summaryrefslogtreecommitdiffstats
path: root/sound/soc/pxa
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/pxa')
-rw-r--r--sound/soc/pxa/Kconfig3
-rw-r--r--sound/soc/pxa/corgi.c35
-rw-r--r--sound/soc/pxa/poodle.c1
-rw-r--r--sound/soc/pxa/pxa2xx-ac97.c282
-rw-r--r--sound/soc/pxa/pxa2xx-i2s.c63
-rw-r--r--sound/soc/pxa/pxa2xx-pcm.c265
-rw-r--r--sound/soc/pxa/pxa2xx-pcm.h15
-rw-r--r--sound/soc/pxa/spitz.c47
8 files changed, 116 insertions, 595 deletions
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 9212c37a33b..f8c1cdd940a 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -1,6 +1,7 @@
config SND_PXA2XX_SOC
tristate "SoC Audio for the Intel PXA2xx chip"
depends on ARCH_PXA
+ select SND_PXA2XX_LIB
help
Say Y or M if you want to add support for codecs attached to
the PXA2xx AC97, I2S or SSP interface. You will also need
@@ -13,6 +14,8 @@ config SND_PXA2XX_AC97
config SND_PXA2XX_SOC_AC97
tristate
select AC97_BUS
+ select SND_ARM
+ select SND_PXA2XX_LIB_AC97
select SND_SOC_AC97_BUS
config SND_PXA2XX_SOC_I2S
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 0a53f72077f..1a8373de7f3 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -18,13 +18,13 @@
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <asm/hardware/scoop.h>
#include <mach/pxa-regs.h>
#include <mach/hardware.h>
#include <mach/corgi.h>
@@ -54,8 +54,8 @@ static void corgi_ext_control(struct snd_soc_codec *codec)
switch (corgi_jack_func) {
case CORGI_HP:
/* set = unmute headphone */
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 1);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 1);
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_enable_pin(codec, "Headphone Jack");
@@ -63,24 +63,24 @@ static void corgi_ext_control(struct snd_soc_codec *codec)
break;
case CORGI_MIC:
/* reset = mute headphone */
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 0);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 0);
snd_soc_dapm_enable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_disable_pin(codec, "Headphone Jack");
snd_soc_dapm_disable_pin(codec, "Headset Jack");
break;
case CORGI_LINE:
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 0);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 0);
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_enable_pin(codec, "Line Jack");
snd_soc_dapm_disable_pin(codec, "Headphone Jack");
snd_soc_dapm_disable_pin(codec, "Headset Jack");
break;
case CORGI_HEADSET:
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 0);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 1);
snd_soc_dapm_enable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_disable_pin(codec, "Headphone Jack");
@@ -114,8 +114,8 @@ static int corgi_shutdown(struct snd_pcm_substream *substream)
struct snd_soc_codec *codec = rtd->socdev->codec;
/* set = unmute headphone */
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 1);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 1);
return 0;
}
@@ -218,22 +218,14 @@ static int corgi_set_spk(struct snd_kcontrol *kcontrol,
static int corgi_amp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
- if (SND_SOC_DAPM_EVENT_ON(event))
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
-
+ gpio_set_value(CORGI_GPIO_APM_ON, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
static int corgi_mic_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
- if (SND_SOC_DAPM_EVENT_ON(event))
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MIC_BIAS);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MIC_BIAS);
-
+ gpio_set_value(CORGI_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
@@ -330,6 +322,7 @@ static struct snd_soc_machine snd_soc_machine_corgi = {
/* corgi audio private data */
static struct wm8731_setup_data corgi_wm8731_setup = {
+ .i2c_bus = 0,
.i2c_address = 0x1b,
};
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index a4697f7e292..f84f7d8db09 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -284,6 +284,7 @@ static struct snd_soc_machine snd_soc_machine_poodle = {
/* poodle audio private data */
static struct wm8731_setup_data poodle_wm8731_setup = {
+ .i2c_bus = 0,
.i2c_address = 0x1b,
};
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index d94a495bd6b..a7a3a9c5c6f 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -13,225 +13,30 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/wait.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
#include <sound/core.h>
-#include <sound/pcm.h>
#include <sound/ac97_codec.h>
-#include <sound/initval.h>
#include <sound/soc.h>
+#include <sound/pxa2xx-lib.h>
-#include <asm/irq.h>
-#include <linux/mutex.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
-#include <mach/audio.h>
#include "pxa2xx-pcm.h"
#include "pxa2xx-ac97.h"
-static DEFINE_MUTEX(car_mutex);
-static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
-static volatile long gsr_bits;
-static struct clk *ac97_clk;
-#ifdef CONFIG_PXA27x
-static struct clk *ac97conf_clk;
-#endif
-
-/*
- * Beware PXA27x bugs:
- *
- * o Slot 12 read from modem space will hang controller.
