diff options
Diffstat (limited to 'sound/usb')
-rw-r--r-- | sound/usb/caiaq/device.c | 2 | ||||
-rw-r--r-- | sound/usb/endpoint.c | 73 | ||||
-rw-r--r-- | sound/usb/mixer_quirks.c | 159 | ||||
-rw-r--r-- | sound/usb/pcm.c | 61 |
4 files changed, 147 insertions, 148 deletions
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c index 64aed432ae2..7da0d0aa72c 100644 --- a/sound/usb/caiaq/device.c +++ b/sound/usb/caiaq/device.c @@ -485,7 +485,7 @@ static int __devinit snd_probe(struct usb_interface *intf, const struct usb_device_id *id) { int ret; - struct snd_card *card; + struct snd_card *card = NULL; struct usb_device *device = interface_to_usbdev(intf); ret = create_card(device, intf, &card); diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index e6906901deb..0f647d22cb4 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -414,7 +414,7 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip, { struct list_head *p; struct snd_usb_endpoint *ep; - int ret, is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK; + int is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK; mutex_lock(&chip->mutex); @@ -434,16 +434,6 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip, type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync", ep_num); - /* select the alt setting once so the endpoints become valid */ - ret = usb_set_interface(chip->dev, alts->desc.bInterfaceNumber, - alts->desc.bAlternateSetting); - if (ret < 0) { - snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n", - __func__, ret); - ep = NULL; - goto __exit_unlock; - } - ep = kzalloc(sizeof(*ep), GFP_KERNEL); if (!ep) goto __exit_unlock; @@ -831,9 +821,6 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep) if (++ep->use_count != 1) return 0; - if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags))) - return -EINVAL; - /* just to be sure */ deactivate_urbs(ep, 0, 1); wait_clear_urbs(ep); @@ -911,9 +898,6 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep, if (snd_BUG_ON(ep->use_count == 0)) return; - if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags))) - return; - if (--ep->use_count == 0) { deactivate_urbs(ep, force, can_sleep); ep->data_subs = NULL; @@ -927,42 +911,6 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep, } /** - * snd_usb_endpoint_activate: activate an snd_usb_endpoint - * - * @ep: the endpoint to activate - * - * If the endpoint is not currently in use, this functions will select the - * correct alternate interface setting for the interface of this endpoint. - * - * In case of any active users, this functions does nothing. - * - * Returns an error if usb_set_interface() failed, 0 in all other - * cases. - */ -int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep) -{ - if (ep->use_count != 0) - return 0; - - if (!ep->chip->shutdown && - !test_and_set_bit(EP_FLAG_ACTIVATED, &ep->flags)) { - int ret; - - ret = usb_set_interface(ep->chip->dev, ep->iface, ep->alt_idx); - if (ret < 0) { - snd_printk(KERN_ERR "%s() usb_set_interface() failed, ret = %d\n", - __func__, ret); - clear_bit(EP_FLAG_ACTIVATED, &ep->flags); - return ret; - } - - return 0; - } - - return -EBUSY; -} - -/** * snd_usb_endpoint_deactivate: deactivate an snd_usb_endpoint * * @ep: the endpoint to deactivate @@ -980,24 +928,15 @@ int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep) if (!ep) return -EINVAL; + deactivate_urbs(ep, 1, 1); + wait_clear_urbs(ep); + if (ep->use_count != 0) return 0; - if (!ep->chip->shutdown && - test_and_clear_bit(EP_FLAG_ACTIVATED, &ep->flags)) { - int ret; - - ret = usb_set_interface(ep->chip->dev, ep->iface, 0); - if (ret < 0) { - snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n", - __func__, ret); - return ret; - } + clear_bit(EP_FLAG_ACTIVATED, &ep->flags); - return 0; - } - - return -EBUSY; + return 0; } /** diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 41f4b691192..690000db0ec 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -42,6 +42,13 @@ extern struct snd_kcontrol_new *snd_usb_feature_unit_ctl; +struct std_mono_table { + unsigned