summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2007-08-02USB HID: Add all Logitech Harmonies to blacklistPhil Dibowitz
This patch adds the entire range of Logitech's ProductIDs that are reserved for their Harmony remotes. The in-kernel HID driver can't do anything with these, and now there is a GPL user-space application that can handle them: http://www.sf.net/projects/harmonycontrol Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-02USB HID: update description of USBHID in MAINTAINERSJiri Kosina
Make it more clear to users what kinds of hardware USBHID handles, so that they can send reports and queries properly. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-02HID: remove the Applie IR sensor from the hid_blacklistTino Keitel
The IR sensor in some newer Apple computers has no other driver in the kernel, yet. However, the macmini driver in lirc requires a HID device for the IR sensor. Cc: Soeren Sonnenburg <kernel@nn7.de> Signed-off-by: Tino Keitel <tino.keitel@tikei.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-01Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] ITC: Reduce rating for ITC clock if ITCs are drifty [IA64] SN2: Fix up sn2_rtc clock [IA64] Fix wrong access to irq_desc[] in iosapic_register_intr(). [IA64] Fix possible race in destroy_and_reserve_irq() [IA64] Fix registered interrupt check [IA64] Remove a few duplicate includes [IA64] Allow smp_call_function_single() to current cpu [IA64] fix a few section mismatch warnings
2007-08-01Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: scc_pata: PIO fixes piix/slc90e66: fix PIO1 handling in ->speedproc method (take 2) jmicron: PIO fixes it8213: PIO fixes (take 2) cs5535: PIO fixes cs5520: fix PIO auto-tuning in ->ide_dma_check method drivers/scsi/ide-scsi.c: kmalloc + memset conversion to kzalloc drivers/ide/arm/icside.c: kmalloc + memset conversion to kzalloc ide: eliminate warnings in ide-tape.c ide: fix runtogether printk's in cmd64x IDE driver sis5513: Add FSC Amilo A1630 PCI subvendor/dev to laptops alim15x3: Correct HP detect ide: Fix an overrun found in the CS5535 IDE driver
2007-08-01FRV: Enable the MB86943 PCI arbiter correctlyDavid Howells
Enable the MB93090 motherboard's MB86943 PCI arbiter correctly by assigning to the register rather than comparing against it. This is required to support bus mastering. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-01Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_sis: fix MWDMA for <= UDMA66 chipsets and UDMA for UDMA33 chipsets libata: blacklist SAMSUNG HD401LJ / ZZ100-15 for NCQ ata_piix: add Tecra M3 to broken suspend blacklist ata_piix: implement piix_borken_suspend() pci: rename __pci_reenable_device() to pci_reenable_device() libata-sff; Unbreak non DMA capable controllers again pata_cmd64x: Correct the speed ranges
2007-08-01genirq: temporary fix for level-triggered IRQ resendThomas Gleixner
Marcin Slusarz reported a ne2k-pci "hung network interface" regression. delayed disable relies on the ability to re-trigger the interrupt in the case that a real interrupt happens after the software disable was set. In this case we actually disable the interrupt on the hardware level _after_ it occurred. On enable_irq, we need to re-trigger the interrupt. On i386 this relies on a hardware resend mechanism (send_IPI_self()). Actually we only need the resend for edge type interrupts. Level type interrupts come back once enable_irq() re-enables the interrupt line. I assume that the interrupt in question is level triggered because it is shared and above the legacy irqs 0-15: 17: 12 IO-APIC-fasteoi eth1, eth0 Looking into the IO_APIC code, the resend via send_IPI_self() happens unconditionally. So the resend is done for level and edge interrupts. This makes the problem more mysterious. The code in question lib8390.c does disable_irq(); fiddle_with_the_network_card_hardware() enable_irq(); The fiddle_with_the_network_card_hardware() might cause interrupts, which are cleared in the same code path again, Marcin found that when he disables the irq line on the hardware level (removing the delayed disable) the card is kept alive. So the difference is that we can get a resend on enable_irq, when an interrupt happens during the time, where we are in the disabled region. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-01Fix WARN_ON() on bitfield ops for all other archsHeiko Carstens
Fixes WARN_ON() on bitfiels ops for all architectures that have been left out in 8d4fbcfbe0a4bfc73e7f0297c59ae514e1f1436f. Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-01scc_pata: PIO fixesBartlomiej Zolnierkiewicz
