summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-12-17Makefile: Unexport LC_ALL instead of clearing itH. Peter Anvin
Apparently not all versions of glibc and utilities treat an empty LC_ALL as nonexistent, causing error messages to be garbled. Instead, explicitly unexport it from the environment. Reported-and-tested-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <4B2AC394.4030108@redhat.com> Cc: Michal Marek <mmarek@sues.cz> Cc: Roland Dreier <rdreier@cisco.com> Cc: Sam Ravnborg <sam@ravnborg.org>
2009-12-17x86: Fix objdump version check in arch/x86/tools/chkobjdump.awkakpm@linux-foundation.org
It says Warning: objdump version is older than 2.19 Warning: Skipping posttest. because it used the wrong field from `objdump -v': akpm:/usr/src/25> /opt/crosstool/gcc-4.0.2-glibc-2.3.6/x86_64-unknown-linux-gnu/bin/x86_64-unknown-linux-gnu-objdump -v GNU objdump 2.16.1 Copyright 2005 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License. This program has absolutely no warranty. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <200912172326.nBHNQaQl024796@imap1.linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Masami Hiramatsu <mhiramat@redhat.com>
2009-12-17x86: Reenable TSC sync check at boot, even with NONSTOP_TSCPallipadi, Venkatesh
Commit 83ce4009 did the following change If the TSC is constant and non-stop, also set it reliable. But, there seems to be few systems that will end up with TSC warp across sockets, depending on how the cpus come out of reset. Skipping TSC sync test on such systems may result in time inconsistency later. So, reenable TSC sync test even on constant and non-stop TSC systems. Set, sched_clock_stable to 1 by default and reset it in mark_tsc_unstable, if TSC sync fails. This change still gives perf benefit mentioned in 83ce4009 for systems where TSC is reliable. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20091217202702.GA18015@linux-os.sc.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-17x86: Don't use POSIX character classes in gen-insn-attr-x86.awkRoland Dreier
Not all awk implementations (including the default awk in Ubuntu 9.10) support POSIX character classes. Since x86-opcode-map.txt is plain ASCII, we can just use explicit ranges for lower case, alphabetic, and alphanumeric characters instead. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> LKML-Reference: <adabphy750b.fsf@roland-alpha.cisco.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-17Makefile: set LC_CTYPE, LC_COLLATE, LC_NUMERIC to CH. Peter Anvin
There are a number of common Unix constructs like character ranges in grep/sed/awk which don't work as expected with LC_COLLATE set to other than C. Similarly, set LC_CTYPE and LC_NUMERIC to C to avoid other nasty surprises. In order to make sure these actually take effect we also have to clear LC_ALL. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Michal Marek <mmarek@sues.cz> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Roland Dreier <rdreier@cisco.com> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <4B2A1761.4070904@suse.cz>
2009-12-16x86: Increase MAX_EARLY_RES; insufficient on 32-bit NUMAYinghai Lu
Due to recent changes wakeup and mptable, we run out of early reservations on 32-bit NUMA. Thus, adjust the available number. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4B22D754.2020706@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-16x86: Fix checking of SRAT when node 0 ram is not from 0Yinghai Lu
Found one system that boot from socket1 instead of socket0, SRAT get rejected... [ 0.000000] SRAT: Node 1 PXM 0 0-a0000 [ 0.000000] SRAT: Node 1 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 1 PXM 0 100000000-2080000000 [ 0.000000] SRAT: Node 0 PXM 1 2080000000-4080000000 [ 0.000000] SRAT: Node 2 PXM 2 4080000000-6080000000 [ 0.000000] SRAT: Node 3 PXM 3 6080000000-8080000000 [ 0.000000] SRAT: Node 4 PXM 4 8080000000-a080000000 [ 0.000000] SRAT: Node 5 PXM 5 a080000000-c080000000 [ 0.000000] SRAT: Node 6 PXM 6 c080000000-e080000000 [ 0.000000] SRAT: Node 7 PXM 7 e080000000-10080000000 ... [ 0.000000] NUMA: Allocated memnodemap from 500000 - 701040 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Adding active range (0, 0x2080000, 0x4080000) 0 entries of 3200 used [ 0.000000] Adding active range (1, 0x0, 0x96) 1 entries of 3200 used [ 0.000000] Adding