diff options
Diffstat (limited to 'sound/usb')
-rw-r--r-- | sound/usb/6fire/Makefile | 3 | ||||
-rw-r--r-- | sound/usb/6fire/chip.c | 232 | ||||
-rw-r--r-- | sound/usb/6fire/chip.h | 32 | ||||
-rw-r--r-- | sound/usb/6fire/comm.c | 176 | ||||
-rw-r--r-- | sound/usb/6fire/comm.h | 44 | ||||
-rw-r--r-- | sound/usb/6fire/common.h | 30 | ||||
-rw-r--r-- | sound/usb/6fire/control.c | 275 | ||||
-rw-r--r-- | sound/usb/6fire/control.h | 37 | ||||
-rw-r--r-- | sound/usb/6fire/firmware.c | 426 | ||||
-rw-r--r-- | sound/usb/6fire/firmware.h | 27 | ||||
-rw-r--r-- | sound/usb/6fire/midi.c | 203 | ||||
-rw-r--r-- | sound/usb/6fire/midi.h | 46 | ||||
-rw-r--r-- | sound/usb/6fire/pcm.c | 688 | ||||
-rw-r--r-- | sound/usb/6fire/pcm.h | 76 | ||||
-rw-r--r-- | sound/usb/Kconfig | 17 | ||||
-rw-r--r-- | sound/usb/Makefile | 2 | ||||
-rw-r--r-- | sound/usb/caiaq/audio.c | 1 | ||||
-rw-r--r-- | sound/usb/caiaq/device.c | 6 | ||||
-rw-r--r-- | sound/usb/caiaq/device.h | 1 | ||||
-rw-r--r-- | sound/usb/card.c | 64 | ||||
-rw-r--r-- | sound/usb/midi.c | 8 | ||||
-rw-r--r-- | sound/usb/mixer.c | 65 | ||||
-rw-r--r-- | sound/usb/mixer.h | 2 | ||||
-rw-r--r-- | sound/usb/mixer_quirks.c | 174 | ||||
-rw-r--r-- | sound/usb/pcm.c | 20 | ||||
-rw-r--r-- | sound/usb/power.h | 17 | ||||
-rw-r--r-- | sound/usb/quirks-table.h | 14 | ||||
-rw-r--r-- | sound/usb/quirks.c | 56 | ||||
-rw-r--r-- | sound/usb/usbaudio.h | 6 |
29 files changed, 2704 insertions, 44 deletions
diff --git a/sound/usb/6fire/Makefile b/sound/usb/6fire/Makefile new file mode 100644 index 00000000000..dfce6ec5351 --- /dev/null +++ b/sound/usb/6fire/Makefile @@ -0,0 +1,3 @@ +snd-usb-6fire-objs += chip.o comm.o midi.o control.o firmware.o pcm.o +obj-$(CONFIG_SND_USB_6FIRE) += snd-usb-6fire.o + diff --git a/sound/usb/6fire/chip.c b/sound/usb/6fire/chip.c new file mode 100644 index 00000000000..c7dca7b0b9f --- /dev/null +++ b/sound/usb/6fire/chip.c @@ -0,0 +1,232 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Main routines and module definitions. + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "chip.h" +#include "firmware.h" +#include "pcm.h" +#include "control.h" +#include "comm.h" +#include "midi.h" + +#include <linux/moduleparam.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/gfp.h> +#include <sound/initval.h> + +MODULE_AUTHOR("Torsten Schenk <torsten.schenk@zoho.com>"); +MODULE_DESCRIPTION("TerraTec DMX 6Fire USB audio driver, version 0.3.0"); +MODULE_LICENSE("GPL v2"); +MODULE_SUPPORTED_DEVICE("{{TerraTec, DMX 6Fire USB}}"); + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */ +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for card */ +static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable card */ +static struct sfire_chip *chips[SNDRV_CARDS] = SNDRV_DEFAULT_PTR; +static struct usb_device *devices[SNDRV_CARDS] = SNDRV_DEFAULT_PTR; + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for the 6fire sound device"); +module_param_array(id, charp, NULL, 0444); +MODULE_PARM_DESC(id, "ID string for the 6fire sound device."); +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(enable, "Enable the 6fire sound device."); + +static DEFINE_MUTEX(register_mutex); + +static void usb6fire_chip_abort(struct sfire_chip *chip) +{ + if (chip) { + if (chip->pcm) + usb6fire_pcm_abort(chip); + if (chip->midi) + usb6fire_midi_abort(chip); + if (chip->comm) + usb6fire_comm_abort(chip); + if (chip->control) + usb6fire_control_abort(chip); + if (chip->card) { + snd_card_disconnect(chip->card); + snd_card_free_when_closed(chip->card); + chip->card = NULL; + } + } +} + +static void usb6fire_chip_destroy(struct sfire_chip *chip) +{ + if (chip) { + if (chip->pcm) + usb6fire_pcm_destroy(chip); + if (chip->midi) + usb6fire_midi_destroy(chip); + if (chip->comm) + usb6fire_comm_destroy(chip); + if (chip->control) + usb6fire_control_destroy(chip); + if (chip->card) + snd_card_free(chip->card); + } +} + +static int __devinit usb6fire_chip_probe(struct usb_interface *intf, + const struct usb_device_id *usb_id) +{ + int ret; + int i; + struct sfire_chip *chip = NULL; + struct usb_device *device = interface_to_usbdev(intf); + int regidx = -1; /* index in module parameter array */ + struct snd_card *card = NULL; + + /* look if we already serve this card and return if so */ + mutex_lock(®ister_mutex); + for (i = 0; i < SNDRV_CARDS; i++) { + if (devices[i] == device) { + if (chips[i]) + chips[i]->intf_count++; + usb_set_intfdata(intf, chips[i]); + mutex_unlock(®ister_mutex); + return 0; + } else if (regidx < 0) + regidx = i; + } + if (regidx < 0) { + mutex_unlock(®ister_mutex); + snd_printk(KERN_ERR PREFIX "too many cards registered.\n"); + return -ENODEV; + } + devices[regidx] = device; + mutex_unlock(®ister_mutex); + + /* check, if firmware is present on device, upload it if not */ + ret = usb6fire_fw_init(intf); + if (ret < 0) + return ret; + else if (ret == FW_NOT_READY) /* firmware update performed */ + return 0; + + /* if we are here, card can be registered in alsa. */ + if (usb_set_interface(device, 0, 0) != 0) { + snd_printk(KERN_ERR PREFIX "can't set first interface.\n"); + return -EIO; + } + ret = snd_card_create(index[regidx], id[regidx], THIS_MODULE, + sizeof(struct sfire_chip), &card); + if (ret < 0) { + snd_printk(KERN_ERR PREFIX "cannot create alsa card.\n"); + return ret; + } + strcpy(card->driver, "6FireUSB"); + strcpy(card->shortname, "TerraTec DMX6FireUSB"); + sprintf(card->longname, "%s at %d:%d", card->shortname, + device->bus->busnum, device->devnum); + snd_card_set_dev(card, &intf->dev); + + chip = card->private_data; + chips[regidx] = chip; + chip->dev = device; + chip->regidx = regidx; + chip->intf_count = 1; + chip->card = card; + + ret = usb6fire_comm_init(chip); + if (ret < 0) { + usb6fire_chip_destroy(chip); + return ret; + } + + ret = usb6fire_midi_init(chip); + if (ret < 0) { + usb6fire_chip_destroy(chip); + return ret; + } + + ret = usb6fire_pcm_init(chip); + if (ret < 0) { + usb6fire_chip_destroy(chip); + return ret; + } + + ret = usb6fire_control_init(chip); + if (ret < 0) { + usb6fire_chip_destroy(chip); + return ret; + } + + ret = snd_card_register(card); + if (ret < 0) { + snd_printk(KERN_ERR PREFIX "cannot register card."); + usb6fire_chip_destroy(chip); + return ret; + } + usb_set_intfdata(intf, chip); + return 0; +} + +static void usb6fire_chip_disconnect(struct usb_interface *intf) +{ + struct sfire_chip *chip; + struct snd_card *card; + + chip = usb_get_intfdata(intf); + if (chip) { /* if !chip, fw upload has been performed */ + card = chip->card; + chip->intf_count--; + if (!chip->intf_count) { + mutex_lock(®ister_mutex); + devices[chip->regidx] = NULL; + chips[chip->regidx] = NULL; + mutex_unlock(®ister_mutex); + + chip->shutdown = true; + usb6fire_chip_abort(chip); + usb6fire_chip_destroy(chip); + } + } +} + +static struct usb_device_id device_table[] = { + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x0ccd, + .idProduct = 0x0080 + }, + {} +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +static struct usb_driver driver = { + .name = "snd-usb-6fire", + .probe = usb6fire_chip_probe, + .disconnect = usb6fire_chip_disconnect, + .id_table = device_table, +}; + +static int __init usb6fire_chip_init(void) +{ + return usb_register(&driver); +} + +static void __exit usb6fire_chip_cleanup(void) +{ + usb_deregister(&driver); +} + +module_init(usb6fire_chip_init); +module_exit(usb6fire_chip_cleanup); diff --git a/sound/usb/6fire/chip.h b/sound/usb/6fire/chip.h new file mode 100644 index 00000000000..d11e5cb520f --- /dev/null +++ b/sound/usb/6fire/chip.h @@ -0,0 +1,32 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef USB6FIRE_CHIP_H +#define USB6FIRE_CHIP_H + +#include "common.h" + +struct sfire_chip { + struct usb_device *dev; + struct snd_card *card; + int intf_count; /* number of registered interfaces */ + int regidx; /* index in module parameter arrays */ + bool shutdown; + + struct midi_runtime *midi; + struct pcm_runtime *pcm; + struct control_runtime *control; + struct comm_runtime *comm; +}; +#endif /* USB6FIRE_CHIP_H */ + diff --git a/sound/usb/6fire/comm.c b/sound/usb/6fire/comm.c new file mode 100644 index 00000000000..c994daa57af --- /dev/null +++ b/sound/usb/6fire/comm.c @@ -0,0 +1,176 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Device communications + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "comm.h" +#include "chip.h" +#include "midi.h" + +enum { + COMM_EP = 1, + COMM_FPGA_EP = 2 +}; + +static void usb6fire_comm_init_urb(struct comm_runtime *rt, struct urb *urb, + u8 *buffer, void *context, void(*handler)(struct urb *urb)) +{ + usb_init_urb(urb); + urb->transfer_buffer = buffer; + urb->pipe = usb_sndintpipe(rt->chip->dev, COMM_EP); + urb->complete = handler; + urb->context = context; + urb->interval = 1; + urb->dev = rt->chip->dev; +} + +static void usb6fire_comm_receiver_handler(struct urb *urb) +{ + struct comm_runtime *rt = urb->context; + struct midi_runtime *midi_rt = rt->chip->midi; + + if (!urb->status) { + if (rt->receiver_buffer[0] == 0x10) /* midi in event */ + if (midi_rt) + midi_rt->in_received(midi_rt, + rt->receiver_buffer + 2, + rt->receiver_buffer[1]); + } + + if (!rt->chip->shutdown) { + urb->status = 0; + urb->actual_length = 0; + if (usb_submit_urb(urb, GFP_ATOMIC) < 0) + snd_printk(KERN_WARNING PREFIX + "comm data receiver aborted.