- * o CDONE, SDONE interrupt fails after any slot 12 IO.
- *
- * We therefore have an hybrid approach for waiting on SDONE (interrupt or
- * 1 jiffy timeout if interrupt never comes).
- */
-
-static unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97,
- unsigned short reg)
-{
- unsigned short val = -1;
- volatile u32 *reg_addr;
-
- mutex_lock(&car_mutex);
-
- /* set up primary or secondary codec/modem space */
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
- reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
-#else
- if (reg == AC97_GPIO_STATUS)
- reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
- else
- reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
-#endif
- reg_addr += (reg >> 1);
-
-#ifndef CONFIG_PXA27x
- if (reg == AC97_GPIO_STATUS) {
- /* read from controller cache */
- val = *reg_addr;
- goto out;
- }
-#endif
-
- /* start read access across the ac97 link */
- GSR = GSR_CDONE | GSR_SDONE;
- gsr_bits = 0;
- val = *reg_addr;
-
- wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
- if (!((GSR | gsr_bits) & GSR_SDONE)) {
- printk(KERN_ERR "%s: read error (ac97_reg=%x GSR=%#lx)\n",
- __func__, reg, GSR | gsr_bits);
- val = -1;
- goto out;
- }
-
- /* valid data now */
- GSR = GSR_CDONE | GSR_SDONE;
- gsr_bits = 0;
- val = *reg_addr;
- /* but we've just started another cycle... */
- wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
-
-out: mutex_unlock(&car_mutex);
- return val;
-}
-
-static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
- unsigned short val)
-{
- volatile u32 *reg_addr;
-
- mutex_lock(&car_mutex);
-
- /* set up primary or secondary codec/modem space */
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
- reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
-#else
- if (reg == AC97_GPIO_STATUS)
- reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
- else
- reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
-#endif
- reg_addr += (reg >> 1);
-
- GSR = GSR_CDONE | GSR_SDONE;
- gsr_bits = 0;
- *reg_addr = val;
- wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1);
- if (!((GSR | gsr_bits) & GSR_CDONE))
- printk(KERN_ERR "%s: write error (ac97_reg=%x GSR=%#lx)\n",
- __func__, reg, GSR | gsr_bits);
-
- mutex_unlock(&car_mutex);
-}
-
static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97)
{
-#ifdef CONFIG_PXA3xx
- int timeout = 100;
-#endif
- gsr_bits = 0;
-
-#ifdef CONFIG_PXA27x
- /* warm reset broken on Bulverde,
- so manually keep AC97 reset high */
- pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH);
- udelay(10);
- GCR |= GCR_WARM_RST;
- pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
- udelay(500);
-#elif defined(CONFIG_PXA3xx)
- /* Can't use interrupts */
- GCR |= GCR_WARM_RST;
- while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
- mdelay(1);
-#else
- GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
- wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
-#endif
-
- if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
- printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
- __func__, gsr_bits);
+ pxa2xx_ac97_try_warm_reset(ac97);
- GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
- GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
+ pxa2xx_ac97_finish_reset(ac97);
}
static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97)
{
-#ifdef CONFIG_PXA3xx
- int timeout = 1000;
-
- /* Hold CLKBPB for 100us */
- GCR = 0;
- GCR = GCR_CLKBPB;
- udelay(100);
- GCR = 0;
-#endif
+ pxa2xx_ac97_try_cold_reset(ac97);
- GCR &= GCR_COLD_RST; /* clear everything but nCRST */