active range (1, 0x100, 0x7f750) 2 entries of 3200 used [ 0.000000] Adding active range (1, 0x100000, 0x2080000) 3 entries of 3200 used [ 0.000000] Adding active range (2, 0x4080000, 0x6080000) 4 entries of 3200 used [ 0.000000] Adding active range (3, 0x6080000, 0x8080000) 5 entries of 3200 used [ 0.000000] Adding active range (4, 0x8080000, 0xa080000) 6 entries of 3200 used [ 0.000000] Adding active range (5, 0xa080000, 0xc080000) 7 entries of 3200 used [ 0.000000] Adding active range (6, 0xc080000, 0xe080000) 8 entries of 3200 used [ 0.000000] Adding active range (7, 0xe080000, 0x10080000) 9 entries of 3200 used [ 0.000000] SRAT: PXMs only cover 917504MB of your 1048566MB e820 RAM. Not used. [ 0.000000] SRAT: SRAT not used. the early_node_map is not sorted because node0 with non zero start come first. so try to sort it right away after all regions are registered. also fixs refression by 8716273c (x86: Export srat physical topology) -v2: make it more solid to handle cross node case like node0 [0,4g), [8,12g) and node1 [4g, 8g), [12g, 16g) -v3: update comments. Reported-and-tested-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4B2579D2.3010201@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-16x86, cpuid: Add "volatile" to asm in native_cpuid()Suresh Siddha
xsave_cntxt_init() does something like: cpuid(0xd, ..); // find out what features FP/SSE/.. etc are supported xsetbv(); // enable the features known to OS cpuid(0xd, ..); // find out the size of the context for features enabled Depending on what features get enabled in xsetbv(), value of the cpuid.eax=0xd.ecx=0.ebx changes correspondingly (representing the size of the context that is enabled). As we don't have volatile keyword for native_cpuid(), gcc 4.1.2 optimizes away the second cpuid and the kernel continues to use the cpuid information obtained before xsetbv(), ultimately leading to kernel crash on processors supporting more state than the legacy FP/SSE. Add "volatile" for native_cpuid(). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1261009542.2745.55.camel@sbs-t61.sc.intel.com> Cc: stable@kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-16x86, msr: msrs_alloc/free for CONFIG_SMP=nBorislav Petkov
Randy Dunlap reported the following build error: "When CONFIG_SMP=n, CONFIG_X86_MSR=m: ERROR: "msrs_free" [drivers/edac/amd64_edac_mod.ko] undefined! ERROR: "msrs_alloc" [drivers/edac/amd64_edac_mod.ko] undefined!" This is due to the fact that <arch/x86/lib/msr.c> is conditioned on CONFIG_SMP and in the UP case we have only the stubs in the header. Fork off SMP functionality into a new file (msr-smp.c) and build msrs_{alloc,free} unconditionally. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> LKML-Reference: <20091216231625.GD27228@liondog.tnic> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-16x86, amd: Get multi-node CPU info from NodeId MSR instead of PCI config spaceAndreas Herrmann
Use NodeId MSR to get NodeId and number of nodes per processor. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20091216144355.GB28798@alberich.amd.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-16x86: Add IA32_TSC_AUX MSR and use itSheng Yang
Clean up write_tsc() and write_tscp_aux() by replacing hardcoded values. No change in functionality. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> LKML-Reference: <1260942485-19156-4-git-send-email-sheng@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-15x86, msr/cpuid: Register enough minors for the MSR and CPUID driversH. Peter Anvin
register_chrdev() hardcodes registering 256 minors, presumably to avoid breaking old drivers. However, we need to register enough minors so that we have all possible CPUs. checkpatch warns on this patch, but the patch is correct: NR_CPUS here is a static *upper bound* on the *maximum CPU index* (not *number of CPUs!*) and that is what we want. Reported-and-tested-by: Russ Anderson <rja@sgi.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <tip-*@git.kernel.org>
2009-12-15initramfs: add missing decompressor error checkPhillip Lougher
