| Age | Commit message (Collapse) | Author |
|---|
|
Tune bdi.ra_pages to be a multiple of the rsize. This prevents the VFS
from asking for pages that require small reads to satisfy.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
Currently we cap the rsize at a value that fits in CIFSMaxBufSize. That's
not needed any longer for readpages. Allow the use of larger values for
readpages. cifs_iovec_read and cifs_read however are still limited to the
CIFSMaxBufSize. Make sure they don't exceed that.
The patch also changes the rsize defaults. The default when unix
extensions are enabled is set to 1M for parity with the wsize, and there
is a hard cap of ~16M.
When unix extensions are not enabled, the default is set to 60k. According
to MS-CIFS, Windows servers can only send a max of 60k at a time, so
this is more efficient than requesting a larger size. If the user wishes
however, the max can be extended up to 128k - the length of the READ_RSP
header.
Really old servers however require a special hack to ensure that we don't
request too large a read.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
Now that we have code in place to do asynchronous reads, convert
cifs_readpages to use it. The new cifs_readpages walks the page_list
that gets passed in, locks and adds the pages to the pagecache and
sets up cifs_readdata to handle the reads.
The rest is handled by the cifs_async_readv infrastructure.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
...which will allow cifs to do an asynchronous read call to the server.
The caller will allocate and set up cifs_readdata for each READ_AND_X
call that should be issued on the wire. The pages passed in are added
to the pagecache, but not placed on the LRU list yet (as we need the
page->lru to keep the pages on the list in the readdata).
When cifsd identifies the mid, it will see that there is a special
receive handler for the call, and use that to receive the rest of the
frame. cifs_readv_receive will then marshal up a kvec array with
kmapped pages from the pagecache, which eliminates one copy of the
data. Once the data is received, the pages are added to the LRU list,
set uptodate, and unlocked.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
There is no pad, and it simplifies the code to remove the "Data" field.
None of the existing code relies on these fields, or on the READ_RSP
being a particular length.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
In order to handle larger SMBs for readpages and other calls, we want
to be able to read into a preallocated set of buffers. Rather than
changing all of the existing code to preallocate buffers however, we
instead add a receive callback function to the MID.
cifsd will call this function once the mid_q_entry has been identified
in order to receive the rest of the SMB. If the mid can't be identified
or the receive pointer is unset, then the standard 3rd phase receive
function will be called.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
Move the entire 3rd phase of the receive codepath into a separate
function in preparation for the addition of a pluggable receive
function.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
In order to receive directly into a preallocated buffer, we need to ID
the mid earlier, before the bulk of the response is read. Call the mid
finding routine as soon as we're able to read the mid.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
We have several functions that need to access these pointers. Currently
that's done with a lot of double pointer passing. Instead, move them
into the TCP_Server_Info and simplify the handling.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
Change find_cifs_mid to only return NULL if a mid could not be found.
If we got part of a multi-part T2 response, then coalesce it and still
return the mid. The caller can determine the T2 receive status from
the flags in the mid.
With this change, there is no need to pass a pointer to "length" as
well so just pass by value. If a mid is found, then we can just mark
it as malformed. If one isn't found, then the value of "length" won't
change anyway.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
Begin breaking up find_cifs_mid into smaller pieces. The parts that
coalesce T2 responses don't really need to be done under the
GlobalMid_lock anyway. Create a new function that just finds the
mid on the list, and then later takes it off the list if the entire
response has been received.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
Have the demultiplex thread receive just enough to get to the MID, and
then find it before receiving the rest. Later, we'll use this to swap
in a preallocated receive buffer for some calls.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
Having to continually allocate a new kvec array is expensive. Allocate
one that's big enough, and only reallocate it as needed.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
Eventually we'll want to allow cifsd to read data directly into the
pagecache. In order to do that we'll need a routine that can take a
kvec array and pass that directly to kernel_recvmsg.
