diff options
Diffstat (limited to 'sound')
-rw-r--r-- | sound/soc/atmel/Kconfig | 21 | ||||
-rw-r--r-- | sound/soc/atmel/Makefile | 4 | ||||
-rw-r--r-- | sound/soc/atmel/atmel-pcm-dma.c | 118 | ||||
-rw-r--r-- | sound/soc/atmel/atmel_ssc_dai.c | 36 | ||||
-rw-r--r-- | sound/soc/atmel/atmel_wm8904.c | 254 | ||||
-rw-r--r-- | sound/soc/atmel/sam9x5_wm8731.c | 208 |
6 files changed, 522 insertions, 119 deletions
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig index 3fdd87fa18a..e48d38a1b95 100644 --- a/sound/soc/atmel/Kconfig +++ b/sound/soc/atmel/Kconfig @@ -13,6 +13,7 @@ config SND_ATMEL_SOC_PDC config SND_ATMEL_SOC_DMA tristate depends on SND_ATMEL_SOC + select SND_SOC_GENERIC_DMAENGINE_PCM config SND_ATMEL_SOC_SSC tristate @@ -32,6 +33,26 @@ config SND_AT91_SOC_SAM9G20_WM8731 Say Y if you want to add support for SoC audio on WM8731-based AT91sam9g20 evaluation board. +config SND_ATMEL_SOC_WM8904 + tristate "Atmel ASoC driver for boards using WM8904 codec" + depends on ARCH_AT91 && ATMEL_SSC && SND_ATMEL_SOC + select SND_ATMEL_SOC_SSC + select SND_ATMEL_SOC_DMA + select SND_SOC_WM8904 + help + Say Y if you want to add support for Atmel ASoC driver for boards using + WM8904 codec. + +config SND_AT91_SOC_SAM9X5_WM8731 + tristate "SoC Audio support for WM8731-based at91sam9x5 board" + depends on ATMEL_SSC && SND_ATMEL_SOC && SOC_AT91SAM9X5 + select SND_ATMEL_SOC_SSC + select SND_ATMEL_SOC_DMA + select SND_SOC_WM8731 + help + Say Y if you want to add support for audio SoC on an + at91sam9x5 based board that is using WM8731 codec. + config SND_AT91_SOC_AFEB9260 tristate "SoC Audio support for AFEB9260 board" depends on ARCH_AT91 && ATMEL_SSC && ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile index 41967ccb6f4..5baabc8bde3 100644 --- a/sound/soc/atmel/Makefile +++ b/sound/soc/atmel/Makefile @@ -11,6 +11,10 @@ obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o # AT91 Machine Support snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o +snd-atmel-soc-wm8904-objs := atmel_wm8904.o +snd-soc-sam9x5-wm8731-objs := sam9x5_wm8731.o obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o +obj-$(CONFIG_SND_ATMEL_SOC_WM8904) += snd-atmel-soc-wm8904.o +obj-$(CONFIG_SND_AT91_SOC_SAM9X5_WM8731) += snd-soc-sam9x5-wm8731.o obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o diff --git a/sound/soc/atmel/atmel-pcm-dma.c b/sound/soc/atmel/atmel-pcm-dma.c index d1282652679..06082e5e5dc 100644 --- a/sound/soc/atmel/atmel-pcm-dma.c +++ b/sound/soc/atmel/atmel-pcm-dma.c @@ -91,138 +91,52 @@ static void atmel_pcm_dma_irq(u32 ssc_sr, } } -/*--------------------------------------------------------------------------*\ - * DMAENGINE operations -\*--------------------------------------------------------------------------*/ -static bool filter(struct dma_chan *chan, void *slave) -{ - struct at_dma_slave *sl = slave; - - if (sl->dma_dev == chan->device->dev) { - chan->private = sl; - return true; - } else { - return false; - } -} - static int atmel_pcm_configure_dma(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, struct atmel_pcm_dma_params *prtd) + struct snd_pcm_hw_params *params, struct dma_slave_config *slave_config) { + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct atmel_pcm_dma_params *prtd; struct ssc_device *ssc; - struct dma_chan *dma_chan; - struct dma_slave_config slave_config; int