The decompressors return error by calling a supplied error function, and/or by returning an error return value. The initramfs code, however, fails to check the exit code returned by the decompressor, and only checks the error status set by calling the error function. This patch adds a return code check and calls the error function. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk> LKML-Reference: <4b26b1ef.0+ZWxT6886olqcSc%phillip@lougher.demon.co.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-15bzip2: Add missing checks for malloc returning NULLPhillip Lougher
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk> LKML-Reference: <4b26b1ef.ln20bM9Mn4gzB21L%phillip@lougher.demon.co.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-15bzip2/lzma/gzip: pre-boot malloc doesn't return NULL on failurePhillip Lougher
The trivial malloc implementation used in the pre-boot environment by the decompressors returns a bad pointer on failure (falling through after calling error). This is doubly wrong - the callers expect malloc to return NULL on failure, second the error function is intended to be used by the decompressors to propagate errors to *their* callers. The decompressors have no access to any state set by the error function. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk> LKML-Reference: <4b26b1ef.hIInb2AYPMtImAJO%phillip@lougher.demon.co.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-15x86: Fix kprobes build with non-gawk awkJonathan Nieder
The instruction attribute table generator fails when run by mawk or original-awk: $ mawk -f arch/x86/tools/gen-insn-attr-x86.awk \ arch/x86/lib/x86-opcode-map.txt > /dev/null Semantic error at 240: Second IMM error $ echo $? 1 Line 240 contains "c8: ENTER Iw,Ib", which indicates that this instruction has two immediate operands, the second of which is one byte. The script loops through the immediate operands using a for loop. Unfortunately, there is no guarantee in awk that a for (variable in array) loop will return the indices in increasing order. Internally, both original-awk and mawk iterate over a hash table for this purpose, and both implementations happen to produce the index 2 before 1. The supposed second immediate operand is more than one byte wide, producing the error. So loop over the indices in increasing order instead. As a side-effect, with mawk this means the silly two-entry hash table never has to be built. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by Masami Hiramatsu <mhiramat@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091213220437.GA27718@progeny.tock> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-15Merge branch 'x86/mce' into x86/urgentIngo Molnar
Merge reason: Leftover mini-topic from the merge window - merge it. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-15Merge branch 'x86/asm' into x86/urgentIngo Molnar
Merge reason: it's stable so lets push it upstream. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-15x86: Split swiotlb initialization into two stagesFUJITA Tomonori
The commit f4780ca005404166cc40af77ef0e86132ab98a81 moves swiotlb initialization before dma32_free_bootmem(). It's supposed to fix a bug that the commit 75f1cdf1dda92cae037ec848ae63690d91913eac introduced, we initialize SWIOTLB right after dma32_free_bootmem so we wrongly steal memory area allocated for GART with broken BIOS earlier. However, the above commit introduced another problem, which likely breaks machines with huge amount of memory. Such a box use the majority of DMA32_ZONE so there is no memory for swiotlb. With this patch, the x86 IOMMU initialization sequence are: 1. We set swiotlb to 1 in the case of (max_pfn > MAX_DMA32_PFN && !no_iommu). If swiotlb usage is forced by the boot option, we go to the step 3 and finish (we don't try to detect IOMMUs). 2. We call the detection functions of all the IOMMUs. The detection function sets x86_init.iommu.iommu_init to the IOMMU initialization function (so we can avoid calling the initialization functions of all the IOMMUs needlessly). 3. We initialize swiotlb (and set dma_ops to swiotlb_dma_ops) if swiotlb is set to 1. 4. If the IOMMU initialization function doesn't need swiotlb (e.g. the initialization is sucessful) then sets swiotlb to zero. 5. If we find that swiotlb is set to zero, we free swiotlb resource. Reported-by: Yinghai Lu <yinghai@kernel.org> Reported-by: Roland Dreier <rdreier@cisco.com> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> LKML-Reference: <20091215204729A.fujita.tomonori@lab.ntt.co.jp> Tested-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-14x86: Regex support and known-movable symbols for relocs, fix _endH. Peter Anvin