- GCR &= ~GCR_COLD_RST; /* then assert nCRST */
-
- gsr_bits = 0;
-#ifdef CONFIG_PXA27x
- /* PXA27x Developers Manual section 13.5.2.2.1 */
- clk_enable(ac97conf_clk);
- udelay(5);
- clk_disable(ac97conf_clk);
- GCR = GCR_COLD_RST;
- udelay(50);
-#elif defined(CONFIG_PXA3xx)
- /* Can't use interrupts on PXA3xx */
- GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
-
- GCR = GCR_WARM_RST | GCR_COLD_RST;
- while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--)
- mdelay(10);
-#else
- GCR = GCR_COLD_RST;
- GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
- wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
-#endif
-
- if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
- printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
- __func__, gsr_bits);
-
- GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
- GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
-}
-
-static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
-{
- long status;
-
- status = GSR;
- if (status) {
- GSR = status;
- gsr_bits |= status;
- wake_up(&gsr_wq);
-
-#ifdef CONFIG_PXA27x
- /* Although we don't use those we still need to clear them
- since they tend to spuriously trigger when MMC is used
- (hardware bug? go figure)... */
- MISR = MISR_EOC;
- PISR = PISR_EOC;
- MCSR = MCSR_EOC;
-#endif
-
- return IRQ_HANDLED;
- }
-
- return IRQ_NONE;
+ pxa2xx_ac97_finish_reset(ac97);
}
struct snd_ac97_bus_ops soc_ac97_ops = {
@@ -244,7 +49,7 @@ struct snd_ac97_bus_ops soc_ac97_ops = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = {
.name = "AC97 PCM Stereo out",
.dev_addr = __PREG(PCDR),
- .drcmr = &DRCMRTXPCDR,
+ .drcmr = &DRCMR(12),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST32 | DCMD_WIDTH4,
};
@@ -252,7 +57,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = {
.name = "AC97 PCM Stereo in",
.dev_addr = __PREG(PCDR),
- .drcmr = &DRCMRRXPCDR,
+ .drcmr = &DRCMR(11),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST32 | DCMD_WIDTH4,
};
@@ -260,7 +65,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = {
.name = "AC97 Aux PCM (Slot 5) Mono out",
.dev_addr = __PREG(MODR),
- .drcmr = &DRCMRTXMODR,
+ .drcmr = &DRCMR(10),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST16 | DCMD_WIDTH2,
};
@@ -268,7 +73,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = {
.name = "AC97 Aux PCM (Slot 5) Mono in",
.dev_addr = __PREG(MODR),
- .drcmr = &DRCMRRXMODR,
+ .drcmr = &DRCMR(9),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH2,
};
@@ -276,7 +81,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_mic_mono_in = {
.name = "AC97 Mic PCM (Slot 6) Mono in",
.dev_addr = __PREG(MCDR),
- .drcmr = &DRCMRRXMCDR,
+ .drcmr = &DRCMR(8),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH2,
};
@@ -285,24 +90,13 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_mic_mono_in = {
static int pxa2xx_ac97_suspend(struct platform_device *pdev,
struct snd_soc_dai *dai)
{
- GCR |= GCR_ACLINK_OFF;
- clk_disable(ac97_clk);
- return 0;
+ return pxa2xx_ac97_hw_suspend();
}
static int pxa2xx_ac97_resume(struct platform_device *pdev,
struct snd_soc_dai *dai)
{
- pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
- pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
- pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
- pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
-#ifdef CONFIG_PXA27x
- /* Use GPIO 113 as AC97 Reset on Bulverde */
- pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
-#endif
- clk_enable(ac97_clk);
- return 0;
