summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2008-12-21powerpc/mm: Introduce MMU featuresBenjamin Herrenschmidt
We're soon running out of CPU features and I need to add some new ones for various MMU related bits, so this patch separates the MMU features from the CPU features. I moved over the 32-bit MMU related ones, added base features for MMU type families, but didn't move over any 64-bit only feature yet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/mm: Rework context management for CPUs with no hash tableBenjamin Herrenschmidt
This reworks the context management code used by 4xx,8xx and freescale BookE. It adds support for SMP by implementing a concept of stale context map to lazily flush the TLB on processors where a context may have been invalidated. This also contains the ground work for generalizing such lazy TLB flushing by just picking up a new PID and marking the old one stale. This will be implemented later. This is a first implementation that uses a global spinlock. Ideally, we should try to get at least the fast path (context ID already assigned) lockless or limited to a per context lock, but for now this will do. I tried to keep the UP case reasonably simple to avoid adding too much overhead to 8xx which does a lot of context stealing since it effectively has only 16 PIDs available. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/mm: Split mmu_context handlingBenjamin Herrenschmidt
This splits the mmu_context handling between 32-bit hash based processors, 64-bit hash based processors and everybody else. This is preliminary work for adding SMP support for BookE processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/4xx: Extended DCR support v2Benjamin Herrenschmidt
This adds supports to the "extended" DCR addressing via the indirect mfdcrx/mtdcrx instructions supported by some 4xx cores (440H6 and later). I enabled the feature for now only on AMCC 460 chips. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Add reboot notifier to Collaborative Memory ManagerBrian King
When running Active Memory Sharing, pages can get marked as "loaned" with the hypervisor by the CMM driver. This state gets cleared by the system firmware when rebooting the partition. When using kexec to boot a new kernel, this state never gets cleared and the hypervisor and CMM driver can get out of sync with respect to the number of pages currently marked "loaned". Fix this by adding a reboot notifier to the CMM driver to deflate the balloon and mark all pages as active. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Disable Collaborative Memory Manager for kdumpBrian King
When running Active Memory Sharing, the Collaborative Memory Manager (CMM) may mark some pages as "loaned" with the hypervisor. Periodically, the CMM will query the hypervisor for a loan request, which is a single signed value. When kexec'ing into a kdump kernel, the CMM driver in the kdump kernel is not aware of the pages the previous kernel had marked as "loaned", so the hypervisor and the CMM driver are out of sync. This results in the CMM driver getting a negative loan request, which can then get treated as a large unsigned value and can cause kdump to hang due to the CMM driver inflating too large. Since there really is no clean way for the CMM driver in the kdump kernel to clean this up, simply disable CMM in the kdump kernel. This fixes hangs we were seeing doing kdump with AMS. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/iseries: viodasd needs to depend on CONFIG_BLOCKStephen Rothwell
Otherwise you get lot of errors like these: drivers/block/viodasd.c:72: error: dereferencing pointer to incomplete type drivers/block/viodasd.c: In function 'viodasd_open': drivers/block/viodasd.c:135: error: dereferencing pointer to incomplete type drivers/block/viodasd.c: In function 'viodasd_release': drivers/block/viodasd.c:184: error: dereferencing pointer to incomplete type drivers/block/viodasd.c: In function 'viodasd_getgeo': drivers/block/viodasd.c:209: error: dereferencing pointer to incomplete type drivers/block/viodasd.c:214: error: implicit declaration of function 'get_capacity' drivers/block/viodasd.c: At top level: drivers/block/viodasd.c:222: error: variable 'viodasd_fops' has initializer but incomplete type drivers/block/viodasd.c:223: error: unknown field 'owner' specified in initializer Discovered by a randconfig build. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21hvc_console: Escape magic sysrq keyHendrik Brueckner
The ctrl-o (^O) is a common control key used by several applications, such as vim, but hvc_console uses ^O as the magic-sysrq key. This commit allows users to send ^O to applications by pressing ^O twice in succession. To implement this, this commit introduces a check if ^O is pressed again if the sysrq_pressed variable is already set. In this case, clear sysrq_pressed state and flip the ^O character to the tty. (The old behavior has always set "sysrq_pressed" if ^O has been entered, and it has not flipped the ^O character to the tty.) Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Pass a valid token to rtas_call() in phyp-dump codeTony Breeds
ibm_configure_kernel_dump is passed as the token to rtas_call() is never initialised. This sets it to something sane. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Acked-by: Nathan Lynch <ntl@pobox.com> Acked-by: Manish Ahuja <mahujam@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Protect against NULL pointer deref in phyp-dump codeTony Breeds