\n"); + } +} + +static void usb6fire_comm_init_buffer(u8 *buffer, u8 id, u8 request, + u8 reg, u8 vl, u8 vh) +{ + buffer[0] = 0x01; + buffer[2] = request; + buffer[3] = id; + switch (request) { + case 0x02: + buffer[1] = 0x05; /* length (starting at buffer[2]) */ + buffer[4] = reg; + buffer[5] = vl; + buffer[6] = vh; + break; + + case 0x12: + buffer[1] = 0x0b; /* length (starting at buffer[2]) */ + buffer[4] = 0x00; + buffer[5] = 0x18; + buffer[6] = 0x05; + buffer[7] = 0x00; + buffer[8] = 0x01; + buffer[9] = 0x00; + buffer[10] = 0x9e; + buffer[11] = reg; + buffer[12] = vl; + break; + + case 0x20: + case 0x21: + case 0x22: + buffer[1] = 0x04; + buffer[4] = reg; + buffer[5] = vl; + break; + } +} + +static int usb6fire_comm_send_buffer(u8 *buffer, struct usb_device *dev) +{ + int ret; + int actual_len; + + ret = usb_interrupt_msg(dev, usb_sndintpipe(dev, COMM_EP), + buffer, buffer[1] + 2, &actual_len, HZ); + if (ret < 0) + return ret; + else if (actual_len != buffer[1] + 2) + return -EIO; + return 0; +} + +static int usb6fire_comm_write8(struct comm_runtime *rt, u8 request, + u8 reg, u8 value) +{ + u8 buffer[13]; /* 13: maximum length of message */ + + usb6fire_comm_init_buffer(buffer, 0x00, request, reg, value, 0x00); + return usb6fire_comm_send_buffer(buffer, rt->chip->dev); +} + +static int usb6fire_comm_write16(struct comm_runtime *rt, u8 request, + u8 reg, u8 vl, u8 vh) +{ + u8 buffer[13]; /* 13: maximum length of message */ + + usb6fire_comm_init_buffer(buffer, 0x00, request, reg, vl, vh); + return usb6fire_comm_send_buffer(buffer, rt->chip->dev); +} + +int __devinit usb6fire_comm_init(struct sfire_chip *chip) +{ + struct comm_runtime *rt = kzalloc(sizeof(struct comm_runtime), + GFP_KERNEL); + struct urb *urb = &rt->receiver; + int ret; + + if (!rt) + return -ENOMEM; + + rt->serial = 1; + rt->chip = chip; + usb_init_urb(urb); + rt->init_urb = usb6fire_comm_init_urb; + rt->write8 = usb6fire_comm_write8; + rt->write16 = usb6fire_comm_write16; + + /* submit an urb that receives communication data from device */ + urb->transfer_buffer = rt->receiver_buffer; + urb->transfer_buffer_length = COMM_RECEIVER_BUFSIZE; + urb->pipe = usb_rcvintpipe(chip->dev, COMM_EP); + urb->dev = chip->dev; + urb->complete = usb6fire_comm_receiver_handler; + urb->context = rt; + urb->interval = 1; + ret = usb_submit_urb(urb, GFP_KERNEL); + if (ret < 0) { + kfree(rt); + snd_printk(KERN_ERR PREFIX "cannot create comm data receiver."); + return ret; + } + chip->comm = rt; + return 0; +} + +void usb6fire_comm_abort(struct sfire_chip *chip) +{ + struct comm_runtime *rt = chip->comm; + + if (rt) + usb_poison_urb(&rt->receiver); +} + +void usb6fire_comm_destroy(struct sfire_chip *chip) +{ + kfree(chip->comm); + chip->comm = NULL; +} diff --git a/sound/usb/6fire/comm.h b/sound/usb/6fire/comm.h new file mode 100644 index 00000000000..edc5dc84b88 --- /dev/null +++ b/sound/usb/6fire/comm.h @@ -0,0 +1,44 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef USB6FIRE_COMM_H +#define USB6FIRE_COMM_H + +#include "common.h" + +enum /* settings for comm */ +{ + COMM_RECEIVER_BUFSIZE = 64, +}; + +struct comm_runtime { + struct sfire_chip *chip; + + struct urb receiver; + u8 receiver_buffer[COMM_RECEIVER_BUFSIZE]; + + u8 serial; /* urb serial */ + + void (*init_urb)(struct comm_runtime *rt, struct urb *urb, u8 *buffer, + void *context, void(*handler)(struct urb *urb)); + /* writes control data to the device */ + int (*write8)(struct comm_runtime *rt, u8 request, u8 reg, u8 value); + int (*write16)(struct comm_runtime *rt, u8 request, u8 reg, + u8 vh, u8 vl); +}; + +int __devinit usb6fire_comm_init(struct sfire_chip *chip); +void usb6fire_comm_abort(struct sfire_chip *chip); +void usb6fire_comm_destroy(struct sfire_chip *chip); +#endif /* USB6FIRE_COMM_H */ + diff --git a/sound/usb/6fire/common.h b/sound/usb/6fire/common.h new file mode 100644 index 00000000000..7dbeb4a3783 --- /dev/null +++ b/sound/usb/6fire/common.h @@ -0,0 +1,30 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef USB6FIRE_COMMON_H +#define USB6FIRE_COMMON_H + +#include <linux/slab.h> +#include <linux/usb.h> +#include <sound/core.h> + +#define PREFIX "6fire: " + +struct sfire_chip; +struct midi_runtime; +struct pcm_runtime; +struct control_runtime; +struct comm_runtime; +#endif /* USB6FIRE_COMMON_H */ + diff --git a/sound/usb/6fire/control.c b/sound/usb/6fire/control.c new file mode 100644 index 00000000000..24846351118 --- /dev/null +++ b/sound/usb/6fire/control.c @@ -0,0 +1,275 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Mixer control + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/interrupt.h> +#include <sound/control.h> + +#include "control.h" +#include "comm.h" +#include "chip.h" + +static char *opt_coax_texts[2] = { "Optical", "Coax" }; +static char *line_phono_texts[2] = { "Line", "Phono" }; + +/* + * calculated with $value\[i\] = 128 \cdot sqrt[3]{\frac{i}{128}}$ + * this is done because the linear values cause rapid degredation + * of volume in the uppermost region. + */ +static const u8 log_volume_table[128] = { + 0x00, 0x19, 0x20, 0x24, 0x28, 0x2b, 0x2e, 0x30, 0x32, 0x34, + 0x36, 0x38, 0x3a, 0x3b, 0x3d, 0x3e, 0x40, 0x41, 0x42, 0x43, + 0x44, 0x46, 0x47, 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, + 0x4e, 0x4f, 0x50, 0x51, 0x52, 0x53, 0x53, 0x54, 0x55, 0x56, + 0x56, 0x57, 0x58, 0x58, 0x59, 0x5a, 0x5b, 0x5b, 0x5c, 0x5c, + 0x5d, 0x5e, 0x5e, 0x5f, 0x60, 0x60, 0x61, 0x61, 0x62, 0x62, + 0x63, 0x63, 0x64, 0x65, 0x65, 0x66, 0x66, 0x67, 0x67, 0x68, + 0x68, 0x69, 0x69, 0x6a, 0x6a, 0x6b, 0x6b, 0x6c, 0x6c, 0x6c, + 0x6d, 0x6d, 0x6e, 0x6e, 0x6f, 0x6f, 0x70, 0x70, 0x70, 0x71, + 0x71, 0x72, 0x72, 0x73, 0x73, 0x73, 0x74, 0x74, 0x75, 0x75, + 0x75, 0x76, 0x76, 0x77, 0x77, 0x77, 0x78, 0x78, 0x78, 0x79, + 0x79, 0x7a, 0x7a, 0x7a, 0x7b, 0x7b, 0x7b, 0x7c, 0x7c, 0x7c, + 0x7d, 0x7d, 0x7d, 0x7e, 0x7e, 0x7e, 0x7f, 0x7f }; + +/* + * data that needs to be sent to device. sets up card internal stuff. + * values dumped from windows driver and filtered by trial'n'error. + */ +static const struct { + u8 type; + u8 reg; + u8 value; +} +init_data[] = { + { 0x22, 0x00, 0x00 }, { 0x20, 0x00, 0x08 }, { 0x22, 0x01, 0x01 }, + { 0x20, 0x01, 0x08 }, { 0x22, 0x02, 0x00 }, { 0x20, 0x02, 0x08 }, + { 0x22, 0x03, 0x00 }, { 0x20, 0x03, 0x08 }, { 0x22, 0x04, 0x00 }, + { 0x20, 0x04, 0x08 }, { 0x22, 0x05, 0x01 }, { 0x20, 0x05, 0x08 }, + { 0x22, 0x04, 0x01 }, { 0x12, 0x04, 0x00 }, { 0x12, 0x05, 0x00 }, + { 0x12, 0x0d, 0x78 }, { 0x12, 0x21, 0x82 }, { 0x12, 0x22, 0x80 }, + { 0x12, 0x23, 0x00 }, { 0x12, 0x06, 0x02 }, { 0x12, 0x03, 0x00 }, + { 0x12, 0x02, 0x00 }, { 0x22, 0x03, 0x01 }, + { 0 } /* TERMINATING ENTRY */ +}; + +static void usb6fire_control_master_vol_update(struct control_runtime *rt) +{ + struct comm_runtime *comm_rt = rt->chip->comm; + if (comm_rt) { + /* set volume */ + comm_rt->write8(comm_rt, 0x12, 0x0f, 0x7f - + log_volume_table[rt->master_vol]); + /* unmute */ + comm_rt->write8(comm_rt, 0x12, 0x0e, 0x00); + } +} + +static void usb6fire_control_line_phono_update(struct control_runtime *rt) +{ + struct comm_runtime *comm_rt = rt->chip->comm; + if (comm_rt) { + comm_rt->write8(comm_rt, 0x22, 0x02, rt->line_phono_switch); + comm_rt->write8(comm_rt, 0x21, 0x02, rt->line_phono_switch); + } +} + +static void usb6fire_control_opt_coax_update(struct control_runtime *rt) +{ + struct comm_runtime *comm_rt = rt->chip->comm; + if (comm_rt) { + comm_rt->write8(comm_rt, 0x22, 0x00, rt->opt_coax_switch); + comm_rt->write8(comm_rt, 0x21, 0x00, rt->opt_coax_switch); + } +} + +static int usb6fire_control_master_vol_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 127; + return 0; +} + +static int usb6fire_control_master_vol_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + int changed = 0; + if (rt->master_vol != ucontrol->value.integer.value[0]) { + rt->master_vol = ucontrol->value.integer.value[0]; + usb6fire_control_master_vol_update(rt); + changed = 1; + } + return changed; +} + +static int usb6fire_control_master_vol_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + ucontrol->value.integer.value[0] = rt->master_vol; + return 0; +} + +static int usb6fire_control_line_phono_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = 2; + if (uinfo->value.enumerated.item > 1) + uinfo->value.enumerated.item = 1; + strcpy(uinfo->value.enumerated.name, + line_phono_texts[uinfo->value.enumerated.item]); + return 0; +} + +static int usb6fire_control_line_phono_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + int changed = 0; + if (rt->line_phono_switch != ucontrol->value.integer.value[0]) { + rt->line_phono_switch = ucontrol->value.integer.value[0]; + usb6fire_control_line_phono_update(rt); + changed = 1; + } + return changed; +} + +static int usb6fire_control_line_phono_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + ucontrol->value.integer.value[0] = rt->line_phono_switch; + return 0; +} + +static int usb6fire_control_opt_coax_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = 2; + if (uinfo->value.enumerated.item > 1) + uinfo->value.enumerated.item = 1; + strcpy(uinfo->value.enumerated.name, + opt_coax_texts[uinfo->value.enumerated.item]); + return 0; +} + +static int usb6fire_control_opt_coax_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + int changed = 0; + + if (rt->opt_coax_switch != ucontrol->value.enumerated.item[0]) { + rt->opt_coax_switch = ucontrol->value.enumerated.item[0]; + usb6fire_control_opt_coax_update(rt); + changed = 1; + } + return changed; +} + +static int usb6fire_control_opt_coax_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + ucontrol->value.enumerated.item[0] = rt->opt_coax_switch; + return 0; +} + +static struct __devinitdata snd_kcontrol_new elements[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Master Playback Volume", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = usb6fire_control_master_vol_info, + .get = usb6fire_control_master_vol_get, + .put = usb6fire_control_master_vol_put + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Line/Phono Capture Route", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = usb6fire_control_line_phono_info, + .get = usb6fire_control_line_phono_get, + .put = usb6fire_control_line_phono_put + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Opt/Coax Capture Route", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = usb6fire_control_opt_coax_info, + .get = usb6fire_control_opt_coax_get, + .put = usb6fire_control_opt_coax_put + }, + {} +}; + +int __devinit usb6fire_control_init(struct sfire_chip *chip) +{ + int i; + int ret; + struct control_runtime *rt = kzalloc(sizeof(struct control_runtime), + GFP_KERNEL); + struct comm_runtime *comm_rt = chip->comm; + + if (!rt) + return -ENOMEM; + + rt->chip = chip; + + i = 0; + while (init_data[i].type) { + comm_rt->write8(comm_rt, init_data[i].type, init_data[i].reg, + init_data[i].value); + i++; + } + + usb6fire_control_opt_coax_update(rt); + usb6fire_control_line_phono_update(rt); + usb6fire_control_master_vol_update(rt); + + i = 0; + while (elements[i].name) { + ret = snd_ctl_add(chip->card, snd_ctl_new1(&elements[i], rt)); + if (ret < 0) { + kfree(rt); + snd_printk(KERN_ERR PREFIX "cannot add control.