ret; + prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); ssc = prtd->ssc; - ret = snd_hwparams_to_dma_slave_config(substream, params, - &slave_config); + ret = snd_hwparams_to_dma_slave_config(substream, params, slave_config); if (ret) { pr_err("atmel-pcm: hwparams to dma slave configure failed\n"); return ret; } if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - slave_config.dst_addr = (dma_addr_t)ssc->phybase + SSC_THR; - slave_config.dst_maxburst = 1; + slave_config->dst_addr = ssc->phybase + SSC_THR; + slave_config->dst_maxburst = 1; } else { - slave_config.src_addr = (dma_addr_t)ssc->phybase + SSC_RHR; - slave_config.src_maxburst = 1; - } - - dma_chan = snd_dmaengine_pcm_get_chan(substream); - if (dmaengine_slave_config(dma_chan, &slave_config)) { - pr_err("atmel-pcm: failed to configure dma channel\n"); - ret = -EBUSY; - return ret; - } - - return 0; -} - -static int atmel_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct atmel_pcm_dma_params *prtd; - struct ssc_device *ssc; - struct at_dma_slave *sdata = NULL; - int ret; - - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - - prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); - ssc = prtd->ssc; - if (ssc->pdev) - sdata = ssc->pdev->dev.platform_data; - - ret = snd_dmaengine_pcm_open_request_chan(substream, filter, sdata); - if (ret) { - pr_err("atmel-pcm: dmaengine pcm open failed\n"); - return -EINVAL; - } - - ret = atmel_pcm_configure_dma(substream, params, prtd); - if (ret) { - pr_err("atmel-pcm: failed to configure dmai\n"); - goto err; + slave_config->src_addr = ssc->phybase + SSC_RHR; + slave_config->src_maxburst = 1; } prtd->dma_intr_handler = atmel_pcm_dma_irq; return 0; -err: - snd_dmaengine_pcm_close_release_chan(substream); - return ret; } -static int atmel_pcm_dma_prepare(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct atmel_pcm_dma_params *prtd; - - prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); - - ssc_writex(prtd->ssc->regs, SSC_IER, prtd->mask->ssc_error); - ssc_writex(prtd->ssc->regs, SSC_CR, prtd->mask->ssc_enable); - - return 0; -} - -static int atmel_pcm_open(struct snd_pcm_substream *substream) -{ - snd_soc_set_runtime_hwparams(substream, &atmel_pcm_dma_hardware); - - return 0; -} - -static struct snd_pcm_ops atmel_pcm_ops = { - .open = atmel_pcm_open, - .close = snd_dmaengine_pcm_close_release_chan, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = atmel_pcm_hw_params, - .prepare = atmel_pcm_dma_prepare, - .trigger = snd_dmaengine_pcm_trigger, - .pointer = snd_dmaengine_pcm_pointer_no_residue, - .mmap = atmel_pcm_mmap, -}; - -static struct snd_soc_platform_driver atmel_soc_platform = { - .ops = &atmel_pcm_ops, - .pcm_new = atmel_pcm_new, - .pcm_free = atmel_pcm_free, +static const struct snd_dmaengine_pcm_config atmel_dmaengine_pcm_config = { + .prepare_slave_config = atmel_pcm_configure_dma, + .pcm_hardware = &atmel_pcm_dma_hardware, + .prealloc_buffer_size = ATMEL_SSC_DMABUF_SIZE, }; int atmel_pcm_dma_platform_register(struct device *dev) { - return snd_soc_register_platform(dev, &atmel_soc_platform); + return snd_dmaengine_pcm_register(dev, &atmel_dmaengine_pcm_config, + SND_DMAENGINE_PCM_FLAG_NO_RESIDUE); } EXPORT_SYMBOL(atmel_pcm_dma_platform_register); void atmel_pcm_dma_platform_unregister(struct device *dev) { - snd_soc_unregister_platform(dev); + snd_dmaengine_pcm_unregister(dev); } EXPORT_SYMBOL(atmel_pcm_dma_platform_unregister); diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index