print_dump_header() will be called at least once with a NULL pointer in a normal boot sequence. If DEBUG is defined then we will dereference the pointer and crash. Add a quick fix to exit early in the NULL pointer case. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Acked-by: Manish Ahuja <mahujam@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Rename struct vm_region to avoid conflict with NOMMUDavid Howells
Rename PowerPC's struct vm_region so that I can introduce my own global version for NOMMU. It's feasible that the PowerPC version may wish to use my global one instead. The NOMMU vm_region struct defines areas of the physical memory map that are under mmap. This may include chunks of RAM or regions of memory mapped devices, such as flash. It is also used to retain copies of file content so that shareable private memory mappings of files can be made. As such, it may be compatible with what is described in the banner comment for PowerPC's vm_region struct. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Convert sysfs cache code to of_find_next_cache_node()Nathan Lynch
Using the common code means that more complete cache information will provided in sysfs on platforms that don't use the l2-cache property convention. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Convert cpu_to_l2cache() to of_find_next_cache_node()Nathan Lynch
The smp code uses cache information to populate cpu_core_map; change it to use common code for cache lookup. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc: Add of_find_next_cache_node()Nathan Lynch
We have more than one piece of code that looks up cache nodes manually using the "l2-cache" property. Add a common helper routine which does this and handles ePAPR's "next-level-cache" property as well as powermac. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21of/gpio: Implement of_gpio_count()Anton Vorontsov
This function is used to count how many GPIOs are specified for a device node. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21of: of_parse_phandles_with_args() learns to differentiate 'hole' cellsAnton Vorontsov
Given this list (contains three gpio specifiers, one of which is a hole): gpios = <&phandle1 1 2 3 0 /* a hole */ &phandle2 4 5 6>; of_parse_phandles_with_args() would report -ENOENT for the `hole' specifier item, the same error value is used to report the end of the list, for example. Sometimes we want to differentiate holes from real errors -- for example when we want to count all the [syntax correct] specifiers. With this patch of_parse_phandles_with_args() will report -EEXITS when somebody requested to parse a hole. Also, make the out_{node,args} arguments optional, when counting we don't really need the out values. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21of: Minor simplification for the of_parse_phandles_with_args()Anton Vorontsov
By using 'list++' in the beginning we can simplify the code a little bit. Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-18Merge branch 'linux-2.6' into nextPaul Mackerras
2008-12-17Merge branch 'i2c-fixes' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds
* 'i2c-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c-s3c2410: fix check for being in suspend. i2c-cpm: Detect and report NAK right away instead of timing out
2008-12-17Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: Add JBD2 compat feature bit. ocfs2: Always update xattr search when creating bucket.
2008-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole display USB: set correct configuration in probe of ti_usb_3410_5052 USB: add 5372:2303 to pl2303 USB: skip Set-Interface(0) if already in altsetting 0 USB: fix comment about endianness of descriptors USB: Documentation/usb/gadget_serial.txt: update to match driver use_acm behaviour usbmon: drop bogus 0t from usbmon.txt USB: gadget: fix rndis working at high speed USB: ftdi_sio: Adding Ewert Energy System's CANdapter PID USB: tty: SprogII DCC controller identifiers usb-storage: update unusual_devs entry for Nokia 5310 USB: Unusual devs patch for Nokia 3500c USB: storage: unusual_devs.h: Nokia 3109c addition USB: fix problem with usbtmc driver not loading properly
2008-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: STAGING: Move staging drivers back to staging-specific menu driver core: add newlines to debugging enabled/disabled messages xilinx_hwicap: remove improper wording in license statement driver core: fix using 'ret' variable in unregister_dynamic_debug_module
2008-12-17cifs: fix buffer overrun in parse_DFS_referralsJeff Layton
While testing a kernel with memory poisoning enabled, I saw some warnings about the redzone getting clobbered when chasing DFS referrals. The buffer allocation for the unicode converted version of the searchName is too small and needs to take null termination into account. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-17Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc: Fix corruption error in rh_alloc_fixed() powerpc/fsl-booke: Fix the miss interrupt restore
2008-12-17STAGING: Move staging drivers back to staging-specific menuDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17driver core: add newlines to debugging enabled/disabled messagesMarcel Holtmann