Unfortunately though, the kernel's recvmsg routines modify the kvec
array that gets passed in, so we need to use a copy of the kvec array
and refresh that copy on each pass through the loop.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
Smatch complains that the cast to "int" in min_t() changes very large
values of current_read_size into negative values and so min_t()
could return the wrong value. I removed the const as well, as that
doesn't do anything here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Now build security descriptor to change either owner or group at the
server. Initially security descriptor was built to change only
(D)ACL, that functionality has been extended.
When either an Owner or a Group of a file object at the server is changed,
rest of security descriptor remains same (DACL etc.).
To set security descriptor, it is necessary to open that file
with permission bits of either WRITE_DAC if DACL is being modified or
WRITE_OWNER (Take Ownership) if Owner or Group is being changed.
It is the server that decides whether a set security descriptor with
either owner or group change succeeds or not.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
that let us do local lock checks before requesting to the server.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Rename it for better clarity as to what it does and have the caller pass
in just the single type byte. Turn the if statement into a switch and
optimize it by placing the most common message type at the top. Move the
header length check back into cifs_demultiplex_thread in preparation
for adding a new receive phase and normalize the cFYI messages.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Split cifs_lock into several functions and let CIFSSMBLock get pid
as an argument.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
..the length field has only 17 bits.
Cc: <stable@kernel.org>
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Move the iovec handling entirely into read_from_socket. That simplifies
the code and gets rid of the special handling for header reads. With
this we can also get rid of the "goto incomplete_rcv" label in the main
demultiplex thread function since we can now treat header and non-header
receives the same way.
Also, make it return an int (since we'll never receive enough to worry
about the sign bit anyway), and simply make it return the amount of bytes
read or a negative error code.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Add data structures and functions necessary to map a uid and gid to SID.
These functions are very similar to the ones used to map a SID to uid and gid.
This time, instead of storing sid to id mapping sorted on a sid value,
id to sid is stored, sorted on an id.
A cifs upcall sends an id (uid or gid) and expects a SID structure
in return, if mapping was done successfully.
A failed id to sid mapping to EINVAL.
This patchset aims to enable chown and chgrp commands when
cifsacl mount option is specified, especially to Windows SMB servers.
Currently we can't do that. So now along with chmod command,
chown and chgrp work.
Winbind is used to map id to a SID. chown and chgrp use an upcall
to provide an id to winbind and upcall returns with corrosponding
SID if any exists. That SID is used to build security descriptor.
The DACL part of a security descriptor is not changed by either
chown or chgrp functionality.
cifs client maintains a separate caches for uid to SID and
gid to SID mapping. This is similar to the one used earlier
to map SID to id (as part of ID mapping code).
I tested it by mounting shares from a Windows (2003) server by
authenticating as two users, one at a time, as Administrator and
as a ordinary user.
And then attempting to change owner of a file on the share.
Depending on the permissions/privileges at the server for that file,
chown request fails to either open a file (to change the ownership)
or to set security descriptor.
So it all depends on privileges on the file at the server and what
user you are authenticated as at the server, cifs client is just a
conduit.
I compared the security descriptor during chown command to that
what smbcacls sends when it is used with -M OWNNER: option
and they are similar.
This patchset aim to enable chown and chgrp commands when
cifsacl mount option is specified, especially to Windows SMB servers.
Currently we can't do that. So now along with chmod command,
chown and chgrp work.
I tested it by mounting shares from a Windows (2003) server by
authenticating as two users, one at a time, as Administrator and
as a ordinary user.
And then attempting to change owner of a file on the share.
Depending on the permissions/privileges at the server for that file,
chown request fails to either open a file (to change the ownership)
or to set security descriptor.
So it all depends on privileges on the file at the server and what
user you are authenticated as at the server, cifs client is just a
conduit.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Suresh had a typo in his recent patch adding information on
the new oplock_endabled parm. Should be documented as in
directory /sys/module/cifs/parameters not /proc/module/cifs/parameters
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Remove unsed #if 0 encryption code.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Add mount options backupuid and backugid.