\n"); + return ret; + } + i++; + } + + chip->control = rt; + return 0; +} + +void usb6fire_control_abort(struct sfire_chip *chip) +{} + +void usb6fire_control_destroy(struct sfire_chip *chip) +{ + kfree(chip->control); + chip->control = NULL; +} diff --git a/sound/usb/6fire/control.h b/sound/usb/6fire/control.h new file mode 100644 index 00000000000..b534c777ab0 --- /dev/null +++ b/sound/usb/6fire/control.h @@ -0,0 +1,37 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef USB6FIRE_CONTROL_H +#define USB6FIRE_CONTROL_H + +#include "common.h" + +enum { + CONTROL_MAX_ELEMENTS = 32 +}; + +struct control_runtime { + struct sfire_chip *chip; + + struct snd_kcontrol *element[CONTROL_MAX_ELEMENTS]; + bool opt_coax_switch; + bool line_phono_switch; + u8 master_vol; +}; + +int __devinit usb6fire_control_init(struct sfire_chip *chip); +void usb6fire_control_abort(struct sfire_chip *chip); +void usb6fire_control_destroy(struct sfire_chip *chip); +#endif /* USB6FIRE_CONTROL_H */ + diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c new file mode 100644 index 00000000000..9081a54a9c6 --- /dev/null +++ b/sound/usb/6fire/firmware.c @@ -0,0 +1,426 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Firmware loader + * + * Currently not working for all devices. To be able to use the device + * in linux, it is also possible to let the windows driver upload the firmware. + * For that, start the computer in windows and reboot. + * As long as the device is connected to the power supply, no firmware reload + * needs to be performed. + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/firmware.h> + +#include "firmware.h" +#include "chip.h" + +MODULE_FIRMWARE("6fire/dmx6firel2.ihx"); +MODULE_FIRMWARE("6fire/dmx6fireap.ihx"); +MODULE_FIRMWARE("6fire/dmx6firecf.bin"); + +enum { + FPGA_BUFSIZE = 512, FPGA_EP = 2 +}; + +static const u8 BIT_REVERSE_TABLE[256] = { + 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, 0x10, 0x90, 0x50, + 0xd0, 0x30, 0xb0, 0x70, 0xf0, 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, + 0x68, 0xe8, 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8, 0x04, + 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4, 0x14, 0x94, 0x54, 0xd4, + 0x34, 0xb4, 0x74, 0xf4, 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, + 0xec, 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc, 0x02, 0x82, + 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2, 0x12, 0x92, 0x52, 0xd2, 0x32, + 0xb2, 0x72, 0xf2, 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea, + 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa, 0x06, 0x86, 0x46, + 0xc6, 0x26, 0xa6, 0x66, 0xe6, 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, + 0x76, 0xf6, 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee, 0x1e, + 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe, 0x01, 0x81, 0x41, 0xc1, + 0x21, 0xa1, 0x61, 0xe1, 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, + 0xf1, 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9, 0x19, 0x99, + 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9, 0x05, 0x85, 0x45, 0xc5, 0x25, + 0xa5, 0x65, 0xe5, 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5, + 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed, 0x1d, 0x9d, 0x5d, + 0xdd, 0x3d, 0xbd, 0x7d, 0xfd, 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, + 0x63, 0xe3, 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3, 0x0b, + 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb, 0x1b, 0x9b, 0x5b, 0xdb, + 0x3b, 0xbb, 0x7b, 0xfb, 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, + 0xe7, 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7, 0x0f, 0x8f, + 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef, 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, + 0xbf, 0x7f, 0xff }; + +/* + * wMaxPacketSize of pcm endpoints. + * keep synced with rates_in_packet_size and rates_out_packet_size in pcm.c + * fpp: frames per isopacket + * + * CAUTION: keep sizeof <= buffer[] in usb6fire_fw_init + */ +static const u8 ep_w_max_packet_size[] = { + 0xe4, 0x00, 0xe4, 0x00, /* alt 1: 228 EP2 and EP6 (7 fpp) */ + 0xa4, 0x01, 0xa4, 0x01, /* alt 2: 420 EP2 and EP6 (13 fpp)*/ + 0x94, 0x01, 0x5c, 0x02 /* alt 3: 404 EP2 and 604 EP6 (25 fpp) */ +}; + +struct ihex_record { + u16 address; + u8 len; + u8 data[256]; + char error; /* true if an error occured parsing this record */ + + u8 max_len; /* maximum record length in whole ihex */ + + /* private */ + const char *txt_data; + unsigned int txt_length; + unsigned int txt_offset; /* current position in txt_data */ +}; + +static u8 usb6fire_fw_ihex_nibble(const u8 n) +{ + if (n >= '0' && n <= '9') + return n - '0'; + else if (n >= 'A' && n <= 'F') + return n - ('A' - 10); + else if (n >= 'a' && n <= 'f') + return n - ('a' - 10); + return 0; +} + +static u8 usb6fire_fw_ihex_hex(const u8 *data, u8 *crc) +{ + u8 val = (usb6fire_fw_ihex_nibble(data[0]) << 4) | + usb6fire_fw_ihex_nibble(data[1]); + *crc += val; + return val; +} + +/* + * returns true if record is available, false otherwise. + * iff an error occured, false will be returned and record->error will be true. + */ +static bool usb6fire_fw_ihex_next_record(struct ihex_record *record) +{ + u8 crc = 0; + u8 type; + int i; + + record->error = false; + + /* find begin of record (marked by a colon) */ + while (record->txt_offset < record->txt_length + && record->txt_data[record->txt_offset] != ':') + record->txt_offset++; + if (record->txt_offset == record->txt_length) + return false; + + /* number of characters needed for len, addr and type entries */ + record->txt_offset++; + if (record->txt_offset + 8 > record->txt_length) { + record->error = true; + return false; + } + + record->len = usb6fire_fw_ihex_hex(record->txt_data + + record->txt_offset, &crc); + record->txt_offset += 2; + record->address = usb6fire_fw_ihex_hex(record->txt_data + + record->txt_offset, &crc) << 8; + record->txt_offset += 2; + record->address |= usb6fire_fw_ihex_hex(record->txt_data + + record->txt_offset, &crc); + record->txt_offset += 2; + type = usb6fire_fw_ihex_hex(record->txt_data + + record->txt_offset, &crc); + record->txt_offset += 2; + + /* number of characters needed for data and crc entries */ + if (record->txt_offset + 2 * (record->len + 1) > record->txt_length) { + record->error = true; + return false; + } + for (i = 0; i < record->len; i++) { + record->data[i] = usb6fire_fw_ihex_hex(record->txt_data + + record->txt_offset, &crc); + record->txt_offset += 2; + } + usb6fire_fw_ihex_hex(record->txt_data + record->txt_offset, &crc); + if (crc) { + record->error = true; + return false; + } + + if (type == 1 || !record->len) /* eof */ + return false; + else if (type == 0) + return true; + else { + record->error = true; + return false; + } +} + +static int usb6fire_fw_ihex_init(const struct firmware *fw, + struct ihex_record *record) +{ + record->txt_data = fw->data; + record->txt_length = fw->size; + record->txt_offset = 0; + record->max_len = 0; + /* read all records, if loop ends, record->error indicates, + * whether ihex is valid. */ + while (usb6fire_fw_ihex_next_record(record)) + record->max_len = max(record->len, record->max_len); + if (record->error) + return -EINVAL; + record->txt_offset = 0; + return 0; +} + +static int usb6fire_fw_ezusb_write(struct usb_device *device, + int type, int value, char *data, int len) +{ + int ret; + + ret = usb_control_msg(device, usb_sndctrlpipe(device, 0), type, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, 0, data, len, HZ); + if (ret < 0) + return ret; + else if (ret != len) + return -EIO; + return 0; +} + +static int usb6fire_fw_ezusb_read(struct usb_device *device, + int type, int value, char *data, int len) +{ + int ret = usb_control_msg(device, usb_rcvctrlpipe(device, 0), type, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, + 0, data, len, HZ); + if (ret < 0) + return ret; + else if (ret != len) + return -EIO; + return 0; +} + +static int usb6fire_fw_fpga_write(struct usb_device *device, + char *data, int len) +{ + int actual_len; + int ret; + + ret = usb_bulk_msg(device, usb_sndbulkpipe(device, FPGA_EP), data, len, + &actual_len, HZ); + if (ret < 0) + return ret; + else if (actual_len != len) + return -EIO; + return 0; +} + +static int usb6fire_fw_ezusb_upload( + struct usb_interface *intf, const char *fwname, + unsigned int postaddr, u8 *postdata, unsigned int postlen) +{ + int ret; + u8 data; + struct usb_device *device = interface_to_usbdev(intf); + const struct firmware *fw = 0; + struct ihex_record *rec = kmalloc(sizeof(struct ihex_record), + GFP_KERNEL); + + if (!rec) + return -ENOMEM; + + ret = request_firmware(&fw, fwname, &device->dev); + if (ret < 0) { + kfree(rec); + snd_printk(KERN_ERR PREFIX "error requesting ezusb " + "firmware %s.\n", fwname); + return ret; + } + ret = usb6fire_fw_ihex_init(fw, rec); + if (ret < 0) { + kfree(rec); + snd_printk(KERN_ERR PREFIX "error validating ezusb " + "firmware %s.\n", fwname); + return ret; + } + /* upload firmware image */ + data = 0x01; /* stop ezusb cpu */ + ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1); + if (ret < 0) { + kfree(rec); + release_firmware(fw); + snd_printk(KERN_ERR PREFIX "unable to upload ezusb " + "firmware %s: begin message.\n", fwname); + return ret; + } + + while (usb6fire_fw_ihex_next_record(rec)) { /* write firmware */ + ret = usb6fire_fw_ezusb_write(device, 0xa0, rec->address, + rec->data, rec->len); + if (ret < 0) { + kfree(rec); + release_firmware(fw); + snd_printk(KERN_ERR PREFIX "unable to upload ezusb " + "firmware %s: data urb.\n", fwname); + return ret; + } + } + + release_firmware(fw); + kfree(rec); + if (postdata) { /* write data after firmware has been uploaded */ + ret = usb6fire_fw_ezusb_write(device, 0xa0, postaddr, + postdata, postlen); + if (ret < 0) { + snd_printk(KERN_ERR PREFIX "unable to upload ezusb " + "firmware %s: post urb.\n", fwname); + return ret; + } + } + + data = 0x00; /* resume ezusb cpu */ + ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1); + if (ret < 0) { + release_firmware(fw); + snd_printk(KERN_ERR PREFIX "unable to upload ezusb " + "firmware %s: end message.\n", fwname); + return ret; + } + return 0; +} + +static int usb6fire_fw_fpga_upload( + struct usb_interface *intf, const char *fwname) +{ + int ret; + int i; + struct usb_device *device = interface_to_usbdev(intf); + u8 *buffer = kmalloc(FPGA_BUFSIZE, GFP_KERNEL); + const char *c; + const char *end; + const struct firmware *fw; + + if (!buffer) + return -ENOMEM; + + ret = request_firmware(&fw, fwname, &device->dev); + if (ret < 0) { + snd_printk(KERN_ERR PREFIX "unable to get fpga firmware %s.\n", + fwname); + kfree(buffer); + return -EIO; + } + + c = fw->data; + end = fw->data + fw->size; + + ret = usb6fire_fw_ezusb_write(device, 8, 0, NULL, 0); + if (ret < 0) { + kfree(buffer); + release_firmware(fw); + snd_printk(KERN_ERR PREFIX "unable to upload fpga firmware: " + "begin urb.\n"); + return ret; + } + + while (c != end) { + for (i = 0; c != end && i < FPGA_BUFSIZE; i++, c++) + buffer[i] = BIT_REVERSE_TABLE[(u8) *c]; + + ret = usb6fire_fw_fpga_write(device, buffer, i); + if (ret < 0) { + release_firmware(fw); + kfree(buffer); + snd_printk(KERN_ERR PREFIX "unable to upload fpga " + "firmware: fw urb.\n"); + return ret; + } + } + release_firmware(fw); + kfree(buffer); + + ret = usb6fire_fw_ezusb_write(device, 9, 0, NULL, 0); + if (ret < 0) { + snd_printk(KERN_ERR PREFIX "unable to upload fpga firmware: " + "end urb.\n"); + return ret; + } + return 0; +} + +int usb6fire_fw_init(struct usb_interface *intf) +{ + int i; + int ret; + struct usb_device *device = interface_to_usbdev(intf); + /* buffer: 8 receiving bytes from device and + * sizeof(EP_W_MAX_PACKET_SIZE) bytes for non-const copy */ + u8 buffer[12]; + + ret = usb6fire_fw_ezusb_read(device, 1, 0, buffer, 8); + if (ret < 0) { + snd_printk(KERN_ERR PREFIX "unable to receive device " + "firmware state.