This adds a new category of symbols to the relocs program: symbols which are known to be relative, even though the linker emits them as absolute; this is the case for symbols that live in the linker script, which currently applies to _end. Unfortunately the previous workaround of putting _end in its own empty section was defeated by newer binutils, which remove empty sections completely. This patch also changes the symbol matching to use regular expressions instead of hardcoded C for specific patterns. This is a decidedly non-minimal patch: a modified version of the relocs program is used as part of the Syslinux build, and this is basically a backport to Linux of some of those changes; they have thus been well tested. Signed-off-by: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <4AF86211.3070103@zytor.com> Acked-by: Michal Marek <mmarek@suse.cz> Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
2009-12-14x86, msr: Remove incorrect, duplicated code in the MSR driverH. Peter Anvin
The MSR driver would compute the values for cpu and c at declaration, and then again in the body of the function. This isn't merely redundant, but unsafe, since cpu might not refer to a valid CPU at that point. Remove the unnecessary and dangerous references in the declarations. This code now matches the equivalent code in the CPUID driver. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-14x86, mce: Clean up thermal init by introducing intel_thermal_supported()Hidetoshi Seto
It looks better to have a common function. No change in functionality. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> LKML-Reference: <4B25FDDC.407@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Cyrill Gorcunov <gorcunov@openvz.org>
2009-12-14x86, mce: Thermal monitoring depends on APIC being enabledCyrill Gorcunov
Add check if APIC is not disabled since thermal monitoring depends on it. As only apic gets disabled we should not try to install "thermal monitor" vector, print out that thermal monitoring is enabled and etc... Note that "Intel Correct Machine Check Interrupts" already has such a check. Also I decided to not add cpu_has_apic check into mcheck_intel_therm_init since even if it'll call apic_read on disabled apic -- it's safe here and allow us to save a few code bytes. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> LKML-Reference: <4B25FDC2.3020401@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-14x86: Gart: fix breakage due to IOMMU initialization cleanupYinghai Lu
This fixes the following breakage of the commit 75f1cdf1dda92cae037ec848ae63690d91913eac: - GART systems that don't AGP with broken BIOS and more than 4GB memory are forced to use swiotlb. They can allocate aperture by hand and use GART. - GART systems without GAP must disable GART on shutdown. - swiotlb usage is forced by the boot option, gart_iommu_hole_init() is not called, so we disable GART early_gart_iommu_check(). Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> LKML-Reference: <1260759135-6450-3-git-send-email-fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-14x86: Move swiotlb initialization before dma32_free_bootmemFUJITA Tomonori
The commit 75f1cdf1dda92cae037ec848ae63690d91913eac introduced a bug that we initialize SWIOTLB right after dma32_free_bootmem so we wrongly steal memory area allocated for GART with broken BIOS earlier. This moves swiotlb initialization before dma32_free_bootmem(). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: yinghai@kernel.org LKML-Reference: <1260759135-6450-2-git-send-email-fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-14x86: Fix build warning in arch/x86/mm/mmio-mod.cJoe Perches
Stephen Rothwell reported these warnings: arch/x86/mm/mmio-mod.c: In function 'print_pte': arch/x86/mm/mmio-mod.c:100: warning: too many arguments for format arch/x86/mm/mmio-mod.c:106: warning: too many arguments for format The 'fmt' was left out accidentally. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Joe Perches <joe@perches.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus <torvalds@linux-foundation.org> LKML-Reference: <1260775443.18538.16.camel@Joe-Laptop.home> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-14x86: Remove usedac in feature-removal-schedule.txtFUJITA Tomonori