It allows an authenticated user to access files with the intent to back them
up including their ACLs, who may not have access permission but has
"Backup files and directories user right" on them (by virtue of being part
of the built-in group Backup Operators.
When mount options backupuid is specified, cifs client restricts the
use of backup intents to the user whose effective user id is specified
along with the mount option.
When mount options backupgid is specified, cifs client restricts the
use of backup intents to the users whose effective user id belongs to the
group id specified along with the mount option.
If an authenticated user is not part of the built-in group Backup Operators
at the server, access to such files is denied, even if allowed by the client.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
The plan is to deprecate this interface by kernel version 3.4.
Changes since v1
- add a '\n' to the printk.
Reported-by: Alexander Swen <alex@swen.nu>
Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Reported-by: Alexander Swen <alex@swen.nu>
Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Thus spake Jeff Layton:
"Making that a module parm would allow you to set that parameter at boot
time without needing to add special startup scripts. IMO, all of the
procfile "switches" under /proc/fs/cifs should be module parms
instead."
This patch doesn't alter the default behavior (Oplocks are enabled by
default).
To disable oplocks when loading the module, use
modprobe cifs enable_oplocks=0
(any of '0' or 'n' or 'N' conventions can be used).
To disable oplocks at runtime using the new interface, use
echo 0 > /sys/module/cifs/parameters/enable_oplocks
The older /proc/fs/cifs/OplockEnabled interface will be deprecated
after two releases. A subsequent patch will add an warning message
about this deprecation.
Changes since v2:
- make enable_oplocks a 'bool'
Changes since v1:
- eliminate the use of extra variable by renaming the old one to
enable_oplocks and make it an 'int' type.
Reported-by: Alexander Swen <alex@swen.nu>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
If the server stops sending data while in the middle of sending a
response then we still want to reconnect it if it doesn't come back.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
If msg_controllen is 0, then the socket layer should never touch these
fields. Thus, there's no need to continually reset them. Also, there's
no need to keep this field on the stack for the demultiplex thread, just
make it a local variable in read_from_socket.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
We have two versions of signature generating code. A vectorized and
non-vectorized version. Eliminate a large chunk of cut-and-paste
code by turning the non-vectorized version into a wrapper around the
vectorized one.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
The variable names in this function are so ambiguous that it's very
difficult to know what it's doing. Rename them to make it a bit more
clear.
Also, remove a redundant length check. cifsd checks to make sure that
the rfclen isn't larger than the maximum frame size when it does the
receive.
Finally, change checkSMB to return a real error code (-EIO) when
it finds an error. That will help simplify some coming changes in the
callers.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
server->maxBuf is the maximum SMB size (including header) that the
server can handle. CIFSMaxBufSize is the maximum amount of data (sans
header) that the client can handle. Currently maxBuf is being capped at
CIFSMaxBufSize + the max headers size, and the two values are used
somewhat interchangeably in the code.
This makes little sense as these two values are not related at all.
Separate them and make sure the code uses the right values in the right
places.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
It should be 'CONFIG_CIFS_NFSD_EXPORT'. No-one noticed because that
symbol depends on BROKEN.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
...it's more efficient since we know the length.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
...as that's more efficient when we know that the lengths are equal.
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Commit d39454ffe4a3c85428483b8a8a8e5e797b6363d5 adds a strictcache mount
option. This patch allows the display of this mount option in
/proc/mounts when listing shares mounted with the strictcache mount
option.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
* git://git.samba.org/sfrench/cifs-2.6:
[CIFS] Fix first time message on mount, ntlmv2 upgrade delayed to 3.2
|
|
* 'fixes' of git://git.linaro.org/people/arnd/arm-soc:
ARM: mach-ux500: enable fix for ARM errata 754322
ARM: OMAP: musb: Remove a redundant omap4430_phy_init call in usb_musb_init
ARM: OMAP: Fix i2c init for twl4030
ARM: OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1
|
|
This fixes a compilation error in cpu-tegra.c which was introduced in
dc8d966bccde ("ARM: convert PCI defines to variables") which removed the
now obsolete mach/hardware.h from the mach-tegra subtree.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon/kms: use hardcoded dig encoder to transmitter mapping for DCE4.1
drm/radeon/kms: fix dp_detect handling for DP bridge chips
drm/radeon/kms: retry aux transactions if there are status flags
|
|
A couple of changes to the Tegra maintainership setup:
I'm very glad to bring on Stephen Warren on board as a maintainer. The
work he has done so far is excellent, and the fact that he works for
Nvidia means he has long-term interest in the platform.