int unitid, control, cmask; + int val_type; + const char *name; + snd_kcontrol_tlv_rw_t *tlv_callback; +}; + /* private_free callback */ static void usb_mixer_elem_free(struct snd_kcontrol *kctl) { @@ -114,6 +121,25 @@ static int snd_create_std_mono_ctl(struct usb_mixer_interface *mixer, } /* + * Create a set of standard UAC controls from a table + */ +static int snd_create_std_mono_table(struct usb_mixer_interface *mixer, + struct std_mono_table *t) +{ + int err; + + while (t->name != NULL) { + err = snd_create_std_mono_ctl(mixer, t->unitid, t->control, + t->cmask, t->val_type, t->name, t->tlv_callback); + if (err < 0) + return err; + t++; + } + + return 0; +} + +/* * Sound Blaster remote control configuration * * format of remote control data: @@ -916,61 +942,6 @@ static int snd_ftu_create_mixer(struct usb_mixer_interface *mixer) return 0; } - -/* - * Create mixer for Electrix Ebox-44 - * - * The mixer units from this device are corrupt, and even where they - * are valid they presents mono controls as L and R channels of - * stereo. So we create a good mixer in code. - */ - -static int snd_ebox44_create_mixer(struct usb_mixer_interface *mixer) -{ - int err; - - err = snd_create_std_mono_ctl(mixer, 4, 1, 0x0, USB_MIXER_INV_BOOLEAN, - "Headphone Playback Switch", NULL); - if (err < 0) - return err; - err = snd_create_std_mono_ctl(mixer, 4, 2, 0x1, USB_MIXER_S16, - "Headphone A Mix Playback Volume", NULL); - if (err < 0) - return err; - err = snd_create_std_mono_ctl(mixer, 4, 2, 0x2, USB_MIXER_S16, - "Headphone B Mix Playback Volume", NULL); - if (err < 0) - return err; - - err = snd_create_std_mono_ctl(mixer, 7, 1, 0x0, USB_MIXER_INV_BOOLEAN, - "Output Playback Switch", NULL); - if (err < 0) - return err; - err = snd_create_std_mono_ctl(mixer, 7, 2, 0x1, USB_MIXER_S16, - "Output A Playback Volume", NULL); - if (err < 0) - return err; - err = snd_create_std_mono_ctl(mixer, 7, 2, 0x2, USB_MIXER_S16, - "Output B Playback Volume", NULL); - if (err < 0) - return err; - - err = snd_create_std_mono_ctl(mixer, 10, 1, 0x0, USB_MIXER_INV_BOOLEAN, - "Input Capture Switch", NULL); - if (err < 0) - return err; - err = snd_create_std_mono_ctl(mixer, 10, 2, 0x1, USB_MIXER_S16, - "Input A Capture Volume", NULL); - if (err < 0) - return err; - err = snd_create_std_mono_ctl(mixer, 10, 2, 0x2, USB_MIXER_S16, - "Input B Capture Volume", NULL); - if (err < 0) - return err; - - return 0; -} - void snd_emuusb_set_samplerate(struct snd_usb_audio *chip, unsigned char samplerate_id) { @@ -990,6 +961,81 @@ void snd_emuusb_set_samplerate(struct snd_usb_audio *chip, } } +/* + * The mixer units for Ebox-44 are corrupt, and even where they + * are valid they presents mono controls as L and R channels of + * stereo. So we provide a good mixer here. + */ +struct std_mono_table ebox44_table[] = { + { + .unitid = 4, + .control = 1, + .cmask = 0x0, + .val_type = USB_MIXER_INV_BOOLEAN, + .name = "Headphone Playback Switch" + }, + { + .unitid = 4, + .control = 2, + .cmask = 0x1, + .val_type = USB_MIXER_S16, + .name = "Headphone A Mix Playback Volume" + }, + { + .unitid = 4, + .control = 2, + .cmask = 0x2, + .val_type = USB_MIXER_S16, + .name = "Headphone B Mix Playback Volume" + }, + + { + .unitid = 7, + .control = 1, + .cmask = 0x0, + .val_type = USB_MIXER_INV_BOOLEAN, + .name = "Output Playback Switch" + }, + { + .unitid = 7, + .control = 2, + .cmask = 0x1, + .val_type = USB_MIXER_S16, + .name = "Output A Playback Volume" + }, + { + .unitid = 7, + .control = 2, + .cmask = 0x2, + .val_type = USB_MIXER_S16, + .name = "Output B Playback Volume" + }, + + { + .unitid = 10, + .control = 1, + .cmask = 0x0, + .val_type = USB_MIXER_INV_BOOLEAN, + .name = "Input Capture Switch" + }, + { + .unitid = 10, + .control = 2, + .cmask = 0x1, + .val_type = USB_MIXER_S16, + .name = "Input A Capture Volume" + }, + { + .unitid = 10, + .control = 2, + .cmask = 0x2, + .val_type = USB_MIXER_S16, + .name = "Input B Capture Volume" + }, + + {} +}; + int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) { int err = 0; @@ -1035,7 +1081,8 