summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2006-02-07[MIPS] Oprofile: Support for 34K UP kernels.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Fix dump_tlb.c warning and cleanup.Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Fix minor sparse warningsAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] MIPS R2 optimized endianess swapping.Ralf Baechle
From Franck Bui-Huu <vagabon.xyz@gmail.com> with modifications by me. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Remove buggy inline version of memscan.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Sparse: Add some __user tags to signal functions.Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Shrink Qemu configuration to the bare minimum that is need and tested.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Support /proc/kcore for MIPSDaniel Jacobowitz
I'm pretty sure that the CKSEG0 bits are wrong, but I did need to cover that region - because the SB-1 kernel links at 0xffffffff80100000 or so, disassembly and printing static variables don't work unless the debugger can read that region. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] IP22: Fix serial console detectionRalf Baechle
From: Kaj-Michael Lang <milang@tal.org> In ip22-setup.c the checks for serial/graphics console logic does not check if ARCS console=g but the machine is using serial console, as it does if no keyboard is attached. This patch adds a check if ConsoleOut is serial. There might also be support for other graphics than Newport soon... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] ieee754[sd]p_neg workaroundAtsushi Nemoto
It looks glibc's pow() assumes an unary '-' operation for any number (including NaNs) always inverts its sign bit (though IEEE754 does not specify the sign bit for NaNs). This patch make the kernel math-emu emulates real MIPS neg.[ds] instruction. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Remove wrong __user tags.Atsushi Nemoto
This fixes sparse warnings 'dereference of noderef expression'. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Cleanup fls implementation.Ralf Baechle
fls was the only called of flz, so fold flz into fls, same for the __ilog2 call. Delete the now unused flz function. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] local_irq_restore wasn't safe to be used in other macros mode.Ralf Baechle
It always left the assembler in reorder mode possibly causing disaster. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Remove commented out code to add -mmad for Nevada.Ralf Baechle
Adding -mmad is not usable since over half a decade in gcc and when fixed the proper -march option values should enable the use of the mad, madu and mul instructions of the R5500, RM5200, RM7000 and RM9000 families. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Fix Cobalt PCI cache line sizesPeter Horton
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Sparse: Add _MIPS_SZINT and _MIPS_ISA to CHECKFLAGS to fix sparse ↵Atsushi Nemoto
warnings. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Build blast_cache routines from templateAtsushi Nemoto
Build blast_xxx, blast_xxx_page, blast_xxx_page_indexed from template. Easier to maintaina and saves 300 lines. Generated code should be unchanged. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Sparse: Fix some compiler/sparse warnings in ptrace32.cAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Reformat to 80 columns.Ralf Baechle
Patch courtesy of Emily Postnews ;-) Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Sibyte: Make all setup functions __init.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Get rid of CONFIG_SB1_PASS_1_WORKAROUNDS #ifdef crapola.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Au1200: Make KGDB compileSergei Shtylylov
AMD Au1200 SOC just doesn't have UART3, so KGDB won't even compile for it as is, here's the fix to make KGDB use UART1. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Au1xx0: really set KSEG0 to uncached on rebootSergei Shtylylov
Fix a really old buglet in AMD Au1xx0 restart code: instead of modifying the whole CP0 Config.K0 field to 010b (meaning KSEG0 uncached) before flushing the caches and resetting a board, it only sets bit 1 of that reg. which is effectively a NOP since Config.K0 == 011b as the kernel sets it up (which is also its default value for Au1xx0). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] TX49x7: Fix timer register #define'sSergei Shtylylov
Fix the #define's for TX4927/37 timer reg's to match the datasheets (those Signed-off-by: Konstantin Baydarov <kbaidarov@mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Bullet proof uaccess.h against 4.0.1 miss-compilation.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] SB1: Add oprofile support.Mark Mason
Signed-off-by: Mark Mason <mason@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] BCM1480: Cleanup debug code left behind in the PCI driver.Mark Mason
Signed-off-by: Mark Mason <mason@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] BCM1125 PCI fixesMark Mason
Make BCM1125 targets to link again. Signed-off-by: Mark Mason <mason@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Nevada support for SGI O2.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] CPU definitions for Cobalt.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Rename include/asm-mips/cobalt to include/asm-mips/mach-cobalt.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Rename _machine_power_off to pm_power_off so the kernel builds again.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Check function pointers are non-zero before calling.Ralf Baechle
Several boards don't initialize the pointers, so let's play safe. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Revert "mips: add pm_power_off"Ralf Baechle
pm_power_off duplicates the functionality of _machine_restart. This reverts b142159fa5ffbad73b6927fafa5440148030f3f1 commit.
