summaryrefslogtreecommitdiffstats
path: root/tools/testing
diff options
context:
space:
mode:
Diffstat (limited to 'tools/testing')
-rwxr-xr-xtools/testing/ktest/ktest.pl158
-rw-r--r--tools/testing/ktest/sample.conf21
2 files changed, 147 insertions, 32 deletions
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 999eab1bc64..40631569a0f 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -18,6 +18,7 @@ $| = 1;
my %opt;
my %repeat_tests;
my %repeats;
+my %evals;
#default opts
my %default = (
@@ -25,6 +26,7 @@ my %default = (
"TEST_TYPE" => "build",
"BUILD_TYPE" => "randconfig",
"MAKE_CMD" => "make",
+ "CLOSE_CONSOLE_SIGNAL" => "INT",
"TIMEOUT" => 120,
"TMP_DIR" => "/tmp/ktest/\${MACHINE}",
"SLEEP_TIME" => 60, # sleep time between tests
@@ -39,6 +41,7 @@ my %default = (
"CLEAR_LOG" => 0,
"BISECT_MANUAL" => 0,
"BISECT_SKIP" => 1,
+ "BISECT_TRIES" => 1,
"MIN_CONFIG_TYPE" => "boot",
"SUCCESS_LINE" => "login:",
"DETECT_TRIPLE_FAULT" => 1,
@@ -137,6 +140,7 @@ my $bisect_bad_commit = "";
my $reverse_bisect;
my $bisect_manual;
my $bisect_skip;
+my $bisect_tries;
my $config_bisect_good;
my $bisect_ret_good;
my $bisect_ret_bad;
@@ -163,6 +167,7 @@ my $timeout;
my $booted_timeout;
my $detect_triplefault;
my $console;
+my $close_console_signal;
my $reboot_success_line;
my $success_line;
my $stop_after_success;
@@ -273,6 +278,7 @@ my %option_map = (
"IGNORE_ERRORS" => \$ignore_errors,
"BISECT_MANUAL" => \$bisect_manual,
"BISECT_SKIP" => \$bisect_skip,
+ "BISECT_TRIES" => \$bisect_tries,
"CONFIG_BISECT_GOOD" => \$config_bisect_good,
"BISECT_RET_GOOD" => \$bisect_ret_good,
"BISECT_RET_BAD" => \$bisect_ret_bad,
@@ -285,6 +291,7 @@ my %option_map = (
"TIMEOUT" => \$timeout,
"BOOTED_TIMEOUT" => \$booted_timeout,
"CONSOLE" => \$console,
+ "CLOSE_CONSOLE_SIGNAL" => \$close_console_signal,
"DETECT_TRIPLE_FAULT" => \$detect_triplefault,
"SUCCESS_LINE" => \$success_line,
"REBOOT_SUCCESS_LINE" => \$reboot_success_line,
@@ -445,6 +452,27 @@ $config_help{"REBOOT_SCRIPT"} = << "EOF"
EOF
;
+sub _logit {
+ if (defined($opt{"LOG_FILE"})) {
+ open(OUT, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}";
+ print OUT @_;
+ close(OUT);
+ }
+}
+
+sub logit {
+ if (defined($opt{"LOG_FILE"})) {
+ _logit @_;
+ } else {
+ print @_;
+ }
+}
+
+sub doprint {
+ print @_;
+ _logit @_;
+}
+
sub read_prompt {
my ($cancel, $prompt) = @_;
@@ -662,6 +690,22 @@ sub set_value {
}
}
+sub set_eval {
+ my ($lvalue, $rvalue, $name) = @_;
+
+ my $prvalue = process_variables($rvalue);
+ my $arr;
+
+ if (defined($evals{$lvalue})) {
+ $arr = $evals{$lvalue};
+ } else {
+ $arr = [];
+ $evals{$lvalue} = $arr;
+ }
+
+ push @{$arr}, $rvalue;
+}
+
sub set_variable {
my ($lvalue, $rvalue) = @_;
@@ -947,6 +991,20 @@ sub __read_config {
$test_case = 1;
}
+ } elsif (/^\s*([A-Z_\[\]\d]+)\s*=~\s*(.*?)\s*$/) {
+
+ next if ($skip);
+
+ my $lvalue = $1;
+ my $rvalue = $2;
+
+ if ($default || $lvalue =~ /\[\d+\]$/) {
+ set_eval($lvalue, $rvalue, $name);
+ } else {
+ my $val = "$lvalue\[$test_num\]";
+ set_eval($val, $rvalue, $name);
+ }
+
} elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) {
next if ($skip);
@@ -1126,6 +1184,10 @@ sub __eval_option {
} elsif (defined($opt{$var})) {
$o = $opt{$var};
$retval = "$retval$o";
+ } elsif ($var eq "KERNEL_VERSION" && defined($make)) {
+ # special option KERNEL_VERSION uses kernel version
+ get_version();
+ $retval = "$retval$version";
} else {
$retval = "$retval\$\{$var\}";
}
@@ -1140,6 +1202,33 @@ sub __eval_option {
return $retval;
}
+sub process_evals {
+ my ($name, $option, $i) = @_;
+
+ my $option_name = "$name\[$i\]";
+ my $ev;
+
+ my $old_option = $option;
+
+ if (defined($evals{$option_name})) {
+ $ev = $evals{$option_name};
+ } elsif (defined($evals{$name})) {
+ $ev = $evals{$name};
+ } else {
+ return $option;
+ }
+
+ for my $e (@{$ev}) {
+ eval "\$option =~ $e";
+ }
+
+ if ($option ne $old_option) {
+ doprint("$name changed from '$old_option' to '$option'\n");
+ }
+
+ return $option;
+}
+
sub eval_option {
my ($name, $option, $i) = @_;