Both messages are missing the newline and thus dmesg output gets scrambled. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17xilinx_hwicap: remove improper wording in license statementGreg Kroah-Hartman
GPLv2 doesn't allow additional restrictions to be imposed on any code, so this wording needs to be removed from these files. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17driver core: fix using 'ret' variable in unregister_dynamic_debug_moduleJohann Felix Soden
The 'ret' variable is assigned, but not used in the return statement. Fix this. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole displayMike Provencher
Add id for the Hewlett-Packard LD220-HP POS pole display. Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard Signed-off-by: Mike Provencher <mike.provencher@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: set correct configuration in probe of ti_usb_3410_5052Oliver Neukum
This driver transfers firmware. It may just as well set the correct configuration. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: add 5372:2303 to pl2303Matthew Arnold
This patch adds the "Superial" USB-Serial converter to pl2303 so that it is detected, by the correct driver. Adds the relevant vendor:product (5372:2303) to the device tables in pl2303.c & pl2303.h. The patch has been tested against 2.6.24-22-generic. Signed-off-by: Matthew D Arnold <matthew.arnold-1@uts.edu.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: skip Set-Interface(0) if already in altsetting 0Alan Stern
When a driver unbinds from an interface, usbcore always sends a Set-Interface request to reinstall altsetting 0. Unforunately, quite a few devices have buggy firmware that crashes when it receives this request. To avoid such problems, this patch (as1180) arranges to send the Set-Interface request only when the interface is not already in altsetting 0. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: fix comment about endianness of descriptorsPhil Endecott
This patch fixes a comment and clarifies the documentation about the endianness of descriptors. The current policy is that descriptors will be little-endian at the API even on big-endian systems; however the /proc/bus/usb API predates this policy and presents descriptors with some multibyte fields byte-swapped. Signed-off-by: Phil Endecott <usb_endian_patch@chezphil.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: Documentation/usb/gadget_serial.txt: update to match driver use_acm ↵Peter Korsgaard
behaviour Commit 7bb5ea54 (usb gadget serial: use composite gadget framework) changed the default for the use_acm parameter from 0 to 1. Update the documentation to match. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17usbmon: drop bogus 0t from usbmon.txtPete Zaitcev
The example is incorrect: there is no 0t socket (the '1t' format has no bus number in it). Also, correct the broken sentence for USB Tag. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: gadget: fix rndis working at high speedDavid Brownell
Fix a bug specific to highspeed mode in the recently updated RNDIS support: it wasn't setting up the high speed notification endpoint, which prevented high speed RNDIS links from working. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Tested-by: Anand Gadiyar <gadiyar@ti.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: ftdi_sio: Adding Ewert Energy System's CANdapter PIDAndrew Ewert
The following patch adds in the USB PID for Ewert Energy System's CANdapter device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio device driver. The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu. Relevant output from /proc/bus/usb/devices (With patch installed): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=9f80 Rev= 6.00 S: Manufacturer=Ewert Energy Systems S: Product=CANdapter S: SerialNumber=A6RGB3Z3 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: Andrew Ewert <andrew@ewertenergy.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: tty: SprogII DCC controller identifiersAlan Cox
Someone on rmweb reminded me this had been overlooked from ages ago.. Add the identifiers for the Sprog II USB. This is a DCC control interface using the FTDI-SIO hardware: http://www.sprog-dcc.co.uk/. People have been using it with insmod options for ages, this just puts it into the driver data. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17usb-storage: update unusual_devs entry for Nokia 5310Alan Stern
This patch (as1179) updates the unusual_devs entry for Nokia's 5310 phone to include a more recent firmware revision. This fixes Bugzilla #12099. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Robson Roberto Souza Peixoto <robsonpeixoto@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: Unusual devs patch for Nokia 3500cOzan Sener
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0060 Rev= 5.51 S: Manufacturer=Nokia S: Product=Nokia 3500c S: SerialNumber=357687010280751 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: Ozan Sener <themgzzy@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: storage: unusual_devs.h: Nokia 3109c additionCSÉCSY László
