16 files changed, 206 insertions, 34 deletions
diff --git a/tools/perf/Documentation/perf-annotate.txt b/tools/perf/Documentation/perf-annotate.txt
index c9dcade0683..5164a655c39 100644
--- a/tools/perf/Documentation/perf-annotate.txt
+++ b/tools/perf/Documentation/perf-annotate.txt
@@ -1,5 +1,5 @@
 perf-annotate(1)
-==============
+================
 
 NAME
 ----
diff --git a/tools/perf/Documentation/perf-bench.txt b/tools/perf/Documentation/perf-bench.txt
index ae525ac5a2c..a3dbadb26ef 100644
--- a/tools/perf/Documentation/perf-bench.txt
+++ b/tools/perf/Documentation/perf-bench.txt
@@ -1,5 +1,5 @@
 perf-bench(1)
-============
+=============
 
 NAME
 ----
@@ -19,12 +19,12 @@ COMMON OPTIONS
 -f::
 --format=::
 Specify format style.
-Current available format styles are,
+Current available format styles are:
 
 'default'::
 Default style. This is mainly for human reading.
 ---------------------
-% perf bench sched pipe                      # with no style specify
+% perf bench sched pipe                      # with no style specified
 (executing 1000000 pipe operations between two tasks)
         Total time:5.855 sec
                 5.855061 usecs/op
@@ -79,7 +79,7 @@ options (20 sender and receiver processes per group)
 
       Total time:0.308 sec
 
-% perf bench sched messaging -t -g 20        # be multi-thread,with 20 groups
+% perf bench sched messaging -t -g 20        # be multi-thread, with 20 groups
 (20 sender and receiver threads per group)
 (20 groups == 800 threads run)
 
diff --git a/tools/perf/Documentation/perf-buildid-cache.txt b/tools/perf/Documentation/perf-buildid-cache.txt
index 88bc3b51974..5d1a9500277 100644
--- a/tools/perf/Documentation/perf-buildid-cache.txt
+++ b/tools/perf/Documentation/perf-buildid-cache.txt
@@ -8,7 +8,7 @@ perf-buildid-cache - Manage build-id cache.
 SYNOPSIS
 --------
 [verse]
-'perf buildid-list <options>'
+'perf buildid-cache <options>'
 
 DESCRIPTION
 -----------
@@ -30,4 +30,4 @@ OPTIONS
 
 SEE ALSO
 --------
-linkperf:perf-record[1], linkperf:perf-report[1]
+linkperf:perf-record[1], linkperf:perf-report[1], linkperf:perf-buildid-list[1]
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index 8974e208cba..20d97d84ea1 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -1,5 +1,5 @@
 perf-diff(1)
-==============
+============
 
 NAME
 ----
diff --git a/tools/perf/Documentation/perf-inject.txt b/tools/perf/Documentation/perf-inject.txt
new file mode 100644
index 00000000000..025630d43cd
--- /dev/null
+++ b/tools/perf/Documentation/perf-inject.txt
@@ -0,0 +1,35 @@
+perf-inject(1)
+==============
+
+NAME
+----
+perf-inject - Filter to augment the events stream with additional information
+
+SYNOPSIS
+--------
+[verse]
+'perf inject <options>'
+
+DESCRIPTION
+-----------
+perf-inject reads a perf-record event stream and repipes it to stdout.  At any
+point the processing code can inject other events into the event stream - in
+this case build-ids (-b option) are read and injected as needed into the event
+stream.
+
+Build-ids are just the first user of perf-inject - potentially anything that
+needs userspace processing to augment the events stream with additional
+information could make use of this facility.
+
+OPTIONS
+-------
+-b::
+--build-ids=::
+        Inject build-ids into the output stream
+-v::
+--verbose::
+	Be more verbose.
+
+SEE ALSO
+--------
+linkperf:perf-record[1], linkperf:perf-report[1], linkperf:perf-archive[1]
diff --git a/tools/perf/Documentation/perf-kmem.txt b/tools/perf/Documentation/perf-kmem.txt
index eac4d852e7c..a52fcde894c 100644
--- a/tools/perf/Documentation/perf-kmem.txt
+++ b/tools/perf/Documentation/perf-kmem.txt
@@ -1,5 +1,5 @@
 perf-kmem(1)
-==============
+============
 