\n"); + return ret; + } + if (buffer[0] != 0xeb || buffer[1] != 0xaa || buffer[2] != 0x55 + || buffer[4] != 0x03 || buffer[5] != 0x01 || buffer[7] + != 0x00) { + snd_printk(KERN_ERR PREFIX "unknown device firmware state " + "received from device: "); + for (i = 0; i < 8; i++) + snd_printk("%02x ", buffer[i]); + snd_printk("\n"); + return -EIO; + } + /* do we need fpga loader ezusb firmware? */ + if (buffer[3] == 0x01 && buffer[6] == 0x19) { + ret = usb6fire_fw_ezusb_upload(intf, + "6fire/dmx6firel2.ihx", 0, NULL, 0); + if (ret < 0) + return ret; + return FW_NOT_READY; + } + /* do we need fpga firmware and application ezusb firmware? */ + else if (buffer[3] == 0x02 && buffer[6] == 0x0b) { + ret = usb6fire_fw_fpga_upload(intf, "6fire/dmx6firecf.bin"); + if (ret < 0) + return ret; + memcpy(buffer, ep_w_max_packet_size, + sizeof(ep_w_max_packet_size)); + ret = usb6fire_fw_ezusb_upload(intf, "6fire/dmx6fireap.ihx", + 0x0003, buffer, sizeof(ep_w_max_packet_size)); + if (ret < 0) + return ret; + return FW_NOT_READY; + } + /* all fw loaded? */ + else if (buffer[3] == 0x03 && buffer[6] == 0x0b) + return 0; + /* unknown data? */ + else { + snd_printk(KERN_ERR PREFIX "unknown device firmware state " + "received from device: "); + for (i = 0; i < 8; i++) + snd_printk("%02x ", buffer[i]); + snd_printk("\n"); + return -EIO; + } + return 0; +} + diff --git a/sound/usb/6fire/firmware.h b/sound/usb/6fire/firmware.h new file mode 100644 index 00000000000..00856989538 --- /dev/null +++ b/sound/usb/6fire/firmware.h @@ -0,0 +1,27 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Author: Torsten Schenk + * Created: Jan 01, 2011 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef USB6FIRE_FIRMWARE_H +#define USB6FIRE_FIRMWARE_H + +#include "common.h" + +enum /* firmware state of device */ +{ + FW_READY = 0, + FW_NOT_READY = 1 +}; + +int __devinit usb6fire_fw_init(struct usb_interface *intf); +#endif /* USB6FIRE_FIRMWARE_H */ + diff --git a/sound/usb/6fire/midi.c b/sound/usb/6fire/midi.c new file mode 100644 index 00000000000..13f4509dce2 --- /dev/null +++ b/sound/usb/6fire/midi.c @@ -0,0 +1,203 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Rawmidi driver + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <sound/rawmidi.h> + +#include "midi.h" +#include "chip.h" +#include "comm.h" + +static void usb6fire_midi_out_handler(struct urb *urb) +{ + struct midi_runtime *rt = urb->context; + int ret; + unsigned long flags; + + spin_lock_irqsave(&rt->out_lock, flags); + + if (rt->out) { + ret = snd_rawmidi_transmit(rt->out, rt->out_buffer + 4, + MIDI_BUFSIZE - 4); + if (ret > 0) { /* more data available, send next packet */ + rt->out_buffer[1] = ret + 2; + rt->out_buffer[3] = rt->out_serial++; + urb->transfer_buffer_length = ret + 4; + + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret < 0) + snd_printk(KERN_ERR PREFIX "midi out urb " + "submit failed: %d\n", ret); + } else /* no more data to transmit */ + rt->out = NULL; + } + spin_unlock_irqrestore(&rt->out_lock, flags); +} + +static void usb6fire_midi_in_received( + struct midi_runtime *rt, u8 *data, int length) +{ + unsigned long flags; + + spin_lock_irqsave(&rt->in_lock, flags); + if (rt->in) + snd_rawmidi_receive(rt->in, data, length); + spin_unlock_irqrestore(&rt->in_lock, flags); +} + +static int usb6fire_midi_out_open(struct snd_rawmidi_substream *alsa_sub) +{ + return 0; +} + +static int usb6fire_midi_out_close(struct snd_rawmidi_substream *alsa_sub) +{ + return 0; +} + +static void usb6fire_midi_out_trigger( + struct snd_rawmidi_substream *alsa_sub, int up) +{ + struct midi_runtime *rt = alsa_sub->rmidi->private_data; + struct urb *urb = &rt->out_urb; + __s8 ret; + unsigned long flags; + + spin_lock_irqsave(&rt->out_lock, flags); + if (up) { /* start transfer */ + if (rt->out) { /* we are already transmitting so just return */ + spin_unlock_irqrestore(&rt->out_lock, flags); + return; + } + + ret = snd_rawmidi_transmit(alsa_sub, rt->out_buffer + 4, + MIDI_BUFSIZE - 4); + if (ret > 0) { + rt->out_buffer[1] = ret + 2; + rt->out_buffer[3] = rt->out_serial++; + urb->transfer_buffer_length = ret + 4; + + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret < 0) + snd_printk(KERN_ERR PREFIX "midi out urb " + "submit failed: %d\n", ret); + else + rt->out = alsa_sub; + } + } else if (rt->out == alsa_sub) + rt->out = NULL; + spin_unlock_irqrestore(&rt->out_lock, flags); +} + +static void usb6fire_midi_out_drain(struct snd_rawmidi_substream *alsa_sub) +{ + struct midi_runtime *rt = alsa_sub->rmidi->private_data; + int retry = 0; + + while (rt->out && retry++ < 100) + msleep(10); +} + +static int usb6fire_midi_in_open(struct snd_rawmidi_substream *alsa_sub) +{ + return 0; +} + +static int usb6fire_midi_in_close(struct snd_rawmidi_substream *alsa_sub) +{ + return 0; +} + +static void usb6fire_midi_in_trigger( + struct snd_rawmidi_substream *alsa_sub, int up) +{ + struct midi_runtime *rt = alsa_sub->rmidi->private_data; + unsigned long flags; + + spin_lock_irqsave(&rt->in_lock, flags); + if (up) + rt->in = alsa_sub; + else + rt->in = NULL; + spin_unlock_irqrestore(&rt->in_lock, flags); +} + +static struct snd_rawmidi_ops out_ops = { + .open = usb6fire_midi_out_open, + .close = usb6fire_midi_out_close, + .trigger = usb6fire_midi_out_trigger, + .drain = usb6fire_midi_out_drain +}; + +static struct snd_rawmidi_ops in_ops = { + .open = usb6fire_midi_in_open, + .close = usb6fire_midi_in_close, + .trigger = usb6fire_midi_in_trigger +}; + +int __devinit usb6fire_midi_init(struct sfire_chip *chip) +{ + int ret; + struct midi_runtime *rt = kzalloc(sizeof(struct midi_runtime), + GFP_KERNEL); + struct comm_runtime *comm_rt = chip->comm; + + if (!rt) + return -ENOMEM; + + rt->chip = chip; + rt->in_received = usb6fire_midi_in_received; + rt->out_buffer[0] = 0x80; /* 'send midi' command */ + rt->out_buffer[1] = 0x00; /* size of data */ + rt->out_buffer[2] = 0x00; /* always 0 */ + spin_lock_init(&rt->in_lock); + spin_lock_init(&rt->out_lock); + + comm_rt->init_urb(comm_rt, &rt->out_urb, rt->out_buffer, rt, + usb6fire_midi_out_handler); + + ret = snd_rawmidi_new(chip->card, "6FireUSB", 0, 1, 1, &rt->instance); + if (ret < 0) { + kfree(rt); + snd_printk(KERN_ERR PREFIX "unable to create midi.\n"); + return ret; + } + rt->instance->private_data = rt; + strcpy(rt->instance->name, "DMX6FireUSB MIDI"); + rt->instance->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT | + SNDRV_RAWMIDI_INFO_INPUT | + SNDRV_RAWMIDI_INFO_DUPLEX; + snd_rawmidi_set_ops(rt->instance, SNDRV_RAWMIDI_STREAM_OUTPUT, + &out_ops); + snd_rawmidi_set_ops(rt->instance, SNDRV_RAWMIDI_STREAM_INPUT, + &in_ops); + + chip->midi = rt; + return 0; +} + +void usb6fire_midi_abort(struct sfire_chip *chip) +{ + struct midi_runtime *rt = chip->midi; + + if (rt) + usb_poison_urb(&rt->out_urb); +} + +void usb6fire_midi_destroy(struct sfire_chip *chip) +{ + kfree(chip->midi); + chip->midi = NULL; +} diff --git a/sound/usb/6fire/midi.h b/sound/usb/6fire/midi.h new file mode 100644 index 00000000000..97a7bf66913 --- /dev/null +++ b/sound/usb/6fire/midi.h @@ -0,0 +1,46 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef USB6FIRE_MIDI_H +#define USB6FIRE_MIDI_H + +#include "common.h" + +enum { + MIDI_BUFSIZE = 64 +}; + +struct midi_runtime { + struct sfire_chip *chip; + struct snd_rawmidi *instance; + + struct snd_rawmidi_substream *in; + char in_active; + + spinlock_t in_lock; + spinlock_t out_lock; + struct snd_rawmidi_substream *out; + struct urb out_urb; + u8 out_serial; /* serial number of out packet */ + u8 out_buffer[MIDI_BUFSIZE]; + int buffer_offset; + + void (*in_received)(struct midi_runtime *rt, u8 *data, int length); +}; + +int __devinit usb6fire_midi_init(struct sfire_chip *chip); +void usb6fire_midi_abort(struct sfire_chip *chip); +void usb6fire_midi_destroy(struct sfire_chip *chip); +#endif /* USB6FIRE_MIDI_H */ + diff --git a/sound/usb/6fire/pcm.c b/sound/usb/6fire/pcm.c new file mode 100644 index 00000000000..ba62c7468ba --- /dev/null +++ b/sound/usb/6fire/pcm.c @@ -0,0 +1,688 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * PCM driver + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "pcm.h" +#include "chip.h" +#include "comm.h" + +enum { + OUT_N_CHANNELS = 6, IN_N_CHANNELS = 4 +}; + +/* keep next two synced with + * FW_EP_W_MAX_PACKET_SIZE[] and RATES_MAX_PACKET_SIZE */ +static const int rates_in_packet_size[] = { 228, 228, 420, 420, 404, 404 }; +static const int rates_out_packet_size[] = { 228, 228, 420, 420, 604, 604 }; +static const int rates[] = { 44100, 48000, 88200, 96000, 176400, 192000 }; +static const int rates_altsetting[] = { 1, 1, 2, 2, 3, 3 }; +static const int rates_alsaid[] = { + SNDRV_PCM_RATE_44100, SNDRV_PCM_RATE_48000, + SNDRV_PCM_RATE_88200, SNDRV_PCM_RATE_96000, + SNDRV_PCM_RATE_176400, SNDRV_PCM_RATE_192000 }; + +/* values to write to soundcard register for all samplerates */ +static const u16 rates_6fire_vl[] = {0x00, 0x01, 0x00, 0x01, 0x00, 0x01}; +static const u16 rates_6fire_vh[] = {0x11, 0x11, 0x10, 0x10, 0x00, 0x00}; + +enum { /* settings for pcm */ + OUT_EP = 6, IN_EP = 2, MAX_BUFSIZE = 128 * 1024 +}; + +enum { /* pcm streaming states */ + STREAM_DISABLED, /* no pcm streaming */ + STREAM_STARTING, /* pcm streaming requested, waiting to become ready */ + STREAM_RUNNING, /* pcm streaming running */ + STREAM_STOPPING +}; + +enum { /* pcm sample rates (also index into RATES_XXX[]) */ + RATE_44KHZ, + RATE_48KHZ, + RATE_88KHZ, + RATE_96KHZ, + RATE_176KHZ, + RATE_192KHZ +}; + +static const struct snd_pcm_hardware pcm_hw = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, + + .formats = SNDRV_PCM_FMTBIT_S24_LE, + + .rates = SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_176400 | + SNDRV_PCM_RATE_192000, + + .rate_min = 44100, + .rate_max = 192000, + .channels_min = 1, + .channels_max = 0, /* set in pcm_open, depending on capture/playback */ + .buffer_bytes_max = MAX_BUFSIZE, + .period_bytes_min = PCM_N_PACKETS_PER_URB * (PCM_MAX_PACKET_SIZE - 4), + .period_bytes_max = MAX_BUFSIZE, + .periods_min = 2, + .periods_max = 1024 +}; + +static int usb6fire_pcm_set_rate(struct pcm_runtime *rt) +{ + int ret; + struct usb_device *device = rt->chip->dev; + struct comm_runtime *comm_rt = rt->chip->comm; + + if (rt->rate >= ARRAY_SIZE(rates)) + return -EINVAL; + /* disable streaming */ + ret = comm_rt->write16(comm_rt, 0x02, 0x00, 0x00, 0x00); + if (ret < 0) { + snd_printk(KERN_ERR PREFIX "error stopping streaming while " + "setting samplerate %d.\n", rates[rt->rate]); + return ret; + } + + ret = usb_set_interface(device, 1, rates_altsetting[rt->rate]); + if (ret < 0) { + snd_printk(KERN_ERR PREFIX "error setting interface " + "altsetting %d for samplerate %d.