| Age | Commit message (Collapse) | Author |
|---|
|
Durring orphan scan, if we are slot 0, and we are replaying
orphan_dir:0001, the general process is that for every file
in this dir:
1. we will iget orphan_dir:0001, since there is no inode for it.
we will have to create an inode and read it from the disk.
2. do the normal work, such as delete_inode and remove it from
the dir if it is allowed.
3. call iput orphan_dir:0001 when we are done. In this case,
since we have no dcache for this inode, i_count will
reach 0, and VFS will have to call clear_inode and in
ocfs2_clear_inode we will checkpoint the inode which will let
ocfs2_cmt and journald begin to work.
4. We loop back to 1 for the next file.
So you see, actually for every deleted file, we have to read the
orphan dir from the disk and checkpoint the journal. It is very
time consuming and cause a lot of journal checkpoint I/O.
A better solution is that we can have another reference for these
inodes in ocfs2_super. So if there is no other race among
nodes(which will let dlmglue to checkpoint the inode), for step 3,
clear_inode won't be called and for step 1, we may only need to
read the inode for the 1st time. This is a big win for us.
So this patch will try to cache system inodes of other slots so
that we will have one more reference for these inodes and avoid
the extra inode read and journal checkpoint.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
generic_check_addressable() erroneously shifts pages down by a block
factor when it should be shifting up. To prevent overflow, we shift
blocks down to pages.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
The OCFS2 developers have already done all of the hard work to allow
volumes larger than 16 TiB. But there is still a "sanity check" in
fs/ocfs2/super.c that prevents the mounting of such volumes, even when
the cluster size and journal options would allow it.
This patch replaces that sanity check with a more sophisticated one to
mount a huge volume provided that (a) it is addressable by the raw
word/address size of the system (borrowing a test from ext4); (b) the
volume is using JBD2; and (c) the JBD2_FEATURE_INCOMPAT_64BIT flag is
set on the journal.
I factored out the sanity check into its own function. I also moved it
from ocfs2_initialize_super() down to ocfs2_check_volume(); any earlier,
and the journal will not have been initialized yet.
This patch is one of a pair, and it depends on the other ("JBD2: Allow
feature checks before journal recovery").
I have tested this patch on small volumes, huge volumes, and huge
volumes without 64-bit block support in the journal. All of them appear
to work or to fail gracefully, as appropriate.
Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Before we start accessing a huge (> 16 TiB) OCFS2 volume, we need to
confirm that its journal supports 64-bit offsets. In particular, we
need to check the journal's feature bits before recovering the journal.
This is not possible with JBD2 at present, because the journal
superblock (where the feature bits reside) is not loaded from disk until
the journal is recovered.
This patch loads the journal superblock in
jbd2_journal_check_used_features() if it has not already been loaded,
allowing us to check the feature bits before journal recovery.
Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Cc: linux-ext4@vger.kernel.org
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
As part of adding support for OCFS2 to mount huge volumes, we need to
check that the sector_t and page cache of the system are capable of
addressing the entire volume.
An identical check already appears in ext3 and ext4. This patch moves
the addressability check into its own function in fs/libfs.c and
modifies ext3 and ext4 to invoke it.
[Edited to -EINVAL instead of BUG_ON() for bad blocksize_bits -- Joel]
Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Cc: linux-ext4@vger.kernel.org
Acked-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
merge-2
|
|
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
ocfs2_sync_inode() is used only from ocfs2_sync_file(). But all data has
already been written before calling ocfs2_sync_file() and ocfs2 doesn't use
inode's private_list for tracking metadata buffers thus sync_mapping_buffers()
is superfluous as well.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Thanks for the comments. I have incorportated them all.
CONFIG_OCFS2_FS_STATS is enabled and CONFIG_DEBUG_LOCK_ALLOC is disabled.
Statistics now look like -
ocfs2_write_ctxt: 2144 - 2136 = 8
ocfs2_inode_info: 1960 - 1848 = 112
ocfs2_journal: 168 - 160 = 8
ocfs2_lock_res: 336 - 304 = 32
ocfs2_refcount_tree: 512 - 472 = 40
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
In ocfs2, actually we don't allow any direct write pass i_size,
see the function ocfs2_prepare_inode_for_write. So we don't
need the bogus simple_setsize.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Now orphan scan worker has no trace log, so it is
very hard to tell whether it is finished or blocked.
So add 2 mlog trace log so that we can tell whether
the current orphan scan worker is blocked or not.
It does help when I analyzed a orphan scan bug.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
The reason why we need this ioctl is to offer the none-privileged
end-user a possibility to get filesys info gathering.
We use OCFS2_IOC_INFO to manipulate the new ioctl, userspace passes a
structure to kernel containing an array of request pointers and request
count, such as,
* From userspace:
struct ocfs2_info_blocksize oib = {
.ib_req = {
.ir_magic = OCFS2_INFO_MAGIC,
.ir_code = OCFS2_INFO_BLOCKSIZE,
...
