summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2013-08-07ip_tunnel: embed hash list headstephen hemminger
The IP tunnel hash heads can be embedded in the per-net structure since it is a fixed size. Reduce the size so that the total structure fits in a page size. The original size was overly large, even NETDEV_HASHBITS is only 8 bits! Also, add some white space for readability. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Pravin B Shelar <pshelar@nicira.com>. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Update version to 2.2.4Michael Chan
and update copyright year. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Add pci shutdown handler.Michael Chan
WoL and power state changes will now be done in the shutdown handler. open/close/ethtool will no longer change the power state. NVRAM operations can now be permitted whether the device is up or down. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Use SIMPLE_DEV_PM_OPS.Michael Chan
This simplifies the suspend/resume code. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Refactor WoL setup into a separate function.Michael Chan
Separate MAC and PHY WoL setup code into a separate function. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Use kernel APIs for WoL and power state changes.Michael Chan
Simple API changes with no functional changes. Signed-off-by: Michael Chan <mchan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07bnx2: Handle error condition in ->slot_reset()Michael Chan
by closing the device if necessary. Otherwise, since NAPI state is already disabled, a subsequent close will hang the system. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: update driver versionSathya Perla
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Initialize "status" in be_cmd_get_die_temperature()Vasundhara Volam
Uninitialized value was being returned in the non-failure case. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: fixup log msgs for async eventsVasundhara Volam
Log the event type for unknown async events Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Fix displaying supported speeds for BE2Vasundhara Volam
The BE2 FW GET_PHY_DETAILS cmd does not return fixed speeds supported. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: don't limit max MAC and VLAN countsVasundhara Volam
For SH-R and Lancer-R, use the FW supported values for Max unicast MACs, Max VLANs and Max multicast MACs. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Do not call get_die_temperature cmd for VFVasundhara Volam
This is a chip wide value and the PFs already report it. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-07be2net: Adding more speeds reported by get_settingsVasundhara Volam
The new speeds are supported by variants of the Skyhawk-R chip. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05gianfar: Cleanup TxFCB insertion on xmitClaudiu Manoil
Cleanup gfar_start_xmit()'s fast path by factoring out "redundant" FCB insertion code (repeated gfar_add_fcb() calls and related) and by reducing the number of if() clauses (i.e. if(fcb) checks). Improve maintainability (e.g. there's less code and easier to read) also by introducing do_csum and do_vlan to mark the other 2 Tx TOE functionalities, following the same model as do_tstamp. fcb_len may also be 0 now, to mark that Tx FCB insertion conditions (do_csum, do_vlan, do_tstamp) have not been met. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05gianfar: Fix Tx csum generation errata handlingClaudiu Manoil
Both [eTSEC76] and [eTSEC12] errata relate to Tx checksum generation (for some MPC83xx and MCP8548 older revisions). They require the same workaround: manual checksum computation and insertion, and disabling the H/W Tx csum acceleration feature (per frame) through Tx FCB (Frame Control Block) csum offload settings. The workaround for [eTSEC76] needs to be fixed because it currently fails to disable H/W Tx csum insertion via FCB. This patch fixes it and provides a common workaround implementation for both Tx csum errata. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05bonding: remove locking from bond_set_rx_mode()Veaceslav Falico
We're already protected by RTNL lock, so nothing can happen to bond/its slaves, and thus the locking is useless here (both bond->lock and bond->curr_active_slave). Also, add ASSERT_RTNL() both to bond_set_rx_mode() and bond_hw_addr_swap() to catch possible uses of it without RTNL locking. This patch also saves us from a lockdep false-positive in bond_set_rx_mode() vs bond_hw_addr_swap(). CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05drivers: net: cpsw: Add support for new CPSW IP versionMugunthan V N
The new IP version has a minor changes and the offsets are same as the previous version, so adding new IP version support in the driver. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05sctp: Pack dst_cookie into 1st cacheline hole for 64bit hostfan.du