* Use pio == 255 == "auto-tune" in scc_config_drive_for_dma() instead of forcing PIO4 on PIO fallback. Fix comment while at it. * Rename scc_tuneproc() to scc_tune_pio() and add scc_tuneproc() wrapper. Move finding of the best PIO mode and setting of transfer mode on the device to the new wrapper. * Fix scc_tune_chipset() to tune PIO modes. Do a small cleanup while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01piix/slc90e66: fix PIO1 handling in ->speedproc method (take 2)Bartlomiej Zolnierkiewicz
* Don't call {piix,slc90e66}_dma_2_pio() for PIO modes in {piix,slc90e66}_tune_chipset(). * Add PIO1 handling to {piix,slc90e66}_tune_chipset(). * Bump driver version. v2: * Remove PIO modes from {piix,slc90e66}_dma_2_pio(), they are no longer needed there (Noticed by Sergei) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01jmicron: PIO fixesBartlomiej Zolnierkiewicz
* Set transfer mode on the device in jmicron_tuneproc(), also add pio == 255 == "auto-tune" handling. * Use jmicron_tuneproc() in jmicron_config_drive_for_dma(). * Remove no longer needed config_jmicron_chipset_for_pio(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01it8213: PIO fixes (take 2)Bartlomiej Zolnierkiewicz
* Rename it8213_tuneproc() to it8213_tune_pio() and add it8213_tuneproc() wrapper. Move finding of the best PIO mode to the new wrapper. * Add setting of transfer mode on the device to it8213_tuneproc(). * Don't call it8213_dma_2_pio() for PIO modes in it8213_tune_chipset(). * Use it8213_tuneproc() in it8213_config_drive_for_dma(). v2: * Remove PIO modes from it8213_dma_2_pio(), they are no longer needed there (Noticed by Sergei) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01cs5535: PIO fixesBartlomiej Zolnierkiewicz
* Fix cs5535_tuneproc() to pass PIO transfer mode value instead of PIO mode number to cs5535_set_speed() (fixes random PIO timings being programmed and a possible OOPS). Do a little cleanup while at it. * Fix cs5535_set_speed() to check if the mate device is present (fixes PIO0 taskfile timings being used if there is no other device on the cable). * Use cs5535_tuneproc() in cs5535_dma_check(). The old code had the same issue as cs5535_tuneproc() and add additionally caused 0x00-0x04 transfer mode values (== default PIO, default PIO w/ IORDY + two invalid values) being set on the device instead of values 0x08-0x0c (XFER_PIO_[0,4]). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01cs5520: fix PIO auto-tuning in ->ide_dma_check methodBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01drivers/scsi/ide-scsi.c: kmalloc + memset conversion to kzallocMariusz Kozlowski
drivers/scsi/ide-scsi.c | 34642 -> 34536 (-106 bytes) drivers/scsi/ide-scsi.o | 171728 -> 171524 (-204 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01drivers/ide/arm/icside.c: kmalloc + memset conversion to kzallocMariusz Kozlowski
Is this a bug? In original verison memset cleared sizeof(state) bytes instead of sizeof(*state). If it was intentional then this patch is invalid. If not intentional -> valid :) Please review. Bart: Yes, it is a bug so this patch is a valid bugfix. :-) drivers/ide/arm/icside.c | 18883 -> 18849 (-34 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01ide: eliminate warnings in ide-tape.cStephen Rothwell
drivers/ide/ide-tape.c: In function '__idetape_kmalloc_stage': drivers/ide/ide-tape.c:2588: warning: large integer implicitly truncated to unsigned type drivers/ide/ide-tape.c:2616: warning: large integer implicitly truncated to unsigned type b_size in struct idetape_bh is an unsigned short. We sometimes assigne PAGE_SIZE to it and PAGE_SIZE can be 64K or larger, so make it a u32. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01ide: fix runtogether printk's in cmd64x IDE driverMeelis Roos
Fix a couple of runtogether printks in cmd64x.c IDE driver by adding proper newlines. Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01sis5513: Add FSC Amilo A1630 PCI subvendor/dev to laptopsDavid Lamparter
Recognise the FSC Amilo A1630's incarnation of a SiS5513 chip as laptop to get UDMA100 support. Signed-off-by: David Lamparter <equinox@diac24.net> Cc: Lionel Bouton <Lionel.Bouton@inet6.fr> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01alim15x3: Correct HP detectBartlomiej Zolnierkiewicz
Direct port of Alan's fix for pata_ali. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01ide: Fix an overrun found in the CS5535 IDE driverJordan Crouse
As found by the Coverity checker, and reported by Adrian Bunk, this fixes a overrun error in the CS5535 IDE driver. Somebody got a little excited with the if() statement - the CS5535 only supports UDMA 0-4. Bart: Not a bug per se since the upper layer will never feed this function with speed > XFER_UDMA_4 (thanks to ->ultra_mask being set to 0x1f). Worth fixing anyway. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01[IA64] ITC: Reduce rating for ITC clock if ITCs are driftyChristoph Lameter