 NAME
 ----
diff --git a/tools/perf/Documentation/perf-kvm.txt b/tools/perf/Documentation/perf-kvm.txt
new file mode 100644
index 00000000000..d004e19fe6d
--- /dev/null
+++ b/tools/perf/Documentation/perf-kvm.txt
@@ -0,0 +1,68 @@
+perf-kvm(1)
+===========
+
+NAME
+----
+perf-kvm - Tool to trace/measure kvm guest os
+
+SYNOPSIS
+--------
+[verse]
+'perf kvm' [--host] [--guest] [--guestmount=<path>
+	[--guestkallsyms=<path> --guestmodules=<path> | --guestvmlinux=<path>]]
+	{top|record|report|diff|buildid-list}
+'perf kvm' [--host] [--guest] [--guestkallsyms=<path> --guestmodules=<path>
+	| --guestvmlinux=<path>] {top|record|report|diff|buildid-list}
+
+DESCRIPTION
+-----------
+There are a couple of variants of perf kvm:
+
+  'perf kvm [options] top <command>' to generates and displays
+  a performance counter profile of guest os in realtime
+  of an arbitrary workload.
+
+  'perf kvm record <command>' to record the performance couinter profile
+  of an arbitrary workload and save it into a perf data file. If both
+  --host and --guest are input, the perf data file name is perf.data.kvm.
+  If there is  no --host but --guest, the file name is perf.data.guest.
+  If there is no --guest but --host, the file name is perf.data.host.
+
+  'perf kvm report' to display the performance counter profile information
+  recorded via perf kvm record.
+
+  'perf kvm diff' to displays the performance difference amongst two perf.data
+  files captured via perf record.
+
+  'perf kvm buildid-list' to  display the buildids found in a perf data file,
+  so that other tools can be used to fetch packages with matching symbol tables
+  for use by perf report.
+
+OPTIONS
+-------
+--host=::
+        Collect host side performance profile.
+--guest=::
+        Collect guest side performance profile.
+--guestmount=<path>::
+	Guest os root file system mount directory. Users mounts guest os
+        root directories under <path> by a specific filesystem access method,
+	typically, sshfs. For example, start 2 guest os. The one's pid is 8888
+	and the other's is 9999.
+        #mkdir ~/guestmount; cd ~/guestmount
+        #sshfs -o allow_other,direct_io -p 5551 localhost:/ 8888/
+        #sshfs -o allow_other,direct_io -p 5552 localhost:/ 9999/
+        #perf kvm --host --guest --guestmount=~/guestmount top
+--guestkallsyms=<path>::
+        Guest os /proc/kallsyms file copy. 'perf' kvm' reads it to get guest
+	kernel symbols. Users copy it out from guest os.
+--guestmodules=<path>::
+	Guest os /proc/modules file copy. 'perf' kvm' reads it to get guest
+	kernel module information. Users copy it out from guest os.
+--guestvmlinux=<path>::
+	Guest os kernel vmlinux.
+
+SEE ALSO
+--------
+linkperf:perf-top[1], linkperf:perf-record[1], linkperf:perf-report[1],
+linkperf:perf-diff[1], linkperf:perf-buildid-list[1]
diff --git a/tools/perf/Documentation/perf-list.txt b/tools/perf/Documentation/perf-list.txt
index 8290b942266..43e3dd284b9 100644
--- a/tools/perf/Documentation/perf-list.txt
+++ b/tools/perf/Documentation/perf-list.txt
@@ -15,6 +15,35 @@ DESCRIPTION
 This command displays the symbolic event types which can be selected in the
 various perf commands with the -e option.
 
