summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2006-12-12[CPUFREQ] speedstep-centrino should ignore upper performance control bitsGary Hade
On some systems there could be bits set in the upper half of the control value provided by the _PSS object. These bits are only relevant for cpufreq drivers that use IO ports which are not currently supported by the speedstep-centrino driver. The current MSR oriented code assumes that upper bits are not set and thus fails to work correctly when they are. e.g. the control and status value equality check failed on the IBM x3650 even though the ACPI spec allows inequality. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Dave Jones <davej@redhat.com>
2006-12-12[CPUFREQ] Optimize gx-suspmod revision ID fetchingJean Delvare
We don't need a temporary variable to get the PCI revision ID. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Jones <davej@redhat.com>
2006-12-12[IA64] kprobe clears qp bits for special instructionsbibo,mao
On IA64 there exists some special instructions which always need to be executed regradless of qp bits, such as com.crel.unc, tbit.trel.unc etc. This patch clears qp bits when inserting kprobe trap code and disables probepoint on slot 1 for these special instructions. Signed-off-by: bibo,mao <bibo.mao@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-12[IA64] enable trap code on slot 1Tony Luck
Because slot 1 of one instr bundle crosses border of two consecutive 8-bytes, kprobe on slot 1 is disabled. This patch enables kprobe on slot1, it only replaces higher 8-bytes of the instruction bundle and changes the exception code to ignore the low 12 bits of the break number (which is across the border in the lower 8-bytes of the bundle). For those instructions which must execute regardless qp bits, kprobe on slot 1 is still disabled. Signed-off-by: bibo,mao <bibo.mao@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-12[IA64] Take defensive stance on ia64_pal_get_brand_info()Tony Luck
Stephane thought he saw a problem here (but was just confused by the return value from ia64_pal_get_brand_info()). But we should be more defensive here in case an prototype PAL for a future processor doesn't implement this PAL call. Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-12RDMA/cma: Export rdma cm interface to userspaceSean Hefty
Export the rdma cm interfaces to userspace via a misc device. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Add support for RDMA_PS_UDPSean Hefty
Allow the use of UD QPs through the rdma_cm, in order to provide address translation services for resolving IB addresses for datagram messages using SIDR. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Allow early transition to RTS to handle lost CM messagesSean Hefty
During connection establishment, the passive side of a connection can receive messages from the active side before the connection event has been delivered to the user. Allow the passive side to send messages in response to received data before the event is delivered. To handle the case where the connection messages are lost, a new rdma_notify() function is added that users may invoke to force a connection into the established state. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Report connect info with connect eventsSean Hefty
Connection information was never given to the recipient of a connection request or reply message. Only the event was delivered. Report the connection data with the event to allows user to reject the connection based on the requested parameters, or adjust their resources to match the request. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/cma: Remove unneeded qp_type parameter from rdma_cmSean Hefty
The qp_type parameter into the rdma_cm is unneeded, and can be misleading. The QP type should be determined from the port space. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12IB/ipath: Fix IRQ for PCI Express HCAsRoland Dreier
Commit 51f65ebc ("IB/ipath - program intconfig register using new HT irq hook"), which fixed interrupts for HyperTransport HCAs, broke PCI Express HCAs, because for those HCAs, the driver uses the value of pdev->irq before pci_enable_msi() and ends up getting a totally bogus IRQ number. Fix this by using the value of pdev->irq after pci_enable_msi(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12RDMA/amso1100: Fix memory leak in c2_qp_modify()Krishna Kumar
vq_req is leaked in error cases. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12IB/iser: Remove unused "write-only" variablesRoland Dreier
Remove variables that are set but then never looked at in the iSER initiator. These cleanups came from David Binderman's list of "set but never used" warnings from icc. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12IB/ipath: Remove unused "write-only" variablesRoland Dreier
Remove variables that are set but then never looked at in the ipath driver. These cleanups came from David Binderman's list of "set but never used" warnings from icc. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12IB/fmr: ib_flush_fmr_pool() may wait too longRoland Dreier
ib_flush_fmr_pool() stashes away the request generation number properly, but then goes ahead and rereads it every time it tests whether the flush generation number has caught up. This means that there is a theoretical possibility of livelock, if the request generation number keeps getting bumped and the flush generation number never catches up. The fix is simple: use the request generation number read at the beginning of the function. Also, atomic_inc() followed by atomic_read() can be replaced with atomic_int_return(). There's no real requirement for atomicity here but we might as well shrink the code. This bug was discovered using David Binderman's list of "set but never used" warnings from icc. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-12-12[IA64] fix possible XPC deadlock when disconnectingDean Nelson
