summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2008-01-25V4L/DVB (6743): cx25840: fix endianness inconsistencyHans Verkuil
cx25840_read4 reads a little-endian 32-bit value whereas cx25840_write4 writes the 32-bit value as big-endian. Convert write4 to use little-endian as well (that's the correct endianness). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6742): ivtv: fix incorrect debug messageHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6741): cx2341x: codingstyle cleanupsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6740): tlv320aic23b: codingstyle cleanupsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6739): cs53l32a: codingstyle cleanupsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6738): wm8739: codingstyle cleanupsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6737): wm8775: codingstyle cleanupHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6736): Fix some errors at the video_ioctl2 conversionMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6735): Reorder functions to make easier to compare with the ↵Mauro Carvalho Chehab
previous code After this patch, the order of the functions will be the same as before the patch converting the driver to user video_ioctl2. This makes easier to diff between the previous version and the newer one. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6734): Converted saa7134-video to use video_ioctl2Douglas Schilling Landgraf
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6732): dsbr100 violates DMA coherency rulesOliver Neukum
Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6731): ivtv: Remove a invalid shadow-variableRichard Knutsson
Remove the shadowing 'struct v4l2_chip_ident *chip', since it already exists and makes the if-statement useless. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6728): tda18271: fix register dump formatMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6727): tda18271: convert table lookup loops to functionsMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6726): tda18271: set image rejection validityMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6725): tda18271: improve debug flexibilityMichael Krufky
converted debug module option to an or-able setting. 1 = info 2 = table map values 4 = register dumps Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6724): tda18271: remove duplicated codeMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6723): tda18271: only force init once during attachMichael Krufky
Once the image rejection calibration procedure has been successful, we should not initialize the tuner registers again. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6719): ivtv: ivtv-yuv clean-up + source cropping bug-fixIan Armstrong
ivtv-yuv code clean up & reformat. Includes minor changes to some debug lines. Also fixes a bug found during the reformatting, which would cause the incorrect amount of yuv data to be sent to the card if source cropping coordinates were used. Apart from the bug-fix, there should be no functional difference to the previous version. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6718): ivtv: ivtv yuv format description correctionIan Armstrong
The driver was incorrectly reporting that it supported YUV 4:2:2 output, when it is actually YUV 4:2:0. Though I believe the hardware can be pushed to 4:2:2, we don't currently support that. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6717): ivtv: Initial merge of video48 yuv handling into the ↵Ian Armstrong
IVTV_IOC_DMA_FRAME framework Previously, all yuv data written to /dev/video48 had only basic support with no double buffering to avoid display tearing. With this patch, yuv frames written to video48 are now handled by the existing IVTV_IOC_DMA_FRAME framework. As such, the frames are hardware buffered to avoid tearing, and honour scaling mode & field order options. Unlike the proprietary IVTV_IOC_DMA_FRAME ioctl, all parameters are controlled by the V4L2 API. Due to mpeg & yuv output restrictions being different, their V4L2 output controls have been separated. To control the yuv output, the V4L2 calls must be done via video48. If the ivtvfb module is loaded, there will be one side effect to this merge. The yuv output window will be constrained to the visible framebuffer area. In the event that a virtual framebuffer size is being used, the limit to the output size will be the virtual dimensions, but only the portion that falls within the currently visible area of the framebuffer will be shown. Like the IVTV_IOC_DMA_FRAME ioctl, the supplied frames must be padded to 720 pixels wide. However the height must only be padded up the nearest multiple of 32. This would mean an image of 102 lines must be padded to 128. As long as the true source image size is given, the padding will not be visible in the final output. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6716): ivtv: yuv interlace mode changeIan Armstrong
Interlace mode selection code moved into the frame setup phase, so it's now run before the frame is loaded into a hardware buffer. Given that it can affect how a new frame is displayed, it was a bit stupid running it after the frame was already visible. A few stray interlace related variables which were linked to individual frames have now been moved into the yuv_frame_info struct. This means that all variables linked to a specific frame are in the same place & not scattered. Minor code reformatting in areas touched by the above changes. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6715): ivtv: Remove unnecessary register updateIan Armstrong
