3 0x06 +#define WM8900_BCLK_DIV_4 0x08 +#define WM8900_BCLK_DIV_5_5 0x0a +#define WM8900_BCLK_DIV_6 0x0c +#define WM8900_BCLK_DIV_8 0x0e +#define WM8900_BCLK_DIV_11 0x10 +#define WM8900_BCLK_DIV_12 0x12 +#define WM8900_BCLK_DIV_16 0x14 +#define WM8900_BCLK_DIV_22 0x16 +#define WM8900_BCLK_DIV_24 0x18 +#define WM8900_BCLK_DIV_32 0x1a +#define WM8900_BCLK_DIV_44 0x1c +#define WM8900_BCLK_DIV_48 0x1e + +#define WM8900_ADC_CLKDIV_1 0x00 +#define WM8900_ADC_CLKDIV_1_5 0x20 +#define WM8900_ADC_CLKDIV_2 0x40 +#define WM8900_ADC_CLKDIV_3 0x60 +#define WM8900_ADC_CLKDIV_4 0x80 +#define WM8900_ADC_CLKDIV_5_5 0xa0 +#define WM8900_ADC_CLKDIV_6 0xc0 + +#define WM8900_DAC_CLKDIV_1 0x00 +#define WM8900_DAC_CLKDIV_1_5 0x04 +#define WM8900_DAC_CLKDIV_2 0x08 +#define WM8900_DAC_CLKDIV_3 0x0c +#define WM8900_DAC_CLKDIV_4 0x10 +#define WM8900_DAC_CLKDIV_5_5 0x14 +#define WM8900_DAC_CLKDIV_6 0x18 + +#define WM8900_ + +struct wm8900_setup_data { + unsigned short i2c_address; +}; + +extern struct snd_soc_dai wm8900_dai; +extern struct snd_soc_codec_device soc_codec_dev_wm8900; + +#endif diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c new file mode 100644 index 00000000000..a3f54ec4226 --- /dev/null +++ b/sound/soc/codecs/wm8903.c @@ -0,0 +1,1813 @@ +/* + * wm8903.c -- WM8903 ALSA SoC Audio driver + * + * Copyright 2008 Wolfson Microelectronics + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * TODO: + * - TDM mode configuration. + * - Mic detect. + * - Digital microphone support. + * - Interrupt support (mic detect and sequencer). + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/tlv.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> + +#include "wm8903.h" + +struct wm8903_priv { + int sysclk; + + /* Reference counts */ + int charge_pump_users; + int class_w_users; + int playback_active; + int capture_active; + + struct snd_pcm_substream *master_substream; + struct snd_pcm_substream *slave_substream; +}; + +/* Register defaults at reset */ +static u16 wm8903_reg_defaults[] = { + 0x8903, /* R0 - SW Reset and ID */ + 0x0000, /* R1 - Revision Number */ + 0x0000, /* R2 */ + 0x0000, /* R3 */ + 0x0018, /* R4 - Bias Control 0 */ + 0x0000, /* R5 - VMID Control 0 */ + 0x0000, /* R6 - Mic Bias Control 0 */ + 0x0000, /* R7 */ + 0x0001, /* R8 - Analogue DAC 0 */ + 0x0000, /* R9 */ + 0x0001, /* R10 - Analogue ADC 0 */ + 0x0000, /* R11 */ + 0x0000, /* R12 - Power Management 0 */ + 0x0000, /* R13 - Power Management 1 */ + 0x0000, /* R14 - Power Management 2 */ + 0x0000, /* R15 - Power Management 3 */ + 0x0000, /* R16 - Power Management 4 */ + 0x0000, /* R17 - Power Management 5 */ + 0x0000, /* R18 - Power Management 6 */ + 0x0000, /* R19 */ + 0x0400, /* R20 - Clock Rates 0 */ + 0x0D07, /* R21 - Clock Rates 1 */ + 0x0000, /* R22 - Clock Rates 2 */ + 0x0000, /* R23 */ + 0x0050, /* R24 - Audio Interface 0 */ + 0x0242, /* R25 - Audio Interface 1 */ + 0x0008, /* R26 - Audio Interface 2 */ + 0x0022, /* R27 - Audio Interface 3 */ + 0x0000, /* R28 */ + 0x0000, /* R29 */ + 0x00C0, /* R30 - DAC Digital Volume Left */ + 0x00C0, /* R31 - DAC Digital Volume Right */ + 0x0000, /* R32 - DAC Digital 0 */ + 0x0000, /* R33 - DAC Digital 1 */ + 0x0000, /* R34 */ + 0x0000, /* R35 */ + 0x00C0, /* R36 - ADC Digital Volume Left */ + 0x00C0, /* R37 - ADC Digital Volume Right */ + 0x0000, /* R38 - ADC Digital 0 */ + 0x0073, /* R39 - Digital Microphone 0 */ + 0x09BF, /* R40 - DRC 0 */ + 0x3241, /* R41 - DRC 1 */ + 0x0020, /* R42 - DRC 2 */ + 0x0000, /* R43 - DRC 3 */ + 0x0085, /* R44 - Analogue Left Input 0 */ + 0x0085, /* R45 - Analogue Right Input 0 */ + 0x0044, /* R46 - Analogue Left Input 1 */ + 0x0044, /* R47 - Analogue Right Input 1 */ + 0x0000, /* R48 */ + 0x0000, /* R49 */ + 0x0008, /* R50 - Analogue Left Mix 0 */ + 0x0004, /* R51 - Analogue Right Mix 0 */ + 0x0000, /* R52 - Analogue Spk Mix Left 0 */ + 0x0000, /* R53 - Analogue Spk Mix Left 1 */ + 0x0000, /* R54 - Analogue Spk Mix Right 0 */ + 0x0000, /* R55 - Analogue Spk Mix Right 1 */ + 0x0000, /* R56 */ + 0x002D, /* R57 - Analogue OUT1 Left */ + 0x002D, /* R58 - Analogue OUT1 Right */ + 0x0039, /* R59 - Analogue OUT2 Left */ + 0x0039, /* R60 - Analogue OUT2 Right */ + 0x0100, /* R61 */ + 0x0139, /* R62 - Analogue OUT3 Left */ + 0x0139, /* R63 - Analogue OUT3 Right */ + 0x0000, /* R64 */ + 0x0000, /* R65 - Analogue SPK Output Control 0 */ + 0x0000, /* R66 */ + 0x0010, /* R67 - DC Servo 0 */ + 0x0100, /* R68 */ + 0x00A4, /* R69 - DC Servo 2 */ + 0x0807, /* R70 */ + 0x0000, /* R71 */ + 0x0000, /* R72 */ + 0x0000, /* R73 */ + 0x0000, /* R74 */ + 0x0000, /* R75 */ + 0x0000, /* R76 */ + 0x0000, /* R77 */ + 0x0000, /* R78 */ + 0x000E, /* R79 */ + 0x0000, /* R80 */ + 0x0000, /* R81 */ + 0x0000, /* R82 */ + 0x0000, /* R83 */ + 0x0000, /* R84 */ + 0x0000, /* R85 */ + 0x0000, /* R86 */ + 0x0006, /* R87 */ + 0x0000, /* R88 */ + 0x0000, /* R89 */ + 0x0000, /* R90 - Analogue HP 0 */ + 0x0060, /* R91 */ + 0x0000, /* R92 */ + 0x0000, /* R93 */ + 0x0000, /* R94 - Analogue Lineout 0 */ + 0x0060, /* R95 */ + 0x0000, /* R96 */ + 0x0000, /* R97 */ + 0x0000, /* R98 - Charge Pump 0 */ + 0x1F25, /* R99 */ + 0x2B19, /* R100 */ + 0x01C0, /* R101 */ + 0x01EF, /* R102 */ + 0x2B00, /* R103 */ + 0x0000, /* R104 - Class W 0 */ + 0x01C0, /* R105 */ + 0x1C10, /* R106 */ + 0x0000, /* R107 */ + 0x0000, /* R108 - Write Sequencer 0 */ + 0x0000, /* R109 - Write Sequencer 1 */ + 0x0000, /* R110 - Write Sequencer 2 */ + 0x0000, /* R111 - Write Sequencer 3 */ + 0x0000, /* R112 - Write Sequencer 4 */ + 0x0000, /* R113 */ + 0x0000, /* R114 - Control Interface */ + 0x0000, /* R115 */ + 0x00A8, /* R116 - GPIO Control 1 */ + 0x00A8, /* R117 - GPIO Control 2 */ + 0x00A8, /* R118 - GPIO Control 3 */ + 0x0220, /* R119 - GPIO Control 4 */ + 0x01A0, /* R120 - GPIO Control 5 */ + 0x0000, /* R121 - Interrupt Status 1 */ + 0xFFFF, /* R122 - Interrupt Status 1 Mask */ + 0x0000, /* R123 - Interrupt Polarity 1 */ + 0x0000, /* R124 */ + 0x0003, /* R125 */ + 0x0000, /* R126 - Interrupt Control */ + 0x0000, /* R127 */ + 0x0005, /* R128 */ + 0x0000, /* R129 - Control Interface Test 1 */ + 0x0000, /* R130 */ + 0x0000, /* R131 */ + 0x0000, /* R132 */ + 0x0000, /* R133 */ + 0x0000, /* R134 */ + 0x03FF, /* R135 */ + 0x0007, /* R136 */ + 0x0040, /* R137 */ + 0x0000, /* R138 */ + 0x0000, /* R139 */ + 0x0000, /* R140 */ + 0x0000, /* R141 */ + 0x0000, /* R142 */ + 0x0000, /* R143 */ + 0x0000, /* R144 */ + 0x0000, /* R145 */ + 0x0000, /* R146 */ + 0x0000, /* R147 */ + 0x4000, /* R148 */ + 0x6810, /* R149 - Charge Pump Test 1 */ + 0x0004, /* R150 */ + 0x0000, /* R151 */ + 0x0000, /* R152 */ + 0x0000, /* R153 */ + 0x0000, /* R154 */ + 0x0000, /* R155 */ + 0x0000, /* R156 */ + 0x0000, /* R157 */ + 0x0000, /* R158 */ + 0x0000, /* R159 */ + 0x0000, /* R160 */ + 0x0000, /* R161 */ + 0x0000, /* R162 */ + 0x0000, /* R163 */ + 0x0028, /* R164 - Clock Rate Test 4 */ + 0x0004, /* R165 */ + 0x0000, /* R166 */ + 0x0060, /* R167 */ + 0x0000, /* R168 */ + 0x0000, /* R169 */ + 0x0000, /* R170 */ + 0x0000, /* R171 */ + 0x0000, /* R172 - Analogue Output Bias 0 */ +}; + +static unsigned int wm8903_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + + BUG_ON(reg >= ARRAY_SIZE(wm8903_reg_defaults)); + + return cache[reg]; +} + +static unsigned int wm8903_hw_read(struct snd_soc_codec *codec, u8 reg) +{ + struct i2c_msg xfer[2]; + u16 data; + int ret; + struct i2c_client *client = codec->control_data; + + /* Write register */ + xfer[0].addr = client->addr; + xfer[0].flags = 0; + xfer[0].len = 1; + xfer[0].buf = ® + + /* Read data */ + xfer[1].addr = client->addr; + xfer[1].flags = I2C_M_RD; + xfer[1].len = 2; + xfer[1].buf = (u8 *)&data; + + ret = i2c_transfer(client->adapter, xfer, 2); + if (ret != 2) { + pr_err("i2c_transfer returned %d\n", ret); + return 0; + } + + return (data >> 8) | ((data & 0xff) << 8); +} + +static unsigned int wm8903_read(struct snd_soc_codec *codec, + unsigned int reg) +{ + switch (reg) { + case WM8903_SW_RESET_AND_ID: + case WM8903_REVISION_NUMBER: + case WM8903_INTERRUPT_STATUS_1: + case WM8903_WRITE_SEQUENCER_4: + return wm8903_hw_read(codec, reg); + + default: + return wm8903_read_reg_cache(codec, reg); + } +} + +static void wm8903_write_reg_cache(struct snd_soc_codec *codec, + u16 reg, unsigned int value) +{ + u16 *cache = codec->reg_cache; + + BUG_ON(reg >= ARRAY_SIZE(wm8903_reg_defaults)); + + switch (reg) { + case WM8903_SW_RESET_AND_ID: + case WM8903_REVISION_NUMBER: + break; + + default: + cache[reg] = value; + break; + } +} + +static int wm8903_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 data[3]; + + wm8903_write_reg_cache(codec, reg, value); + + /* Data format is 1 byte of address followed by 2 bytes of data */ + data[0] = reg; + data[1] = (value >> 8) & 0xff; + data[2] = value & 0xff; + + if (codec->hw_write(codec->control_data, data, 3) == 2) + return 0; + else + return -EIO; +} + +static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start) +{ + u16 reg[5]; + struct i2c_client *i2c = codec->control_data; + + BUG_ON(start > 48); + + /* Enable the sequencer */ + reg[0] = wm8903_read(codec, WM8903_WRITE_SEQUENCER_0); + reg[0] |= WM8903_WSEQ_ENA; + wm8903_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]); + + dev_dbg(&i2c->dev, "Starting sequence at %d\n", start); + + wm8903_write(codec, WM8903_WRITE_SEQUENCER_3, + start | WM8903_WSEQ_START); + + /* Wait for it to complete. If we have the interrupt wired up then + * we could block waiting for an interrupt, though polling may still + * be desirable for diagnostic purposes. + */ + do { + msleep(10); + + reg[4] = wm8903_read(codec, WM8903_WRITE_SEQUENCER_4); + } while (reg[4] & WM8903_WSEQ_BUSY); + + dev_dbg(&i2c->dev, "Sequence complete\n"); + + /* Disable the sequencer again */ + wm8903_write(codec, WM8903_WRITE_SEQUENCER_0, + reg[0] & ~WM8903_WSEQ_ENA); + + return 0; +} + +static void wm8903_sync_reg_cache(struct snd_soc_codec *codec, u16 *cache) +{ + int i; + + /* There really ought to be something better we can do here :/ */ + for (i = 0; i < ARRAY_SIZE(wm8903_reg_defaults); i++) + cache[i] = wm8903_hw_read(codec, i); +} + +static void wm8903_reset(struct snd_soc_codec *codec) +{ + wm8903_write(codec, WM8903_SW_RESET_AND_ID, 0); +} + +#define WM8903_OUTPUT_SHORT 0x8 +#define WM8903_OUTPUT_OUT 0x4 +#define WM8903_OUTPUT_INT 0x2 +#define WM8903_OUTPUT_IN 0x1 + +/* + * Event for headphone and line out amplifier power changes. Special + * power up/down sequences are required in order to maximise pop/click + * performance. + */ +static int wm8903_output_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm8903_priv *wm8903 = codec->private_data; + struct i2c_client *i2c = codec->control_data; + u16 val; + u16 reg; + int shift; + u16 cp_reg = wm8903_read(codec, WM8903_CHARGE_PUMP_0); + + switch (w->reg) { + case WM8903_POWER_MANAGEMENT_2: + reg = WM8903_ANALOGUE_HP_0; + break; + case WM8903_POWER_MANAGEMENT_3: + reg = WM8903_ANALOGUE_LINEOUT_0; + break; + default: + BUG(); + } + + switch (w->shift) { + case 0: + shift = 0; + break; + case 1: + shift = 4; + break; + default: + BUG(); + } + + if (event & SND_SOC_DAPM_PRE_PMU) { + val = wm8903_read(codec, reg); + + /* Short the output */ + val &= ~(WM8903_OUTPUT_SHORT << shift); + wm8903_write(codec, reg, val); + + wm8903->charge_pump_users++; + + dev_dbg(&i2c->dev, "Charge pump use count now %d\n", + wm8903->charge_pump_users); + + if (wm8903->charge_pump_users == 1) { + dev_dbg(&i2c->dev, "Enabling charge pump\n"); + wm8903_write(codec, WM8903_CHARGE_PUMP_0, + cp_reg | WM8903_CP_ENA); + mdelay(4); + } + } + + if (event & SND_SOC_DAPM_POST_PMU) { + val = wm8903_read(codec, reg); + + val |= (WM8903_OUTPUT_IN << shift); + wm8903_write(codec, reg, val); + + val |= (WM8903_OUTPUT_INT << shift); + wm8903_write(codec, reg, val); + + /* Turn on the output ENA_OUTP */ + val |= (WM8903_OUTPUT_OUT << shift); + wm8903_write(codec, reg, val); + + /* Remove the short */ + val |= (WM8903_OUTPUT_SHORT << shift); + wm8903_write(codec, reg, val); + } + + if (event & SND_SOC_DAPM_PRE_PMD) { + val = wm8903_read(codec, reg); + + /* Short the output */ + val &= ~(WM8903_OUTPUT_SHORT << shift); + wm8903_write(codec, reg, val); + + /* Then disable the intermediate and output stages */ + val &= ~((WM8903_OUTPUT_OUT | WM8903_OUTPUT_INT | + WM8903_OUTPUT_IN) << shift); + wm8903_write(codec, reg, val); + } + + if (event & SND_SOC_DAPM_POST_PMD) { + wm8903->charge_pump_users--; + + dev_dbg(&i2c->dev, "Charge pump use count now %d\n", + wm8903->charge_pump_users); + + if (wm8903->charge_pump_users == 0) { + dev_dbg(&i2c->dev, "Disabling charge pump\n"); + wm8903_write(codec, WM8903_CHARGE_PUMP_0, + cp_reg & ~WM8903_CP_ENA); + } + } + + return 0; +} + +/* + * When used with DAC outputs only the WM8903 charge pump supports + * operation in class W mode, providing very low power consumption + * when used with digital sources. Enable and disable this mode + * automatically depending on the mixer configuration. + * + * All the relevant controls are simple switches. + */ +static int wm8903_class_w_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol); + struct snd_soc_codec *codec = widget->codec; + struct wm8903_priv *wm8903 = codec->private_data; + struct i2c_client *i2c = codec->control_data; + u16 reg; + int ret; + + reg = wm8903_read(codec, WM8903_CLASS_W_0); + + /* Turn it off if we're about to enable bypass */ + if (ucontrol->value.integer.value[0]) { + if (wm8903->class_w_users == 0) { + dev_dbg(&i2c->dev, "Disabling Class W\n"); + wm8903_write(codec, WM8903_CLASS_W_0, reg & + ~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V)); + } + wm8903->class_w_users++; + } + + /* Implement the change */ + ret = snd_soc_dapm_put_volsw(kcontrol, ucontrol); + + /* If we've just disabled the last bypass path turn Class W on */ + if (!ucontrol->value.integer.value[0]) { + if (wm8903->class_w_users == 1) { + dev_dbg(&i2c->dev, "Enabling Class W\n"); + wm8903_write(codec, WM8903_CLASS_W_0, reg | + WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V); + } + wm8903->class_w_users--; + } + + dev_dbg(&i2c->dev, "Bypass use count now %d\n", + wm8903->class_w_users); + + return ret; +} + +#define SOC_DAPM_SINGLE_W(xname, reg, shift, max, invert) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_info_volsw, \ + .get = snd_soc_dapm_get_volsw, .put = wm8903_class_w_put, \ + .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) } + + +/* ALSA can only do steps of .01dB */ +static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1); + +static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); + +static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0); +static const DECLARE_TLV_DB_SCALE(drc_tlv_amp, -2250, 75, 0); +static const DECLARE_TLV_DB_SCALE(drc_tlv_min, 0, 600, 0); +static const DECLARE_TLV_DB_SCALE(drc_tlv_max, 1200, 600, 0); +static const DECLARE_TLV_DB_SCALE(drc_tlv_startup, -300, 50, 0); + +static const char *drc_slope_text[] = { + "1", "1/2", "1/4", "1/8", "1/16", "0" +}; + +static const struct soc_enum drc_slope_r0 = + SOC_ENUM_SINGLE(WM8903_DRC_2, 3, 6, drc_slope_text); + +static const struct soc_enum drc_slope_r1 = + SOC_ENUM_SINGLE(WM8903_DRC_2, 0, 6, drc_slope_text); + +static const char *drc_attack_text[] = { + "instantaneous", + "363us", "762us", "1.45ms", "2.9ms", "5.8ms", "11.6ms", "23.2ms", + "46.4ms", "92.8ms", "185.6ms" +}; + +static const struct soc_enum drc_attack = + SOC_ENUM_SINGLE(WM8903_DRC_1, 12, 11, drc_attack_text); + +static const char *drc_decay_text[] = { + "186ms", "372ms", "743ms", "1.49s", "2.97s", "5.94s", "11.89s", + "23.87s", "47.56s" +}; + +static const struct soc_enum drc_decay = + SOC_ENUM_SINGLE(WM8903_DRC_1, 8, 9, drc_decay_text); + +static const char *drc_ff_delay_text[] = { + "5 samples", "9 samples" +}; + +static const struct soc_enum drc_ff_delay = + SOC_ENUM_SINGLE(WM8903_DRC_0, 5, 2, drc_ff_delay_text); + +static const char *drc_qr_decay_text[] = { + "0.725ms", "1.45ms", "5.8ms" +}; + +static const struct soc_enum drc_qr_decay = + SOC_ENUM_SINGLE(WM8903_DRC_1, 4, 3, drc_qr_decay_text); + +static const char *drc_smoothing_text[] = { + "Low", "Medium", "High" +}; + +static const struct soc_enum drc_smoothing = + SOC_ENUM_SINGLE(WM8903_DRC_0, 11, 3, drc_smoothing_text); + +static const char *soft_mute_text[] = { + "Fast (fs/2)", "Slow (fs/32)" +}; + +static const struct soc_enum soft_mute = + SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 10, 2, soft_mute_text); + +static const char *mute_mode_text[] = { + "Hard", "Soft" +}; + +static const struct soc_enum mute_mode = + SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 9, 2, mute_mode_text); + +static const char *dac_deemphasis_text[] = { + "Disabled", "32kHz", "44.1kHz", "48kHz" +}; + +static const struct soc_enum dac_deemphasis = + SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 1, 4, dac_deemphasis_text); + +static const char *companding_text[] = { + "ulaw", "alaw" +}; + +static const struct soc_enum dac_companding = + SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 0, 2, companding_text); + +static const struct soc_enum adc_companding = + SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 2, 2, companding_text); + +static const char *input_mode_text[] = { + "Single-Ended", "Differential Line", "Differential Mic" +}; + +static const struct soc_enum linput_mode_enum = + SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 0, 3, input_mode_text); + +static const struct soc_enum rinput_mode_enum = + SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 0, 3, input_mode_text); + +static const char *linput_mux_text[] = { + "IN1L", "IN2L", "IN3L" +}; + +static const struct soc_enum linput_enum = + SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 2, 3, linput_mux_text); + +static const struct soc_enum linput_inv_enum = + SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 4, 3, linput_mux_text); + +static const char *rinput_mux_text[] = { + "IN1R", "IN2R", "IN3R" +}; + +static const struct soc_enum rinput_enum = + SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 2, 3, rinput_mux_text); + +static const struct soc_enum rinput_inv_enum = + SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 4, 3, rinput_mux_text); + + +static const struct snd_kcontrol_new wm8903_snd_controls[] = { + +/* Input PGAs - No TLV since the scale depends on PGA mode */ +SOC_SINGLE("Left Input PGA Switch", WM8903_ANALOGUE_LEFT_INPUT_0, + 7, 1, 0), +SOC_SINGLE("Left Input PGA Volume", WM8903_ANALOGUE_LEFT_INPUT_0, + 0, 31, 0), +SOC_SINGLE("Left Input PGA Common Mode Switch", WM8903_ANALOGUE_LEFT_INPUT_1, + 6, 1, 0), + +SOC_SINGLE("Right Input PGA Switch", WM8903_ANALOGUE_RIGHT_INPUT_0, + 7, 1, 