}
...
}
struct ocfs2_info_clustersize oic = {
...
}
uint64_t reqs[2] = {(unsigned long)&oib,
(unsigned long)&oic};
struct ocfs2_info info = {
.oi_requests = reqs,
.oi_count = 2,
}
ret = ioctl(fd, OCFS2_IOC_INFO, &info);
* In kernel:
Get the request pointers from *info*, then handle each request one bye one.
Idea here is to make the spearated request small enough to guarantee
a better backward&forward compatibility since a small piece of request
would be less likely to be broken if filesys on raw disk get changed.
Currently, the following 7 requests are supported per the requirement from
userspace tool o2info, and I believe it will grow over time:-)
OCFS2_INFO_CLUSTERSIZE
OCFS2_INFO_BLOCKSIZE
OCFS2_INFO_MAXSLOTS
OCFS2_INFO_LABEL
OCFS2_INFO_UUID
OCFS2_INFO_FS_FEATURES
OCFS2_INFO_JOURNAL_SIZE
This ioctl is only specific to OCFS2.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits)
ARM: Update mach-types
ARM: Partially revert "Auto calculate ZRELADDR and provide option for exceptions"
ARM: Ensure PTE modifications via dma_alloc_coherent are visible
ARM: 6359/1: ep93xx: move clock initialization earlier
Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"
ARM: 6352/1: perf: fix event validation
ARM: 6344/1: Mark CPU_32v6K as depended on CPU_V7
ARM: 6343/1: wire up fanotify and prlimit64 syscalls on ARM
ARM: 6330/1: perf: reword comments relating to perf_event_do_pending
ARM: pxa168fb: fix section mismatch
ARM: pxa: Make id const in pwm_probe()
ARM: pxa: fix CI_HSYNC and CI_VSYNC MFP defines for pxa300
ARM: pxa: remove __init from cpufreq_driver->init()
ARM: imx: set cache line size to 64 bytes for i.MX5
mx5/clock: fix clear bit fields issue in _clk_ccgr_disable function
mxc/tzic: add base address when accessing TZIC registers
ARM: mach-shmobile: ap4evb: fix write protect for SDHI1
ARM: mach-shmobile: ap4evb: modify FSI2 ID
ARM: mach-shmobile: do not enable the PLLC2 clock on init
ARM: mach-shmobile: Clock framework comment fix
...
|
|
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
exceptions"
Partially revert e69edc7, which introduced automatic zreladdr
support. The change in the way the manual definition is defined
seems to be error and conflict prone. Go back to the original way
we were handling this for the time being, while keeping the automatic
zreladdr facility.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
|
|
lg_lock_global() currently only acquires spinlocks for online CPUs, but
it's meant to lock all possible CPUs. Lglock-protected resources may be
associated with removed CPUs - and, indeed, that could happen with the
per-superblock open files lists.
At Nick's suggestion, change for_each_online_cpu() to
for_each_possible_cpu() to protect accesses to those resources.
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
So it can be used by all that need to check for that.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
RDMA/nes: Fix hang with modified FIN handling on A0 cards
RDMA/nes: Change state to closing after FIN
RDMA/nes: Fix double CLOSE event indication crash
RDMA/nes: Write correct register write to set TX pause param
RDMA/cxgb3: Don't exceed the max HW CQ depth
|
|
* 'fixes' of git://oss.oracle.com/git/tma/linux-2.6:
ocfs2: Fix orphan add in ocfs2_create_inode_in_orphan
ocfs2: split out ocfs2_prepare_orphan_dir() into locking and prep functions
ocfs2: allow return of new inode block location before allocation of the inode
ocfs2: use ocfs2_alloc_dinode_update_counts() instead of open coding
ocfs2: split out inode alloc code from ocfs2_mknod_locked
Ocfs2: Fix a regression bug from mainline commit(6b933c8e6f1a2f3118082c455eef25f9b1ac7b45).
ocfs2: Fix deadlock when allocating page
ocfs2: properly set and use inode group alloc hint
ocfs2: Use the right group in nfs sync check.
ocfs2: Flush drive's caches on fdatasync
ocfs2: make __ocfs2_page_mkwrite handle file end properly.
ocfs2: Fix incorrect checksum validation error
ocfs2: Fix metaecc error messages
|
|
|
|
Changing state to CLOSING when FIN is received causes A0 cards to
hang. Fix this by checking for A0 cards in FIN handling.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
|
When the driver receives an AE for FIN received, it closes the
connection without changing the state of the connection in the
hardware to closing. By changing the state to closing, hardware will
do a normal close sequence.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
|
During a stress testing in a large cluster, multiple close event are
detected and BUG() is hit in the iWARP core. The cause is that the
active node gave up while waiting for an MPA response from the peer
and tried to close the connection by sending RST. The passive node
driver receives the RST but is waiting for MPA response from the user.