Make sure to reduce the rating of the ITC clock if ITCs are drifty. If they are drifting then we have not synchronized the ITC values, nor are we doing the jitter compensation (useless since drift may increase the differentials arbitrarily). Without this patch it is possible that the ITC clock becomes selected as the system clock on systems with drifty ITCs which will result in nanosleep hanging. One can still select the itc clock manually on such systems via clocksource=itc (Produces nice hangs on SGI Altix.) Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-08-01[IA64] SN2: Fix up sn2_rtc clockChristoph Lameter
If the sn2_rtc clock is present then it is a must have since sn2_rtc provides a synchronized time source on Altix systems. So elevate the priority to 450. Otherwise the ITC would take precendence. Altix systems currently do not boot because the ITC clocksource is broken. It seems to assume that ITCs are synchronized and as a result nanosleep hangs (may be fixed in a different patch). While we are at it: Remove the sn2_mc definition. The sn2_rtc has a fixed address. No point in reading the address from memory. Removing it avoids touching one cacheline. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-08-01[IA64] Fix wrong access to irq_desc[] in iosapic_register_intr().Kenji Kaneshige
In error path we must unlock irq_desc[irq].lock before we change 'irq'. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-08-01[SCSI] lpfc 8.2.2 : Change version number to 8.2.2James Smart
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Style cleanupsJames Smart
- Clean up all instances of mixed tab-space indentation - Clean up sparse build errors - Add appropriate static's Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Miscellaneous Bug FixesJames Smart
- Fix vport ndlp ref counting errors - Fix use after free of ndlp structure - Use the correct flag to check for LOADING setting. - Fix driver unload bugs (related to shost references) after link down or rscn - Fix up HBQ initialization - Fix port_list locking around driver unload. - Fix references to hostdata as a phba - Fix GFFID type offset to work correctly with big endian structure. - Only call pci_disable_msi if the pci_enable_msi succeeded - Fix vport_delete wait/fail if in discovery - Put a reference on the nameservers ndlp when performing CT traffic. - Remove unbalanced hba unlock. - Fix up HBQ processing - Fix lpfc debugfs discovery trace output for ELS rsp cmpl - Send ADISC when rpi is 0 - Stop FDISC retrying forever - Unable to retrieve correct config parameter for vport - Fix sli_validate_fcp_iocb, sli_sum_iocb, sli_abort_iocb to be vport-aware. - Fix index-out-of-range error in iocb. Spotted by Coverity. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Miscellaneous management and logging modsJames Smart
- Remove the "management_version" sysfs parameter (was unused) - Add HBQ information to lpfc debugfs - Change lpfc_npiv_enable name back to lpfc_enable_npiv (internal stds) - Remove "issue_lip" attribute from the vports transport template Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Rework the lpfc_printf_log() macroJames Smart
Rework the lpfc_printf_log() macro so that logging is enabled on a per-vport basis. Used to be on a physical-port basis, thus logging with large numbers of vports became a mess. Required redefinition of the macro, and an update of every use. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Attribute and Parameter splits for vport and physical portJames Smart
- Split attributes up into vport and non-vport attributes. - Move vport specific cfg params to vport Many of the vport-specific behaviors were still global attributes on the physical port. Move them to the vport itself. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_listJames Smart
Cleans up a lot of bad behaviors that have been in this area a while Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01[SCSI] lpfc 8.2.2 : Error messages and debugfs updatesJames Smart
Error messages and debugfs updates: - Fix up GID_FT error messages - Enhance debugfs with slow_ring_trace, dumpslim and nodelist information - Add log type (and messages) for vport state changes - Enhance log messages when retries ELS fail Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01SCTP: IPv4 mapped addr not returned in SCTPv6 accept()Vlad Yasevich
When issuing a connect call on an AF_INET6 sctp socket with a IPv4-mapped destination, the peer address that is returned by getpeeraddr() should be v4-mapped as well. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-01SCTP: IPv4 mapped addr not returned in SCTPv6 accept()Dave Johnson