Erik Gilling did an astounding amount of work on getting things up and
running but has been a silent partner on the maintainership side for a
while, and is stepping down. Thanks for your contributions so far, Erik.
Finally, update the git URL since I'll take over running the main repo
for a while.
Overall maintainership model isn't changing much at this time: We'll all
three review patches as appropriate, and one of us will collect the main
repo (me at this time).
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Erik Gilling <konkers@android.com>
Acked-by: Colin Cross <ccross@android.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (29 commits)
MIPS: Call oops_enter, oops_exit in die
staging/octeon: Software should check the checksum of no tcp/udp packets
MIPS: Octeon: Enable C0_UserLocal probing.
MIPS: No branches in delay slots for huge pages in handle_tlbl
MIPS: Don't clobber CP0_STATUS value for CONFIG_MIPS_MT_SMTC
MIPS: Octeon: Select CONFIG_HOLES_IN_ZONE
MIPS: PM: Use struct syscore_ops instead of sysdevs for PM (v2)
MIPS: Compat: Use 32-bit wrapper for compat_sys_futex.
MIPS: Do not use EXTRA_CFLAGS
MIPS: Alchemy: DB1200: Disable cascade IRQ in handler
SERIAL: Lantiq: Set timeout in uart_port
MIPS: Lantiq: Fix setting the PCI bus speed on AR9
MIPS: Lantiq: Fix external interrupt sources
MIPS: tlbex: Fix build error in R3000 code.
MIPS: Alchemy: Include Au1100 in PM code.
MIPS: Alchemy: Fix typo in MAC0 registration
MIPS: MSP71xx: Fix build error.
MIPS: Handle __put_user() sleeping.
MIPS: Allow forced irq threading
MIPS: i8259: Mark cascade interrupt non-threaded
...
|
|
|
|
Microsoft has a bug with ntlmv2 that requires use of ntlmssp, but
we didn't get the required information on when/how to use ntlmssp to
old (but once very popular) legacy servers (various NT4 fixpacks
for example) until too late to merge for 3.1. Will upgrade
to NTLMv2 in NTLMSSP in 3.2
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
|
|
This applies ARM errata fix 754322 for all ux500 platforms.
Cc: stable@kernel.org
Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
* git://github.com/davem330/net:
net: fix typos in Documentation/networking/scaling.txt
bridge: leave carrier on for empty bridge
netfilter: Use proper rwlock init function
tcp: properly update lost_cnt_hint during shifting
tcp: properly handle md5sig_pool references
macvlan/macvtap: Fix unicast between macvtap interfaces in bridge mode
|
|
In summary, this DMI quirk uses the _CRS info by default for the ASUS
M2V-MX SE by turning on `pci=use_crs` and is similar to the quirk
added by commit 2491762cfb47 ("x86/PCI: use host bridge _CRS info on
ASRock ALiveSATA2-GLAN") whose commit message should be read for further
information.