+ return pxa2xx_ac97_hw_resume();
}
#else
@@ -313,61 +107,13 @@ static int pxa2xx_ac97_resume(struct platform_device *pdev,
static int pxa2xx_ac97_probe(struct platform_device *pdev,
struct snd_soc_dai *dai)
{
- int ret;
-
- ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
- if (ret < 0)
- goto err;
-
- pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
- pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
- pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
- pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
-#ifdef CONFIG_PXA27x
- /* Use GPIO 113 as AC97 Reset on Bulverde */
- pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
-
- ac97conf_clk = clk_get(&pdev->dev, "AC97CONFCLK");
- if (IS_ERR(ac97conf_clk)) {
- ret = PTR_ERR(ac97conf_clk);
- ac97conf_clk = NULL;
- goto err_irq;
- }
-#endif
- ac97_clk = clk_get(&pdev->dev, "AC97CLK");
- if (IS_ERR(ac97_clk)) {
- ret = PTR_ERR(ac97_clk);
- ac97_clk = NULL;
- goto err_irq;
- }
- clk_enable(ac97_clk);
- return 0;
-
- err_irq:
- GCR |= GCR_ACLINK_OFF;
-#ifdef CONFIG_PXA27x
- if (ac97conf_clk) {
- clk_put(ac97conf_clk);
- ac97conf_clk = NULL;
- }
-#endif
- free_irq(IRQ_AC97, NULL);
- err:
- return ret;
+ return pxa2xx_ac97_hw_probe(pdev);
}
static void pxa2xx_ac97_remove(struct platform_device *pdev,
struct snd_soc_dai *dai)
{
- GCR |= GCR_ACLINK_OFF;
- free_irq(IRQ_AC97, NULL);
-#ifdef CONFIG_PXA27x
- clk_put(ac97conf_clk);
- ac97conf_clk = NULL;
-#endif
- clk_disable(ac97_clk);
- clk_put(ac97_clk);
- ac97_clk = NULL;
+ pxa2xx_ac97_hw_remove(pdev);
}
static int pxa2xx_ac97_hw_params(struct snd_pcm_substream *substream,
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index c796b188277..2fb58298513 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -21,6 +21,7 @@
#include <sound/pcm.h>
#include <sound/initval.h>
#include <sound/soc.h>
+#include <sound/pxa2xx-lib.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
@@ -30,6 +31,54 @@
#include "pxa2xx-pcm.h"
#include "pxa2xx-i2s.h"
+struct pxa2xx_gpio {
+ u32 sys;
+ u32 rx;
+ u32 tx;
+ u32 clk;
+ u32 frm;
+};
+
+/*
+ * I2S Controller Register and Bit Definitions
+ */
+#define SACR0 __REG(0x40400000) /* Global Control Register */
+#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
+#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */
+#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */
+#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
+#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
+
+#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */
+#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */
+#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */
+#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */
+#define SACR0_ENB (1 << 0) /* Enable I2S Link */
+#define SACR1_ENLBF (1 << 5) /* Enable Loopback */
+#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */
+#define SACR1_DREC (1 << 3) /* Disable Recording Function */
+#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */
+
+#define SASR0_I2SOFF (1 << 7) /* Controller Status */
+#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */
+#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */
+#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */
+#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */
+#define SASR0_BSY (1 << 2) /* I2S Busy */
+#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */
+#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */
+
+#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */
+#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */
+
+#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */
+#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */
+#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */
+#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */
+
struct pxa_i2s_port {
u32 sadiv;
u32 sacr0;
@@ -44,7 +93,7 @@ static struct clk *clk_i2s;
static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_out = {
.name = "I2S PCM Stereo out",
.dev_addr = __PREG(SADR),
- .drcmr = &DRCMRTXSADR,
+ .drcmr = &DRCMR(3),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST32 | DCMD_WIDTH4,
};
@@ -52,7 +101,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_out = {
static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_in = {
.name = "I2S PCM Stereo in",
.dev_addr = __PREG(SADR),
- .drcmr = &DRCMRRXSADR,
+ .drcmr = &DRCMR(2),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST32 | DCMD_WIDTH4,
};
@@ -65,11 +114,6 @@ static struct pxa2xx_gpio gpio_bus[] = {
.frm = GPIO31_SYNC_I2S_MD,
},
{ /* I2S SoC Master */
-#ifdef CONFIG_PXA27x
- .sys = GPIO113_I2S_SYSCLK_MD,
-#else
- .sys = GPIO32_SYSCLK_I2S_MD,
-#endif
.rx = GPIO29_SDATA_IN_I2S_MD,
.tx = GPIO30_SDATA_OUT_I2S_MD,
.clk = GPIO28_BITCLK_OUT_I2S_MD,
@@ -343,6 +387,11 @@ static struct platform_driver pxa2xx_i2s_driver = {
static int __init pxa2xx_i2s_init(void)
{
+ if (cpu_is_pxa27x())
+ gpio_bus[1].sys = GPIO113_I2S_SYSCLK_MD;
+ else
+ gpio_bus[1].sys = GPIO32_SYSCLK_I2S_MD;
+
clk_i2s = ERR_PTR(-ENOENT);
return platform_driver_register(&pxa2xx_i2s_driver);
}
diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c
index 4345f387fe4..afcd892cd2f 100644
--- a/sound/soc/pxa/pxa2xx-pcm.c
+++ b/sound/soc/pxa/pxa2xx-pcm.c
@@ -10,64 +10,14 @@
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
#include <sound/soc.h>
-
-#include <asm/dma.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/audio.h>
+#include <sound/pxa2xx-lib.h>
#include "pxa2xx-pcm.h"
-
-static const struct snd_pcm_hardware pxa2xx_pcm_hardware = {
- .info = SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_PAUSE |
- SNDRV_PCM_INFO_RESUME,
- .formats = SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_S24_LE |
- SNDRV_PCM_FMTBIT_S32_LE,
- .period_bytes_min = 32,
- .period_bytes_max = 8192 - 32,
- .periods_min = 1,
- .periods_max = PAGE_SIZE/sizeof(pxa_dma_desc),
- .buffer_bytes_max = 128 * 1024,
- .fifo_size = 32,
-};
-
-struct pxa2xx_runtime_data {
- int dma_ch;
- struct pxa2xx_pcm_dma_params *params;
- pxa_dma_desc *dma_desc_array;
- dma_addr_t dma_desc_array_phys;
-};
-
-static void pxa2xx_pcm_dma_irq(int dma_ch, void *dev_id)
-{
- struct snd_pcm_substream *substream = dev_id;
- struct pxa2xx_runtime_data *prtd = substream->runtime->private_data;
- int dcsr;
-
- dcsr = DCSR(dma_ch);
- DCSR(dma_ch) = dcsr & ~DCSR_STOPIRQEN;
-
- if (dcsr & DCSR_ENDINTR) {
- snd_pcm_period_elapsed(substream);
- } else {
- printk(KERN_ERR "%s: DMA error on channel %d (DCSR=%#x)\n",
- prtd->params->name, dma_ch, dcsr);
- }
-}
+#include "../../arm/pxa2xx-pcm.h"
static int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
@@ -76,10 +26,6 @@ static int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream,
struct pxa2xx_runtime_data *prtd = runtime->private_data;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct pxa2xx_pcm_dma_params *dma = rtd->dai->cpu_dai->dma_data;
- size_t totsize = params_buffer_bytes(params);
- size_t period = params_period_bytes(params);
- pxa_dma_desc *dma_desc;
- dma_addr_t dma_buff_phys, next_desc_phys;
int ret;
/* return if this is a bufferless transfer e.g.