This patch eliminates a potential deadlock that is possible when XPC disconnects a channel to a partition that has gone down. This deadlock will occur if at least one of the kthreads created by XPC for the purpose of making callouts to the channel's registerer is detained in the registerer and will not be returning back to XPC until some registerer request occurs on the now downed partition. The potential for a deadlock is removed by ensuring that there always is a kthread available to make the channel disconnecting callout to the registerer. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-12[IA64] - Reduce overhead of FP exception logging messagesJack Steiner
Improve the scalability of the fpswa code that rate-limits logging of messages. There are 2 distinctly different problems in this code. 1) If prctl is used to disable logging, last_time is never updated. The result is that fpu_swa_count is zeroed out on EVERY fp fault. This causes a very very hot cache line. The fix reduces the wallclock time of a 1024p FP exception test from 28734 sec to 19 sec!!! 2) On VERY large systems, excessive messages are logged because multiple cpus can each reset or increment fpu_swa_count at about the same time. The result is that hundreds of messages are logged each second. The fixes reduces the logging rate to ~1 per second. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-12[IA64] fix arch/ia64/mm/contig.c:235: warning: unused variable `nid'Tony Luck
This warning only shows up with CONFIG_VIRTUAL_MEM_MAP=y and CONFIG_FLATMEM=y. There is only one caller left for register_active_ranges() from the contig.c code ... so it doesn't need to pick up the node number, the node number is always zero. Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-12Fix inotify maintainers entryCal Peake
Update the inotify entry in MAINTAINERS to be consistent with the rest of the file. Signed-off-by: Cal Peake <cp@absolutedigital.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12Fix typo in new debug options.Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12Jon needs a new shift key.Dave Jones
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12fs: Convert kmalloc() + memset() to kzalloc() in fs/.Robert P. J. Day
Convert the single available instance of kmalloc() + memset() to kzalloc() in the fs/ directory. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12configfs.h: Remove dead macro definitions.Robert P. J. Day
Delete the __ATTR-related macro definitions since these are now defined in include/linux/sysfs.h. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12kconfig: Standardize "depends" -> "depends on" in Kconfig filesRobert P. J. Day
Standardize the miniscule percentage of occurrences of "depends" in Kconfig files to "depends on", and update kconfig-language.txt to reflect that. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12e100: replace kmalloc with kcallocYan Burman
Replace kmalloc+memset with kcalloc Signed-off-by: Yan Burman <burman.yan@gmail.com> Acked-By: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12um: replace kmalloc+memset with kzallocYan Burman
Replace kmalloc+memset with kzalloc Signed-off-by: Yan Burman <burman.yan@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12fix typo in net/ipv4/ip_fragment.cPeter Zijlstra
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12[IA64] s/termios/ktermios/ in simserial.cTony Luck
This got missed in 606d099cdd1080bbb50ea50dc52d98252f8f10a1 Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-12[PATCH] remove config ordering/dependency between ucb1400-ts and sound subsystemNicolas Pitre
Commit 2d4ba4a3b9aef95d328d74a17ae84f8d658059e2 introduced a dependency that was never meant to exist when the ac97_bus.c module was created. Move ac97_bus.c up the directory hierarchy to make sure it is built when selected even if sound is configured out so things work as originally intended. Signed-off-by: Nicolas Pitre <nico@cam.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-12include/linux/compiler.h: reject gcc 3 < gcc 3.2Alistair John Strachan
The kernel doesn't compile with GCC <3.2, do not allow it to succeed if GCC 3.0.x or 3.1.x are used. Signed-off-by: Alistair John Strachan <s0348365@sms.ed.ac.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12Kconfig: fix spelling error in config KALLSYMS help textJesper Juhl
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-By: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12Remove duplicate "have to" in commentRolf Eike Beer
Introduced in commit 7cc13edc139108bb527b692f0548dce6bc648572. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: [patch 3/3] OCFS2 Configurable timeouts - Protocol changes [patch 2/3] OCFS2 Configurable timeouts [patch 1/3] OCFS2 - Expose struct o2nm_cluster ocfs2: Synchronize feature incompat flags in ocfs2_fs.h ocfs2: update mount option documentation ocfs2: local mounts
2006-12-12Fix small typo in drivers/serial/icom.cThomas Hisch
Signed-off-by: Thomas Hisch <t.hisch@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12[IA64] kexec/kdump: tidy up declaration of relocate_new_kernel_tHorms
* Make NORET_TYPE and ATTRIB_NORET in line with the declaration for other architectures * Add parameter names Signed-Off-By: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-12[IA64] Kexec/Kdump: honour non-zero crashkernel offset.Horms