0), +SOC_SINGLE("Right Input PGA Volume", WM8903_ANALOGUE_RIGHT_INPUT_0, + 0, 31, 0), +SOC_SINGLE("Right Input PGA Common Mode Switch", WM8903_ANALOGUE_RIGHT_INPUT_1, + 6, 1, 0), + +/* ADCs */ +SOC_SINGLE("DRC Switch", WM8903_DRC_0, 15, 1, 0), +SOC_ENUM("DRC Compressor Slope R0", drc_slope_r0), +SOC_ENUM("DRC Compressor Slope R1", drc_slope_r1), +SOC_SINGLE_TLV("DRC Compressor Threashold Volume", WM8903_DRC_3, 5, 124, 1, + drc_tlv_thresh), +SOC_SINGLE_TLV("DRC Volume", WM8903_DRC_3, 0, 30, 1, drc_tlv_amp), +SOC_SINGLE_TLV("DRC Minimum Gain Volume", WM8903_DRC_1, 2, 3, 1, drc_tlv_min), +SOC_SINGLE_TLV("DRC Maximum Gain Volume", WM8903_DRC_1, 0, 3, 0, drc_tlv_max), +SOC_ENUM("DRC Attack Rate", drc_attack), +SOC_ENUM("DRC Decay Rate", drc_decay), +SOC_ENUM("DRC FF Delay", drc_ff_delay), +SOC_SINGLE("DRC Anticlip Switch", WM8903_DRC_0, 1, 1, 0), +SOC_SINGLE("DRC QR Switch", WM8903_DRC_0, 2, 1, 0), +SOC_SINGLE_TLV("DRC QR Threashold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max), +SOC_ENUM("DRC QR Decay Rate", drc_qr_decay), +SOC_SINGLE("DRC Smoothing Switch", WM8903_DRC_0, 3, 1, 0), +SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8903_DRC_0, 0, 1, 0), +SOC_ENUM("DRC Smoothing Threashold", drc_smoothing), +SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup), + +SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT, + WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 96, 0, digital_tlv), +SOC_ENUM("ADC Companding Mode", adc_companding), +SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0), + +/* DAC */ +SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT, + WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv), +SOC_ENUM("DAC Soft Mute Rate", soft_mute), +SOC_ENUM("DAC Mute Mode", mute_mode), +SOC_SINGLE("DAC Mono Switch", WM8903_DAC_DIGITAL_1, 12, 1, 0), +SOC_ENUM("DAC De-emphasis", dac_deemphasis), +SOC_SINGLE("DAC Sloping Stopband Filter Switch", + WM8903_DAC_DIGITAL_1, 11, 1, 0), +SOC_ENUM("DAC Companding Mode", dac_companding), +SOC_SINGLE("DAC Companding Switch", WM8903_AUDIO_INTERFACE_0, 1, 1, 0), + +/* Headphones */ +SOC_DOUBLE_R("Headphone Switch", + WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, + 8, 1, 1), +SOC_DOUBLE_R("Headphone ZC Switch", + WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, + 6, 1, 0), +SOC_DOUBLE_R_TLV("Headphone Volume", + WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, + 0, 63, 0, out_tlv), + +/* Line out */ +SOC_DOUBLE_R("Line Out Switch", + WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, + 8, 1, 1), +SOC_DOUBLE_R("Line Out ZC Switch", + WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, + 6, 1, 0), +SOC_DOUBLE_R_TLV("Line Out Volume", + WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, + 0, 63, 0, out_tlv), + +/* Speaker */ +SOC_DOUBLE_R("Speaker Switch", + WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 8, 1, 1), +SOC_DOUBLE_R("Speaker ZC Switch", + WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 6, 1, 0), +SOC_DOUBLE_R_TLV("Speaker Volume", + WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, + 0, 63, 0, out_tlv), +}; + +static int wm8903_add_controls(struct snd_soc_codec *codec) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(wm8903_snd_controls); i++) { + err = snd_ctl_add(codec->card, + snd_soc_cnew(&wm8903_snd_controls[i], + codec, NULL)); + if (err < 0) + return err; + } + + return 0; +} + +static const struct snd_kcontrol_new linput_mode_mux = + SOC_DAPM_ENUM("Left Input Mode Mux", linput_mode_enum); + +static const struct snd_kcontrol_new rinput_mode_mux = + SOC_DAPM_ENUM("Right Input Mode Mux", rinput_mode_enum); + +static const struct snd_kcontrol_new linput_mux = + SOC_DAPM_ENUM("Left Input Mux", linput_enum); + +static const struct snd_kcontrol_new linput_inv_mux = + SOC_DAPM_ENUM("Left Inverting Input Mux", linput_inv_enum); + +static const struct snd_kcontrol_new rinput_mux = + SOC_DAPM_ENUM("Right Input Mux", rinput_enum); + +static const struct snd_kcontrol_new rinput_inv_mux = + SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum); + +static const struct snd_kcontrol_new left_output_mixer[] = { +SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0), +SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0), +SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0), +SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0), +}; + +static const struct snd_kcontrol_new right_output_mixer[] = { +SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 3, 1, 0), +SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 2, 1, 0), +SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0), +SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0), +}; + +static const struct snd_kcontrol_new left_speaker_mixer[] = { +SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 3, 1, 0), +SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 2, 1, 0), +SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 1, 1, 0), +SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, + 1, 1, 0), +}; + +static const struct snd_kcontrol_new right_speaker_mixer[] = { +SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 3, 1, 0), +SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 2, 1, 0), +SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, + 1, 1, 0), +SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, + 1, 1, 0), +}; + +static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = { +SND_SOC_DAPM_INPUT("IN1L"), +SND_SOC_DAPM_INPUT("IN1R"), +SND_SOC_DAPM_INPUT("IN2L"), +SND_SOC_DAPM_INPUT("IN2R"), +SND_SOC_DAPM_INPUT("IN3L"), +SND_SOC_DAPM_INPUT("IN3R"), + +SND_SOC_DAPM_OUTPUT("HPOUTL"), +SND_SOC_DAPM_OUTPUT("HPOUTR"), +SND_SOC_DAPM_OUTPUT("LINEOUTL"), +SND_SOC_DAPM_OUTPUT("LINEOUTR"), +SND_SOC_DAPM_OUTPUT("LOP"), +SND_SOC_DAPM_OUTPUT("LON"), +SND_SOC_DAPM_OUTPUT("ROP"), +SND_SOC_DAPM_OUTPUT("RON"), + +SND_SOC_DAPM_MICBIAS("Mic Bias", WM8903_MIC_BIAS_CONTROL_0, 0, 0), + +SND_SOC_DAPM_MUX("Left Input Mux", SND_SOC_NOPM, 0, 0, &linput_mux), +SND_SOC_DAPM_MUX("Left Input Inverting Mux", SND_SOC_NOPM, 0, 0, + &linput_inv_mux), +SND_SOC_DAPM_MUX("Left Input Mode Mux", SND_SOC_NOPM, 0, 0, &linput_mode_mux), + +SND_SOC_DAPM_MUX("Right Input Mux", SND_SOC_NOPM, 0, 0, &rinput_mux), +SND_SOC_DAPM_MUX("Right Input Inverting Mux", SND_SOC_NOPM, 0, 0, + &rinput_inv_mux), +SND_SOC_DAPM_MUX("Right Input Mode Mux", SND_SOC_NOPM, 0, 0, &rinput_mode_mux), + +SND_SOC_DAPM_PGA("Left Input PGA", WM8903_POWER_MANAGEMENT_0, 1, 0, NULL, 0), +SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0), + +SND_SOC_DAPM_ADC("ADCL", "Left HiFi Capture", WM8903_POWER_MANAGEMENT_6, 1, 0), +SND_SOC_DAPM_ADC("ADCR", "Right HiFi Capture", WM8903_POWER_MANAGEMENT_6, 0, 0), + +SND_SOC_DAPM_DAC("DACL", "Left Playback", WM8903_POWER_MANAGEMENT_6, 3, 0), +SND_SOC_DAPM_DAC("DACR", "Right Playback", WM8903_POWER_MANAGEMENT_6, 2, 0), + +SND_SOC_DAPM_MIXER("Left Output Mixer", WM8903_POWER_MANAGEMENT_1, 1, 0, + left_output_mixer, ARRAY_SIZE(left_output_mixer)), +SND_SOC_DAPM_MIXER("Right Output Mixer", WM8903_POWER_MANAGEMENT_1, 0, 0, + right_output_mixer, ARRAY_SIZE(right_output_mixer)), + +SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0, + left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)), +SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0, + right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)), + +SND_SOC_DAPM_PGA_E("Left Headphone Output PGA", WM8903_POWER_MANAGEMENT_2, + 1, 0, NULL, 0, wm8903_output_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), +SND_SOC_DAPM_PGA_E("Right Headphone Output PGA", WM8903_POWER_MANAGEMENT_2, + 0, 0, NULL, 0, wm8903_output_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), + +SND_SOC_DAPM_PGA_E("Left Line Output PGA", WM8903_POWER_MANAGEMENT_3, 1, 0, + NULL, 0, wm8903_output_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), +SND_SOC_DAPM_PGA_E("Right Line Output PGA", WM8903_POWER_MANAGEMENT_3, 0, 0, + NULL, 0, wm8903_output_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), + +SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0, + NULL, 0), +SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0, + NULL, 0), + +}; + +static const struct snd_soc_dapm_route intercon[] = { + + { "Left Input Mux", "IN1L", "IN1L" }, + { "Left Input Mux", "IN2L", "IN2L" }, + { "Left Input Mux", "IN3L", "IN3L" }, + + { "Left Input Inverting Mux", "IN1L", "IN1L" }, + { "Left Input Inverting Mux", "IN2L", "IN2L" }, + { "Left Input Inverting Mux", "IN3L", "IN3L" }, + + { "Right Input Mux", "IN1R", "IN1R" }, + { "Right Input Mux", "IN2R", "IN2R" }, + { "Right Input Mux", "IN3R", "IN3R" }, + + { "Right Input Inverting Mux", "IN1R", "IN1R" }, + { "Right Input Inverting Mux", "IN2R", "IN2R" }, + { "Right Input Inverting Mux", "IN3R", "IN3R" }, + + { "Left Input Mode Mux", "Single-Ended", "Left Input Inverting Mux" }, + { "Left Input Mode Mux", "Differential Line", + "Left Input Mux" }, + { "Left Input Mode Mux", "Differential Line", + "Left Input Inverting Mux" }, + { "Left Input Mode Mux", "Differential Mic", + "Left Input Mux" }, + { "Left Input Mode Mux", "Differential Mic", + "Left Input Inverting Mux" }, + + { "Right Input Mode Mux", "Single-Ended", + "Right Input Inverting Mux" }, + { "Right Input Mode Mux", "Differential Line", + "Right Input Mux" }, + { "Right Input Mode Mux", "Differential Line", + "Right Input Inverting Mux" }, + { "Right Input Mode Mux", "Differential Mic", + "Right Input Mux" }, + { "Right Input Mode Mux", "Differential Mic", + "Right Input Inverting Mux" }, + + { "Left Input PGA", NULL, "Left Input Mode Mux" }, + { "Right Input PGA", NULL, "Right Input Mode Mux" }, + + { "ADCL", NULL, "Left Input PGA" }, + { "ADCR", NULL, "Right Input PGA" }, + + { "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" }, + { "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" }, + { "Left Output Mixer", "DACL Switch", "DACL" }, + { "Left Output Mixer", "DACR Switch", "DACR" }, + + { "Right Output Mixer", "Left Bypass Switch", "Left Input PGA" }, + { "Right Output Mixer", "Right Bypass Switch", "Right Input PGA" }, + { "Right Output Mixer", "DACL Switch", "DACL" }, + { "Right Output Mixer", "DACR Switch", "DACR" }, + + { "Left Speaker Mixer", "Left Bypass Switch", "Left Input PGA" }, + { "Left Speaker Mixer", "Right Bypass Switch", "Right Input PGA" }, + { "Left Speaker Mixer", "DACL Switch", "DACL" }, + { "Left Speaker Mixer", "DACR Switch", "DACR" }, + + { "Right Speaker Mixer", "Left Bypass Switch", "Left Input PGA" }, + { "Right Speaker Mixer", "Right Bypass Switch", "Right Input PGA" }, + { "Right Speaker Mixer", "DACL Switch", "DACL" }, + { "Right Speaker Mixer", "DACR Switch", "DACR" }, + + { "Left Line Output PGA", NULL, "Left Output Mixer" }, + { "Right Line Output PGA", NULL, "Right Output Mixer" }, + + { "Left Headphone Output PGA", NULL, "Left Output Mixer" }, + { "Right Headphone Output PGA", NULL, "Right Output Mixer" }, + + { "Left Speaker PGA", NULL, "Left Speaker Mixer" }, + { "Right Speaker PGA", NULL, "Right Speaker Mixer" }, + + { "HPOUTL", NULL, "Left Headphone Output PGA" }, + { "HPOUTR", NULL, "Right Headphone Output PGA" }, + + { "LINEOUTL", NULL, "Left Line Output PGA" }, + { "LINEOUTR", NULL, "Right Line Output PGA" }, + + { "LOP", NULL, "Left Speaker PGA" }, + { "LON", NULL, "Left Speaker PGA" }, + + { "ROP", NULL, "Right Speaker PGA" }, + { "RON", NULL, "Right Speaker PGA" }, +}; + +static int wm8903_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, wm8903_dapm_widgets, + ARRAY_SIZE(wm8903_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); + + snd_soc_dapm_new_widgets(codec); + + return 0; +} + +static int wm8903_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct i2c_client *i2c = codec->control_data; + u16 reg, reg2; + + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + reg = wm8903_read(codec, WM8903_VMID_CONTROL_0); + reg &= ~(WM8903_VMID_RES_MASK); + reg |= WM8903_VMID_RES_50K; + wm8903_write(codec, WM8903_VMID_CONTROL_0, reg); + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + wm8903_run_sequence(codec, 0); + wm8903_sync_reg_cache(codec, codec->reg_cache); + + /* Enable low impedence charge pump output */ + reg = wm8903_read(codec, + WM8903_CONTROL_INTERFACE_TEST_1); + wm8903_write(codec, WM8903_CONTROL_INTERFACE_TEST_1, + reg | WM8903_TEST_KEY); + reg2 = wm8903_read(codec, WM8903_CHARGE_PUMP_TEST_1); + wm8903_write(codec, WM8903_CHARGE_PUMP_TEST_1, + reg2 | WM8903_CP_SW_KELVIN_MODE_MASK); + wm8903_write(codec, WM8903_CONTROL_INTERFACE_TEST_1, + reg); + + /* By default no bypass paths are enabled so + * enable Class W support. + */ + dev_dbg(&i2c->dev, "Enabling Class W\n"); + wm8903_write(codec, WM8903_CLASS_W_0, reg | + WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V); + } + + reg = wm8903_read(codec, WM8903_VMID_CONTROL_0); + reg &= ~(WM8903_VMID_RES_MASK); + reg |= WM8903_VMID_RES_250K; + wm8903_write(codec, WM8903_VMID_CONTROL_0, reg); + break; + + case SND_SOC_BIAS_OFF: + wm8903_run_sequence(codec, 32); + break; + } + + codec->bias_level = level; + + return 0; +} + +static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct wm8903_priv *wm8903 = codec->private_data; + + wm8903->sysclk = freq; + + return 0; +} + +static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 aif1 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_1); + + aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK | + WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + break; + case SND_SOC_DAIFMT_CBS_CFM: + aif1 |= WM8903_LRCLK_DIR; + break; + case SND_SOC_DAIFMT_CBM_CFM: + aif1 |= WM8903_LRCLK_DIR | WM8903_BCLK_DIR; + break; + case SND_SOC_DAIFMT_CBM_CFS: + aif1 |= WM8903_BCLK_DIR; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + aif1 |= 0x3; + break; + case SND_SOC_DAIFMT_DSP_B: + aif1 |= 0x3 | WM8903_AIF_LRCLK_INV; + break; + case SND_SOC_DAIFMT_I2S: + aif1 |= 0x2; + break; + case SND_SOC_DAIFMT_RIGHT_J: + aif1 |= 0x1; + break; + case SND_SOC_DAIFMT_LEFT_J: + break; + default: + return -EINVAL; + } + + /* Clock inversion */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + /* frame inversion not valid for DSP modes */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + aif1 |= WM8903_AIF_BCLK_INV; + break; + default: + return -EINVAL; + } + break; + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_RIGHT_J: + case SND_SOC_DAIFMT_LEFT_J: + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + aif1 |= WM8903_AIF_BCLK_INV | WM8903_AIF_LRCLK_INV; + break; + case SND_SOC_DAIFMT_IB_NF: + aif1 |= WM8903_AIF_BCLK_INV; + break; + case SND_SOC_DAIFMT_NB_IF: + aif1 |= WM8903_AIF_LRCLK_INV; + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + wm8903_write(codec, WM8903_AUDIO_INTERFACE_1, aif1); + + return 0; +} + +static int wm8903_digital_mute(struct snd_soc_dai *codec_dai, int mute) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 reg; + + reg = wm8903_read(codec, WM8903_DAC_DIGITAL_1); + + if (mute) + reg |= WM8903_DAC_MUTE; + else + reg &= ~WM8903_DAC_MUTE; + + wm8903_write(codec, WM8903_DAC_DIGITAL_1, reg); + + return 0; +} + +/* Lookup table for CLK_SYS/fs ratio. 256fs or more is recommended + * for optimal performance so we list the lower rates first and match + * on the last match we find. */ +static struct { + int div; + int rate; + int mode; + int mclk_div; +} clk_sys_ratios[] = { + { 64, 0x0, 0x0, 1 }, + { 68, 0x0, 0x1, 1 }, + { 125, 0x0, 0x2, 1 }, + { 128, 0x1, 0x0, 1 }, + { 136, 0x1, 0x1, 1 }, + { 192, 0x2, 0x0, 1 }, + { 204, 0x2, 0x1, 1 }, + + { 64, 0x0, 0x0, 2 }, + { 68, 0x0, 0x1, 2 }, + { 125, 0x0, 0x2, 2 }, + { 128, 0x1, 0x0, 2 }, + { 136, 0x1, 0x1, 2 }, + { 192, 0x2, 0x0, 2 }, + { 204, 0x2, 0x1, 2 }, + + { 250, 0x2, 0x2, 1 }, + { 256, 0x3, 0x0, 1 }, + { 272, 0x3, 0x1, 1 }, + { 384, 0x4, 0x0, 1 }, + { 408, 0x4, 0x1, 1 }, + { 375, 0x4, 0x2, 1 }, + { 512, 0x5, 0x0, 1 }, + { 544, 0x5, 0x1, 1 }, + { 500, 0x5, 0x2, 1 }, + { 768, 0x6, 0x0, 1 }, + { 816, 0x6, 0x1, 1 }, + { 750, 0x6, 0x2, 1 }, + { 1024, 0x7, 0x0, 1 }, + { 1088, 0x7, 0x1, 1 }, + { 1000, 0x7, 0x2, 1 }, + { 1408, 0x8, 0x0, 1 }, + { 1496, 0x8, 0x1, 1 }, + { 1536, 0x9, 0x0, 1 }, + { 1632, 0x9, 0x1, 1 }, + { 1500, 0x9, 0x2, 1 }, + + { 250, 0x2, 0x2, 2 }, + { 256, 0x3, 0x0, 2 }, + { 272, 0x3, 0x1, 2 }, + { 384, 0x4, 0x0, 2 }, + { 408, 0x4, 0x1, 2 }, + { 375, 0x4, 0x2, 2 }, + { 512, 0x5, 0x0, 2 }, + { 544, 0x5, 0x1, 2 }, + { 500, 0x5, 0x2, 2 }, + { 768, 0x6, 0x0, 2 }, + { 816, 0x6, 0x1, 2 }, + { 750, 0x6, 0x2, 2 }, + { 1024, 0x7, 0x0, 2 }, + { 1088, 0x7, 0x1, 2 }, + { 1000, 0x7, 0x2, 2 }, + { 1408, 0x8, 0x0, 2 }, + { 1496, 0x8, 0x1, 2 }, + { 1536, 0x9, 0x0, 2 }, + { 1632, 0x9, 0x1, 2 }, + { 1500, 0x9, 0x2, 2 }, +}; + +/* CLK_SYS/BCLK ratios - multiplied by 10 due to .5s */ +static struct { + int ratio; + int div; +} bclk_divs[] = { + { 10, 0 }, + { 15, 1 }, + { 20, 2 }, + { 30, 3 }, + { 40, 4 }, + { 50, 5 }, + { 55, 6 }, + { 60, 7 }, + { 80, 8 }, + { 100, 9 }, + { 110, 10 }, + { 120, 11 }, + { 160, 12 }, + { 200, 13 }, + { 220, 14 }, + { 240, 15 }, + { 250, 16 }, + { 300, 17 }, + { 320, 18 }, + { 440, 19 }, + { 480, 20 }, +}; + +/* Sample rates for DSP */ +static struct { + int rate; + int value; +} sample_rates[] = { + { 8000, 0 }, + { 11025, 1 }, + { 12000, 2 }, + { 16000, 3 }, + { 22050, 4 }, + { 24000, 5 }, + { 32000, 6 }, + { 44100, 7 }, + { 48000, 8 }, + { 88200, 9 }, + { 96000, 10 }, + { 0, 0 }, +}; + +static int wm8903_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + struct wm8903_priv *wm8903 = codec->private_data; + struct i2c_client *i2c = codec->control_data; + struct snd_pcm_runtime *master_runtime; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + wm8903->playback_active++; + else + wm8903->capture_active++; + + /* The DAI has shared clocks so if we already have a playback or + * capture going then constrain this substream to match it. + */ + if (wm8903->master_substream) { + master_runtime = wm8903->master_substream->runtime; + + dev_dbg(&i2c->dev, "Constraining to %d bits at %dHz\n", + master_runtime->sample_bits, + master_runtime->rate); + + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, + master_runtime->rate, + master_runtime->rate); + + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_SAMPLE_BITS, + master_runtime->sample_bits, + master_runtime->sample_bits); + + wm8903->slave_substream = substream; + } else + wm8903->master_substream = substream; + + return 0; +} + +static void wm8903_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + struct wm8903_priv *wm8903 = codec->private_data; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + wm8903->playback_active--; + else + wm8903->capture_active--; + + if (wm8903->master_substream == substream) + wm8903->master_substream = wm8903->slave_substream; + + wm8903->slave_substream = NULL; +} + +static int wm8903_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + struct wm8903_priv *wm8903 = codec->private_data; + struct i2c_client *i2c = codec->control_data; + int fs = params_rate(params); + int bclk; + int bclk_div; + int i; + int dsp_config; + int clk_config; + int best_val; + int cur_val; + int clk_sys; + + u16 aif1 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_1); + u16 aif2 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_2); + u16 aif3 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_3); + u16 clock0 = wm8903_read(codec, WM8903_CLOCK_RATES_0); + u16 clock1 = wm8903_read(codec, WM8903_CLOCK_RATES_1); + + if (substream == wm8903->slave_substream) { + dev_dbg(&i2c->dev, "Ignoring hw_params for slave substream\n"); + return 0; + } + + /* Configure sample rate logic for DSP - choose nearest rate */ + dsp_config = 0; + best_val = abs(sample_rates[dsp_config].rate - fs); + for (i = 1; i < ARRAY_SIZE(sample_rates); i++) { + cur_val = abs(sample_rates[i].rate - fs); + if (cur_val <= best_val) { + dsp_config = i; + best_val = cur_val; + } + } + + /* Constraints should stop us hitting this but let's make sure */ + if (wm8903->capture_active) + switch (sample_rates[dsp_config].rate) { + case 88200: + case 96000: + dev_err(&i2c->dev, "%dHz unsupported by ADC\n", + fs); + return -EINVAL; + + default: + break; + } + + dev_dbg(&i2c->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate); + clock1 &= ~WM8903_SAMPLE_RATE_MASK; + clock1 |= sample_rates[dsp_config].value; + + aif1 &= ~WM8903_AIF_WL_MASK; + bclk = 2 * fs; + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + bclk *= 16; + break; + case SNDRV_PCM_FORMAT_S20_3LE: + bclk *= 20; + aif1 |= 0x4; + break; + case SNDRV_PCM_FORMAT_S24_LE: + bclk *= 24; + aif1 |= 0x8; + break; + case SNDRV_PCM_FORMAT_S32_LE: + bclk *= 32; + aif1 |= 0xc; + break; + default: + return -EINVAL; + } + + dev_dbg(&i2c->dev, "MCLK = %dHz, target sample rate = %dHz\n", + wm8903->sysclk, fs); + + /* We may not have an MCLK which allows us to generate exactly + * the clock we want, particularly with USB derived inputs, so + * approximate. + */ + clk_config = 0; + best_val = abs((wm8903->sysclk / + (clk_sys_ratios[0].mclk_div * + clk_sys_ratios[0].div)) - fs); + for (i = 1; i < ARRAY_SIZE(clk_sys_ratios); i++) { + cur_val = abs((wm8903->sysclk / + (clk_sys_ratios[i].mclk_div * + clk_sys_ratios[i].div)) - fs); + + if (cur_val <= best_val) { + clk_config = i; + best_val = cur_val; + } + } + + if (clk_sys_ratios[clk_config].mclk_div == 2) { + clock0 |= WM8903_MCLKDIV2; + clk_sys = wm8903->sysclk / 2; + } else { + clock0 &= ~WM8903_MCLKDIV2; + clk_sys = wm8903->sysclk; + } + + clock1 &= ~(WM8903_CLK_SYS_RATE_MASK | + WM8903_CLK_SYS_MODE_MASK); + clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT; + clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT; + + dev_dbg(&i2c->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n", + clk_sys_ratios[clk_config].rate, + clk_sys_ratios[clk_config].mode, + clk_sys_ratios[clk_config].div); + + dev_dbg(&i2c->dev, "Actual CLK_SYS = %dHz\n", clk_sys); + + /* We may not get quite the right frequency if using + * approximate clocks so look for the closest match that is + * higher than the target (we need to ensure that there enough + * BCLKs to clock out the samples). + */ + bclk_div = 0; + best_val = ((clk_sys * 10) / bclk_divs[0].ratio) - bclk; + i = 1; + while (i < ARRAY_SIZE(bclk_divs)) { + cur_val = ((clk_sys * 10) / bclk_divs[i].ratio) - bclk; + if (cur_val < 0) /* BCLK table is sorted */ + break; + bclk_div = i; + best_val = cur_val; + i++; + } + + aif2 &= ~WM8903_BCLK_DIV_MASK; + aif3 &= ~WM8903_LRCLK_RATE_MASK; + + dev_dbg(&i2c->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n", + bclk_divs[bclk_div].ratio / 10, bclk, + (clk_sys * 10) / bclk_divs[bclk_div].ratio); + + aif2 |= bclk_divs[bclk_div].div; + aif3 |= bclk / fs; + + wm8903_write(codec, WM8903_CLOCK_RATES_0, clock0); + wm8903_write(codec, WM8903_CLOCK_RATES_1, clock1); + wm8903_write(codec, WM8903_AUDIO_INTERFACE_1, aif1); + wm8903_write(codec, WM8903_AUDIO_INTERFACE_2, aif2); + wm8903_write(codec, WM8903_AUDIO_INTERFACE_3, aif3); + + return 0; +} + +#define WM8903_PLAYBACK_RATES (SNDRV_PCM_RATE_8000 |\ + SNDRV_PCM_RATE_11025 | \ + SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_22050 | \ + SNDRV_PCM_RATE_32000 | \ + SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_88200 | \ + SNDRV_PCM_RATE_96000) + +#define WM8903_CAPTURE_RATES (SNDRV_PCM_RATE_8000 |\ + SNDRV_PCM_RATE_11025 | \ + SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_22050 | \ + SNDRV_PCM_RATE_32000 | \ + SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000) + +#define WM8903_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE) + +struct snd_soc_dai wm8903_dai = { + .name = "WM8903", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = WM8903_PLAYBACK_RATES, + .formats = WM8903_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = WM8903_CAPTURE_RATES, + .formats = WM8903_FORMATS, + }, + .ops = { + .startup = wm8903_startup, + .shutdown = wm8903_shutdown, + .hw_params = wm8903_hw_params, + }, + .dai_ops = { + .digital_mute = wm8903_digital_mute, + .set_fmt = wm8903_set_dai_fmt, + .set_sysclk = wm8903_set_dai_sysclk + } +}; +EXPORT_SYMBOL_GPL(wm8903_dai); + +static int wm8903_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF); + + return 0; +} + +static int wm8903_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + struct i2c_client *i2c = codec->control_data; + int i; + u16 *reg_cache = codec->reg_cache; + u16 *tmp_cache = kmemdup(codec->reg_cache, sizeof(wm8903_reg_defaults), + GFP_KERNEL); + + /* Bring the codec back up to standby first to minimise pop/clicks */ + wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + wm8903_set_bias_level(codec, codec->suspend_bias_level); + + /* Sync back everything else */ + if (tmp_cache) { + for (i = 2; i < ARRAY_SIZE(wm8903_reg_defaults); i++) + if (tmp_cache[i] != reg_cache[i]) + wm8903_write(codec, i, tmp_cache[i]); + } else { + dev_err(&i2c->dev, "Failed to allocate temporary cache\n"); + } + + return 0; +} + +/* + * initialise the WM8903 driver + * register the mixer and dsp interfaces with the kernel + */ +static int wm8903_init(struct snd_soc_device *socdev) +{ + struct snd_soc_codec *codec = socdev->codec; + struct i2c_client *i2c = codec->control_data; + int ret = 0; + u16 val; + + val = wm8903_hw_read(codec, WM8903_SW_RESET_AND_ID); + if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) { + dev_err(&i2c->dev, + "Device with ID register %x is not a WM8903\n", val); + return -ENODEV; + } + + codec->name = "WM8903"; + codec->owner = THIS_MODULE; + codec->read = wm8903_read; + codec->write = wm8903_write; + codec->bias_level = SND_SOC_BIAS_OFF; + codec->set_bias_level = wm8903_set_bias_level; + codec->dai = &wm8903_dai; + codec->num_dai = 1; + codec->reg_cache_size = ARRAY_SIZE(wm8903_reg_defaults); + codec->reg_cache = kmemdup(wm8903_reg_defaults, + sizeof(wm8903_reg_defaults), + GFP_KERNEL); + if (codec->reg_cache == NULL) { + dev_err(&i2c->dev, "Failed to allocate register cache\n"); + return -ENOMEM; + } + + val = wm8903_read(codec, WM8903_REVISION_NUMBER); + dev_info(&i2c->dev, "WM8903 revision %d\n", + val & WM8903_CHIP_REV_MASK); + + wm8903_reset(codec); + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(&i2c->dev, "failed to create pcms\n"); + goto pcm_err; + } + + /* SYSCLK is required for pretty much anything */ + wm8903_write(codec, WM8903_CLOCK_RATES_2, WM8903_CLK_SYS_ENA); + + /* power on device */ + wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + /* Latch volume update bits */ + val = wm8903_read(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT); + val |= WM8903_ADCVU; + wm8903_write(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT, val); + wm8903_write(codec, WM8903_ADC_DIGITAL_VOLUME_RIGHT, val); + + val = wm8903_read(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT); + val |= WM8903_DACVU; + wm8903_write(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT, val); + wm8903_write(codec, WM8903_DAC_DIGITAL_VOLUME_RIGHT, val); + + val = wm8903_read(codec, WM8903_ANALOGUE_OUT1_LEFT); + val |= WM8903_HPOUTVU; + wm8903_write(codec, WM8903_ANALOGUE_OUT1_LEFT, val); + wm8903_write(codec, WM8903_ANALOGUE_OUT1_RIGHT, val); + + val = wm8903_read(codec, WM8903_ANALOGUE_OUT2_LEFT); + val |= WM8903_LINEOUTVU; + wm8903_write(codec, WM8903_ANALOGUE_OUT2_LEFT, val); + wm8903_write(codec, WM8903_ANALOGUE_OUT2_RIGHT, val); + + val = wm8903_read(codec, WM8903_ANALOGUE_OUT3_LEFT); + val |= WM8903_SPKVU; + wm8903_write(codec, WM8903_ANALOGUE_OUT3_LEFT, val); + wm8903_write(codec, WM8903_ANALOGUE_OUT3_RIGHT, val); + + /* Enable DAC soft mute by default */ + val = wm8903_read(codec, WM8903_DAC_DIGITAL_1); + val |= WM8903_DAC_MUTEMODE; + wm8903_write(codec, WM8903_DAC_DIGITAL_1, val); + + wm8903_add_controls(codec); + wm8903_add_widgets(codec); + ret = snd_soc_register_card(socdev); + if (ret < 0) { + dev_err(&i2c->dev, "wm8903: failed to register card\n"); + goto card_err; + } + + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + kfree(codec->reg_cache); + return ret; +} + +static struct snd_soc_device *wm8903_socdev; + +static int wm8903_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct snd_soc_device *socdev = wm8903_socdev; + struct snd_soc_codec *codec = socdev->codec; + int ret; + + i2c_set_clientdata(i2c, codec); + codec->control_data = i2c; + + ret = wm8903_init(socdev); + if (ret < 0) + dev_err(&i2c->dev, "Device initialisation failed\n"); + + return ret; +} + +static int wm8903_i2c_remove(struct i2c_client *client) +{ + struct snd_soc_codec *codec = i2c_get_clientdata(client); + kfree(codec->reg_cache); + return 0; +} + +/* i2c codec control layer */ +static const struct i2c_device_id wm8903_i2c_id[] = { + { "wm8903", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8903_i2c_id); + +static struct i2c_driver wm8903_i2c_driver = { + .driver = { + .name = "WM8903", + .owner = THIS_MODULE, + }, + .probe = wm8903_i2c_probe, + .remove = wm8903_i2c_remove, + .id_table = wm8903_i2c_id, +}; + +static int wm8903_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct wm8903_setup_data *setup; + struct snd_soc_codec *codec; + struct wm8903_priv *wm8903; + struct i2c_board_info board_info; + struct i2c_adapter *adapter; + struct i2c_client *i2c_client; + int ret = 0; + + setup = socdev->codec_data; + + if (!setup->i2c_address) { + dev_err(&pdev->dev, "No codec address provided\n"); + return -ENODEV; + } + + codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (codec == NULL) + return -ENOMEM; + + wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL); + if (wm8903 == NULL) { + ret = -ENOMEM; + goto err_codec; + } + + codec->private_data = wm8903; + socdev->codec = codec; + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + wm8903_socdev = socdev; + + codec->hw_write = (hw_write_t)i2c_master_send; + ret = i2c_add_driver(&wm8903_i2c_driver); + if (ret != 0) { + dev_err(&pdev->dev, "can't add i2c driver\n"); + goto err_priv; + } else { + memset(&board_info, 0, sizeof(board_info)); + strlcpy(board_info.type, "wm8903", I2C_NAME_SIZE); + board_info.addr = setup->i2c_address; + + adapter = i2c_get_adapter(setup->i2c_bus); + if (!adapter) { + dev_err(&pdev->dev, "Can't get I2C bus %d\n", + setup->i2c_bus); + ret = -ENODEV; + goto err_adapter; + } + + i2c_client = i2c_new_device(adapter, &board_info); + i2c_put_adapter(adapter); + if (i2c_client == NULL) { + dev_err(&pdev->dev, + "I2C driver registration failed\n"); + ret = -ENODEV; + goto err_adapter; + } + } + + return ret; + +err_adapter: + i2c_del_driver(&wm8903_i2c_driver); +err_priv: + kfree(codec->private_data); +err_codec: + kfree(codec); + return ret; +} + +/* power down chip */ +static int wm8903_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + if (codec->control_data) + wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); + i2c_unregister_device(socdev->codec->control_data); + i2c_del_driver(&wm8903_i2c_driver); + kfree(codec->private_data); + kfree(codec); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm8903 = { + .probe = wm8903_probe, + .remove = wm8903_remove, + .suspend = wm8903_suspend, + .resume = wm8903_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm8903); + +MODULE_DESCRIPTION("ASoC WM8903 driver"); +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.cm>"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8903.h b/sound/soc/codecs/wm8903.h new file mode 100644 index 00000000000..cec622f2f66 --- /dev/null +++ b/sound/soc/codecs/wm8903.h @@ -0,0 +1,1463 @@ +/* + * wm8903.h - WM8903 audio codec interface + * + * Copyright 2008 Wolfson Microelectronics PLC. + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _WM8903_H +#define _WM8903_H + +#include <linux/i2c.h> + +extern struct snd_soc_dai wm8903_dai; +extern struct snd_soc_codec_device soc_codec_dev_wm8903; + +struct wm8903_setup_data { + int i2c_bus; + int i2c_address; +}; + +#define WM8903_MCLK_DIV_2 1 +#define WM8903_CLK_SYS 2 +#define WM8903_BCLK 3 +#define WM8903_LRCLK 4 + +/* + * Register values. + */ +#define WM8903_SW_RESET_AND_ID 0x00 +#define WM8903_REVISION_NUMBER 0x01 +#define WM8903_BIAS_CONTROL_0 0x04 +#define WM8903_VMID_CONTROL_0 0x05 +#define WM8903_MIC_BIAS_CONTROL_0 0x06 +#define WM8903_ANALOGUE_DAC_0 0x08 +#define WM8903_ANALOGUE_ADC_0 0x0A +#define WM8903_POWER_MANAGEMENT_0 0x0C +#define WM8903_POWER_MANAGEMENT_1 0x0D +#define WM8903_POWER_MANAGEMENT_2 0x0E +#define WM8903_POWER_MANAGEMENT_3 0x0F +#define WM8903_POWER_MANAGEMENT_4 0x10 +#define WM8903_POWER_MANAGEMENT_5 0x11 +#define WM8903_POWER_MANAGEMENT_6 0x12 +#define WM8903_CLOCK_RATES_0 0x14 +#define WM8903_CLOCK_RATES_1 0x15 +#define WM8903_CLOCK_RATES_2 0x16 +#define WM8903_AUDIO_INTERFACE_0 0x18 +#define WM8903_AUDIO_INTERFACE_1 0x19 +#define WM8903_AUDIO_INTERFACE_2 0x1A +#define WM8903_AUDIO_INTERFACE_3 0x1B +#define WM8903_DAC_DIGITAL_VOLUME_LEFT 0x1E +#define WM8903_DAC_DIGITAL_VOLUME_RIGHT 0x1F +#define WM8903_DAC_DIGITAL_0 0x20 +#define WM8903_DAC_DIGITAL_1 0x21 +#define WM8903_ADC_DIGITAL_VOLUME_LEFT 0x24 +#define WM8903_ADC_DIGITAL_VOLUME_RIGHT 0x25 +#define WM8903_ADC_DIGITAL_0 0x26 +#define WM8903_DIGITAL_MICROPHONE_0 0x27 +#define WM8903_DRC_0 0x28 +#define WM8903_DRC_1 0x29 +#define WM8903_DRC_2 0x2A +#define WM8903_DRC_3 0x2B +#define WM8903_ANALOGUE_LEFT_INPUT_0 0x2C +#define WM8903_ANALOGUE_RIGHT_INPUT_0 0x2D +#define WM8903_ANALOGUE_LEFT_INPUT_1 0x2E +#define WM8903_ANALOGUE_RIGHT_INPUT_1 0x2F +#define WM8903_ANALOGUE_LEFT_MIX_0 0x32 +#define WM8903_ANALOGUE_RIGHT_MIX_0 0x33 +#define WM8903_ANALOGUE_SPK_MIX_LEFT_0 0x34 +#define WM8903_ANALOGUE_SPK_MIX_LEFT_1 0x35 +#define WM8903_ANALOGUE_SPK_MIX_RIGHT_0 0x36 +#define WM8903_ANALOGUE_SPK_MIX_RIGHT_1 0x37 +#define WM8903_ANALOGUE_OUT1_LEFT 0x39 +#define WM8903_ANALOGUE_OUT1_RIGHT 0x3A +#define WM8903_ANALOGUE_OUT2_LEFT 0x3B +#define WM8903_ANALOGUE_OUT2_RIGHT 0x3C +#define WM8903_ANALOGUE_OUT3_LEFT 0x3E +#define WM8903_ANALOGUE_OUT3_RIGHT 0x3F +#define WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0 0x41 +#define WM8903_DC_SERVO_0 0x43 +#define WM8903_DC_SERVO_2 0x45 +#define WM8903_ANALOGUE_HP_0 0x5A +#define WM8903_ANALOGUE_LINEOUT_0 0x5E +#define WM8903_CHARGE_PUMP_0 0x62 +#define WM8903_CLASS_W_0 0x68 +#define WM8903_WRITE_SEQUENCER_0 0x6C +#define WM8903_WRITE_SEQUENCER_1 0x6D +#define WM8903_WRITE_SEQUENCER_2 0x6E +#define WM8903_WRITE_SEQUENCER_3 0x6F +#define WM8903_WRITE_SEQUENCER_4 0x70 +#define WM8903_CONTROL_INTERFACE 0x72 +#define WM8903_GPIO_CONTROL_1 0x74 +#define WM8903_GPIO_CONTROL_2 0x75 +#define WM8903_GPIO_CONTROL_3 0x76 +#define WM8903_GPIO_CONTROL_4 0x77 +#define WM8903_GPIO_CONTROL_5 0x78 +#define WM8903_INTERRUPT_STATUS_1 0x79 +#define WM8903_INTERRUPT_STATUS_1_MASK 0x7A +#define WM8903_INTERRUPT_POLARITY_1 0x7B +#define WM8903_INTERRUPT_CONTROL 0x7E +#define WM8903_CONTROL_INTERFACE_TEST_1 0x81 +#define WM8903_CHARGE_PUMP_TEST_1 0x95 +#define WM8903_CLOCK_RATE_TEST_4 0xA4 +#define WM8903_ANALOGUE_OUTPUT_BIAS_0 0xAC + +#define WM8903_REGISTER_COUNT 75 +#define WM8903_MAX_REGISTER 0xAC + +/* + * Field Definitions. + */ + +/* + * R0 (0x00) - SW Reset and ID + */ +#define WM8903_SW_RESET_DEV_ID1_MASK 0xFFFF /* SW_RESET_DEV_ID1 - [15:0] */ +#define WM8903_SW_RESET_DEV_ID1_SHIFT 0 /* SW_RESET_DEV_ID1 - [15:0] */ +#define WM8903_SW_RESET_DEV_ID1_WIDTH 16 /* SW_RESET_DEV_ID1 - [15:0] */ + +/* + * R1 (0x01) - Revision Number + */ +#define WM8903_CHIP_REV_MASK 0x000F /* CHIP_REV - [3:0] */ +#define WM8903_CHIP_REV_SHIFT 0 /* CHIP_REV - [3:0] */ +#define WM8903_CHIP_REV_WIDTH 4 /* CHIP_REV - [3:0] */ + +/* + * R4 (0x04) - Bias Control 0 + */ +#define WM8903_POBCTRL 0x0010 /* POBCTRL */ +#define WM8903_POBCTRL_MASK 0x0010 /* POBCTRL */ +#define WM8903_POBCTRL_SHIFT 4 /* POBCTRL */ +#define WM8903_POBCTRL_WIDTH 1 /* POBCTRL */ +#define WM8903_ISEL_MASK 0x000C /* ISEL - [3:2] */ +#define WM8903_ISEL_SHIFT 2 /* ISEL - [3:2] */ +#define WM8903_ISEL_WIDTH 2 /* ISEL - [3:2] */ +#define WM8903_STARTUP_BIAS_ENA 0x0002 /* STARTUP_BIAS_ENA */ +#define WM8903_STARTUP_BIAS_ENA_MASK 0x0002 /* STARTUP_BIAS_ENA */ +#define WM8903_STARTUP_BIAS_ENA_SHIFT 1 /* STARTUP_BIAS_ENA */ +#define WM8903_STARTUP_BIAS_ENA_WIDTH 1 /* STARTUP_BIAS_ENA */ +#define WM8903_BIAS_ENA 0x0001 /* BIAS_ENA */ +#define WM8903_BIAS_ENA_MASK 0x0001 /* BIAS_ENA */ +#define WM8903_BIAS_ENA_SHIFT 0 /* BIAS_ENA */ +#define WM8903_BIAS_ENA_WIDTH 1 /* BIAS_ENA */ + +/* + * R5 (0x05) - VMID Control 0 + */ +#define WM8903_VMID_TIE_ENA 0x0080 /* VMID_TIE_ENA */ +#define WM8903_VMID_TIE_ENA_MASK 0x0080 /* VMID_TIE_ENA */ +#define WM8903_VMID_TIE_ENA_SHIFT 7 /* VMID_TIE_ENA */ +#define WM8903_VMID_TIE_ENA_WIDTH 1 /* VMID_TIE_ENA */ +#define WM8903_BUFIO_ENA 0x0040 /* BUFIO_ENA */ +#define WM8903_BUFIO_ENA_MASK 0x0040 /* BUFIO_ENA */ +#define WM8903_BUFIO_ENA_SHIFT 6 /* BUFIO_ENA */ +#define WM8903_BUFIO_ENA_WIDTH 1 /* BUFIO_ENA */ +#define WM8903_VMID_IO_ENA 0x0020 /* VMID_IO_ENA */ +#define WM8903_VMID_IO_ENA_MASK 0x0020 /* VMID_IO_ENA */ +#define WM8903_VMID_IO_ENA_SHIFT 5 /* VMID_IO_ENA */ +#define WM8903_VMID_IO_ENA_WIDTH 1 /* VMID_IO_ENA */ +#define WM8903_VMID_SOFT_MASK 0x0018 /* VMID_SOFT - [4:3] */ +#define WM8903_VMID_SOFT_SHIFT 3 /* VMID_SOFT - [4:3] */ +#define WM8903_VMID_SOFT_WIDTH 2 /* VMID_SOFT - [4:3] */ +#define WM8903_VMID_RES_MASK 0x0006 /* VMID_RES - [2:1] */ +#define WM8903_VMID_RES_SHIFT 1 /* VMID_RES - [2:1] */ +#define WM8903_VMID_RES_WIDTH 2 /* VMID_RES - [2:1] */ +#define WM8903_VMID_BUF_ENA 0x0001 /* VMID_BUF_ENA */ +#define WM8903_VMID_BUF_ENA_MASK 0x0001 /* VMID_BUF_ENA */ +#define WM8903_VMID_BUF_ENA_SHIFT 0 /* VMID_BUF_ENA */ +#define WM8903_VMID_BUF_ENA_WIDTH 1 /* VMID_BUF_ENA */ + +#define WM8903_VMID_RES_50K 2 +#define WM8903_VMID_RES_250K 3 +#define WM8903_VMID_RES_5K 4 + +/* + * R6 (0x06) - Mic Bias Control 0 + */ +#define WM8903_MICDET_HYST_ENA 0x0080 /* MICDET_HYST_ENA */ +#define WM8903_MICDET_HYST_ENA_MASK 0x0080 /* MICDET_HYST_ENA */ +#define WM8903_MICDET_HYST_ENA_SHIFT 7 /* MICDET_HYST_ENA */ +#define WM8903_MICDET_HYST_ENA_WIDTH 1 /* MICDET_HYST_ENA */ +#define WM8903_MICDET_THR_MASK 0x0070 /* MICDET_THR - [6:4] */ +#define WM8903_MICDET_THR_SHIFT 4 /* MICDET_THR - [6:4] */ +#define WM8903_MICDET_THR_WIDTH 3 /* MICDET_THR - [6:4] */ +#define WM8903_MICSHORT_THR_MASK 0x000C /* MICSHORT_THR - [3:2] */ +#define WM8903_MICSHORT_THR_SHIFT 2 /* MICSHORT_THR - [3:2] */ +#define WM8903_MICSHORT_THR_WIDTH 2 /* MICSHORT_THR - [3:2] */ +#define WM8903_MICDET_ENA 0x0002 /* MICDET_ENA */ +#define WM8903_MICDET_ENA_MASK 0x0002 /* MICDET_ENA */ +#define WM8903_MICDET_ENA_SHIFT 1 /* MICDET_ENA */ +#define WM8903_MICDET_ENA_WIDTH 1 /* MICDET_ENA */ +#define WM8903_MICBIAS_ENA 0x0001 /* MICBIAS_ENA */ +#define WM8903_MICBIAS_ENA_MASK 0x0001 /* MICBIAS_ENA */ +#define WM8903_MICBIAS_ENA_SHIFT 0 /* MICBIAS_ENA */ +#define WM8903_MICBIAS_ENA_WIDTH 1 /* MICBIAS_ENA */ + +/* + * R8 (0x08) - Analogue DAC 0 + */ +#define WM8903_DACBIAS_SEL_MASK 0x0018 /* DACBIAS_SEL - [4:3] */ +#define WM8903_DACBIAS_SEL_SHIFT 3 /* DACBIAS_SEL - [4:3] */ +#define WM8903_DACBIAS_SEL_WIDTH 2 /* DACBIAS_SEL - [4:3] */ +#define WM8903_DACVMID_BIAS_SEL_MASK 0x0006 /* DACVMID_BIAS_SEL - [2:1] */ +#define WM8903_DACVMID_BIAS_SEL_SHIFT 1 /* DACVMID_BIAS_SEL - [2:1] */ +#define WM8903_DACVMID_BIAS_SEL_WIDTH 2 /* DACVMID_BIAS_SEL - [2:1] */ + +/* + * R10 (0x0A) - Analogue ADC 0 + */ +#define WM8903_ADC_OSR128 0x0001 /* ADC_OSR128 */ +#define WM8903_ADC_OSR128_MASK 0x0001 /* ADC_OSR128 */ +#define WM8903_ADC_OSR128_SHIFT 0 /* ADC_OSR128 */ +#define WM8903_ADC_OSR128_WIDTH 1 /* ADC_OSR128 */ + +/* + * R12 (0x0C) - Power Management 0 + */ +#define WM8903_INL_ENA 0x0002 /* INL_ENA */ +#define WM8903_INL_ENA_MASK 0x0002 /* INL_ENA */ +#define WM8903_INL_ENA_SHIFT 1 /* INL_ENA */ +#define WM8903_INL_ENA_WIDTH 1 /* INL_ENA */ +#define WM8903_INR_ENA 0x0001 /* INR_ENA */ +#define WM8903_INR_ENA_MASK 0x0001 /* INR_ENA */ +#define WM8903_INR_ENA_SHIFT 0 /* INR_ENA */ +#define WM8903_INR_ENA_WIDTH 1 /* INR_ENA */ + +/* + * R13 (0x0D) - Power Management 1 + */ +#define WM8903_MIXOUTL_ENA 0x0002 /* MIXOUTL_ENA */ +#define WM8903_MIXOUTL_ENA_MASK 0x0002 /* MIXOUTL_ENA */ +#define WM8903_MIXOUTL_ENA_SHIFT 1 /* MIXOUTL_ENA */ +#define WM8903_MIXOUTL_ENA_WIDTH 1 /* MIXOUTL_ENA */ +#define WM8903_MIXOUTR_ENA 0x0001 /* MIXOUTR_ENA */ +#define WM8903_MIXOUTR_ENA_MASK 0x0001 /* MIXOUTR_ENA */ +#define WM8903_MIXOUTR_ENA_SHIFT 0 /* MIXOUTR_ENA */ +#define WM8903_MIXOUTR_ENA_WIDTH 1 /* MIXOUTR_ENA */ + +/* + * R14 (0x0E) - Power Management 2 + */ +#define WM8903_HPL_PGA_ENA 0x0002 /* HPL_PGA_ENA */ +#define WM8903_HPL_PGA_ENA_MASK 0x0002 /* HPL_PGA_ENA */ +#define WM8903_HPL_PGA_ENA_SHIFT 1 /* HPL_PGA_ENA */ +#define WM8903_HPL_PGA_ENA_WIDTH 1 /* HPL_PGA_ENA */ +#define WM8903_HPR_PGA_ENA 0x0001 /* HPR_PGA_ENA */ +#define WM8903_HPR_PGA_ENA_MASK 0x0001 /* HPR_PGA_ENA */ +#define WM8903_HPR_PGA_ENA_SHIFT 0 /* HPR_PGA_ENA */ +#define WM8903_HPR_PGA_ENA_WIDTH 1 /* HPR_PGA_ENA */ + +/* + * R15 (0x0F) - Power Management 3 + */ +#define WM8903_LINEOUTL_PGA_ENA 0x0002 /* LINEOUTL_PGA_ENA */ +#define WM8903_LINEOUTL_PGA_ENA_MASK 0x0002 /* LINEOUTL_PGA_ENA */ +#define WM8903_LINEOUTL_PGA_ENA_SHIFT 1 /* LINEOUTL_PGA_ENA */ +#define WM8903_LINEOUTL_PGA_ENA_WIDTH 1 /* LINEOUTL_PGA_ENA */ +#define WM8903_LINEOUTR_PGA_ENA 0x0001 /* LINEOUTR_PGA_ENA */ +#define WM8903_LINEOUTR_PGA_ENA_MASK 0x0001 /* LINEOUTR_PGA_ENA */ +#define WM8903_LINEOUTR_PGA_ENA_SHIFT 0 /* LINEOUTR_PGA_ENA */ +#define WM8903_LINEOUTR_PGA_ENA_WIDTH 1 /* LINEOUTR_PGA_ENA */ + +/* + * R16 (0x10) - Power Management 4 + */ +#define WM8903_MIXSPKL_ENA 0x0002 /* MIXSPKL_ENA */ +#define WM8903_MIXSPKL_ENA_MASK 0x0002 /* MIXSPKL_ENA */ +#define WM8903_MIXSPKL_ENA_SHIFT 1 /* MIXSPKL_ENA */ +#define WM8903_MIXSPKL_ENA_WIDTH 1 /* MIXSPKL_ENA */ +#define WM8903_MIXSPKR_ENA 0x0001 /* MIXSPKR_ENA */ +#define WM8903_MIXSPKR_ENA_MASK 0x0001 /* MIXSPKR_ENA */ +#define WM8903_MIXSPKR_ENA_SHIFT 0 /* MIXSPKR_ENA */ +#define WM8903_MIXSPKR_ENA_WIDTH 1 /* MIXSPKR_ENA */ + +/* + * R17 (0x11) - Power Management 5 + */ +#define WM8903_SPKL_ENA 0x0002 /* SPKL_ENA */ +#define WM8903_SPKL_ENA_MASK 0x0002 /* SPKL_ENA */ +#define WM8903_SPKL_ENA_SHIFT 1 /* SPKL_ENA */ +#define WM8903_SPKL_ENA_WIDTH 1 /* SPKL_ENA */ +#define WM8903_SPKR_ENA 0x0001 /* SPKR_ENA */ +#define WM8903_SPKR_ENA_MASK 0x0001 /* SPKR_ENA */ +#define WM8903_SPKR_ENA_SHIFT 0 /* SPKR_ENA */ +#define WM8903_SPKR_ENA_WIDTH 1 /* SPKR_ENA */ + +/* + * R18 (0x12) - Power Management 6 + */ +#define WM8903_DACL_ENA 0x0008 /* DACL_ENA */ +#define WM8903_DACL_ENA_MASK 0x0008 /* DACL_ENA */ +#define WM8903_DACL_ENA_SHIFT 3 /* DACL_ENA */ +#define WM8903_DACL_ENA_WIDTH 1 /* DACL_ENA */ +#define WM8903_DACR_ENA 0x0004 /* DACR_ENA */ +#define WM8903_DACR_ENA_MASK 0x0004 /* DACR_ENA */ +#define WM8903_DACR_ENA_SHIFT 2 /* DACR_ENA */ +#define WM8903_DACR_ENA_WIDTH 1 /* DACR_ENA */ +#define WM8903_ADCL_ENA 0x0002 /* ADCL_ENA */ +#define WM8903_ADCL_ENA_MASK 0x0002 /* ADCL_ENA */ +#define WM8903_ADCL_ENA_SHIFT 1 /* ADCL_ENA */ +#define WM8903_ADCL_ENA_WIDTH 1 /* ADCL_ENA */ +#define WM8903_ADCR_ENA 0x0001 /* ADCR_ENA */ +#define WM8903_ADCR_ENA_MASK 0x0001 /* ADCR_ENA */ +#define WM8903_ADCR_ENA_SHIFT 0 /* ADCR_ENA */ +#define WM8903_ADCR_ENA_WIDTH 1 /* ADCR_ENA */ + +/* + * R20 (0x14) - Clock Rates 0 + */ +#define WM8903_MCLKDIV2 0x0001 /* MCLKDIV2 */ +#define WM8903_MCLKDIV2_MASK 0x0001 /* MCLKDIV2 */ +#define WM8903_MCLKDIV2_SHIFT 0 /* MCLKDIV2 */ +#define WM8903_MCLKDIV2_WIDTH 1 /* MCLKDIV2 */ + +/* + * R21 (0x15) - Clock Rates 1 + */ +#define WM8903_CLK_SYS_RATE_MASK 0x3C00 /* CLK_SYS_RATE - [13:10] */ +#define WM8903_CLK_SYS_RATE_SHIFT 10 /* CLK_SYS_RATE - [13:10] */ +#define WM8903_CLK_SYS_RATE_WIDTH 4 /* CLK_SYS_RATE - [13:10] */ +#define WM8903_CLK_SYS_MODE_MASK 0x0300 /* CLK_SYS_MODE - [9:8] */ +#define WM8903_CLK_SYS_MODE_SHIFT 8 /* CLK_SYS_MODE - [9:8] */ +#define WM8903_CLK_SYS_MODE_WIDTH 2 /* CLK_SYS_MODE - [9:8] */ +#define WM8903_SAMPLE_RATE_MASK 0x000F /* SAMPLE_RATE - [3:0] */ +#define WM8903_SAMPLE_RATE_SHIFT 0 /* SAMPLE_RATE - [3:0] */ +#define WM8903_SAMPLE_RATE_WIDTH 4 /* SAMPLE_RATE - [3:0] */ + +/* + * R22 (0x16) - Clock Rates 2 + */ +#define WM8903_CLK_SYS_ENA 0x0004 /* CLK_SYS_ENA */ +#define WM8903_CLK_SYS_ENA_MASK 0x0004 /* CLK_SYS_ENA */ +#define WM8903_CLK_SYS_ENA_SHIFT 2 /* CLK_SYS_ENA */ +#define WM8903_CLK_SYS_ENA_WIDTH 1 /* CLK_SYS_ENA */ +#define WM8903_CLK_DSP_ENA 0x0002 /* CLK_DSP_ENA */ +#define WM8903_CLK_DSP_ENA_MASK 0x0002 /* CLK_DSP_ENA */ +#define WM8903_CLK_DSP_ENA_SHIFT 1 /* CLK_DSP_ENA */ +#define WM8903_CLK_DSP_ENA_WIDTH 1 /* CLK_DSP_ENA */ +#define WM8903_TO_ENA 0x0001 /* TO_ENA */ +#define WM8903_TO_ENA_MASK 0x0001 /* TO_ENA */ +#define WM8903_TO_ENA_SHIFT 0 /* TO_ENA */ +#define WM8903_TO_ENA_WIDTH 1 /* TO_ENA */ + +/* + * R24 (0x18) - Audio Interface 0 + */ +#define WM8903_DACL_DATINV 0x1000 /* DACL_DATINV */ +#define WM8903_DACL_DATINV_MASK 0x1000 /* DACL_DATINV */ +#define WM8903_DACL_DATINV_SHIFT 12 /* DACL_DATINV */ +#define WM8903_DACL_DATINV_WIDTH 1 /* DACL_DATINV */ +#define WM8903_DACR_DATINV 0x0800 /* DACR_DATINV */ +#define WM8903_DACR_DATINV_MASK 0x0800 /* DACR_DATINV */ +#define WM8903_DACR_DATINV_SHIFT 11 /* DACR_DATINV */ +#define WM8903_DACR_DATINV_WIDTH 1 /* DACR_DATINV */ +#define WM8903_DAC_BOOST_MASK 0x0600 /* DAC_BOOST - [10:9] */ +#define WM8903_DAC_BOOST_SHIFT 9 /* DAC_BOOST - [10:9] */ +#define WM8903_DAC_BOOST_WIDTH 2 /* DAC_BOOST - [10:9] */ +#define WM8903_LOOPBACK 0x0100 /* LOOPBACK */ +#define WM8903_LOOPBACK_MASK 0x0100 /* LOOPBACK */ +#define WM8903_LOOPBACK_SHIFT 8 /* LOOPBACK */ +#define WM8903_LOOPBACK_WIDTH 1 /* LOOPBACK */ +#define WM8903_AIFADCL_SRC 0x0080 /* AIFADCL_SRC */ +#define WM8903_AIFADCL_SRC_MASK 0x0080 /* AIFADCL_SRC */ +#define WM8903_AIFADCL_SRC_SHIFT 7 /* AIFADCL_SRC */ +#define WM8903_AIFADCL_SRC_WIDTH 1 /* AIFADCL_SRC */ +#define WM8903_AIFADCR_SRC 0x0040 /* AIFADCR_SRC */ +#define WM8903_AIFADCR_SRC_MASK 0x0040 /* AIFADCR_SRC */ +#define WM8903_AIFADCR_SRC_SHIFT 6 /* AIFADCR_SRC */ +#define WM8903_AIFADCR_SRC_WIDTH 1 /* AIFADCR_SRC */ +#define WM8903_AIFDACL_SRC 0x0020 /* AIFDACL_SRC */ +#define WM8903_AIFDACL_SRC_MASK 0x0020 /* AIFDACL_SRC */ +#define WM8903_AIFDACL_SRC_SHIFT 5 /* AIFDACL_SRC */ +#define WM8903_AIFDACL_SRC_WIDTH 1 /* AIFDACL_SRC */ +#define WM8903_AIFDACR_SRC 0x0010 /* AIFDACR_SRC */ +#define WM8903_AIFDACR_SRC_MASK 0x0010 /* AIFDACR_SRC */ +#define WM8903_AIFDACR_SRC_SHIFT 4 /* AIFDACR_SRC */ +#define WM8903_AIFDACR_SRC_WIDTH 1 /* AIFDACR_SRC */ +#define WM8903_ADC_COMP 0x0008 /* ADC_COMP */ +#define WM8903_ADC_COMP_MASK 0x0008 /* ADC_COMP */ +#define WM8903_ADC_COMP_SHIFT 3 /* ADC_COMP */ +#define WM8903_ADC_COMP_WIDTH 1 /* ADC_COMP */ +#define WM8903_ADC_COMPMODE 0x0004 /* ADC_COMPMODE */ +#define WM8903_ADC_COMPMODE_MASK 0x0004 /* ADC_COMPMODE */ +#define WM8903_ADC_COMPMODE_SHIFT 2 /* ADC_COMPMODE */ +#define WM8903_ADC_COMPMODE_WIDTH 1 /* ADC_COMPMODE */ +#define WM8903_DAC_COMP 0x0002 /* DAC_COMP */ +#define WM8903_DAC_COMP_MASK 0x0002 /* DAC_COMP */ +#define WM8903_DAC_COMP_SHIFT 1 /* DAC_COMP */ +#define WM8903_DAC_COMP_WIDTH 1 /* DAC_COMP */ +#define WM8903_DAC_COMPMODE 0x0001 /* DAC_COMPMODE */ +#define WM8903_DAC_COMPMODE_MASK 0x0001 /* DAC_COMPMODE */ +#define WM8903_DAC_COMPMODE_SHIFT 0 /* DAC_COMPMODE */ +#define WM8903_DAC_COMPMODE_WIDTH 1 /* DAC_COMPMODE */ + +/* + * R25 (0x19) - Audio Interface 1 + */ +#define WM8903_AIFDAC_TDM 0x2000 /* AIFDAC_TDM */ +#define WM8903_AIFDAC_TDM_MASK 0x2000 /* AIFDAC_TDM */ +#define WM8903_AIFDAC_TDM_SHIFT 13 /* AIFDAC_TDM */ +#define WM8903_AIFDAC_TDM_WIDTH 1 /* AIFDAC_TDM */ +#define WM8903_AIFDAC_TDM_CHAN 0x1000 /* AIFDAC_TDM_CHAN */ +#define WM8903_AIFDAC_TDM_CHAN_MASK 0x1000 /* AIFDAC_TDM_CHAN */ +#define WM8903_AIFDAC_TDM_CHAN_SHIFT 12 /* AIFDAC_TDM_CHAN */ +#define WM8903_AIFDAC_TDM_CHAN_WIDTH 1 /* AIFDAC_TDM_CHAN */ +#define WM8903_AIFADC_TDM 0x0800 /* AIFADC_TDM */ +#define WM8903_AIFADC_TDM_MASK 0x0800 /* AIFADC_TDM */ +#define WM8903_AIFADC_TDM_SHIFT 11 /* AIFADC_TDM */ +#define WM8903_AIFADC_TDM_WIDTH 1 /* AIFADC_TDM */ +#define WM8903_AIFADC_TDM_CHAN 0x0400 /* AIFADC_TDM_CHAN */ +#define WM8903_AIFADC_TDM_CHAN_MASK 0x0400 /* AIFADC_TDM_CHAN */ +#define WM8903_AIFADC_TDM_CHAN_SHIFT 10 /* AIFADC_TDM_CHAN */ +#define WM8903_AIFADC_TDM_CHAN_WIDTH 1 /* AIFADC_TDM_CHAN */ +#define WM8903_LRCLK_DIR 0x0200 /* LRCLK_DIR */ +#define WM8903_LRCLK_DIR_MASK 0x0200 /* LRCLK_DIR */ +#define WM8903_LRCLK_DIR_SHIFT 9 /* LRCLK_DIR */ +#define WM8903_LRCLK_DIR_WIDTH 1 /* LRCLK_DIR */ +#define WM8903_AIF_BCLK_INV 0x0080 /* AIF_BCLK_INV */ +#define WM8903_AIF_BCLK_INV_MASK 0x0080 /* AIF_BCLK_INV */ +#define WM8903_AIF_BCLK_INV_SHIFT 7 /* AIF_BCLK_INV */ +#define WM8903_AIF_BCLK_INV_WIDTH 1 /* AIF_BCLK_INV */ +#define WM8903_BCLK_DIR 0x0040 /* BCLK_DIR */ +#define WM8903_BCLK_DIR_MASK 0x0040 /* BCLK_DIR */ +#define WM8903_BCLK_DIR_SHIFT 6 /* BCLK_DIR */ +#define WM8903_BCLK_DIR_WIDTH 1 /* BCLK_DIR */ +#define WM8903_AIF_LRCLK_INV 0x0010 /* AIF_LRCLK_INV */ +#define WM8903_AIF_LRCLK_INV_MASK 0x0010 /* AIF_LRCLK_INV */ +#define WM8903_AIF_LRCLK_INV_SHIFT 4 /* AIF_LRCLK_INV */ +#define WM8903_AIF_LRCLK_INV_WIDTH 1 /* AIF_LRCLK_INV */ +#define WM8903_AIF_WL_MASK 0x000C /* AIF_WL - [3:2] */ +#define WM8903_AIF_WL_SHIFT 2 /* AIF_WL - [3:2] */ +#define WM8903_AIF_WL_WIDTH 2 /* AIF_WL - [3:2] */ +#define WM8903_AIF_FMT_MASK 0x0003 /* AIF_FMT - [1:0] */ +#define WM8903_AIF_FMT_SHIFT 0 /* AIF_FMT - [1:0] */ +#define WM8903_AIF_FMT_WIDTH 2 /* AIF_FMT - [1:0] */ + +/* + * R26 (0x1A) - Audio Interface 2 + */ +#define WM8903_BCLK_DIV_MASK 0x001F /* BCLK_DIV - [4:0] */ +#define WM8903_BCLK_DIV_SHIFT 0 /* BCLK_DIV - [4:0] */ +#define WM8903_BCLK_DIV_WIDTH 5 /* BCLK_DIV - [4:0] */ + +/* + * R27 (0x1B) - Audio Interface 3 + */ +#define WM8903_LRCLK_RATE_MASK 0x07FF /* LRCLK_RATE - [10:0] */ +#define WM8903_LRCLK_RATE_SHIFT 0 /* LRCLK_RATE - [10:0] */ +#define WM8903_LRCLK_RATE_WIDTH 11 /* LRCLK_RATE - [10:0] */ + +/* + * R30 (0x1E) - DAC Digital Volume Left + */ +#define WM8903_DACVU 0x0100 /* DACVU */ +#define WM8903_DACVU_MASK 0x0100 /* DACVU */ +#define WM8903_DACVU_SHIFT 8 /* DACVU */ +#define WM8903_DACVU_WIDTH 1 /* DACVU */ +#define WM8903_DACL_VOL_MASK 0x00FF /* DACL_VOL - [7:0] */ +#define WM8903_DACL_VOL_SHIFT 0 /* DACL_VOL - [7:0] */ +#define WM8903_DACL_VOL_WIDTH 8 /* DACL_VOL - [7:0] */ + +/* + * R31 (0x1F) - DAC Digital Volume Right + */ +#define WM8903_DACVU 0x0100 /* DACVU */ +#define WM8903_DACVU_MASK 0x0100 /* DACVU */ +#define WM8903_DACVU_SHIFT 8 /* DACVU */ +#define WM8903_DACVU_WIDTH 1 /* DACVU */ +#define WM8903_DACR_VOL_MASK 0x00FF /* DACR_VOL - [7:0] */ +#define WM8903_DACR_VOL_SHIFT 0 /* DACR_VOL - [7:0] */ +#define WM8903_DACR_VOL_WIDTH 8 /* DACR_VOL - [7:0] */ + +/* + * R32 (0x20) - DAC Digital 0 + */ +#define WM8903_ADCL_DAC_SVOL_MASK 0x0F00 /* ADCL_DAC_SVOL - [11:8] */ +#define WM8903_ADCL_DAC_SVOL_SHIFT 8 /* ADCL_DAC_SVOL - [11:8] */ +#define WM8903_ADCL_DAC_SVOL_WIDTH 4 /* ADCL_DAC_SVOL - [11:8] */ +#define WM8903_ADCR_DAC_SVOL_MASK 0x00F0 /* ADCR_DAC_SVOL - [7:4] */ +#define WM8903_ADCR_DAC_SVOL_SHIFT 4 /* ADCR_DAC_SVOL - [7:4] */ +#define WM8903_ADCR_DAC_SVOL_WIDTH 4 /* ADCR_DAC_SVOL - [7:4] */ +#define WM8903_ADC_TO_DACL_MASK 0x000C /* ADC_TO_DACL - [3:2] */ +#define WM8903_ADC_TO_DACL_SHIFT 2 /* ADC_TO_DACL - [3:2] */ +#define WM8903_ADC_TO_DACL_WIDTH 2 /* ADC_TO_DACL - [3:2] */ +#define WM8903_ADC_TO_DACR_MASK 0x0003 /* ADC_TO_DACR - [1:0] */ +#define WM8903_ADC_TO_DACR_SHIFT 0 /* ADC_TO_DACR - [1:0] */ +#define WM8903_ADC_TO_DACR_WIDTH 2 /* ADC_TO_DACR - [1:0] */ + +/* + * R33 (0x21) - DAC Digital 1 + */ +#define WM8903_DAC_MONO 0x1000 /* DAC_MONO */ +#define WM8903_DAC_MONO_MASK 0x1000 /* DAC_MONO */ +#define WM8903_DAC_MONO_SHIFT 12 /* DAC_MONO */ +#define WM8903_DAC_MONO_WIDTH 1 /* DAC_MONO */ +#define WM8903_DAC_SB_FILT 0x0800 /* DAC_SB_FILT */ +#define WM8903_DAC_SB_FILT_MASK 0x0800 /* DAC_SB_FILT */ +#define WM8903_DAC_SB_FILT_SHIFT 11 /* DAC_SB_FILT */ +#define WM8903_DAC_SB_FILT_WIDTH 1 /* DAC_SB_FILT */ +#define WM8903_DAC_MUTERATE 0x0400 /* DAC_MUTERATE */ +#define WM8903_DAC_MUTERATE_MASK 0x0400 /* DAC_MUTERATE */ +#define WM8903_DAC_MUTERATE_SHIFT 10 /* DAC_MUTERATE */ +#define WM8903_DAC_MUTERATE_WIDTH 1 /* DAC_MUTERATE */ +#define WM8903_DAC_MUTEMODE 0x0200 /* DAC_MUTEMODE */ +#define WM8903_DAC_MUTEMODE_MASK 0x0200 /* DAC_MUTEMODE */ +#define WM8903_DAC_MUTEMODE_SHIFT 9 /* DAC_MUTEMODE */ +#define WM8903_DAC_MUTEMODE_WIDTH 1 /* DAC_MUTEMODE */ +#define WM8903_DAC_MUTE 0x0008 /* DAC_MUTE */ +#define WM8903_DAC_MUTE_MASK 0x0008 /* DAC_MUTE */ +#define WM8903_DAC_MUTE_SHIFT 3 /* DAC_MUTE */ +#define WM8903_DAC_MUTE_WIDTH 1 /* DAC_MUTE */ +#define WM8903_DEEMPH_MASK 0x0006 /* DEEMPH - [2:1] */ +#define WM8903_DEEMPH_SHIFT 1 /* DEEMPH - [2:1] */ +#define WM8903_DEEMPH_WIDTH 2 /* DEEMPH - [2:1] */ + +/* + * R36 (0x24) - ADC Digital Volume Left + */ +#define WM8903_ADCVU 0x0100 /* ADCVU */ +#define WM8903_ADCVU_MASK 0x0100 /* ADCVU */ +#define WM8903_ADCVU_SHIFT 8 /* ADCVU */ +#define WM8903_ADCVU_WIDTH 1 /* ADCVU */ +#define WM8903_ADCL_VOL_MASK 0x00FF /* ADCL_VOL - [7:0] */ +#define WM8903_ADCL_VOL_SHIFT 0 /* ADCL_VOL - [7:0] */ +#define WM8903_ADCL_VOL_WIDTH 8 /* ADCL_VOL - [7:0] */ + +/* + * R37 (0x25) - ADC Digital Volume Right + */ +#define WM8903_ADCVU 0x0100 /* ADCVU */ +#define WM8903_ADCVU_MASK 0x0100 /* ADCVU */ +#define WM8903_ADCVU_SHIFT 8 /* ADCVU */ +#define WM8903_ADCVU_WIDTH 1 /* ADCVU */ +#define WM8903_ADCR_VOL_MASK 0x00FF /* ADCR_VOL - [7:0] */ +#define WM8903_ADCR_VOL_SHIFT 0 /* ADCR_VOL - [7:0] */ +#define WM8903_ADCR_VOL_WIDTH 8 /* ADCR_VOL - [7:0] */ + +/* + * R38 (0x26) - ADC Digital 0 + */ +#define WM8903_ADC_HPF_CUT_MASK 0x0060 /* ADC_HPF_CUT - [6:5] */ +#define WM8903_ADC_HPF_CUT_SHIFT 5 /* ADC_HPF_CUT - [6:5] */ +#define WM8903_ADC_HPF_CUT_WIDTH 2 /* ADC_HPF_CUT - [6:5] */ +#define WM8903_ADC_HPF_ENA 0x0010 /* ADC_HPF_ENA */ +#define WM8903_ADC_HPF_ENA_MASK 0x0010 /* ADC_HPF_ENA */ +#define WM8903_ADC_HPF_ENA_SHIFT 4 /* ADC_HPF_ENA */ +#define WM8903_ADC_HPF_ENA_WIDTH 1 /* ADC_HPF_ENA */ +#define WM8903_ADCL_DATINV 0x0002 /* ADCL_DATINV */ +#define WM8903_ADCL_DATINV_MASK 0x0002 /* ADCL_DATINV */ +#define WM8903_ADCL_DATINV_SHIFT 1 /* ADCL_DATINV */ +#define WM8903_ADCL_DATINV_WIDTH 1 /* ADCL_DATINV */ +#define WM8903_ADCR_DATINV 0x0001 /* ADCR_DATINV */ +#define WM8903_ADCR_DATINV_MASK 0x0001 /* ADCR_DATINV */ +#define WM8903_ADCR_DATINV_SHIFT 0 /* ADCR_DATINV */ +#define WM8903_ADCR_DATINV_WIDTH 1 /* ADCR_DATINV */ + +/* + * R39 (0x27) - Digital Microphone 0 + */ +#define WM8903_DIGMIC_MODE_SEL 0x0100 /* DIGMIC_MODE_SEL */ +#define WM8903_DIGMIC_MODE_SEL_MASK 0x0100 /* DIGMIC_MODE_SEL */ +#define WM8903_DIGMIC_MODE_SEL_SHIFT 8 /* DIGMIC_MODE_SEL */ +#define WM8903_DIGMIC_MODE_SEL_WIDTH 1 /* DIGMIC_MODE_SEL */ +#define WM8903_DIGMIC_CLK_SEL_L_MASK 0x00C0 /* DIGMIC_CLK_SEL_L - [7:6] */ +#define WM8903_DIGMIC_CLK_SEL_L_SHIFT 6 /* DIGMIC_CLK_SEL_L - [7:6] */ +#define WM8903_DIGMIC_CLK_SEL_L_WIDTH 2 /* DIGMIC_CLK_SEL_L - [7:6] */ +#define WM8903_DIGMIC_CLK_SEL_R_MASK 0x0030 /* DIGMIC_CLK_SEL_R - [5:4] */ +#define WM8903_DIGMIC_CLK_SEL_R_SHIFT 4 /* DIGMIC_CLK_SEL_R - [5:4] */ +#define WM8903_DIGMIC_CLK_SEL_R_WIDTH 2 /* DIGMIC_CLK_SEL_R - [5:4] */ +#define WM8903_DIGMIC_CLK_SEL_RT_MASK 0x000C /* DIGMIC_CLK_SEL_RT - [3:2] */ +#define WM8903_DIGMIC_CLK_SEL_RT_SHIFT 2 /* DIGMIC_CLK_SEL_RT - [3:2] */ +#define WM8903_DIGMIC_CLK_SEL_RT_WIDTH 2 /* DIGMIC_CLK_SEL_RT - [3:2] */ +#define WM8903_DIGMIC_CLK_SEL_MASK 0x0003 /* DIGMIC_CLK_SEL - [1:0] */ +#define WM8903_DIGMIC_CLK_SEL_SHIFT 0 /* DIGMIC_CLK_SEL - [1:0] */ +#define WM8903_DIGMIC_CLK_SEL_WIDTH 2 /* DIGMIC_CLK_SEL - [1:0] */ + +/* + * R40 (0x28) - DRC 0 + */ +#define WM8903_DRC_ENA 0x8000 /* DRC_ENA */ +#define WM8903_DRC_ENA_MASK 0x8000 /* DRC_ENA */ +#define WM8903_DRC_ENA_SHIFT 15 /* DRC_ENA */ +#define WM8903_DRC_ENA_WIDTH 1 /* DRC_ENA */ +#define WM8903_DRC_THRESH_HYST_MASK 0x1800 /* DRC_THRESH_HYST - [12:11] */ +#define WM8903_DRC_THRESH_HYST_SHIFT 