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) break; case USB_ID(0x200c, 0x1018): /* Electrix Ebox-44 */ - err = snd_ebox44_create_mixer(mixer); + /* detection is disabled in mixer_maps.c */ + err = snd_create_std_mono_table(mixer, ebox44_table); break; } diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index 54607f8c4f6..a1298f37942 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -261,19 +261,6 @@ static void stop_endpoints(struct snd_usb_substream *subs, force, can_sleep, wait); } -static int activate_endpoints(struct snd_usb_substream *subs) -{ - if (subs->sync_endpoint) { - int ret; - - ret = snd_usb_endpoint_activate(subs->sync_endpoint); - if (ret < 0) - return ret; - } - - return snd_usb_endpoint_activate(subs->data_endpoint); -} - static int deactivate_endpoints(struct snd_usb_substream *subs) { int reta, retb; @@ -314,6 +301,33 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt) if (fmt == subs->cur_audiofmt) return 0; + /* close the old interface */ + if (subs->interface >= 0 && subs->interface != fmt->iface) { + err = usb_set_interface(subs->dev, subs->interface, 0); + if (err < 0) { + snd_printk(KERN_ERR "%d:%d:%d: return to setting 0 failed (%d)\n", + dev->devnum, fmt->iface, fmt->altsetting, err); + return -EIO; + } + subs->interface = -1; + subs->altset_idx = 0; + } + + /* set interface */ + if (subs->interface != fmt->iface || + subs->altset_idx != fmt->altset_idx) { + err = usb_set_interface(dev, fmt->iface, fmt->altsetting); + if (err < 0) { + snd_printk(KERN_ERR "%d:%d:%d: usb_set_interface failed (%d)\n", + dev->devnum, fmt->iface, fmt->altsetting, err); + return -EIO; + } + snd_printdd(KERN_INFO "setting usb interface %d:%d\n", + fmt->iface, fmt->altsetting); + subs->interface = fmt->iface; + subs->altset_idx = fmt->altset_idx; + } + subs->data_endpoint = snd_usb_add_endpoint(subs->stream->chip, alts, fmt->endpoint, subs->direction, SND_USB_ENDPOINT_TYPE_DATA); @@ -387,7 +401,7 @@ add_sync_ep: subs->data_endpoint->sync_master = subs->sync_endpoint; } - if ((err = snd_usb_init_pitch(subs->stream->chip, subs->interface, alts, fmt)) < 0) + if ((err = snd_usb_init_pitch(subs->stream->chip, fmt->iface, alts, fmt)) < 0) return err; subs->cur_audiofmt = fmt; @@ -450,7 +464,7 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream, struct usb_interface *iface; iface = usb_ifnum_to_if(subs->dev, fmt->iface); alts = &iface->altsetting[fmt->altset_idx]; - ret = snd_usb_init_sample_rate(subs->stream->chip, subs->interface, alts, fmt, rate); + ret = snd_usb_init_sample_rate(subs->stream->chip, fmt->iface, alts, fmt, rate); if (ret < 0) return ret; subs->cur_rate = rate; @@ -460,12 +474,6 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream, mutex_lock(&subs->stream->chip->shutdown_mutex); /* format changed */ stop_endpoints(subs, 0, 0, 0); - deactivate_endpoints(subs); - - ret = activate_endpoints(subs); - if (ret < 0) - goto unlock; - ret = snd_usb_endpoint_set_params(subs->data_endpoint, hw_params, fmt, subs->sync_endpoint); if (ret < 0) @@ -500,6 +508,7 @@ static int snd_usb_hw_free(struct snd_pcm_substream *substream) subs->period_bytes = 0; mutex_lock(&subs->stream->chip->shutdown_mutex); stop_endpoints(subs, 0, 1, 1); + deactivate_endpoints(subs); mutex_unlock(&subs->stream->chip->shutdown_mutex); return snd_pcm_lib_free_vmalloc_buffer(substream); } @@ -938,16 +947,20 @@ static int snd_usb_pcm_open(struct snd_pcm_substream *substream, int direction) static int snd_usb_pcm_close(struct snd_pcm_substream *substream, int direction) { - int ret; struct snd_usb_stream *as = snd_pcm_substream_chip(substream); struct snd_usb_substream *subs = &as->substream[direction]; stop_endpoints(subs, 0, 0, 0); - ret = deactivate_endpoints(subs); + + if (!as->chip->shutdown && subs->interface >= 0) { + usb_set_interface(subs->dev, subs->interface, 0); + subs->interface = -1; + } + subs->pcm_substream = NULL; snd_usb_autosuspend(subs->stream->chip); - return ret; + return 0; } /* Since a URB can handle only a single linear buffer, we must use double |