An accept() call on a SCTPv6 socket that returns due to connection of a IPv4 mapped peer will fill out the 'struct sockaddr' with a zero IPv6 address instead of the IPv4 mapped address of the peer. This is due to the v4mapped flag not getting copied into the new socket on accept() as well as a missing check for INET6 socket type in sctp_v4_to_sk_*addr(). Signed-off-by: Dave Johnson <djohnson@sw.starentnetworks.com> Cc: Srinivas Akkipeddi <sakkiped@starentnetworks.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-01sctp: fix shadow symbol in net/sctp/tsnmap.cSebastian Siewior
net/sctp/tsnmap.c:164:16: warning: symbol '_end' shadows an earlier one include/asm-generic/sections.h:13:13: originally declared here Renamed renamed _end to end_ and _start (for consistence). Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-01sctp: try to fix readlockSebastian Siewior
unlock the reader lock in error case. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-01sctp: remove shadowed symbolssebastian@breakpoint.cc
Fixes the following sparse warnings: net/sctp/sm_make_chunk.c:1457:9: warning: symbol 'len' shadows an earlier one net/sctp/sm_make_chunk.c:1356:23: originally declared here net/sctp/socket.c:1534:22: warning: symbol 'chunk' shadows an earlier one net/sctp/socket.c:1387:20: originally declared here Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-01sctp: move global declaration to header file.sebastian@breakpoint.cc
sctp_chunk_cachep & sctp_bucket_cachep is used module global, so move it to a header file. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-01sctp: make locally used function staticsebastian@breakpoint.cc
Forward declarion is static, the function itself is not. Make it consistent. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-01pata_sis: fix MWDMA for <= UDMA66 chipsets and UDMA for UDMA33 chipsetsBartlomiej Zolnierkiewicz
* Fix MWDMA timings setup in sis_old_set_dmamode() and sis_66_set_dmamode(). The old timings were overclocked (even worse behavior than sis5513 IDE driver which depends on BIOS to program correct timings), the new timings are taken from the datasheet (they match timings from ATA spec). * Fix UDMA timings setup in sis_old_set_dmamode(). Misplaced pci_write_config_word() call resulted in UDMA timings never being set. * Fix comments for sis_133_early_set_dmamode() and sis_133_set_dmamode(): - only the former function handles early SiS 961 bridges - both functions lack MWDMA timings setup * Fix typos in sis_100_set_piomode() and sis_133_set_piomode() comments. * Bump driver version. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01libata: blacklist SAMSUNG HD401LJ / ZZ100-15 for NCQTejun Heo
SAMSUNG HD401LJ / ZZ100-15 does spurious completion of NCQ commands. Disable NCQ. Reported by Ulrich in bugzilla #8805. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Ulrich <stellplatz-nr.13a@datenparkplatz.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01ata_piix: add Tecra M3 to broken suspend blacklistTejun Heo
Add Tecra M3 to the broken suspend blacklist. Tecra M3 doesn't have proper DMI_PRODUCT_NAME but has an OEM_STRING instead. Match it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01ata_piix: implement piix_borken_suspend()Tejun Heo
Separate out broken suspend blacklist matching into piix_broken_suspend(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01pci: rename __pci_reenable_device() to pci_reenable_device()Tejun Heo
Rename __pci_reenable_device() to pci_reenable_device(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01libata-sff; Unbreak non DMA capable controllers againAlan Cox
Seems nobody else is checking/testing this case as it keeps getting horked. If we have no BAR4 mapping on an SFF controller this is *NOT* an error, it just means it isn't doing BMDMA. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01pata_cmd64x: Correct the speed rangesAlan Cox
I must have been half asleep when doing the original code Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01[SCSI] initialize shost_data to zeroFUJITA Tomonori
It's better to initialize host->shost_data to zero like target->starget_data and device->sdev_data. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-01sh: Fix SH-X3 FPU exception handling.Paul Mundt
SH-X3 has the FPU exceptions on different vectors completely, patch in do_fpu_state_restore() to the proper vectors. Results in a much happier userspace. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-01sh: Fix pgd mismatch from cached TTB in unhandled fault.Paul Mundt
When reading the cached TTB value and extracting the pgd, we accidentally applied a __va() to it and bumped it off in to bogus space which ended up causing multiple faults in the error path. Fix it up so unhandled faults don't do strange and highly unorthodox things when oopsing. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-17 13:33:28 +0000