summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2007-06-11Blackfin SPI driver: fix bug SPI DMA incomplete transmissionBryan Wu
SPI writes intermittently drop bytes at end of DMA transfer http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3205 http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=2892 Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11[ARM] 4445/1: ANUBIS: Fix CPLD registersBen Dooks
Update the ANUBIS register definitions inline with the specs and ensure they are registered correctly. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-11[ARM] 4444/2: OSIRIS: CPLD suspend fixBen Dooks
Ensure the CPLD 8bit settings are preserved over a suspend/resume cycle as the CPU sends a hard-reset at resume time. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-11[ARM] 4443/1: OSIRIS: Add watchdog device to machine devicesBen Dooks
Add the watchdog timer to the list of devices the Osiris registers at startup. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-11[ARM] 4442/1: OSIRIS: Fix CPLD register definitionsBen Dooks
Fix the CPLD register definitions to correctly mirror the documentation Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-11Blackfin SPI driver: tweak spi cleanup function to match newer kernel changesMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <dbrownell@users.sourceforge.net>
2007-06-11Blackfin RTC drivers: update MAINTAINERS informationMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: Alessandro Zummo <a.zummo@towertech.it>
2007-06-11Blackfin serial driver: decouple PARODD and CMSPAR checking from PARENBMike Frysinger
as the termios info does not stipulate that the former are dependent on the latter Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin serial driver: actually implement the break_ctl() functionMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin serial driver: ignore framing and parity errorsMike Frysinger
if we get a break signal, we want to ignore framing and parity errors because those will always be set (by nature of the signal) Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin serial driver: hook up our UARTs STP bit with userspaces CMSPARMike Frysinger
so we can now do spaced/marked parity Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: move HI/LO macros into blackfin.h and punt the rest of ↵Mike Frysinger
macros.h as it includes VDSP macros we never use Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: redo our linker script a bitMike Frysinger
- we can start taking advantages of defines in asm-generic/vmlinux.lds.h - move our L1 relocated sections into init so it gets freed after relocation Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-14Blackfin arch: make sure we initialize our L1 Data B section properly based ↵Mike Frysinger
on the linked kernel Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-14Blackfin arch: fix bug can not wakeup from sleep via push buttonsMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: add support for Alon Bar-Lev's dynamic kernel command-lineMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: add missing gpio.h header to fix compiling in some pm ↵Michael Hennerich
configurations Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: As Mike pointed out range goes form m..MAX_BLACKFIN_GPIO -1Michael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: fix spelling typo in outputMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-14Blackfin arch: try to split up functions like this into smaller units ↵Aubrey Li
according to LKML review Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: add proper ENDPROC()Mike Frysinger
add proper ENDPROC() to close out assembly functions so size/type is set properly in the final ELF image Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: move more of our startup code to .init so it can be freed ↵Mike Frysinger
once we are up and running Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: unify differences between our diff head.S files -- no ↵Mike Frysinger
functional changes Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: update defconfigsMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: scrub old console definesMike Frysinger
since they arent respected anymore (use console=) and just confuse people Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: fixup Blackfin MAINTIANERS team member listBryan Wu
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-14Blackfin arch: implement a basic /proc/sram file for L1 allocation visibilityMike Frysinger
implement a basic /proc/sram file for L1 allocation visibility until we can rewrite the entire L1 allocator (which would include a proper mechanism) Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: mark our memory init functions with __init so they get freed ↵Mike Frysinger
after init Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: all symbols were offset by 4k, since we didn't have the ↵Robin Getz
__text label. Bug tracker: http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3231 Singed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-14Blackfin arch: fix bug ad1836 fails to build properly for BF533-EZKITRoy Huang
bug log here: http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3166 Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: spelling fixesSimon Arlott
Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: DMA code minor naming convention fixAubrey Li
Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi>
2007-06-11Blackfin arch: remove defconfig fileMike Frysinger
Since we have board-specific defconfigs and the default is set to BF537-STAMP, we no longer need this one Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11libata: limit post SRST nsect/lbal wait to ~100msTejun Heo
After SRST, libata used to wait for nsect/lbal to be set to 1/1 for the slave device. However, some ATAPI devices don't set nsect/lbal after SRST and the wait itself isn't too useful as we're gonna wait for !BSY right after that anyway. Before reset-seq update, nsect/lbal wait failure used to be ignored and caused 30sec delay during detection. After reset-seq, all timeouts are considered error conditions making libata fail to detect such ATAPI devices. This patch limits nsect/lbal wait to around 100ms. This should give acceptable behavior to such ATAPI devices while not disturbing the heavily used code path too much. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-11libata: force PIO on IOMEGA ZIP 250 ATAPITejun Heo
IOMEGA ZIP 250 ATAPI claims MWDMA0 support but fails SETXFERMODE if asked to configure itself to MWDMA0. Force PIO. This fixes bugzilla bug#8497. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Calvin Walton <calvin.walton@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-10[ARM] VFP: fix section mismatch errorRussell King
Fix a real section mismatch issue; the test code is thrown away after initialisation, but if we do not detect the VFP hardware, it is left hooked into the exception handler. Any VFP instructions which are subsequently executed risk calling the discarded exception handler. Introduce a new "null" handler which returns to the "unrecognised fault" return address. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-10drm: fix radeon setparam on 32/64 bit systems.Dave Airlie
The alignment on 64-bit is different for 64-bit values. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-06-10drm/i915: Add support for the G33, Q33, and Q35 chipsets.Wang Zhenyu
These require that the status page be referenced by a pointer in GTT, rather than phsyical memory. So, we have the X Server allocate that memory and tell us the address, instead. Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-06-10i915: add new pciids for 945GME, 965GME/GLEWang Zhenyu
Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-06-09libata passthru: update cached device paramtersAlbert Lee
INIT_DEV_PARAMS and SET_MULTI_MODE change the device parameters cached by libata. Re-read IDENTIFY DEVICE info and update the cached device paramters when seeing these commands. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata passthru: always enforce correct DEV bitAlbert Lee
Always enforce correct DEV bit since we know which drive the command is targeted. SAT demands to ignore the DEV bit, too. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata passthru: map UDMA protocolsAlbert Lee
Map the ATA passthru UDMA protocols to ATA_PROT_DMA. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata passthru: support PIO multi commandsAlbert Lee
support the pass through of PIO multi commands. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata passthru: update protocol numbersAlbert Lee
Update the ATA passthru protocol numbers according to the new spec. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata: Correct abuse of languageAlan Cox
The controller is not reporting an unlawful type, it is reporting an invalid type. Illegal specifically means "prohibited by law" Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata-core/sff: Fix multiple assumptions about DMAAlan Cox
The ata IRQ ack functions are only used when debugging. Unfortunately almost every controller that calls them can cause crashes in some configurations as there are missing checks for bmdma presence. In addition ata_port_start insists of installing DMA buffers and pad buffers for controllers regardless. The SFF controllers actually need to make that decision dynamically at controller setup time and all need the same helper - so we add ata_sff_port_start. Future patches will switch the SFF drivers to use this. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09ahci: Add MCP73/MCP77 support to AHCI driverPeer Chen
Add the MCP73/MCP77 support to ahci driver. Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata: fix hw_sata_spd_limit initializationTejun Heo
hw_sata_spd_limit used to be incorrectly initialized to zero instead of UINT_MAX if SPD is zero in SControl register. This breaks PHY speed down. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata: print device model and firmware revision for ATAPI devicesAlbert Lee
For ATA/CFA devices, libata prints out the device model and firmware revision. Do the same for ATAPI devices. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata: fix probe time irq printoutsOlof Johansson
Most drivers don't seem to fill out the host->irq field, resulting in the wrong (no) irq being reported at probe time. For example, sil24 on my system: ata1: SATA max UDMA/100 cmd 0xd00008009001f000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0 ata2: SATA max UDMA/100 cmd 0xd000080090021000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0 Since they're allocated and set up in ata_host_activate(), just save them away there. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 02:17:47 +0000