\n", + rates_altsetting[rt->rate], rates[rt->rate]); + return ret; + } + + /* set soundcard clock */ + ret = comm_rt->write16(comm_rt, 0x02, 0x01, rates_6fire_vl[rt->rate], + rates_6fire_vh[rt->rate]); + if (ret < 0) { + snd_printk(KERN_ERR PREFIX "error setting samplerate %d.\n", + rates[rt->rate]); + return ret; + } + + /* enable analog inputs and outputs + * (one bit per stereo-channel) */ + ret = comm_rt->write16(comm_rt, 0x02, 0x02, + (1 << (OUT_N_CHANNELS / 2)) - 1, + (1 << (IN_N_CHANNELS / 2)) - 1); + if (ret < 0) { + snd_printk(KERN_ERR PREFIX "error initializing analog channels " + "while setting samplerate %d.\n", + rates[rt->rate]); + return ret; + } + /* disable digital inputs and outputs */ + ret = comm_rt->write16(comm_rt, 0x02, 0x03, 0x00, 0x00); + if (ret < 0) { + snd_printk(KERN_ERR PREFIX "error initializing digital " + "channels while setting samplerate %d.\n", + rates[rt->rate]); + return ret; + } + + ret = comm_rt->write16(comm_rt, 0x02, 0x00, 0x00, 0x01); + if (ret < 0) { + snd_printk(KERN_ERR PREFIX "error starting streaming while " + "setting samplerate %d.\n", rates[rt->rate]); + return ret; + } + + rt->in_n_analog = IN_N_CHANNELS; + rt->out_n_analog = OUT_N_CHANNELS; + rt->in_packet_size = rates_in_packet_size[rt->rate]; + rt->out_packet_size = rates_out_packet_size[rt->rate]; + return 0; +} + +static struct pcm_substream *usb6fire_pcm_get_substream( + struct snd_pcm_substream *alsa_sub) +{ + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + + if (alsa_sub->stream == SNDRV_PCM_STREAM_PLAYBACK) + return &rt->playback; + else if (alsa_sub->stream == SNDRV_PCM_STREAM_CAPTURE) + return &rt->capture; + snd_printk(KERN_ERR PREFIX "error getting pcm substream slot.\n"); + return NULL; +} + +/* call with stream_mutex locked */ +static void usb6fire_pcm_stream_stop(struct pcm_runtime *rt) +{ + int i; + + if (rt->stream_state != STREAM_DISABLED) { + for (i = 0; i < PCM_N_URBS; i++) { + usb_kill_urb(&rt->in_urbs[i].instance); + usb_kill_urb(&rt->out_urbs[i].instance); + } + rt->stream_state = STREAM_DISABLED; + } +} + +/* call with stream_mutex locked */ +static int usb6fire_pcm_stream_start(struct pcm_runtime *rt) +{ + int ret; + int i; + int k; + struct usb_iso_packet_descriptor *packet; + + if (rt->stream_state == STREAM_DISABLED) { + /* submit our in urbs */ + rt->stream_wait_cond = false; + rt->stream_state = STREAM_STARTING; + for (i = 0; i < PCM_N_URBS; i++) { + for (k = 0; k < PCM_N_PACKETS_PER_URB; k++) { + packet = &rt->in_urbs[i].packets[k]; + packet->offset = k * rt->in_packet_size; + packet->length = rt->in_packet_size; + packet->actual_length = 0; + packet->status = 0; + } + ret = usb_submit_urb(&rt->in_urbs[i].instance, + GFP_ATOMIC); + if (ret) { + usb6fire_pcm_stream_stop(rt); + return ret; + } + } + + /* wait for first out urb to return (sent in in urb handler) */ + wait_event_timeout(rt->stream_wait_queue, rt->stream_wait_cond, + HZ); + if (rt->stream_wait_cond) + rt->stream_state = STREAM_RUNNING; + else { + usb6fire_pcm_stream_stop(rt); + return -EIO; + } + } + return 0; +} + +/* call with substream locked */ +static void usb6fire_pcm_capture(struct pcm_substream *sub, struct pcm_urb *urb) +{ + int i; + int frame; + int frame_count; + unsigned int total_length = 0; + struct pcm_runtime *rt = snd_pcm_substream_chip(sub->instance); + struct snd_pcm_runtime *alsa_rt = sub->instance->runtime; + u32 *src = (u32 *) urb->buffer; + u32 *dest = (u32 *) (alsa_rt->dma_area + sub->dma_off + * (alsa_rt->frame_bits >> 3)); + u32 *dest_end = (u32 *) (alsa_rt->dma_area + alsa_rt->buffer_size + * (alsa_rt->frame_bits >> 3)); + int bytes_per_frame = alsa_rt->channels << 2; + + for (i = 0; i < PCM_N_PACKETS_PER_URB; i++) { + /* at least 4 header bytes for valid packet. + * after that: 32 bits per sample for analog channels */ + if (urb->packets[i].actual_length > 4) + frame_count = (urb->packets[i].actual_length - 4) + / (rt->in_n_analog << 2); + else + frame_count = 0; + + src = (u32 *) (urb->buffer + total_length); + src++; /* skip leading 4 bytes of every packet */ + total_length += urb->packets[i].length; + for (frame = 0; frame < frame_count; frame++) { + memcpy(dest, src, bytes_per_frame); + dest += alsa_rt->channels; + src += rt->in_n_analog; + sub->dma_off++; + sub->period_off++; + if (dest == dest_end) { + sub->dma_off = 0; + dest = (u32 *) alsa_rt->dma_area; + } + } + } +} + +/* call with substream locked */ +static void usb6fire_pcm_playback(struct pcm_substream *sub, + struct pcm_urb *urb) +{ + int i; + int frame; + int frame_count; + struct pcm_runtime *rt = snd_pcm_substream_chip(sub->instance); + struct snd_pcm_runtime *alsa_rt = sub->instance->runtime; + u32 *src = (u32 *) (alsa_rt->dma_area + sub->dma_off + * (alsa_rt->frame_bits >> 3)); + u32 *src_end = (u32 *) (alsa_rt->dma_area + alsa_rt->buffer_size + * (alsa_rt->frame_bits >> 3)); + u32 *dest = (u32 *) urb->buffer; + int bytes_per_frame = alsa_rt->channels << 2; + + for (i = 0; i < PCM_N_PACKETS_PER_URB; i++) { + /* at least 4 header bytes for valid packet. + * after that: 32 bits per sample for analog channels */ + if (urb->packets[i].length > 4) + frame_count = (urb->packets[i].length - 4) + / (rt->out_n_analog << 2); + else + frame_count = 0; + dest++; /* skip leading 4 bytes of every frame */ + for (frame = 0; frame < frame_count; frame++) { + memcpy(dest, src, bytes_per_frame); + src += alsa_rt->channels; + dest += rt->out_n_analog; + sub->dma_off++; + sub->period_off++; + if (src == src_end) { + src = (u32 *) alsa_rt->dma_area; + sub->dma_off = 0; + } + } + } +} + +static void usb6fire_pcm_in_urb_handler(struct urb *usb_urb) +{ + struct pcm_urb *in_urb = usb_urb->context; + struct pcm_urb *out_urb = in_urb->peer; + struct pcm_runtime *rt = in_urb->chip->pcm; + struct pcm_substream *sub; + unsigned long flags; + int total_length = 0; + int frame_count; + int frame; + int channel; + int i; + u8 *dest; + + if (usb_urb->status || rt->panic || rt->stream_state == STREAM_STOPPING) + return; + for (i = 0; i < PCM_N_PACKETS_PER_URB; i++) + if (in_urb->packets[i].status) { + rt->panic = true; + return; + } + + if (rt->stream_state == STREAM_DISABLED) { + snd_printk(KERN_ERR PREFIX "internal error: " + "stream disabled in in-urb handler.\n"); + return; + } + + /* receive our capture data */ + sub = &rt->capture; + spin_lock_irqsave(&sub->lock, flags); + if (sub->active) { + usb6fire_pcm_capture(sub, in_urb); + if (sub->period_off >= sub->instance->runtime->period_size) { + sub->period_off %= sub->instance->runtime->period_size; + spin_unlock_irqrestore(&sub->lock, flags); + snd_pcm_period_elapsed(sub->instance); + } else + spin_unlock_irqrestore(&sub->lock, flags); + } else + spin_unlock_irqrestore(&sub->lock, flags); + + /* setup out urb structure */ + for (i = 0; i < PCM_N_PACKETS_PER_URB; i++) { + out_urb->packets[i].offset = total_length; + out_urb->packets[i].length = (in_urb->packets[i].actual_length + - 4) / (rt->in_n_analog << 2) + * (rt->out_n_analog << 2) + 4; + out_urb->packets[i].status = 0; + total_length += out_urb->packets[i].length; + } + memset(out_urb->buffer, 0, total_length); + + /* now send our playback data (if a free out urb was found) */ + sub = &rt->playback; + spin_lock_irqsave(&sub->lock, flags); + if (sub->active) { + usb6fire_pcm_playback(sub, out_urb); + if (sub->period_off >= sub->instance->runtime->period_size) { + sub->period_off %= sub->instance->runtime->period_size; + spin_unlock_irqrestore(&sub->lock, flags); + snd_pcm_period_elapsed(sub->instance); + } else + spin_unlock_irqrestore(&sub->lock, flags); + } else + spin_unlock_irqrestore(&sub->lock, flags); + + /* setup the 4th byte of each sample (0x40 for analog channels) */ + dest = out_urb->buffer; + for (i = 0; i < PCM_N_PACKETS_PER_URB; i++) + if (out_urb->packets[i].length >= 4) { + frame_count = (out_urb->packets[i].length - 4) + / (rt->out_n_analog << 2); + *(dest++) = 0xaa; + *(dest++) = 0xaa; + *(dest++) = frame_count; + *(dest++) = 0x00; + for (frame = 0; frame < frame_count; frame++) + for (channel = 0; + channel < rt->out_n_analog; + channel++) { + dest += 3; /* skip sample data */ + *(dest++) = 0x40; + } + } + usb_submit_urb(&out_urb->instance, GFP_ATOMIC); + usb_submit_urb(&in_urb->instance, GFP_ATOMIC); +} + +static void usb6fire_pcm_out_urb_handler(struct urb *usb_urb) +{ + struct pcm_urb *urb = usb_urb->context; + struct pcm_runtime *rt = urb->chip->pcm; + + if (rt->stream_state == STREAM_STARTING) { + rt->stream_wait_cond = true; + wake_up(&rt->stream_wait_queue); + } +} + +static int usb6fire_pcm_open(struct snd_pcm_substream *alsa_sub) +{ + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + struct pcm_substream *sub = NULL; + struct snd_pcm_runtime *alsa_rt = alsa_sub->runtime; + + if (rt->panic) + return -EPIPE; + + mutex_lock(&rt->stream_mutex); + alsa_rt->hw = pcm_hw; + + if (alsa_sub->stream == SNDRV_PCM_STREAM_PLAYBACK) { + if (rt->rate >= 0) + alsa_rt->hw.rates = rates_alsaid[rt->rate]; + alsa_rt->hw.channels_max = OUT_N_CHANNELS; + sub = &rt->playback; + } else if (alsa_sub->stream == SNDRV_PCM_STREAM_CAPTURE) { + if (rt->rate >= 0) + alsa_rt->hw.rates = rates_alsaid[rt->rate]; + alsa_rt->hw.channels_max = IN_N_CHANNELS; + sub = &rt->capture; + } + + if (!sub) { + mutex_unlock(&rt->stream_mutex); + snd_printk(KERN_ERR PREFIX "invalid stream type.\n"); + return -EINVAL; + } + + sub->instance = alsa_sub; + sub->active = false; + mutex_unlock(&rt->stream_mutex); + return 0; +} + +static int usb6fire_pcm_close(struct snd_pcm_substream *alsa_sub) +{ + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + struct pcm_substream *sub = usb6fire_pcm_get_substream(alsa_sub); + unsigned long flags; + + if (rt->panic) + return 0; + + mutex_lock(&rt->stream_mutex); + if (sub) { + /* deactivate substream */ + spin_lock_irqsave(&sub->lock, flags); + sub->instance = NULL; + sub->active = false; + spin_unlock_irqrestore(&sub->lock, flags); + + /* all substreams closed? if so, stop streaming */ + if (!rt->playback.instance && !rt->capture.instance) { + usb6fire_pcm_stream_stop(rt); + rt->rate = -1; + } + } + mutex_unlock(&rt->stream_mutex); + return 0; +} + +static int usb6fire_pcm_hw_params(struct snd_pcm_substream *alsa_sub, + struct snd_pcm_hw_params *hw_params) +{ + return snd_pcm_lib_malloc_pages(alsa_sub, + params_buffer_bytes(hw_params)); +} + +static int usb6fire_pcm_hw_free(struct snd_pcm_substream *alsa_sub) +{ + return snd_pcm_lib_free_pages(alsa_sub); +} + +static int usb6fire_pcm_prepare(struct snd_pcm_substream *alsa_sub) +{ + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + struct pcm_substream *sub = usb6fire_pcm_get_substream(alsa_sub); + struct snd_pcm_runtime *alsa_rt = alsa_sub->runtime; + int i; + int ret; + + if (rt->panic) + return -EPIPE; + if (!sub) + return -ENODEV; + + mutex_lock(&rt->stream_mutex); + sub->dma_off = 0; + sub->period_off = 0; + + if (rt->stream_state == STREAM_DISABLED) { + for (i = 0; i < ARRAY_SIZE(rates); i++) + if (alsa_rt->rate == rates[i]) { + rt->rate = i; + break; + } + if (i == ARRAY_SIZE(rates)) { + mutex_unlock(&rt->stream_mutex); + snd_printk("invalid rate %d in prepare.