The reason of removal, "replaced by allowdac and no dac combination" is incorrect. There is no way to do the same thing with "allowdac" and "nodac" combination. The usedac option enables us to stop via_no_dac() setting forbid_dac to 1. That is, someone who uses VIA bridges can use DAC with this option even if some of VIA bridges seem to be broken about DAC. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: WANG Cong <amwang@redhat.com> Cc: gcosta@redhat.com LKML-Reference: <20091214104423X.fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-13x86: Fix duplicated UV BAU interrupt vectorCliff Wickman
Interrupt vector 0xec has been doubly defined in irq_vectors.h It seems arbitrary whether LOCAL_PENDING_VECTOR or UV_BAU_MESSAGE is the higher number. As long as they are unique. If they are not unique we'll hit a BUG in alloc_system_vector(). Signed-off-by: Cliff Wickman <cpw@sgi.com> Cc: <stable@kernel.org> LKML-Reference: <E1NJ9Pe-0004P7-0Q@eag09.americas.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-11nvram: Fix write beyond end condition; prove to gcc copy is safeH. Peter Anvin
In nvram_write, first of all, correctly handle the case where the file pointer is already beyond the end; we should return EOF in that case. Second, make the logic a bit more explicit so that gcc can statically prove that the copy_from_user() is safe. Once the condition of the beyond-end filepointer is eliminated, the copy is safe but gcc can't prove it, causing build failures for i386 allyesconfig. Third, eliminate the entirely superfluous variable "len", and just use the passed-in variable "count" instead. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <tip-*@git.kernel.org>
2009-12-11mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safeH. Peter Anvin
Slightly adjust the logic for determining the size of the copy_form_user() in do_pages_stat(); with this change, gcc can see that the copying is safe. Without this, we get a build error for i386 allyesconfig: /home/hpa/kernel/linux-2.6-tip.urgent/arch/x86/include/asm/uaccess_32.h:213: error: call to ‘copy_from_user_overflow’ declared with attribute error: copy_from_user() buffer size is not provably correct Unlike an earlier patch from Arjan, this doesn't introduce new variables; merely reshuffles the compare so that gcc can see that an overflow cannot happen. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Brice Goglin <Brice.Goglin@inria.fr> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> LKML-Reference: <20090926205406.30d55b08@infradead.org>
2009-12-11x86: Limit the number of processor bootup messagesMike Travis
When there are a large number of processors in a system, there is an excessive amount of messages sent to the system console. It's estimated that with 4096 processors in a system, and the console baudrate set to 56K, the startup messages will take about 84 minutes to clear the serial port. This set of patches limits the number of repetitious messages which contain no additional information. Much of this information is obtainable from the /proc and /sysfs. Some of the messages are also sent to the kernel log buffer as KERN_DEBUG messages so dmesg can be used to examine more closely any details specific to a problem. The new cpu bootup sequence for system_state == SYSTEM_BOOTING: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok. Booting Node 1, Processors #8 #9 #10 #11 #12 #13 #14 #15 Ok. ... Booting Node 3, Processors #56 #57 #58 #59 #60 #61 #62 #63 Ok. Brought up 64 CPUs After the system is running, a single line boot message is displayed when CPU's are hotplugged on: Booting Node %d Processor %d APIC 0x%x Status of the following lines: CPU: Physical Processor ID: printed once (for boot cpu) CPU: Processor Core ID: printed once (for boot cpu) CPU: Hyper-Threading is disabled printed once (for boot cpu) CPU: Thermal monitoring enabled printed once (for boot cpu) CPU %d/0x%x -> Node %d: removed CPU %d is now offline: only if system_state == RUNNING Initializing CPU#%d: KERN_DEBUG Signed-off-by: Mike Travis <travis@sgi.com> LKML-Reference: <4B219E28.8080601@sgi.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-11x86: Remove enabling x2apic message for every CPUMike Travis
