summaryrefslogtreecommitdiffstats
path: root/sound
diff options
context:
space:
mode:
Diffstat (limited to 'sound')
-rw-r--r--sound/oss/Kconfig30
-rw-r--r--sound/pci/ac97/ac97_codec.c4
2 files changed, 24 insertions, 10 deletions
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 1b7c3dfc2b4..97e38b66558 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -5,6 +5,20 @@
#
# Prompt user for primary drivers.
+config OSS_OBSOLETE_DRIVER
+ bool "Obsolete OSS drivers"
+ depends on SOUND_PRIME
+ help
+ This option enables support for obsolete OSS drivers that
+ are scheduled for removal in the near future since there
+ are ALSA drivers for the same hardware.
+
+ Please contact Adrian Bunk <bunk@stusta.de> if you had to
+ say Y here because your soundcard is not properly supported
+ by ALSA.
+
+ If unsure, say N.
+
config SOUND_BT878
tristate "BT878 audio dma"
depends on SOUND_PRIME && PCI
@@ -23,7 +37,7 @@ config SOUND_BT878
config SOUND_EMU10K1
tristate "Creative SBLive! (EMU10K1)"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OSS_OBSOLETE_DRIVER
---help---
Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
such as the Creative SBLive!, SB PCI512 or Emu-APS.
@@ -49,7 +63,7 @@ config MIDI_EMU10K1
config SOUND_FUSION
tristate "Crystal SoundFusion (CS4280/461x)"
- depends on SOUND_PRIME && PCI
+ depends on SOUND_PRIME && PCI && OSS_OBSOLETE_DRIVER
help
This module drives the Crystal SoundFusion devices (CS4280/46xx
series) when wired as native sound drivers with AC97 codecs. If
@@ -440,7 +454,7 @@ config SOUND_DMAP
config SOUND_AD1816
tristate "AD1816(A) based cards (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SOUND_OSS
+ depends on EXPERIMENTAL && SOUND_OSS && OSS_OBSOLETE_DRIVER
help
Say M here if you have a sound card based on the Analog Devices
AD1816(A) chip.
@@ -450,21 +464,21 @@ config SOUND_AD1816
config SOUND_AD1889
tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)"
- depends on EXPERIMENTAL && SOUND_OSS && PCI
+ depends on EXPERIMENTAL && SOUND_OSS && PCI && OSS_OBSOLETE_DRIVER
help
Say M here if you have a sound card based on the Analog Devices
AD1889 chip.
config SOUND_ADLIB
tristate "Adlib Cards"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
help
Includes ASB 64 4D. Information on programming AdLib cards is
available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>.
config SOUND_ACI_MIXER
tristate "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
---help---
ACI (Audio Command Interface) is a protocol used to communicate with
the microcontroller on some sound cards produced by miro and
@@ -586,7 +600,7 @@ config SOUND_MPU401
config SOUND_NM256
tristate "NM256AV/NM256ZX audio support"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
help
Say M here to include audio support for the NeoMagic 256AV/256ZX
chipsets. These are the audio chipsets found in the Sony
@@ -706,7 +720,7 @@ config SOUND_YM3812
config SOUND_OPL3SA2
tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
- depends on SOUND_OSS
+ depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
help
Say Y or M if you have a card based on one of these Yamaha sound
chipsets or the "SAx", which is actually a SA3. Read
diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index 0abf2808d59..51e83d7a839 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -573,7 +573,7 @@ AC97_SINGLE("PC Speaker Playback Volume", AC97_PC_BEEP, 1, 15, 1)
};
static const struct snd_kcontrol_new snd_ac97_controls_mic_boost =
- AC97_SINGLE("Mic Boost (+20dB) Switch", AC97_MIC, 6, 1, 0);
+ AC97_SINGLE("Mic Boost (+20dB)", AC97_MIC, 6, 1, 0);
static const char* std_rec_sel[] = {"Mic", "CD", "Video", "Aux", "Line", "Mix", "Mix Mono", "Phone"};
@@ -615,7 +615,7 @@ AC97_SINGLE("Simulated Stereo Enhancement", AC97_GENERAL_PURPOSE, 14, 1, 0),
AC97_SINGLE("3D Control - Switch", AC97_GENERAL_PURPOSE, 13, 1, 0),
AC97_SINGLE("Loudness (bass boost)", AC97_GENERAL_PURPOSE, 12, 1, 0),
AC97_ENUM("Mono Output Select", std_enum[2]),
-AC97_ENUM("Mic Select Capture Switch", std_enum[3]),
+AC97_ENUM("Mic Select", std_enum[3]),
AC97_SINGLE("ADC/DAC Loopback", AC97_GENERAL_PURPOSE, 7, 1, 0)
};