\n", + alsa_rt->rate); + return -EINVAL; + } + + ret = usb6fire_pcm_set_rate(rt); + if (ret) { + mutex_unlock(&rt->stream_mutex); + return ret; + } + ret = usb6fire_pcm_stream_start(rt); + if (ret) { + mutex_unlock(&rt->stream_mutex); + snd_printk(KERN_ERR PREFIX + "could not start pcm stream.\n"); + return ret; + } + } + mutex_unlock(&rt->stream_mutex); + return 0; +} + +static int usb6fire_pcm_trigger(struct snd_pcm_substream *alsa_sub, int cmd) +{ + struct pcm_substream *sub = usb6fire_pcm_get_substream(alsa_sub); + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + unsigned long flags; + + if (rt->panic) + return -EPIPE; + if (!sub) + return -ENODEV; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + spin_lock_irqsave(&sub->lock, flags); + sub->active = true; + spin_unlock_irqrestore(&sub->lock, flags); + return 0; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + spin_lock_irqsave(&sub->lock, flags); + sub->active = false; + spin_unlock_irqrestore(&sub->lock, flags); + return 0; + + default: + return -EINVAL; + } +} + +static snd_pcm_uframes_t usb6fire_pcm_pointer( + struct snd_pcm_substream *alsa_sub) +{ + struct pcm_substream *sub = usb6fire_pcm_get_substream(alsa_sub); + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + unsigned long flags; + snd_pcm_uframes_t ret; + + if (rt->panic || !sub) + return SNDRV_PCM_STATE_XRUN; + + spin_lock_irqsave(&sub->lock, flags); + ret = sub->dma_off; + spin_unlock_irqrestore(&sub->lock, flags); + return ret; +} + +static struct snd_pcm_ops pcm_ops = { + .open = usb6fire_pcm_open, + .close = usb6fire_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = usb6fire_pcm_hw_params, + .hw_free = usb6fire_pcm_hw_free, + .prepare = usb6fire_pcm_prepare, + .trigger = usb6fire_pcm_trigger, + .pointer = usb6fire_pcm_pointer, +}; + +static void __devinit usb6fire_pcm_init_urb(struct pcm_urb *urb, + struct sfire_chip *chip, bool in, int ep, + void (*handler)(struct urb *)) +{ + urb->chip = chip; + usb_init_urb(&urb->instance); + urb->instance.transfer_buffer = urb->buffer; + urb->instance.transfer_buffer_length = + PCM_N_PACKETS_PER_URB * PCM_MAX_PACKET_SIZE; + urb->instance.dev = chip->dev; + urb->instance.pipe = in ? usb_rcvisocpipe(chip->dev, ep) + : usb_sndisocpipe(chip->dev, ep); + urb->instance.interval = 1; + urb->instance.transfer_flags = URB_ISO_ASAP; + urb->instance.complete = handler; + urb->instance.context = urb; + urb->instance.number_of_packets = PCM_N_PACKETS_PER_URB; +} + +int __devinit usb6fire_pcm_init(struct sfire_chip *chip) +{ + int i; + int ret; + struct snd_pcm *pcm; + struct pcm_runtime *rt = + kzalloc(sizeof(struct pcm_runtime), GFP_KERNEL); + + if (!rt) + return -ENOMEM; + + rt->chip = chip; + rt->stream_state = STREAM_DISABLED; + rt->rate = -1; + init_waitqueue_head(&rt->stream_wait_queue); + mutex_init(&rt->stream_mutex); + + spin_lock_init(&rt->playback.lock); + spin_lock_init(&rt->capture.lock); + + for (i = 0; i < PCM_N_URBS; i++) { + usb6fire_pcm_init_urb(&rt->in_urbs[i], chip, true, IN_EP, + usb6fire_pcm_in_urb_handler); + usb6fire_pcm_init_urb(&rt->out_urbs[i], chip, false, OUT_EP, + usb6fire_pcm_out_urb_handler); + + rt->in_urbs[i].peer = &rt->out_urbs[i]; + rt->out_urbs[i].peer = &rt->in_urbs[i]; + } + + ret = snd_pcm_new(chip->card, "DMX6FireUSB", 0, 1, 1, &pcm); + if (ret < 0) { + kfree(rt); + snd_printk(KERN_ERR PREFIX "cannot create pcm instance.\n"); + return ret; + } + + pcm->private_data = rt; + strcpy(pcm->name, "DMX 6Fire USB"); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &pcm_ops); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &pcm_ops); + + ret = snd_pcm_lib_preallocate_pages_for_all(pcm, + SNDRV_DMA_TYPE_CONTINUOUS, + snd_dma_continuous_data(GFP_KERNEL), + MAX_BUFSIZE, MAX_BUFSIZE); + if (ret) { + kfree(rt); + snd_printk(KERN_ERR PREFIX + "error preallocating pcm buffers.\n"); + return ret; + } + rt->instance = pcm; + + chip->pcm = rt; + return 0; +} + +void usb6fire_pcm_abort(struct sfire_chip *chip) +{ + struct pcm_runtime *rt = chip->pcm; + int i; + + if (rt) { + rt->panic = true; + + if (rt->playback.instance) + snd_pcm_stop(rt->playback.instance, + SNDRV_PCM_STATE_XRUN); + if (rt->capture.instance) + snd_pcm_stop(rt->capture.instance, + SNDRV_PCM_STATE_XRUN); + + for (i = 0; i < PCM_N_URBS; i++) { + usb_poison_urb(&rt->in_urbs[i].instance); + usb_poison_urb(&rt->out_urbs[i].instance); + } + + } +} + +void usb6fire_pcm_destroy(struct sfire_chip *chip) +{ + kfree(chip->pcm); + chip->pcm = NULL; +} diff --git a/sound/usb/6fire/pcm.h b/sound/usb/6fire/pcm.h new file mode 100644 index 00000000000..2bee8137400 --- /dev/null +++ b/sound/usb/6fire/pcm.h @@ -0,0 +1,76 @@ +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Author: Torsten Schenk <torsten.schenk@zoho.com> + * Created: Jan 01, 2011 + * Version: 0.3.0 + * Copyright: (C) Torsten Schenk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef USB6FIRE_PCM_H +#define USB6FIRE_PCM_H + +#include <sound/pcm.h> +#include <linux/mutex.h> + +#include "common.h" + +enum /* settings for pcm */ +{ + /* maximum of EP_W_MAX_PACKET_SIZE[] (see firmware.c) */ + PCM_N_URBS = 16, PCM_N_PACKETS_PER_URB = 8, PCM_MAX_PACKET_SIZE = 604 +}; + +struct pcm_urb { + struct sfire_chip *chip; + + /* BEGIN DO NOT SEPARATE */ + struct urb instance; + struct usb_iso_packet_descriptor packets[PCM_N_PACKETS_PER_URB]; + /* END DO NOT SEPARATE */ + u8 buffer[PCM_N_PACKETS_PER_URB * PCM_MAX_PACKET_SIZE]; + + struct pcm_urb *peer; +}; + +struct pcm_substream { + spinlock_t lock; + struct snd_pcm_substream *instance; + + bool active; + + snd_pcm_uframes_t dma_off; /* current position in alsa dma_area */ + snd_pcm_uframes_t period_off; /* current position in current period */ +}; + +struct pcm_runtime { + struct sfire_chip *chip; + struct snd_pcm *instance; + + struct pcm_substream playback; + struct pcm_substream capture; + bool panic; /* if set driver won't do anymore pcm on device */ + + struct pcm_urb in_urbs[PCM_N_URBS]; + struct pcm_urb out_urbs[PCM_N_URBS]; + int in_packet_size; + int out_packet_size; + int in_n_analog; /* number of analog channels soundcard sends */ + int out_n_analog; /* number of analog channels soundcard receives */ + + struct mutex stream_mutex; + u8 stream_state; /* one of STREAM_XXX (pcm.c) */ + u8 rate; /* one of PCM_RATE_XXX */ + wait_queue_head_t stream_wait_queue; + bool stream_wait_cond; +}; + +int __devinit usb6fire_pcm_init(struct sfire_chip *chip); +void usb6fire_pcm_abort(struct sfire_chip *chip); +void usb6fire_pcm_destroy(struct sfire_chip *chip); +#endif /* USB6FIRE_PCM_H */ diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig index 112984f4080..97724d8fa9f 100644 --- a/sound/usb/Kconfig +++ b/sound/usb/Kconfig @@ -62,6 +62,7 @@ config SND_USB_CAIAQ * Native Instruments Audio 2 DJ * Native Instruments Audio 4 DJ * Native Instruments Audio 8 DJ + * Native Instruments Traktor Audio 2 * Native Instruments Guitar Rig Session I/O * Native Instruments Guitar Rig mobile * Native Instruments Traktor Kontrol X1 @@ -97,5 +98,21 @@ config SND_USB_US122L To compile this driver as a module, choose M here: the module will be called snd-usb-us122l. +config SND_USB_6FIRE + tristate "TerraTec DMX 6Fire USB" + depends on EXPERIMENTAL + select FW_LOADER + select SND_RAWMIDI + select SND_PCM + help + Say Y here to include support for TerraTec 6fire DMX USB interface. + + You will need firmware files in order to be able to use the device + after it has been coldstarted. This driver currently does not support + firmware loading for all devices. If you own such a device, + you could start windows and let the windows driver upload + the firmware. As long as you do not unplug your device from power, + it should be usable. + endif # SND_USB diff --git a/sound/usb/Makefile b/sound/usb/Makefile index 1e362bf8834..cf9ed66445f 100644 --- a/sound/usb/Makefile +++ b/sound/usb/Makefile @@ -23,4 +23,4 @@ obj-$(CONFIG_SND_USB_UA101) += snd-usbmidi-lib.o obj-$(CONFIG_SND_USB_USX2Y) += snd-usbmidi-lib.o obj-$(CONFIG_SND_USB_US122L) += snd-usbmidi-lib.o -obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ +obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ 6fire/ diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c index 66eabafb1c2..d0d493ca28a 100644 --- a/sound/usb/caiaq/audio.c +++ b/sound/usb/caiaq/audio.c @@ -805,6 +805,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev) case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO2DJ): case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ): case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ): + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORAUDIO2): dev->samplerates |= SNDRV_PCM_RATE_88200; break; } diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c index 6480c3283c0..45bc4a2dc6f 100644 --- a/sound/usb/caiaq/device.c +++ b/sound/usb/caiaq/device.c @@ -46,6 +46,7 @@ MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2}," "{Native Instruments, Audio 2 DJ}," "{Native Instruments, Audio 4 DJ}," "{Native Instruments, Audio 8 DJ}," + "{Native Instruments, Traktor Audio 2}," "{Native Instruments, Session I/O}," "{Native Instruments, GuitarRig mobile}" "{Native Instruments, Traktor Kontrol X1}" @@ -140,6 +141,11 @@ static struct usb_device_id snd_usb_id_table[] = { .idVendor = USB_VID_NATIVEINSTRUMENTS, .idProduct = USB_PID_TRAKTORKONTROLS4 }, + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = USB_VID_NATIVEINSTRUMENTS, + .idProduct = USB_PID_TRAKTORAUDIO2 + }, { /* terminator */ } }; diff --git a/sound/usb/caiaq/device.h b/sound/usb/caiaq/device.h index e3d8a3efb35..b2b310194ff 100644 --- a/sound/usb/caiaq/device.h +++ b/sound/usb/caiaq/device.h @@ -17,6 +17,7 @@ #define USB_PID_GUITARRIGMOBILE 0x0d8d #define USB_PID_TRAKTORKONTROLX1 0x2305 #define USB_PID_TRAKTORKONTROLS4 0xbaff +#define USB_PID_TRAKTORAUDIO2 0x041d #define EP1_BUFSIZE 64 #define EP4_BUFSIZE 512 diff --git a/sound/usb/card.c b/sound/usb/card.c index c0f8270bc19..40722f8711a 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -65,6 +65,7 @@ #include "pcm.h" #include "urb.h" #include "format.h" +#include "power.h" MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>"); MODULE_DESCRIPTION("USB Audio"); @@ -330,6 +331,7 @@ static int snd_usb_audio_create(struct usb_device *dev, int idx, chip->setup = device_setup[idx]; chip->nrpacks = nrpacks; chip->async_unlink = async_unlink; + chip->probing = 1; chip->usb_id = USB_ID(le16_to_cpu(dev->descriptor.idVendor), le16_to_cpu(dev->descriptor.idProduct)); @@ -451,6 +453,7 @@ static void *snd_usb_audio_probe(struct usb_device *dev, goto __error; } chip = usb_chip[i]; + chip->probing = 1; break; } } @@ -466,6 +469,7 @@ static void *snd_usb_audio_probe(struct usb_device *dev, goto __error; } snd_card_set_dev(chip->card, &intf->dev); + chip->pm_intf = intf; break; } if (!chip) { @@ -505,6 +509,7 @@ static void *snd_usb_audio_probe(struct usb_device *dev, usb_chip[chip->index] = chip; chip->num_interfaces++; + chip->probing = 0; mutex_unlock(®ister_mutex); return chip; @@ -581,29 +586,61 @@ static void usb_audio_disconnect(struct usb_interface *intf) } #ifdef CONFIG_PM + +int snd_usb_autoresume(struct snd_usb_audio *chip) +{ + int err = -ENODEV; + + if (!chip->shutdown && !chip->probing) + err = usb_autopm_get_interface(chip->pm_intf); + + return err; +} + +void snd_usb_autosuspend(struct snd_usb_audio *chip) +{ + if (!chip->shutdown && !chip->probing) + usb_autopm_put_interface(chip->pm_intf); +} + static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message) { struct snd_usb_audio *chip = usb_get_intfdata(intf); struct list_head *p; struct snd_usb_stream *as; + struct usb_mixer_interface *mixer; if (chip == (void *)-1L) return 0; - snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot); - if (!chip->num_suspended_intf++) { - list_for_each(p, &chip->pcm_list) { - as = list_entry(p, struct snd_usb_stream, list); - snd_pcm_suspend_all(as->pcm); - } + if (!