2006-02-07[MIPS] RTLX compile fixes.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Get rid of unnecessary prototypes. Fixes and optimizations for HZ > 100.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Fix C version of ssnop to use the right opcode.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Remove stray .set mips3 resulting in 64-bit instruction in 32-bit ↵Ralf Baechle
kernels. Only the NMI handler was affected so this is a low impact bug. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[PATCH] powerpc: avoid timer interrupt replay effect when onlining cpuNathan Lynch
When a cpu is hotplug-onlined, if we don't set per_cpu(last_jiffy) to something sane, timer_interrupt will execute its while loop for every tick missed since the cpu was last online (or since the system was booted, if we're adding a new cpu). This can cause weird hangs, ssh sessions dropping, and we can even go xmon if we take a global IPI at the wrong time. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: hypervisor check in pseries_kexec_cpu_downMichael Neuling
We call unregister_vpa but we don't check to see if the hypervisor supports this. Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Anton Blanchard <anton@samba.org> -- arch/powerpc/platforms/pseries/setup.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] documentation/powerpc: add bus-frequency property to SOC nodeBecky Bruce
Updated SOC node definition in documentation to include bus-frequency property. Also extended mdio example to match specification. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Don't use toc in decrementer_iSeries_maskedMichael Ellerman
Since 404849bbd2bfd62e05b36f4753f6e1af6050a824 we've been using LOAD_REG_ADDRBASE, which uses the toc pointer, in decrementer_iSeries_masked. This can explode if we take the decrementer interrupt while we're in a module, because the toc pointer in r2 will be the module's toc pointer. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Cleanup, consolidating icache dirtying logicDavid Gibson
The code to mark a page as icache dirty (so that it will later be icache-dcache flushed when we try to execute from it) is duplicated in three places: flush_dcache_page() does this marking and nothing else, but clear_user_page() and copy_user_page() duplicate it, since those functions make the page icache dirty themselves. This patch makes those other functions call flush_dcache_page() instead, so the logic's all in one place. This will make life less confusing if we ever need to tweak the details of the the lazy icache flush mechanism. arch/powerpc/mm/mem.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] Don't check pointer for NULL before passing it to kfree ↵Jesper Juhl
[arch/powerpc/kernel/rtas_flash.c] Checking a pointer for NULL before passing it to kfree is pointless, kfree does its own NULL checking of input. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: fix compile warning in udbg_init_maple_realmodeOlaf Hering
arch/powerpc/kernel/udbg_16550.c: In function `udbg_init_maple_realmode': arch/powerpc/kernel/udbg_16550.c:162: warning: assignment from incompatible pointer type Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: add refcounting to setup_peg2 and of_get_pci_addressOlaf Hering
setup_peg2 must do some refcounting. of_get_pci_address may need to drop the node Pegasos l2cr : L2 cache was not active, activating PCI bus 0 controlled by pci at 80000000 Badness in kref_get at /home/olaf/kernel/olh/ppc64/linux-2.6.16-rc2-olh/lib/kref.c:32 Call Trace: [C037BD00] [C0007934] show_stack+0x5c/0x184 (unreliable) [C037BD30] [C000E068] program_check_exception+0x184/0x584 [C037BD90] [C000F5F0] ret_from_except_full+0x0/0x4c --- Exception: 700 at kref_get+0xc/0x24 LR = of_node_get+0x24/0x3c [C037BE50] [C004FD94] __pte_alloc_kernel+0x64/0x80 (unreliable) [C037BE70] [C000CA18] of_get_parent+0x34/0x58 [C037BE90] [C0009B18] of_get_address+0x24/0x174 [C037BED0] [C000A108] of_address_to_resource+0x24/0x68 [C037BF00] [C038B128] chrp_find_bridges+0x114/0x470 [C037BF90] [C038AE48] chrp_setup_arch+0x1fc/0x32c [C037BFB0] [C03849B0] setup_arch+0x144/0x188 [C037BFD0] [C037C45C] start_kernel+0x34/0x1a8 [C037BFF0] [000037A0] 0x37a0 Badness in kref_get at /home/olaf/kernel/olh/ppc64/linux-2.6.16-rc2-olh/lib/kref.c:32 Call Trace: [C037BC90] [C0007934] show_stack+0x5c/0x184 (unreliable) [C037BCC0] [C000E068] program_check_exception+0x184/0x584 [C037BD20] [C000F5F0] ret_from_except_full+0x0/0x4c --- Exception: 700 at kref_get+0xc/0x24 LR = of_node_get+0x24/0x3c [C037BDE0] [00000000] 0x0 (unreliable) [C037BE00] [C000CA18] of_get_parent+0x34/0x58 [C037BE20] [C0009CE8] of_translate_address+0x2c/0x2fc [C037BEA0] [C0009FE8] __of_address_to_resource+0x30/0xc4 [C037BED0] [C000A130] of_address_to_resource+0x4c/0x68 [C037BF00] [C038B128] chrp_find_bridges+0x114/0x470 [C037BF90] [C038AE48] chrp_setup_arch+0x1fc/0x32c [C037BFB0] [C03849B0] setup_arch+0x144/0x188 [C037BFD0] [C037C45C] start_kernel+0x34/0x1a8 [C037BFF0] [000037A0] 0x37a0 PCI bus 0 controlled by pci at c0000000 Top of RAM: 0x10000000, Total RAM: 0x10000000 Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: remove pointer/integer confusion in of_find_node_by_nameOlaf Hering
remove pointer/integer confusion Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: restore clock speed in /proc/cpuinfoOlaf Hering
Use generic_calibrate_decr to restore missing clock: speed in /proc/cpuinfo Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: remove pointer/integer confusion in generic_calibrate_decrOlaf Hering
remove pointer/integer confusion Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Don't overwrite flat device tree with kdump kernelMichael Ellerman
It's possible for prom_init to allocate the flat device tree inside the kdump crash kernel region. If this happens, when we load the kdump kernel we overwrite the flattened device tree, which is bad. We could make prom_init try and avoid allocating inside the crash kernel region, but then we run into issues if the crash kernel region uses all the space inside the RMO. The easiest solution is to move the flat device tree once we're running in the kernel. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 22:25:06 +0000