@@ -106,42 +52,16 @@ static int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream,
prtd->dma_ch = ret;
}
- snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
- runtime->dma_bytes = totsize;
-
- dma_desc = prtd->dma_desc_array;
- next_desc_phys = prtd->dma_desc_array_phys;
- dma_buff_phys = runtime->dma_addr;
- do {
- next_desc_phys += sizeof(pxa_dma_desc);
- dma_desc->ddadr = next_desc_phys;
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- dma_desc->dsadr = dma_buff_phys;
- dma_desc->dtadr = prtd->params->dev_addr;
- } else {
- dma_desc->dsadr = prtd->params->dev_addr;
- dma_desc->dtadr = dma_buff_phys;
- }
- if (period > totsize)
- period = totsize;
- dma_desc->dcmd = prtd->params->dcmd | period | DCMD_ENDIRQEN;
- dma_desc++;
- dma_buff_phys += period;
- } while (totsize -= period);
- dma_desc[-1].ddadr = prtd->dma_desc_array_phys;
-
- return 0;
+ return __pxa2xx_pcm_hw_params(substream, params);
}
static int pxa2xx_pcm_hw_free(struct snd_pcm_substream *substream)
{
struct pxa2xx_runtime_data *prtd = substream->runtime->private_data;
- if (prtd && prtd->params)
- *prtd->params->drcmr = 0;
+ __pxa2xx_pcm_hw_free(substream);
if (prtd->dma_ch) {
- snd_pcm_set_runtime_buffer(substream, NULL);
pxa_free_dma(prtd->dma_ch);
prtd->dma_ch = 0;
}
@@ -149,188 +69,21 @@ static int pxa2xx_pcm_hw_free(struct snd_pcm_substream *substream)
return 0;
}
-static int pxa2xx_pcm_prepare(struct snd_pcm_substream *substream)
-{
- struct pxa2xx_runtime_data *prtd = substream->runtime->private_data;
-
- DCSR(prtd->dma_ch) &= ~DCSR_RUN;
- DCSR(prtd->dma_ch) = 0;
- DCMD(prtd->dma_ch) = 0;
- *prtd->params->drcmr = prtd->dma_ch | DRCMR_MAPVLD;
-
- return 0;
-}
-
-static int pxa2xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct pxa2xx_runtime_data *prtd = substream->runtime->private_data;
- int ret = 0;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- DDADR(prtd->dma_ch) = prtd->dma_desc_array_phys;
- DCSR(prtd->dma_ch) = DCSR_RUN;
- break;
-
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- DCSR(prtd->dma_ch) &= ~DCSR_RUN;
- break;
-
- case SNDRV_PCM_TRIGGER_RESUME:
- DCSR(prtd->dma_ch) |= DCSR_RUN;
- break;
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- DDADR(prtd->dma_ch) = prtd->dma_desc_array_phys;
- DCSR(prtd->dma_ch) |= DCSR_RUN;
- break;
-
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static snd_pcm_uframes_t
-pxa2xx_pcm_pointer(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct pxa2xx_runtime_data *prtd = runtime->private_data;
-
- dma_addr_t ptr = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
- DSADR(prtd->dma_ch) : DTADR(prtd->dma_ch);
- snd_pcm_uframes_t x = bytes_to_frames(runtime, ptr - runtime->dma_addr);
-
- if (x == runtime->buffer_size)
- x = 0;
- return x;
-}
-
-static int pxa2xx_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct pxa2xx_runtime_data *prtd;
- int ret;
-
- snd_soc_set_runtime_hwparams(substream, &pxa2xx_pcm_hardware);
-
- /*
- * For mysterious reasons (and despite what the manual says)
- * playback samples are lost if the DMA count is not a multiple
- * of the DMA burst size. Let's add a rule to enforce that.