+RAW HARDWARE EVENT DESCRIPTOR
+-----------------------------
+Even when an event is not available in a symbolic form within perf right now,
+it can be encoded in a per processor specific way.
+
+For instance For x86 CPUs NNN represents the raw register encoding with the
+layout of IA32_PERFEVTSELx MSRs (see [Intel® 64 and IA-32 Architectures Software Developer's Manual Volume 3B: System Programming Guide] Figure 30-1 Layout
+of IA32_PERFEVTSELx MSRs) or AMD's PerfEvtSeln (see [AMD64 Architecture Programmer’s Manual Volume 2: System Programming], Page 344,
+Figure 13-7 Performance Event-Select Register (PerfEvtSeln)).
+
+Example:
+
+If the Intel docs for a QM720 Core i7 describe an event as:
+
+  Event  Umask  Event Mask
+  Num.   Value  Mnemonic    Description                        Comment
+
+  A8H      01H  LSD.UOPS    Counts the number of micro-ops     Use cmask=1 and
+                            delivered by loop stream detector  invert to count
+                                                               cycles
+
+raw encoding of 0x1A8 can be used:
+
+ perf stat -e r1a8 -a sleep 1
+ perf record -e r1a8 ...
+
+You should refer to the processor specific documentation for getting these
+details. Some of them are referenced in the SEE ALSO section below.
+
 OPTIONS
 -------
 None
@@ -22,4 +51,6 @@ None
 SEE ALSO
 --------
 linkperf:perf-stat[1], linkperf:perf-top[1],
-linkperf:perf-record[1]
+linkperf:perf-record[1],
+http://www.intel.com/Assets/PDF/manual/253669.pdf[Intel® 64 and IA-32 Architectures Software Developer's Manual Volume 3B: System Programming Guide],
+http://support.amd.com/us/Processor_TechDocs/24593.pdf[AMD64 Architecture Programmer’s Manual Volume 2: System Programming]
diff --git a/tools/perf/Documentation/perf-probe.txt b/tools/perf/Documentation/perf-probe.txt
index 34202b1be0b..94a258c96a4 100644
--- a/tools/perf/Documentation/perf-probe.txt
+++ b/tools/perf/Documentation/perf-probe.txt
@@ -57,6 +57,14 @@ OPTIONS
 --force::
 	Forcibly add events with existing name.
 
+-n::
+--dry-run::
+	Dry run. With this option, --add and --del doesn't execute actual
+	adding and removal operations.
+
+--max-probes::
+	Set the maximum number of probe points for an event. Default is 128.
+
 PROBE SYNTAX
 ------------
 Probe points are defined by following syntax.
@@ -74,13 +82,22 @@ Probe points are defined by following syntax.
 'EVENT' specifies the name of new event, if omitted, it will be set the name of the probed function. Currently, event group name is set as 'probe'.
 'FUNC' specifies a probed function name, and it may have one of the following options; '+OFFS' is the offset from function entry address in bytes, ':RLN' is the relative-line number from function entry line, and '%return' means that it probes function return. And ';PTN' means lazy matching pattern (see LAZY MATCHING). Note that ';PTN' must be the end of the probe point definition.  In addition, '@SRC' specifies a source file which has that function.
 It is also possible to specify a probe point by the source line number or lazy matching by using 'SRC:ALN' or 'SRC;PTN' syntax, where 'SRC' is the source file path, ':ALN' is the line number and ';PTN' is the lazy matching pattern.
-'ARG' specifies the arguments of this probe point. You can use the name of local variable, or kprobe-tracer argument format (e.g. $retval, %ax, etc).
+'ARG' specifies the arguments of this probe point, (see PROBE ARGUMENT).
+
+PROBE ARGUMENT
+--------------
+Each probe argument follows below syntax.
+
+ [NAME=]LOCALVAR|$retval|%REG|@SYMBOL[:TYPE]
+
+'NAME' specifies the name of this argument (optional). You can use the name of local variable, local data structure member (e.g. var->field, var.field2), or kprobe-tracer argument format (e.g. $retval, %ax, etc). Note that the name of this argument will be set as the last member name if you specify a local data structure member (e.g. field2 for 'var->field1.field2'.)
+'TYPE' casts the type of this argument (optional). If omitted, perf probe automatically set the type based on debuginfo.
 