(message.event & PM_EVENT_AUTO)) { + snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot); + if (!chip->num_suspended_intf++) { + list_for_each(p, &chip->pcm_list) { + as = list_entry(p, struct snd_usb_stream, list); + snd_pcm_suspend_all(as->pcm); + } + } + } else { + /* + * otherwise we keep the rest of the system in the dark + * to keep this transparent + */ + if (!chip->num_suspended_intf++) + chip->autosuspended = 1; } + list_for_each_entry(mixer, &chip->mixer_list, list) + snd_usb_mixer_inactivate(mixer); + return 0; } static int usb_audio_resume(struct usb_interface *intf) { struct snd_usb_audio *chip = usb_get_intfdata(intf); + struct usb_mixer_interface *mixer; + int err = 0; if (chip == (void *)-1L) return 0; @@ -611,12 +648,20 @@ static int usb_audio_resume(struct usb_interface *intf) return 0; /* * ALSA leaves material resumption to user space - * we just notify + * we just notify and restart the mixers */ + list_for_each_entry(mixer, &chip->mixer_list, list) { + err = snd_usb_mixer_activate(mixer); + if (err < 0) + goto err_out; + } - snd_power_change_state(chip->card, SNDRV_CTL_POWER_D0); + if (!chip->autosuspended) + snd_power_change_state(chip->card, SNDRV_CTL_POWER_D0); + chip->autosuspended = 0; - return 0; +err_out: + return err; } #else #define usb_audio_suspend NULL @@ -644,6 +689,7 @@ static struct usb_driver usb_audio_driver = { .suspend = usb_audio_suspend, .resume = usb_audio_resume, .id_table = usb_audio_ids, + .supports_autosuspend = 1, }; static int __init snd_usb_audio_init(void) diff --git a/sound/usb/midi.c b/sound/usb/midi.c index db2dc5ffe6d..b4b39c0b6c9 100644 --- a/sound/usb/midi.c +++ b/sound/usb/midi.c @@ -54,6 +54,7 @@ #include <sound/asequencer.h> #include "usbaudio.h" #include "midi.h" +#include "power.h" #include "helper.h" /* @@ -1044,6 +1045,7 @@ static int snd_usbmidi_output_open(struct snd_rawmidi_substream *substream) struct snd_usb_midi* umidi = substream->rmidi->private_data; struct usbmidi_out_port* port = NULL; int i, j; + int err; for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) if (umidi->endpoints[i].out) @@ -1056,6 +1058,9 @@ static int snd_usbmidi_output_open(struct snd_rawmidi_substream *substream) snd_BUG(); return -ENXIO; } + err = usb_autopm_get_interface(umidi->iface); + if (err < 0) + return -EIO; substream->runtime->private_data = port; port->state = STATE_UNKNOWN; substream_open(substream, 1); @@ -1064,7 +1069,10 @@ static int snd_usbmidi_output_open(struct snd_rawmidi_substream *substream) static int snd_usbmidi_output_close(struct snd_rawmidi_substream *substream) { + struct snd_usb_midi* umidi = substream->rmidi->private_data; + substream_open(substream, 0); + usb_autopm_put_interface(umidi->iface); return 0; } diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 85af6051b52..5e477571660 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -61,6 +61,7 @@ #include "mixer.h" #include "helper.h" #include "mixer_quirks.h" +#include "power.h" #define MAX_ID_ELEMS 256 @@ -295,16 +296,22 @@ static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request, int v unsigned char buf[2]; int val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1; int timeout = 10; + int err; + err = snd_usb_autoresume(cval->mixer->chip); + if (err < 0) + return -EIO; while (timeout-- > 0) { if (snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), buf, val_len, 100) >= val_len) { *value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len)); + snd_usb_autosuspend(cval->mixer->chip); return 0; } } + snd_usb_autosuspend(cval->mixer->chip); snd_printdd(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n", request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type); return -EINVAL; @@ -328,12 +335,18 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v memset(buf, 0, sizeof(buf)); + ret = snd_usb_autoresume(chip) ? -EIO : 0; + if (ret) + goto error; + ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), buf, size, 1000); + snd_usb_autosuspend(chip); if (ret < 0) { +error: snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n", request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type); return ret; @@ -413,7 +426,7 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, { struct snd_usb_audio *chip = cval->mixer->chip; unsigned char buf[2]; - int val_len, timeout = 10; + int val_len, err, timeout = 10; if (cval->mixer->protocol == UAC_VERSION_1) { val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1; @@ -433,13 +446,19 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, value_set = convert_bytes_value(cval, value_set); buf[0] = value_set & 0xff; buf[1] = (value_set >> 8) & 0xff; + err = snd_usb_autoresume(chip); + if (err < 0) + return -EIO; while (timeout-- > 0) if (snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), request, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), - buf, val_len, 100) >= 0) + buf, val_len, 100) >= 0) { + snd_usb_autosuspend(chip); return 0; + } + snd_usb_autosuspend(chip); snd_printdd(KERN_ERR "cannot set ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d, data = %#x/%#x\n", request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type, buf[0], buf[1]); return -EINVAL; @@ -987,6 +1006,7 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, struct snd_kcontrol *kctl; struct usb_mixer_elem_info *cval; const struct usbmix_name_map *map; + unsigned int range; control++; /* change from zero-based to 1-based value */ @@ -1121,6 +1141,7 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, } break; + case USB_ID(0x046d, 0x0808): case USB_ID(0x046d, 0x0809): case USB_ID(0x046d, 0x0991): /* Most audio usb devices lie about volume resolution. @@ -1136,6 +1157,21 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, } + range = (cval->max - cval->min) / cval->res; + /* Are there devices with volume range more than 255? I use a bit more + * to be sure. 384 is a resolution magic number found on Logitech + * devices. It will definitively catch all buggy Logitech devices. + */ + if (range > 384) { + snd_printk(KERN_WARNING "usb_audio: Warning! Unlikely big " + "volume range (=%u), cval->res is probably wrong.", + range); + snd_printk(KERN_WARNING "usb_audio: [%d] FU [%s] ch = %d, " + "val = %d/%d/%d", cval->id, + kctl->id.name, cval->channels, + cval->min, cval->max, cval->res); + } + snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n", cval->id, kctl->id.name, cval->channels, cval->min, cval->max, cval->res); add_control_to_empty(state, kctl); @@ -2058,8 +2094,9 @@ static void snd_usb_mixer_interrupt(struct urb *urb) { struct usb_mixer_interface *mixer = urb->context; int len = urb->actual_length; + int ustatus = urb->status; - if (urb->status != 0) + if (ustatus != 0) goto requeue; if (mixer->protocol == UAC_VERSION_1) { @@ -2100,12 +2137,32 @@ static void snd_usb_mixer_interrupt(struct urb *urb) } requeue: - if (urb->status != -ENOENT && urb->status != -ECONNRESET) { + if (ustatus != -ENOENT && ustatus != -ECONNRESET && ustatus != -ESHUTDOWN) { urb->dev = mixer->chip->dev; usb_submit_urb(urb, GFP_ATOMIC); } } +/* stop any bus activity of a mixer */ +void snd_usb_mixer_inactivate(struct usb_mixer_interface *mixer) +{ + usb_kill_urb(mixer->urb); + usb_kill_urb(mixer->rc_urb); +} + +int snd_usb_mixer_activate(struct usb_mixer_interface *mixer) +{ + int err; + + if (mixer->urb) { + err = usb_submit_urb(mixer->urb, GFP_NOIO); + if (err < 0) + return err; + } + + return 0; +} + /* create the handler for the optional status interrupt endpoint */ static int snd_usb_mixer_status_create(struct usb_mixer_interface *mixer) { diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h index 26c636c5c93..b4a2c8165e4 100644 --- a/sound/usb/mixer.h +++ b/sound/usb/mixer.h @@ -52,5 +52,7 @@ void snd_usb_mixer_notify_id(struct usb_mixer_interface *mixer, int unitid); int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, int request, int validx, int value_set); +void snd_usb_mixer_inactivate(struct usb_mixer_interface *mixer); +int snd_usb_mixer_activate(struct usb_mixer_interface *mixer); #endif /* __USBMIXER_H */ diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 782f741cd00..73dcc8256bc 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -346,6 +346,141 @@ static int snd_xonar_u1_controls_create(struct usb_mixer_interface *mixer) return 0; } +/* Native Instruments device quirks */ + +#define _MAKE_NI_CONTROL(bRequest,wIndex) ((bRequest) << 16 | (wIndex)) + +static int snd_nativeinstruments_control_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol); + struct usb_device *dev = mixer->chip->dev; + u8 bRequest = (kcontrol->private_value >> 16) & 0xff; + u16 wIndex = kcontrol->private_value & 0xffff; + u8 tmp; + + int ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0, cpu_to_le16(wIndex), + &tmp, sizeof(tmp), 1000); + + if (ret < 0) { + snd_printk(KERN_ERR + "unable to issue vendor read request (ret = %d)", ret); + return ret; + } + + ucontrol->value.integer.value[0] = tmp; + + return 0; +} + +static int snd_nativeinstruments_control_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_interface *mixer = snd_kcontrol_chip(kcontrol); + struct