Print only once that the system is supporting x2apic mode. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> LKML-Reference: <4B226E92.5080904@sgi.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-11doc: Add documentation for bootloader_{type,version}H. Peter Anvin
Add documentation for kernel/bootloader_type and kernel/bootloader_version to sysctl/kernel.txt. This should really have been done a long time ago. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Shen Feng <shen@cn.fujitsu.com>
2009-12-11x86, msr: Add support for non-contiguous cpumasksBorislav Petkov
The current rd/wrmsr_on_cpus helpers assume that the supplied cpumasks are contiguous. However, there are machines out there like some K8 multinode Opterons which have a non-contiguous core enumeration on each node (e.g. cores 0,2 on node 0 instead of 0,1), see http://www.gossamer-threads.com/lists/linux/kernel/1160268. This patch fixes out-of-bounds writes (see URL above) by adding per-CPU msr structs which are used on the respective cores. Additionally, two helpers, msrs_{alloc,free}, are provided for use by the callers of the MSR accessors. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20091211171440.GD31998@aftab> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-11Merge commit 'linus/master' into x86/urgentH. Peter Anvin
2009-12-11x86: Use find_e820() instead of hard coded trampoline addressYinghai Lu
Jens found the following crash/regression: [ 0.000000] found SMP MP-table at [ffff8800000fdd80] fdd80 [ 0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 0-fff BIOS data page and [ 0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 6000-7fff TRAMPOLINE and bisected it to b24c2a9 ("x86: Move find_smp_config() earlier and avoid bootmem usage"). It turns out the BIOS is using the first 64k for mptable, without reserving it. So try to find good range for the real-mode trampoline instead of hard coding it, in case some bios tries to use that range for sth. Reported-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Tested-by: Jens Axboe <jens.axboe@oracle.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <4B21630A.6000308@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-10Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (189 commits) drm/radeon/kms: fix warning about cur_placement being uninitialised. drm/ttm: Print debug information on memory manager when eviction fails drm: Add memory manager debug function drm/radeon/kms: restore surface registers on resume. drm/radeon/kms/r600/r700: fallback gracefully on ucode failure drm/ttm: Initialize eviction placement in case the driver callback doesn't drm/radeon/kms: cleanup structure and module if initialization fails drm/radeon/kms: actualy set the eviction placements we choose drm/radeon/kms: Fix NULL ptr dereference drm/radeon/kms/avivo: add support for new pll selection algo drm/radeon/kms/avivo: fix some bugs in the display bandwidth setup drm/radeon/kms: fix return value from fence function. drm/radeon: Remove tests for -ERESTART from the TTM code. drm/ttm: Have the TTM code return -ERESTARTSYS instead of -ERESTART. drm/radeon/kms: Convert radeon to new TTM validation API (V2) drm/ttm: Rework validation & memory space allocation (V3) drm: Add search/get functions to get a block in a specific range drm/radeon/kms: fix avivo tiling regression since radeon object rework drm/i915: Remove a debugging printk from hangcheck drm/radeon/kms: make sure i2c id matches ...
2009-12-10Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (21 commits) amd64_edac: bump driver version amd64_edac: fix use-uninitialised bug amd64_edac: correct sys address to chip select mapping amd64_edac: add a leaner syndrome decoding algorithm amd64_edac: remove early hw support check amd64_edac: detect DDR3 memory type edac: add memory types strings for debugging edac, mce: update AMD F10h revD check amd64_edac: remove unneeded extract_error_address wrapper amd64_edac: rename StinkyIdentifier amd64_edac: remove superfluous dbg printk amd64_edac: enhance address to DRAM bank mapping amd64_edac: cleanup f10_early_channel_count amd64_edac: dump DIMM sizes on K8 too amd64_edac: cleanup rest of amd64_dump_misc_regs amd64_edac: cleanup DRAM cfg low debug output amd64_edac: wrap-up pci config read error handling amd64_edac: unify MCGCTL ECC switching cpumask: use modern cpumask style in drivers/edac/amd64_edac.c amd64_edac: make DRAM regions output more human-readable ...