2.6.26(.x, cannot remember) could handle the microSD card in my Nokia 3109c attached via USB as mass storage, 2.6.27(.x, up to and included 2.6.27.8) cannot. Please find the attached patch which fixes this regression, and a copy of /proc/bus/usb/devices with my phone plugged in running with this patch on Frugalware. T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0063 Rev= 6.01 S: Manufacturer=Nokia S: Product=Nokia 3109c S: SerialNumber=359561013742570 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: CSÉCSY László <boobaa@frugalware.org> Cc: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: fix problem with usbtmc driver not loading properlyGreg Kroah-Hartman
The usbtmc driver forgot to export its device table to userspace. Without this, it is never loaded properly when such a device is seen by the system. Cc: Marcel Janssen <marcel.janssen@admesy.nl> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17powerpc: Fix corruption error in rh_alloc_fixed()Guillaume Knispel
There is an error in rh_alloc_fixed() of the Remote Heap code: If there is at least one free block blk won't be NULL at the end of the search loop, so -ENOMEM won't be returned and the else branch of "if (bs == s || be == e)" will be taken, corrupting the management structures. Signed-off-by: Guillaume Knispel <gknispel@proformatique.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-17powerpc/fsl-booke: Fix the miss interrupt restoreDave Liu
The commit e5e774d8833de1a0037be2384efccadf16935675 powerpc/fsl-booke: Fix problem with _tlbil_va being interrupted introduce one issue. that casue the problem like this: Kernel BUG at c00b19fc [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] MPC8572 DS Modules linked in: NIP: c00b19fc LR: c00b1c34 CTR: c0064e88 REGS: ef02b7b0 TRAP: 0700 Not tainted (2.6.28-rc8-00057-g1bda712) MSR: 00021000 <ME> CR: 44048028 XER: 20000000 TASK = ef02c000[1] 'init' THREAD: ef02a000 GPR00: 00000001 ef02b860 ef02c000 eec201a0 c0dec2c0 00000000 000078a1 00000400 GPR08: c00b4e40 000078a1 c048ec00 a1780000 44048028 ecd26917 00000001 ef02b948 GPR16: ffffffea 0000020c 00000000 00000000 00000003 0000000a 00000000 000078a1 GPR24: eec201a0 00000000 ed849000 00000400 ef02b95c 00000001 ef02b978 ef02b984 NIP [c00b19fc] __find_get_block+0x24/0x238 LR [c00b1c34] __getblk+0x24/0x2a0 Call Trace: [ef02b860] [c017b768] generic_make_request+0x290/0x328 (unreliable) [ef02b8b0] [c00b1c34] __getblk+0x24/0x2a0 [ef02b910] [c00b4ae4] __bread+0x14/0xf8 [ef02b920] [c00fc228] ext2_get_branch+0xf0/0x138 [ef02b940] [c00fcc88] ext2_get_block+0xb8/0x828 [ef02ba00] [c00bbdc8] do_mpage_readpage+0x188/0x808 [ef02bac0] [c00bc5b4] mpage_readpages+0xec/0x144 [ef02bb50] [c00fba38] ext2_readpages+0x24/0x34 [ef02bb60] [c006ade0] __do_page_cache_readahead+0x150/0x230 [ef02bbb0] [c0064bdc] filemap_fault+0x31c/0x3e0 [ef02bbf0] [c00728b8] __do_fault+0x60/0x5b0 [ef02bc50] [c0011e0c] do_page_fault+0x2d8/0x4c4 [ef02bd10] [c000ed90] handle_page_fault+0xc/0x80 [ef02bdd0] [c00c7adc] set_brk+0x74/0x9c [ef02bdf0] [c00c9274] load_elf_binary+0x70c/0x1180 [ef02be70] [c00945f0] search_binary_handler+0xa8/0x274 [ef02bea0] [c0095818] do_execve+0x19c/0x1d4 [ef02bed0] [c000766c] sys_execve+0x58/0x84 [ef02bef0] [c000e950] ret_from_syscall+0x0/0x3c [ef02bfb0] [c009c6fc] sys_dup+0x24/0x6c [ef02bfc0] [c0001e04] init_post+0xb0/0xf0 [ef02bfd0] [c046c1ac] kernel_init+0xcc/0xf4 [ef02bff0] [c000e6d0] kernel_thread+0x4c/0x68 Instruction dump: 4bffffa4 813f000c 4bffffac 9421ffb0 7c0802a6 7d800026 90010054 bf210034 91810030 7c0000a6 68008000 54008ffe <0f000000> 3d20c04e 3b29ffb8 38000008 The issue was the beqlr returns early but we haven't reenabled interrupts. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-16ocfs2: Add JBD2 compat feature bit.Joel Becker
Define the OCFS2_FEATURE_COMPAT_JBD2 bit in the filesystem header. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-12-17Merge branch 'next' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into next
2008-12-16ocfs2: Always update xattr search when creating bucket.Tao Ma
When we create xattr bucket during the process of xattr set, we always need to update the ocfs2_xattr_search since even if the bucket size is the same as block size, the offset will change because of the removal of the ocfs2_xattr_block header. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-12-16i2c-s3c2410: fix check for being in suspend.Ben Dooks
As noted by Julia Lawall <julia@diku.dk>, we can never trigger the check for being in suspend due to the result of !readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN always being 0. Add suspend/resume hooks to stop i2c transactions happening until the driver has been resumed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16i2c-cpm: Detect and report NAK right away instead of timing outMike Ditto
Make the driver report an ENXIO error immediately upon NAK instead of waiting for another interrupt and getting a timeout. When reading from a device that is not present or declines to respond to, e.g., a non-existent register address, CPM immediately reports a NAK condition in the TxBD, but the driver kept waiting until a timeout, which takes 1 second and causes an ugly console error message. Signed-off-by: Mike Ditto <mditto@consentry.com> Acked-by: Jochen Friedrich <jochen@scram.de> [ben-linux@fluff.org: reordered description text] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: add quirk fix for Freecom HDD
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-21 12:59:20 +0000