As dst_cookie is used in fast path sctp_transport_dst_check. Before: struct sctp_transport { struct list_head transports; /* 0 16 */ atomic_t refcnt; /* 16 4 */ __u32 dead:1; /* 20:31 4 */ __u32 rto_pending:1; /* 20:30 4 */ __u32 hb_sent:1; /* 20:29 4 */ __u32 pmtu_pending:1; /* 20:28 4 */ /* XXX 28 bits hole, try to pack */ __u32 sack_generation; /* 24 4 */ /* XXX 4 bytes hole, try to pack */ struct flowi fl; /* 32 64 */ /* --- cacheline 1 boundary (64 bytes) was 32 bytes ago --- */ union sctp_addr ipaddr; /* 96 28 */ After: struct sctp_transport { struct list_head transports; /* 0 16 */ atomic_t refcnt; /* 16 4 */ __u32 dead:1; /* 20:31 4 */ __u32 rto_pending:1; /* 20:30 4 */ __u32 hb_sent:1; /* 20:29 4 */ __u32 pmtu_pending:1; /* 20:28 4 */ /* XXX 28 bits hole, try to pack */ __u32 sack_generation; /* 24 4 */ u32 dst_cookie; /* 28 4 */ struct flowi fl; /* 32 64 */ /* --- cacheline 1 boundary (64 bytes) was 32 bytes ago --- */ union sctp_addr ipaddr; /* 96 28 */ Signed-off-by: Fan Du <fan.du@windriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05bonding: add bond_time_in_interval() and use it for time comparisonVeaceslav Falico
Currently we use a lot of time comparison math for arp_interval comparisons, which are sometimes quite hard to read and understand. All the time comparisons have one pattern: (time - arp_interval_jiffies) <= jiffies <= (time + mod * arp_interval_jiffies + arp_interval_jiffies/2) Introduce a new helper - bond_time_in_interval(), which will do the math in one place and, thus, will clean up the logical code. This helper introduces a bit of overhead (by always calculating the jiffies from arp_interval), however it's really not visible, considering that functions using it usually run once in arp_interval milliseconds. There are several lines slightly over 80 chars, however breaking them would result in more hard-to-read code than several character after the 80 mark. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05bonding: call slave_last_rx() only once per slaveVeaceslav Falico
Simple cleanup to not call slave_last_rx() on every time function. It won't give any measurable boost - but looks cleaner and easier to understand. There are no time-consuming functions in between these calls, so it's safe to call it in the beginning only once. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05tile: fix missing unlock on error in tile_net_open()Wei Yongjun
Add the missing unlock before return from function tile_net_open() in the error handling case. Introduced by commit f3286a3af89d6db7a488f3e8f02b98d67d50f00c. (tile: support multiple mPIPE shims in tilegx network driver) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05net: mlx4: Staticize local functionsJingoo Han
These local functions are used only in this file. Fix the following sparse warnings: drivers/net/ethernet/mellanox/mlx4/cmd.c:803:5: warning: symbol 'MLX4_CMD_UPDATE_QP_wrapper' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlx4/cmd.c:812:5: warning: symbol 'MLX4_CMD_GET_OP_REQ_wrapper' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlx4/cmd.c:1547:5: warning: symbol 'mlx4_master_immediate_activate_vlan_qos' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-By: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05net: micrel: Staticize local functionsJingoo Han
These local functions are used only in this file. Fix the following sparse warnings: drivers/net/ethernet/micrel/ks8842.c:708:6: warning: symbol 'ks8842_handle_rx' was not declared. Should it be static? drivers/net/ethernet/micrel/ks8842.c:718:6: warning: symbol 'ks8842_handle_tx' was not declared. Should it be static? drivers/net/ethernet/micrel/ks8842.c:727:6: warning: symbol 'ks8842_handle_rx_overrun' was not declared. Should it be static? drivers/net/ethernet/micrel/ks8842.c:735:6: warning: symbol 'ks8842_tasklet' was not declared. Should it be static? drivers/net/ethernet/micrel/ks8851_mll.c:691:6: warning: symbol 'ks_enable_qmu' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05be2net: Staticize local functionsJingoo Han
These local functions are used only in this file. Fix the following sparse warnings: drivers/net/ethernet/emulex/benet/be_main.c:475:6: warning: symbol 'populate_erx_stats' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:1485:6: warning: symbol 'be_rx_compl_process_gro' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:2262:5: warning: symbol 'be_poll' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:3223:6: warning: symbol 'flash_cookie' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:3280:27: warning: symbol 'get_fsec_info' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:1013:5: warning: symbol 'be_cmd_mccq_ext_create' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:1071:5: warning: symbol 'be_cmd_mccq_org_create' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:3166:5: warning: symbol 'be_cmd_get_profile_config_mbox' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_cmds.c:3194:5: warning: symbol 'be_cmd_get_profile_config_mccq' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:96:6: warning: symbol '_be_roce_dev_remove' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:113:6: warning: symbol '_be_roce_dev_open' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_roce.c:129:6: warning: symbol '_be_roce_dev_close' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05bna: Staticize local functionsJingoo Han