 LINE SYNTAX
 -----------
 Line range is descripted by following syntax.
 
- "FUNC[:RLN[+NUM|:RLN2]]|SRC:ALN[+NUM|:ALN2]"
+ "FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]"
 
 FUNC specifies the function name of showing lines. 'RLN' is the start line
 number from function entry line, and 'RLN2' is the end line number. As same as
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
index fc46c0b40f6..34e255fc3e2 100644
--- a/tools/perf/Documentation/perf-record.txt
+++ b/tools/perf/Documentation/perf-record.txt
@@ -58,7 +58,7 @@ OPTIONS
 
 -f::
 --force::
-	Overwrite existing data file.
+	Overwrite existing data file. (deprecated)
 
 -c::
 --count=::
@@ -69,8 +69,8 @@ OPTIONS
 	Output file name.
 
 -i::
---inherit::
-	Child tasks inherit counters.
+--no-inherit::
+	Child tasks do not inherit counters.
 -F::
 --freq=::
 	Profile at this frequency.
@@ -101,7 +101,7 @@ OPTIONS
 
 -R::
 --raw-samples::
-Collect raw sample records from all opened counters (typically for tracepoint counters).
+Collect raw sample records from all opened counters (default for tracepoint counters).
 
 SEE ALSO
 --------
diff --git a/tools/perf/Documentation/perf-sched.txt b/tools/perf/Documentation/perf-sched.txt
index 1ce79198997..8417644a616 100644
--- a/tools/perf/Documentation/perf-sched.txt
+++ b/tools/perf/Documentation/perf-sched.txt
@@ -12,7 +12,7 @@ SYNOPSIS
 
 DESCRIPTION
 -----------
-There's four variants of perf sched:
+There are four variants of perf sched:
 
   'perf sched record <command>' to record the scheduling events
   of an arbitrary workload.
@@ -27,7 +27,7 @@ There's four variants of perf sched:
   via perf sched record. (this is done by starting up mockup threads
   that mimic the workload based on the events in the trace. These
   threads can then replay the timings (CPU runtime and sleep patterns)
-  of the workload as it occured when it was recorded - and can repeat
+  of the workload as it occurred when it was recorded - and can repeat
   it a number of times, measuring its performance.)
 
 OPTIONS
diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
index 484080dd5b6..909fa766fa1 100644
--- a/tools/perf/Documentation/perf-stat.txt
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -31,8 +31,8 @@ OPTIONS
 	 hexadecimal event descriptor.
 
 -i::
---inherit::
-        child tasks inherit counters
+--no-inherit::
+        child tasks do not inherit counters
 -p::
 --pid=<pid>::
         stat events on existing pid
@@ -43,6 +43,9 @@ OPTIONS
 -c::
         scale counter values
 
+-B::
+        print large numbers with thousands' separators according to locale
+
 EXAMPLES
 --------
 
diff --git a/tools/perf/Documentation/perf-test.txt b/tools/perf/Documentation/perf-test.txt
new file mode 100644
index 00000000000..1c4b5f5b7f7
--- /dev/null
+++ b/tools/perf/Documentation/perf-test.txt
@@ -0,0 +1,22 @@
+perf-test(1)
+============
+
+NAME
+----
+perf-test - Runs sanity tests.
+
+SYNOPSIS
+--------
+[verse]
+'perf test <options>'
+
+DESCRIPTION
+-----------
+This command does assorted sanity tests, initially thru linked routines but
+also will look for a directory with more tests in the form of scripts.
+
+OPTIONS
+-------
+-v::
+--verbose::
+	Be more verbose.
diff --git a/tools/perf/Documentation/perf-trace-perl.txt b/tools/perf/Documentation/perf-trace-perl.txt
index d729cee8d98..ee6525ee6d6 100644
--- a/tools/perf/Documentation/perf-trace-perl.txt
+++ b/tools/perf/Documentation/perf-trace-perl.txt
@@ -49,12 +49,10 @@ available as calls back into the perf executable (see below).
 As an example, the following perf record command can be used to record
 all sched_wakeup events in the system:
 