11 /* DRC_THRESH_HYST - [12:11] */ +#define WM8903_DRC_THRESH_HYST_WIDTH 2 /* DRC_THRESH_HYST - [12:11] */ +#define WM8903_DRC_STARTUP_GAIN_MASK 0x07C0 /* DRC_STARTUP_GAIN - [10:6] */ +#define WM8903_DRC_STARTUP_GAIN_SHIFT 6 /* DRC_STARTUP_GAIN - [10:6] */ +#define WM8903_DRC_STARTUP_GAIN_WIDTH 5 /* DRC_STARTUP_GAIN - [10:6] */ +#define WM8903_DRC_FF_DELAY 0x0020 /* DRC_FF_DELAY */ +#define WM8903_DRC_FF_DELAY_MASK 0x0020 /* DRC_FF_DELAY */ +#define WM8903_DRC_FF_DELAY_SHIFT 5 /* DRC_FF_DELAY */ +#define WM8903_DRC_FF_DELAY_WIDTH 1 /* DRC_FF_DELAY */ +#define WM8903_DRC_SMOOTH_ENA 0x0008 /* DRC_SMOOTH_ENA */ +#define WM8903_DRC_SMOOTH_ENA_MASK 0x0008 /* DRC_SMOOTH_ENA */ +#define WM8903_DRC_SMOOTH_ENA_SHIFT 3 /* DRC_SMOOTH_ENA */ +#define WM8903_DRC_SMOOTH_ENA_WIDTH 1 /* DRC_SMOOTH_ENA */ +#define WM8903_DRC_QR_ENA 0x0004 /* DRC_QR_ENA */ +#define WM8903_DRC_QR_ENA_MASK 0x0004 /* DRC_QR_ENA */ +#define WM8903_DRC_QR_ENA_SHIFT 2 /* DRC_QR_ENA */ +#define WM8903_DRC_QR_ENA_WIDTH 1 /* DRC_QR_ENA */ +#define WM8903_DRC_ANTICLIP_ENA 0x0002 /* DRC_ANTICLIP_ENA */ +#define WM8903_DRC_ANTICLIP_ENA_MASK 0x0002 /* DRC_ANTICLIP_ENA */ +#define WM8903_DRC_ANTICLIP_ENA_SHIFT 1 /* DRC_ANTICLIP_ENA */ +#define WM8903_DRC_ANTICLIP_ENA_WIDTH 1 /* DRC_ANTICLIP_ENA */ +#define WM8903_DRC_HYST_ENA 0x0001 /* DRC_HYST_ENA */ +#define WM8903_DRC_HYST_ENA_MASK 0x0001 /* DRC_HYST_ENA */ +#define WM8903_DRC_HYST_ENA_SHIFT 0 /* DRC_HYST_ENA */ +#define WM8903_DRC_HYST_ENA_WIDTH 1 /* DRC_HYST_ENA */ + +/* + * R41 (0x29) - DRC 1 + */ +#define WM8903_DRC_ATTACK_RATE_MASK 0xF000 /* DRC_ATTACK_RATE - [15:12] */ +#define WM8903_DRC_ATTACK_RATE_SHIFT 12 /* DRC_ATTACK_RATE - [15:12] */ +#define WM8903_DRC_ATTACK_RATE_WIDTH 4 /* DRC_ATTACK_RATE - [15:12] */ +#define WM8903_DRC_DECAY_RATE_MASK 0x0F00 /* DRC_DECAY_RATE - [11:8] */ +#define WM8903_DRC_DECAY_RATE_SHIFT 8 /* DRC_DECAY_RATE - [11:8] */ +#define WM8903_DRC_DECAY_RATE_WIDTH 4 /* DRC_DECAY_RATE - [11:8] */ +#define WM8903_DRC_THRESH_QR_MASK 0x00C0 /* DRC_THRESH_QR - [7:6] */ +#define WM8903_DRC_THRESH_QR_SHIFT 6 /* DRC_THRESH_QR - [7:6] */ +#define WM8903_DRC_THRESH_QR_WIDTH 2 /* DRC_THRESH_QR - [7:6] */ +#define WM8903_DRC_RATE_QR_MASK 0x0030 /* DRC_RATE_QR - [5:4] */ +#define WM8903_DRC_RATE_QR_SHIFT 4 /* DRC_RATE_QR - [5:4] */ +#define WM8903_DRC_RATE_QR_WIDTH 2 /* DRC_RATE_QR - [5:4] */ +#define WM8903_DRC_MINGAIN_MASK 0x000C /* DRC_MINGAIN - [3:2] */ +#define WM8903_DRC_MINGAIN_SHIFT 2 /* DRC_MINGAIN - [3:2] */ +#define WM8903_DRC_MINGAIN_WIDTH 2 /* DRC_MINGAIN - [3:2] */ +#define WM8903_DRC_MAXGAIN_MASK 0x0003 /* DRC_MAXGAIN - [1:0] */ +#define WM8903_DRC_MAXGAIN_SHIFT 0 /* DRC_MAXGAIN - [1:0] */ +#define WM8903_DRC_MAXGAIN_WIDTH 2 /* DRC_MAXGAIN - [1:0] */ + +/* + * R42 (0x2A) - DRC 2 + */ +#define WM8903_DRC_R0_SLOPE_COMP_MASK 0x0038 /* DRC_R0_SLOPE_COMP - [5:3] */ +#define WM8903_DRC_R0_SLOPE_COMP_SHIFT 3 /* DRC_R0_SLOPE_COMP - [5:3] */ +#define WM8903_DRC_R0_SLOPE_COMP_WIDTH 3 /* DRC_R0_SLOPE_COMP - [5:3] */ +#define WM8903_DRC_R1_SLOPE_COMP_MASK 0x0007 /* DRC_R1_SLOPE_COMP - [2:0] */ +#define WM8903_DRC_R1_SLOPE_COMP_SHIFT 0 /* DRC_R1_SLOPE_COMP - [2:0] */ +#define WM8903_DRC_R1_SLOPE_COMP_WIDTH 3 /* DRC_R1_SLOPE_COMP - [2:0] */ + +/* + * R43 (0x2B) - DRC 3 + */ +#define WM8903_DRC_THRESH_COMP_MASK 0x07E0 /* DRC_THRESH_COMP - [10:5] */ +#define WM8903_DRC_THRESH_COMP_SHIFT 5 /* DRC_THRESH_COMP - [10:5] */ +#define WM8903_DRC_THRESH_COMP_WIDTH 6 /* DRC_THRESH_COMP - [10:5] */ +#define WM8903_DRC_AMP_COMP_MASK 0x001F /* DRC_AMP_COMP - [4:0] */ +#define WM8903_DRC_AMP_COMP_SHIFT 0 /* DRC_AMP_COMP - [4:0] */ +#define WM8903_DRC_AMP_COMP_WIDTH 5 /* DRC_AMP_COMP - [4:0] */ + +/* + * R44 (0x2C) - Analogue Left Input 0 + */ +#define WM8903_LINMUTE 0x0080 /* LINMUTE */ +#define WM8903_LINMUTE_MASK 0x0080 /* LINMUTE */ +#define WM8903_LINMUTE_SHIFT 7 /* LINMUTE */ +#define WM8903_LINMUTE_WIDTH 1 /* LINMUTE */ +#define WM8903_LIN_VOL_MASK 0x001F /* LIN_VOL - [4:0] */ +#define WM8903_LIN_VOL_SHIFT 0 /* LIN_VOL - [4:0] */ +#define WM8903_LIN_VOL_WIDTH 5 /* LIN_VOL - [4:0] */ + +/* + * R45 (0x2D) - Analogue Right Input 0 + */ +#define WM8903_RINMUTE 0x0080 /* RINMUTE */ +#define WM8903_RINMUTE_MASK 0x0080 /* RINMUTE */ +#define WM8903_RINMUTE_SHIFT 7 /* RINMUTE */ +#define WM8903_RINMUTE_WIDTH 1 /* RINMUTE */ +#define WM8903_RIN_VOL_MASK 0x001F /* RIN_VOL - [4:0] */ +#define WM8903_RIN_VOL_SHIFT 0 /* RIN_VOL - [4:0] */ +#define WM8903_RIN_VOL_WIDTH 5 /* RIN_VOL - [4:0] */ + +/* + * R46 (0x2E) - Analogue Left Input 1 + */ +#define WM8903_INL_CM_ENA 0x0040 /* INL_CM_ENA */ +#define WM8903_INL_CM_ENA_MASK 0x0040 /* INL_CM_ENA */ +#define WM8903_INL_CM_ENA_SHIFT 6 /* INL_CM_ENA */ +#define WM8903_INL_CM_ENA_WIDTH 1 /* INL_CM_ENA */ +#define WM8903_L_IP_SEL_N_MASK 0x0030 /* L_IP_SEL_N - [5:4] */ +#define WM8903_L_IP_SEL_N_SHIFT 4 /* L_IP_SEL_N - [5:4] */ +#define WM8903_L_IP_SEL_N_WIDTH 2 /* L_IP_SEL_N - [5:4] */ +#define WM8903_L_IP_SEL_P_MASK 0x000C /* L_IP_SEL_P - [3:2] */ +#define WM8903_L_IP_SEL_P_SHIFT 2 /* L_IP_SEL_P - [3:2] */ +#define WM8903_L_IP_SEL_P_WIDTH 2 /* L_IP_SEL_P - [3:2] */ +#define WM8903_L_MODE_MASK 0x0003 /* L_MODE - [1:0] */ +#define WM8903_L_MODE_SHIFT 0 /* L_MODE - [1:0] */ +#define WM8903_L_MODE_WIDTH 2 /* L_MODE - [1:0] */ + +/* + * R47 (0x2F) - Analogue Right Input 1 + */ +#define WM8903_INR_CM_ENA 0x0040 /* INR_CM_ENA */ +#define WM8903_INR_CM_ENA_MASK 0x0040 /* INR_CM_ENA */ +#define WM8903_INR_CM_ENA_SHIFT 6 /* INR_CM_ENA */ +#define WM8903_INR_CM_ENA_WIDTH 1 /* INR_CM_ENA */ +#define WM8903_R_IP_SEL_N_MASK 0x0030 /* R_IP_SEL_N - [5:4] */ +#define WM8903_R_IP_SEL_N_SHIFT 4 /* R_IP_SEL_N - [5:4] */ +#define WM8903_R_IP_SEL_N_WIDTH 2 /* R_IP_SEL_N - [5:4] */ +#define WM8903_R_IP_SEL_P_MASK 0x000C /* R_IP_SEL_P - [3:2] */ +#define WM8903_R_IP_SEL_P_SHIFT 2 /* R_IP_SEL_P - [3:2] */ +#define WM8903_R_IP_SEL_P_WIDTH 2 /* R_IP_SEL_P - [3:2] */ +#define WM8903_R_MODE_MASK 0x0003 /* R_MODE - [1:0] */ +#define WM8903_R_MODE_SHIFT 0 /* R_MODE - [1:0] */ +#define WM8903_R_MODE_WIDTH 2 /* R_MODE - [1:0] */ + +/* + * R50 (0x32) - Analogue Left Mix 0 + */ +#define WM8903_DACL_TO_MIXOUTL 0x0008 /* DACL_TO_MIXOUTL */ +#define WM8903_DACL_TO_MIXOUTL_MASK 0x0008 /* DACL_TO_MIXOUTL */ +#define WM8903_DACL_TO_MIXOUTL_SHIFT 3 /* DACL_TO_MIXOUTL */ +#define WM8903_DACL_TO_MIXOUTL_WIDTH 1 /* DACL_TO_MIXOUTL */ +#define WM8903_DACR_TO_MIXOUTL 0x0004 /* DACR_TO_MIXOUTL */ +#define WM8903_DACR_TO_MIXOUTL_MASK 0x0004 /* DACR_TO_MIXOUTL */ +#define WM8903_DACR_TO_MIXOUTL_SHIFT 2 /* DACR_TO_MIXOUTL */ +#define WM8903_DACR_TO_MIXOUTL_WIDTH 1 /* DACR_TO_MIXOUTL */ +#define WM8903_BYPASSL_TO_MIXOUTL 0x0002 /* BYPASSL_TO_MIXOUTL */ +#define WM8903_BYPASSL_TO_MIXOUTL_MASK 0x0002 /* BYPASSL_TO_MIXOUTL */ +#define WM8903_BYPASSL_TO_MIXOUTL_SHIFT 1 /* BYPASSL_TO_MIXOUTL */ +#define WM8903_BYPASSL_TO_MIXOUTL_WIDTH 1 /* BYPASSL_TO_MIXOUTL */ +#define WM8903_BYPASSR_TO_MIXOUTL 0x0001 /* BYPASSR_TO_MIXOUTL */ +#define WM8903_BYPASSR_TO_MIXOUTL_MASK 0x0001 /* BYPASSR_TO_MIXOUTL */ +#define WM8903_BYPASSR_TO_MIXOUTL_SHIFT 0 /* BYPASSR_TO_MIXOUTL */ +#define WM8903_BYPASSR_TO_MIXOUTL_WIDTH 1 /* BYPASSR_TO_MIXOUTL */ + +/* + * R51 (0x33) - Analogue Right Mix 0 + */ +#define WM8903_DACL_TO_MIXOUTR 0x0008 /* DACL_TO_MIXOUTR */ +#define WM8903_DACL_TO_MIXOUTR_MASK 0x0008 /* DACL_TO_MIXOUTR */ +#define WM8903_DACL_TO_MIXOUTR_SHIFT 3 /* DACL_TO_MIXOUTR */ +#define WM8903_DACL_TO_MIXOUTR_WIDTH 1 /* DACL_TO_MIXOUTR */ +#define WM8903_DACR_TO_MIXOUTR 0x0004 /* DACR_TO_MIXOUTR */ +#define WM8903_DACR_TO_MIXOUTR_MASK 0x0004 /* DACR_TO_MIXOUTR */ +#define WM8903_DACR_TO_MIXOUTR_SHIFT 2 /* DACR_TO_MIXOUTR */ +#define WM8903_DACR_TO_MIXOUTR_WIDTH 1 /* DACR_TO_MIXOUTR */ +#define WM8903_BYPASSL_TO_MIXOUTR 0x0002 /* BYPASSL_TO_MIXOUTR */ +#define WM8903_BYPASSL_TO_MIXOUTR_MASK 0x0002 /* BYPASSL_TO_MIXOUTR */ +#define WM8903_BYPASSL_TO_MIXOUTR_SHIFT 1 /* BYPASSL_TO_MIXOUTR */ +#define WM8903_BYPASSL_TO_MIXOUTR_WIDTH 1 /* BYPASSL_TO_MIXOUTR */ +#define WM8903_BYPASSR_TO_MIXOUTR 0x0001 /* BYPASSR_TO_MIXOUTR */ +#define WM8903_BYPASSR_TO_MIXOUTR_MASK 0x0001 /* BYPASSR_TO_MIXOUTR */ +#define WM8903_BYPASSR_TO_MIXOUTR_SHIFT 0 /* BYPASSR_TO_MIXOUTR */ +#define WM8903_BYPASSR_TO_MIXOUTR_WIDTH 1 /* BYPASSR_TO_MIXOUTR */ + +/* + * R52 (0x34) - Analogue Spk Mix Left 0 + */ +#define WM8903_DACL_TO_MIXSPKL 0x0008 /* DACL_TO_MIXSPKL */ +#define WM8903_DACL_TO_MIXSPKL_MASK 0x0008 /* DACL_TO_MIXSPKL */ +#define WM8903_DACL_TO_MIXSPKL_SHIFT 3 /* DACL_TO_MIXSPKL */ +#define WM8903_DACL_TO_MIXSPKL_WIDTH 1 /* DACL_TO_MIXSPKL */ +#define WM8903_DACR_TO_MIXSPKL 0x0004 /* DACR_TO_MIXSPKL */ +#define WM8903_DACR_TO_MIXSPKL_MASK 0x0004 /* DACR_TO_MIXSPKL */ +#define WM8903_DACR_TO_MIXSPKL_SHIFT 2 /* DACR_TO_MIXSPKL */ +#define WM8903_DACR_TO_MIXSPKL_WIDTH 1 /* DACR_TO_MIXSPKL */ +#define WM8903_BYPASSL_TO_MIXSPKL 0x0002 /* BYPASSL_TO_MIXSPKL */ +#define WM8903_BYPASSL_TO_MIXSPKL_MASK 0x0002 /* BYPASSL_TO_MIXSPKL */ +#define WM8903_BYPASSL_TO_MIXSPKL_SHIFT 1 /* BYPASSL_TO_MIXSPKL */ +#define WM8903_BYPASSL_TO_MIXSPKL_WIDTH 1 /* BYPASSL_TO_MIXSPKL */ +#define WM8903_BYPASSR_TO_MIXSPKL 0x0001 /* BYPASSR_TO_MIXSPKL */ +#define WM8903_BYPASSR_TO_MIXSPKL_MASK 0x0001 /* BYPASSR_TO_MIXSPKL */ +#define WM8903_BYPASSR_TO_MIXSPKL_SHIFT 0 /* BYPASSR_TO_MIXSPKL */ +#define WM8903_BYPASSR_TO_MIXSPKL_WIDTH 1 /* BYPASSR_TO_MIXSPKL */ + +/* + * R53 (0x35) - Analogue Spk Mix Left 1 + */ +#define WM8903_DACL_MIXSPKL_VOL 0x0008 /* DACL_MIXSPKL_VOL */ +#define WM8903_DACL_MIXSPKL_VOL_MASK 0x0008 /* DACL_MIXSPKL_VOL */ +#define WM8903_DACL_MIXSPKL_VOL_SHIFT 3 /* DACL_MIXSPKL_VOL */ +#define WM8903_DACL_MIXSPKL_VOL_WIDTH 1 /* DACL_MIXSPKL_VOL */ +#define WM8903_DACR_MIXSPKL_VOL 0x0004 /* DACR_MIXSPKL_VOL */ +#define WM8903_DACR_MIXSPKL_VOL_MASK 0x0004 /* DACR_MIXSPKL_VOL */ +#define WM8903_DACR_MIXSPKL_VOL_SHIFT 2 /* DACR_MIXSPKL_VOL */ +#define WM8903_DACR_MIXSPKL_VOL_WIDTH 1 /* DACR_MIXSPKL_VOL */ +#define WM8903_BYPASSL_MIXSPKL_VOL 0x0002 /* BYPASSL_MIXSPKL_VOL */ +#define WM8903_BYPASSL_MIXSPKL_VOL_MASK 0x0002 /* BYPASSL_MIXSPKL_VOL */ +#define WM8903_BYPASSL_MIXSPKL_VOL_SHIFT 1 /* BYPASSL_MIXSPKL_VOL */ +#define WM8903_BYPASSL_MIXSPKL_VOL_WIDTH 1 /* BYPASSL_MIXSPKL_VOL */ +#define WM8903_BYPASSR_MIXSPKL_VOL 0x0001 /* BYPASSR_MIXSPKL_VOL */ +#define WM8903_BYPASSR_MIXSPKL_VOL_MASK 0x0001 /* BYPASSR_MIXSPKL_VOL */ +#define WM8903_BYPASSR_MIXSPKL_VOL_SHIFT 0 /* BYPASSR_MIXSPKL_VOL */ +#define WM8903_BYPASSR_MIXSPKL_VOL_WIDTH 1 /* BYPASSR_MIXSPKL_VOL */ + +/* + * R54 (0x36) - Analogue Spk Mix Right 0 + */ +#define WM8903_DACL_TO_MIXSPKR 0x0008 /* DACL_TO_MIXSPKR */ +#define WM8903_DACL_TO_MIXSPKR_MASK 0x0008 /* DACL_TO_MIXSPKR */ +#define WM8903_DACL_TO_MIXSPKR_SHIFT 3 /* DACL_TO_MIXSPKR */ +#define WM8903_DACL_TO_MIXSPKR_WIDTH 1 /* DACL_TO_MIXSPKR */ +#define WM8903_DACR_TO_MIXSPKR 0x0004 /* DACR_TO_MIXSPKR */ +#define WM8903_DACR_TO_MIXSPKR_MASK 0x0004 /* DACR_TO_MIXSPKR */ +#define WM8903_DACR_TO_MIXSPKR_SHIFT 2 /* DACR_TO_MIXSPKR */ +#define WM8903_DACR_TO_MIXSPKR_WIDTH 1 /* DACR_TO_MIXSPKR */ +#define WM8903_BYPASSL_TO_MIXSPKR 0x0002 /* BYPASSL_TO_MIXSPKR */ +#define WM8903_BYPASSL_TO_MIXSPKR_MASK 0x0002 /* BYPASSL_TO_MIXSPKR */ +#define WM8903_BYPASSL_TO_MIXSPKR_SHIFT 1 /* BYPASSL_TO_MIXSPKR */ +#define WM8903_BYPASSL_TO_MIXSPKR_WIDTH 1 /* BYPASSL_TO_MIXSPKR */ +#define WM8903_BYPASSR_TO_MIXSPKR 0x0001 /* BYPASSR_TO_MIXSPKR */ +#define WM8903_BYPASSR_TO_MIXSPKR_MASK 0x0001 /* BYPASSR_TO_MIXSPKR */ +#define WM8903_BYPASSR_TO_MIXSPKR_SHIFT 0 /* BYPASSR_TO_MIXSPKR */ +#define WM8903_BYPASSR_TO_MIXSPKR_WIDTH 1 /* BYPASSR_TO_MIXSPKR */ + +/* + * R55 (0x37) - Analogue Spk Mix Right 1 + */ +#define WM8903_DACL_MIXSPKR_VOL 0x0008 /* DACL_MIXSPKR_VOL */ +#define WM8903_DACL_MIXSPKR_VOL_MASK 0x0008 /* DACL_MIXSPKR_VOL */ +#define WM8903_DACL_MIXSPKR_VOL_SHIFT 3 /* DACL_MIXSPKR_VOL */ +#define WM8903_DACL_MIXSPKR_VOL_WIDTH 1 /* DACL_MIXSPKR_VOL */ +#define WM8903_DACR_MIXSPKR_VOL 0x0004 /* DACR_MIXSPKR_VOL */ +#define WM8903_DACR_MIXSPKR_VOL_MASK 0x0004 /* DACR_MIXSPKR_VOL */ +#define WM8903_DACR_MIXSPKR_VOL_SHIFT 2 /* DACR_MIXSPKR_VOL */ +#define WM8903_DACR_MIXSPKR_VOL_WIDTH 1 /* DACR_MIXSPKR_VOL */ +#define WM8903_BYPASSL_MIXSPKR_VOL 0x0002 /* BYPASSL_MIXSPKR_VOL */ +#define WM8903_BYPASSL_MIXSPKR_VOL_MASK 0x0002 /* BYPASSL_MIXSPKR_VOL */ +#define WM8903_BYPASSL_MIXSPKR_VOL_SHIFT 1 /* BYPASSL_MIXSPKR_VOL */ +#define WM8903_BYPASSL_MIXSPKR_VOL_WIDTH 1 /* BYPASSL_MIXSPKR_VOL */ +#define WM8903_BYPASSR_MIXSPKR_VOL 0x0001 /* BYPASSR_MIXSPKR_VOL */ +#define WM8903_BYPASSR_MIXSPKR_VOL_MASK 0x0001 /* BYPASSR_MIXSPKR_VOL */ +#define WM8903_BYPASSR_MIXSPKR_VOL_SHIFT 0 /* BYPASSR_MIXSPKR_VOL */ +#define WM8903_BYPASSR_MIXSPKR_VOL_WIDTH 1 /* BYPASSR_MIXSPKR_VOL */ + +/* + * R57 (0x39) - Analogue OUT1 Left + */ +#define WM8903_HPL_MUTE 0x0100 /* HPL_MUTE */ +#define WM8903_HPL_MUTE_MASK 0x0100 /* HPL_MUTE */ +#define WM8903_HPL_MUTE_SHIFT 8 /* HPL_MUTE */ +#define WM8903_HPL_MUTE_WIDTH 1 /* HPL_MUTE */ +#define WM8903_HPOUTVU 0x0080 /* HPOUTVU */ +#define WM8903_HPOUTVU_MASK 0x0080 /* HPOUTVU */ +#define WM8903_HPOUTVU_SHIFT 7 /* HPOUTVU */ +#define WM8903_HPOUTVU_WIDTH 1 /* HPOUTVU */ +#define WM8903_HPOUTLZC 0x0040 /* HPOUTLZC */ +#define WM8903_HPOUTLZC_MASK 0x0040 /* HPOUTLZC */ +#define WM8903_HPOUTLZC_SHIFT 6 /* HPOUTLZC */ +#define WM8903_HPOUTLZC_WIDTH 1 /* HPOUTLZC */ +#define WM8903_HPOUTL_VOL_MASK 0x003F /* HPOUTL_VOL - [5:0] */ +#define WM8903_HPOUTL_VOL_SHIFT 0 /* HPOUTL_VOL - [5:0] */ +#define WM8903_HPOUTL_VOL_WIDTH 6 /* HPOUTL_VOL - [5:0] */ + +/* + * R58 (0x3A) - Analogue OUT1 Right + */ +#define WM8903_HPR_MUTE 0x0100 /* HPR_MUTE */ +#define WM8903_HPR_MUTE_MASK 0x0100 /* HPR_MUTE */ +#define WM8903_HPR_MUTE_SHIFT 8 /* HPR_MUTE */ +#define WM8903_HPR_MUTE_WIDTH 1 /* HPR_MUTE */ +#define WM8903_HPOUTVU 0x0080 /* HPOUTVU */ +#define WM8903_HPOUTVU_MASK 0x0080 /* HPOUTVU */ +#define WM8903_HPOUTVU_SHIFT 7 /* HPOUTVU */ +#define WM8903_HPOUTVU_WIDTH 1 /* HPOUTVU */ +#define WM8903_HPOUTRZC 0x0040 /* HPOUTRZC */ +#define WM8903_HPOUTRZC_MASK 0x0040 /* HPOUTRZC */ +#define WM8903_HPOUTRZC_SHIFT 6 /* HPOUTRZC */ +#define WM8903_HPOUTRZC_WIDTH 1 /* HPOUTRZC */ +#define WM8903_HPOUTR_VOL_MASK 0x003F /* HPOUTR_VOL - [5:0] */ +#define WM8903_HPOUTR_VOL_SHIFT 0 /* HPOUTR_VOL - [5:0] */ +#define WM8903_HPOUTR_VOL_WIDTH 6 /* HPOUTR_VOL - [5:0] */ + +/* + * R59 (0x3B) - Analogue OUT2 Left + */ +#define WM8903_LINEOUTL_MUTE 0x0100 /* LINEOUTL_MUTE */ +#define WM8903_LINEOUTL_MUTE_MASK 0x0100 /* LINEOUTL_MUTE */ +#define WM8903_LINEOUTL_MUTE_SHIFT 8 /* LINEOUTL_MUTE */ +#define WM8903_LINEOUTL_MUTE_WIDTH 1 /* LINEOUTL_MUTE */ +#define WM8903_LINEOUTVU 0x0080 /* LINEOUTVU */ +#define WM8903_LINEOUTVU_MASK 0x0080 /* LINEOUTVU */ +#define WM8903_LINEOUTVU_SHIFT 7 /* LINEOUTVU */ +#define WM8903_LINEOUTVU_WIDTH 1 /* LINEOUTVU */ +#define WM8903_LINEOUTLZC 0x0040 /* LINEOUTLZC */ +#define WM8903_LINEOUTLZC_MASK 0x0040 /* LINEOUTLZC */ +#define WM8903_LINEOUTLZC_SHIFT 6 /* LINEOUTLZC */ +#define WM8903_LINEOUTLZC_WIDTH 1 /* LINEOUTLZC */ +#define WM8903_LINEOUTL_VOL_MASK 0x003F /* LINEOUTL_VOL - [5:0] */ +#define WM8903_LINEOUTL_VOL_SHIFT 0 /* LINEOUTL_VOL - [5:0] */ +#define WM8903_LINEOUTL_VOL_WIDTH 6 /* LINEOUTL_VOL - [5:0] */ + +/* + * R60 (0x3C) - Analogue OUT2 Right + */ +#define WM8903_LINEOUTR_MUTE 0x0100 /* LINEOUTR_MUTE */ +#define WM8903_LINEOUTR_MUTE_MASK 0x0100 /* LINEOUTR_MUTE */ +#define WM8903_LINEOUTR_MUTE_SHIFT 8 /* LINEOUTR_MUTE */ +#define WM8903_LINEOUTR_MUTE_WIDTH 1 /* LINEOUTR_MUTE */ +#define WM8903_LINEOUTVU 0x0080 /* LINEOUTVU */ +#define WM8903_LINEOUTVU_MASK 0x0080 /* LINEOUTVU */ +#define WM8903_LINEOUTVU_SHIFT 7 /* LINEOUTVU */ +#define WM8903_LINEOUTVU_WIDTH 1 /* LINEOUTVU */ +#define WM8903_LINEOUTRZC 0x0040 /* LINEOUTRZC */ +#define WM8903_LINEOUTRZC_MASK 0x0040 /* LINEOUTRZC */ +#define WM8903_LINEOUTRZC_SHIFT 6 /* LINEOUTRZC */ +#define WM8903_LINEOUTRZC_WIDTH 1 /* LINEOUTRZC */ +#define WM8903_LINEOUTR_VOL_MASK 0x003F /* LINEOUTR_VOL - [5:0] */ +#define WM8903_LINEOUTR_VOL_SHIFT 0 /* LINEOUTR_VOL - [5:0] */ +#define WM8903_LINEOUTR_VOL_WIDTH 6 /* LINEOUTR_VOL - [5:0] */ + +/* + * R62 (0x3E) - Analogue OUT3 Left + */ +#define WM8903_SPKL_MUTE 0x0100 /* SPKL_MUTE */ +#define WM8903_SPKL_MUTE_MASK 0x0100 /* SPKL_MUTE */ +#define WM8903_SPKL_MUTE_SHIFT 8 /* SPKL_MUTE */ +#define WM8903_SPKL_MUTE_WIDTH 1 /* SPKL_MUTE */ +#define WM8903_SPKVU 0x0080 /* SPKVU */ +#define WM8903_SPKVU_MASK 0x0080 /* SPKVU */ +#define WM8903_SPKVU_SHIFT 7 /* SPKVU */ +#define WM8903_SPKVU_WIDTH 1 /* SPKVU */ +#define WM8903_SPKLZC 0x0040 /* SPKLZC */ +#define WM8903_SPKLZC_MASK 0x0040 /* SPKLZC */ +#define WM8903_SPKLZC_SHIFT 6 /* SPKLZC */ +#define WM8903_SPKLZC_WIDTH 1 /* SPKLZC */ +#define WM8903_SPKL_VOL_MASK 0x003F /* SPKL_VOL - [5:0] */ +#define WM8903_SPKL_VOL_SHIFT 0 /* SPKL_VOL - [5:0] */ +#define WM8903_SPKL_VOL_WIDTH 6 /* SPKL_VOL - [5:0] */ + +/* + * R63 (0x3F) - Analogue OUT3 Right + */ +#define WM8903_SPKR_MUTE 0x0100 /* SPKR_MUTE */ +#define WM8903_SPKR_MUTE_MASK 0x0100 /* SPKR_MUTE */ +#define WM8903_SPKR_MUTE_SHIFT 8 /* SPKR_MUTE */ +#define WM8903_SPKR_MUTE_WIDTH 1 /* SPKR_MUTE */ +#define WM8903_SPKVU 0x0080 /* SPKVU */ +#define WM8903_SPKVU_MASK 0x0080 /* SPKVU */ +#define WM8903_SPKVU_SHIFT 7 /* SPKVU */ +#define WM8903_SPKVU_WIDTH 1 /* SPKVU */ +#define WM8903_SPKRZC 0x0040 /* SPKRZC */ +#define WM8903_SPKRZC_MASK 0x0040 /* SPKRZC */ +#define WM8903_SPKRZC_SHIFT 6 /* SPKRZC */ +#define WM8903_SPKRZC_WIDTH 1 /* SPKRZC */ +#define WM8903_SPKR_VOL_MASK 0x003F /* SPKR_VOL - [5:0] */ +#define WM8903_SPKR_VOL_SHIFT 0 /* SPKR_VOL - [5:0] */ +#define WM8903_SPKR_VOL_WIDTH 6 /* SPKR_VOL - [5:0] */ + +/* + * R65 (0x41) - Analogue SPK Output Control 0 + */ +#define WM8903_SPK_DISCHARGE 0x0002 /* SPK_DISCHARGE */ +#define WM8903_SPK_DISCHARGE_MASK 0x0002 /* SPK_DISCHARGE */ +#define WM8903_SPK_DISCHARGE_SHIFT 1 /* SPK_DISCHARGE */ +#define WM8903_SPK_DISCHARGE_WIDTH 1 /* SPK_DISCHARGE */ +#define WM8903_VROI 0x0001 /* VROI */ +#define WM8903_VROI_MASK 0x0001 /* VROI */ +#define WM8903_VROI_SHIFT 0 /* VROI */ +#define WM8903_VROI_WIDTH 1 /* VROI */ + +/* + * R67 (0x43) - DC Servo 0 + */ +#define WM8903_DCS_MASTER_ENA 0x0010 /* DCS_MASTER_ENA */ +#define WM8903_DCS_MASTER_ENA_MASK 0x0010 /* DCS_MASTER_ENA */ +#define WM8903_DCS_MASTER_ENA_SHIFT 4 /* DCS_MASTER_ENA */ +#define WM8903_DCS_MASTER_ENA_WIDTH 1 /* DCS_MASTER_ENA */ +#define WM8903_DCS_ENA_MASK 0x000F /* DCS_ENA - [3:0] */ +#define WM8903_DCS_ENA_SHIFT 0 /* DCS_ENA - [3:0] */ +#define WM8903_DCS_ENA_WIDTH 4 /* DCS_ENA - [3:0] */ + +/* + * R69 (0x45) - DC Servo 2 + */ +#define