- */
- ret = snd_pcm_hw_constraint_step(runtime, 0,
- SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 32);
- if (ret)
- goto out;
-
- ret = snd_pcm_hw_constraint_step(runtime, 0,
- SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 32);
- if (ret)
- goto out;
-
- ret = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
- if (ret < 0)
- goto out;
-
- prtd = kzalloc(sizeof(struct pxa2xx_runtime_data), GFP_KERNEL);
- if (prtd == NULL) {
- ret = -ENOMEM;
- goto out;
- }
-
- prtd->dma_desc_array =
- dma_alloc_writecombine(substream->pcm->card->dev, PAGE_SIZE,
- &prtd->dma_desc_array_phys, GFP_KERNEL);
- if (!prtd->dma_desc_array) {
- ret = -ENOMEM;
- goto err1;
- }
-
- runtime->private_data = prtd;
- return 0;
-
- err1:
- kfree(prtd);
- out:
- return ret;
-}
-
-static int pxa2xx_pcm_close(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct pxa2xx_runtime_data *prtd = runtime->private_data;
-
- dma_free_writecombine(substream->pcm->card->dev, PAGE_SIZE,
- prtd->dma_desc_array, prtd->dma_desc_array_phys);
- kfree(prtd);
- return 0;
-}
-
-static int pxa2xx_pcm_mmap(struct snd_pcm_substream *substream,
- struct vm_area_struct *vma)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- return dma_mmap_writecombine(substream->pcm->card->dev, vma,
- runtime->dma_area,
- runtime->dma_addr,
- runtime->dma_bytes);
-}
-
struct snd_pcm_ops pxa2xx_pcm_ops = {
- .open = pxa2xx_pcm_open,
- .close = pxa2xx_pcm_close,
+ .open = __pxa2xx_pcm_open,
+ .close = __pxa2xx_pcm_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = pxa2xx_pcm_hw_params,
.hw_free = pxa2xx_pcm_hw_free,
- .prepare = pxa2xx_pcm_prepare,
+ .prepare = __pxa2xx_pcm_prepare,
.trigger = pxa2xx_pcm_trigger,
.pointer = pxa2xx_pcm_pointer,
.mmap = pxa2xx_pcm_mmap,
};
-static int pxa2xx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
-{
- struct snd_pcm_substream *substream = pcm->streams[stream].substream;
- struct snd_dma_buffer *buf = &substream->dma_buffer;
- size_t size = pxa2xx_pcm_hardware.buffer_bytes_max;
- buf->dev.type = SNDRV_DMA_TYPE_DEV;
- buf->dev.dev = pcm->card->dev;
- buf->private_data = NULL;
- buf->area = dma_alloc_writecombine(pcm->card->dev, size,
- &buf->addr, GFP_KERNEL);
- if (!buf->area)
- return -ENOMEM;
- buf->bytes = size;
- return 0;
-}
-
-static void pxa2xx_pcm_free_dma_buffers(struct snd_pcm *pcm)
-{
- struct snd_pcm_substream *substream;
- struct snd_dma_buffer *buf;
- int stream;
-
- for (stream = 0; stream < 2; stream++) {
- substream = pcm->streams[stream].substream;
- if (!substream)
- continue;
-
- buf = &substream->dma_buffer;
- if (!buf->area)
- continue;
-
- dma_free_writecombine(pcm->card->dev, buf->bytes,
- buf->area, buf->addr);
- buf->area = NULL;
- }
-}
-
static u64 pxa2xx_pcm_dmamask = DMA_32BIT_MASK;
-int pxa2xx_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
+static int pxa2xx_soc_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
struct snd_pcm *pcm)
{
int ret = 0;
@@ -360,7 +113,7 @@ int pxa2xx_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
struct snd_soc_platform pxa2xx_soc_platform = {
.name = "pxa2xx-audio",
.pcm_ops = &pxa2xx_pcm_ops,
- .pcm_new = pxa2xx_pcm_new,
+ .pcm_new = pxa2xx_soc_pcm_new,
.pcm_free = pxa2xx_pcm_free_dma_buffers,
};
EXPORT_SYMBOL_GPL(pxa2xx_soc_platform);
diff --git a/sound/soc/pxa/pxa2xx-pcm.h b/sound/soc/pxa/pxa2xx-pcm.h