- # perf record -c 1 -f -a -M -R -e sched:sched_wakeup
+ # perf record -a -e sched:sched_wakeup
 
 Traces meant to be processed using a script should be recorded with
-the above options: -c 1 says to sample every event, -a to enable
-system-wide collection, -M to multiplex the output, and -R to collect
-raw samples.
+the above option: -a to enable system-wide collection.
 
 The format file for the sched_wakep event defines the following fields
 (see /sys/kernel/debug/tracing/events/sched/sched_wakeup/format):
diff --git a/tools/perf/Documentation/perf-trace-python.txt b/tools/perf/Documentation/perf-trace-python.txt
index a241aca7718..693be804dd3 100644
--- a/tools/perf/Documentation/perf-trace-python.txt
+++ b/tools/perf/Documentation/perf-trace-python.txt
@@ -1,5 +1,5 @@
 perf-trace-python(1)
-==================
+====================
 
 NAME
 ----
@@ -93,7 +93,7 @@ don't care how it exited, so we'll use 'perf record' to record only
 the sys_enter events:
 
 ----
-# perf record -c 1 -f -a -M -R -e raw_syscalls:sys_enter
+# perf record -a -e raw_syscalls:sys_enter
 
 ^C[ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 56.545 MB perf.data (~2470503 samples) ]
@@ -182,7 +182,7 @@ mean either that the record step recorded event types that it wasn't
 really interested in, or the script was run against a trace file that
 doesn't correspond to the script.
 
-The script generated by -g option option simply prints a line for each
+The script generated by -g option simply prints a line for each
 event found in the trace stream i.e. it basically just dumps the event
 and its parameter values to stdout.  The print_header() function is
 simply a utility function used for that purpose.  Let's rename the
@@ -359,7 +359,7 @@ your script:
 # cat kernel-source/tools/perf/scripts/python/bin/syscall-counts-record
 
 #!/bin/bash
-perf record -c 1 -f -a -M -R -e raw_syscalls:sys_enter
+perf record -a -e raw_syscalls:sys_enter
 ----
 
 The 'report' script is also a shell script with the same base name as
@@ -449,12 +449,10 @@ available as calls back into the perf executable (see below).
 As an example, the following perf record command can be used to record
 all sched_wakeup events in the system:
 
- # perf record -c 1 -f -a -M -R -e sched:sched_wakeup
+ # perf record -a -e sched:sched_wakeup
 
 Traces meant to be processed using a script should be recorded with
-the above options: -c 1 says to sample every event, -a to enable
-system-wide collection, -M to multiplex the output, and -R to collect
-raw samples.
+the above option: -a to enable system-wide collection.
 
 The format file for the sched_wakep event defines the following fields
 (see /sys/kernel/debug/tracing/events/sched/sched_wakeup/format):
@@ -584,7 +582,7 @@ files:
   flag_str(event_name, field_name, field_value) - returns the string represention corresponding to field_value for the flag field field_name of event event_name
   symbol_str(event_name, field_name, field_value) - returns the string represention corresponding to field_value for the symbolic field field_name of event event_name
 
-The *autodict* function returns a special special kind of Python
+The *autodict* function returns a special kind of Python
 dictionary that implements Perl's 'autovivifying' hashes in Python
 i.e. with autovivifying hashes, you can assign nested hash values
 without having to go to the trouble of creating intermediate levels if
diff --git a/tools/perf/Documentation/perf-trace.txt b/tools/perf/Documentation/perf-trace.txt
index 8879299cd9d..122ec9dc485 100644
--- a/tools/perf/Documentation/perf-trace.txt
+++ b/tools/perf/Documentation/perf-trace.txt
@@ -1,5 +1,5 @@
 perf-trace(1)
-==============
+=============
 
 NAME
 ----