WM8903_DCS_MODE_MASK 0x0003 /* DCS_MODE - [1:0] */ +#define WM8903_DCS_MODE_SHIFT 0 /* DCS_MODE - [1:0] */ +#define WM8903_DCS_MODE_WIDTH 2 /* DCS_MODE - [1:0] */ + +/* + * R90 (0x5A) - Analogue HP 0 + */ +#define WM8903_HPL_RMV_SHORT 0x0080 /* HPL_RMV_SHORT */ +#define WM8903_HPL_RMV_SHORT_MASK 0x0080 /* HPL_RMV_SHORT */ +#define WM8903_HPL_RMV_SHORT_SHIFT 7 /* HPL_RMV_SHORT */ +#define WM8903_HPL_RMV_SHORT_WIDTH 1 /* HPL_RMV_SHORT */ +#define WM8903_HPL_ENA_OUTP 0x0040 /* HPL_ENA_OUTP */ +#define WM8903_HPL_ENA_OUTP_MASK 0x0040 /* HPL_ENA_OUTP */ +#define WM8903_HPL_ENA_OUTP_SHIFT 6 /* HPL_ENA_OUTP */ +#define WM8903_HPL_ENA_OUTP_WIDTH 1 /* HPL_ENA_OUTP */ +#define WM8903_HPL_ENA_DLY 0x0020 /* HPL_ENA_DLY */ +#define WM8903_HPL_ENA_DLY_MASK 0x0020 /* HPL_ENA_DLY */ +#define WM8903_HPL_ENA_DLY_SHIFT 5 /* HPL_ENA_DLY */ +#define WM8903_HPL_ENA_DLY_WIDTH 1 /* HPL_ENA_DLY */ +#define WM8903_HPL_ENA 0x0010 /* HPL_ENA */ +#define WM8903_HPL_ENA_MASK 0x0010 /* HPL_ENA */ +#define WM8903_HPL_ENA_SHIFT 4 /* HPL_ENA */ +#define WM8903_HPL_ENA_WIDTH 1 /* HPL_ENA */ +#define WM8903_HPR_RMV_SHORT 0x0008 /* HPR_RMV_SHORT */ +#define WM8903_HPR_RMV_SHORT_MASK 0x0008 /* HPR_RMV_SHORT */ +#define WM8903_HPR_RMV_SHORT_SHIFT 3 /* HPR_RMV_SHORT */ +#define WM8903_HPR_RMV_SHORT_WIDTH 1 /* HPR_RMV_SHORT */ +#define WM8903_HPR_ENA_OUTP 0x0004 /* HPR_ENA_OUTP */ +#define WM8903_HPR_ENA_OUTP_MASK 0x0004 /* HPR_ENA_OUTP */ +#define WM8903_HPR_ENA_OUTP_SHIFT 2 /* HPR_ENA_OUTP */ +#define WM8903_HPR_ENA_OUTP_WIDTH 1 /* HPR_ENA_OUTP */ +#define WM8903_HPR_ENA_DLY 0x0002 /* HPR_ENA_DLY */ +#define WM8903_HPR_ENA_DLY_MASK 0x0002 /* HPR_ENA_DLY */ +#define WM8903_HPR_ENA_DLY_SHIFT 1 /* HPR_ENA_DLY */ +#define WM8903_HPR_ENA_DLY_WIDTH 1 /* HPR_ENA_DLY */ +#define WM8903_HPR_ENA 0x0001 /* HPR_ENA */ +#define WM8903_HPR_ENA_MASK 0x0001 /* HPR_ENA */ +#define WM8903_HPR_ENA_SHIFT 0 /* HPR_ENA */ +#define WM8903_HPR_ENA_WIDTH 1 /* HPR_ENA */ + +/* + * R94 (0x5E) - Analogue Lineout 0 + */ +#define WM8903_LINEOUTL_RMV_SHORT 0x0080 /* LINEOUTL_RMV_SHORT */ +#define WM8903_LINEOUTL_RMV_SHORT_MASK 0x0080 /* LINEOUTL_RMV_SHORT */ +#define WM8903_LINEOUTL_RMV_SHORT_SHIFT 7 /* LINEOUTL_RMV_SHORT */ +#define WM8903_LINEOUTL_RMV_SHORT_WIDTH 1 /* LINEOUTL_RMV_SHORT */ +#define WM8903_LINEOUTL_ENA_OUTP 0x0040 /* LINEOUTL_ENA_OUTP */ +#define WM8903_LINEOUTL_ENA_OUTP_MASK 0x0040 /* LINEOUTL_ENA_OUTP */ +#define WM8903_LINEOUTL_ENA_OUTP_SHIFT 6 /* LINEOUTL_ENA_OUTP */ +#define WM8903_LINEOUTL_ENA_OUTP_WIDTH 1 /* LINEOUTL_ENA_OUTP */ +#define WM8903_LINEOUTL_ENA_DLY 0x0020 /* LINEOUTL_ENA_DLY */ +#define WM8903_LINEOUTL_ENA_DLY_MASK 0x0020 /* LINEOUTL_ENA_DLY */ +#define WM8903_LINEOUTL_ENA_DLY_SHIFT 5 /* LINEOUTL_ENA_DLY */ +#define WM8903_LINEOUTL_ENA_DLY_WIDTH 1 /* LINEOUTL_ENA_DLY */ +#define WM8903_LINEOUTL_ENA 0x0010 /* LINEOUTL_ENA */ +#define WM8903_LINEOUTL_ENA_MASK 0x0010 /* LINEOUTL_ENA */ +#define WM8903_LINEOUTL_ENA_SHIFT 4 /* LINEOUTL_ENA */ +#define WM8903_LINEOUTL_ENA_WIDTH 1 /* LINEOUTL_ENA */ +#define WM8903_LINEOUTR_RMV_SHORT 0x0008 /* LINEOUTR_RMV_SHORT */ +#define WM8903_LINEOUTR_RMV_SHORT_MASK 0x0008 /* LINEOUTR_RMV_SHORT */ +#define WM8903_LINEOUTR_RMV_SHORT_SHIFT 3 /* LINEOUTR_RMV_SHORT */ +#define WM8903_LINEOUTR_RMV_SHORT_WIDTH 1 /* LINEOUTR_RMV_SHORT */ +#define WM8903_LINEOUTR_ENA_OUTP 0x0004 /* LINEOUTR_ENA_OUTP */ +#define WM8903_LINEOUTR_ENA_OUTP_MASK 0x0004 /* LINEOUTR_ENA_OUTP */ +#define WM8903_LINEOUTR_ENA_OUTP_SHIFT 2 /* LINEOUTR_ENA_OUTP */ +#define WM8903_LINEOUTR_ENA_OUTP_WIDTH 1 /* LINEOUTR_ENA_OUTP */ +#define WM8903_LINEOUTR_ENA_DLY 0x0002 /* LINEOUTR_ENA_DLY */ +#define WM8903_LINEOUTR_ENA_DLY_MASK 0x0002 /* LINEOUTR_ENA_DLY */ +#define WM8903_LINEOUTR_ENA_DLY_SHIFT 1 /* LINEOUTR_ENA_DLY */ +#define WM8903_LINEOUTR_ENA_DLY_WIDTH 1 /* LINEOUTR_ENA_DLY */ +#define WM8903_LINEOUTR_ENA 0x0001 /* LINEOUTR_ENA */ +#define WM8903_LINEOUTR_ENA_MASK 0x0001 /* LINEOUTR_ENA */ +#define WM8903_LINEOUTR_ENA_SHIFT 0 /* LINEOUTR_ENA */ +#define WM8903_LINEOUTR_ENA_WIDTH 1 /* LINEOUTR_ENA */ + +/* + * R98 (0x62) - Charge Pump 0 + */ +#define WM8903_CP_ENA 0x0001 /* CP_ENA */ +#define WM8903_CP_ENA_MASK 0x0001 /* CP_ENA */ +#define WM8903_CP_ENA_SHIFT 0 /* CP_ENA */ +#define WM8903_CP_ENA_WIDTH 1 /* CP_ENA */ + +/* + * R104 (0x68) - Class W 0 + */ +#define WM8903_CP_DYN_FREQ 0x0002 /* CP_DYN_FREQ */ +#define WM8903_CP_DYN_FREQ_MASK 0x0002 /* CP_DYN_FREQ */ +#define WM8903_CP_DYN_FREQ_SHIFT 1 /* CP_DYN_FREQ */ +#define WM8903_CP_DYN_FREQ_WIDTH 1 /* CP_DYN_FREQ */ +#define WM8903_CP_DYN_V 0x0001 /* CP_DYN_V */ +#define WM8903_CP_DYN_V_MASK 0x0001 /* CP_DYN_V */ +#define WM8903_CP_DYN_V_SHIFT 0 /* CP_DYN_V */ +#define WM8903_CP_DYN_V_WIDTH 1 /* CP_DYN_V */ + +/* + * R108 (0x6C) - Write Sequencer 0 + */ +#define WM8903_WSEQ_ENA 0x0100 /* WSEQ_ENA */ +#define WM8903_WSEQ_ENA_MASK 0x0100 /* WSEQ_ENA */ +#define WM8903_WSEQ_ENA_SHIFT 8 /* WSEQ_ENA */ +#define WM8903_WSEQ_ENA_WIDTH 1 /* WSEQ_ENA */ +#define WM8903_WSEQ_WRITE_INDEX_MASK 0x001F /* WSEQ_WRITE_INDEX - [4:0] */ +#define WM8903_WSEQ_WRITE_INDEX_SHIFT 0 /* WSEQ_WRITE_INDEX - [4:0] */ +#define WM8903_WSEQ_WRITE_INDEX_WIDTH 5 /* WSEQ_WRITE_INDEX - [4:0] */ + +/* + * R109 (0x6D) - Write Sequencer 1 + */ +#define WM8903_WSEQ_DATA_WIDTH_MASK 0x7000 /* WSEQ_DATA_WIDTH - [14:12] */ +#define WM8903_WSEQ_DATA_WIDTH_SHIFT 12 /* WSEQ_DATA_WIDTH - [14:12] */ +#define WM8903_WSEQ_DATA_WIDTH_WIDTH 3 /* WSEQ_DATA_WIDTH - [14:12] */ +#define WM8903_WSEQ_DATA_START_MASK 0x0F00 /* WSEQ_DATA_START - [11:8] */ +#define WM8903_WSEQ_DATA_START_SHIFT 8 /* WSEQ_DATA_START - [11:8] */ +#define WM8903_WSEQ_DATA_START_WIDTH 4 /* WSEQ_DATA_START - [11:8] */ +#define WM8903_WSEQ_ADDR_MASK 0x00FF /* WSEQ_ADDR - [7:0] */ +#define WM8903_WSEQ_ADDR_SHIFT 0 /* WSEQ_ADDR - [7:0] */ +#define WM8903_WSEQ_ADDR_WIDTH 8 /* WSEQ_ADDR - [7:0] */ + +/* + * R110 (0x6E) - Write Sequencer 2 + */ +#define WM8903_WSEQ_EOS 0x4000 /* WSEQ_EOS */ +#define WM8903_WSEQ_EOS_MASK 0x4000 /* WSEQ_EOS */ +#define WM8903_WSEQ_EOS_SHIFT 14 /* WSEQ_EOS */ +#define WM8903_WSEQ_EOS_WIDTH 1 /* WSEQ_EOS */ +#define WM8903_WSEQ_DELAY_MASK 0x0F00 /* WSEQ_DELAY - [11:8] */ +#define WM8903_WSEQ_DELAY_SHIFT 8 /* WSEQ_DELAY - [11:8] */ +#define WM8903_WSEQ_DELAY_WIDTH 4 /* WSEQ_DELAY - [11:8] */ +#define WM8903_WSEQ_DATA_MASK 0x00FF /* WSEQ_DATA - [7:0] */ +#define WM8903_WSEQ_DATA_SHIFT 0 /* WSEQ_DATA - [7:0] */ +#define WM8903_WSEQ_DATA_WIDTH 8 /* WSEQ_DATA - [7:0] */ + +/* + * R111 (0x6F) - Write Sequencer 3 + */ +#define WM8903_WSEQ_ABORT 0x0200 /* WSEQ_ABORT */ +#define WM8903_WSEQ_ABORT_MASK 0x0200 /* WSEQ_ABORT */ +#define WM8903_WSEQ_ABORT_SHIFT 9 /* WSEQ_ABORT */ +#define WM8903_WSEQ_ABORT_WIDTH 1 /* WSEQ_ABORT */ +#define WM8903_WSEQ_START 0x0100 /* WSEQ_START */ +#define WM8903_WSEQ_START_MASK 0x0100 /* WSEQ_START */ +#define WM8903_WSEQ_START_SHIFT 8 /* WSEQ_START */ +#define WM8903_WSEQ_START_WIDTH 1 /* WSEQ_START */ +#define WM8903_WSEQ_START_INDEX_MASK 0x003F /* WSEQ_START_INDEX - [5:0] */ +#define WM8903_WSEQ_START_INDEX_SHIFT 0 /* WSEQ_START_INDEX - [5:0] */ +#define WM8903_WSEQ_START_INDEX_WIDTH 6 /* WSEQ_START_INDEX - [5:0] */ + +/* + * R112 (0x70) - Write Sequencer 4 + */ +#define WM8903_WSEQ_CURRENT_INDEX_MASK 0x03F0 /* WSEQ_CURRENT_INDEX - [9:4] */ +#define WM8903_WSEQ_CURRENT_INDEX_SHIFT 4 /* WSEQ_CURRENT_INDEX - [9:4] */ +#define WM8903_WSEQ_CURRENT_INDEX_WIDTH 6 /* WSEQ_CURRENT_INDEX - [9:4] */ +#define WM8903_WSEQ_BUSY 0x0001 /* WSEQ_BUSY */ +#define WM8903_WSEQ_BUSY_MASK 0x0001 /* WSEQ_BUSY */ +#define WM8903_WSEQ_BUSY_SHIFT 0 /* WSEQ_BUSY */ +#define WM8903_WSEQ_BUSY_WIDTH 1 /* WSEQ_BUSY */ + +/* + * R114 (0x72) - Control Interface + */ +#define WM8903_MASK_WRITE_ENA 0x0001 /* MASK_WRITE_ENA */ +#define WM8903_MASK_WRITE_ENA_MASK 0x0001 /* MASK_WRITE_ENA */ +#define WM8903_MASK_WRITE_ENA_SHIFT 0 /* MASK_WRITE_ENA */ +#define WM8903_MASK_WRITE_ENA_WIDTH 1 /* MASK_WRITE_ENA */ + +/* + * R116 (0x74) - GPIO Control 1 + */ +#define WM8903_GP1_FN_MASK 0x1F00 /* GP1_FN - [12:8] */ +#define WM8903_GP1_FN_SHIFT 8 /* GP1_FN - [12:8] */ +#define WM8903_GP1_FN_WIDTH 5 /* GP1_FN - [12:8] */ +#define WM8903_GP1_DIR 0x0080 /* GP1_DIR */ +#define WM8903_GP1_DIR_MASK 0x0080 /* GP1_DIR */ +#define WM8903_GP1_DIR_SHIFT 7 /* GP1_DIR */ +#define WM8903_GP1_DIR_WIDTH 1 /* GP1_DIR */ +#define WM8903_GP1_OP_CFG 0x0040 /* GP1_OP_CFG */ +#define WM8903_GP1_OP_CFG_MASK 0x0040 /* GP1_OP_CFG */ +#define WM8903_GP1_OP_CFG_SHIFT 6 /* GP1_OP_CFG */ +#define WM8903_GP1_OP_CFG_WIDTH 1 /* GP1_OP_CFG */ +#define WM8903_GP1_IP_CFG 0x0020 /* GP1_IP_CFG */ +#define WM8903_GP1_IP_CFG_MASK 0x0020 /* GP1_IP_CFG */ +#define WM8903_GP1_IP_CFG_SHIFT 5 /* GP1_IP_CFG */ +#define WM8903_GP1_IP_CFG_WIDTH 1 /* GP1_IP_CFG */ +#define WM8903_GP1_LVL 0x0010 /* GP1_LVL */ +#define WM8903_GP1_LVL_MASK 0x0010 /* GP1_LVL */ +#define WM8903_GP1_LVL_SHIFT 4 /* GP1_LVL */ +#define WM8903_GP1_LVL_WIDTH 1 /* GP1_LVL */ +#define WM8903_GP1_PD 0x0008 /* GP1_PD */ +#define WM8903_GP1_PD_MASK 0x0008 /* GP1_PD */ +#define WM8903_GP1_PD_SHIFT 3 /* GP1_PD */ +#define WM8903_GP1_PD_WIDTH 1 /* GP1_PD */ +#define WM8903_GP1_PU 0x0004 /* GP1_PU */ +#define WM8903_GP1_PU_MASK 0x0004 /* GP1_PU */ +#define WM8903_GP1_PU_SHIFT 2 /* GP1_PU */ +#define WM8903_GP1_PU_WIDTH 1 /* GP1_PU */ +#define WM8903_GP1_INTMODE 0x0002 /* GP1_INTMODE */ +#define WM8903_GP1_INTMODE_MASK 0x0002 /* GP1_INTMODE */ +#define WM8903_GP1_INTMODE_SHIFT 1 /* GP1_INTMODE */ +#define WM8903_GP1_INTMODE_WIDTH 1 /* GP1_INTMODE */ +#define WM8903_GP1_DB 0x0001 /* GP1_DB */ +#define WM8903_GP1_DB_MASK 0x0001 /* GP1_DB */ +#define WM8903_GP1_DB_SHIFT 0 /* GP1_DB */ +#define WM8903_GP1_DB_WIDTH 1 /* GP1_DB */ + +/* + * R117 (0x75) - GPIO Control 2 + */ +#define WM8903_GP2_FN_MASK 0x1F00 /* GP2_FN - [12:8] */ +#define WM8903_GP2_FN_SHIFT 8 /* GP2_FN - [12:8] */ +#define WM8903_GP2_FN_WIDTH 5 /* GP2_FN - [12:8] */ +#define WM8903_GP2_DIR 0x0080 /* GP2_DIR */ +#define WM8903_GP2_DIR_MASK 0x0080 /* GP2_DIR */ +#define WM8903_GP2_DIR_SHIFT 7 /* GP2_DIR */ +#define WM8903_GP2_DIR_WIDTH 1 /* GP2_DIR */ +#define WM8903_GP2_OP_CFG 0x0040 /* GP2_OP_CFG */ +#define WM8903_GP2_OP_CFG_MASK 0x0040 /* GP2_OP_CFG */ +#define WM8903_GP2_OP_CFG_SHIFT 6 /* GP2_OP_CFG */ +#define WM8903_GP2_OP_CFG_WIDTH 1 /* GP2_OP_CFG */ +#define WM8903_GP2_IP_CFG 0x0020 /* GP2_IP_CFG */ +#define WM8903_GP2_IP_CFG_MASK 0x0020 /* GP2_IP_CFG */ +#define WM8903_GP2_IP_CFG_SHIFT 5 /* GP2_IP_CFG */ +#define WM8903_GP2_IP_CFG_WIDTH 1 /* GP2_IP_CFG */ +#define WM8903_GP2_LVL 0x0010 /* GP2_LVL */ +#define WM8903_GP2_LVL_MASK 0x0010 /* GP2_LVL */ +#define WM8903_GP2_LVL_SHIFT 4 /* GP2_LVL */ +#define WM8903_GP2_LVL_WIDTH 1 /* GP2_LVL */ +#define WM8903_GP2_PD 0x0008 /* GP2_PD */ +#define WM8903_GP2_PD_MASK 0x0008 /* GP2_PD */ +#define WM8903_GP2_PD_SHIFT 3 /* GP2_PD */ +#define WM8903_GP2_PD_WIDTH 1 /* GP2_PD */ +#define WM8903_GP2_PU 0x0004 /* GP2_PU */ +#define WM8903_GP2_PU_MASK 0x0004 /* GP2_PU */ +#define WM8903_GP2_PU_SHIFT 2 /* GP2_PU */ +#define WM8903_GP2_PU_WIDTH 1 /* GP2_PU */ +#define WM8903_GP2_INTMODE 0x0002 /* GP2_INTMODE */ +#define WM8903_GP2_INTMODE_MASK 0x0002 /* GP2_INTMODE */ +#define WM8903_GP2_INTMODE_SHIFT 1 /* GP2_INTMODE */ +#define WM8903_GP2_INTMODE_WIDTH 1 /* GP2_INTMODE */ +#define WM8903_GP2_DB 0x0001 /* GP2_DB */ +#define WM8903_GP2_DB_MASK 0x0001 /* GP2_DB */ +#define WM8903_GP2_DB_SHIFT 0 /* GP2_DB */ +#define WM8903_GP2_DB_WIDTH 1 /* GP2_DB */ + +/* + * R118 (0x76) - GPIO Control 3 + */ +#define WM8903_GP3_FN_MASK 0x1F00 /* GP3_FN - [12:8] */ +#define WM8903_GP3_FN_SHIFT 8 /* GP3_FN - [12:8] */ +#define WM8903_GP3_FN_WIDTH 5 /* GP3_FN - [12:8] */ +#define WM8903_GP3_DIR 0x0080 /* GP3_DIR */ +#define WM8903_GP3_DIR_MASK 0x0080 /* GP3_DIR */ +#define WM8903_GP3_DIR_SHIFT 7 /* GP3_DIR */ +#define WM8903_GP3_DIR_WIDTH 1 /* GP3_DIR */ +#define WM8903_GP3_OP_CFG 0x0040 /* GP3_OP_CFG */ +#define WM8903_GP3_OP_CFG_MASK 0x0040 /* GP3_OP_CFG */ +#define WM8903_GP3_OP_CFG_SHIFT 6 /* GP3_OP_CFG */ +#define WM8903_GP3_OP_CFG_WIDTH 1 /* GP3_OP_CFG */ +#define WM8903_GP3_IP_CFG 0x0020 /* GP3_IP_CFG */ +#define WM8903_GP3_IP_CFG_MASK 0x0020 /* GP3_IP_CFG */ +#define WM8903_GP3_IP_CFG_SHIFT 5 /* GP3_IP_CFG */ +#define WM8903_GP3_IP_CFG_WIDTH 1 /* GP3_IP_CFG */ +#define WM8903_GP3_LVL 0x0010 /* GP3_LVL */ +#define WM8903_GP3_LVL_MASK 0x0010 /* GP3_LVL */ +#define WM8903_GP3_LVL_SHIFT 4 /* GP3_LVL */ +#define WM8903_GP3_LVL_WIDTH 1 /* GP3_LVL */ +#define WM8903_GP3_PD 0x0008 /* GP3_PD */ +#define WM8903_GP3_PD_MASK 0x0008 /* GP3_PD */ +#define WM8903_GP3_PD_SHIFT 3 /* GP3_PD */ +#define WM8903_GP3_PD_WIDTH 1 /* GP3_PD */ +#define WM8903_GP3_PU 0x0004 /* GP3_PU */ +#define WM8903_GP3_PU_MASK 0x0004 /* GP3_PU */ +#define WM8903_GP3_PU_SHIFT 2 /* GP3_PU */ +#define WM8903_GP3_PU_WIDTH 1 /* GP3_PU */ +#define WM8903_GP3_INTMODE 0x0002 /* GP3_INTMODE */ +#define WM8903_GP3_INTMODE_MASK 0x0002 /* GP3_INTMODE */ +#define WM8903_GP3_INTMODE_SHIFT 1 /* GP3_INTMODE */ +#define WM8903_GP3_INTMODE_WIDTH 1 /* GP3_INTMODE */ +#define WM8903_GP3_DB 0x0001 /* GP3_DB */ +#define WM8903_GP3_DB_MASK 0x0001 /* GP3_DB */ +#define WM8903_GP3_DB_SHIFT 0 /* GP3_DB */ +#define WM8903_GP3_DB_WIDTH 1 /* GP3_DB */ + +/* + * R119 (0x77) - GPIO Control 4 + */ +#define WM8903_GP4_FN_MASK 0x1F00 /* GP4_FN - [12:8] */ +#define WM8903_GP4_FN_SHIFT 8 /* GP4_FN - [12:8] */ +#define WM8903_GP4_FN_WIDTH 5 /* GP4_FN - [12:8] */ +#define WM8903_GP4_DIR 0x0080 /* GP4_DIR */ +#define WM8903_GP4_DIR_MASK 0x0080 /* GP4_DIR */ +#define WM8903_GP4_DIR_SHIFT 7 /* GP4_DIR */ +#define WM8903_GP4_DIR_WIDTH 1 /* GP4_DIR */ +#define WM8903_GP4_OP_CFG 0x0040 /* GP4_OP_CFG */ +#define WM8903_GP4_OP_CFG_MASK 0x0040 /* GP4_OP_CFG */ +#define WM8903_GP4_OP_CFG_SHIFT 6 /* GP4_OP_CFG */ +#define WM8903_GP4_OP_CFG_WIDTH 1 /* GP4_OP_CFG */ +#define WM8903_GP4_IP_CFG 0x0020 /* GP4_IP_CFG */ +#define WM8903_GP4_IP_CFG_MASK 0x0020 /* GP4_IP_CFG */ +#define WM8903_GP4_IP_CFG_SHIFT 5 /* GP4_IP_CFG */ +#define WM8903_GP4_IP_CFG_WIDTH 1 /* GP4_IP_CFG */ +#define WM8903_GP4_LVL 0x0010 /* GP4_LVL */ +#define WM8903_GP4_LVL_MASK 0x0010 /* GP4_LVL */ +#define WM8903_GP4_LVL_SHIFT 4 /* GP4_LVL */ +#define WM8903_GP4_LVL_WIDTH 1 /* GP4_LVL */ +#define WM8903_GP4_PD 0x0008 /* GP4_PD */ +#define WM8903_GP4_PD_MASK 0x0008 /* GP4_PD */ +#define WM8903_GP4_PD_SHIFT 3 /* GP4_PD */ +#define WM8903_GP4_PD_WIDTH 1 /* GP4_PD */ +#define WM8903_GP4_PU 0x0004 /* GP4_PU */ +#define WM8903_GP4_PU_MASK 0x0004 /* GP4_PU */ +#define WM8903_GP4_PU_SHIFT 2 /* GP4_PU */ +#define WM8903_GP4_PU_WIDTH 1 /* GP4_PU */ +#define WM8903_GP4_INTMODE 0x0002 /* GP4_INTMODE */ +#define WM8903_GP4_INTMODE_MASK 0x0002 /* GP4_INTMODE */ +#define WM8903_GP4_INTMODE_SHIFT 1 /* GP4_INTMODE */ +#define WM8903_GP4_INTMODE_WIDTH 1 /* GP4_INTMODE */ +#define WM8903_GP4_DB 0x0001 /* GP4_DB */ +#define WM8903_GP4_DB_MASK 0x0001 /* GP4_DB */ +#define WM8903_GP4_DB_SHIFT 0 /* GP4_DB */ +#define WM8903_GP4_DB_WIDTH 1 /* GP4_DB */ + +/* + * R120 (0x78) - GPIO Control 5 + */ +#define WM8903_GP5_FN_MASK 0x1F00 /* GP5_FN - [12:8] */ +#define WM8903_GP5_FN_SHIFT 8 /* GP5_FN - [12:8] */ +#define WM8903_GP5_FN_WIDTH 5 /* GP5_FN - [12:8] */ +#define WM8903_GP5_DIR 0x0080 /* GP5_DIR */ +#define WM8903_GP5_DIR_MASK 0x0080 /* GP5_DIR */ +#define WM8903_GP5_DIR_SHIFT 7 /* GP5_DIR */ +#define WM8903_GP5_DIR_WIDTH 1 /* GP5_DIR */ +#define WM8903_GP5_OP_CFG 0x0040 /* GP5_OP_CFG */ +#define WM8903_GP5_OP_CFG_MASK 0x0040 /* GP5_OP_CFG */ +#define WM8903_GP5_OP_CFG_SHIFT 6 /* GP5_OP_CFG */ +#define WM8903_GP5_OP_CFG_WIDTH 1 /* GP5_OP_CFG */ +#define WM8903_GP5_IP_CFG 0x0020 /* GP5_IP_CFG */ +#define WM8903_GP5_IP_CFG_MASK 0x0020 /* GP5_IP_CFG */ +#define WM8903_GP5_IP_CFG_SHIFT 5 /* GP5_IP_CFG */ +#define WM8903_GP5_IP_CFG_WIDTH 1 /* GP5_IP_CFG */ +#define WM8903_GP5_LVL 0x0010 /* GP5_LVL */ +#define WM8903_GP5_LVL_MASK 0x0010 /* GP5_LVL */ +#define WM8903_GP5_LVL_SHIFT 4 /* GP5_LVL */ +#define WM8903_GP5_LVL_WIDTH 1 /* GP5_LVL */ +#define WM8903_GP5_PD 0x0008 /* GP5_PD */ +#define WM8903_GP5_PD_MASK 0x0008 /* GP5_PD */ +#define WM8903_GP5_PD_SHIFT 3 /* GP5_PD */ +#define WM8903_GP5_PD_WIDTH 1 /* GP5_PD */ +#define WM8903_GP5_PU 0x0004 /* GP5_PU */ +#define WM8903_GP5_PU_MASK 0x0004 /* GP5_PU */ +#define WM8903_GP5_PU_SHIFT 2 /* GP5_PU */ +#define WM8903_GP5_PU_WIDTH 1 /* GP5_PU */ +#define WM8903_GP5_INTMODE 0x0002 /* GP5_INTMODE */ +#define WM8903_GP5_INTMODE_MASK 0x0002 /* GP5_INTMODE */ +#define WM8903_GP5_INTMODE_SHIFT 1 /* GP5_INTMODE */ +#define WM8903_GP5_INTMODE_WIDTH 1 /* GP5_INTMODE */ +#define WM8903_GP5_DB 0x0001 /* GP5_DB */ +#define WM8903_GP5_DB_MASK 0x0001 /* GP5_DB */ +#define WM8903_GP5_DB_SHIFT 0 /* GP5_DB */ +#define WM8903_GP5_DB_WIDTH 1 /* GP5_DB */ + +/* + * R121 (0x79) - Interrupt Status 1 + */ +#define WM8903_MICSHRT_EINT 0x8000 /* MICSHRT_EINT */ +#define WM8903_MICSHRT_EINT_MASK 0x8000 /* MICSHRT_EINT */ +#define WM8903_MICSHRT_EINT_SHIFT 15 /* MICSHRT_EINT */ +#define WM8903_MICSHRT_EINT_WIDTH 1 /* MICSHRT_EINT */ +#define WM8903_MICDET_EINT 0x4000 /* MICDET_EINT */ +#define WM8903_MICDET_EINT_MASK 0x4000 /* MICDET_EINT */ +#define WM8903_MICDET_EINT_SHIFT 14 /* MICDET_EINT */ +#define WM8903_MICDET_EINT_WIDTH 1 /* MICDET_EINT */ +#define WM8903_WSEQ_BUSY_EINT 0x2000 /* WSEQ_BUSY_EINT */ +#define WM8903_WSEQ_BUSY_EINT_MASK 0x2000 /* WSEQ_BUSY_EINT */ +#define WM8903_WSEQ_BUSY_EINT_SHIFT 13 /* WSEQ_BUSY_EINT */ +#define WM8903_WSEQ_BUSY_EINT_WIDTH 1 /* WSEQ_BUSY_EINT */ +#define WM8903_GP5_EINT 0x0010 /* GP5_EINT */ +#define WM8903_GP5_EINT_MASK 0x0010 /* GP5_EINT */ +#define WM8903_GP5_EINT_SHIFT 4 /* GP5_EINT */ +#define WM8903_GP5_EINT_WIDTH 1 /* GP5_EINT */ +#define WM8903_GP4_EINT 0x0008 /* GP4_EINT */ +#define WM8903_GP4_EINT_MASK 0x0008 /* GP4_EINT */ +#define WM8903_GP4_EINT_SHIFT 3 /* GP4_EINT */ +#define WM8903_GP4_EINT_WIDTH 1 /* GP4_EINT */ +#define WM8903_GP3_EINT 0x0004 /* GP3_EINT */ +#define WM8903_GP3_EINT_MASK 0x0004 /* GP3_EINT */ +#define WM8903_GP3_EINT_SHIFT 2 /* GP3_EINT */ +#define WM8903_GP3_EINT_WIDTH 1 /* GP3_EINT */ +#define WM8903_GP2_EINT 0x0002 /* GP2_EINT */ +#define WM8903_GP2_EINT_MASK 0x0002 /* GP2_EINT */ +#define WM8903_GP2_EINT_SHIFT 1 /* GP2_EINT */ +#define WM8903_GP2_EINT_WIDTH 1 /* GP2_EINT */ +#define WM8903_GP1_EINT 0x0001 /* GP1_EINT */ +#define WM8903_GP1_EINT_MASK 0x0001 /* GP1_EINT */ +#define WM8903_GP1_EINT_SHIFT 0 /* GP1_EINT */ +#define WM8903_GP1_EINT_WIDTH 1 /* GP1_EINT */ + +/* + * R122 (0x7A) - Interrupt Status 1 Mask + */ +#define WM8903_IM_MICSHRT_EINT 0x8000 /* IM_MICSHRT_EINT */ +#define WM8903_IM_MICSHRT_EINT_MASK 0x8000 /* IM_MICSHRT_EINT */ +#define WM8903_IM_MICSHRT_EINT_SHIFT 15 /* IM_MICSHRT_EINT */ +#define WM8903_IM_MICSHRT_EINT_WIDTH 1 /* IM_MICSHRT_EINT */ +#define WM8903_IM_MICDET_EINT 0x4000 /* IM_MICDET_EINT */ +#define WM8903_IM_MICDET_EINT_MASK 0x4000 /* IM_MICDET_EINT */ +#define WM8903_IM_MICDET_EINT_SHIFT 14 /* IM_MICDET_EINT */ +#define WM8903_IM_MICDET_EINT_WIDTH 1 /* IM_MICDET_EINT */ +#define WM8903_IM_WSEQ_BUSY_EINT 0x2000 /* IM_WSEQ_BUSY_EINT */ +#define WM8903_IM_WSEQ_BUSY_EINT_MASK 0x2000 /* IM_WSEQ_BUSY_EINT */ +#define WM8903_IM_WSEQ_BUSY_EINT_SHIFT 13 /* IM_WSEQ_BUSY_EINT */ +#define WM8903_IM_WSEQ_BUSY_EINT_WIDTH 1 /* IM_WSEQ_BUSY_EINT */ +#define WM8903_IM_GP5_EINT 0x0010 /* IM_GP5_EINT */ +#define WM8903_IM_GP5_EINT_MASK 0x0010 /* IM_GP5_EINT */ +#define WM8903_IM_GP5_EINT_SHIFT 4 /* IM_GP5_EINT */ +#define WM8903_IM_GP5_EINT_WIDTH 1 /* IM_GP5_EINT */ +#define WM8903_IM_GP4_EINT 0x0008 /* IM_GP4_EINT */ +#define WM8903_IM_GP4_EINT_MASK 0x0008 /* IM_GP4_EINT */ +#define WM8903_IM_GP4_EINT_SHIFT 3 /* IM_GP4_EINT */ +#define WM8903_IM_GP4_EINT_WIDTH 1 /* IM_GP4_EINT */ +#define WM8903_IM_GP3_EINT 0x0004 /* IM_GP3_EINT */ +#define WM8903_IM_GP3_EINT_MASK 0x0004 /* IM_GP3_EINT */ +#define WM8903_IM_GP3_EINT_SHIFT 2 /* IM_GP3_EINT */ +#define WM8903_IM_GP3_EINT_WIDTH 1 /* IM_GP3_EINT */ +#define WM8903_IM_GP2_EINT 0x0002 /* IM_GP2_EINT */ +#define WM8903_IM_GP2_EINT_MASK 0x0002 /* IM_GP2_EINT */ +#define WM8903_IM_GP2_EINT_SHIFT 1 /* IM_GP2_EINT */ +#define WM8903_IM_GP2_EINT_WIDTH 1 /* IM_GP2_EINT */ +#define WM8903_IM_GP1_EINT 0x0001 /* IM_GP1_EINT */ +#define WM8903_IM_GP1_EINT_MASK 0x0001 /* IM_GP1_EINT */ +#define WM8903_IM_GP1_EINT_SHIFT 0 /* IM_GP1_EINT */ +#define WM8903_IM_GP1_EINT_WIDTH 1 /* IM_GP1_EINT */ + +/* + * R123 (0x7B) - Interrupt Polarity 1 + */ +#define WM8903_MICSHRT_INV 0x8000 /* MICSHRT_INV */ +#define WM8903_MICSHRT_INV_MASK 0x8000 /* MICSHRT_INV */ +#define WM8903_MICSHRT_INV_SHIFT 15 /* MICSHRT_INV */ +#define WM8903_MICSHRT_INV_WIDTH 1 /* MICSHRT_INV */ +#define WM8903_MICDET_INV 0x4000 /* MICDET_INV */ +#define WM8903_MICDET_INV_MASK 0x4000 /* MICDET_INV */ +#define WM8903_MICDET_INV_SHIFT 14 /* MICDET_INV */ +#define WM8903_MICDET_INV_WIDTH 1 /* MICDET_INV */ + +/* + * R126 (0x7E) - Interrupt Control + */ +#define WM8903_IRQ_POL 0x0001 /* IRQ_POL */ +#define WM8903_IRQ_POL_MASK 0x0001 /* IRQ_POL */ +#define WM8903_IRQ_POL_SHIFT 0 /* IRQ_POL */ +#define WM8903_IRQ_POL_WIDTH 1 /* IRQ_POL */ + +/* + * R129 (0x81) - Control Interface Test 1 + */ +#define WM8903_USER_KEY 0x0002 /* USER_KEY */ +#define WM8903_USER_KEY_MASK 0x0002 /* USER_KEY */ +#define WM8903_USER_KEY_SHIFT 1 /* USER_KEY */ +#define WM8903_USER_KEY_WIDTH 1 /* USER_KEY */ +#define WM8903_TEST_KEY 0x0001 /* TEST_KEY */ +#define WM8903_TEST_KEY_MASK 0x0001 /* TEST_KEY */ +#define WM8903_TEST_KEY_SHIFT 0 /* TEST_KEY */ +#define WM8903_TEST_KEY_WIDTH 1 /* TEST_KEY */ + +/* + * R149 (0x95) - Charge Pump Test 1 + */ +#define WM8903_CP_SW_KELVIN_MODE_MASK 0x0006 /* CP_SW_KELVIN_MODE - [2:1] */ +#define WM8903_CP_SW_KELVIN_MODE_SHIFT 1 /* CP_SW_KELVIN_MODE - [2:1] */ +#define WM8903_CP_SW_KELVIN_MODE_WIDTH 2 /* CP_SW_KELVIN_MODE - [2:1] */ + +/* + * R164 (0xA4) - Clock Rate Test 4 + */ +#define WM8903_ADC_DIG_MIC 0x0200 /* ADC_DIG_MIC */ +#define WM8903_ADC_DIG_MIC_MASK 0x0200 /* ADC_DIG_MIC */ +#define WM8903_ADC_DIG_MIC_SHIFT 9 /* ADC_DIG_MIC */ +#define WM8903_ADC_DIG_MIC_WIDTH 1 /* ADC_DIG_MIC */ + +/* + * R172 (0xAC) - Analogue Output Bias 0 + */ +#define WM8903_PGA_BIAS_MASK 0x0070 /* PGA_BIAS - [6:4] */ +#define WM8903_PGA_BIAS_SHIFT 4 /* PGA_BIAS - [6:4] */ +#define WM8903_PGA_BIAS_WIDTH 3 /* PGA_BIAS - [6:4] */ + +#endif diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c new file mode 100644 index 00000000000..974a4cd0f3f --- /dev/null +++ b/sound/soc/codecs/wm8971.c @@ -0,0 +1,942 @@ +/* + * wm8971.c -- WM8971 ALSA SoC Audio driver + * + * Copyright 2005 Lab126, Inc. + * + * Author: Kenneth Kiraly <kiraly@lab126.com> + * + * Based on wm8753.c by Liam Girdwood + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> + +#include "wm8971.h" + +#define AUDIO_NAME "wm8971" +#define WM8971_VERSION "0.9" + +#define WM8971_REG_COUNT 43 + +static struct workqueue_struct *wm8971_workq = NULL; + +/* codec private data */ +struct wm8971_priv { + unsigned int sysclk; +}; + +/* + * wm8971 register cache + * We can't read the WM8971 register space when we + * are using 2 wire for device control, so we cache them instead. + */ +static const u16 wm8971_reg[] = { + 0x0097, 0x0097, 0x0079, 0x0079, /* 0 */ + 0x0000, 0x0008, 0x0000, 0x000a, /* 4 */ + 0x0000, 0x0000, 0x00ff, 0x00ff, /* 8 */ + 0x000f, 0x000f, 0x0000, 0x0000, /* 12 */ + 0x0000, 0x007b, 0x0000, 0x0032, /* 16 */ + 0x0000, 0x00c3, 0x00c3, 0x00c0, /* 20 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 24 */ + 0x0000, 0x0000, 0x0000, 0x0000, /* 28 */ + 0x0000, 0x0000, 0x0050, 0x0050, /* 32 */ + 0x0050, 0x0050, 0x0050, 0x0050, /* 36 */ + 0x0079, 0x0079, 0x0079, /* 40 */ +}; + +static inline unsigned int wm8971_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + if (reg < WM8971_REG_COUNT) + return cache[reg]; + + return -1; +} + +static inline void wm8971_write_reg_cache(struct snd_soc_codec *codec, + unsigned int reg, unsigned int value) +{ + u16 *cache = codec->reg_cache; + if (reg < WM8971_REG_COUNT) + cache[reg] = value; +} + +static int wm8971_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 data[2]; + + /* data is + * D15..D9 WM8753 register offset + * D8...D0 register data + */ + data[0] = (reg << 1) | ((value >> 8) & 0x0001); + data[1] = value & 0x00ff; + + wm8971_write_reg_cache (codec, reg, value); + if (codec->hw_write(codec->control_data, data, 2) == 2) + return 0; + else + return -EIO; +} + +#define wm8971_reset(c) wm8971_write(c, WM8971_RESET, 0) + +/* WM8971 Controls */ +static const char *wm8971_bass[] = { "Linear Control", "Adaptive Boost" }; +static const char *wm8971_bass_filter[] = { "130Hz @ 48kHz", + "200Hz @ 48kHz" }; +static const char *wm8971_treble[] = { "8kHz", "4kHz" }; +static const char *wm8971_alc_func[] = { "Off", "Right", "Left", "Stereo" }; +static const char *wm8971_ng_type[] = { "Constant PGA Gain", + "Mute ADC Output" }; +static const char *wm8971_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" }; +static const char *wm8971_mono_mux[] = {"Stereo", "Mono (Left)", + "Mono (Right)", "Digital Mono"}; +static const char *wm8971_dac_phase[] = { "Non Inverted", "Inverted" }; +static const char *wm8971_lline_mux[] = {"Line", "NC", "NC", "PGA", + "Differential"}; +static const char *wm8971_rline_mux[] = {"Line", "Mic", "NC", "PGA", + "Differential"}; +static const char *wm8971_lpga_sel[] = {"Line", "NC", "NC", "Differential"}; +static const char *wm8971_rpga_sel[] = {"Line", "Mic", "NC", "Differential"}; +static const char *wm8971_adcpol[] = {"Normal", "L Invert", "R Invert", + "L + R Invert"}; + +static const struct soc_enum wm8971_enum[] = { + SOC_ENUM_SINGLE(WM8971_BASS, 7, 2, wm8971_bass), /* 0 */ + SOC_ENUM_SINGLE(WM8971_BASS, 6, 2, wm8971_bass_filter), + SOC_ENUM_SINGLE(WM8971_TREBLE, 6, 2, wm8971_treble), + SOC_ENUM_SINGLE(WM8971_ALC1, 7, 4, wm8971_alc_func), + SOC_ENUM_SINGLE(WM8971_NGATE, 1, 2, wm8971_ng_type), /* 4 */ + SOC_ENUM_SINGLE(WM8971_ADCDAC, 1, 4, wm8971_deemp), + SOC_ENUM_SINGLE(WM8971_ADCTL1, 4, 4, wm8971_mono_mux), + SOC_ENUM_SINGLE(WM8971_ADCTL1, 1, 2, wm8971_dac_phase), + SOC_ENUM_SINGLE(WM8971_LOUTM1, 0, 5, wm8971_lline_mux), /* 8 */ + SOC_ENUM_SINGLE(WM8971_ROUTM1, 0, 5, wm8971_rline_mux), + SOC_ENUM_SINGLE(WM8971_LADCIN, 6, 4, wm8971_lpga_sel), + SOC_ENUM_SINGLE(WM8971_RADCIN, 6, 4, wm8971_rpga_sel), + SOC_ENUM_SINGLE(WM8971_ADCDAC, 5, 4, wm8971_adcpol), /* 12 */ + SOC_ENUM_SINGLE(WM8971_ADCIN, 6, 4, wm8971_mono_mux), +}; + +static const struct snd_kcontrol_new wm8971_snd_controls[] = { + SOC_DOUBLE_R("Capture Volume", WM8971_LINVOL, WM8971_RINVOL, 0, 63, 0), + SOC_DOUBLE_R("Capture ZC Switch", WM8971_LINVOL, WM8971_RINVOL, + 6, 1, 0), + SOC_DOUBLE_R("Capture Switch", WM8971_LINVOL, WM8971_RINVOL, 7, 1, 1), + + SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8971_LOUT1V, + WM8971_ROUT1V, 7, 1, 0), + SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8971_LOUT2V, + WM8971_ROUT2V, 7, 1, 0), + SOC_SINGLE("Mono Playback ZC Switch", WM8971_MOUTV, 7, 1, 0), + + SOC_DOUBLE_R("PCM Volume", WM8971_LDAC, WM8971_RDAC, 0, 255, 0), + + SOC_DOUBLE_R("Bypass Left Playback Volume", WM8971_LOUTM1, + WM8971_LOUTM2, 4, 7, 1), + SOC_DOUBLE_R("Bypass Right Playback Volume", WM8971_ROUTM1, + WM8971_ROUTM2, 4, 7, 1), + SOC_DOUBLE_R("Bypass Mono Playback Volume", WM8971_MOUTM1, + WM8971_MOUTM2, 4, 7, 1), + + SOC_DOUBLE_R("Headphone Playback Volume", WM8971_LOUT1V, + WM8971_ROUT1V, 0, 127, 0), + SOC_DOUBLE_R("Speaker Playback Volume", WM8971_LOUT2V, + WM8971_ROUT2V, 0, 127, 0), + + SOC_ENUM("Bass Boost", wm8971_enum[0]), + SOC_ENUM("Bass Filter", wm8971_enum[1]), + SOC_SINGLE("Bass Volume", WM8971_BASS, 0, 7, 1), + + SOC_SINGLE("Treble Volume", WM8971_TREBLE, 0, 7, 0), + SOC_ENUM("Treble Cut-off", wm8971_enum[2]), + + SOC_SINGLE("Capture Filter Switch", WM8971_ADCDAC, 0, 1, 1), + + SOC_SINGLE("ALC Target Volume", WM8971_ALC1, 0, 7, 0), + SOC_SINGLE("ALC Max Volume", WM8971_ALC1, 4, 7, 0), + + SOC_SINGLE("ALC Capture Target Volume", WM8971_ALC1, 0, 7, 0), + SOC_SINGLE("ALC Capture Max Volume", WM8971_ALC1, 4, 7, 0), + SOC_ENUM("ALC Capture Function", wm8971_enum[3]), + SOC_SINGLE("ALC Capture ZC Switch", WM8971_ALC2, 7, 1, 0), + SOC_SINGLE("ALC Capture Hold Time", WM8971_ALC2, 0, 15, 0), + SOC_SINGLE("ALC Capture Decay Time", WM8971_ALC3, 4, 15, 0), + SOC_SINGLE("ALC Capture Attack Time", WM8971_ALC3, 0, 15, 0), + SOC_SINGLE("ALC Capture NG Threshold", WM8971_NGATE, 3, 31, 0), + SOC_ENUM("ALC Capture NG Type", wm8971_enum[4]), + SOC_SINGLE("ALC Capture NG Switch", WM8971_NGATE, 0, 1, 0), + + SOC_SINGLE("Capture 6dB Attenuate", WM8971_ADCDAC, 8, 1, 0), + SOC_SINGLE("Playback 6dB Attenuate", WM8971_ADCDAC, 7, 1, 0), + + SOC_ENUM("Playback De-emphasis", wm8971_enum[5]), + SOC_ENUM("Playback Function", wm8971_enum[6]), + SOC_ENUM("Playback Phase", wm8971_enum[7]), + + SOC_DOUBLE_R("Mic Boost", WM8971_LADCIN, WM8971_RADCIN, 4, 3, 0), +}; + +/* add non-DAPM controls */ +static int wm8971_add_controls(struct snd_soc_codec *codec) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(wm8971_snd_controls); i++) { + err = snd_ctl_add(codec->card, + snd_soc_cnew(&wm8971_snd_controls[i], + codec, NULL)); + if (err < 0) + return err; + } + return 0; +} + +/* + * DAPM Controls + */ + +/* Left Mixer */ +static const struct snd_kcontrol_new wm8971_left_mixer_controls[] = { +SOC_DAPM_SINGLE("Playback Switch", WM8971_LOUTM1, 8, 1, 0), +SOC_DAPM_SINGLE("Left Bypass Switch", WM8971_LOUTM1, 7, 1, 0), +SOC_DAPM_SINGLE("Right Playback Switch", WM8971_LOUTM2, 8, 1, 0), +SOC_DAPM_SINGLE("Right Bypass Switch", WM8971_LOUTM2, 7, 1, 0), +}; + +/* Right Mixer */ +static const struct snd_kcontrol_new wm8971_right_mixer_controls[] = { +SOC_DAPM_SINGLE("Left Playback Switch", WM8971_ROUTM1, 8, 1, 0), +SOC_DAPM_SINGLE("Left Bypass Switch", WM8971_ROUTM1, 7, 1, 0), +SOC_DAPM_SINGLE("Playback Switch", WM8971_ROUTM2, 8, 1, 0), +SOC_DAPM_SINGLE("Right Bypass Switch", WM8971_ROUTM2, 7, 1, 0), +}; + +/* Mono Mixer */ +static const struct snd_kcontrol_new wm8971_mono_mixer_controls[] = { +SOC_DAPM_SINGLE("Left Playback Switch", WM8971_MOUTM1, 8, 1, 0), +SOC_DAPM_SINGLE("Left Bypass Switch", WM8971_MOUTM1, 7, 1, 0), +SOC_DAPM_SINGLE("Right Playback Switch", WM8971_MOUTM2, 8, 1, 0), +SOC_DAPM_SINGLE("Right Bypass Switch", WM8971_MOUTM2, 7, 1, 0), +}; + +/* Left Line Mux */ +static const struct snd_kcontrol_new wm8971_left_line_controls = +SOC_DAPM_ENUM("Route", wm8971_enum[8]); + +/* Right Line Mux */ +static const struct snd_kcontrol_new wm8971_right_line_controls = +SOC_DAPM_ENUM("Route", wm8971_enum[9]); + +/* Left PGA Mux */ +static const struct snd_kcontrol_new wm8971_left_pga_controls = +SOC_DAPM_ENUM("Route", wm8971_enum[10]); + +/* Right PGA Mux */ +static const struct snd_kcontrol_new wm8971_right_pga_controls = +SOC_DAPM_ENUM("Route", wm8971_enum[11]); + +/* Mono ADC Mux */ +static const struct snd_kcontrol_new wm8971_monomux_controls = +SOC_DAPM_ENUM("Route", wm8971_enum[13]); + +static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = { + SND_SOC_DAPM_MIXER("Left Mixer", SND_SOC_NOPM, 0, 0, + &wm8971_left_mixer_controls[0], + ARRAY_SIZE(wm8971_left_mixer_controls)), + SND_SOC_DAPM_MIXER("Right Mixer", SND_SOC_NOPM, 0, 0, + &wm8971_right_mixer_controls[0], + ARRAY_SIZE(wm8971_right_mixer_controls)), + SND_SOC_DAPM_MIXER("Mono Mixer", WM8971_PWR2, 2, 0, + &wm8971_mono_mixer_controls[0], + ARRAY_SIZE(wm8971_mono_mixer_controls)), + + SND_SOC_DAPM_PGA("Right Out 2", WM8971_PWR2, 3, 0, NULL, 0), + SND_SOC_DAPM_PGA("Left Out 2", WM8971_PWR2, 4, 0, NULL, 0), + SND_SOC_DAPM_PGA("Right Out 1", WM8971_PWR2, 5, 0, NULL, 0), + SND_SOC_DAPM_PGA("Left Out 1", WM8971_PWR2, 6, 0, NULL, 0), + SND_SOC_DAPM_DAC("Right DAC", "Right Playback", WM8971_PWR2, 7, 0), + SND_SOC_DAPM_DAC("Left DAC", "Left Playback", WM8971_PWR2, 8, 0), + SND_SOC_DAPM_PGA("Mono Out 1", WM8971_PWR2, 2, 0, NULL, 0), + + SND_SOC_DAPM_MICBIAS("Mic Bias", WM8971_PWR1, 1, 0), + SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8971_PWR1, 2, 0), + SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8971_PWR1, 3, 0), + + SND_SOC_DAPM_MUX("Left PGA Mux", WM8971_PWR1, 5, 0, + &wm8971_left_pga_controls), + SND_SOC_DAPM_MUX("Right PGA Mux", WM8971_PWR1, 4, 0, + &wm8971_right_pga_controls), + SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0, + &wm8971_left_line_controls), + SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0, + &wm8971_right_line_controls), + + SND_SOC_DAPM_MUX("Left ADC Mux", SND_SOC_NOPM, 0, 0, + &wm8971_monomux_controls), + SND_SOC_DAPM_MUX("Right ADC Mux", SND_SOC_NOPM, 0, 0, + &wm8971_monomux_controls), + + SND_SOC_DAPM_OUTPUT("LOUT1"), + SND_SOC_DAPM_OUTPUT("ROUT1"), + SND_SOC_DAPM_OUTPUT("LOUT2"), + SND_SOC_DAPM_OUTPUT("ROUT2"), + SND_SOC_DAPM_OUTPUT("MONO"), + + SND_SOC_DAPM_INPUT("LINPUT1"), + SND_SOC_DAPM_INPUT("RINPUT1"), + SND_SOC_DAPM_INPUT("MIC"), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + /* left mixer */ + {"Left Mixer", "Playback Switch", "Left DAC"}, + {"Left Mixer", "Left Bypass Switch", "Left Line Mux"}, + {"Left Mixer", "Right Playback Switch", "Right DAC"}, + {"Left Mixer", "Right Bypass Switch", "Right Line Mux"}, + + /* right mixer */ + {"Right Mixer", "Left Playback Switch", "Left DAC"}, + {"Right Mixer", "Left Bypass Switch", "Left Line Mux"}, + {"Right Mixer", "Playback Switch", "Right DAC"}, + {"Right Mixer", "Right Bypass Switch", "Right Line Mux"}, + + /* left out 1 */ + {"Left Out 1", NULL, "Left Mixer"}, + {"LOUT1", NULL, "Left Out 1"}, + + /* left out 2 */ + {"Left Out 2", NULL, "Left Mixer"}, + {"LOUT2", NULL, "Left Out 2"}, + + /* right out 1 */ + {"Right Out 1", NULL, "Right Mixer"}, + {"ROUT1", NULL, "Right Out 1"}, + + /* right out 2 */ + {"Right Out 2", NULL, "Right Mixer"}, + {"ROUT2", NULL, "Right Out 2"}, + + /* mono mixer */ + {"Mono Mixer", "Left Playback Switch", "Left DAC"}, + {"Mono Mixer", "Left Bypass Switch", "Left Line Mux"}, + {"Mono Mixer", "Right Playback Switch", "Right DAC"}, + {"Mono Mixer", "Right Bypass Switch", "Right Line Mux"}, + + /* mono out */ + {"Mono Out", NULL, "Mono Mixer"}, + {"MONO1", NULL, "Mono Out"}, + + /* Left Line Mux */ + {"Left Line Mux", "Line", "LINPUT1"}, + {"Left Line Mux", "PGA", "Left PGA Mux"}, + {"Left Line Mux", "Differential", "Differential Mux"}, + + /* Right Line Mux */ + {"Right Line Mux", "Line", "RINPUT1"}, + {"Right Line Mux", "Mic", "MIC"}, + {"Right Line Mux", "PGA", "Right PGA Mux"}, + {"Right Line Mux", "Differential", "Differential Mux"}, + + /* Left PGA Mux */ + {"Left PGA Mux", "Line", "LINPUT1"}, + {"Left PGA Mux", "Differential", "Differential Mux"}, + + /* Right PGA Mux */ + {"Right PGA Mux", "Line", "RINPUT1"}, + {"Right PGA Mux", "Differential", "Differential Mux"}, + + /* Differential Mux */ + {"Differential Mux", "Line", "LINPUT1"}, + {"Differential Mux", "Line", "RINPUT1"}, + + /* Left ADC Mux */ + {"Left ADC Mux", "Stereo", "Left PGA Mux"}, + {"Left ADC Mux", "Mono (Left)", "Left PGA Mux"}, + {"Left ADC Mux", "Digital Mono", "Left PGA Mux"}, + + /* Right ADC Mux */ + {"Right ADC Mux", "Stereo", "Right PGA Mux"}, + {"Right ADC Mux", "Mono (Right)", "Right PGA Mux"}, + {"Right ADC Mux", "Digital Mono", "Right PGA Mux"}, + + /* ADC */ + {"Left ADC", NULL, "Left ADC Mux"}, + {"Right ADC", NULL, "Right ADC Mux"}, +}; + +static int wm8971_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, wm8971_dapm_widgets, + ARRAY_SIZE(wm8971_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_new_widgets(codec); + + return 0; +} + +struct _coeff_div { + u32 mclk; + u32 rate; + u16 fs; + u8 sr:5; + u8 usb:1; +}; + +/* codec hifi mclk clock divider coefficients */ +static const struct _coeff_div coeff_div[] = { + /* 8k */ + {12288000, 8000, 1536, 0x6, 0x0}, + {11289600, 8000, 1408, 0x16, 0x0}, + {18432000, 8000, 2304, 0x7, 0x0}, + {16934400, 8000, 2112, 0x17, 0x0}, + {12000000, 8000, 1500, 0x6, 0x1}, + + /* 11.025k */ + {11289600, 11025, 1024, 0x18, 0x0}, + {16934400, 11025, 1536, 0x19, 0x0}, + {12000000, 11025, 1088, 0x19, 0x1}, + + /* 16k */ + {12288000, 16000, 768, 0xa, 0x0}, + {18432000, 16000, 1152, 0xb, 0x0}, + {12000000, 16000, 750, 0xa, 0x1}, + + /* 22.05k */ + {11289600, 22050, 512, 0x1a, 0x0}, + {16934400, 22050, 768, 0x1b, 0x0}, + {12000000, 22050, 544, 0x1b, 0x1}, + + /* 32k */ + {12288000, 32000, 384, 0xc, 0x0}, + {18432000, 32000, 576, 0xd, 0x0}, + {12000000, 32000, 375, 0xa, 0x1}, + + /* 44.1k */ + {11289600, 44100, 256, 0x10, 0x0}, + {16934400, 44100, 384, 0x11, 0x0}, + {12000000, 44100, 272, 0x11, 0x1}, + + /* 48k */ + {12288000, 48000, 256, 0x0, 0x0}, + {18432000, 48000, 384, 0x1, 0x0}, + {12000000, 48000, 250, 0x0, 0x1}, + + /* 88.2k */ + {11289600, 88200, 128, 0x1e, 0x0}, + {16934400, 88200, 192, 0x1f, 0x0}, + {12000000, 88200, 136, 0x1f, 0x1}, + + /* 96k */ + {12288000, 96000, 128, 0xe, 0x0}, + {18432000, 96000, 192, 0xf, 0x0}, + {12000000, 96000, 125, 0xe, 0x1}, +}; + +static int get_coeff(int mclk, int rate) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(coeff_div); i++) { + if (coeff_div[i].rate == rate && coeff_div[i].mclk == mclk) + return i; + } + return -EINVAL; +} + +static int wm8971_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct wm8971_priv *wm8971 = codec->private_data; + + switch (freq) { + case 11289600: + case 12000000: + case 12288000: + case 16934400: + case 18432000: + wm8971->sysclk = freq; + return 0; + } + return -EINVAL; +} + +static int