index 54c9c755e50..60c3b20aeeb 100644
--- a/sound/soc/pxa/pxa2xx-pcm.h
+++ b/sound/soc/pxa/pxa2xx-pcm.h
@@ -13,21 +13,6 @@
#ifndef _PXA2XX_PCM_H
#define _PXA2XX_PCM_H
-struct pxa2xx_pcm_dma_params {
- char *name; /* stream identifier */
- u32 dcmd; /* DMA descriptor dcmd field */
- volatile u32 *drcmr; /* the DMA request channel to use */
- u32 dev_addr; /* device physical address for DMA */
-};
-
-struct pxa2xx_gpio {
- u32 sys;
- u32 rx;
- u32 tx;
- u32 clk;
- u32 frm;
-};
-
/* platform data */
extern struct snd_soc_platform pxa2xx_soc_platform;
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 37cb768fc93..9a70b00fc30 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -19,16 +19,15 @@
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <asm/hardware/scoop.h>
#include <mach/pxa-regs.h>
#include <mach/hardware.h>
-#include <mach/akita.h>
#include <mach/spitz.h>
#include "../codecs/wm8750.h"
#include "pxa2xx-pcm.h"
@@ -63,8 +62,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_enable_pin(codec, "Headphone Jack");
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 1);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 1);
break;
case SPITZ_MIC:
/* enable mic jack and bias, mute hp */
@@ -72,8 +71,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_disable_pin(codec, "Headset Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_enable_pin(codec, "Mic Jack");
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
break;
case SPITZ_LINE:
/* enable line jack, disable mic bias and mute hp */
@@ -81,8 +80,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_disable_pin(codec, "Headset Jack");
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_enable_pin(codec, "Line Jack");
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
break;
case SPITZ_HEADSET:
/* enable and unmute headset jack enable mic bias, mute L hp */
@@ -90,8 +89,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_enable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_enable_pin(codec, "Headset Jack");
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 1);
break;
case SPITZ_HP_OFF:
@@ -100,8 +99,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_disable_pin(codec, "Headset Jack");
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
break;
}
snd_soc_dapm_sync(codec);
@@ -215,23 +214,14 @@ static int spitz_set_spk(struct snd_kcontrol *kcontrol,
static int spitz_mic_bias(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
- if (machine_is_borzoi() || machine_is_spitz()) {
- if (SND_SOC_DAPM_EVENT_ON(event))
- set_scoop_gpio(&spitzscoop2_device.dev,
- SPITZ_SCP2_MIC_BIAS);
- else
- reset_scoop_gpio(&spitzscoop2_device.dev,
- SPITZ_SCP2_MIC_BIAS);
- }
+ if (machine_is_borzoi() || machine_is_spitz())
+ gpio_set_value(SPITZ_GPIO_MIC_BIAS,
+ SND_SOC_DAPM_EVENT_ON(event));
+
+ if (machine_is_akita())
+ gpio_set_value(AKITA_GPIO_MIC_BIAS,
+ SND_SOC_DAPM_EVENT_ON(event));
- if (machine_is_akita()) {
- if (SND_SOC_DAPM_EVENT_ON(event))
- akita_set_ioexp(&akitaioexp_device.dev,
- AKITA_IOEXP_MIC_BIAS);
- else
- akita_reset_ioexp(&akitaioexp_device.dev,
- AKITA_IOEXP_MIC_BIAS);
- }
return 0;
}
@@ -337,6 +327,7 @@ static struct snd_soc_machine snd_soc_machine_spitz = {
/* spitz audio private data */
static struct wm8750_setup_data spitz_wm8750_setup = {
+ .i2c_bus = 0,
.i2c_address = 0x1b,
};