f3fdfa07fcb..0ecf356027f 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -73,6 +73,7 @@ static struct atmel_ssc_mask ssc_tx_mask = { .ssc_disable = SSC_BIT(CR_TXDIS), .ssc_endx = SSC_BIT(SR_ENDTX), .ssc_endbuf = SSC_BIT(SR_TXBUFE), + .ssc_error = SSC_BIT(SR_OVRUN), .pdc_enable = ATMEL_PDC_TXTEN, .pdc_disable = ATMEL_PDC_TXTDIS, }; @@ -82,6 +83,7 @@ static struct atmel_ssc_mask ssc_rx_mask = { .ssc_disable = SSC_BIT(CR_RXDIS), .ssc_endx = SSC_BIT(SR_ENDRX), .ssc_endbuf = SSC_BIT(SR_RXBUFF), + .ssc_error = SSC_BIT(SR_OVRUN), .pdc_enable = ATMEL_PDC_RXTEN, .pdc_disable = ATMEL_PDC_RXTDIS, }; @@ -196,15 +198,27 @@ static int atmel_ssc_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; - int dir_mask; + struct atmel_pcm_dma_params *dma_params; + int dir, dir_mask; pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n", ssc_readl(ssc_p->ssc->regs, SR)); - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + dir = 0; dir_mask = SSC_DIR_MASK_PLAYBACK; - else + } else { + dir = 1; dir_mask = SSC_DIR_MASK_CAPTURE; + } + + dma_params = &ssc_dma_params[dai->id][dir]; + dma_params->ssc = ssc_p->ssc; + dma_params->substream = substream; + + ssc_p->dma_params[dir] = dma_params; + + snd_soc_dai_set_dma_data(dai, substream, dma_params); spin_lock_irq(&ssc_p->lock); if (ssc_p->dir_mask & dir_mask) { @@ -325,7 +339,6 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { - struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); int id = dai->id; struct atmel_ssc_info *ssc_p = &ssc_info[id]; struct atmel_pcm_dma_params *dma_params; @@ -344,19 +357,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, else dir = 1; - dma_params = &ssc_dma_params[id][dir]; - dma_params->ssc = ssc_p->ssc; - dma_params->substream = substream; - - ssc_p->dma_params[dir] = dma_params; - - /* - * The snd_soc_pcm_stream->dma_data field is only used to communicate - * the appropriate DMA parameters to the pcm driver hw_params() - * function. It should not be used for other purposes - * as it is common to all substreams. - */ - snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_params); + dma_params = ssc_p->dma_params[dir]; channels = params_channels(params); @@ -648,6 +649,7 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream, dma_params = ssc_p->dma_params[dir]; ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + ssc_writel(ssc_p->ssc->regs, IER, dma_params->mask->ssc_error); pr_debug("%s enabled SSC_SR=0x%08x\n", dir ? "receive" : "transmit", diff --git a/sound/soc/atmel/atmel_wm8904.c b/sound/soc/atmel/atmel_wm8904.c new file mode 100644 index 00000000000..7222380131e --- /dev/null +++ b/sound/soc/atmel/atmel_wm8904.c @@ -0,0 +1,254 @@ +/* + * atmel_wm8904 - Atmel ASoC driver for boards with WM8904 codec. + * + * Copyright (C) 2012 Atmel + * + * Author: Bo Shen <voice.shen@atmel.com> + * + * GPLv2 or later + */ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> + +#include <sound/soc.h> + +#include "../codecs/wm8904.h" +#include "atmel_ssc_dai.h" + +#define MCLK_RATE 32768 + +static struct clk *mclk; + +static const struct snd_soc_dapm_widget atmel_asoc_wm8904_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Mic", NULL), + SND_SOC_DAPM_LINE("Line In Jack", NULL), +}; + +static int atmel_asoc_wm8904_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int