wm8971_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 iface = 0; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + iface = 0x0040; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= 0x0002; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + iface |= 0x0001; + break; + case SND_SOC_DAIFMT_DSP_A: + iface |= 0x0003; + break; + case SND_SOC_DAIFMT_DSP_B: + iface |= 0x0013; + break; + default: + return -EINVAL; + } + + /* clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + iface |= 0x0090; + break; + case SND_SOC_DAIFMT_IB_NF: + iface |= 0x0080; + break; + case SND_SOC_DAIFMT_NB_IF: + iface |= 0x0010; + break; + default: + return -EINVAL; + } + + wm8971_write(codec, WM8971_IFACE, iface); + return 0; +} + +static int wm8971_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + struct wm8971_priv *wm8971 = codec->private_data; + u16 iface = wm8971_read_reg_cache(codec, WM8971_IFACE) & 0x1f3; + u16 srate = wm8971_read_reg_cache(codec, WM8971_SRATE) & 0x1c0; + int coeff = get_coeff(wm8971->sysclk, params_rate(params)); + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface |= 0x0004; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface |= 0x0008; + break; + case SNDRV_PCM_FORMAT_S32_LE: + iface |= 0x000c; + break; + } + + /* set iface & srate */ + wm8971_write(codec, WM8971_IFACE, iface); + if (coeff >= 0) + wm8971_write(codec, WM8971_SRATE, srate | + (coeff_div[coeff].sr << 1) | coeff_div[coeff].usb); + + return 0; +} + +static int wm8971_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + u16 mute_reg = wm8971_read_reg_cache(codec, WM8971_ADCDAC) & 0xfff7; + + if (mute) + wm8971_write(codec, WM8971_ADCDAC, mute_reg | 0x8); + else + wm8971_write(codec, WM8971_ADCDAC, mute_reg); + return 0; +} + +static int wm8971_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + u16 pwr_reg = wm8971_read_reg_cache(codec, WM8971_PWR1) & 0xfe3e; + + switch (level) { + case SND_SOC_BIAS_ON: + /* set vmid to 50k and unmute dac */ + wm8971_write(codec, WM8971_PWR1, pwr_reg | 0x00c1); + break; + case SND_SOC_BIAS_PREPARE: + break; + case SND_SOC_BIAS_STANDBY: + /* mute dac and set vmid to 500k, enable VREF */ + wm8971_write(codec, WM8971_PWR1, pwr_reg | 0x0140); + break; + case SND_SOC_BIAS_OFF: + wm8971_write(codec, WM8971_PWR1, 0x0001); + break; + } + codec->bias_level = level; + return 0; +} + +#define WM8971_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) + +#define WM8971_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE) + +struct snd_soc_dai wm8971_dai = { + .name = "WM8971", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = WM8971_RATES, + .formats = WM8971_FORMATS,}, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = WM8971_RATES, + .formats = WM8971_FORMATS,}, + .ops = { + .hw_params = wm8971_pcm_hw_params, + }, + .dai_ops = { + .digital_mute = wm8971_mute, + .set_fmt = wm8971_set_dai_fmt, + .set_sysclk = wm8971_set_dai_sysclk, + }, +}; +EXPORT_SYMBOL_GPL(wm8971_dai); + +static void wm8971_work(struct work_struct *work) +{ + struct snd_soc_codec *codec = + container_of(work, struct snd_soc_codec, delayed_work.work); + wm8971_set_bias_level(codec, codec->bias_level); +} + +static int wm8971_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static int wm8971_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + int i; + u8 data[2]; + u16 *cache = codec->reg_cache; + u16 reg; + + /* Sync reg_cache with the hardware */ + for (i = 0; i < ARRAY_SIZE(wm8971_reg); i++) { + if (i + 1 == WM8971_RESET) + continue; + data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001); + data[1] = cache[i] & 0x00ff; + codec->hw_write(codec->control_data, data, 2); + } + + wm8971_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + /* charge wm8971 caps */ + if (codec->suspend_bias_level == SND_SOC_BIAS_ON) { + reg = wm8971_read_reg_cache(codec, WM8971_PWR1) & 0xfe3e; + wm8971_write(codec, WM8971_PWR1, reg | 0x01c0); + codec->bias_level = SND_SOC_BIAS_ON; + queue_delayed_work(wm8971_workq, &codec->delayed_work, + msecs_to_jiffies(1000)); + } + + return 0; +} + +static int wm8971_init(struct snd_soc_device *socdev) +{ + struct snd_soc_codec *codec = socdev->codec; + int reg, ret = 0; + + codec->name = "WM8971"; + codec->owner = THIS_MODULE; + codec->read = wm8971_read_reg_cache; + codec->write = wm8971_write; + codec->set_bias_level = wm8971_set_bias_level; + codec->dai = &wm8971_dai; + codec->reg_cache_size = ARRAY_SIZE(wm8971_reg); + codec->num_dai = 1; + codec->reg_cache = kmemdup(wm8971_reg, sizeof(wm8971_reg), GFP_KERNEL); + + if (codec->reg_cache == NULL) + return -ENOMEM; + + wm8971_reset(codec); + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + printk(KERN_ERR "wm8971: failed to create pcms\n"); + goto pcm_err; + } + + /* charge output caps - set vmid to 5k for quick power up */ + reg = wm8971_read_reg_cache(codec, WM8971_PWR1) & 0xfe3e; + wm8971_write(codec, WM8971_PWR1, reg | 0x01c0); + codec->bias_level = SND_SOC_BIAS_STANDBY; + queue_delayed_work(wm8971_workq, &codec->delayed_work, + msecs_to_jiffies(1000)); + + /* set the update bits */ + reg = wm8971_read_reg_cache(codec, WM8971_LDAC); + wm8971_write(codec, WM8971_LDAC, reg | 0x0100); + reg = wm8971_read_reg_cache(codec, WM8971_RDAC); + wm8971_write(codec, WM8971_RDAC, reg | 0x0100); + + reg = wm8971_read_reg_cache(codec, WM8971_LOUT1V); + wm8971_write(codec, WM8971_LOUT1V, reg | 0x0100); + reg = wm8971_read_reg_cache(codec, WM8971_ROUT1V); + wm8971_write(codec, WM8971_ROUT1V, reg | 0x0100); + + reg = wm8971_read_reg_cache(codec, WM8971_LOUT2V); + wm8971_write(codec, WM8971_LOUT2V, reg | 0x0100); + reg = wm8971_read_reg_cache(codec, WM8971_ROUT2V); + wm8971_write(codec, WM8971_ROUT2V, reg | 0x0100); + + reg = wm8971_read_reg_cache(codec, WM8971_LINVOL); + wm8971_write(codec, WM8971_LINVOL, reg | 0x0100); + reg = wm8971_read_reg_cache(codec, WM8971_RINVOL); + wm8971_write(codec, WM8971_RINVOL, reg | 0x0100); + + wm8971_add_controls(codec); + wm8971_add_widgets(codec); + ret = snd_soc_register_card(socdev); + if (ret < 0) { + printk(KERN_ERR "wm8971: failed to register card\n"); + goto card_err; + } + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + kfree(codec->reg_cache); + return ret; +} + +/* If the i2c layer weren't so broken, we could pass this kind of data + around */ +static struct snd_soc_device *wm8971_socdev; + +#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE) + +static int wm8971_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct snd_soc_device *socdev = wm8971_socdev; + struct snd_soc_codec *codec = socdev->codec; + int ret; + + i2c_set_clientdata(i2c, codec); + + codec->control_data = i2c; + + ret = wm8971_init(socdev); + if (ret < 0) + pr_err("failed to initialise WM8971\n"); + + return ret; +} + +static int wm8971_i2c_remove(struct i2c_client *client) +{ + struct snd_soc_codec *codec = i2c_get_clientdata(client); + kfree(codec->reg_cache); + return 0; +} + +static const struct i2c_device_id wm8971_i2c_id[] = { + { "wm8971", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8971_i2c_id); + +static struct i2c_driver wm8971_i2c_driver = { + .driver = { + .name = "WM8971 I2C Codec", + .owner = THIS_MODULE, + }, + .probe = wm8971_i2c_probe, + .remove = wm8971_i2c_remove, + .id_table = wm8971_i2c_id, +}; + +static int wm8971_add_i2c_device(struct platform_device *pdev, + const struct wm8971_setup_data *setup) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + int ret; + + ret = i2c_add_driver(&wm8971_i2c_driver); + if (ret != 0) { + dev_err(&pdev->dev, "can't add i2c driver\n"); + return ret; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = setup->i2c_address; + strlcpy(info.type, "wm8971", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(setup->i2c_bus); + if (!adapter) { + dev_err(&pdev->dev, "can't get i2c adapter %d\n", + setup->i2c_bus); + goto err_driver; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + goto err_driver; + } + + return 0; + +err_driver: + i2c_del_driver(&wm8971_i2c_driver); + return -ENODEV; +} + +#endif + +static int wm8971_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct wm8971_setup_data *setup; + struct snd_soc_codec *codec; + struct wm8971_priv *wm8971; + int ret = 0; + + pr_info("WM8971 Audio Codec %s", WM8971_VERSION); + + setup = socdev->codec_data; + codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (codec == NULL) + return -ENOMEM; + + wm8971 = kzalloc(sizeof(struct wm8971_priv), GFP_KERNEL); + if (wm8971 == NULL) { + kfree(codec); + return -ENOMEM; + } + + codec->private_data = wm8971; + socdev->codec = codec; + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + wm8971_socdev = socdev; + + INIT_DELAYED_WORK(&codec->delayed_work, wm8971_work); + wm8971_workq = create_workqueue("wm8971"); + if (wm8971_workq == NULL) { + kfree(codec->private_data); + kfree(codec); + return -ENOMEM; + } + +#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE) + if (setup->i2c_address) { + codec->hw_write = (hw_write_t)i2c_master_send; + ret = wm8971_add_i2c_device(pdev, setup); + } +#endif + /* Add other interfaces here */ + + if (ret != 0) { + destroy_workqueue(wm8971_workq); + kfree(codec->private_data); + kfree(codec); + } + + return ret; +} + +/* power down chip */ +static int wm8971_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + if (codec->control_data) + wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF); + if (wm8971_workq) + destroy_workqueue(wm8971_workq); + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE) + i2c_unregister_device(codec->control_data); + i2c_del_driver(&wm8971_i2c_driver); +#endif + kfree(codec->private_data); + kfree(codec); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm8971 = { + .probe = wm8971_probe, + .remove = wm8971_remove, + .suspend = wm8971_suspend, + .resume = wm8971_resume, +}; + +EXPORT_SYMBOL_GPL(soc_codec_dev_wm8971); + +MODULE_DESCRIPTION("ASoC WM8971 driver"); +MODULE_AUTHOR("Lab126"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8971.h b/sound/soc/codecs/wm8971.h new file mode 100644 index 00000000000..ef4f08f9f34 --- /dev/null +++ b/sound/soc/codecs/wm8971.h @@ -0,0 +1,64 @@ +/* + * wm8971.h -- audio driver for WM8971 + * + * Copyright 2005 Lab126, Inc. + * + * Author: Kenneth Kiraly <kiraly@lab126.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef _WM8971_H +#define _WM8971_H + +#define WM8971_LINVOL 0x00 +#define WM8971_RINVOL 0x01 +#define WM8971_LOUT1V 0x02 +#define WM8971_ROUT1V 0x03 +#define WM8971_ADCDAC 0x05 +#define WM8971_IFACE 0x07 +#define WM8971_SRATE 0x08 +#define WM8971_LDAC 0x0a +#define WM8971_RDAC 0x0b +#define WM8971_BASS 0x0c +#define WM8971_TREBLE 0x0d +#define WM8971_RESET 0x0f +#define WM8971_ALC1 0x11 +#define WM8971_ALC2 0x12 +#define WM8971_ALC3 0x13 +#define WM8971_NGATE 0x14 +#define WM8971_LADC 0x15 +#define WM8971_RADC 0x16 +#define WM8971_ADCTL1 0x17 +#define WM8971_ADCTL2 0x18 +#define WM8971_PWR1 0x19 +#define WM8971_PWR2 0x1a +#define WM8971_ADCTL3 0x1b +#define WM8971_ADCIN 0x1f +#define WM8971_LADCIN 0x20 +#define WM8971_RADCIN 0x21 +#define WM8971_LOUTM1 0x22 +#define WM8971_LOUTM2 0x23 +#define WM8971_ROUTM1 0x24 +#define WM8971_ROUTM2 0x25 +#define WM8971_MOUTM1 0x26 +#define WM8971_MOUTM2 0x27 +#define WM8971_LOUT2V 0x28 +#define WM8971_ROUT2V 0x29 +#define WM8971_MOUTV 0x2A + +#define WM8971_SYSCLK 0 + +struct wm8971_setup_data { + int i2c_bus; + unsigned short i2c_address; +}; + +extern struct snd_soc_dai wm8971_dai; +extern struct snd_soc_codec_device soc_codec_dev_wm8971; + +#endif diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c index e44153fa38d..63410d7b5ef 100644 --- a/sound/soc/codecs/wm8990.c +++ b/sound/soc/codecs/wm8990.c @@ -1477,83 +1477,86 @@ static struct snd_soc_device *wm8990_socdev; * low = 0x34 * high = 0x36 */ -static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; -/* Magic definition of all other variables and things */ -I2C_CLIENT_INSMOD; - -static struct i2c_driver wm8990_i2c_driver; -static struct i2c_client client_template; - -static int wm8990_codec_probe(struct i2c_adapter *adap, int addr, int kind) +static int wm8990_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8990_socdev; - struct wm8990_setup_data *setup = socdev->codec_data; struct snd_soc_codec *codec = socdev->codec; - struct i2c_client *i2c; int ret; - if (addr != setup->i2c_address) - return -ENODEV; - - client_template.adapter = adap; - client_template.addr = addr; - - i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); - return -ENOMEM; - } i2c_set_clientdata(i2c, codec); codec->control_data = i2c; - ret = i2c_attach_client(i2c); - if (ret < 0) { - pr_err("failed to attach codec at addr %x\n", addr); - goto err; - } - ret = wm8990_init(socdev); - if (ret < 0) { + if (ret < 0) pr_err("failed to initialise WM8990\n"); - goto err; - } - return ret; -err: - kfree(codec); - kfree(i2c); return ret; } -static int wm8990_i2c_detach(struct i2c_client *client) +static int wm8990_i2c_remove(struct i2c_client *client) { struct snd_soc_codec *codec = i2c_get_clientdata(client); - i2c_detach_client(client); kfree(codec->reg_cache); - kfree(client); return 0; } -static int wm8990_i2c_attach(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, wm8990_codec_probe); -} +static const struct i2c_device_id wm8990_i2c_id[] = { + { "wm8990", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8990_i2c_id); static struct i2c_driver wm8990_i2c_driver = { .driver = { .name = "WM8990 I2C Codec", .owner = THIS_MODULE, }, - .attach_adapter = wm8990_i2c_attach, - .detach_client = wm8990_i2c_detach, - .command = NULL, + .probe = wm8990_i2c_probe, + .remove = wm8990_i2c_remove, + .id_table = wm8990_i2c_id, }; -static struct i2c_client client_template = { - .name = "WM8990", - .driver = &wm8990_i2c_driver, -}; +static int wm8990_add_i2c_device(struct platform_device *pdev, + const struct wm8990_setup_data *setup) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + int ret; + + ret = i2c_add_driver(&wm8990_i2c_driver); + if (ret != 0) { + dev_err(&pdev->dev, "can't add i2c driver\n"); + return ret; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = setup->i2c_address; + strlcpy(info.type, "wm8990", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(setup->i2c_bus); + if (!adapter) { + dev_err(&pdev->dev, "can't get i2c adapter %d\n", + setup->i2c_bus); + goto err_driver; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + goto err_driver; + } + + return 0; + +err_driver: + i2c_del_driver(&wm8990_i2c_driver); + return -ENODEV; +} #endif static int wm8990_probe(struct platform_device *pdev) @@ -1562,7 +1565,7 @@ static int wm8990_probe(struct platform_device *pdev) struct wm8990_setup_data *setup; struct snd_soc_codec *codec; struct wm8990_priv *wm8990; - int ret = 0; + int ret; pr_info("WM8990 Audio Codec %s\n", WM8990_VERSION); @@ -1584,17 +1587,19 @@ static int wm8990_probe(struct platform_device *pdev) INIT_LIST_HEAD(&codec->dapm_paths); wm8990_socdev = socdev; + ret = -ENODEV; + #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) if (setup->i2c_address) { - normal_i2c[0] = setup->i2c_address; codec->hw_write = (hw_write_t)i2c_master_send; - ret = i2c_add_driver(&wm8990_i2c_driver); - if (ret != 0) - printk(KERN_ERR "can't add i2c driver"); + ret = wm8990_add_i2c_device(pdev, setup); } -#else - /* Add other interfaces here */ #endif + + if (ret != 0) { + kfree(codec->private_data); + kfree(codec); + } return ret; } @@ -1609,6 +1614,7 @@ static int wm8990_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_unregister_device(codec->control_data); i2c_del_driver(&wm8990_i2c_driver); #endif kfree(codec->private_data); diff --git a/sound/soc/codecs/wm8990.h b/sound/soc/codecs/wm8990.h index 0a08325d544..0e192f3b078 100644 --- a/sound/soc/codecs/wm8990.h +++ b/sound/soc/codecs/wm8990.h @@ -827,6 +827,7 @@ #define WM8990_AINRMUX_PWR_BIT 3 struct wm8990_setup_data { + unsigned i2c_bus; unsigned short i2c_address; }; diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index 38d1fe0971f..441d0580db1 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -419,8 +419,12 @@ SND_SOC_DAPM_MIXER("Line Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_MIXER("Capture Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_DAC("Voice DAC", "Voice Playback", AC97_EXTENDED_MID, 12, 1), SND_SOC_DAPM_DAC("Aux DAC", "Aux Playback", AC97_EXTENDED_MID, 11, 1), -SND_SOC_DAPM_ADC("Left ADC", "Left HiFi Capture", AC97_EXTENDED_MID, 5, 1), -SND_SOC_DAPM_ADC("Right ADC", "Right HiFi Capture", AC97_EXTENDED_MID, 4, 1), +SND_SOC_DAPM_PGA("Left ADC", AC97_EXTENDED_MID, 5, 1, NULL, 0), +SND_SOC_DAPM_PGA("Right ADC", AC97_EXTENDED_MID, 4, 1, NULL, 0), +SND_SOC_DAPM_ADC("Left HiFi ADC", "Left HiFi Capture", SND_SOC_NOPM, 0, 0), +SND_SOC_DAPM_ADC("Right HiFi ADC", "Right HiFi Capture", SND_SOC_NOPM, 0, 0), +SND_SOC_DAPM_ADC("Left Voice ADC", "Left Voice Capture", SND_SOC_NOPM, 0, 0), +SND_SOC_DAPM_ADC("Right Voice ADC", "Right Voice Capture", SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_PGA("Left Headphone", AC97_EXTENDED_MSTATUS, 10, 1, NULL, 0), SND_SOC_DAPM_PGA("Right Headphone", AC97_EXTENDED_MSTATUS, 9, 1, NULL, 0), SND_SOC_DAPM_PGA("Left Speaker", AC97_EXTENDED_MSTATUS, 8, 1, NULL, 0), @@ -583,9 +587,13 @@ static const struct snd_soc_dapm_route audio_map[] = { /* left ADC */ {"Left ADC", NULL, "Left Capture Source"}, + {"Left Voice ADC", NULL, "Left ADC"}, + {"Left HiFi ADC", NULL, "Left ADC"}, /* right ADC */ {"Right ADC", NULL, "Right Capture Source"}, + {"Right Voice ADC", NULL, "Right ADC"}, + {"Right HiFi ADC", NULL, "Right ADC"}, /* mic */ {"Mic A Pre Amp", NULL, "Mic A Source"}, @@ -949,17 +957,17 @@ static int wm9713_pcm_hw_params(struct snd_pcm_substream *substream, static void wm9713_voiceshutdown(struct snd_pcm_substream *substream) { - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_device *socdev = rtd->socdev; - struct snd_soc_codec *codec = socdev->codec; - u16 status; - - /* Gracefully shut down the voice interface. */ - status = ac97_read(codec, AC97_EXTENDED_STATUS) | 0x1000; - ac97_write(codec, AC97_HANDSET_RATE, 0x0280); - schedule_timeout_interruptible(msecs_to_jiffies(1)); - ac97_write(codec, AC97_HANDSET_RATE, 0x0F80); - ac97_write(codec, AC97_EXTENDED_MID, status); + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + u16 status; + + /* Gracefully shut down the voice interface. */ + status = ac97_read(codec, AC97_EXTENDED_STATUS) | 0x1000; + ac97_write(codec, AC97_HANDSET_RATE, 0x0280); + schedule_timeout_interruptible(msecs_to_jiffies(1)); + ac97_write(codec, AC97_HANDSET_RATE, 0x0F80); + ac97_write(codec, AC97_EXTENDED_MID, status); } static int ac97_hifi_prepare(struct snd_pcm_substream *substream) |