When the MPA accept is received, the driver offloads the connection
and sends a CLOSE event. The driver gets an AE indicating RESET
received and also sends a CLOSE event, hitting a BUG().
Fix this by correcting RESET handling and sending CLOSE events.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
|
Setting TX pause param writes to the wrong register location causing
the adapter to hang. Correct the define used to write the reigster.
Addresses: https://bugs.openfabrics.org/show_bug.cgi?id=2116
Reported-by: Shiri Franchi <shirif@voltaire.com>
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - fix device removal on unload
Input: bcm5974 - adjust major/minor to scale
Input: MT - initialize slots to unused
Input: use PIT_TICK_RATE in vt beep ioctl
Input: wacom - fix mousewheel handling for old wacom tablets
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'semaphore-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
semaphore: Add DEFINE_SEMAPHORE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, mcheck: Avoid duplicate sysfs links/files for thresholding banks
io-mapping: Fix the address space annotations
x86: Fix the address space annotations of iomap_atomic_prot_pfn()
x86, mm: Fix CONFIG_VMSPLIT_1G and 2G_OPT trampoline
x86, hwmon: Fix unsafe smp_processor_id() in thermal_throttle_add_dev
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
gcc-4.6: kernel/*: Fix unused but set warnings
mutex: Fix annotations to include it in kernel-locking docbook
pid: make setpgid() system call use RCU read-side critical section
MAINTAINERS: Add RCU's public git tree
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf, x86: Try to handle unknown nmis with an enabled PMU
perf, x86: Fix handle_irq return values
perf, x86: Fix accidentally ack'ing a second event on intel perf counter
oprofile, x86: fix init_sysfs() function stub
lockup_detector: Sync touch_*_watchdog back to old semantics
tracing: Fix a race in function profile
oprofile, x86: fix init_sysfs error handling
perf_events: Fix time tracking for events with pid != -1 and cpu != -1
perf: Initialize callchains roots's childen hits
oprofile: fix crash when accessing freed task structs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix lock annotations
fuse: flush background queue on connection close
|
|
Dave Hylands reports:
| We've observed a problem with dma_alloc_writecombine when the system
| is under heavy load (heavy bus traffic). We've managed to reduce the
| problem to the following snippet, which is run from a kthread in a
| continuous loop:
|
| void *virtAddr;
| dma_addr_t physAddr;
| unsigned int numBytes = 256;
|
| for (;;) {
| virtAddr = dma_alloc_writecombine(NULL,
| numBytes, &physAddr, GFP_KERNEL);
| if (virtAddr == NULL) {
| printk(KERN_ERR "Running out of memory\n");
| break;
| }
|
| /* access DMA memory allocated */
| tmp = virtAddr;
| *tmp = 0x77;
|
| /* free DMA memory */
| dma_free_writecombine(NULL,
| numBytes, virtAddr, physAddr);
|
| ...sleep here...
| }
|
| By itself, the code will run forever with no issues. However, as we
| increase our bus traffic (typically using DMA) then the *tmp = 0x77
| line will eventually cause a page fault. If we add a small delay (a
| few microseconds) before the *tmp = 0x77, then we don't see a page
| fault, even under heavy load.
A dsb() is required after modifying the PTE entries to ensure that they
will always be visible. Add this dsb().
Reported-by: Dave Hylands <dhylands@gmail.com>
Tested-by: Dave Hylands <dhylands@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The full cleanup of init_MUTEX[_LOCKED] and DECLARE_MUTEX has not been
done. Some of the users are real semaphores and we should name them as
such instead of confusing everyone with "MUTEX".
Provide the infrastructure to get finally rid of init_MUTEX[_LOCKED]
and DECLARE_MUTEX.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
LKML-Reference: <20100907125054.795929962@linutronix.de>
|
|
Commit 7cfe24947 ("ARM: AMBA: Add pclk support to AMBA bus
infrastructure") changed AMBA bus to handle the PCLK automatically.
However, in EP93xx clock initialization is arch_initcall which is done
later than AMBA device identification. This causes
amba_get_enable_pclk() to fail resulting device where UARTs are not
functional.
So change ep93xx_clock_init() to be postcore_initcall.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
This reverts commit 4fa5518, which causes a compilation regression for
IXP4xx platforms.
Reported-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
ocfs2_create_inode_in_orphan() is used by reflink to create the newly
reflinked inode simultaneously in the orphan dir. This allows us to easily
handle partially-reflinked files during recovery cleanup.