ret; + + ret = snd_soc_dai_set_pll(codec_dai, WM8904_FLL_MCLK, WM8904_FLL_MCLK, + 32768, params_rate(params) * 256); + if (ret < 0) { + pr_err("%s - failed to set wm8904 codec PLL.", __func__); + return ret; + } + + /* + * As here wm8904 use FLL output as its system clock + * so calling set_sysclk won't care freq parameter + * then we pass 0 + */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8904_CLK_FLL, + 0, SND_SOC_CLOCK_IN); + if (ret < 0) { + pr_err("%s -failed to set wm8904 SYSCLK\n", __func__); + return ret; + } + + return 0; +} + +static struct snd_soc_ops atmel_asoc_wm8904_ops = { + .hw_params = atmel_asoc_wm8904_hw_params, +}; + +static int atmel_set_bias_level(struct snd_soc_card *card, + struct snd_soc_dapm_context *dapm, + enum snd_soc_bias_level level) +{ + if (dapm->bias_level == SND_SOC_BIAS_STANDBY) { + switch (level) { + case SND_SOC_BIAS_PREPARE: + clk_prepare_enable(mclk); + break; + case SND_SOC_BIAS_OFF: + clk_disable_unprepare(mclk); + break; + default: + break; + } + } + + return 0; +}; + +static struct snd_soc_dai_link atmel_asoc_wm8904_dailink = { + .name = "WM8904", + .stream_name = "WM8904 PCM", + .codec_dai_name = "wm8904-hifi", + .dai_fmt = SND_SOC_DAIFMT_I2S + | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM, + .ops = &atmel_asoc_wm8904_ops, +}; + +static struct snd_soc_card atmel_asoc_wm8904_card = { + .name = "atmel_asoc_wm8904", + .owner = THIS_MODULE, + .set_bias_level = atmel_set_bias_level, + .dai_link = &atmel_asoc_wm8904_dailink, + .num_links = 1, + .dapm_widgets = atmel_asoc_wm8904_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(atmel_asoc_wm8904_dapm_widgets), + .fully_routed = true, +}; + +static int atmel_asoc_wm8904_dt_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *codec_np, *cpu_np; + struct snd_soc_card *card = &atmel_asoc_wm8904_card; + struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink; + int ret; + + if (!np) { + dev_err(&pdev->dev, "only device tree supported\n"); + return -EINVAL; + } + + ret = snd_soc_of_parse_card_name(card, "atmel,model"); + if (ret) { + dev_err(&pdev->dev, "failed to parse card name\n"); + return ret; + } + + ret = snd_soc_of_parse_audio_routing(card, "atmel,audio-routing"); + if (ret) { + dev_err(&pdev->dev, "failed to parse audio routing\n"); + return ret; + } + + cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0); + if (!cpu_np) { + dev_err(&pdev->dev, "failed to get dai and pcm info\n"); + ret = -EINVAL; + return ret; + } + dailink->cpu_of_node = cpu_np; + dailink->platform_of_node = cpu_np; + of_node_put(cpu_np); + + codec_np = of_parse_phandle(np, "atmel,audio-codec", 0); + if (!codec_np) { + dev_err(&pdev->dev, "failed to get codec info\n"); + ret = -EINVAL; + return ret; + } + dailink->codec_of_node = codec_np; + of_node_put(codec_np); + + return 0; +} + +static int atmel_asoc_wm8904_probe(struct platform_device *pdev) +{ + struct snd_soc_card *card = &atmel_asoc_wm8904_card; + struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink; + struct clk *clk_src; + struct pinctrl *pinctrl; + int id, ret; + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + dev_err(&pdev->dev, "failed to request pinctrl\n"); + return PTR_ERR(pinctrl); + } + + card->dev = &pdev->dev; + ret = atmel_asoc_wm8904_dt_init(pdev); + if (ret) { + dev_err(&pdev->dev, "failed to init dt info\n"); + return ret; + } + + id = of_alias_get_id((struct