Since commit 3e3da00c01d0 ("x86/pci: AMD one chain system to use pci
read out res") Linux gives the following oops:
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
HDA Intel 0000:20:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:20:01.0: setting latency timer to 64
BUG: unable to handle kernel paging request at ffffc90011c08000
IP: [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel]
PGD 13781a067 PUD 13781b067 PMD 1300ba067 PTE 800000fd00000173
Oops: 0009 [#1] SMP
last sysfs file: /sys/module/snd_pcm/initstate
CPU 0
Modules linked in: snd_hda_intel(+) snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event tpm_tis tpm snd_seq tpm_bios psmouse parport_pc snd_timer snd_seq_device parport processor evdev snd i2c_viapro thermal_sys amd64_edac_mod k8temp i2c_core soundcore shpchp pcspkr serio_raw asus_atk0110 pci_hotplug edac_core button snd_page_alloc edac_mce_amd ext3 jbd mbcache sha256_generic cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod raid1 md_mod usbhid hid sg sd_mod crc_t10dif sr_mod cdrom ata_generic uhci_hcd sata_via pata_via libata ehci_hcd usbcore scsi_mod via_rhine mii nls_base [last unloaded: scsi_wait_scan]
Pid: 1153, comm: work_for_cpu Not tainted 2.6.37-1-amd64 #1 M2V-MX SE/System Product Name
RIP: 0010:[<ffffffffa0578402>] [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel]
RSP: 0018:ffff88013153fe50 EFLAGS: 00010286
RAX: ffffc90011c08000 RBX: ffff88013029ec00 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246
RBP: ffff88013341d000 R08: 0000000000000000 R09: 0000000000000040
R10: 0000000000000286 R11: 0000000000003731 R12: ffff88013029c400
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88013341d090
FS: 0000000000000000(0000) GS:ffff8800bfc00000(0000) knlGS:00000000f7610ab0
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffc90011c08000 CR3: 0000000132f57000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process work_for_cpu (pid: 1153, threadinfo ffff88013153e000, task ffff8801303c86c0)
Stack:
0000000000000005 ffffffff8123ad65 00000000000136c0 ffff88013029c400
ffff8801303c8998 ffff88013341d000 ffff88013341d090 ffff8801322d9dc8
ffff88013341d208 0000000000000000 0000000000000000 ffffffff811ad232
Call Trace:
[<ffffffff8123ad65>] ? __pm_runtime_set_status+0x162/0x186
[<ffffffff811ad232>] ? local_pci_probe+0x49/0x92
[<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b
[<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b
[<ffffffff8105afd0>] ? do_work_for_cpu+0xb/0x1b
[<ffffffff8105fd3f>] ? kthread+0x7a/0x82
[<ffffffff8100a824>] ? kernel_thread_helper+0x4/0x10
[<ffffffff8105fcc5>] ? kthread+0x0/0x82
[<ffffffff8100a820>] ? kernel_thread_helper+0x0/0x10
Code: f4 01 00 00 ef 31 f6 48 89 df e8 29 dd ff ff 85 c0 0f 88 2b 03 00 00 48 89 ef e8 b4 39 c3 e0 8b 7b 40 e8 fc 9d b1 e0 48 8b 43 38 <66> 8b 10 66 89 14 24 8b 43 14 83 e8 03 83 f8 01 77 32 31 d2 be
RIP [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel]
RSP <ffff88013153fe50>
CR2: ffffc90011c08000
---[ end trace 8d1f3ebc136437fd ]---
Trusting the ACPI _CRS information (`pci=use_crs`) fixes this problem.
$ dmesg | grep -i crs # with the quirk
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
The match has to be against the DMI board entries though since the vendor entries are not populated.
DMI: System manufacturer System Product Name/M2V-MX SE, BIOS 0304 10/30/2007
This quirk should be removed when `pci=use_crs` is enabled for machines
from 2006 or earlier or some other solution is implemented.
Using coreboot [1] with this board the problem does not exist but this
quirk also does not affect it either. To be safe though the check is
tightened to only take effect when the BIOS from American Megatrends is
used.
15:13 < ruik> but coreboot does not need that
15:13 < ruik> because i have there only one root bus
15:13 < ruik> the audio is behind a bridge
$ sudo dmidecode
BIOS Information
Vendor: American Megatrends Inc.
Version: 0304
Release Date: 10/30/2007
[1] http://www.coreboot.org/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=30552
Cc: stable@kernel.org (2.6.34)
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