We have a problem though - the orphan dir stringifies inode # to determine
a unique name under which the orphan entry dirent can be created. Since
ocfs2_create_inode_in_orphan() needs the space allocated in the orphan dir
before it can allocate the inode, we currently call into the orphan code:
/*
* We give the orphan dir the root blkno to fake an orphan name,
* and allocate enough space for our insertion.
*/
status = ocfs2_prepare_orphan_dir(osb, &orphan_dir,
osb->root_blkno,
orphan_name, &orphan_insert);
Using osb->root_blkno might work fine on unindexed directories, but the
orphan dir can have an index. When it has that index, the above code fails
to allocate the proper index entry. Later, when we try to remove the file
from the orphan dir (using the actual inode #), the reflink operation will
fail.
To fix this, I created a function ocfs2_alloc_orphaned_file() which uses the
newly split out orphan and inode alloc code to figure out what the inode
block number will be (once allocated) and then prepare the orphan dir from
that data.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
We do this because ocfs2_create_inode_in_orphan() wants to order locking of
the orphan dir with respect to locking of the inode allocator *before*
making any changes to the directory.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
This allows code which needs to know the eventual block number of an inode
but can't allocate it yet due to transaction or lock ordering. For example,
ocfs2_create_inode_in_orphan() currently gives a junk blkno for preparation
of the orphan dir because it can't yet know where the actual inode is placed
- that code is actually in ocfs2_mknod_locked. This is a problem when the
orphan dirs are indexed as the junk inode number will create an index entry
which goes unused (and fails the later removal from the orphan dir). Now
with these interfaces, ocfs2_create_inode_in_orphan() can run the block
group search (and get back the inode block number) *before* any actual
allocation occurs.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
ocfs2_search_chain() makes the same updates as
ocfs2_alloc_dinode_update_counts to the alloc inode. Instead of open coding
the bitmap update, use our helper function.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
Do this by splitting the bulk of the function away from the inode allocation
code at the very tom of ocfs2_mknod_locked(). Existing callers don't need to
change and won't see any difference. The new function created,
__ocfs2_mknod_locked() will be used shortly.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
commit(6b933c8e6f1a2f3118082c455eef25f9b1ac7b45).
The patch is to fix the regression bug brought from commit 6b933c8...( 'ocfs2:
Avoid direct write if we fall back to buffered I/O'):
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1285
The commit 6b933c8e6f1a2f3118082c455eef25f9b1ac7b45 changed __generic_file_aio_write
to generic_file_buffered_write, which didn't call filemap_{write,wait}_range to flush
the pagecaches when we were falling O_DIRECT writes back to buffered ones. it did hurt
the O_DIRECT semantics somehow in extented odirect writes.
This patch tries to guarantee O_DIRECT writes of 'fall back to buffered' to be correctly
flushed.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
We cannot call grab_cache_page() when holding filesystem locks or with
a transaction started as grab_cache_page() calls page allocation with
GFP_KERNEL flag and thus page reclaim can recurse back into the filesystem
causing deadlocks or various assertion failures. We have to use
find_or_create_page() instead and pass it GFP_NOFS as we do with other
allocations.
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
We were setting ac->ac_last_group in ocfs2_claim_suballoc_bits from
res->sr_bg_blkno. Unfortunately, res->sr_bg_blkno is going to be zero under
normal (non-fragmented) circumstances. The discontig block group patches
effectively turned off that feature. Fix this by correctly calculating what
the next group hint should be.
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
We have added discontig block group now, and now an inode
can be allocated in an discontig block group. So get
it in ocfs2_get_suballoc_slot_bit.
The old ocfs2_test_suballoc_bit gets group block no
from the allocation inode which is wrong. Fix it by
passing the right group.
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
When 'barrier' mount option is specified, we have to issue a cache flush
during fdatasync(2). We have to do this even if inode doesn't have
I_DIRTY_DATASYNC set because we still have to get written *data* to disk so
that they are not lost in case of crash.
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Singed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
__ocfs2_page_mkwrite now is broken in handling file end.
1. the last page should be the page contains i_size - 1.
2. the len in the last page is also calculated wrong.
So change them accordingly.
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
For local mounts, ocfs2_read_locked_inode() calls ocfs2_read_blocks_sync() to
read the inode off the disk. The latter first checks to see if that block is
cached in the journal, and, if so, returns that block. That is ok.
But ocfs2_read_locked_inode() goes wrong when it tries to validate the checksum
of such blocks. Blocks that are cached in the journal may not have had their
checksum computed as yet. We should not validate the checksums of such blocks.
Fixes ossbz#1282
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1282
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Cc: stable@kernel.org
Singed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
Like tools, the checksum validate function now prints the values in hex.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Singed-off-by: Tao Ma <tao.ma@oracle.com>
|
|
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux:
nfsd4: mask out non-access bits in nfs4_access_to_omode
|