There seems to be a value in both allowing the kernel to determine the base offset of the crashkernel automatically and allowing users's to sepcify it. The old behaviour on ia64, which is still the current behaviour on most architectures is for the user to always specify the address. Recently ia64 was changed so that it is always automatically determined. With this patch the kernel automatically determines the offset if the supplied value is 0, otherwise it uses the value provided. This should probably be backed by a documentation change. Signed-Off-By: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-12[IA64] CONFIG_KEXEC/CONFIG_CRASH_DUMP permutationsHorms
Actually, on reflection I think that there is a good case for keeping the options separate. I am thinking particularly of people who want a very small crashdump kernel and thus don't want to compile in kexec. The patch below should fix things up so that all valid combinations of KEXEC, CRASH_DUMP and VMCORE compile cleanly - VMCORE depends on CRASH_DUMP which is why I said valid combinations. In a nutshell it just untangles unrelated code and switches around a few defines. Please note that it creats a new file, arch/ia64/kernel/crash_dump.c This is in keeping with the i386 implementation. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-12Use consistent casing in help messageSamuel Tardieu
Signed-off-by: Samuel Tardieu <sam@rfc1149.net> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12[IA64] Do not call SN_SAL_SET_CPU_NUMBER twice on cpu 0Jay Lan
This is an SN specific patch. Architectually, cpu_init is always called twice on cpu 0 and thus resulted in two SN_SAL_SET_CPU_NUMBER calls. This was harmless in production kernel; however, it can cause problem on booting up a crashdump kernel at Altix. Here is the patch that detects the second sn_cpu_init call and skips the second call to SN_SAL_SET_CPU_NUMBER. Signed-Off-By: Jay Lan <jlan@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-12EXT{2,3,4}_FS: remove outdated part of the help textJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Acked-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-12Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c: Fix OMAP clock prescaler to match the comment i2c: Refactor a kfree in i2c-dev i2c: Fix return value check in i2c-dev i2c: Enable PEC on more i2c-i801 devices i2c: Discard the i2c algo del_bus wrappers i2c: New ARM Versatile/Realview bus driver i2c: fix broken ds1337 initialization i2c: i2c-i801 documentation update i2c: Use the __ATTR macro where possible i2c: Whitespace cleanups i2c: Use put_user instead of copy_to_user where possible i2c: New Atmel AT91 bus driver i2c: Add support for nested i2c bus locking i2c: Cleanups to the i2c-nforce2 bus driver i2c: Add request/release_mem_region to i2c-ibm_iic bus driver i2c: New Philips PNX bus driver i2c: Delete the broken i2c-ite bus driver i2c: Update the list of driver IDs i2c: Fix documentation typos
2006-12-12hwmon: Add MAINTAINERS entry for new ams driverStelian Pop
Signed-off-by: Stelian Pop <stelian@popies.net> Acked-by: Michael Hanselmann <linux-kernel@hansmi.ch> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-12hwmon: New AMS hardware monitoring driverStelian Pop
This driver adds support for the Apple Motion Sensor (AMS) as found in 2005 revisions of Apple PowerBooks and iBooks. It implements both the PMU and I2C variants. The I2C driver and mouse emulation is based on code by Stelian Pop, while the PMU driver has been developped by Michael Hanselmann. HD parking support will be added later. Various people contributed fixes to this driver, including Aristeu Sergio Rozanski Filho and Jean Delvare. Signed-off-by: Stelian Pop <stelian@popies.net> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Robert Love <rml@novell.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-12hwmon/w83793: Add documentation and maintainerRudolf Marek
Documentation for the new w83793 hardware monitoring driver, originally provided by Yuan My from Winbond. Also add myself as the maintainer of this driver. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-12hwmon: New Winbond W83793 hardware monitoring driverRudolf Marek
Add support for the W83793 hardware monitoring chip. This driver was originally contributed by Yuan Mu of Winbond Electronics Corp. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-12hwmon: Update Rudolf Marek's e-mail addressJean Delvare
The Silicon Hill club is not what it used to be. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-12hwmon/f71805f: Fix the device address decodingJean Delvare
The lowest 3 bits are ignored, and the chip decodes all 8 addresses, not only the 2 it needs. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-12hwmon/f71805f: Always create all fan inputsJean Delvare
Fans can be hotplugged, so we should create sysfs file even for fans which are disabled at driver load time. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-12hwmon/f71805f: Add support for the Fintek F71872F/FG chipJean Delvare
Add support for the Fintek F71872F/FG Super-I/O chip. It is basically the same as the Fintek F71805F/FG as far as hardware monitoring is concerned, with two additional internal voltages monitored (VSB and battery), and 6 VID inputs (not yet supported.) To make things a bit more confusing, two of the voltage input pins (in4 and in8) can be used for other functions. The driver reads the pin configuration from the Super-I/O configuration space to decide whether it must create interface files for these inputs or not. Many thanks to Nikolay Derkach for testing the early iterations of this code and reporting bugs. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-12hwmon: New PC87427 hardware monitoring driverJean Delvare
This is a new hardware monitoring driver for the National Semiconductor PC87427 Super-I/O chip. It only supports fan speed monitoring for now, while the chip can do much more. Thanks to Amir Habibi at Candelis for setting up a test system, and to Michael Kress for testing several iterations of this driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>