2009-12-10Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: MAINTAINERS: Add OMAP2/3 DSS and OMAPFB maintainer OMAP: SDP: Enable DSS2 for OMAP3 SDP board OMAP: DSS2: Taal DSI command mode panel driver OMAP: DSS2: Add generic and Sharp panel drivers OMAP: DSS2: omapfb driver OMAP: DSS2: DSI driver OMAP: DSS2: SDI driver OMAP: DSS2: RFBI driver OMAP: DSS2: Video encoder driver OMAP: DSS2: DPI driver OMAP: DSS2: DISPC OMAP: DSS2: Add more core files OMAP: DSS2: Display Subsystem Driver core OMAP: DSS2: Documentation for DSS2 OMAP: Add support for VRFB rotation engine OMAP: Add VRAM manager OMAP: OMAPFB: add omapdss device OMAP: OMAPFB: split omapfb.h OMAP2: Add funcs for writing SMS_ROT_* registers
2009-12-10x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasksPrarit Bhargava
The per_cpu cpuid4_info shared_map can contain stale data when CPUs are added and removed. The stale data can lead to a NULL pointer derefernce panic on a remove of a CPU that has had siblings previously removed. This patch resolves the panic by verifying a cpu is actually online before adding it to the shared_cpu_map, only examining cpus that are part of the same lower level cache, and by updating other siblings lowest level cache maps when a cpu is added. Signed-off-by: Prarit Bhargava <prarit@redhat.com> LKML-Reference: <20091209183336.17855.98708.sendpatchset@prarit.bos.redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-10x86: Merge kernel_thread()Brian Gerst
Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1260380084-3707-6-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-10x86: Sync 32/64-bit kernel_threadBrian Gerst
Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1260380084-3707-5-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-10x86, 32-bit: Use same regs as 64-bit for kernel_thread_helperBrian Gerst
The arg should be in %eax, but that is clobbered by the return value of clone. The function pointer can be in any register. Also, don't push args onto the stack, since regparm(3) is the normal calling convention now. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1260380084-3707-4-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-10x86, 64-bit: Use user_mode() to determine new stack pointer in copy_thread()Brian Gerst
Use user_mode() instead of a magic value for sp to determine when returning to kernel mode. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1260380084-3707-3-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-10x86, 64-bit: Move kernel_thread to CBrian Gerst
Prepare for merging with 32-bit. Signed-off-by: Brian Gerst <brgerst@gmail.com> LKML-Reference: <1260380084-3707-2-git-send-email-brgerst@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-10Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Add debugobjects support
2009-12-10Merge branch 'bugfix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: try harder to balloon up under memory pressure. Xen balloon: fix totalram_pages counting. xen: explicitly create/destroy stop_machine workqueues outside suspend/resume region. xen: improve error handling in do_suspend. xen: don't leak IRQs over suspend/resume. xen: call clock resume notifier on all CPUs xen: use iret for return from 64b kernel to 32b usermode xen: don't call dpm_resume_noirq() with interrupts disabled. xen: register runstate info for boot CPU early xen: register runstate on secondary CPUs xen: register timer interrupt with IRQF_TIMER xen: correctly restore pfn_to_mfn_list_list after resume xen: restore runstate_info even if !have_vcpu_info_placement xen: re-register runstate area earlier on resume. xen: wait up to 5 minutes for device connetion xen: improvement to wait_for_devices() xen: fix is_disconnected_device/exists_disconnected_device xen/xenbus: make DEVICE_ATTR()s static
2009-12-10Merge branch 'xen/fbdev' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'xen/fbdev' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen pvfb: Inhibit VM_IO flag to be set on vmalloc-ed framebuffers. fb-defio: Inhibit VM_IO flag to be set on vmalloc-ed framebuffers. fb-defio: If FBINFO_VIRTFB is defined, do not set VM_IO flag. Fix toogle whether xenbus driver should be built as module or part of kernel.
2009-12-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: always use GFP_NOFS
2009-12-10Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (47 commits) ext4: Fix potential fiemap deadlock (mmap_sem vs. i_data_sem) ext4: Do not override ext2 or ext3 if built they are built as modules jbd2: Export jbd2_log_start_commit to fix ext4 build ext4: Fix insufficient checks in EXT4_IOC_MOVE_EXT ext4: Wait for proper transaction commit on fsync ext4: fix incorrect block reservation on quota transfer. ext4: quota macros cleanup ext4: ext4_get_reserved_space() must return bytes instead of blocks ext4: remove blocks from inode prealloc list on failure ext4: wait for log to commit when umounting ext4: Avoid data / filesystem corruption when write fails to copy data ext4: Use ext4 file system driver for ext2/ext3 file system mounts ext4: Return the PTR_ERR of the correct pointer in setup_new_group_blocks() jbd2: Add ENOMEM checking in and for jbd2_journal_write_metadata_buffer() ext4: remove unused parameter wbc from __ext4_journalled_writepage() ext4: remove encountered_congestion trace ext4: move_extent_per_page() cleanup ext4: initialize moved_len before calling ext4_move_extents() ext4: Fix double-free of blocks with EXT4_IOC_MOVE_EXT ext4: use ext4_data_block_valid() in ext4_free_blocks() ...
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-19 12:34:44 +0000