device_node *)dailink->cpu_of_node, "ssc"); + ret = atmel_ssc_set_audio(id); + if (ret != 0) { + dev_err(&pdev->dev, "failed to set SSC %d for audio\n", id); + return ret; + } + + mclk = clk_get(NULL, "pck0"); + if (IS_ERR(mclk)) { + dev_err(&pdev->dev, "failed to get pck0\n"); + ret = PTR_ERR(mclk); + goto err_set_audio; + } + + clk_src = clk_get(NULL, "clk32k"); + if (IS_ERR(clk_src)) { + dev_err(&pdev->dev, "failed to get clk32k\n"); + ret = PTR_ERR(clk_src); + goto err_set_audio; + } + + ret = clk_set_parent(mclk, clk_src); + clk_put(clk_src); + if (ret != 0) { + dev_err(&pdev->dev, "failed to set MCLK parent\n"); + goto err_set_audio; + } + + dev_info(&pdev->dev, "setting pck0 to %dHz\n", MCLK_RATE); + clk_set_rate(mclk, MCLK_RATE); + + ret = snd_soc_register_card(card); + if (ret) { + dev_err(&pdev->dev, "snd_soc_register_card failed\n"); + goto err_set_audio; + } + + return 0; + +err_set_audio: + atmel_ssc_put_audio(id); + return ret; +} + +static int atmel_asoc_wm8904_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink; + int id; + + id = of_alias_get_id((struct device_node *)dailink->cpu_of_node, "ssc"); + + snd_soc_unregister_card(card); + atmel_ssc_put_audio(id); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id atmel_asoc_wm8904_dt_ids[] = { + { .compatible = "atmel,asoc-wm8904", }, + { } +}; +#endif + +static struct platform_driver atmel_asoc_wm8904_driver = { + .driver = { + .name = "atmel-wm8904-audio", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(atmel_asoc_wm8904_dt_ids), + }, + .probe = atmel_asoc_wm8904_probe, + .remove = atmel_asoc_wm8904_remove, +}; + +module_platform_driver(atmel_asoc_wm8904_driver); + +/* Module information */ +MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); +MODULE_DESCRIPTION("ALSA SoC machine driver for Atmel EK with WM8904 codec"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c new file mode 100644 index 00000000000..992ae38d5a1 --- /dev/null +++ b/sound/soc/atmel/sam9x5_wm8731.c @@ -0,0 +1,208 @@ +/* + * sam9x5_wm8731 -- SoC audio for AT91SAM9X5-based boards + * that are using WM8731 as codec. + * + * Copyright (C) 2011 Atmel, + * Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Copyright (C) 2013 Paratronic, + * Richard Genoud <richard.genoud@gmail.com> + * + * Based on sam9g20_wm8731.c by: + * Sedji Gaouaou <sedji.gaouaou@atmel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/of.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_device.h> +#include <linux/device.h> + +#include <sound/soc.h> +#include <sound/soc-dai.h> +#include <sound/soc-dapm.h> + +#include "../codecs/wm8731.h" +#include "atmel_ssc_dai.h" + + +#define MCLK_RATE 12288000 + +#define DRV_NAME "sam9x5-snd-wm8731" + +struct sam9x5_drvdata { + int ssc_id; +}; + +/* + * Logic for a wm8731 as connected on a at91sam9x5ek based board. + */ +static int sam9x5_wm8731_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct device *dev = rtd->dev; + int ret; + + dev_dbg(dev, "ASoC: %s called\n", __func__); + + /* set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL, + MCLK_RATE, SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(dev, "ASoC: Failed to set WM8731 SYSCLK: %d\n", ret); + return ret; + } + + return 0; +} + +/* + * Audio paths on at91sam9x5ek board: + * + * |A| ------------> | | ---R----> Headphone Jack + * |T| <----\ | WM | ---L--/ + * |9| ---> CLK <--> | 8731 | <--R----- Line In Jack + * |1| <------------ | | <--L--/ + */ +static const struct snd_soc_dapm_widget sam9x5_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_LINE("Line In Jack", NULL), +}; + +static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *codec_np, *cpu_np; + struct snd_soc_card *card; + struct snd_soc_dai_link *dai; + struct sam9x5_drvdata *priv; + int ret; + + if (!np) { + dev_err(&pdev->dev, "No device node supplied\n"); + return -EINVAL; + } + + card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL); + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + dai = devm_kzalloc(&pdev->dev, sizeof(*dai), GFP_KERNEL); + if (!dai || !card || !priv) { + ret = -ENOMEM; + goto out; + } + + card->dev = &pdev->dev; + card->owner = THIS_MODULE; + card->dai_link = dai; + card->num_links = 1; + card->dapm_widgets = sam9x5_dapm_widgets; + card->num_dapm_widgets = ARRAY_SIZE(sam9x5_dapm_widgets); + dai->name = "WM8731"; + dai->stream_name = "WM8731 PCM"; + dai->codec_dai_name = "wm8731-hifi"; + dai->init = sam9x5_wm8731_init; + dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM; + + ret = snd_soc_of_parse_card_name(card, "atmel,model"); + if (ret) { + dev_err(&pdev->dev, "atmel,model node missing\n"); + goto out; + } + + ret = snd_soc_of_parse_audio_routing(card, "atmel,audio-routing"); + if (ret) { + dev_err(&pdev->dev, "atmel,audio-routing node missing\n"); + goto out; + } + + codec_np = of_parse_phandle(np, "atmel,audio-codec", 0); + if (!codec_np) { + dev_err(&pdev->dev, "atmel,audio-codec node missing\n"); + ret = -EINVAL; + goto out; + } + + dai->codec_of_node = codec_np; + + cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0); + if (!cpu_np) { + dev_err(&pdev->dev, "atmel,ssc-controller node missing\n"); + ret = -EINVAL; + goto out; + } + dai->cpu_of_node = cpu_np; + dai->platform_of_node = cpu_np; + + priv->ssc_id = of_alias_get_id(cpu_np, "ssc"); + + ret = atmel_ssc_set_audio(priv->ssc_id); + if (ret != 0) { + dev_err(&pdev->dev, + "ASoC: Failed to set SSC %d for audio: %d\n", + ret, priv->ssc_id); + goto out; + } + + of_node_put(codec_np); + of_node_put(cpu_np); + + platform_set_drvdata(pdev, card); + + ret = snd_soc_register_card(card); + if (ret) { + dev_err(&pdev->dev, + "ASoC: Platform device allocation failed\n"); + goto out_put_audio; + } + + dev_dbg(&pdev->dev, "ASoC: %s ok\n", __func__); + + return ret; + +out_put_audio: + atmel_ssc_put_audio(priv->ssc_id); +out: + return ret; +} + +static int sam9x5_wm8731_driver_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + struct sam9x5_drvdata *priv = card->drvdata; + + snd_soc_unregister_card(card); + atmel_ssc_put_audio(priv->ssc_id); + + return 0; +} + +static const struct of_device_id sam9x5_wm8731_of_match[] = { + { .compatible = "atmel,sam9x5-wm8731-audio", }, + {}, +}; +MODULE_DEVICE_TABLE(of, sam9x5_wm8731_of_match); + +static struct platform_driver sam9x5_wm8731_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sam9x5_wm8731_of_match), + }, + .probe = sam9x5_wm8731_driver_probe, + .remove = sam9x5_wm8731_driver_remove, +}; +module_platform_driver(sam9x5_wm8731_driver); + +/* Module information */ +MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>"); +MODULE_AUTHOR("Richard Genoud <richard.genoud@gmail.com>"); +MODULE_DESCRIPTION("ALSA SoC machine driver for AT91SAM9x5 - WM8731"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); |