To reduce the number of display register accesses, the yuv code keeps track of the current video settings. Should there be a change in any single parameter, it will update the associated display registers to ensure everything is displayed correctly. The existing check also looks at the field order for the video. This is not required, since field reversal does not require any display register changes. This patch removes the field order from the check. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6714): ivtv: yuv frame parameter fixIan Armstrong
Inadvertently missed a line when converting code to new hardware buffering method. In some circumstances, this would lead to a frame being displayed using parameters belonging to another frame. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6713): ivtv: ivtv_yuv_prep_frame breakup and yuv hardware buffer ↵Ian Armstrong
changes ivtv_yuv_prep_frame is split in smaller code blocks. Modified yuv buffer handling on the PVR350 itself. We now cycle through all 8 hardware buffers. With this patch in place, driver behaviour should remain unchanged from the existing release. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6712): ivtv: ivtv yuv stream handling changeIan Armstrong
Currently the yuv output stream buffer is divided into blocks whose size depend on the broadcast standard selected during the driver init phase. However, the standard can be changed after the init phase. This effectively breaks the yuv output stream handler, since it relies on the different yuv planes being block aligned. This patch changes the setup, so that the block size is always the same. The decoder dma function has been modified to cope with the fact that the second yuv plane may no longer be block aligned. The start of the yuv frame must still be at the beginning of a block, so the stream write function has also been modified to ensure this is always true. Also, the stream write function will now initiate a yuv dma transfer as soon as a full frame is ready. It will not wait until the current write request has completed, or the stream buffer becomes full. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6710): pvrusb2: Recognize ATSC video standard bit valuesMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6709): pvrusb2: minor rework for default video standard handlingMike Isely
pvrusb2: When a per-device-type default video standard is declared, handle it in such a way that it can be correctly and unambiguously reported in the system log. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6708): pvrusb2: Expand comment in device attributes descriptionMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6707): pvrusb2: Remove use of volatile in pipeline control state ↵Mike Isely
machine pvrusb2: Eliminate use of volatile in pipeline control state variables. These were all cases of paranoia; upon further review the overall mechanism employed here should not require use of volatile. This had originally been done out of paranoia, and I have since been convinced that the paranoia is not required. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6706): pvrusb2: Remove use of volatile in command sequencerMike Isely
pvrusb2: Remove use of volatile for command sequencer; these variables are set by interrupt-context code and we check their state in such a manner that there should be no race conditions. This had originally been done out of paranoia, and I have since been convinced that the paranoia is not required. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6705): pvrusb2: Implement default standard selection based on ↵Mike Isely
device type This adds a default video standard setting to the pvr2_device_desc structure for describing device types. With this change it is possible to set a reasonable default standard based on device type. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6703): pvrusb2: Change division to bit-or for tveeprom standardsRoel Kluin
Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6702): pvrusb2: fix typo in commentsMichael Krufky
Firmware file name(s) for 24xxx devices Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6701): pvrusb2: Enable support for "GOTVIEW USB2.0 DVD2" hardwareMike Isely
This changeset allows the pvrusb2 driver to operate a new device type ("GOTVIEW USB2.0 DVD2"). Changes amount to defining a new routing scheme for the device and adding appropriate table entries into pvrusb2-devattr.c. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6700): pvrusb2: Soften the crashed encoder warning messageMike Isely
The pvrusb2 driver has been successfully recovering from a crashed encoder now for over 2 years. I think it's time to reduce the perceived severity of the warning message. While I'd still very much like to stop these crashes, the recovery logic is solid enough that the problem is effectively benign. No point in panicing the users over it. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6699): pvrusb2: Use of virtual IR chip is a device-specific attributeMike Isely
For Hauppauge 24xxx devices, the IR receiver is a custom piece of logic that is very specific to the device. The pvrusb2 driver can virtualize this to make it look like a more normal IR receiver found in other Hauppauge devices. The decision of whether or not to enable this virtualization however is a device-specific attribute, thus this changeset. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6698): pvrusb2: Implement signal routing schemesMike Isely