usb_device *dev = mixer->chip->dev; + u8 bRequest = (kcontrol->private_value >> 16) & 0xff; + u16 wIndex = kcontrol->private_value & 0xffff; + u16 wValue = ucontrol->value.integer.value[0]; + + int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), bRequest, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + cpu_to_le16(wValue), cpu_to_le16(wIndex), + NULL, 0, 1000); + + if (ret < 0) { + snd_printk(KERN_ERR + "unable to issue vendor write request (ret = %d)", ret); + return ret; + } + + return 0; +} + +static struct snd_kcontrol_new snd_nativeinstruments_ta6_mixers[] = { + { + .name = "Direct Thru Channel A", + .private_value = _MAKE_NI_CONTROL(0x01, 0x03), + }, + { + .name = "Direct Thru Channel B", + .private_value = _MAKE_NI_CONTROL(0x01, 0x05), + }, + { + .name = "Phono Input Channel A", + .private_value = _MAKE_NI_CONTROL(0x02, 0x03), + }, + { + .name = "Phono Input Channel B", + .private_value = _MAKE_NI_CONTROL(0x02, 0x05), + }, +}; + +static struct snd_kcontrol_new snd_nativeinstruments_ta10_mixers[] = { + { + .name = "Direct Thru Channel A", + .private_value = _MAKE_NI_CONTROL(0x01, 0x03), + }, + { + .name = "Direct Thru Channel B", + .private_value = _MAKE_NI_CONTROL(0x01, 0x05), + }, + { + .name = "Direct Thru Channel C", + .private_value = _MAKE_NI_CONTROL(0x01, 0x07), + }, + { + .name = "Direct Thru Channel D", + .private_value = _MAKE_NI_CONTROL(0x01, 0x09), + }, + { + .name = "Phono Input Channel A", + .private_value = _MAKE_NI_CONTROL(0x02, 0x03), + }, + { + .name = "Phono Input Channel B", + .private_value = _MAKE_NI_CONTROL(0x02, 0x05), + }, + { + .name = "Phono Input Channel C", + .private_value = _MAKE_NI_CONTROL(0x02, 0x07), + }, + { + .name = "Phono Input Channel D", + .private_value = _MAKE_NI_CONTROL(0x02, 0x09), + }, +}; + +static int snd_nativeinstruments_create_mixer(struct usb_mixer_interface *mixer, + const struct snd_kcontrol_new *kc, + unsigned int count) +{ + int i, err = 0; + struct snd_kcontrol_new template = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .get = snd_nativeinstruments_control_get, + .put = snd_nativeinstruments_control_put, + .info = snd_ctl_boolean_mono_info, + }; + + for (i = 0; i < count; i++) { + struct snd_kcontrol *c; + + template.name = kc[i].name; + template.private_value = kc[i].private_value; + + c = snd_ctl_new1(&template, mixer); + err = snd_ctl_add(mixer->chip->card, c); + + if (err < 0) + break; + } + + return err; +} + void snd_emuusb_set_samplerate(struct snd_usb_audio *chip, unsigned char samplerate_id) { @@ -367,31 +502,44 @@ void snd_emuusb_set_samplerate(struct snd_usb_audio *chip, int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) { - int err; + int err = 0; struct snd_info_entry *entry; if ((err = snd_usb_soundblaster_remote_init(mixer)) < 0) return err; - if (mixer->chip->usb_id == USB_ID(0x041e, 0x3020) || - mixer->chip->usb_id == USB_ID(0x041e, 0x3040) || - mixer->chip->usb_id == USB_ID(0x041e, 0x3042) || - mixer->chip->usb_id == USB_ID(0x041e, 0x3048)) { - if ((err = snd_audigy2nx_controls_create(mixer)) < 0) - return err; + switch (mixer->chip->usb_id) { + case USB_ID(0x041e, 0x3020): + case USB_ID(0x041e, 0x3040): + case USB_ID(0x041e, 0x3042): + case USB_ID(0x041e, 0x3048): + err = snd_audigy2nx_controls_create(mixer); + if (err < 0) + break; if (!snd_card_proc_new(mixer->chip->card, "audigy2nx", &entry)) snd_info_set_text_ops(entry, mixer, snd_audigy2nx_proc_read); - } + break; - if (mixer->chip->usb_id == USB_ID(0x0b05, 0x1739) || - mixer->chip->usb_id == USB_ID(0x0b05, 0x1743)) { + case USB_ID(0x0b05, 0x1739): + case USB_ID(0x0b05, 0x1743): err = snd_xonar_u1_controls_create(mixer); - if (err < 0) - return err; + break; + + case USB_ID(0x17cc, 0x1011): /* Traktor Audio 6 */ + err = snd_nativeinstruments_create_mixer(mixer, + snd_nativeinstruments_ta6_mixers, + ARRAY_SIZE(snd_nativeinstruments_ta6_mixers)); + break; + + case USB_ID(0x17cc, 0x1021): /* Traktor Audio 10 */ + err = snd_nativeinstruments_create_mixer(mixer, + snd_nativeinstruments_ta10_mixers, + ARRAY_SIZE(snd_nativeinstruments_ta10_mixers)); + break; } - return 0; + return err; } void snd_usb_mixer_rc_memory_change(struct usb_mixer_interface *mixer, diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index e3f680526cb..b8dcbf407bb 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -32,6 +32,7 @@ #include "helper.h" #include "pcm.h" #include "clock.h" +#include "power.h" /* * return the current pcm pointer. just based on the hwptr_done value. @@ -739,6 +740,9 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre pt = 125 * (1 << fp->datainterval); ptmin = min(ptmin, pt); } + err = snd_usb_autoresume(subs->stream->chip); + if (err < 0) + return err; param_period_time_if_needed = SNDRV_PCM_HW_PARAM_PERIOD_TIME; if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) @@ -756,21 +760,21 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre SNDRV_PCM_HW_PARAM_CHANNELS, param_period_time_if_needed, -1)) < 0) - return err; + goto rep_err; if ((err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, hw_rule_channels, subs, SNDRV_PCM_HW_PARAM_FORMAT, SNDRV_PCM_HW_PARAM_RATE, param_period_time_if_needed, -1)) < 0) - return err; + goto rep_err; if ((err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_FORMAT, hw_rule_format, subs, SNDRV_PCM_HW_PARAM_RATE, SNDRV_PCM_HW_PARAM_CHANNELS, param_period_time_if_needed, -1)) < 0) - return err; + goto rep_err; if (param_period_time_if_needed >= 0) { err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_TIME, @@ -780,11 +784,15 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre SNDRV_PCM_HW_PARAM_RATE, -1); if (err < 0) - return err; + goto rep_err; } if ((err = snd_usb_pcm_check_knot(runtime, subs)) < 0) - return err; + goto rep_err; return 0; + +rep_err: + snd_usb_autosuspend(subs->stream->chip); + return err; } static int snd_usb_pcm_open(struct snd_pcm_substream *substream, int direction) @@ -798,6 +806,7 @@ static int snd_usb_pcm_open(struct snd_pcm_substream *substream, int direction) runtime->hw = snd_usb_hardware; runtime->private_data = subs; subs->pcm_substream = substream; + /* runtime PM is also done there */ return setup_hw_info(runtime, subs); } @@ -811,6 +820,7 @@ static int snd_usb_pcm_close(struct snd_pcm_substream *substream, int direction) subs->interface = -1; } subs->pcm_substream = NULL; + snd_usb_autosuspend(subs->stream->chip); return 0; } diff --git a/sound/usb/power.h b/sound/usb/power.h new file mode 100644 index 00000000000..48ee51dcb71 --- /dev/null +++ b/sound/usb/power.h @@ -0,0 +1,17 @@ +#ifndef __USBAUDIO_POWER_H +#define __USBAUDIO_POWER_H + +#ifdef CONFIG_PM +int snd_usb_autoresume(struct snd_usb_audio *chip); +void snd_usb_autosuspend(struct snd_usb_audio *chip); +#else +static inline int snd_usb_autoresume(struct snd_usb_audio *chip) +{ + return 0; +} +static inline void snd_usb_autosuspend(struct snd_usb_audio *chip) +{ +} +#endif + +#endif /* __USBAUDIO_POWER_H */ diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 921a86fd988..c0dcfca9b5b 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -2290,6 +2290,20 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, +/* Native Instruments MK2 series */ +{ + /* Traktor Audio 6 */ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x17cc, + .idProduct = 0x1010, +}, +{ + /* Traktor Audio 10 */ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = 0x17cc, + .idProduct = 0x1020, +}, + /* Miditech devices */ { USB_DEVICE(0x4752, 0x0011), diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index e314cdb8500..355759bad58 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -425,6 +425,34 @@ static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev) } /* + * Some sound cards from Native Instruments are in fact compliant to the USB + * audio standard of version 2 and other approved USB standards, even though + * they come up as vendor-specific device when first connected. + * + * However, they can be told to come up with a new set of descriptors + * upon their next enumeration, and the interfaces announced by the new + * descriptors will then be handled by the kernel's class drivers. As the + * product ID will also change, no further checks are required. + */ + +static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev) +{ + int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE, + cpu_to_le16(1), 0, NULL, 0, 1000); + + if (ret < 0) + return ret; + + usb_reset_device(dev); + + /* return -EAGAIN, so the creation of an audio interface for this + * temporary device is aborted. The device will reconnect with a + * new product ID */ + return -EAGAIN; +} + +/* * Setup quirks */ #define AUDIOPHILE_SET 0x01 /* if set, parse device_setup */ @@ -489,27 +517,33 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, u32 id = USB_ID(le16_to_cpu(dev->descriptor.idVendor), le16_to_cpu(dev->descriptor.idProduct)); - /* SB Extigy needs special boot-up sequence */ - /* if more models come, this will go to the quirk list. */ - if (id == USB_ID(0x041e, 0x3000)) + switch (id) { + case USB_ID(0x041e, 0x3000): + /* SB Extigy needs special boot-up sequence */ + /* if more models come, this will go to the quirk list. */ return snd_usb_extigy_boot_quirk(dev, intf); - /* SB Audigy 2 NX needs its own boot-up magic, too */ - if (id == USB_ID(0x041e, 0x3020)) + case USB_ID(0x041e, 0x3020): + /* SB Audigy 2 NX needs its own boot-up magic, too */ return snd_usb_audigy2nx_boot_quirk(dev); - /* C-Media CM106 / Turtle Beach Audio Advantage Roadie */ - if (id == USB_ID(0x10f5, 0x0200)) + case USB_ID(0x10f5, 0x0200): + /* C-Media CM106 / Turtle Beach Audio Advantage Roadie */ return snd_usb_cm106_boot_quirk(dev); - /* C-Media CM6206 / CM106-Like Sound Device */ - if (id == USB_ID(0x0d8c, 0x0102)) + case USB_ID(0x0d8c, 0x0102): + /* C-Media CM6206 / CM106-Like Sound Device */ return snd_usb_cm6206_boot_quirk(dev); - /* Access Music VirusTI Desktop */ - if (id == USB_ID(0x133e, 0x0815)) + case USB_ID(0x133e, 0x0815): + /* Access Music VirusTI Desktop */ return snd_usb_accessmusic_boot_quirk(dev); + case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */ + case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */ + return snd_usb_nativeinstruments_boot_quirk(dev); + } + return 0; } diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 6e66fffe87f..32f2a97f2f1 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -34,10 +34,14 @@ struct snd_usb_audio { int index; struct usb_device *dev; struct snd_card *card; + struct usb_interface *pm_intf; u32 usb_id; - int shutdown; struct mutex shutdown_mutex; + unsigned int shutdown:1; + unsigned int probing:1; + unsigned int autosuspended:1; unsigned int txfr_quirk:1; /* Subframe boundaries on transfers */ + int num_interfaces; int num_suspended_intf; |