bna_rx_sm_stop_wait_entry(), bna_rx_sm_rxf_stop_wait_entry(), bna_rx_sm_started_entry(), bna_rx_sm_cleanup_wait_entry(), and bna_rx_sm_cleanup_wait() are used only in this file. Fix the following sparse warnings: drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1423:1: warning: symbol 'bna_rx_sm_stop_wait_entry' was not declared. Should it be static? drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1476:1: warning: symbol 'bna_rx_sm_rxf_stop_wait_entry' was not declared. Should it be static? drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1532:1: warning: symbol 'bna_rx_sm_started_entry' was not declared. Should it be static? drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1597:1: warning: symbol 'bna_rx_sm_cleanup_wait_entry' was not declared. Should it be static? drivers/net/ethernet/brocade/bna/bna_tx_rx.c:1602:1: warning: symbol 'bna_rx_sm_cleanup_wait' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-04vxlan: fix rcu related warningstephen hemminger
Vxlan remote list is protected by RCU and guaranteed to be non-empty. Split out the rcu and non-rcu access to the list to fix warning Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-04bridge: fix rcu check warning in multicast port groupstephen hemminger
Use of RCU here with out marked pointer and function doesn't match prototype with sparse. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03ax88179_178a: avoid copy of tx tcp packetsEric Dumazet
ax88179_tx_fixup() has quite complex code trying to push 8 bytes of control data (len/mss), but fails to do it properly for TCP packets, incurring an extra copy and point of memory allocation failure. Lets use the simple and approved way. dev->needed_headroom being 8, all frames should have 8 bytes of headroom, so the extra copy should be unlikely anyway. This patch should improve performance for TCP xmits. Reported-by: Ming Lei <ming.lei@canonical.com> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Merge net into net-next to setup some infrastructure Eric Dumazet needs for usbnet changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Don't ignore user initiated wireless regulatory settings on cards with custom regulatory domains, from Arik Nemtsov. 2) Fix length check of bluetooth information responses, from Jaganath Kanakkassery. 3) Fix misuse of PTR_ERR in btusb, from Adam Lee. 4) Handle rfkill properly while iwlwifi devices are offline, from Emmanuel Grumbach. 5) Fix r815x devices DMA'ing to stack buffers, from Hayes Wang. 6) Kernel info leak in ATM packet scheduler, from Dan Carpenter. 7) 8139cp doesn't check for DMA mapping errors, from Neil Horman. 8) Fix bridge multicast code to not snoop when no querier exists, otherwise mutlicast traffic is lost. From Linus Lüssing. 9) Avoid soft lockups in fib6_run_gc(), from Michal Kubecek. 10) Fix races in automatic address asignment on ipv6, which can result in incorrect lifetime assignments. From Jiri Benc. 11) Cure build bustage when CONFIG_NET_LL_RX_POLL is not set and rename it CONFIG_NET_RX_BUSY_POLL to eliminate the last reference to the original naming of this feature. From Cong Wang. 12) Fix crash in TIPC when server socket creation fails, from Ying Xue. 13) macvlan_changelink() silently succeeds when it shouldn't, from Michael S Tsirkin. 14) HTB packet scheduler can crash due to sign extension, fix from Stephen Hemminger. 15) With the cable unplugged, r8169 prints out a message every 10 seconds, make it netif_dbg() instead of netif_warn(). From Peter Wu. 16) Fix memory leak in rtm_to_ifaddr(), from Daniel Borkmann. 17) sis900 gets spurious TX queue timeouts due to mismanagement of link carrier state, from Denis Kirjanov. 18) Validate somaxconn sysctl to make sure it fits inside of a u16. From Roman Gushchin. 19) Fix MAC address filtering on qlcnic, from Shahed Shaikh. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (68 commits) qlcnic: Fix for flash update failure on 83xx adapter qlcnic: Fix link speed and duplex display for 83xx adapter qlcnic: Fix link speed display for 82xx adapter qlcnic: Fix external loopback test. qlcnic: Removed adapter series name from warning messages. qlcnic: Free up memory in error path. qlcnic: Fix ingress MAC learning qlcnic: Fix MAC address filter issue on 82xx adapter net: ethernet: davinci_emac: drop IRQF_DISABLED netlabel: use domain based selectors when address based selectors are not available net: check net.core.somaxconn sysctl values sis900: Fix the tx queue timeout issue net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing fails r8169: remove "PHY reset until link up" log spam net: ethernet: cpsw: drop IRQF_DISABLED htb: fix sign extension bug macvlan: handle set_promiscuity failures macvlan: better mode validation tipc: fix oops when creating server socket fails net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLL ...