@@ -1160,28 +1249,9 @@ sub eval_option {
$option = __eval_option($name, $option, $i);
}
- return $option;
-}
+ $option = process_evals($name, $option, $i);
-sub _logit {
- if (defined($opt{"LOG_FILE"})) {
- open(OUT, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}";
- print OUT @_;
- close(OUT);
- }
-}
-
-sub logit {
- if (defined($opt{"LOG_FILE"})) {
- _logit @_;
- } else {
- print @_;
- }
-}
-
-sub doprint {
- print @_;
- _logit @_;
+ return $option;
}
sub run_command;
@@ -1296,7 +1366,7 @@ sub close_console {
my ($fp, $pid) = @_;
doprint "kill child process $pid\n";
- kill 2, $pid;
+ kill $close_console_signal, $pid;
print "closing!\n";
close($fp);
@@ -2517,12 +2587,29 @@ sub run_bisect {
$buildtype = "useconfig:$minconfig";
}
- my $ret = run_bisect_test $type, $buildtype;
+ # If the user sets bisect_tries to less than 1, then no tries
+ # is a success.
+ my $ret = 1;
- if ($bisect_manual) {
+ # Still let the user manually decide that though.
+ if ($bisect_tries < 1 && $bisect_manual) {
$ret = answer_bisect;
}
+ for (my $i = 0; $i < $bisect_tries; $i++) {
+ if ($bisect_tries > 1) {
+ my $t = $i + 1;
+ doprint("Running bisect trial $t of $bisect_tries:\n");
+ }
+ $ret = run_bisect_test $type, $buildtype;
+
+ if ($bisect_manual) {
+ $ret = answer_bisect;
+ }
+
+ last if (!$ret);
+ }
+
# Are we looking for where it worked, not failed?
if ($reverse_bisect && $ret >= 0) {
$ret = !$ret;
@@ -3916,6 +4003,18 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
my $makecmd = set_test_option("MAKE_CMD", $i);
+ $outputdir = set_test_option("OUTPUT_DIR", $i);
+ $builddir = set_test_option("BUILD_DIR", $i);
+
+ chdir $builddir || die "can't change directory to $builddir";
+
+ if (!-d $outputdir) {
+ mkpath($outputdir) or
+ die "can't create $outputdir";
+ }
+
+ $make = "$makecmd O=$outputdir";
+
# Load all the options into their mapped variable names
foreach my $opt (keys %option_map) {
${$option_map{$opt}} = set_test_option($opt, $i);
@@ -3940,13 +4039,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$start_minconfig = $minconfig;
}
- chdir $builddir || die "can't change directory to $builddir";
-
- foreach my $dir ($tmpdir, $outputdir) {
- if (!-d $dir) {
- mkpath($dir) or
- die "can't create $dir";
- }
+ if (!-d $tmpdir) {
+ mkpath($tmpdir) or
+ die "can't create $tmpdir";
}
$ENV{"SSH_USER"} = $ssh_user;
@@ -3955,7 +4050,6 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$buildlog = "$tmpdir/buildlog-$machine";
$testlog = "$tmpdir/testlog-$machine";
$dmesg = "$tmpdir/dmesg-$machine";
- $make = "$makecmd O=$outputdir";
$output_config = "$outputdir/.config";
if (!$buildonly) {
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index 0a290fb4cd5..172eec4517f 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -328,6 +328,13 @@
# For a virtual machine with guest name "Guest".
#CONSOLE = virsh console Guest
+# Signal to send to kill console.
+# ktest.pl will create a child process to monitor the console.
+# When the console is finished, ktest will kill the child process
+# with this signal.
+# (default INT)
+#CLOSE_CONSOLE_SIGNAL = HUP
+
# Required version ending to differentiate the test
# from other linux builds on the system.
#LOCALVERSION = -test
@@ -1021,6 +1028,20 @@
# BISECT_BAD with BISECT_CHECK = good or
# BISECT_CHECK = bad, respectively.
#
+# BISECT_TRIES = 5 (optional, default 1)
+#
+# For those cases that it takes several tries to hit a bug,
+# the BISECT_TRIES is useful. It is the number of times the
+# test is ran before it says the kernel is good. The first failure
+# will stop trying and mark the current SHA1 as bad.
+#
+# Note, as with all race bugs, there's no guarantee that if
+# it succeeds, it is really a good bisect. But it helps in case
+# the bug is some what reliable.
+#
+# You can set BISECT_TRIES to zero, and all tests will be considered
+# good, unless you also set BISECT_MANUAL.
+#
# BISECT_RET_GOOD = 0 (optional, default undefined)
#
# In case the specificed test returns something other than just