The exact routing of video and audio signals within a device is a device-specific attribute. Hauppauge devices do it one way; other types of device may route things differently. Unfortunately it is rather impractical to define chip-specific routing at the device attribute level, so instead what happens here is that "schemes" are defined. Each chip level interface implements its part of a given scheme and the scheme as a whole is made into a device specific attribute controlled via a table entry in pvrusb2-devattr.c. The only scheme defined here is for Hauppauge devices, but clearly this opens the door for other possibilities to follow. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6697): pvrusb2: Existence of Hauppauge ROM is a device-specific ↵Mike Isely
attribute Arrange so that the pvrusb2 driver can optionally work without a Hauppauge ROM being present - which is fairly important for devices that happen to not come from Hauppauge. The expected existence of a Hauppauge ROM is now a device attribute. The tuner type is now also a device attribute, which is consulted if there is no ROM. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6696): pvrusb2: Miscellaneous tweaks for controlling tuner type and ↵Mike Isely
video standard Correctly mark when a tuner type is set. Report more faithfully information about known supported device video standards. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6695): pvrusb2: Implement functions to pass descriptive hardware infoMike Isely
Implement additional pvrusb2 device info table entries for a device identifier and a device description. Export this information via the driver's internal API. Make this information available via the sysfs driver interface. Also propagate this information into the v4l2 capability structure. An app can now retrieve and report a descriptive string about the particular type of hardware device it is operating. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6694): pvrusb2: Remove obsolete global hardware type enumerationMike Isely
Device-specific driver behavior is now defined by generic device characteristics rather than by specific device model information. With this change, the hardware type field can go away, thus this change. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6693): pvrusb2: Add pvrusb2-devattr.o to driver buildMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6692): pvrusb2: Centralize device specific attributes into a single ↵Mike Isely
place The pvrusb2 driver currently supports two variants of the Hauppauge PVR USB2. However there are other hardware types potentially supportable, but the driver at the moment is not structured to make it easy to describe these minor variations. This changeset is the first set of changes to make such additional device support possible. Device attributes are held in several tables all contained within pvrusb2-devattr.c; all other device-specific driver behavior now derives from these tables. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6691): pvrusb2: Rework pipeline state controlMike Isely
This is a new implementation for video pipeline control within the pvrusb2 driver. Actual start/stop of the pipeline is moved to the driver's kernel thread. Pipeline stages are controlled autonomously based on surrounding pipeline or application control state. Kernel thread management is also cleaned up and moved into the internal control structure of the driver, solving a set up / tear down race along the way. Better failure recovery is implemented with this new control strategy. Also with this change comes better control of the cx23416 encoder, building on additional information learned about the peculiarities of controlling this part (this information was the original trigger for this rework). With this change, overall encoder stability should be considerably improved. Yes, this is a large change for this driver, but due to the nature of the feature being worked on, the changes are fairly pervasive and would be difficult to break into smaller pieces with any semblence of step-wise stability. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6688): V4L: fix copy and paste error in dprintk for videobuf-vmalloc.cBrandon Philips
Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6687): saa7134: add mute support for radio/analog-in on MD9717 and ↵Hermann Pitton
MD7134 Currently the saa7134 chips only have mute support for the TV input. Cards with mute from external audio muxes are already fine on the other inputs and some recent tuners mute at least the radio on exit. But these mostly hybrid tuners are not fully backward compatible, since they must power down and mute regardless. For some included above, the MD7134 knows several, to switch on mute/automute to the TV input is functional and backward compatible for the applications, except that the tuners with tda9887 always mute on exit. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6685): ir-keymaps.c: extra keys on winfast Y04G0033 remoteMichel Lespinasse
This change adds support for 4 extra keys on the remote currently being shipped by leadtek with their "WinFast TV2000 XP/Expert" and "WinFast PVR2000" cards. The remote P/N seems to be Y04G0033 and you can see a picture of it here: http://lespinasse.org/y04g0033.jpg The extra keys are at the bottom and are labeled MCE +VOL, -VOL, +CH, -CH. I chose to map them to the F21-F24 keycodes, following the precedent of ir_codes_gotview7135[], so as to differentiate these 'MCE' keys from the other +VOL, -VOL, +CH, -CH 'arrow' keys higher up on the remote. Signed-off-by: Michel Lespinasse <walken@zoy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6683): Fix DVB compatibilityMauro Carvalho Chehab
DVB-S is not supported. Also, there are some QAM6 firmwares for xc3028, but it is reported that this doesn't work fine. Thanks to Manu Abraham, Michael Krufky and Patrick Boettcher for their insights. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6681): tda18271: rename 'debug' to 'tda18271_debug'Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>