2013-08-03qlcnic: Fix for flash update failure on 83xx adapterHimanshu Madhani
Flash update routine was improperly checking register read API return value. Modify register read API and perform proper error check. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix link speed and duplex display for 83xx adapterRajesh Borundia
o Set link speed and duplex to unknown when link is not up. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix link speed display for 82xx adapterRajesh Borundia
o Do not obtain link speed from register when adapter link is down. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix external loopback test.Shahed Shaikh
Driver was not handling external loopback diagnostic test request. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Removed adapter series name from warning messages.Pratik Pujar
Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Free up memory in error path.Himanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix ingress MAC learningShahed Shaikh
o Delete MAC address from the adapter's filter table if the source MAC address of ingress packet matches. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix MAC address filter issue on 82xx adapterShahed Shaikh
Driver was passing the address of a pointer instead of the pointer itself. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03fib_rules: reorder struct fib_rules fieldsEric Dumazet
Move refcnt, pref, suppress_ifgroup, suppress_prefixlen out of first cache line, as they are not used in fast path. Make sure ctarget & fr_net are in first cache line. (Assuming 64 bit arches and 64 bytes cache lines) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03net: ethernet: davinci_emac: drop IRQF_DISABLEDMugunthan V N
IRQF_DISABLED is a no-op by now and should be removed. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03Merge branch 'for-3.11' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd bugfixes from Bruce Fields: "Most of this is due to a screwup on my part -- some gss-proxy crashes got fixed before the merge window but somehow never made it out of a temporary git repo on my laptop...." * 'for-3.11' of git://linux-nfs.org/~bfields/linux: svcrpc: set cr_gss_mech from gss-proxy as well as legacy upcall svcrpc: fix kfree oops in gss-proxy code svcrpc: fix gss-proxy xdr decoding oops svcrpc: fix gss_rpc_upcall create error NFSD/sunrpc: avoid deadlock on TCP connection due to memory pressure.
2013-08-03Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix chip initialization/configuration in MAX6697 driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max6697) fix MAX6581 ideality
2013-08-03Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull arm fixes fixes from Russell King: "This fixes a couple of problems with commit 48be69a026b2 ("ARM: move signal handlers into a vdso-like page"), one of which was originally discovered via my testing originally, but the fix for it was never actually committed. The other shows up on noMMU builds, and such platforms are extremely rare and as such are not part of my nightly testing" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: fix nommu builds with 48be69a02 (ARM: move signal handlers into a vdso-like page) ARM: fix a cockup in 48be69a02 (ARM: move signal handlers into a vdso-like page)
2013-08-03fib_rules: fix suppressor names and default valuesStefan Tomanek
This change brings the suppressor attribute names into line; it also changes the data types to provide a more consistent interface. While -1 indicates that the suppressor is not enabled, values >= 0 for suppress_prefixlen or suppress_ifgroup reject routing decisions violating the constraint. This changes the previously presented behaviour of suppress_prefixlen, where a prefix length _less_ than the attribute value was rejected. After this change, a prefix length less than *or* equal to the value is considered a violation of the rule constraint. It also changes the default values for default and newly added rules (disabling any suppression for those). Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03vlan: cleanup the usage of vlan_dev_priv(dev)Wang Sheng-Hui
This patch cleanup 2 points for the usage of vlan_dev_priv(dev): * In vlan_dev.c/vlan_dev_hard_header, we should use the var *vlan directly after grabing the pointer at the beginning with *vlan = vlan_dev_priv(dev); when we need to access the fields of *vlan. * In vlan.c/register_vlan_device, add the var *vlan pointer struct vlan_dev_priv *vlan; to cleanup the code to access the fields of vlan_dev_priv(new_dev). Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03hwmon: (max6697) fix MAX6581 idealityVivien Didelot
Without this patch, the values for ideality (register 0x4b) and ideality selection mask (register 0x4c) are inverted. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: stable@vger.kernel.org # 3.9+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-03Merge branch 'security-fixes' into fixesRussell King
2013-08-03ARM: fix nommu builds with 48be69a02 (ARM: move signal handlers into a ↵Russell King
vdso-like page) Olof reports that noMMU builds error out with: arch/arm/kernel/signal.c: In function 'setup_return': arch/arm/kernel/signal.c:413:25: error: 'mm_context_t' has no member named 'sigpage' This shows one of the evilnesses of IS_ENABLED(). Get rid of it here and replace it with #ifdef's - and as no noMMU platform can make use of sigpage, depend on CONIFG_MMU not CONFIG_ARM_MPU. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-03ARM: fix a cockup in 48be69a02 (ARM: move signal handlers into a vdso-like page)Russell King
Unfortunately, I never committed the fix to a nasty oops which can occur as a result of that commit: ------------[ cut here ]------------ kernel BUG at /home/olof/work/batch/include/linux/mm.h:414! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 490 Comm: killall5 Not tainted 3.11.0-rc3-00288-gabe0308 #53 task: e90acac0 ti: e9be8000 task.ti: e9be8000 PC is at special_mapping_fault+0xa4/0xc4 LR is at __do_fault+0x68/0x48c This doesn't show up unless you do quite a bit of testing; a simple boot test does not do this, so all my nightly tests were passing fine. The reason for this is that install_special_mapping() expects the page array to stick around, and as this was only inserting one page which was stored on the kernel stack, that's why this was blowing up. Reported-by: Olof Johansson <olof@lixom.net> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>